| 編號 | 中文名稱 | 英文名稱 |
|---|
| IEC 60364-4-42-2001
| 建筑物的電氣設施 第4-42部分：安全防護 熱效應防護
| Electrical installations of buildings - Part 42: Protection for safety; Protection against thermal effects
|
| IEC 60364-4-43 Corrigendum 1-2002
| 建筑物的電氣設施.第4-43部分：安全防護.過電流保護
| Electrical installations of buildings - Part 4-43: Protection for safety; Protection against overcurrent
|
| IEC 60364-4-43-2001
| 建筑物的電氣設施 第4-43部分：安全防護 過電流保護
| Electrical installations of buildings - Part 4-43: Protection for safety; Protection against overcurrent
|
| IEC 60364-4-443-1999
| 建筑物的電氣設施 第4部分:安全防護 第44章:過電壓防護 第443節:來源于大氣或開關操作引起的過電壓的保護
| Electrical installations of buildings - Part 4: Protection for safety - Chapter 44: Protection against overvoltages - Section 443: Protection against overvoltages of atmospheric origin or due to switching
|
| IEC 60364-4-473-1999
| 建筑物的電氣設施 第4部分:安全防護 第47章:安全防護措施的應用 第473節:過電流保護措施
| Electrical installations of buildings - Part 4: Protection for safety - Chapter 47: Application of protective measures for safety - Section 473: Measures of protection against overcurrent
|
| IEC 60364-5-51-2005
| 建筑物的電氣設施.第5-51部分:電氣設備的選擇和安裝.共同規則
| Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules
|
| IEC 60364-5-52-2001
| 建筑物的電氣設施 第5-52部分：電氣設備的選擇和安裝 布線系統
| Electrical installations of buildings - Part 5-52: Selection and erection of electrical equipment; Wiring systems
|
| IEC 60364-5-53 AMD 1-2002
| 建筑物的電氣設施.第5-53部分:電氣設備的選擇和安裝.絕緣、轉換 和控制.修改件1
| Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment; Isolation, switching and control; Amendment 1
|
| IEC 60364-5-53 Edition 3.1-2002
| 建筑物的電氣裝置.第5-53部分:電氣設備的選擇和安裝.絕緣、開關和控制
| Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment; Isolation, switching and control
|
| IEC 60364-5-53-2001
| 建筑物的電氣設施 第5-53部分：隔離、開合和控制
| Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment; Isolation, switching and control
|
| IEC 60364-5-54-2002
| 建筑物的電氣設施.第5-54部分:電氣設備的選擇和安裝.接地措施、保護導體和保護跨接線
| Electrical installations of buildings - Part 5-54: Selection and erection of electrical equipment; Earthing arrangements, protective conductors and protective bonding conductors
|
| IEC 60364-5-548-1999
| 建筑物的電氣設施 第5部分:電氣設備的選擇和安裝 第548節:信息技術設施的接地措施和等電位連接
| Electrical installations of buildings - Part 5: Selection and erection of electrical equipment - Section 548: Earthing arrangements and equipotential bonding for information technology installations
|
| IEC 60364-5-55 AMD 1-2001
| 建筑物的電氣設施 第5部分:電氣設備的選擇和安裝 第55章:其他設備 第551節:低壓發電機組 修改1
| Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment; Other equipment; Amendment 1
|
| IEC 60364-5-55 Edition 1.1-2002
| 建筑物的電氣裝置.第5-55部分:電氣設備的選擇和安裝.其它設備
| Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment; Other equipment
|
| IEC 60364-5-55-2001
| 建筑物的電氣設施 第5-55部分：電氣設備的選擇和安裝 其他設備
| Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment; Other equipment
|
| IEC 60364-5-56-1999
| 建筑物的電氣設施 第5部分:電氣設備的選擇和安裝 第56章:安全服務
| Electrical installations of buildings - Part 5: Selection and erection of electrical equipment - Chapter 56: Safety services
|
| IEC 60364-7-702-1997
| 建筑物的電氣設施 第7部分:特殊設施或場所的要求 第702節:游泳池和其他水池
| Electrical installations of buildings - Part 7: Requirements for special installations or locations - Section 702: Swimming pools and other basins
|
| IEC 60364-7-703-2004
| 建筑物的電氣設施.第7-703部分:特殊設施或場所的要求.裝有桑拿浴加熱器的房間和浴室
| Electrical installations of buildings - Part 7-703: Requirements for special installations or locations - Rooms and cabins containing sauna heaters
|
| IEC 60364-7-704-2005
| 低壓電氣設施.第7-704部分:特殊設施或場所的要求.建筑和拆除工地的設施
| Low-voltage electrical installations - Part 7-704: Requirements for special installations or locations - Construction and demolition site installations
|
| IEC 60364-7-710-2002
| 建筑物的電氣設施.第7-710部分:特殊設施或場所的要求.醫療場所
| Electrical installations of buildings - Part 7-710: Requirements for special installations or locations; Medical locations
|
| IEC 60364-7-711-1998
| 建筑物的電氣設施 第7-711部分:特殊設施或場所的要求 展覽會、陳列室和展臺設施
| Electrical installations of buildings - Part 7-711: Requirements for special installations or locations - Exhibitions, shows and stands
|
| IEC 60364-7-712-2002
| 建筑物的電氣裝置.第7-712部分:特殊安裝和定位的要求.太陽光電能源供應系統
| Electrical installations of buildings - Part 7-712: Requirements for special installations or locations; Solar photovoltaic (PV) power supply systems
|
| IEC 60364-7-713-1996
| 建筑物的電氣設施 第7部分:特殊設施或場所的要求 第713節:家具
| Electrical installations of buildings - Part 7: Requirements for special installations and locations - Section 713: Furniture
|
| IEC 60364-7-714-1996
| 建筑物的電氣設施 第7部分:特殊設施或場所的要求 第714章:外部照明設施
| Electrical installations of buildings - Part 7: Requirements for special installations or locations - Section 714: External lighting installations
|
| IEC 60364-7-715-1999
| 建筑物的電氣設施 第7-715部分:特殊設施或場所的要求 超低壓照明設施
| Electrical installations of buildings - Part 7-715: Requirements for special installations or locations - Extra-low-voltage ligthing installations
|
| IEC 60364-7-717-2001
| 建筑物的電氣設施 第7-717部分：特殊設施或場所的要求 可動或可移裝置
| Electrical installations of buildings - Part 7-717: Requirements for special installations or locations; Mobile or transportable units
|
| IEC 60364-7-740-2000
| 建筑物的電氣設施 第7-740部分:特殊設施或場所的要求
| Electrical installations of buildings - Part 7-740: Requirements for special installations or locations; Temporary electrical installations for structures, amusement devices and booths at fairgrounds, amusement parks and circuses
|
| IEC 60449 AMD 1-1979
| 建筑物電氣設施的電壓區段 修改1
| Voltage bands for electrical installatons of buildings
|
| IEC 60449-1973
| 建筑物電氣設施的電壓區段
| Voltage bands for electrical installiatons of buildings
|
| IEC 60652-2002
| 架空線建筑物的負荷試驗
| Loading tests on overhead line structures
|
| IEC 60839-2-3-1987
| 報警系統 第2部分:入侵者報警系統的要求 第3節:建筑物內紅外線束遮斷探測器的要求
| Alarm systems. Part 2: Requirements for intruder alarm systems. Section Three - Requirements for infrared-beam interruption dectors in buildings
|
| IEC 60839-2-4-1990
| 報警系統 第2部分:入侵者報警系統的要求 第4節:建筑物內使用的超聲波多普勒探測器
| Alarm systems; part 2: requirements for intruder alarm systems; section 4: ultrasonic doppler detectors for use in buildings
|
| IEC 60839-2-5-1990
| 報警系統 第2部分:入侵者報警系統的要求 第5節:建筑物內使用的微波多普勒探測器
| Alarm systems; part 2: requirements for intruder alarm systems; section 5: microwave doppler detectors for use in buildings
|
| IEC 60839-2-6-1990
| 報警系統 第2部分:入侵者報警系統的要求 第6節:建筑物使用的無源紅外探測器
| Alarm systems; part 2: requirements for intruder alarm systems; section six: passive infra-red detectors for use in buildings
|
| IEC 60839-2-7-1994
| 報警系統 第2部分:入侵者報警系統的要求 第7節:建筑物使用的玻璃斷口狀通過探測器
| Alarm systems - Part 2: Requirements for intruder alarm systems; section 7: Passive glass-break detectors for use in buildings
|
| IEC 61558-2-23-2000
| 電力變壓器、電源裝置及類似設備的安全 第2-23部分:建筑工地用變壓器的特殊要求
| Safety of power transformers, power supply units and similar devices - Part 2-23: Particular requirements for transformers for construction sites
|
| IEC 62305-3-2006
| 避雷系統.第3部分:對建筑物的物理損傷和壽命危害
| Protection against lightning - Part 3: Physical damage to structures and life hazard
|
| IEC 62305-4-2006
| 防止雷電電磁沖擊.第4部分:建筑物中電氣和電子系統
| Protection against lightning - Part 4: Electrical and electronic systems within structures
|
| IEC/PAS 61499-1 Edition 1.0-2000
| 工業流程測量和控制系統的功能區.第1部分:建筑
| Function blocks for industrial-process measurement and control systems - Part 1: Architecture
|
| IEC/TR 60079-13-1982
| 爆炸性氣體環境用電氣設備 第13部分:正壓保護的房間或建筑物的結構和使用
| Electrical apparatus for explosive gas atmospheres. Part 13 : Construction and use of rooms or buildings protected by pressurization
|
| IEC/TR 62222-2006
| 建筑物內安裝的通信電纜的防火性能
| Fire performance of communication cables installed in buildings
|
| IEC/TR3 61200-704-1996
| 電氣設施導則 第704部分:建筑和拆除工地設施
| Electrical installation guide - Part 704: Construction and demolition site installations
|
| ISO 1006-1983
| 房屋建筑 模數協調 基本模數
| Building construction; Modular coordination; Basic module
|
| ISO 10209-4-1999
| 技術產品文件 詞匯 第4部分:與建筑工程文件有關的術語 兩種語言版
| Technical product documentation - Vocabulary - Part 4: Terms relating to construction documentation
|
| ISO 10211-1 Technical Corrigendum 1-2002
| 建筑結構熱橋.熱流和表面溫度.第1部分:一般計算方法.技術勘誤1
| Thermal bridges in building construction - Heat flows and surface temperatures - Part 1: General calculation methods; Technical Corrigendum 1
|
| ISO 10211-1-1995
| 建筑結構熱橋 熱流和表面溫度 第1部分:一般計算方法
| Thermal bridges in building construction - Heat flow and surface temperatures - Part 1: General calculation methods
|
| ISO 10211-2-2001
| 建筑結構熱橋 熱流和表面溫度 第2部分：線性熱橋
| Thermal bridges in building construction - Calculation of heat flows and surface temperatures - Part 2: Linear thermal bridges
|
| ISO 10291-1994
| 建筑玻璃 多層玻璃窗穩態u-值(傳熱系數)的測定 防護熱板法
| Glass in building - Determination of steady-state U values (thermal transmittance) of multiple glazing - Guarded hot plate method
|
| ISO 10292-1994
| 建筑玻璃 多層玻璃窗穩態u-值(傳熱系數)的計算
| Glass in building - Calculation of steady-state U values (thermal transmittance) of multiple glazing
|
| ISO 10293-1997
| 建筑玻璃 多層玻璃窗穩態U-值(傳熱系數)的測定 熱流計法
| Glass in building - Determination of steady-state U values (thermal transmittance) of multiple glazing - Heat flow meter method
|
| ISO 10295-1-2007
| 建筑單元和構件的燃燒試驗.服務設施的燃燒測試.第1部分:滲透密封
| Fire tests for building elements and components - Fire testing of service installations - Part 1: Penetration seals
|
| ISO 10303-225-1999
| 工業自動化系統和集成 產品數據表示和交換 第225部分:應用協議:用外在形狀表示的建筑元素
| Industrial automation systems and integration - Product data representation and exchange - Part 225: Application protocol: Building elements using explicit shape representation
|
| ISO 1040-1983
| 房屋建筑 模數協調 水平協調尺寸的擴大模數
| Building construction; Modular coordination; Multimodules for horizontal coordinating dimensions
|
| ISO 10456-1999
| 建筑材料和制品 確定熱性能申報值和設計值的程序
| Building materials and products - Procedures for determining declared and design thermal values
|
| ISO 10563-2005
| 房屋建筑.密封膠.質量和體積變化的測定
| Building construction - Sealants - Determination of change in mass and volume
|
| ISO 10590-2005
| 房屋建筑.密封膠.浸水后保持延伸的密封膠拉伸性能的測定
| Building construction - Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water
|
| ISO 10591-2005
| 房屋建筑.密封膠.浸水后密封膠粘結/粘合性能的測定
| Building construction - Sealants - Determination of adhesion/cohesion properties of sealants after immersion in water
|
| ISO 11091-1994
| 建筑工程制圖 園林制圖實用規程
| Construction drawings - Landscape drawing practice
|
| ISO 11375-1998
| 建筑施工機械和設備 術語和定義
| Building construction machinery and equipment - Terms and definitions
|
| ISO 11431-2002
| 房屋建筑.連接件.受熱、水和透過玻璃的人造光照射后密封膠的粘合性的測定
| Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass
|
| ISO 11432-2005
| 房屋建筑.密封膠.耐壓性的測定
| Building construction - Sealants - Determination of resistance to compression
|
| ISO 11600-2002
| 房屋建筑.連接件.密封膠的分類和要求
| Building construction - Jointing products - Classification and requirements for sealants
|
| ISO 11654-1997
| 聲學 建筑用吸聲裝置 吸聲定標
| Acoustics - Sound absorbers for use in buildings - Rating of sound absorption
|
| ISO 1182-2002
| 建筑材料的對火反應試驗.不可燃性試驗
| Reaction to fire tests for building products - Non-combustibility test
|
| ISO 11886 Technical Corrigendum 1-2006
| 房屋建筑機械和設備.打樁驅動和提取設備.術語和商業規范.技術勘誤1
| Building construction machinery and equipment - Pile driving and extracting equipment - Terminology and commercial specifications; Technical Corrigendum 1
|
| ISO 11886-2002
| 房屋建筑機械設備.打樁驅動和提取設備.術語和商業規范
| Building construction machinery and equipment - Pile driving and extracting equipment - Terminology and commercial specification
|
| ISO 11925-2-2002
| 對火反應試驗.直接受火的建筑制品的可燃性.第2部分:單一火源試驗
| Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Part 2: Single-flame source test
|
| ISO 11925-3 Technical Corrigendum 1-1998
| 對火反應試驗 直接受火的建筑制品的可燃性 第3部分:多火源試驗 技術勘誤1
| Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Part 3: Multi-source test; Technical Corrigendum 1
|
| ISO 11925-3-1997
| 對火反應試驗 直接受火的建筑制品的可燃性 第3部分:多火源試驗
| Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Part 3: Multi-source test
|
| ISO 12006-2-2001
| 房屋建筑 施工信息的編制 第2部分：信息分類框架
| Building construction - Organization of information about construction works - Part 2: Framework for classification of information
|
| ISO 12006-3-2007
| 建筑構造.施工工程的信息組織.第3部分:面向?qū)ο蟮男畔⒖蚣? | Building construction - Organization of information about construction works - Part 3: Framework for object-oriented information
|
| ISO 12241-1998
| 建筑設備和工業裝置絕熱 計算規則
| Thermal insulation for building equipment and industrial installations - Calculation rules
|
| ISO 12491-1997
| 建筑材料和部件質量控制的統計方法
| Statistical methods for quality control of building materials and components
|
| ISO 12543-1-1998
| 建筑玻璃 夾層玻璃和夾層安全玻璃 第1部分:定義和零部件的描述
| Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts
|
| ISO 12543-2-2004
| 建筑玻璃.夾層玻璃和夾層安全玻璃.第2部分:夾層安全玻璃
| Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass
|
| ISO 12543-3-1998
| 建筑玻璃 夾層玻璃和夾層安全玻璃 第3部分:夾層玻璃
| Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass
|
| ISO 12543-4-1998
| 建筑玻璃 夾層玻璃和夾層安全玻璃 第4部分:耐久性檢驗方法
| Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability
|
| ISO 12543-5-1998
| 建筑玻璃 夾層玻璃和夾層安全玻璃 第5部分:尺寸和板邊精加工
| Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing
|
| ISO 12543-6-1998
| 建筑玻璃 夾層玻璃和夾層安全玻璃 第6部分:外觀
| Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance
|
| ISO 12569-2000
| 建筑物熱性能 建筑物的換氣率測定 示蹤氣體稀釋法
| Thermal performance of buildings - Determination of air change in buildings - Tracer gas dilution method
|
| ISO 12570-2000
| 建筑材料及制品的濕熱性能 含濕率的測定 烘干法
| Hygrothermal performance of building materials und products - Determination of moisture content by drying at elevated temperature
|
| ISO 12571-2000
| 建筑材料及制品的濕熱性能 吸濕性質的測定
| Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties
|
| ISO 12572-2001
| 建筑材料和制品濕熱性能 水蒸氣擴散特性的測定
| Hygrothermal performance of building materials and products - Determination of water vapour transmission properties
|
| ISO 12576-1-2001
| 絕熱 建筑物用絕熱材料及制品 符合性控制體系 第1部分：工廠制造的產品
| Thermal insulation - Insulating materials and products for buildings; Conformity control systems - Part 1: Factory-made products
|
| ISO 128-23-1999
| 技術制圖 畫法的一般原則 第23部分:建筑工程制圖線
| Technical drawings - General principles of presentation - Part 23: Lines on construction drawings
|
| ISO 13370-1998
| 建筑物熱性能 地面?zhèn)鳠?計算方法
| Thermal performance of buildings - Heat transfer via the ground - Calculation methods
|
| ISO 13550-2002
| 流速測定.利用建筑結構進行明渠流量測量.垂直下溢閘
| Hydrometric determinations - Flow measurements in open channels using structures - Use of vertical underflow gates
|
| ISO 13567-2-1998
| 技術產品文件 計算機輔助設計(CAD)圖層的編排和命名 第2部分:用于建筑工程文件的概念、格式和代碼
| Technical product documentation - Organization and naming of layers for CAD - Part 2: Concepts, format and codes used in construction documentation
|
| ISO 13638-1996
| 房屋建筑 密封膠 耐長期浸泡水性能的測定
| Building construction - Sealants - Determination of resistance to prolonged exposure to water
|
| ISO 13640-1999
| 房屋建筑 連接件 試驗襯墊規范
| Building construction - Jointing products - Specifications for test substrates
|
| ISO 13784-1-2002
| 夾層板建筑系統對火反應的試驗.第1部分:小室試驗方法
| Reaction-to-fire tests for sandwich panel building systems - Part 1: Test method for small rooms
|
| ISO 13784-2-2002
| 夾層板建筑系統對火反應的試驗.第2部分:大空間的試驗方法
| Reaction-to-fire tests for sandwich panel building systems - Part 2: Test method for large rooms
|
| ISO 13786-1999
| 建筑部件熱性能 動態熱特征 計算方法
| Thermal performance of building components - Dynamic thermal characteristics - Calculation methods
|
| ISO 13787-2003
| 建筑設備和裝置用隔熱產品.標稱導熱性的測定
| Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity
|
| ISO 13788-2001
| 建筑部件和構件的濕熱性能 能避免臨界表面濕度和縫隙冷凝作用的內表面溫度 計算方法
| Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods
|
| ISO 13789-1999
| 建筑物熱性能 熱損失系數 計算方法
| Thermal performance of buildings - Transmission heat loss coefficient - Calculation method
|
| ISO 13790-2004
| 建筑物的熱性能.空間加熱用能量計算
| Thermal performance of buildings - Calculation of energy use for space heating
|
| ISO 13791-2004
| 建筑物的熱性能.夏季無機械通風冷卻時房間內部溫度的計算.一般標準和確認程序
| Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures
|
| ISO 13792-2005
| 建筑物的熱性能.非機器制冷條件下夏季房間內溫度的計算.簡化法
| Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - Simplified methods
|
| ISO 13793-2001
| 建筑物的熱性能 為避免冰凍隆漲的地基熱設計
| Thermal performance of buildings - Thermal design of foundations to avoid frost heave
|
| ISO 140-1 AMD 1-2004
| 聲學.建筑物和建筑構件的隔聲測量.第1部分:能抑制側向傳聲的實驗室試驗裝置的要求.修改件1: 輕型雙葉隔板用
| Acoustics - Measurement of sound insulation in buildings and of building elements - Part 1: Requirements for laboratory test facilities with suppressed flanking transmission; Amendment 1: Specific requirements on the frame of the test opening for lightweight twin leaf partitions
|
| ISO 140-1-1997
| 聲學 建筑物和建筑構件的隔聲測量 第1部分:能抑制側向傳聲的實驗室試驗裝置的要求
| Acoustics - Measurement of sound insulation in buildings and of building elements - Part 1: Requirements for laboratory test facilities with suppressed flanking transmission
|
| ISO 140-10-1991
| 聲學 建筑和建筑構件的隔聲測量 第10部分:小建筑構件空氣聲隔聲的實驗室測量
| Acoustics - Measurement of sound insulation in buildings and of building elements-part 10: laboratory measurements of airborne sound insulation of small building elements
|
| ISO 140-11-2005
| 聲學.建筑物和建筑構件的隔聲測量.第11部分:輕型標準樓板覆蓋物傳遞沖擊聲音減低的實驗室測量
| Acoustics - Measurement of sound insulation in buildings and of building elements - Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors
|
| ISO 140-14 Technical Corrigendum 1-2007
| 聲學.建筑物和建筑構件的隔聲測量.第14部分:試驗場中特殊情況指南.技術勘誤1
| Acoustics - Measurement of sound insulation in buildings and of building elements - Part 14: Guidelines for special situations in the field; Technical Corrigendum 1
|
| ISO 140-14-2004
| 聲學.建筑物和建筑構件的隔聲測量.第14部分:試驗場中特殊情況指南
| Acoustics - Measurement of sound insulation in buildings and of building elements - Part 14: Guidelines for special situations in the field
|
| ISO 140-16-2006
| 聲學.建筑物和建筑構件的隔聲測量.第16部分:通過附加襯里實驗室測量降低聲指數值
| Acoustics - Measurement of sound insulation in buildings and of building elements - Part 16: Laboratory measurement of the sound reduction index improvement by additional lining
|
| ISO 140-18-2006
| 聲學.建筑物內的和建筑部件的隔聲測量.第18部分:建筑構件上降雨噪音的實驗室測量
| Acoustics - Measurement of sound insulation in buildings and of building elements - Part 18: Laboratory measurement of sound generated by rainfall on building elements
|
| ISO 140-2 Technical Corrigendum 1-1993
| 聲學 建筑物和建筑構件的隔聲測量 第2部分:精確數據的測定、檢驗和應用 技術勘誤1
| Acoustics; measurement of sound insulation in buildings and of building elements; part 2: determination, verification and application of precision data; technical corrigendum 1
|
| ISO 140-2-1991
| 聲學 建筑物和建筑構件的隔聲測量 第2部分:精確數據的確定、檢驗和應用
| Acoustics; measurement of sound insulation in buildings and of building elements; part 2: determination, verification and application of precision data
|
| ISO 140-3 AMD 1-2004
| 聲學.建筑物和建筑構件的隔聲測量.第3部分:建筑構件空氣聲隔聲的實驗室測量.修改件1:輕型雙葉隔板的安裝指
| Acoustics - Measurement of sound insulation in buildings and of building elements - Part 3: Laboratory measurements of airborne sound insulation of building elements; Amendment 1: Installation guidelines for lightweight twin leaf partitions
|
| ISO 140-3-1995
| 聲學 建筑物和建筑構件的隔聲測量 第3部分:建筑物構件空氣聲隔聲的實驗室測量
| Acoustics - Measurement of sound insulation in buildings and of building elements - Part 3: Laboratory measurements of airborne sound insulation of building elements
|
| ISO 140-4-1998
| 聲學 建筑物和建筑構件的隔聲測量 第4部分:房間之間空氣聲隔聲的現場測量
| Acoustics - Measurement of sound insulation in buildings and of building elements - Part 4: Field measurements of airborne sound insulation between rooms
|
| ISO 140-5-1998
| 聲學 建筑和建筑構件的隔聲測量 第5部分:外墻構件和外墻空氣聲隔聲的現場測量
| Acoustics - Measurement of sound insulation in buildings and of building elements - Part 5: Field measurements of airborne sound insulation of fa?ade elements and facades
|
| ISO 140-6-1998
| 聲學 建筑物和建筑構件的隔聲測量 第6部分:地板撞擊聲隔聲的實驗室測量
| Acoustics - Measurement of sound insulation in buildings and of building elements - Part 6: Laboratory measurements of impact sound insulation of floors
|
| ISO 140-7-1998
| 聲學 建筑物和建筑構件的隔聲測量 第7部分:地板撞擊聲隔聲的現場測量
| Acoustics - Measurement of sound insulation in buildings and of building elements - Part 7: Field measurements of impact sound insulation of floors
|
| ISO 140-8-1997
| 聲學 建筑物和建筑構件的隔聲測量 第8部分:重型標準地板上敷設面層使傳遞的撞擊噪聲減低的實驗室測量
| Acoustics - Measurement of sound insulation in buildings and of building elements - Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor
|
| ISO 14139-2000
| 水文測驗 應用建筑物做明渠水流測量 復合測流建筑物
| Hydrometric determinations - Flow measurements in open channels using structures - Compound gauging structures
|
| ISO 14438-2002
| 建筑物用玻璃.能量平衡值的測定.計算法
| Glass in building - Determination of energy balance value - Calculation method
|
| ISO 14683-1999
| 建筑結構熱橋 線性傳熱系數 簡易法及默認值
| Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values
|
| ISO 14697-2007
| 對火反應試驗.建筑和運輸產品用襯底選擇指南
| Reaction-to-fire tests - Guidance on the choice of substrates for building and transport products
|
| ISO 15148-2002
| 建筑材料和產品的溫濕性能.部分浸入法測定吸水系數
| Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion
|
| ISO 15186-1-2000
| 聲學 用聲強作建筑物和建筑構件的隔聲測量 第1部分:實驗室測量
| Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1: Laboratory measurements
|
| ISO 15186-2-2003
| 聲學.用聲強測定建筑物和建筑構件的隔聲性能.第2部分:現場測量
| Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 2: Field measurements
|
| ISO 15186-3-2002
| 聲學.用聲強進行建筑物和建筑構件的隔聲測量.第3部分:低頻率實驗室測量
| Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 3: Laboratory measurements at low frequencies
|
| ISO 15642-2003
| 道路建筑和維護設備.瀝青混合設備.術語和商業規范
| Road construction and maintenance equipment - Asphalt mixing plants - Terminology and commercial specifications
|
| ISO 15643-2002
| 道路建筑和養護設備.瀝青粘合劑布料/噴料機.術語和商業規范
| Road construction and maintenance equipment - Bituminous binder spreaders/sprayers - Terminology and commercial specifications
|
| ISO 15644-2002
| 道路建筑和維修設備. 碎屑延輾機.術語和商業規范
| Road construction and maintenance equipment - Chippings spreaders - Terminology and commercial specifications
|
| ISO 15645-2002
| 道路建筑和維修設備. 路面切槽機.術語和商業規范
| Road construction and maintenance equipment - Road milling machinery - Terminology and commercial specifications
|
| ISO 15673-2005
| 建筑物結構加筋混凝土的簡易設計指南
| Guidelines for the simplified design of structural reinforced concrete for buildings
|
| ISO 15686-1-2000
| 房屋和建筑資產 服務年限計劃 第1部分:一般原則
| Buildings and constructed assets - Service life planning - Part 1: General principles
|
| ISO 15686-2-2001
| 房屋和建筑資產 服務年限計劃 第2部分：服務年限預計程序
| Buildings and constructed assets - Service life planning - Part 2: Service life prediction procedures
|
| ISO 15686-3-2002
| 房屋和建筑資產.服務年限計劃.第3部分:性能審核和檢驗
| Building and constructed assets - Service life planning - Part 3: Performance audits and reviews
|
| ISO 15686-6-2004
| 房屋和建筑資產.服務壽命規劃.第6部分:考慮環境影響的規程
| Buildings and constructed assets - Service life planning - Part 6: Procedures for considering environmental impacts
|
| ISO 15686-7-2006
| 房屋和建筑資產.服務壽命規劃.第6部分:實踐中服務壽命數據的反饋評價性能
| Buildings and constructed assets - Service life planning - Part 7: Performance evaluation for feedback of service life data from practice
|
| ISO 15712-1-2005
| 建筑聲學.從建筑構件性能評定建筑物聲學性能.第1部分:房間之間的空氣聲隔絕
| Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms
|
| ISO 15712-2-2005
| 建筑聲學.從建筑構件性能評定建筑物聲學性能.第2部分:房間之間的沖擊聲隔絕
| Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms
|
| ISO 15712-3-2005
| 建筑聲學.從建筑構件性能評定建筑物聲學性能.第3部分:防室外聲音的空氣聲隔絕
| Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound
|
| ISO 15712-4-2005
| 建筑聲學.從建筑構件性能評定建筑物聲學性能.第4部分:室內聲音傳播到室外
| Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 4: Transmission of indoor sound to the outside
|
| ISO 15748-1-2002
| 船舶和海運技術.在船上和海上建筑物上飲用水的供應.第1部分:計劃和設計
| Ships and marine technology - Potable water supply on ships and marine structures - Part 1: Planning and design
|
| ISO 15748-2-2002
| 船舶和海運技術.在船上和海上建筑物上飲用水的供應.第2部分:計算方法
| Ships and marine technology - Potable water supply on ships and marine structures - Part 2: Method of calculation
|
| ISO 15758-2004
| 建筑物設備和工業裝置的溫濕性能.水蒸氣擴散的計算.冷管絕緣系統
| Hygrothermal performance of building equipment and industrial installations - Calculation of water vapour diffusion - Cold pipe insulation systems
|
| ISO 15927-1-2003
| 建筑的溫濕性能.氣候數據的計算和表示.第1部分:單一氣象元素的月均值
| Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 1: Monthly means of single meteorological elements
|
| ISO 15927-4-2005
| 建筑的溫濕性能.氣候數據的計算和表示.第4部分:加熱和冷卻的年能量使用評定用小時數據
| Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 4: Hourly data for assessing the annual energy use for heating and cooling
|
| ISO 15927-5-2004
| 建筑的溫濕性能.氣候數據的計算和表示.第5部分:空間加熱用熱負荷設計用數據
| Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating
|
| ISO 15927-6-2007
| 建筑的溫濕性能.氣候數據的計算和表示.第6部分:積聚的溫差(戶外每日平均溫度的單位)
| Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 6: Accumulated temperature differences (degree-days)
|
| ISO 16000-10-2006
| 室內空氣.第10部分:建筑產品和家具釋放揮發性有機化合物的測定.釋放試驗室法
| Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method
|
| ISO 16000-11-2006
| 室內空氣.第11部分:建筑產品和家具釋放揮發性有機化合物的測定.取樣、樣品儲藏和試驗樣品的準備
| Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens
|
| ISO 16000-8-2007
| 室內空氣.第8部分:建筑物特種通風條件下局部空氣存留時間的測定
| Indoor air - Part 8: Determination of local mean ages of air in buildings for characterizing ventilation conditions
|
| ISO 16000-9 Technical Corrigendum 1-2007
| 室內空氣.第9部分:建筑產品和家具揮發性有機化合物排放的測定.排放試驗室法.技術勘誤1
| Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method; Technical Corrigendum 1
|
| ISO 16000-9-2006
| 室內空氣.第9部分:建筑產品和家具釋放揮發性有機化合物的測定.釋放試驗室法
| Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method
|
| ISO 16032-2004
| 聲學.建筑物中服務設備的聲壓級測量.工程法
| Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method
|
| ISO 16484-2-2004
| 建筑自動化和控制系統(BACS).第2部分:硬件
| Building automation and control systems (BACS) - Part 2: Hardware
|
| ISO 16484-3-2005
| 建筑自動化和控制系統(BACS).第3部分:功能
| Building automation and control systems (BACS) - Part 3: Functions
|
| ISO 16484-5-2007
| 建筑自動化和控制系統.第5部分:數據通信協議
| Building automation and control systems - Part 5: Data communication protocol
|
| ISO 16484-6-2005
| 建筑自動化和控制系統(BACS).第6部分:數據通信一致性試驗
| Building automation and control systems (BACS) - Part 6: Data communication conformance testing
|
| ISO 16813-2006
| 建筑環境設計.室內環境.一般原則
| Building environment design - Indoor environment - General principles
|
| ISO 16932-2007
| 建筑玻璃.抗暴風破壞的保險玻璃.試驗和分類
| Glass in building - Destructive-windstorm-resistant security glazing - Test and classification
|
| ISO 16933-2007
| 建筑玻璃.抗爆炸保險門窗玻璃.舞臺空氣爆炸載荷試驗和分類
| Glass in building - Explosion-resistant security glazing - Test and classification for arena air-blast loading
|
| ISO 16934-2007
| 建筑玻璃.抗爆炸保險門窗玻璃.沖擊管裝填試驗和分類
| Glass in building - Explosion-resistant security glazing - Test and classification by shock-tube loading
|
| ISO 16935-2007
| 建筑玻璃.防彈安全玻璃.試驗和分類
| Glass in building - Bullet-resistant security glazing - Test and classification
|
| ISO 16936-1-2005
| 建筑物玻璃.防止強行進入的保險玻璃.第1部分:用反復球跌落進行試驗和分類
| Glass in building - Forced-entry security glazing - Part 1: Test and classification by repetitive ball drop
|
| ISO 16936-2-2005
| 建筑物玻璃.防止強行進入的保險玻璃.第2部分:室溫下用錘和斧反復沖擊進行試驗和分類
| Glass in building - Forced-entry security glazing - Part 2: Test and classification by repetitive impact of a hammer and axe at room temperature
|
| ISO 16936-3-2005
| 建筑物玻璃.防止強行進入的保險玻璃.第3部分:根據人為攻擊進行的試驗和分類
| Glass in building - Forced-entry security glazing - Part 3: Test and classification by manual attack
|
| ISO 16936-4-2005
| 建筑物玻璃.防止強行進入的保險玻璃.第4部分:根據高溫和著火條件下的擺錘沖擊進行試驗和分類
| Glass in building - Forced-entry security glazing - Part 4: Test and classification by pendulum impact under thermally and fire stressed conditions
|
| ISO 1716-2002
| 建筑產品耐火反應試驗.燃燒熱的測定
| Reaction to fire tests for building products - Determination of the heat of combustion
|
| ISO 17194-2007
| 建筑膠粘劑.特性的標準數據庫
| Structural adhesives - A standard database of properties
|
| ISO 1791-1983
| 房屋建筑 模數協調 詞匯 兩種語言版
| Building construction; Modular co-ordination; Vocabulary Bilingual edition
|
| ISO 1803-1997
| 房屋建筑 公差 尺度準確度的表達 原則和術語
| Building construction - Tolerances - Expression of dimensional accuracy - Principles and terminology
|
| ISO 18233-2006
| 聲學.建筑物和房間聲學新測量方法的應用
| Acoustics - Application of new measurement methods in building and room acoustics
|
| ISO 18650-1-2004
| 建筑施工機械和設備.混凝土攪拌機.第1部分:詞匯和一般規范
| Building construction machinery and equipment - Concrete mixers - Part 1: Vocabulary and general specifications
|
| ISO 18650-2-2006
| 建筑施工機械和設備.混凝土攪拌機.第2部分:攪拌功效檢查程序
| Building construction machinery and equipment - Concrete mixers - Part 2: Procedure for examination of mixing efficiency
|
| ISO 18652-2005
| 房屋建筑機械和設備.混凝土用外部振搗器
| Building construction machinery and equipment - External vibrators for concrete
|
| ISO 19220-2004
| 建筑物內土壤和廢物排放(低溫和高溫)用塑料管道系統.苯乙烯共聚物混合料(SAN + PVC)
| Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Styrene copolymer blends (SAN + PVC)
|
| ISO 19432-2006
| 建筑施工機械和設備.便攜、手持、內燃機驅動的切斷機.安全要求和試驗
| Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements and testing
|
| ISO 19901-1-2005
| 石油和天然氣工業.海上建筑物的特殊要求.第1部分:Metocean設計和運行研究
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations
|
| ISO 19901-2-2004
| 石油和天然氣工業.近海建筑物的特殊要求.第2部分:地震設計規程和標準
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 2: Seismic design procedures and criteria
|
| ISO 19901-4-2003
| 石油和天然氣工業.近海建筑物的特殊要求.第4部分:土工和基礎設計考慮
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical and foundation design considerations
|
| ISO 19901-5-2003
| 石油和天然氣工業.海上建筑物的特殊要求.第5部分:設計和施工過程中的重量控制
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction
|
| ISO 19901-7-2005
| 石油和天然氣工業.海上建筑物的特殊要求.第7部分:浮動式海上建筑物和移動式海上設備用保持系統
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units
|
| ISO 19903-2006
| 石油和天然氣工業.海上固定的混凝土建筑物
| Petroleum and natural gas industries - Fixed concrete offshore structures
|
| ISO 20340-2003
| 色漆和清漆.用于近海建筑及相關結構的保護性涂料系統的性能要求
| Paints and varnishes - Performance requirements for protective paint systems for offshore and related structures
|
| ISO 2103-1986
| 住宅和公共建筑物的居住和使用荷載
| Loads due to use and occupancy in residential and public buildings
|
| ISO 21129-2007
| 建筑材料和產品的溫濕性能.水蒸汽透過率特性測定.箱法
| Hygrothermal performance of building materials and products - Determination of water-vapour transmission properties - Box method
|
| ISO 21537-2-2004
| 超磨料切割砂輪用夾具法蘭.第2部分:建筑和施工
| Clamping flanges for superabrasive cutting-off wheels - Part 2: Building and construction
|
| ISO 21538-2004
| 超磨料切割砂輪用坯件.安裝和固定孔.建筑施工和土木工程
| Blanks for superabrasive cutting-off wheels - Mounting and fixing bores - Building construction and civil engineering
|
| ISO 21573-1-2006
| 建筑施工機械和設備.混凝土泵.第1部分:技術和工業規范
| Building construction machinery and equipment - Concrete pumps - Part 1: Terminology and commercial specifications
|
| ISO 21592-2006
| 建筑物建造機械和設備.混凝土噴霧器.技術和工業規范
| Building construction machinery and equipment - Concrete spraying machines - Terminology and commercial specifications
|
| ISO 21690-2006
| 建筑物玻璃.玻璃磚.規范和試驗方法
| Glass in building - Glass blocks - Specification and test methods
|
| ISO 21930-2007
| 建筑施工的可持續性.建筑制品的環境聲明
| Sustainability in building construction - Environmental declaration of building products
|
| ISO 22762-3 Technical Corrigendum 1-2006
| 人造橡膠地震防護隔離物.第3部分:建筑物用設備.規范.技術勘誤1
| Elastomeric seismic-protection isolators - Part 3: Applications for buildings - Specifications; Technical Corrigendum 1
|
| ISO 22762-3-2005
| 彈性地震防護隔離物.第3部分:應用于建筑物.規范
| Elastomeric seismic-protection isolators - Part 3: Applications for buildings - Specifications
|
| ISO 22897-2003
| 建筑物用玻璃.玻璃和空氣噪聲隔絕.產品描述和性能測定
| Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties
|
| ISO 23469-2005
| 建筑物設計基礎.設計土工作業的地震效果
| Bases for design of structures - Seismic actions for designing geotechnical works
|
| ISO 24314-2006
| 結構鋼.提高建筑物抗震性結構鋼.交貨技術條件
| Structural steels - Structural steels for building with improved seismic resistance - Technical delivery conditions
|
| ISO 2444-1988
| 建筑接縫 詞匯
| Joints in building; vocabulary
|
| ISO 2445-1972
| 建筑接縫 設計的基本原則
| Joints in building; Fundamental principles for design
|
| ISO 24531-2007
| 職能運輸系統.系統建筑學、分類學和術語學.在ITS標準、數據注冊和數據字典中使用可擴展標記語言(XML)
| Intelligent transport systems - System architecture, taxonomy and terminology - Using XML in ITS standards, data registries and data dictionaries
|
| ISO 2594-1972
| 建筑制圖 投影法
| Building drawings; Projection methods
|
| ISO 2631-2-2003
| 機械振動和沖擊.人體處于全身振動的評價.第2部分:建筑物內的振動(1-80Hz)
| Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 2: Vibration in buildings (1 Hz to 80 Hz)
|
| ISO 2695-1976
| 建筑用纖維板 一般用途硬質和中質板:質量規范 外觀、形狀和尺寸公差
| Fibre building boards; Hard and medium boards for general purposes; Quality specifications; Appearance, shape and dimensional tolerances
|
| ISO 2696-1976
| 建筑用纖維板 一般用途硬質和中質板:質量規范 吸水性和厚度膨脹
| Fibre building boards; Hard and medium boards for general purposes; Quality specifications; Water absorption and swelling in thickness
|
| ISO 2777-1974
| 模數協調 用于建筑物中的剛性平板的協調尺寸
| Modular co-ordination; Co-ordinating sizes for rigid flat sheet boards used in building
|
| ISO 2848-1984
| 房屋建筑.模數協調.原理和規定
| Building construction; Modular coordination; Principles and rules
|
| ISO 3009-2003
| 耐火試驗.房屋建筑構件.鑲玻璃構件
| Fire-resistance tests - Elements of building construction - Glazed elements
|
| ISO 3340-1976
| 建筑用纖維板 含砂量的測定
| Fibre building boards; Determination of sand content
|
| ISO 3443-1-1979
| 建筑公差 第1部分:評價與規定公差的基本原則
| Tolerances for building; Part 1 : Basic principles for evaluation and specification
|
| ISO 3443-2-1979
| 建筑公差 第2部分:預測具有正態分布尺寸的組合體之間配合的統計基礎
| Tolerances for building; Part 2 : Statistical basis for predicting fit between components having a normal distribution of sizes
|
| ISO 3443-3-1987
| 建筑公差 第3部分:選擇目標尺寸和預測公差的程序
| Tolerances for building; Part 3 : Procedures for selecting target size and predicting fit
|
| ISO 3443-4-1986
| 建筑公差 第4部分:預測安裝偏差和分配公差的方法
| Tolerances for building; Part 4 : Method for predicting deviations of assemblies and for allocation of tolerances
|
| ISO 3443-5-1982
| 房屋建筑 建筑公差 第5部分:用于公差規定的數值系列
| Building construction; Tolerances for building; Part 5 : Series of values to be used for specification of tolerances
|
| ISO 3443-6-1986
| 建筑公差 第6部分:驗收標準及根據尺度公差規定和統計控制進行驗收的一般原則 方法1
| Tolerances for building; Part 6 : General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control; Method 1
|
| ISO 3443-7-1988
| 建筑公差 第7部分:驗收標準及根據尺度公差規定和統計控制進行驗收的一般原則 方法2(統計控制方法)
| Tolerances for building; part 7: general principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control; method 2 (statistical control method)
|
| ISO 3443-8-1989
| 建筑公差 第8部分:尺度檢驗和施工控制
| Tolerances for building; part 8: dimensional inspection and control of construction work
|
| ISO 3447-1975
| 建筑接縫 接縫功能的一般檢驗項目
| Joints in building; General check-list of joint functions
|
| ISO 3546-1976
| 建筑用纖維板 表面光潔度(粗糙度)的測定
| Fibre building boards; Determination of surface finish (roughness)
|
| ISO 3633-2002
| 建筑物內污廢水排放系統用硬聚氯乙烯(PVC-U)塑料管道系統(低溫和高溫)
| Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U)
|
| ISO 3729-1976
| 建筑用纖維板 表面穩定性的測定
| Fibre building boards; Determination of surface stability
|
| ISO 3766-2003
| 建筑工程制圖.混凝土加筋的簡化畫法
| Construction drawings - Simplified representation of concrete reinforcement
|
| ISO 3880-1-1977
| 房屋建筑 樓梯 詞匯 第1部分 兩種語言版
| Building construction; Stairs; Vocabulary; Part I Bilingual edition
|
| ISO 3881-1977
| 房屋建筑 模數協調 樓梯和樓板梯洞 尺寸協調
| Building construction; Modular co-ordination; Stairs and stair openings; Co-ordinating dimensions
|
| ISO 3934-2002
| 建筑用預成型硫化熱塑橡膠墊.分類、規范和試驗方法
| Rubber, vulcanized and thermoplastic - Preformed gaskets used in buildings - Classification, specifications and test methods
|
| ISO 4067-2-1980
| 建筑和土木工程制圖 設備 第2部分:衛生器材的簡化畫法
| Building and civil engineering drawings; Installations; Part 2 : Simplified representation of sanitary appliances
|
| ISO 4157-1-1998
| 建筑工程制圖 代號體系 第1部分:建筑物和建筑物的組成部分
| Construction drawings - Designation systems - Part 1: Buildings and parts of buildings
|
| ISO 4157-2-1998
| 建筑工程制圖 代號體系 第2部分:空間命名與編號
| Construction drawings - Designation systems - Part 2: Room names and numbers
|
| ISO 4157-3-1998
| 建筑工程制圖 代號體系 第3部分:空間標識
| Construction drawings - Designation systems - Part 3: Room identifiers
|
| ISO 4172-1991
| 技術制圖 建筑工程制圖 預制結構的安裝圖
| Technical drawings; construction drawings; drawings for the assembly of prefabricated structures
|
| ISO 4356-1977
| 結構設計基礎 建筑物正常使用極限狀態下的變形
| Bases for the design of structures; Deformations of buildings at the serviceability limit states
|
| ISO 4362-1999
| 水文測驗 應用建筑物做明渠水流測量 梯形寬頂堰
| Hydrometric determinations - Flow measurement in open channels using structures - Trapezoidal broad-crested weirs
|
| ISO 4463-1-1989
| 建筑物的測量方法 定線和測量 第1部分:計劃和組織、測量程序、驗收標準
| Measurement methods for building; setting-out and measurement; part 1: planning and organization, measuring procedures, acceptance criteria
|
| ISO 4463-2-1995
| 建筑物的測量方法 定線和測量 第2部分:測站和目標
| Measurement methods for building - Setting-out and measurement - Part 2: Measuring stations and targets
|
| ISO 4463-3-1995
| 建筑物的測量方法 定線和測量 第3部分:觀測和測量作業所獲資料的檢查目錄
| Measurement methods for building - Setting-out and measurement - Part 3: Check-lists for the procurement of surveys and measurement services
|
| ISO 4866 AMD 1-1994
| 機械振動與沖擊 建筑物振動 振動對建筑物影響的測量和評定指南 修改1
| Mechanical vibration and shock - Vibration of buildings - Guidelines for the measurement of vibrations and evaluation of their effects on buildings; Amendment 1
|
| ISO 4866 AMD 2-1996
| 機械振動與沖擊 建筑物振動 振動對建筑物影響的測量和評定指南 修改2
| Mechanical vibration and shock - Vibration of buildings - Guidelines for the measurement of vibrations and evaluation of their effects on buildings; Amendment 2
|
| ISO 4866 DAM 1-1991
| 機械振動和沖擊.建筑物的振動.振動測量及其對建筑物影響的評定指南.第1次修改
| Mechanical vibration and shock; vibration of buildings; guidelines for the measurement of vibrations and evaluation of their effects on buildings; amendment 1
|
| ISO 4866-1990
| 機械振動與沖擊 建筑物振動 振動對建筑物影響的測量和評定指南
| Mechanical vibration and shock; vibration of buildings; guidelines for the measurement of vibrations and evaluation of their effects on buildings
|
| ISO 4898-2006
| 硬質泡沫塑料.建筑物用熱絕緣產品.規范
| Rigid cellular plastics - Thermal insulation products for buildings - Specifications
|
| ISO 4999-2005
| 商用、拉制和建筑用連續熱鍍錫(鉛合金)冷軋?zhí)妓乇′摪? | Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
|
| ISO 5657-1997
| 對火反應試驗 使用單輻射熱源的建筑制品的可燃性
| Reaction to fire tests - Ignitability of building products using a radiant heat source
|
| ISO 5658-2-2006
| 對火反應試驗.火焰?zhèn)鞑?第2部分:在垂豎直建筑結構上火焰?zhèn)认騻鞑? | Reaction to fire tests - Spread of flame - Part 2: Lateral spread on building and transport products in vertical configuration
|
| ISO 5892-1981
| 建筑橡膠襯墊 預成型密實的硫化結構襯墊材料 規范
| Rubber building gaskets; Materials for preformed solid vulcanized structural gaskets; Specification
|
| ISO 6105-1-2004
| 超級研磨切割砂輪用坯件.第1部分:建筑物和土木工程用人工切割
| Blanks for superabrasive cutting-off wheels - Part 1: Manually guided cutting-off in building and civil engineering
|
| ISO 6105-2-2004
| 超級研磨切割砂輪用坯件.第2部分:建筑物和土木工程用手持式切割
| Blanks for superabrasive cutting-off wheels - Part 2: Hand-held cutting-off in building and civil engineering
|
| ISO 6240-1980
| 建筑物的性能標準 內容和表示方法
| Performance standards in building; Contents and presentation
|
| ISO 6241-1984
| 建筑物的性能標準 編寫原則和應考慮的因素
| Performance standards in building; Principles for their preparation and factors to be considered
|
| ISO 6242-1-1992
| 房屋建筑 用戶要求的表達 第1部分:熱要求
| Building construction; expression of users' requirements; part 1: thermal requirements
|
| ISO 6242-2-1992
| 房屋建筑 用戶要求的表達 第2部分:空氣品質要求
| Building construction; expression of users' requirements; part 2: air purity requirements
|
| ISO 6242-3-1992
| 房屋建筑 用戶要求的表達 第3部分:聲學要求
| Building construction; expression of users' requirements; part 3: acoustical requirements
|
| ISO 6243-1997
| 建筑設計氣象數據 建議的符號系統
| Climatic data for building design - Proposed system of symbols
|
| ISO 6284-1996
| 建筑工程制圖 公差限值表示法
| Construction drawings - Indication of limit deviations
|
| ISO 6511-1982
| 房屋建筑.模數協調.垂直尺寸的模數化樓房平面
| Building construction; Modular coordination; Modular floor plane for vertical dimensions
|
| ISO 6512-1982
| 房屋建筑.模數協調.層高度和房間高度
| Building construction; Modular coordination; Storey heights and room heights
|
| ISO 6513-1982
| 房屋建筑 模數協調 水平尺寸的擴大模數尺寸優化系列
| Building construction; Modular coordination; Series of preferred multimodular sizes for horizontal dimensions
|
| ISO 6514-1982
| 房屋建筑 模數協調 分模數增量
| Building construction; Modular coordination; Sub-modular increments
|
| ISO 6589-1983
| 建筑接縫.接縫空氣滲透性能的實驗室試驗方法
| Joints in building; Laboratory method of test for air permeability of joints
|
| ISO 6707-1-2004
| 建筑和土木工程 詞匯 第1部分:一般術語
| Building and civil engineering - Vocabulary - Part 1: General terms
|
| ISO 6707-2-1993
| 建筑和土木工程 詞匯 第2部分:合同術語 兩種語言版
| Buildings and civil engineering; vocabulary; part 2: contract terms
|
| ISO 6781-1983
| 絕熱.建筑圍護結構熱缺陷的定性探測.紅外線法
| Thermal insulation; Qualitative detection of thermal irregularities in building envelopes; Infrared method
|
| ISO 6897-1984
| 固定建筑物特別是建筑物和海上結構的居住者對低頻(0.063-1Hz)水平運動響應的評定指南
| Guidelines for the evaluation of the response of occupants of fixed structures, especially buildings and off-shore structures, to low-frequency horizontal motion (0,063 to 1 Hz)
|
| ISO 6927-1981
| 房屋建筑 連接件 密封件 詞匯 兩種語言版
| Building construction; Jointing products; Sealants; Vocabulary Bilingual edition
|
| ISO 6946 AMD 1-2003
| 建筑部件與構件.熱電阻和傳熱系數.計算方法.修改1
| Building components and building elements - Thermal resistance and thermal transmittance - Calculation method; Amendment 1
|
| ISO 6946-1996
| 建筑構件和建筑單元 熱阻和傳熱系數 計算方法
| Building components and building elements - Thermal resistance and thermal transmittance - Calculation method
|
| ISO 7077-1981
| 建筑物的測量方法 確定尺度配合的一般原則和步驟
| Measuring methods for building; General principles and procedures for the verification of dimensional compliance
|
| ISO 7078-1985
| 房屋建筑 放線、測量和觀測程序 詞匯和指導性注解 兩種語言版
| Building construction; Procedures for setting out, measurement and surveying; Vocabulary and guidance notes Bilingual edition
|
| ISO 7162-1992
| 建筑物的性能標準 性能評定標準的內容和格式
| Performance standards in building; contents and format of standards for evaluation of performance
|
| ISO 717-1 AMD 1-2006
| 聲學.建筑和建筑構件的隔聲評級.第1部分:空氣隔聲.修改件1:與單數評級和單數質量相關的舍入原則
| Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation; Amendment 1: Rounding rules related to single number ratings and single number quantities
|
| ISO 717-1-1996
| 聲學 建筑和建筑構件的隔聲標定 第1部分:空氣聲隔聲
| Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation
|
| ISO 717-2 AMD 1-2006
| 聲學.建筑物和建筑物構件內的隔音評級.第2部分:沖擊聲隔離.修改件1
| Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation; Amendment 1
|
| ISO 717-2-1996
| 聲學 建筑和建筑構件的隔聲標定 第2部分:撞擊聲隔聲
| Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation
|
| ISO 7361-1986
| 建筑物的性能標準.由同一來源部件組成的外墻性能標準的表示方法
| Performance standards in building; Presentation of performance levels of fa?ades made of same-source components
|
| ISO 7389-2002
| 房屋建筑.連接件.密封膠回彈性的測定
| Building construction - Jointing products - Determination of elastic recovery of sealants
|
| ISO 7390-2002
| 房屋建筑.連接件.密封膠流動阻力的測定
| Building construction - Jointing products - Determination of resistance to flow of sealants
|
| ISO 7437-1990
| 技術制圖 建筑工程制圖 預制結構件圖紙加工通則
| Technical drawings; construction drawings; general rules for execution of production drawings for prefabricated structural components
|
| ISO 7518-1983
| 技術制圖 建筑工程制圖 拆除和重建的簡化畫法
| Technical drawings; Construction drawings; Simplified representation of demolition and rebuilding
|
| ISO 7519-1991
| 技術制圖 建筑工程制圖 總體布置圖和安裝圖畫法的一般原則
| Technical drawings; construction drawings; general prinicples of presentation for general arrangement and assembly drawings
|
| ISO 7671-2003
| 建筑物內污、廢水排放(低溫和高溫)用塑料管道系統.聚丙烯(PP)
| Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polypropylene (PP)
|
| ISO 7675-2003
| 建筑物內污、廢水(低溫和高溫)排放用塑料管道系統.氯化聚氯乙烯
| Plastic piping systems for soil and waste discharge (low and high temperature) inside buildings - Chlorinated poly(vinyl chloride) (PVC-C)
|
| ISO 7682-2003
| 建筑物內污、廢水排放(低溫和高溫)用塑料管道系統.丙烯腈-丁二烯-苯乙烯(ABS)
| Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Acrylonitrile-butadiene-styrene (ABS)
|
| ISO 769-1972
| 建筑用纖維板 硬質和中質板:浸水后吸水性和厚度膨脹的測定
| Fibre building boards; Hard and medium boards; Determination of water absorption and of swelling in thickness after immersion in water
|
| ISO 7727-1984
| 建筑接縫 建筑構件的接縫原則 施工階段尺度偏差的調節
| Joints in building; Principles for jointing of building components; Accommodation of dimensional deviations during construction
|
| ISO 7737-1986
| 建筑公差 尺寸準確度數據的表示法
| Tolerances for building; Presentation of dimensional accuracy data
|
| ISO 7892-1988
| 豎向建筑構件 抗撞擊試驗 撞擊物和一般試驗程序
| Vertical building elements; impact resistance tests; impact bodies and general test procedures
|
| ISO 7976-1-1989
| 建筑公差 建筑物和建筑制品的測量方法 第1部分:方法和儀器
| Tolerances for building; methods of measurement of buldings and building products; part 1: methods and instruments
|
| ISO 7976-2-1989
| 建筑公差 建筑物和建筑制品的測量方法 第2部分:測點的位置
| Tolerances for building; methods of measurement of buildings and building products; part 2: position of measuring points
|
| ISO 8048-1984
| 技術制圖 建筑工程制圖 視圖、剖面圖和斷面圖的表示法
| Technical drawings; Construction drawings; Representation of views, sections and cuts
|
| ISO 8283-1-1991
| 塑料管材和管件 建筑物內排水系統的承口和插口尺寸 第1部分:硬聚氯乙烯(PVC-U)和氯化聚氯乙烯(PVC-C)
| Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 1: unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C)
|
| ISO 8283-2-1992
| 塑料管材和管件 建筑物內排水系統的承口和插口尺寸 第2部分:聚乙烯(PE)
| Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 2: polyethylene (PE)
|
| ISO 8283-3-1992
| 塑料管材和管件 建筑物內排水系統的承口和插口尺寸 第3部分:聚丙烯(PP)
| Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 3: polypropylene (PP)
|
| ISO 8283-4-1992
| 塑料管材和管件 建筑物內排水系統的承口和插口尺寸 第4部分:丙烯腈/丁二烯/苯乙烯(ABS)
| Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 4: acrylonitrile/butadiene/styrene (ABS)
|
| ISO 8339-2005
| 房屋建筑.密封件.拉伸性能的測定(延展至斷裂)
| Building construction - Sealants - Determination of tensile properties (Extension to break)
|
| ISO 834-1-1999
| 耐火試驗 建筑構件 第1部分:一般要求
| Fire-resistance tests - Elements of building construction - Part 1: General requirements
|
| ISO 834-4-2000
| 耐火試驗 建筑構件 第4部分:承重垂直構件的特殊要求
| Fire-resistance tests - Elements of building construction - Part 4: Specific requirements for loadbearing vertical separating elements
|
| ISO 834-5-2000
| 耐火試驗 建筑構件 第5部分:承重水平構件的特殊要求
| Fire-resistance tests - Elements of building construction - Part 5: Specific requirements for loadbearing horizontal separating elements
|
| ISO 834-6-2000
| 耐火試驗 建筑構件 第6部分:梁的特殊要求
| Fire-resistance tests - Elements of building construction - Part 6: Specific requirements for beams
|
| ISO 834-7-2000
| 耐火試驗 建筑構件 第7部分:柱的特殊要求
| Fire-resistance tests - Elements of building construction - Part 7: Specific requirements for columns
|
| ISO 834-8-2002
| 耐火試驗.房屋建筑構件.第8部分:非承重垂直分離構件的特殊要求
| Fire-resistance tests - Elements of building construction - Part 8: Specific requirements for non-loadbearing vertical separating elements
|
| ISO 834-9-2003
| 耐火試驗.建筑構件.第9部分:非承重頂棚構件的特殊要求
| Fire-resistance tests - Elements of building construction - Part 9: Specific requirements for non-loadbearing ceiling elements
|
| ISO 8340-2005
| 房屋建筑.密封件.保持延伸狀態時拉伸性能的測定
| Building construction - Sealants - Determination of tensile properties at maintained extension
|
| ISO 8368-1999
| 水文測驗 應用建筑物做明渠水流測量 建筑物選擇指南
| Hydrometric determinations - Flow measurements in open channels using structures - Guidelines for selection of structure
|
| ISO 8394-1988
| 房屋建筑 連接件 單個密封件可擠壓性的測定
| Building construction; jointing products; determination of extrudability of one-component sealants
|
| ISO 8560-1986
| 技術制圖 建筑工程制圖 模數尺寸圖、圖線和網格的畫法
| Technical drawings; Construction drawings; Representation of modular sizes, lines and grids
|
| ISO 8569-1996
| 機械振動與沖擊 振動與沖擊對建筑物內敏感設備影響的測量和評定
| Mechanical vibration and shock - Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings
|
| ISO 8770-2003
| 建筑物內污、廢水排放(低溫和高溫)用塑料管道系統.聚乙烯(PE)
| Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)
|
| ISO 9046-2002
| 建筑結構.連接產品.恒溫下密封劑的粘附和粘結性能的測定
| Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature
|
| ISO 9047-2001
| 房屋建筑 連接件 變溫下密封粘合性能的測定
| Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures
|
| ISO 9048-1987
| 房屋建筑 連接件 標準元件上密封穩定性測定
| Building construction; Jointing products; Determination of extrudability of sealants using standardized apparatus
|
| ISO 9050-2003
| 建筑玻璃.光透率、日光直射率、太陽能總透射率及紫外線透射率及有關光澤系數的測定
| Glass in building - Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
|
| ISO 9051-2001
| 建筑玻璃 用于建筑中裝有耐火透明或半透明玻璃的裝置
| Glass in building - Fire-resistant glazed assemblies containing transparent or translucent glass, for use in building
|
| ISO 9242-1988
| 夾扭鉗和剪切鉗 建筑用扎線鉗 尺寸和試驗值
| Pliers and nippers - Construction worker's pincers - Dimensions and test values
|
| ISO 9431-1990
| 建筑工程制圖 圖樣說明紙和標題欄的位置
| Construction drawings; spaces for drawing and for text, and title blocks on drawing sheets
|
| ISO 9589-1994
| 自動扶梯 建筑尺寸
| Escalators - Building dimensions
|
| ISO 9616-1989
| 木工機械 建筑用圓鋸機 術語 兩種語言版
| Woodworking machines; circular sawing machines for building sites; nomenclature
|
| ISO 9699-1994
| 建筑物的性能標準 簡要檢驗項目 建筑設計的簡要內容
| Performance standards in building - Checklist for briefing - Contents of brief for building design
|
| ISO 9774-2004
| 建筑物設備的熱絕緣.選擇特性指南
| Thermal insulation for building applications - Guidelines for selecting properties
|
| ISO 9836-1992
| 建筑物的性能標準 面積和空間指標的定義和計算
| Performance standards in building; definition and calculation of area and space indicators
|
| ISO 9869-1994
| 絕熱 建筑構件 現場測量熱阻和傳熱系數
| Thermal insulation - Building elements - In-situ measurement of thermal resistance and thermal transmittance
|
| ISO 9882-1993
| 建筑物的性能標準 預制混凝土樓板的性能試驗在非集中荷載下的工況
| Performance standards in building; performance test for precast concrete floors; behaviour under non-concentrated load
|
| ISO 9883-1993
| 建筑物的性能標準 預制混凝土樓板的性能試驗 在集中荷載下的工況
| Performance standards in building; performance test for precast concrete floors; behaviour under concentrated load
|
| ISO 9896-1996
| 建筑物內排水管網系統用塑料存水彎
| Plastics traps for discharge pipework systems inside buildings
|
| ISO 9972-2006
| 建筑物的熱性能.透氣率測定.風扇增壓法
| Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method
|
| ISO/IEC 11801 Corrigendum 1-2002
| 信息技術.用戶建筑群的通用布纜.技術勘誤1
| Information technology - Generic cabling for customer premises; Corrigendum 1
|
| ISO/IEC 11801 Corrigendum 2-2002
| 信息技術.用戶建筑群的通用布纜.技術勘誤2
| Information technology - Generic cabling for customer premises; Corrigendum 2
|
| ISO/IEC 11801-2002
| 信息技術.用戶建筑群的通用布纜
| Information technology - Generic cabling for customer premises
|
| ISO/IEC 14543-3-3-2007
| 信息技術.家用電子系統(HES)建筑.第3-3部分:通訊層.基于1級HES控制網絡的用戶程序
| Information technology - Home electronic system (HES) architecture - Part 3-3: User process for network based control of HES Class 1
|
| ISO/IEC 14763-1 AMD 1-2004
| 信息技術.用戶建筑群布纜的實現和操作.第1部分:管理.修改件1
| Information technology - Implementation and operation of customer premises cabling - Part 1: Administration; Amendment 1
|
| ISO/IEC 14763-1-1999
| 信息技術.用戶建筑群布纜的實現和操作.第1部分:管理
| Information technology - Implementation and operation of customer premises cabling - Part 1: Administration
|
| ISO/IEC 14763-3-2006
| 信息技術.用戶建筑群布纜的實現和操作.第3部分:光線鋪設試驗
| Information technology - Implementation and operation of customer premises cabling - Part 3: Testing of optical fibre cabling
|
| ISO/IEC 18010 AMD 1-2005
| 信息技術.用戶建筑群布纜的路徑和空間.修改件1
| Information technology - Pathways and spaces for customer premises cabling; Amendment 1
|
| ISO/IEC 18010-2002
| 信息技術.用戶建筑群布纜的路徑和空間
| Information technology - Pathways and spaces for customer premises cabling
|
| ISO/IEC 24702-2006
| 信息技術.工業建筑綜合布線
| Information technology - Generic cabling - Industrial premises
|
| ISO/IEC 42010-2007
| 系統和軟件工程.軟件加強系統建筑學描述的推薦實施規程
| Systems and software engineering - Recommended practice for architectural description of software-intensive systems
|
| ISO/IEC TR 12075-1994
| 信息技術 用戶建筑群布纜 支持ISO/IEC8802_5令牌環站的規劃和安裝指南
| ()
|
| ISO/IEC TR 14543-4-2002
| 信息技術.家用電子系統(HES)體系結構.第4部分:住宅和混用建筑內建筑的自動化
| Information technology - Home electronic systems (HES) architecture - Part 4: Home and building automation in a mixed-use building
|
| ISO/IEC TR 14763-2-2000
| 信息技術.用戶建筑群布纜的實施和操作.第2部分:銅電纜縛設的規劃和安裝
| Information technology - Implementation and operation of customer premises cabling - Part 2: Planning and installation
|
| ISO/PAS 16940-2004
| 建筑物玻璃.門窗玻璃和空氣聲隔絕.多層玻璃機械阻抗的測量
| Glass in building - Glazing and airborne sound insulation - Measurement of the mechanical impedance of laminated glass
|
| ISO/TR 10158-1991
| 有關建筑構件耐火性的原理和基礎計算方法
| Principles and rationale underlying calculation methods in relation to fire resistance of structural elements
|
| ISO/TR 11696-1-1999
| 對火反應試驗結果的應用 第1部分:利用試驗結果預測內飾材料和其他建筑制品的燃燒性能
| Uses of reaction to fire test results - Part 1: Application of test results to predict fire performance of internal linings and other building products
|
| ISO/TR 11696-2-1999
| 對火反應試驗結果的應用 第2部分:建筑制品火焰危險性的判定
| Uses of reaction to fire test results - Part 2: Fire hazard assessment of construction products
|
| ISO/TR 11925-1-1999
| 對火反應試驗 火焰直接接觸建筑制品的點燃性 第1部分:點燃性指南
| Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Part 1: Guidance on ignitability
|
| ISO/TR 12603-1996
| 建筑施工機械和設備 分類
| Building construction machinery and equipment - Classification
|
| ISO/TR 14177-1994
| 建筑工業信息分類
| Classification of information in the construction industry
|
| ISO/TR 19033-2000
| 技術產品文件 建筑文件用元數據
| Technical product documentation - Metadata for construction documentation
|
| ISO/TR 22898-2006
| 防火工程中建筑物用防火試驗的效率評價
| Review of outputs for fire containment tests for buildings in the context of fire safety engineering
|
| ISO/TR 24532-2006
| 智能運輸系統.系統建筑學、分類學和術語學.在ITS標準、數據登記和數據字典中使用CORBA(公用對象請求代理調
| Intelligent transport systems - Systems architecture, taxonomy and terminology - Using CORBA (Common Object Request Broker Architecture) in ITS standards, data registries and data dictionaries
|
| ISO/TR 3814-1989
| 建筑材料對火反應試驗的發展與應用
| Tests for measuring "reaction-to-fire" of building materials; their development and application
|
| ISO/TR 5924-1989
| 著火試驗 對火反應 建筑制品的產煙(雙室法)
| Fire tests; reaction to fire; smoke generated by building products (dual-chamber test)
|
| ISO/TR 7240-14-2003
| 火災探測和報警系統.第14部分:建筑物內部和外部使用的火災探測和報警系統的設計、安裝和使用規程的標準起草
| Fire detection and alarm systems - Part 14: Guidelines for drafting codes of practice for design, installation and use of fire detection and fire alarm systems in and around buildings
|
| ISO/TR 834-3-1994
| 耐火試驗 建筑構件 第3部分:有關試驗方法及試驗數據應用的說明
| Fire resistance tests - Elements of building construction - Part 3: Commentary on test method and test data application
|
| ISO/TR 8389-1984
| 房屋建筑 模數協調 確定擴大模數尺寸的優化數值體系
| Building construction; Modular coordination; System of preferred numbers defining multimodular sizes
|
| ISO/TR 8390-1984
| 房屋建筑 模數協調 水平擴大模數的應用
| Building construction; Modular coordination; Application of horizontal multimodules
|
| ISO/TR 9165-1988
| 建筑材料和制品的實際熱性質
| Practical thermal properties of building materials and products
|
| ISO/TR 9527-1994
| 房屋建筑 建筑物中殘疾人的需要 設計指南
| Building construction - Needs of disabled people in buidlings - Design guidelines
|
| ISO/TS 10303-1144-2005
| 工業自動化系統和集成.產品數據表示和交換.第1144部分:應用模塊:建筑項目
| Industrial automation systems and integration - Product data representation and exchange - Part 1144: Application module: Building item
|
| ISO/TS 10303-1145-2005
| 工業自動化系統和集成.產品數據表示和交換.第1145部分:應用模塊:建筑結構
| Industrial automation systems and integration - Product data representation and exchange - Part 1145: Application module: Building structure
|
| ISO/TS 10303-1146-2005
| 工業自動化系統和集成.產品數據表示和交換.第1146部分:應用模塊:建筑位置
| Industrial automation systems and integration - Product data representation and exchange - Part 1146: Application module: Location in building
|
| ISO/TS 10303-325-2004
| 工業自動化系統和集成.產品數據表示和交換.第325部分:抽象測試套:用顯式形狀表示法表示的建筑物構件
| Industrial automation systems and integration - Product data representation and exchange - Part 325: Abstract test suite: Building elements using explicit shape representation
|
| ISO/TS 10811-1-2000
| 機械振動與沖擊 具有敏感設備的建筑物的振動和沖擊 第1部分:測量和評價
| Mechanical vibration and shock - Vibration and shock in buildings with sensitive equipment - Part 1: Measurement and evaluation
|
| ISO/TS 10811-2-2000
| 機械振動與沖擊 具有敏感設備的建筑物的振動和沖擊 第2部分:分類
| Mechanical vibration and shock - Vibration and shock in buildings with sensitive equipment - Part 2: Classification
|
| ISO/TS 21929-1-2006
| 建筑施工的可持續性.可持續性指示器.第1部分:建筑物用指示器的開發框架
| Sustainability in building construction - Sustainability indicators - Part 1: Framework for development of indicators for buildings
|
| ISO/TS 21931-1-2006
| 建筑施工的可持續性.施工環境性能評定方法的框架.第1部分:建筑物
| Sustainability in building construction - Framework for methods of assessment for environmental performance of construction works - Part 1: Buildings
|
| ISO/TS 7024-2005
| 建筑物內污水廢水排放用塑料管道系統(低溫和高溫).熱塑塑料.推薦的安裝規范
| Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Thermoplastics - Recommended practice for installation
|
| 編號 | 中文名稱 | 英文名稱 |
|---|