編號 |
中文名稱 |
英文名稱 |
ANSI/AISI/COS TS-6-2004
|
板式和錨式結構試驗標準程序
|
Standard Procedures for Panel and Anchor Structural Tests
|
ANSI/API SPEC2F-1997
|
系泊錨鏈
|
Mooring Chain
|
ANSI/ASTM E754-1980
|
埋入砌筑砂漿縫中的拉桿和錨的拉拔阻力的試驗方法
|
Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints (04.11)
|
ANSI/ASTM E894-1988
|
建筑物護欄和永久金屬護欄系統用錨固裝置的試驗方法
|
Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings (04.11)
|
ANSI/ASTM F765-1993
|
錨鏈輪規范.船錨鏈
|
Specification for Wildcats, Ship Anchor Chain
|
ANSI/ASTM F936-1997
|
巴拿馬錨用鑄鋼輪擋規范
|
Specification for Chocks, Panama, Mooring Cast Steel
|
ANSI/ASTM F937-1997
|
船錨用鑄鋼輪擋規范
|
Specification for Chocks, Ship Mooring, Cast Steel
|
ANSI/SAE J1369-1997
|
后座兒童減震系繩搭板錨固規定
|
Anchorage Provisions for Installation of Child Restraint Tether Straps in Rear Seating Positions
|
ASTM A 981-1997
|
評估預應力地下錨定裝置用270級未涂覆15.2mm(0.6in)直徑預應力鋼絞線結合強度的標準試驗方法
|
Standard Test Method for Evaluating Bond Strength for 15.2 mm (0.6 in.) Diameter Prestressing Steel Strand, Grade 270, Uncoated, Used in Prestressed Ground Anchors
|
ASTM C 1242-2005
|
規格石錨固系統的選擇、設計和安裝的標準指南
|
Standard Guide for Selection, Design, and Installation of Dimension Stone Anchoring Systems
|
ASTM D 4435-2004
|
石栓錨定拉力試驗的標準試驗方法
|
Standard Test Method for Rock Bolt Anchor Pull Test
|
ASTM E 1512-2001
|
測試粘接的錨的粘結性能的標準試驗方法
|
Standard Test Methods for Testing Bond Performance of Bonded Anchors
|
ASTM E 2265-2007
|
混凝土和磚石工程用錨和緊固件的標準術語
|
Standard Terminology for Anchors and Fasteners in Concrete and Masonry
|
ASTM E 488-1996
|
混凝土及砌塊構件中錨定強度的試驗方法
|
Standard Test Methods for Strength of Anchors in Concrete and Masonry Elements
|
ASTM E 754-1980
|
埋入磚石灰縫中的拉桿和錨的拔拉阻力的標準測試方法
|
Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
|
ASTM E 894-1988
|
建筑物用永久性金屬圍欄系統及圍欄的錨定試驗
|
Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
|
ASTM F 1554-2007
|
屈服應力為36、55和105ksi的鋼制錨固螺栓用標準規范
|
Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
|
ASTM F 2437-2006
|
與螺旋帽、螺栓、錨和螺柱用碳和合金鋼可壓縮墊圈式直讀張力指示器的標準規范
|
Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
|
ASTM F 765-1993
|
船用錨鏈及錨鏈輪
|
Standard Specification for Wildcats, Ship Anchor Chain
|
ASTM F 936-1985
|
巴拿馬鑄鋼船錨塞塊
|
Chocks, Panama, Mooring Cast Steel
|
ASTM F 937-1985
|
鑄鋼船錨塞塊
|
Chocks, Ship Mooring, Cast Steel
|
編號 |
中文名稱 |
英文名稱 |