| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 21521-1-1990 | 采礦和坑道掘進工程用錨桿.術語 | Rock bolts for mining and tunnelling; terms |
| DIN 21521-2-1993 | 礦井和隧道支護用錨桿.鋼制錨桿的通用規范.試驗、檢驗方法 | Rock bolts for mining and tunnel support; general specifications for steel-bolts; tests, testing methods |
| DIN 21522-1972 | 礦井和遂道支撐用防護錨栓板 | Roof bolt plates for mining and tunnel support |
| DIN 24536-1985 | 煉鋼廠和軋鋼機用設備.在技術圖紙上帶錨盒的地腳螺栓和T 型頭螺栓的圖形符號 | Equipment for steelworks and rolling mills; graphical symbols for stone bolts and tee head bolts with anchor boxes in technical drawings |
| DIN 24539-1-1985 | 冶金和軋鋼設備.按DIN261的T型頭螺栓用錨板.單塊錨板.尺寸、名稱、安裝深度 | Equipment for steelworks and rolling mills; anchor plates for tee head bolts according to DIN 261; single anchor plates; dimensions, designations, mounting depth |
| DIN 24539-2-1985 | 冶金和軋鋼設備.按DIN261的T 型頭螺栓用錨板.雙錨板.尺寸、名稱、安裝深度 | Equipment for steelworks and rolling mills; anchor plates for tee head bolts according to DIN 261; double anchor plates; dimensions, designations, mounting depth |
| DIN 24541-1985 | 煉鋼廠和軋鋼機用設備.按DIN24539的錨盒的模板吊桿.尺寸、標記 | Equipment for steelworks and rolling mills; shuttering steeves for anchor boxes according to DIN 24539; dimensions, designation |
| DIN 28158-1984 | 整體搪瓷錨式攪拌器.尺寸 | One piece glass lined anchor agitator; dimensions |
| DIN 48328-1943 | 1KV以下通信和電力架空線.錨桿 | Telecommunication and power current overhead lines below 1 kV; anchor logs |
| DIN 5683-2-1966 | 浮標錨鏈卸扣、錨轉環和轉鉤 | Buoy chains shackles, swivels, swivel hooks |
| DIN 65238-2002 | 航空航天.自鎖非浮動鋼制角緣帶MJ螺紋深埋頭錨定螺母.分類:1100MPa/235℃ | Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, non-floating, corner, steel; Classification: 1100 MPa/235 °C |
| DIN 65240-2002 | 航空航天.自鎖浮動鋼制雙耳帶MJ螺紋深埋頭錨定螺母.分類:1100MPa/235℃ | Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, two lug, steel; Classification: 1100 MPa/235 °C |
| DIN 65243-2002 | 航空航天.單耳浮動自鎖深埋頭帶MJ螺紋的鋼制錨定螺母.分類:1100MPa/235℃ | Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, single lug, steel; Classification: 1100 MPa/235 °C |
| DIN 65343-2002 | 航空航天.雙耳減縮自鎖深埋頭帶MJ螺紋的鋼制錨定螺母.分類:1100MPa/235℃ | Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, two lug, reduced, steel; Classification: 1100 MPa/235 °C |
| DIN 65347-2002 | 航空航天.單耳自鎖深埋頭帶MJ螺紋的鋼制錨定螺母.分類:1100MPa/235℃ | Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, single lug, steel; Classification: 1100 MPa/235 °C |
| DIN 7952-1-1986 | 螺紋式金屬板錨具.第1部分:尺寸 | Sheet metal anchorage with threads; dimensions |
| DIN 81834-2000 | 錨定設備元部件.術語和定義 | Components for anchoring equipment - Terms and definitions |
| DIN 81835-2001 | 錨鏈鎖.計算單位的基礎 | Anchor chain cables - Basis for calculation units |
| DIN 81846-2-2007 | K4級螺柱連接的錨鏈纜索.裝配作用力和破壞力.第2部分:B型無鏈條外側連接節.德文和英文版 | Stud link anchor chain cables, Grade K4 - Assembly, applied forces and breaking forces - Part 2: Type B without chain outboard shots; Text in German and English |
| DIN 81850-2007 | K4級螺柱連接的錨鏈纜索.端部鏈節.德文和英文版 | Stud link anchor chain cables, Grade K4 - End links; Text in German and English |
| DIN 81860-1-1999 | 船舶上錨鏈索的端部緊固.第1部分:組裝 | End fastenings for anchor chain cables on board ships - Part 1: Assembly |
| DIN 81860-2-1999 | 艦船上的錨鏈鋼纜端部緊固裝置.第2部分:部件 | End fastenings for anchor chain cables on board ships - Part 2: Components |
| DIN 81902-1998 | 滾柱導纜器 | Roller fairleads |
| DIN 84525-1999 | 起錨機和鉸盤.錨鏈用鋼索提升器.設計尺寸 | Windlasses and anchor capstans - Cable lifters for anchor chains - Design dimensions |
| DIN EN 13573-2001 | 內河運輸船只.拋錨、連接、拖曳、牽引和停泊系統 | Inland navigation vessels - Anchoring, coupling, towing, hauling and mooring systems; German version EN 13573:2001 |
| DIN EN 14330-2004 | 內河航行船舶.無嵌釘?shù)腻^鏈.圓鋼環節鏈 | Inland navigation vessels - Studless anchor chain - Round steel link chain; German version EN 14330:2003 |
| DIN EN 14606-2004 | 內河船舶.無栓錨鏈.附件 | Inland navigation vessels - Studless anchor chain - Accessories; German version EN 14606:2004 |
| DIN EN 14874-2006 | 內河航行船只.無檔錨鏈.錨鏈輪.德文版本 EN 14874-2005 | Inland navigation vessels - Studless anchor chain - Cable lifter; German version EN 14874:2005 |
| DIN EN 1504-6-2006 | 混凝土結構保護和維修用產品和系統.定義、要求、質量控制和合格評定.第6部分:修補鋼棒的錨定 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar; English version of DIN EN 1504-6:2006-11 |
| DIN EN 15271-2007 | 內河航行船舶.無檔錨鏈.錨設備 | Inland navigation vessels - Studless anchor chain - Anchor equipment; German version EN 15271:2007 |
| DIN EN 15272-2-2007 | 內河航行船舶.繩索導向設備.第2部分:導纜器 | Inland navigation vessels - Equipment for rope leading - Part 2: Fairlead; German version EN 15272-2:2007 |
| DIN EN 15361-2007 | 蒸壓加氣混凝土預制加筋構件中腐蝕防護覆層對橫向錨桿的錨固能力影響的測定 | Determination of the influence of the corrosion protection coating on the anchorage capacity of the transverse anchorage bars in prefabricated reinforced components of autoclaved aerated concrete; German version EN 15361:2007 |
| DIN EN 1537-2001 | 特殊土工作業.地錨 | Execution of special geotechnical works - Ground anchors; German version EN 1537:1999 + AC:2000 |
| DIN EN 1881-2007 | 保護和修復混凝土結構的產品和系統.試驗方法.用拔拉法測試錨定產品 | Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method; English version of DIN EN 1881:2007-01 |
| DIN EN 959-2007 | 登山運動器材.巖石錨定.安全要求和試驗方法 | Mountaineering equipment - Rock anchors - Safety requirements and test methods; German version EN 959:2007 |
| DIN EN ISO 15084-2003 | 小艇.投錨、停泊和牽引.堅固支撐點 | Small craft - Anchoring, mooring and towing - Strong points (ISO 15084:2003); German version EN ISO 15084:2003 |
| DIN ISO 3730-1990 | 造船.錨泊絞盤 | Shipbuilding; mooring winches; identical with ISO 3730:1988 |
| DIN ISO 4568-1995 | 造船.遠洋海輪.卷揚機和起錨機 (ISO 4568:1986) | Shipbuilding - Sea-going vessels - Windlasses and anchor capstans (ISO 4568:1986) |
| DIN V 81833-1999 | 錨鏈設備的元件.概覽 | Components for anchoring equipment - Survey |
| DIN V 81841-1999 | K4 級錨鏈鋼纜.要求和試驗 | Anchor chain cables grade K4 - Requirements and test |
| DIN V 81851-1999 | K4 級錨鏈鋼纜.斜連接鉤環 | Anchor chain cables grade K4 - Kenter type joining shackles |
| DIN V 81855-1999 | K4 級錨鏈鋼纜.鏈條外側連接節 | Anchor chain cables grade K4 - Chain outboard shots |
| 編號 | 中文名稱 | 英文名稱 |