| 編號 | 中文名稱 | 英文名稱 |
|---|
| ANSI A10.11-1989
| 建筑施工和拆除工作.人員安全和碎片攔截網
| Construction and Demolition Operations - Personnel and Debris Nets
|
| ANSI A10.15-1995
| 建筑施工和拆除工作.挖泥作業的安全要求
| Construction and Demolition Operations - Dredging, Safety Requirements for
|
| ANSI A10.16-1995
| 建筑施工和拆除工作.隧道、豎井和藻井的安全要求
| Construction and Demolition Operations - Safety Requirements for Tunnels, Shafts, and Caissons
|
| ANSI A10.33-1992
| 建筑施工和拆除工程.安全和衛生大綱.多雇員參與的工程項目的要求
| Construction and demolition operations - Safety and health programm - Requirements for multi-employer projects
|
| ANSI A10.34-2001
| 建筑地點及其附近的公共區域的保護
| Protection of the Public on and Adjacent to Construction Sites
|
| ANSI A10.42-2000
| 建筑工業中起重設備的合格鑒定和可靠性
| Rigging Qualifications and Responsibilities in the Construction Industry
|
| ANSI A10.7-1998
| 建筑施工和拆除.商業炸藥和起爆劑.運輸、存儲、裝卸和使用的安全要求
| Construction and Demolition - Commercial Explosives and Blasting Agents - Safety Requirements for Transportation, Storage, Handling and Use
|
| ANSI A10.9-1997
| 建筑施工和拆除工作.混凝土和圬工作業
| Construction and Demolition Operations - Concrete and Masonry Work
|
| ANSI ATIS0600318-2005
| 消費者建筑或建筑物出口處電信網絡設備的電氣保護
| Electrical Protection Applied to Telecommunications Network Plant at Entrances to Customer Structures or Buildings
|
| ANSI FM4880-2001
| 1級防火試驗標準:A)絕緣墻或墻壁和天花板或屋頂;B)塑料內部終飾材料;C)塑料外部建筑面板;D)墻和墻和天花板
| Fire Test Standard for Class 1: A) Insulated Wall or Walls and Ceilings or Roofs; B) Plastic Interior Finish Materials; C) Plastic Exterior Building Panels; D) Wall and Wall and Ceiling Coating Systems; E) Interior or Exterior Finish Systems
|
| ANSI O5.1c-2004
| ANSI O5.1-2002的補充件.木桿.公用建筑用結構膠合板
| Supplement to ANSI O5.1-2002- Wood Poles - Structural Glued Laminated Timber for Utility Structures
|
| ANSI O5.2-2006
| 公用事業建筑用建筑層壓膠合板(木制品用)
| Structural Glued Laminated Timber for Utility Structures (for Wood Products)
|
| ANSI S2.71-1983
| 評估人體暴露在建筑物震動環境中指南
| Guide to the Evaluation of Human Exposure to Vibration in Buildings
|
| ANSI S3.29-1983
| 在建筑物中人體感受振動的評測指南
| Guide to the evaluation of human exposure to vibration in buildings
|
| ANSI Y32.4-1977
| 建筑結構和樓房結構示意圖中管路設施的圖形符號
| Graphic symbols for plumbing fixtures for diagrams used in architecture and building construction
|
| ANSI Z83.7a Addenda-1991
| 建筑物的燃氣加熱器.補充件
| Gas-fired construction heaters; Addenda
|
| ANSI Z83.7a-2007
| 燃氣建筑物加熱器(同CSA 2.14a)
| Gas-Fired Construction Heaters (same as CSA 2.14a)
|
| ANSI Z83.7b Addenda-1993
| 建筑物燃氣加熱器.補充件
| Gas-fired construction heaters; Addenda
|
| ANSI Z83.7b-1993
| 建筑物燃氣加熱器.補充件
| Gas-fired construction heaters; Addenda
|
| ANSI Z97.1-2004
| 建筑物中窗用玻璃材料的安全性能規范和測試方法
| Glazing Materials Used in Buildings, Safety Performance Specifications and Methods of Test
|
| ANSI/AFPA NDS-1997
| 木質建筑的國家設計規范
| National Design Specification for Wood Construction
|
| ANSI/AIHA Z9.3-2007
| 噴涂操作.設計、建筑和通風安全代碼
| Spray Finishing Operations-Safety Code for Design, Construction, and Ventilation
|
| ANSI/AISC 341-2005
| 結構鋼建筑物的有關地震條款
| Seismic Provisions for Structural Steel Buildings
|
| ANSI/AISC 341s1-2005
| 對結構鋼建筑物地震條款的補充件1
| Supplement No. 1 to the Seismic Provisions for Structural Steel Buildings
|
| ANSI/AISC 360-2005
| 結構鋼建筑物的規范
| Specification for Structural Steel Buildings
|
| ANSI/ASAE EP484.2-1998
| 包金屬的柱式框架矩形建筑物的結構和橫隔梁
| Diaphragm, Design of Metal-Clad Post-Frame Rectangular Buildings
|
| ANSI/ASAE S354.5-2006
| 農場及其建筑物設施的安全性
| Safety for Farmstead Equipment
|
| ANSI/ASAE S401.2-1993
| 農用建筑物中絕熱材料的應用指南
| Guidelines for Use of Thermal Insulation in Agricultural Buildings
|
| ANSI/ASHRAE 105-2007
| 測量、表達和比較建筑物能量性能的標準方法
| Standard Methods of Measuring, Expressing and Comparing Building Energy Performance
|
| ANSI/ASHRAE 135-1995
| BAC 網.建筑自動化和控制網 A 數據電信協議
| BACnet - A Data Communication Protocol for Building Automation and Control Networks
|
| ANSI/ASHRAE 135a-2005
| BAC網.建筑自動化和控制網絡的數據通信協議
| BACnet - A Data Communication Protocol for Building Automation and Control Networks
|
| ANSI/ASHRAE 135b-2001
| BAC網.建筑自動化和控制網絡用數據通信協議
| BACNET - A Data Communication Protocol for Building Automation and Control Networks
|
| ANSI/ASHRAE 140-2001
| 評估建筑物能量分析計算機程序的標準試驗方法
| Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
|
| ANSI/ASHRAE 140a-2007
| 建筑物能源分析計算機程序的評估用試驗標準方法
| Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
|
| ANSI/ASHRAE 140b-2007
| 評估建筑物能量分析計算機程序的標準試驗方法
| Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
|
| ANSI/ASHRAE 169-2006
| 用于建筑設計的氣象資料標準
| Weather Data for Building Design Standards
|
| ANSI/ASHRAE 169a-2006
| 建筑物設計標準的天氣數據
| Weather Data for Building Design Standards
|
| ANSI/ASHRAE 62.2a-2004
| 低層住宅建筑物的通風和合格的室內空氣質量.修改件a
| Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings, Addendum a
|
| ANSI/ASHRAE 62.2b-2004
| 低層住宅建筑物的通風和合格的室內空氣質量
| Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings
|
| ANSI/ASHRAE 62.2e-2007
| 低層住宅建筑中的通風設備和達標室內空氣質量
| Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings
|
| ANSI/ASHRAE 62.2g-2006
| 低層住宅建筑物的通風及合格的室內空氣質量
| Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings
|
| ANSI/ASHRAE 62.2h-2007
| 低層住宅建筑中的通風設備和達標室內空氣質量
| Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings
|
| ANSI/ASHRAE 62.2i-2007
| 低層住宅建筑中的通風設備和達標室內空氣質量
| Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings
|
| ANSI/ASHRAE 62.2k-2007
| 低層住宅建筑物中的通風和可接受室內空氣質量
| Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings
|
| ANSI/ASHRAE 62.2P-2003
| 低層住宅建筑物中的通風和可接受的室內空氣質量
| Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings
|
| ANSI/ASHRAE 62af-2003
| 商業、機關團體的和高層住宅建筑物的通風和達標的室內空氣質量.附錄af
| Ventilation and Acceptable Indoor Air Quality in Commercial, Institutional, and High-Rise Residential Buildings, Addenda af
|
| ANSI/ASHRAE 62n-2004
| 商用、公共機構和高層住宅建筑物的通風和達標的室內空氣質量.補充件n
| Ventilation and Acceptable Indoor Air Quality in Commercial, Institutional, and High-Rise Residential Buildings, Addenda n
|
| ANSI/ASHRAE 62r-2003
| 商業、機關團體的和高層住宅建筑物的通風和達標的室內空氣質量.附錄r
| Ventilation and Acceptable Indoor Air Quality in Commercial, Institutional, and High-Rise Residential Buildings, Addenda r
|
| ANSI/ASHRAE 62z-2003
| 商業、機關團體和高層住宅建筑物的通風和達標的室內空氣質量.附錄z
| Ventilation and Acceptable Indoor Air Quality in Commercial, Institutional, and High-Rise Residential Buildings, Addenda z
|
| ANSI/ASHRAE 90.2-2007
| 新型低層住宅建筑物的能量有效性設計
| Energy Efficient Design of New Low-Rise Residential Buildings
|
| ANSI/ASHRAE 90.2k-2007
| 低層住宅建筑物的能量有效性設計
| Energy Efficient Design of Low-Rise Residential Buildings
|
| ANSI/ASHRAE/ACCA 183P-2007
| 除低層住宅建筑外的建筑物冷熱負荷計算的極值
| Peak Cooling and Heating Load Calculations in Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 100-2006
| 現有建筑物的能源保護
| Energy Conservation in Existing Buildings
|
| ANSI/ASHRAE/IESNA 90.1-2007
| 除低層住宅建筑物(包括附加物B、C、D、E、F、G、I和M)外新型建筑物的能量有效性設計
| Energy Efficient Design of New Buildings Except Low-Rise Residential Buildings (Including Addenda B, C, D, E, F, G, I and M)
|
| ANSI/ASHRAE/IESNA 90.1a-2007
| 除低層住宅建筑外的建筑物能量標準
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1aa-2007
| 除低層住宅建筑外建筑物用能量標準
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1ab-2007
| 除低層住宅建筑外建筑物用能量標準
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1ac-2007
| 除低層住宅建筑外建筑物的能量標準
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1ae-2007
| 除低層住宅建筑外建筑物的能量標準
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1ag-2007
| 除低層住宅建筑外建筑物用能量標準
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1ah-2007
| 除低層住宅建筑外的建筑物用能量標準
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1ai-2007
| 除低層住宅建筑外建筑物的能量標準
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1al-2007
| 除低層住宅建筑外建筑物的能量標準
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1an-2007
| 除低層住宅建筑外建筑物的能量標準
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1ao-2007
| 除低層住宅建筑外建筑物的能量標準
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1ap-2001
| 除層數低而無電梯的住宅樓房外的建筑物的能量標準
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1ap-2007
| 除低層住宅建筑外建筑物用能量標準
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1aq-2007
| 除低層住宅建筑外的建筑物能量標準
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1ar-2007
| 除低層住宅建筑外的建筑物能源標準
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1av-2007
| 除低層住宅建筑外的建筑物能量標準
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1b-2007
| 除低層住宅建筑外的建筑物能量標準
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1y-2007
| 除低層住宅建筑外建筑物的能量標準
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.2c-2007
| 低層住宅建筑的能效設計
| Energy Efficient Design of Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.2d-2007
| 低層住宅建筑的能效設計
| Energy Efficient Design of Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.2e-2007
| 低層住宅建筑的能效設計
| Energy Efficient Design of Low-Rise Residential Buildings
|
| ANSI/ASME A120.1-2006
| 建筑物維護用動力升降工作臺、移動梯和構架的安全要求
| Safety Requirements for Powered Platforms and Traveling Ladders and Gantries for Building Maintenance
|
| ANSI/ASME B18.2.6-2006
| 建筑結構中緊固件的使用
| Fasteners for Use in Structural Applications
|
| ANSI/ASME B31.9-2004
| 建筑物服務設施用壓力管道標準
| Building Services Piping Code for Pressure Piping
|
| ANSI/ASSE A10.40-2007
| 建筑中工人慢性肌肉骨骼損傷的減少量
| Reduction of Musculoskeletal Problems in Construction
|
| ANSI/ASTM D4226-2000
| 剛性聚氯乙烯(PVC)建筑產品沖擊試驗方法(95-1, Item 42) (08.02)
| Test Method for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products (95-1, Item 42) (08.02)
|
| ANSI/ASTM D4397-1991
| 建筑、工業和農業用聚乙烯板材規格
| Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications (08.03)
|
| ANSI/ASTM D4803-1997
| 預測聚氯乙烯建筑產品熱積累的試驗方法
| Test Method for Predicting Heat Buildup in PVC Building Products
|
| ANSI/ASTM E119-2007
| 建筑結構和材料著火試驗的試驗方法
| Test Methods for Fire Tests of Building Construction and Materials
|
| ANSI/ASTM E1334-1995
| 建筑物或設施的耐用額定值的制定實施規程(04.11)
| Practice for Preparing a Serviceability Rating of a Building or Facility (04.11)
|
| ANSI/ASTM E1410-1991
| 住宅建筑物用能量評價的規定數據的實施規程(04.11)
| Practice for Specifying Data for Evaluation of Energy Used in Residential Buildings (04.11)
|
| ANSI/ASTM E1464-1992
| 商業和科研院所建筑物或設施的能量監測協議制定指南
| Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities (04.11)
|
| ANSI/ASTM E1480-1992
| 設施(與建筑有關的) 管理術語
| Terminology of Facility Management (Building-Related) (04.11)
|
| ANSI/ASTM E1494a-1992
| 含石棉易碎建筑材料密封劑噴涂或鏝刀涂抹規程
| Practice for Encapsulants for Spray-or-Trowel-Applied Friable Asbestos-Containing Building Materials (04.11)
|
| ANSI/ASTM E1553-1993
| 在清除和建筑活動中收集的空氣中鉛顆粒的實施規程(04.11)
| Practice for Collection of Airborne Particulate Lead During Abatement and Construction Activities (04.11)
|
| ANSI/ASTM E1585-1993
| 利用光譜測定法測量和計算建筑結構平面玻璃輻射密度的方法
| Test Method for Measuring and Calculating Emittance of Architectural Flat Glass Products using Spectrometric Measurements
|
| ANSI/ASTM E1670-1995
| 辦公設施關于操作和維護管理用建筑物性能的適用性分類
| Classification for Serviceability of an Office Facility on Performance of Buildings for Management of Operations and Maintenance (04.11)
|
| ANSI/ASTM E1679-1995
| 對建筑物或建筑物相關設施制定適用性要求的實施規程(04.11)
| Practice for Setting Requirements for Serviceability of a Building or Building-Related Facility (04.11)
|
| ANSI/ASTM E1699-1995
| 建筑物和建筑物系統進行價值分析的實施規程
| Practice for Performing Value Analysis (VA) of Buildings and Building Systems (04.11)
|
| ANSI/ASTM E1700-1995
| 辦公設施關于結構和建筑物圍護結構適用性的分類
| Classification for Serviceability of an Office Facility for Structure and Building Envelope (04.11)
|
| ANSI/ASTM E1836-2002
| 設備管理用建筑物地板面積測量的標準分類
| Standard Classification for Building Floor Area Measurements for Facility Management
|
| ANSI/ASTM E2026-2007
| 建筑物地震損傷性估計指南
| Guide for Estimation of Building Damageability in Earthquakes
|
| ANSI/ASTM E2127-2001
| 建筑物結構隔墻系統抗拉伸與橫向荷載組合的靜荷載試驗方法
| Test Methods for Static Load Test for Combined Tensile and Transverse Load Resistance of Panel Wall Systems in Building Construction
|
| ANSI/ASTM E2128-2001
| 建筑墻體漏水性評價指南
| Guide for Evaluating Water Leakage of Building Walls
|
| ANSI/ASTM E329a-2006
| 建筑材料的測試和/或驗收機構的規范
| Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction
|
| ANSI/ASTM E541-2002
| 建造建筑物系統分析和符合性保證從業機構資質準則
| Criteria for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building
|
| ANSI/ASTM E564-1995
| 建筑物構架墻抗剪強度的靜態載荷的試驗方法
| Method of Static Load Test for Shear Resistance of Framed Walls for Buildings (04.11)
|
| ANSI/ASTM E631-1993
| 建筑術語
| Terminology of Building Construction (04.11)
|
| ANSI/ASTM E651-2002
| 建造建筑物的系統分析和符合性保證從業機構能力評價導則
| Guidelines for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building
|
| ANSI/ASTM E84b-2006
| 建筑物材料表面燃燒特征的試驗方法
| Test Method for Surface Burning Characteristics of Building Materials
|
| ANSI/ASTM E894-1988
| 建筑物護欄和永久金屬護欄系統用錨固裝置的試驗方法
| Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings (04.11)
|
| ANSI/ASTM F940-2000
| 海上建筑物及造船用保護性涂料的質量控制驗收檢驗程序的標準操作規程
| Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
|
| ANSI/AWS D14.3/D 14.3M-2005
| 焊接、土方、建筑和農業設備的規范
| Specification for Welding, Earthmoving, Construction, and Agricultural Equipment
|
| ANSI/BHMA A156.6-2005
| 建筑門框的細木工
| Architectural Door Trim
|
| ANSI/BSR/TIA-569-B-2005
| 遠程通信通道和空間的商業建筑標準
| Commercial Building Standard for Telecommunications Pathways and Spaces
|
| ANSI/IAS LC-2-1996
| 農牧圈飼建筑物用直接燃氣式循環加熱器
| Direct Gas-Fired Circulating Heaters for Agricultural Animal Confinement Buildings
|
| ANSI/ICC 400-2007
| 原木結構設計、建筑和性能標準
| Standard on Design, Construction and Performance of Log Structures
|
| ANSI/ICC A117.1-2003
| 可接近的可用建筑物和設施
| Accessible and Useable Buildings and Facilities
|
| ANSI/IEEE 241-1991
| 商業建筑物中電力系統(灰皮書)
| Electric Power Systems in Commercial Buildings (Gray Book)
|
| ANSI/NECA 104-2006
| 安裝鋁建筑電線和電纜的推薦規程
| Recommended Practice for Installing Aluminum Building Wire and Cable
|
| ANSI/NECA 568-2006
| 安裝商用建筑物通信電纜標準
| Standard for Installing Commercial Building Telecommunications Cabling
|
| ANSI/NEMA WC63.2-1996
| 建筑物內數據同軸通信電纜的性能標準
| Performance Standard for Coaxial Premise Data Communications Cables
|
| ANSI/NFPA 1144-2007
| 荒地火災中減少建筑試驗著火危害的標準
| Standard for Reducing Structure Ignition Hazards from Wildland Fire
|
| ANSI/NFPA 1145-2006
| 在人工建筑救火中A級泡沫的使用指南
| Guide for the Use of Class A Foams in Manual Structural Fire Fighting
|
| ANSI/NFPA 1402-2006
| 建筑物防火服務培訓中心指南
| Guide to Building Fire Service Training Centers
|
| ANSI/NFPA 1851-2007
| 建筑消防防護全套部件的選擇、保養和維護用標準
| Standard on Selection, Care, and Maintenance of Structural Fire Fighting Protective Ensemble Elements
|
| ANSI/NFPA 1971-2000
| 建筑物消防用防護服
| Protective Clothing for Structural Fire Fighting
|
| ANSI/NFPA 220-2006
| 房屋建筑類型
| Types of Building Construction
|
| ANSI/NFPA 241-2004
| 建筑物改建及拆除的安全防護
| Safeguarding Construction, Alteration, and Demolition Operations
|
| ANSI/NFPA 251-2006
| 房屋建筑和建筑材料的著火試驗方法
| Methods of Fire Tests of Building Construction and Materials
|
| ANSI/NFPA 255-2006
| 建筑材料表面燃燒特性的標準試驗方法
| Standard Method of Test of Surface Burning Characteristics of Building Materials
|
| ANSI/NFPA 259-2003
| 建筑材料潛在熱的標準試驗方法
| Standard Test Method for Potential Heat of Building Materials
|
| ANSI/NFPA 415-2008
| 機場終點建筑、油料管道和裝載道標準
| Standard on Airport Terminal Buildings, Fueling Ramp Drainage, and Loading Walkways
|
| ANSI/NFPA 5000-2006
| 房屋建筑和安全規范T
| Building Construction and Safety CodeT
|
| ANSI/NFPA 703-2006
| 建筑材料用阻燃處理木材和阻燃涂層標準
| Standard for Fire-Retardant Treated Wood and Fire-Retardant Coatings for Building Materials
|
| ANSI/NFPA 80A-2007
| 建筑物外部防火的推薦實施規程
| Recommended Practice for Protection of Buildings from Exterior Fire Exposures
|
| ANSI/NFPA 900-2006
| 建筑物能源法規
| Building Energy Code
|
| ANSI/NFPA 914-2001
| 古建筑的修復和重新使用
| Rehabilitation and Adaptive Reuse of Historic Structures
|
| ANSI/SAE J1614-1998
| 建筑、農業和野外作業機器的布線系統
| Wiring Distribution Systems for Construction, Agricultural, and Off-Road Work Machines
|
| ANSI/SAE J370-1998
| 建筑和工業機械用螺栓和有頭螺釘尺寸
| Bolt and Capscrew Sizes for Use in Construction and Industrial Machinery
|
| ANSI/SAE J386-1997
| 建筑機械用座位安全帶
| Seat Belts for Construction Machines
|
| ANSI/SAE J572-1993
| 建筑和工業機器用密封照明裝置的要求
| Requirements for Sealed Lighting Unit for Construction and Industrial Machines
|
| ANSI/SAE J598-1994
| 用于建筑、工業和林業機械的密封照明裝置
| Sealed Lighting Units for Construction, Industrial, and Forest Machinery
|
| ANSI/TIA J-STD607-A-2002
| 商用建筑物的電信接地和連接安全性要求
| Commercial Building Grounding and Bonding Requirements for Telecommunications
|
| ANSI/TIA-568-B.1-1-2001
| 商用建筑電信電纜敷設標準.第1部分:一般要求.補充件1.4對UTP和4對ScTP插塞式電纜的最小彎曲半徑
| Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 1 - Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius
|
| ANSI/TIA-568-B.1-2-2003
| 商用建筑電信電纜敷設標準.第1部分:一般要求.補充件2.屏蔽電纜水平敷設的接地和連接規范
| Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 2 - Grounding and Bonding Specifications for Screened Horizontal Cabling
|
| ANSI/TIA-568-B.1-2001
| 商用建筑電信電纜敷設標準
| Commercial Building Telecommunications Cabling Standard
|
| ANSI/TIA-568-B.1-3-2003
| 商用建筑電信電纜敷設標準.第1部分:一般要求.補充件3.根據纖維類型決定的光纖設備的可支持距離和信道衰減
| Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 3 - Supportable Distances and Channel Attenuation for Optical Fiber Applications by Fiber Type
|
| ANSI/TIA-568-B.1-4-2003
| 商用建筑電信電纜敷設標準.第1部分:一般要求.補充件4. 第6類850nm激光優選的50/125微米多模纖維的鑒別
| Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber
|
| ANSI/TIA-568-B.1-5-2004
| 商業建筑物電信電纜連接標準.第1部分:一般要求.附錄5:電信附件用電信電纜連接
| Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 5 - Telecommunications Cabling for Telecommunications Enclosures
|
| ANSI/TIA-568-B.2-1-2002
| 商用建筑電信電纜敷設標準.第2部分:對稱雙絞合線部件.補充件1.4對100歐姆的第6類敷設電纜的傳輸性能規范
| Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Components - Addendum 1 - Transmission Performance Specifications for 4-Pair 100 Ohm Category 6 Cabling
|
| ANSI/TIA-568-B.2-11-2005
| 商用建筑電信電纜敷設標準.第2部分:平衡雙絞線電纜組件.補充件11.增加4對UTP和ScTP電纜直徑的規范
| Commercial Building Telecommunications Cabling Standard - Part2: Balanced Twisted-Pair Cabling Components - Addendum 11: Specification for Increased Diameter of 4-Pair UTP and ScTP Cables
|
| ANSI/TIA-568-B.2-2-2001
| 商用建筑電信電纜敷設標準.第2部分:對稱雙絞合線電纜敷設
| Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling
|
| ANSI/TIA-568-B.2-2001
| 商用建筑電信電纜敷設標準.第2部分:平衡絞合的成對電纜敷設
| Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling
|
| ANSI/TIA-568-B.2-3-2002
| 商用建筑電信電纜敷設標準.第2部分:對稱雙絞合線電纜敷設.補充件3.插入損耗和回波損耗通過/失效確定的附加
| Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling - Addendum 3 - Additional Considerations for Insertion Loss and Return Loss Pass/Fail Determination
|
| ANSI/TIA-568-B.2-4-2002
| 商用建筑電信電纜敷設標準.第2部分:對稱雙絞合線電纜敷設.補充件4.銅制連接硬件的無釬焊連接的可靠性要求
| Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 4 - Solderless Connection Reliability Requirements for Copper Connecting Hardware
|
| ANSI/TIA-568-B.2-5-2003
| 商用建筑電信電纜敷設標準.第2部分:對稱雙絞線電纜敷設元件.附錄5
| Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 5
|
| ANSI/TIA-568-B.2-6-2003
| 商用建筑物電信電纜敷設標準.第2部分:對稱雙絞電路敷設元件.補充件6:6類相關元件試驗方法
| Commercial Building Telecommunicatins Cabling Standard - Part 2: Balanced Twisted-Pair Cabling Components - Addendum 6 - Category 6 Related Component Test Procedures
|
| ANSI/TIA-568-B.2-9-2007
| 商用建筑物電信敷設電纜標準.第2部分:平衡雙絞線鋪設電纜元件.補充件9:附加分類6平衡要求和測量程序
| Commercial Building Telecommunications Cabling Standard - Part 2: - Balanced Twisted-Pair Cabling Components - Addendum 9 - Additional Category 6 Balance Requirements and Mesurement Procedures
|
| ANSI/TIA-568-B.2-9-200x-2005
| 商用建筑電信電纜敷設標準.第2部分：平衡雙絞線電纜組件.補充件9.附加分類6平衡要求和測量過程
| Commercial Building Telecommunications Cabling Standard - Part 2: - Balanced Twisted-Pair Cabling Components - Addendum 9 - Additional Category 6 Balance Requirements and Mesurement Procedures
|
| ANSI/TIA-606-A-2002
| 商用建筑的電信基礎設施的管理標準
| Administration Standard for the Telecommunications Infrastructure of Commercial Buildings
|
| ANSI/TIA-862-2002
| 商用建筑物的建筑自動化系統的電纜敷設標準
| Building Automation Systems Cabling Standard for Commercial Buildings
|
| ANSI/TIA/EIA 568-B.1-1-2001
| 商用建筑電信電纜標準.第1部分:一般要求.補充件 1.最小四對UTP和四對ScTP接插電纜彎曲半徑
| Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 1 - Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius
|
| ANSI/TIA/EIA 568-B.1-2-2003
| 商用建筑電信電纜敷設標準.第1部分:一般要求.附錄2.鎧裝水平電纜敷設的接地和連接規范
| Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 2 - Grounding and Bonding Specifications for Screened Horizontal Cabling
|
| ANSI/TIA/EIA 568-B.1-2001
| 商用建筑物電信電纜敷設標準
| Commercial Building Telecommunications Cabling Standard
|
| ANSI/TIA/EIA 568-B.1-3-2003
| 商用建筑電信電纜敷設標準.第1部分:一般要求.附錄3.根據纖維類型決定的光纖設備的可支持距離和信道衰減
| Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 3 - Supportable Distances and Channel Attenuation for Optical Fiber Applications by Fiber Type
|
| ANSI/TIA/EIA 568-B.1-4-2003
| 商用建筑電信電纜敷設標準.第1部分:一般要求.附錄4.類別6、850nm激光優選50/125微米多模纖維
| Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber
|
| ANSI/TIA/EIA 568-B.2-1-2002
| 商用建筑電信電纜敷設標準.第2部分:對稱絞線對元件.補充1.四線對100 OHM 6類電纜敷設傳輸性能規范
| Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Components - Addendum 1 - Transmission Performance Specifications for 4-Pair 100 Ohm Category 6 Cabling
|
| ANSI/TIA/EIA 568-B.2-2-2001
| 商用建筑物電信電纜敷設標準.第2部分:雙絞線對稱電纜敷設
| Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling
|
| ANSI/TIA/EIA 568-B.2-2001
| 商用建筑物電信電纜敷設標準.第2部分:對稱絞線對電纜敷設
| Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling
|
| ANSI/TIA/EIA 568-B.2-3-2002
| 商用建筑電信電纜敷設標準.第2部分:平衡絞線對電纜.補充件3:插入損耗和回波損耗通過/失敗測定的附加考慮
| Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling - Addendum 3 - Additional Considerations for Insertion Loss and Return Loss Pass/Fail Determination
|
| ANSI/TIA/EIA 568-B.2-4-2002
| 商用建筑電信電纜敷設標準.第2部分:對稱絞線對電纜敷設元件.補充4.銅制連接零件的非釬焊連接可靠性要求
| Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 4 - Solderless Connection Reliability Requirements for Copper Connecting Hardware
|
| ANSI/TIA/EIA 569-A-1-2000
| 商用建筑的電信通道和空間
| Commercial Building Telecommunications Pathways and Spaces
|
| ANSI/TIA/EIA 569-A-1998
| 電信通道和空間的商用建筑標準
| Commercial Building Standard for Telecommunications Pathways and Spaces
|
| ANSI/TIA/EIA 569-A-3-2000
| 商用建筑的電信通道和空間標準.進出樓面口
| Commercial Building Standard for Telecommunications Pathways and Spaces - Access Floor
|
| ANSI/TIA/EIA 569-A-4-2000
| 電信通道和空間的商用建筑標準
| Commercial Building Standard for Telecommunications Pathways and Spaces
|
| ANSI/TIA/EIA 569-A-5-2001
| 商用建筑物電信布線標準.補充件5.地板內的系統
| Commercial Building Telecommunications Cabling Standard - Addendum 5 - In-Floor Systems
|
| ANSI/TIA/EIA 569-A-6-2001
| 電信通路和空間用電信商業建筑標準.補充件6.多租戶通路和空間
| Commercia Building Standard for Telecommunications Pathways and Spaces - Addendum 6 - Multi-Tenant Pathways and Spaces
|
| ANSI/TIA/EIA 606-A-2002
| 商用建筑的電信基礎設施的管理標準
| Administration Standard for the Telecommunications Infrastructure of Commercial Buildings
|
| ANSI/TIA/EIA 862-2002
| 商用建筑物用建筑物自動化系統電纜敷設標準
| Building Automation Systems Cabling Standard for Commercial Buildings
|
| ANSI/TIA/EIA J-STD607-A-2002
| 民用建筑遠距通信接地和搭接要求
| Commercial Building Grounding and Bonding Requirements for Telecommunications
|
| ANSI/UL 103-2006
| 工廠制住宅型煙囪和建筑物供暖設備的安全標準
| Standard for Safety for Factory-Built Chimneys for Residential Type and Building Heating Appliances
|
| ANSI/UL 1040-2001
| 建筑絕熱墻耐火試驗安全性標準
| Standard for Safety for Fire Test for Insulated Wall Construction
|
| ANSI/UL 2079-2006
| 建筑物連接系統的防火試驗安全標準
| Standard for Safety for Tests for Fire Resistance of Building Joint Systems
|
| ANSI/UL 263-2003
| 建筑結構和材料防火試驗的安全標準
| Standard for Safety for Fire Tests of Building Construction and Materials
|
| ANSI/UL 723-2005
| 建筑材料表面燃燒特性試驗的安全標準
| Standard for Safety for the Test for Surface Burning Characteristics of Building Materials
|
| ANSI/WDMA I.S.1A-2004
| 建筑木制結構齊邊拉門的工業規范
| Industry Specification for Architectural Wood Flush Doors
|
| ANSI/WDMA I.S.6A-2001
| 建筑木制門挺和有軌門的工業標準
| Industry Standard for Architectural Wood Stile and Rail Doors
|
| ASME A120.1-2001
| 建筑物維修用電動升降平臺的安全要求
| (Safety requirements for powered platforms for building maintenance)
|
| ASME B30.3a Addenda-1997
| 建筑用塔式起重機.附錄
| (Construction tower cranes; Addenda)
|
| ASME B30.3b Addenda-1998
| 建筑用塔式起重機.附錄
| (Construction tower cranes; Addenda)
|
| ASME B30.3c Addenda-1999
| 建筑用塔式起重機.附錄
| (Construction tower cranes; Addenda)
|
| ASME B31.9-1996
| 建筑物服務管道
| (Building services piping)
|
| ASME N45.2.3-1973
| 核電站建筑階段的房屋維護
| (Housekeeping during the construction phase of nuclear power plants)
|
| ASME N45.2.3a Addenda-1978
| 核電站建筑階段的房屋維護.附錄
| (Housekeeping during the construction phase of nuclear power plants; Addenda)
|
| ASME N45.2.5-1978
| 核電廠建筑階段結構混凝土,結構鋼,土質和地基的安裝,檢驗以及測試用附加質量保證要求
| (Supplementary quality assurance requirements for installation, inspection, and testing of structural concrete, structural steel, soils, and foundations during the construction phase of nuclear power p)
|
| ASME N45.2.8-1975
| 核電廠建筑階段機械設備和系統的安裝,檢驗和測試用附加質量保證要求
| (Supplementary quality assurance requirements for installation, inspection and testing of mechanical equipment and systems for the construction phase of nuclear power plants)
|
| ASME N45.2.8a Addenda-1981
| 核電廠建筑階段機械設備和系統的安裝,檢驗和測試用附加質量保證要求.附錄
| (Supplementary quality assurance requirements for installation, inspection and testing of mechanical equipment and systems for the construction phase of nuclear power plants; Addenda)
|
| ASME Y32.4-1977
| 建筑學和房屋建筑簡圖上管道裝置示意用圖形符號
| (Graphic symbols for plumbing fixtures for diagrams used in architecture and building construction)
|
| ASTM A 1043/A 1043M-2005
| 建筑物中使用的低拉伸彎曲力的結構鋼的標準規范
| Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
|
| ASTM A 595/A 595M-2006
| 建筑用錐形、高強度低合金或低碳鋼管的標準規范
| Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
|
| ASTM A 755/A 755M-2003
| 外露建筑產品用熱浸涂覆和用卷涂工藝預涂金屬的鋼薄板的標準規范
| Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
|
| ASTM B 101-2007
| 建筑結構用包鉛銅薄板材和帶材的標準規范
| Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
|
| ASTM B 370-2003
| 建筑結構用銅薄板和帶材標準規范
| Standard Specification for Copper Sheet and Strip for Building Construction
|
| ASTM B 882-2005
| 建筑物用已生有綠銹的銅的規范
| Specification for Pre-Patinated Copper for Architectural Applications
|
| ASTM C 1021-2001
| 建筑密封料試驗用實驗室的標準實施規程
| Standard Practice for Laboratories Engaged in the Testing of Building Sealants
|
| ASTM C 1046-1995
| 建筑物外殼構件的熱通量和溫度的現場測量標準實施規程
| Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
|
| ASTM C 1060-1990
| 框架建筑物外殼內腔的絕熱設施的溫度記錄檢驗
| Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
|
| ASTM C 1067-2000
| 建筑材料試驗方法的耐久或屏蔽程序實施的標準實施規程
| Standard Practice for Conducting A Ruggedness or Screening Program for Test Methods for Construction Materials
|
| ASTM C 1148a-1992
| 測量磚石建筑用灰漿干縮性標準試驗方法
| Standard Test Method for Measuring the Drying Shrinkage of Masonry Mortar
|
| ASTM C 1155-1995
| 通過現場數據測定建筑包覆物的熱阻的標準實施規程
| Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
|
| ASTM C 1158-2005
| 建筑結構中輻射屏蔽系統(RBS)的使用和安裝標準實施規程
| Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Building Construction
|
| ASTM C 1172-2003
| 建筑用夾層平板玻璃標準規范
| Standard Specification for Laminated Architectural Flat Glass
|
| ASTM C 1194-2003
| 建筑鑄石抗壓強度的標準試驗方法
| Standard Test Method for Compressive Strength of Architectural Cast Stone
|
| ASTM C 1195-2003
| 建筑用鑄石的吸收性標準試驗方法
| Standard Test Method for Absorption of Architectural Cast Stone
|
| ASTM C 1197-2004
| 用液壓千斤頂法現場測量磚石建筑可變形性的標準試驗方法
| Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
|
| ASTM C 11a-2007
| 石膏及相關建筑材料和系統相關標準術語
| Standard Terminology Relating to Gypsum and Related Building Materials and Systems
|
| ASTM C 1224-2003
| 建筑物用反射絕緣材料標準規范
| Standard Specification for Reflective Insulation for Building Applications
|
| ASTM C 1249a-2006
| 建筑密封玻璃用密封絕緣玻璃組件的二次密封標準規范
| Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
|
| ASTM C 1313-2005
| 房屋建筑用片狀輻射柵欄的標準規范
| Standard Specification for Sheet Radiant Barriers for Building Construction Applications
|
| ASTM C 1321-2004
| 建筑物內部輻射控制涂層系統(IRCCS)的安裝和使用的標準實施規程
| Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction
|
| ASTM C 1349-2004
| 建筑用聚碳酸酯鍍層平板玻璃的標準規范
| Standard Specification for Architectural Flat Glass Clad Polycarbonate
|
| ASTM C 1363-2005
| 用高溫實驗室法測定建筑材料和包裝組件熱性能的標準試驗方法
| Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
|
| ASTM C 1364-2007
| 建筑鑄石的標準規范
| Standard Specification for Architectural Cast Stone
|
| ASTM C 1375-1997
| 用于測試建筑物密封和膠粘劑的基質的標準指南
| Standard Guide for Substrates Used in Testing Building Seals and Sealants
|
| ASTM C 1386-2007
| 預制增壓加氣混凝土墻(PAAC)建筑部件的標準規范
| Standard Specification for Precast Autoclaved Aerated Concrete (PAAC) Wall Construction Units
|
| ASTM C 141-1997
| 建筑結構用水硬性熟石灰標準規范
| Standard Specification for Hydraulic Hydrated Lime for Structural Purposes
|
| ASTM C 1483-2004
| 建筑物外部防太陽輻射涂層的標準規范
| Standard Specification for Exterior Solar Radiation Control Coatings on Buildings
|
| ASTM C 1498a-2004
| 建筑材料的吸濕等熱性的標準試驗方法
| Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials
|
| ASTM C 1501-2004
| 用實驗室加速風化程序測定建筑物密封材料顏色穩定性的標準試驗方法
| Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
|
| ASTM C 1519-2004
| 用實驗室加速老化程序評價建筑物結構密封劑耐用性的標準規程
| Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
|
| ASTM C 1532-2006
| 已有建筑中人造圬工組裝件和圬工樣品的選擇、拆除和裝運標準實施規程
| Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction
|
| ASTM C 1589-2005
| 建筑密封件和密封劑的室外老化的標準規程
| Standard Practice for Outdoor Weathering of Construction Seals and Sealants
|
| ASTM C 1630-2006
| 制定松散填充建筑物熱絕緣材料覆蓋區域的標準指南
| Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations
|
| ASTM C 1642-2007
| 氣溶膠泡沫填縫劑和其它建筑填縫及絕緣材料漏氣率的測定用標準實施規程
| Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials
|
| ASTM C 212-2000
| 建筑用飾面瓷磚的標準規范
| Standard Specification for Structural Clay Facing Tile
|
| ASTM C 272-2001
| 結構夾層建筑用芯材吸水性的標準試驗方法
| Standard Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions
|
| ASTM C 274-2007
| 夾層結構建筑物標準術語
| Standard Terminology of Structural Sandwich Constructions
|
| ASTM C 367-2005
| 預制建筑用吸音磚和鑲入式天花板的強度性能的標準試驗方法
| Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels
|
| ASTM C 43-2006
| 建筑用粘土制品的標準術語
| Standard Terminology of Structural Clay Products
|
| ASTM C 5-2003
| 建筑用生石灰標準規范
| Standard Specification for Quicklime for Structural Purposes
|
| ASTM C 55-2006
| 混凝土建筑物磚的標準規范
| Standard Specification for Concrete Building Brick
|
| ASTM C 567a-2005
| 測定建筑輕質混凝土密度的標準試驗方法
| Standard Test Method for Determining Density of Structural Lightweight Concrete
|
| ASTM C 62-2005
| 建筑磚(粘土或頁巖制實心砌塊)的標準規范
| Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)
|
| ASTM C 634-2002
| 與建筑物和環境聲學相關的標準術語
| Standard Terminology Relating to Building and Environmental Acoustics
|
| ASTM C 653-1997
| 建筑物隔熱用低密度礦物纖維氈阻熱系數的測定的標準指南
| Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation
|
| ASTM C 656-2007
| 建筑用硅酸鈣隔熱板的標準規范
| Standard Specification for Structural Insulating Board, Calcium Silicate
|
| ASTM C 670-2003
| 制定建筑材料試驗方法用精密度和偏差說明的標準實施規程
| Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
|
| ASTM C 687-2005
| 測定松填建筑絕熱材料熱阻的標準實施規程
| Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
|
| ASTM C 717a-2007
| 建筑物密封件和密封劑的標準術語
| Standard Terminology of Building Seals and Sealants
|
| ASTM C 724-1991
| 建筑裝飾玻璃上陶瓷裝璜耐酸性的試驗方法
| Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass
|
| ASTM C 727-2001
| 建筑結構中反射隔熱的裝置及應用標準實施規程
| Standard Practice for Installation and Use of Reflective Insulation in Building Constructions
|
| ASTM C 802-1996
| 為確定建筑材料試驗方法精確度而實行實驗室間試驗程序的標準實施規程
| Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
|
| ASTM C 823/C 823M-2007
| 建筑物中硬化混凝土的檢驗和取樣用標準實施規程
| Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
|
| ASTM C 991-2003
| 金屬建筑物用撓性玻璃纖維絕緣材料標準規范
| Standard Specification for Flexible Glass Fiber Insulation for Metal Buildings
|
| ASTM D 1751-2004
| 混凝土鋪面和結構建筑用預制伸縮縫填料的標準規范(非擠壓和彈性瀝青型)
| Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)
|
| ASTM D 1752a-2004
| 混凝土鋪面和結構建筑用預制微孔橡膠軟木和可回收的PVC膨脹接縫填料的標準規范
| Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction
|
| ASTM D 2064-1991
| 建筑涂料抗污染性的標準試驗方法
| Standard Test Method for Print Resistance of Architectural Paints
|
| ASTM D 3381-2005
| 路面建筑用粘度分級瀝青水泥的標準規范
| Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
|
| ASTM D 3450-2000
| 內用建筑涂層可洗性的標準試驗方法
| Standard Test Method for Washability Properties of Interior Architectural Coatings
|
| ASTM D 3665-2007
| 建筑材料的隨機采樣用標準實施規程
| Standard Practice for Random Sampling of Construction Materials
|
| ASTM D 3930a-1993
| 造房用木質建筑材料用膠粘劑的標準規范
| Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes
|
| ASTM D 3957-2006
| 確立原木建筑物用結構構件應力分級的標準實施規范
| Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings
|
| ASTM D 4216-2006
| 硬質聚氯乙烯(PVC)和相關PVC和氯化聚氯乙烯(CPVC)建筑產品化合物的標準規范
| Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds
|
| ASTM D 4226-2005
| 硬質聚氯乙烯(PVC)建筑產品耐沖擊性的標準試驗方法
| Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
|
| ASTM D 4397-2002
| 建筑、工業和農業用聚乙烯薄板標準規范
| Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications
|
| ASTM D 448a-2003
| 道路和橋梁建筑用集料粒度的標準分類
| Standard Classification for Sizes of Aggregate for Road and Bridge Construction
|
| ASTM D 4803-1997
| 聚氯乙烯(PVC)建筑產品中預測生熱性的標準試驗方法
| Standard Test Method for Predicting Heat Buildup in PVC Building Products
|
| ASTM D 4851-2007
| 建筑用涂層織物和層疊織物的標準試驗方法
| Standard Test Methods for Coated and Laminated Fabrics for Architectural Use
|
| ASTM D 4946-1989
| 建筑涂料耐結塊的試驗方法
| Test Method for Blocking Resistance of Architectural Paints
|
| ASTM D 5107-2003
| 建筑用砂巖表面預清理的標準實施規范
| Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone
|
| ASTM D 5146-2003
| 溶媒型建筑涂料試驗的標準指南
| Standard Guide to Testing Solvent-Borne Architectural Coatings
|
| ASTM D 5150-1992
| 建筑涂料用滾子遮蓋率的試驗方法
| Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
|
| ASTM D 5324-2003
| 水溶性建筑涂料試驗的標準指南
| Standard Guide for Testing Water-Borne Architectural Coatings
|
| ASTM D 5791-1995
| 建筑物中室內空氣質量研究用概率取樣法的標準導則
| Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings
|
| ASTM D 6910-2004
| 粘土建筑泥漿的馬氏漏斗粘度的標準試驗方法
| Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries
|
| ASTM D 6950-2004
| 新建筑物平臺用熱力可焊無規聚丙烯改良瀝青防水薄膜材料應用的標準規程
| Standard Practice for Application of Heat Weldable Atactic Polypropylene (APP) Modified Bituminous Waterproofing Membranes Systems for New Building Decks
|
| ASTM E 1057-2006
| 建筑物和建筑系統投資的內部回報率和調整的內部回報率的測算的標準實施規程
| Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
|
| ASTM E 1074-2006
| 測算建筑物和建筑系統投資的凈收益和凈節存的標準實施規程
| Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems
|
| ASTM E 1121-2007
| 建筑物和建筑物系統的投資回報率測量用標準實施規程
| Standard Practice for Measuring Payback for Investments in Buildings and Building Systems
|
| ASTM E 1185-2007
| 建筑物和建筑系統中投資評價的經濟方法選擇用標準指南
| Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
|
| ASTM E 1186-2003
| 建筑物外層和空障系統漏氣現場檢測的標準實施規程
| Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
|
| ASTM E 119a-2007
| 建筑結構和材料燃燒試驗的標準試驗方法
| Standard Test Methods for Fire Tests of Building Construction and Materials
|
| ASTM E 1300-2007
| 建筑玻璃耐荷載性測定的標準實施規程
| Standard Practice for Determining Load Resistance of Glass in Buildings
|
| ASTM E 1334-1995
| 評定建筑物或相關建筑設施耐用性的標準實施規程
| Standard Practice for Rating the Serviceability of a Building or Building-Related Facility
|
| ASTM E 1369-2007
| 建筑物和建筑系統經濟評估中處理不確定性和風險的選擇技術標準指南
| Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
|
| ASTM E 1399-1997
| 建筑連接系統最小和最大連接寬度的測量和循環運動的標準試驗方法
| Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
|
| ASTM E 1464-1992
| 商用和研究用建筑物及設施的能源發展監督協議
| Standard Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities
|
| ASTM E 1465a-2007
| 新型低層住宅建筑物設計與建造用氡控制選項的標準實施規程
| Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings
|
| ASTM E 1480-1992
| 設備管理的標準術語(與建筑相關的)
| Standard Terminology of Facility Management (Building-Related)
|
| ASTM E 1481a-2000
| 建筑物用護欄裝置和圍欄的標準術語
| Standard Terminology of Railing Systems and Rails for Buildings
|
| ASTM E 1494-1992
| 建筑材料中噴涂或鏝刀涂抹的易碎石棉用密封的標準實施規程
| Standard Practice for Encapsulants for Spray- or Trowel-Applied Friable Asbestos-Containing Building Materials
|
| ASTM E 1557-2005
| 建筑構件及相應現場工作的標準分類.統一格式Ⅱ
| Standard Classification for Building Elements and Related Sitework-UNIFORMAT II
|
| ASTM E 1605-2004
| 與建筑物中鉛有關的標準術語
| Standard Terminology Relating to Lead in Buildings
|
| ASTM E 1612-1994
| 建筑物和停車場結構用預成形建筑壓縮密封件標準規范
| Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
|
| ASTM E 1664a-1995
| 辦公設備對于布局和建筑物因素的適用性標準分類
| Standard Classification for Serviceability of an Office Facility for Layout and Building Factors
|
| ASTM E 1677-2005
| 低拱屋架建筑物墻壁用空氣阻擋(AR)材料或系統標準規范
| Standard Specification for an Air Retarder (AR) Material or System for Low-Rise Framed Building Walls
|
| ASTM E 1679-1995
| 建筑物或建筑物有關設備適用性裝配要求的標準實施規程
| Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility
|
| ASTM E 1699-2000
| 建筑物和建筑系統估價分析標準操作規程
| Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems
|
| ASTM E 1700-1995
| 結構和建筑物包封用辦公設備的適用性標準分類
| Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope
|
| ASTM E 1765-2007
| 利用分析體系過程(AHP)進行建筑物和建筑系統相關投資的多方?jīng)Q策分析的標準實施規范
| Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems
|
| ASTM E 1783-1996
| 建筑物和停車場建筑的預制結構密封帶的技術規范
| Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
|
| ASTM E 1795-2004
| 建筑物含鉛漆用非增強液體涂層封裝產品標準規范
| Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
|
| ASTM E 1796-2003
| 建筑物中含鉛漆的液體涂層封裝產品的選擇和使用的標準指南
| Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
|
| ASTM E 1797-2004
| 建筑物中含鉛漆用增強的液體涂層封裝產品用標準規范
| Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
|
| ASTM E 1825-2006
| 建筑外墻材料、產品和系統評估的標準指南
| Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems
|
| ASTM E 1827-1996
| 用風孔門測定建筑物空氣密封性的標準試驗方法
| Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
|
| ASTM E 1836-2001
| 設備管理用建筑物樓板面積測量的標準分類
| Standard Classification for Building Floor Area Measurements for Facility Management
|
| ASTM E 1864-2002
| 周圍建筑物和相關結構中涂料、塵土、空中懸浮微粒和土壤中鉛的危害評估和評估質量系統的標準實施規范
| Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and around Buildings and Related Structures
|
| ASTM E 1908-2003
| 可浸出鉛的毒性浸出過程試驗用的來自于建筑改建或除鉛工程中碎料廢物樣品選擇的標準指南
| Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
|
| ASTM E 1946-2007
| 估算建筑物和建筑系統成本風險的標準實施規范
| Standard Practice for Measuring Cost Risk of Buildings and Building Systems
|
| ASTM E 1971-2005
| 商業和機構建筑物清潔管理的標準指南
| Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings
|
| ASTM E 1991-2005
| 建筑材料/產品環境生命周期評定(LCA)的標準指南
| Standard Guide for Environmental Life Cycle Assessment (LCA) of Building Materials/Products
|
| ASTM E 2026-2007
| 建筑物的地震危險評估用標準指南
| Standard Guide for Seismic Risk Assessment of Buildings
|
| ASTM E 2083-2005
| 建筑施工現場要求和辦公通常收益的標準分類
| Standard Classification for Building Construction Field Requirements, and Office Overhead Profit
|
| ASTM E 2114a-2006
| 建筑物性能相關穩定性的標準術語
| Standard Terminology for Sustainability Relative to the Performance of Buildings
|
| ASTM E 2115-2006
| 評估兒童住宅建筑及其他兒童設施鉛危害性的標準指南
| Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
|
| ASTM E 2121-2003
| 在已有的低層住宅建筑中安裝氡減緩系統的標準實施規程
| Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
|
| ASTM E 2126-2007
| 建筑物用墻抗剪切的周期(反向)負荷試驗用標準試驗方法
| Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Walls for Buildings
|
| ASTM E 2128a-2001
| 評定建筑物墻壁水滲漏的標準指南
| Standard Guide for Evaluating Water Leakage of Building Walls
|
| ASTM E 2129-2005
| 建筑產品持續性評定用數據采集的標準實施規程
| Standard Practice for Data Collection for Sustainability Assessment of Building Products
|
| ASTM E 2166-2007
| 組織和管理建筑數據用標準實施規程
| Standard Practice for Organizing and Managing Building Data
|
| ASTM E 2168-2006
| 建筑結構估算中容許偏差、偶然事故和儲備量的標準分類
| Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating
|
| ASTM E 2178-2003
| 建筑材料透氣性的標準試驗方法
| Standard Test Method for Air Permeance of Building Materials
|
| ASTM E 2204-2005
| 建筑相關項目經濟影響概述的標準指南
| Standard Guide for Summarizing the Economic Impacts of Building-Related Projects
|
| ASTM E 2255-2004
| 進行建筑物中鉛危害目視評定的標準實施規程
| Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings
|
| ASTM E 2260-2003
| 磚石建筑古跡重嵌灰縫(磚砌體嵌凸縫)的標準指南
| Standard Guide for Repointing (Tuckpointing) Historic Masonry
|
| ASTM E 2266-2004
| 防水浸入的低層框架建筑物墻壁系統的設計和建造的標準指南
| Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion
|
| ASTM E 2270-2005
| 不安全條件下建筑物正面周期性檢驗的標準規程
| Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions
|
| ASTM E 2277-2003
| 煤灰建筑填充件的設計和制造的標準指南
| Standard Guide for Design and Construction of Coal Ash Structural Fills
|
| ASTM E 2308-2005
| 建筑物用有限石棉隔板的標準指南
| Standard Guide for Limited Asbestos Screens of Buildings
|
| ASTM E 2322-2003
| 進行地板和屋面建筑用配電板的橫向和集中載荷試驗的標準試驗方法
| Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof Construction
|
| ASTM E 2356-2004
| 綜合建筑物石棉調查的標準規程
| Standard Practice for Comprehensive Building Asbestos Surveys
|
| ASTM E 2392-2005
| 土墻建筑系統的設計標準指南
| Standard Guide for Design of Earthen Wall Building Systems
|
| ASTM E 241-2004
| 建筑物抗水損壞極限的標準指南
| Standard Guide for Limiting Water-Induced Damage to Buildings
|
| ASTM E 2418-2006
| 商用建筑中易于觀測的真菌及真菌滋生條件的標準指南：基線檢測程序
| Standard Guide for Readily Observable Mold and Conditions Conducive to Mold in Commercial Buildings: Baseline Survey Process
|
| ASTM E 2431-2006
| 單個上釉建筑平面玻璃對熱負載耐力測定標準實施規程
| Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings
|
| ASTM E 2432-2005
| 與建筑物有關的可持續性的一般原則的標準指南
| Standard Guide for General Principles of Sustainability Relative to Buildings
|
| ASTM E 2484-2006
| 超高層建筑物外部疏散緩降器的標準規范
| Standard Specification for High-Rise Building External Evacuation Controlled Descent Devices
|
| ASTM E 2513-2007
| 多層建筑物外部撤離平臺營救系統用標準規范
| Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems
|
| ASTM E 336-2007
| 建筑物房間之間氣載噪聲衰減率的標準試驗方法
| Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
|
| ASTM E 455-2004
| 建筑物用構架地板或屋面薄膜結構的靜負荷試驗的標準方法
| Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
|
| ASTM E 514-2006
| 磚石建筑的水滲入和滲漏的標準試驗方法
| Standard Test Method for Water Penetration and Leakage Through Masonry
|
| ASTM E 529-2004
| 進行房屋建筑用桁條和大梁彎曲試驗的標準指南
| Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
|
| ASTM E 564-2006
| 建筑物框架墻抗剪切的靜態負荷試驗的標準實施規程
| Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
|
| ASTM E 569-2007
| 受控激勵時建筑物聲發射監測的標準實施規程
| Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation
|
| ASTM E 577-1985
| 直線建筑構件及系統的尺寸協調規格
| Standard Guide for Dimensional Coordination of Rectilinear Building Parts and Systems
|
| ASTM E 621-1994
| 建筑物設計和施工中米制(SI)單位的使用(E-6委員會對E308的增補)
| Standard Practice for the Use of Metric (SI) Units in Building Design and Construction (Committee E-6 Supplement to E380)
|
| ASTM E 631-2006
| 建筑物結構的標準術語
| Standard Terminology of Building Constructions
|
| ASTM E 651/E 651M-2001
| 對已建成的建筑物進行系統分析和合格保證的機構的能力評價的標準實施規程
| Standard Practice for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building
|
| ASTM E 695-2003
| 墻、樓板和屋頂建筑的相對抗沖擊負荷測量的標準方法
| Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
|
| ASTM E 699-2003
| 對從事檢驗、質量保證和評定建筑物構件的機構進行評價的標準實施規范
| Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components
|
| ASTM E 713-1988
| 米制建筑圖紙標度的選擇
| Standard Guide for Selection of Scales for Metric Building Drawings
|
| ASTM E 72-2005
| 建筑工程用板條的傳導強度試驗的標準試驗方法
| Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
|
| ASTM E 833-2006
| 建筑經濟學的標準術語
| Standard Terminology of Building Economics
|
| ASTM E 894-1988
| 建筑物用永久性金屬圍欄系統及圍欄的錨定試驗
| Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
|
| ASTM E 90-2004
| 實驗室測量建筑物隔墻和構件的空氣聲音傳輸損失的標準試驗方法
| Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
|
| ASTM E 917-2005
| 建筑物和建筑物系統使用期成本測算的標準實施規程
| Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems
|
| ASTM E 935-2000
| 建筑物用永久金屬圍欄系統及圍欄特性的標準試驗方法
| Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings
|
| ASTM E 964-2006
| 建筑物和建筑物系統的效益與成本和節約與投資比率測算的標準實施規程
| Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems
|
| ASTM E 966-2004
| 建筑物表面和表面構件氣載聲音隔離的現場測量標準指南
| Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements
|
| ASTM E 985-2000
| 建筑物用永久性金屬圍欄系統和圍欄的標準規范
| Standard Specification for Permanent Metal Railing Systems and Rails for Buildings
|
| ASTM F 1193-2006
| 娛樂騎乘和設備建筑和制造質量的實施規程
| Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
|
| ASTM F 1584-1995
| 事故查找過程中建筑物標志標準實用規程
| Standard Practice for Marking Buildings During Disaster Search Operations
|
| ASTM F 940-1999
| 海上建筑物及造船用保護性涂料的質量控制驗收檢驗程序的標準操作規程
| Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
|
| IEEE 1226-1998
| 測試的寬底環境試行標準.總論和建筑學
| (Trial-use standard for A Broad-Based Environment for Test (ABBET) - Overview and architecture)
|
| IEEE 1516-2000
| 模型和模擬高級建筑學.框架和規則
| (Modeling and Simulation (M&S) High Level Architecture (HLA) - Framework and rules)
|
| IEEE 1516.1-2000
| 模型和模擬高級建筑學.聯合接口規范
| (Modeling and simulation (M&S) High Level Architecture (HLA) - Federate interface specification)
|
| IEEE 1516.2-2000
| 模型和模擬高級建筑學.目標模板規范
| (Modeling and simulation (M&S) High Level Architecture (HLA) - Object Model Template (OMT) specification)
|
| IEEE 241-1990
| 商業建筑物電力系統推薦規程
| (Recommended practice for electric power systems in commercial buildings)
|
| IEEE Y 32.9-1972
| 在建筑和工程結構中電氣配線和規劃圖表用圖形符號
| (Graphic symbols for electrical wiring and layout diagrams used in architecture and building construction)
|
| UL 103-2001
| 住宅型及建筑物取曖裝置用工廠建煙囪
| (Factory-built chimneys for residential type and building heating appliances )
|
| UL 2079-1998
| 建筑物連接系統的耐火性試驗
| (Tests for fire resistance of building joint systems )
|
| UL 263-2003
| 建筑結構和材料的燃燒試驗
| (Fire tests of building construction and materials)
|
| UL 723-2003
| 建筑材料表面燃燒特性的試驗
| (Test for surface burning characteristics of building materials )
|
| 編號 | 中文名稱 | 英文名稱 |
|---|