| 編號 | 中文名稱 | 英文名稱 |
|---|
| IEC 60050-461 AMD 1-1993
| 國際電工詞匯 第461章:電纜 修改1
| International electrotechnical vocabulary; chapter 461: electric cables; amendment 1
|
| IEC 60050-461 AMD 2-1999
| 國際電工詞匯 第461章:電纜 修改2
| International Electrotechnical Vocabulary - Chapter 461: Electric cables; Amendment 2
|
| IEC 60050-461-1984
| 國際電工詞匯 第461部分:電纜
| International Electrotechnical Vocabulary. Part 461 : Chapter 461: Electric cables
|
| IEC 60055-1 AMD 1-2005
| 修改件1.額定電壓18/30KV及以下的銅或鋁導線紙絕緣金屬護套電纜(不包括壓氣電纜和充油電纜).第1部分:電纜及
| Amendment 1 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories
|
| IEC 60055-1 Edition 5.1-2005
| 額定電壓18/30kV及以下銅或鋁導線紙絕緣金屬護套電纜(不包括壓氣電纜和充油電纜).第1部分:電纜及其附件的試
| Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories
|
| IEC 60055-1-1997
| 額定電壓18/30kV及以下銅或鋁導線紙絕緣金屬護套電纜(不包括壓氣電纜和充油電纜) 第1部分:電纜及其附件試驗
| Paper-insulated metal-sheathed cabled for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories
|
| IEC 60055-2 AMD 1-1989
| 額定電壓18/30kV及以下銅或鋁導線紙絕緣金屬護套電纜(不包括壓氣電纜和充油電纜) 第2部分:一般要求和結構要
| Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables); part 2: general and construction requirements; amendment No. 1 to IEC 60055-2:1981
|
| IEC 60055-2 AMD 2-2005
| 修改件2.額定電壓18/30KV及以下的銅或鋁導線紙絕緣金屬護套電纜(不包括壓氣電纜和充油電纜).第2部分:一般要
| Amendment 2 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 2: General and construction requirements
|
| IEC 60055-2-1981
| 額定電壓18/30kV及以下銅或鋁導線紙絕緣金屬護套電纜(不包括壓氣電纜和充油電纜) 第2部分:一般要求和結構要
| Paper-insulated metal-sheathed cabled for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables); Part 2: General and construction requirements
|
| IEC 60092-350-2001
| 船舶電氣設施 第350部分：船用電力電纜 一般結構和試驗要求
| Electrical installations in ships - Part 350: Shipboard power cables - General construction and test requirements
|
| IEC 60092-351-2004
| 船舶電氣設施.第351部分:船載和海上成套動力裝置、遠程通訊及控制數據電纜用絕緣材料
| Electrical installations in ships - Part 351: Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables
|
| IEC 60092-352-2005
| 船舶電氣設施.第352部分:電纜的選擇和敷設
| Electrical installations in ships - Part 352: Choice and installation of electrical cables
|
| IEC 60092-353 AMD 1-2001
| 船舶電氣設施 第353部分:額定電壓為1kV和3kV的擠壓固體絕緣單芯和多芯非徑向場電力電纜 修改1
| Electrical installations in ships - Part 353: Single and multicore non-radial field power cables with extruded solid insulation for rated voltages 1 kV and 3 kV; Amendment 1
|
| IEC 60092-353-1995
| 船舶電氣設施 第353部分:額定電壓為1kV和3kV的擠壓固體絕緣單芯和多芯非徑向場電力電纜
| Electrical installations in ships - Part 353: Single and multicore non-radial field power cables with extruded solid insulation for rated voltages 1 kV and 3 kV
|
| IEC 60092-354-2003
| 船舶電氣設施.第354部分:額定電壓為6至30kV的擠壓固體絕緣單芯和三芯電力電纜
| Electrical installations in ships - Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (U<(Index)m> = 7,2 kV) up to 30 kV (U<(Index)m> = 36 kV)
|
| IEC 60092-359 AMD 1 Corrigendum 1-1995
| 船舶電氣設施.第359部分:船用電力電纜和通信電纜用護套材料.修改件1
| Electrical installations in ships - Part 359: Sheathing materials for shipboard power and telecommunication cables; Amendment 1
|
| IEC 60092-359 AMD 1-1994
| 船舶電氣設施 第359部分:船用電力電纜和通信電纜用護套材料 修改1
| Electrical installations in ships - Part 359: Sheathing materials for shipboard power and telecommunication cables; Amendment 1
|
| IEC 60092-359 AMD 2-1999
| 船舶電氣設施 第359部分:船用電力電纜和通信電纜用護套材料 修改2
| Electrical installations in ships - Part 359: Sheathing materials for shipboard power and telecommunication cables; Amendment 2
|
| IEC 60092-359 Edition 1.2-1999
| 船上電氣安裝.第359部分:船上動力和通信電纜用鎧裝材料
| Electrical installations in ships - Part 359: Sheathing materials for shipboard power and telecommunication cables
|
| IEC 60092-359-1987
| 船舶電氣設施 第359部分:船用電力電纜和通信電纜用護套材料
| Electrical installations in ships. Part 359 : Sheathing materials for shipboard power and telecommunication cables
|
| IEC 60092-373-1977
| 船舶電氣設施 第373部分:船用通信電纜和射頻電纜 船用同軸電纜
| Electrical installations in ships. Part 373 : Shipboard telecommunication cables and radio-frequency cables. Shipboard coaxial cables
|
| IEC 60092-374-1977
| 船舶電氣設施 第374部分:船用通信電纜和射頻電纜 非重要通信業務用電纜
| Electrical installations in ships. Part 374 : Shipboard telecommunication cables and radio-frequency cables. Telephone cables for non-essential communication cables
|
| IEC 60092-375-1977
| 船舶電氣設施 第375部分:船用通信電纜和射頻電纜 一般儀器儀表、控制和通信電纜
| Electrical installations in ships. Part 375 : Shipboard telecommunication cables and readio-frequency cables. General instrumentation, control and communication cables
|
| IEC 60092-376-2003
| 船舶電氣設施.第376部分:控制和測量電路150/250V (300 V)用電纜
| Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V)
|
| IEC 60096-0-1 AMD 1-2000
| 射頻電纜 第0部分:詳細規范設計指南 第1節:同軸電纜 修改1
| Radio-frequency cables - Part 0: Guide to the design of detailed specifications; Section One: Coaxial cables; Amendment 1
|
| IEC 60096-0-1 Edition 2.1-2000
| 射頻電纜.第0部分:詳細規范制訂導則.第1章:同軸電纜
| Radio frequency cables - Part 0: Guide to the design of detail specifications; Section 1: Coaxial cables
|
| IEC 60096-0-1-1990
| 射頻電纜 第0部分:詳細規范設計指南 第1節:同軸電纜
| Radio-frequency cables; part 0: guide to the design of detail specifications; section 1: coaxial cables
|
| IEC 60096-1 AMD 2-1993
| 射頻電纜 第1部分:一般要求和測量方法 修改2
| Radio-frequency cables; Part 1: general requirements and measuring methods; amendment 2
|
| IEC 60096-1-1986
| 射頻電纜 第1部分:一般要求和測量方法
| Radio-frequency cables. Part 1 : General requirements and measuring methods
|
| IEC 60096-2 AMD 1-1990
| 射頻電纜 第2部分:相關電纜規范 修改1
| Radio-frequency cables; part 2: relevant cable specifications; amendment No. 1 to IEC 60096-2:1961
|
| IEC 60096-2 Corrigendum 1-1993
| 射頻電纜.第2部分:相關電纜規范
| Radio-frequency cables; part 2: relevant cable specifications
|
| IEC 60096-2 Corrigendum 2-1997
| 射頻電纜.第2部分:相關電纜規范
| Radio-frequency cables; part 2: relevant cable specifications
|
| IEC 60096-2-1988
| 射頻電纜 第2部分:相關電纜規范
| Radio-frequency cables; part 2: relevant cable specifications
|
| IEC 60096-3-1982
| 射頻電纜 第3部分:電纜分配系統用單同軸電纜的一般要求和試驗
| Radio-frequency cables. Part 3 : General requirements and tests for single-unit coaxial cables for use in cabled distribution systems
|
| IEC 60096-4-1-1990
| 射頻電纜 第4部分:超屏蔽電纜規范 第1節:一般要求和試驗方法
| Radio-frequency cables; part 4: specification for superscreened cables; section 1: general requirements and test methods
|
| IEC 60141-1 AMD 1-1995
| 充油電纜和壓氣電纜及其附件的試驗 第1部分:交流電壓400kV及以下的紙絕緣金屬護套充油電纜及其附件 修改1
| Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV; Amendment 1
|
| IEC 60141-1 AMD 2-1998
| 充油電纜和壓氣電纜及其附件的試驗 第1部分:交流電壓400kV及以下的紙絕緣金屬護套充油電纜及其附件 修改2
| Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV; Amendment 2
|
| IEC 60141-1-1993
| 充油電纜和壓氣電纜及其附件的試驗 第1部分:交流電壓400kV及以下的紙絕緣金屬護套充油電纜及其附件
| Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV
|
| IEC 60141-2 AMD 1-1967
| 充油電纜和壓氣電纜及其附件的試驗 第2部分:交流電壓275kV以下內壓氣電纜及其附件 修改1
| Test on oil-filled and gas-pressure cables and their accessories. Part 2 : Internal gas-pressure cables and accessories for alternating voltages up to 275 kV
|
| IEC 60141-2-1963
| 充油電纜和壓氣電纜及其附件的試驗 第2部分:交流電壓275kV以下內壓氣電纜及其附件
| Test on oil-filled and gas-pressure cables and their accessories. Part 2 : Internal gas-pressure cables and accessories for alternating voltages up to 275 kV
|
| IEC 60141-3 AMD 1-1967
| 充油電纜和壓氣電纜及其附件的試驗 第3部分:交流電壓275kV以下外壓氣(氣體壓縮)電纜及其附件 修改1
| Test on oil-filled and gas-pressure cables and their accessories. Part 3 : External gas-pressure (gas compression) cables and accessories alternating voltage up to 275 kV
|
| IEC 60141-3-1963
| 充油電纜和壓氣電纜及其附件的試驗 第3部分:交流電壓275kV以下外壓氣(氣體壓縮)電纜及其附件
| Test on oil-filled and gas-pressure cables and their accessories. Part 3 : External gas-pressure (gas compression) cables and accessories alternating voltage up to 275 kV
|
| IEC 60141-4 AMD 1-1990
| 充油電纜和壓氣電纜及其附件的試驗 第4部分:交流電壓400kV及以下油浸紙絕緣高壓力管式充油電纜及其附件 修
| Test on oil-filled and gas-pressure cables and their accessories; part 4: oil-impregnated paper-insulated high pressure oil-filled pipe-type cables and accessories for alternating voltages up to and including 400 kV; amendment 1 to IEC 60141-4:1980
|
| IEC 60141-4-1980
| 充油電纜和壓氣電纜及其附件的試驗 第4部分:交流電壓400kV及以下油浸紙絕緣高壓力管式充油電纜及其附件
| Test on oil-filled and gas-pressure cables and their accessories. Part 4 : Oil-impregnated paper-insulated high pressure oil-filled pipe-type cables and accessories for alternating voltages up to and including 400 kV
|
| IEC 60169-10 AMD 1-1986
| 射頻連接器 第10部分:外導體內徑為3mm(0.12 in)的卡鎖連接射頻同軸電纜連接器 特性阻抗50Ω(SMB型) 修改1
| Radio-frequency connectors. Part 10 : R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with snap-on coupling - Characteristic impedance 50 Ohms (Type SBM)
|
| IEC 60169-10 AMD 2-1996
| 射頻連接器 第10部分:外導體內徑為3mm(0.12 in)的卡鎖連接射頻同軸電纜連接器 特性阻抗50Ω(SMB型) 修改2
| Radio frequency connectors - Part 10: RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling - Characteristic impedance 50 ohms (type SMB); Amendment 2
|
| IEC 60169-10-1983
| 射頻連接器 第10部分:外導體內徑為3mm(0.12 in)的卡鎖連接射頻同軸電纜連接器 特性阻抗50Ω(SMB型)
| Radio-frequency connectors. Part 10 : R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with snap-on coupling - Characteristic impedance 50 Ohms (Type SBM)
|
| IEC 60169-22-1985
| 射頻連接器 第22部分:與雙芯屏蔽對稱電纜配用雙極卡口鎖緊射頻連接器(BNO型)
| Radio-frequency connectors. Part 22 : R.F. two-pole bayonet coupled connectors for use with shielded balanced cables having twin inner conductors (Type BNO)
|
| IEC 60169-23-1991
| 射頻連接器 第23部分:與3.5mm剛性精密同軸電纜配用外導體內徑3.5mm(0.1378 in)的插針插孔式射頻連接器
| Radio-frequency connectors, part 23: pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in)
|
| IEC 60169-24 Corrigendum 1-1995
| 射頻連接器.第24部分:典型用于75Ω電纜分配系統、螺紋連接射頻同軸連接器(F型)
| Radio-frequency connectors; part 24: radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F)
|
| IEC 60169-24-1991
| 射頻連接器 第24部分:典型用于75Ω電纜分配系統、螺紋連接射頻同軸連接器(F型)
| Radio-frequency connectors; part 24: radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F)
|
| IEC 60169-25-1992
| 射頻連接器 第25部分:與雙芯屏蔽對稱電纜配用、外導體內經為13.56mm(0.534 in)的雙極螺紋連接連接器(TWHN型
| Radio-frequency connectors; part 25: two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (type TWHN)
|
| IEC 60169-27-1994
| 射頻連接器 第27部分:典型用于75Ω電纜分配系統的螺紋連接射頻同軸連接器(E型)
| Radio-frequency connectors; part 27: radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohms cable distribution systems (type E)
|
| IEC 60169-5 Corrigendum 1-1971
| 射頻連接器.第5部分:電纜 96 IEC 60050-17及更大電纜用射頻同軸連接器
| Radio-frequency connectors. Part 5 : R.F. coaxial connectors for cables 96 IEC 60050-17 and larger
|
| IEC 60169-5-1970
| 射頻連接器 第5部分:電纜96 IEC 60050-17及更大電纜用射頻同軸連接器
| Radio-frequency connectors. Part 5 : R.F. coaxial connectors for cables 96 IEC 60050-17 and larger
|
| IEC 60169-6-1971
| 射頻連接器 第6部分:電纜96 IEC 60075-17及更大電纜用射頻同軸連接器
| Radio-frequency connectors. Part 6 : R.F. coaxial connectors for cables 96 IEC 60075-17 and larger
|
| IEC 60173-1964
| 軟電纜和軟電線線芯的顏色
| Colours of the cores of flexible cables and cords
|
| IEC 60183 AMD 1-1990
| 高壓電纜的選擇指南 修改1
| Guide to the selection of high-voltage cables; amendment 1 to IEC 60183:1984
|
| IEC 60183-1984
| 高壓電纜的選擇指南
| Guide to the selection of high-voltage cables
|
| IEC 60189-1 AMD 3-1992
| 聚氯乙烯絕緣和聚氯乙烯護套的低頻電纜和電線 第1部分:一般試驗和測量方法 修改3
| Low-frequency cables and wires with PVC insulation and PVC sheath; part 1: general test and measuring methods; amendment 3
|
| IEC 60189-1-1986
| 聚氯乙烯絕緣和聚氯乙烯護套的低頻電纜和電線 第1部分:一般試驗和測量方法
| Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 1 : General test and measuring methods
|
| IEC 60189-2 AMD 1-1989
| 聚氯乙烯絕緣和聚氯乙烯護套的低頻電纜和電線 第2部分:內部裝置用雙芯、三芯、四芯和五芯電纜 修改1
| Low-frequency cables and wires with PVC insulation and PVC sheath; part 2: cables in pairs, triples, quads and quintuples for inside installations; amendment No. 1 to IEC 60189-2:1981
|
| IEC 60189-2 AMD 2-1996
| 聚氯乙烯絕緣和聚氯乙烯護套的低頻電纜和電線 第2部分:內部安裝用雙芯、三芯、四芯和五芯電纜 修改2
| Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations; Amendment 2
|
| IEC 60189-2-1981
| 聚氯乙烯絕緣和聚氯乙烯護套的低頻電纜和電線 第2部分:內部安裝用雙芯、三芯、四芯和五芯電纜
| Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 2 : Cables in pairs, triples, quads and quintuples for inside installations
|
| IEC 60189-3 AMD 1-1989
| 聚氯乙烯絕緣和聚氯乙烯護套的低頻電纜和電線 第3部分:聚氯乙烯絕緣的單股、雙股、三股實心或絞合線 修改1
| Low-frequency cables and wires with PVC insulation and PVC sheath; part 3: equipment wires with solid or stranded conductor, PVC insulated, in singles, pairs and triples; amendment No. 1 to publication 60189-3:1988
|
| IEC 60189-3-1988
| 聚氯乙烯絕緣和聚氯乙烯護套的低頻電纜和電線 第3部分:聚氯乙烯絕緣的單股、雙股、三股實心或絞合線
| Low-frequency cables and wires with P.V.C. insulation and P.V.C. sheath. Part 3: Equipment wires with solid or stranded conductor, PVC insulated, in singles, pairs and triples
|
| IEC 60189-4 AMD 1-1989
| 聚氯乙烯絕緣和聚氯乙烯護套的低頻電纜和電線 第4部分:配電用聚氯乙烯絕緣的實心導體雙芯、三芯、四芯和五
| Low-frequency cables and wires with PVC insulation and PVC sheath; part 4: distribution wires with solid conductors, PVC insulated, in pairs, triples, quads and quintuples; amendment No. 1 to publication 60189-4:1980
|
| IEC 60189-4-1980
| 聚氯乙烯絕緣和聚氯乙烯護套的低頻電纜和電線 第4部分:配電用聚氯乙烯絕緣的實心導體雙芯、三芯、四芯和五
| Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 4 : Distribution wires with solid conductors, p.v.c. insulated, in pairs, triples, quads and quintuples
|
| IEC 60189-5 AMD 2-1992
| 聚氯乙烯絕緣和聚氯乙烯護套的低頻電纜和電線 第5部分:聚氯乙烯絕緣的實心或絞合導體單芯或雙芯設備用電線
| Low-frequency cables and wires with PVC insulation and PVC sheath; part 5: equipment wires and cables with solid or stranded conductors, PVC insulated, screened, single or one pair; amendment 2
|
| IEC 60189-5-1980
| 聚氯乙烯絕緣和聚氯乙烯護套的低頻電纜和電線 第5部分:聚氯乙烯絕緣的實心或絞合導體單芯或雙芯設備用電線
| Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 5 : Equipment wires and cables with solid or stranded conductors, p.v.c. insulated, screened, single or one pair
|
| IEC 60189-6 AMD 1-1989
| 聚氯乙烯絕緣和聚氯乙烯護套的低頻電纜和電線 第6部分:電信設備和設施用單芯信號電纜 修改1
| Low-frequency cables and wires with PVC insulation and PVC sheath; part 6: signalling cables in singles for telecommunication equipment and installation; amendment 1 to IEC 60189-6:1982
|
| IEC 60189-6-1982
| 聚氯乙烯絕緣和聚氯乙烯護套的低頻電纜和電線 第6部分:電信設備和設施用單芯信號電纜
| Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 6 : Signalling cables in singles for telecommunication equipment and installation
|
| IEC 60189-7 AMD 1-1989
| 聚氯乙烯絕緣和聚氯乙烯護套的低頻電纜和電線 第7部分:聚氯乙烯絕緣、聚酰胺涂覆的實心導體單芯、雙芯、三
| Low-frequency cables and wires with PVC insulation and PVC sheath; part 7: distribution wires with solid conductors, PVC insulated, polyamide coated, in singles, pairs, triples, quads and quintuples; amendment No. 1 to publication 60189-7:1982
|
| IEC 60189-7-1982
| 聚氯乙烯絕緣和聚氯乙烯護套的低頻電纜和電線 第7部分:聚氯乙烯絕緣、聚酰胺涂覆的實心導體單芯、雙芯、三
| Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 7 : Distribution wires with solid conductors, p.v.c. insulated, polyamide coated, in singles, pairs, triples, quads or quintuples
|
| IEC 60227-1 AMD 1-1995
| 額定電壓450/750V及以下聚氯乙烯絕緣電纜 第1部分:一般要求 修改1
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements; Amendment 1
|
| IEC 60227-1 AMD 2-1998
| 額定電壓450/750V及以下聚氯乙烯絕緣電纜 第1部分:一般要求 修改2
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements; Amendment 2
|
| IEC 60227-1 Edition 2.2-1998
| 額定電壓450/750V及以下的聚氯乙烯絕緣電纜.第1部分:一般要求
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
|
| IEC 60227-1-1993
| 額定電壓450/750V及以下聚氯乙烯絕緣電纜 第1部分:一般要求
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V; part 1: general requirements
|
| IEC 60227-2 AMD 1-2003
| 額定電壓450/750V及以下的聚氯乙烯絕緣電纜.第2部分:試驗方法.修改件1
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods; Amendment 1
|
| IEC 60227-2 Corrigendum 1-1998
| 額定電壓450/750V及以下的聚氯乙烯絕緣電纜.第2部分:試驗方法
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
|
| IEC 60227-2 Edition 2.1-2003
| 額定電壓450/750V及以下的聚氯乙烯絕緣電纜.第2部分:試驗方法
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
|
| IEC 60227-2-1997
| 額定電壓450/750V及以下聚氯乙烯絕緣電纜 第2部分:試驗方法
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
|
| IEC 60227-3 AMD 1-1997
| 額定電壓450/750V及以下聚氯乙烯絕緣電纜 第3部分:固定布線用的無護套電纜 修改1
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring; Amendment 1
|
| IEC 60227-3 Edition 2.1-1997
| 額定電壓450/750V及以下的聚氯乙烯絕緣電纜.第3部分:固定布線用無護套電纜
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring
|
| IEC 60227-4 AMD 1-1997
| 額定電壓450/750V及以下聚氯乙烯絕緣電纜 第4部分:固定布線用的護套電纜 修改1
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring; Amendment 1
|
| IEC 60227-4 Edition 2.1-1997
| 額定電壓450/750V及以下的聚氯乙烯絕緣電纜.第4部分:固定布線用護套電纜
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring
|
| IEC 60227-4-1992
| 額定電壓450/750V及以下聚氯乙烯絕緣電纜 第4部分:固定布線用的護套電纜
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V; part 4: sheathed cables for fixed wiring
|
| IEC 60227-5 AMD 1-1997
| 額定電壓450/750V及以下聚氯乙烯絕緣電纜 第5部分:軟電纜(軟線) 修改1
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords); Amendment 1
|
| IEC 60227-5 AMD 2-2003
| 額定電壓為450/750V及以下的聚氯乙烯絕緣電纜.第5部分:軟電纜(軟線).修改件2
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords); Amendment 2
|
| IEC 60227-5 Edition 2.1-1998
| 額定電壓450/750V及以下的聚氯乙烯絕緣電纜.第5部分:軟電纜(軟線)
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)
|
| IEC 60227-5 Edition 2.2-2003
| 額定電壓450/750V及以下聚氯乙烯絕緣電纜.第5部分:軟電纜(軟線)
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)
|
| IEC 60227-5-1997
| 額定電壓450/750V及以下聚氯乙烯絕緣電纜 第5部分:軟電纜(軟線)
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)
|
| IEC 60227-6-2001
| 額定電壓450/750V及以下聚氯乙烯絕緣電纜和軟連接用電纜
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 6: Lift cables and cables for flexible connections
|
| IEC 60227-7 AMD 1-2003
| 額定電壓450/750V及以下的聚氯乙烯絕緣電纜.第7部分:2芯或多芯屏蔽和非屏蔽軟電纜.修改件1
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors; Amendment 1
|
| IEC 60227-7 Edition 1.1-2003
| 額定電壓450/750V及以下的聚氯乙烯絕緣電纜.第7部分:屏蔽及未屏蔽的兩芯或多芯撓性電纜
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors
|
| IEC 60227-7-1995
| 額定電壓450/750V及以下聚氯乙烯絕緣電纜 第7部分:2芯或多芯屏蔽和非屏蔽軟電纜
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors
|
| IEC 60228-2004
| 絕緣電纜的導線
| Conductors of insulated cables
|
| IEC 60229-1982
| 具有特殊保護作用的、用擠壓成型的電纜外護套的試驗
| Tests on cable oversheaths which have a special protective function and are applied by extrusion
|
| IEC 60230-1966
| 電纜及其附件的沖擊電壓試驗
| Impulse tests on cables and their accessories
|
| IEC 60245-1-2003
| 橡皮絕緣電纜.額定電壓450/750V及以下.第1部分:一般要求
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
|
| IEC 60245-2 AMD 1-1997
| 橡皮絕緣電纜 額定電壓450/750V及以下 第2部分:試驗方法 修改1
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods; Amendment 1
|
| IEC 60245-2 AMD 2-1997
| 橡皮絕緣電纜 額定電壓450/750V及以下 第2部分:試驗方法 修改2
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods; Amendment 2
|
| IEC 60245-2 Edition 2.2-1998
| 額定電壓450/750V及以下的橡皮絕緣電纜.第2部分:試驗方法
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
|
| IEC 60245-2-1994
| 橡皮絕緣電纜 額定電壓450/750V及以下 第2部分:試驗方法
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
|
| IEC 60245-3 AMD 1-1997
| 橡皮絕緣電纜 額定電壓450/750V及以下 第3部分:耐熱硅絕緣電纜 修改1
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables; Amendment 1
|
| IEC 60245-3-1994
| 橡皮絕緣電纜 額定電壓450/750V及以下 第3部分:耐熱硅絕緣電纜
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables
|
| IEC 60245-4 AMD 1-1997
| 橡皮絕緣電纜 額定電壓450/750V及以下 第4部分:軟線和軟電纜 修改1
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables; Amendment 1
|
| IEC 60245-4 AMD 2-2003
| 橡皮絕緣電纜.額定電壓450/750V及以下.第4部分:軟線和軟電纜.修改件2
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables; Amendment 2
|
| IEC 60245-4 Edition 2.2-2004
| 橡皮絕緣電纜.額定電壓450/750V及以下.第4部分:軟線和軟電纜
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables
|
| IEC 60245-4-1994
| 橡皮絕緣電纜 額定電壓450/750V及以下 第4部分:軟線和軟電纜
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables
|
| IEC 60245-5 AMD 1-2003
| 橡皮絕緣電纜.額定電壓450/750V及以下.第5部分:電梯電纜.修改件1
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables; Amendment 1
|
| IEC 60245-5-1994
| 橡皮絕緣電纜 額定電壓450/750V及以下 第5部分:電梯電纜
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables
|
| IEC 60245-6 AMD 1-1997
| 橡皮絕緣電纜 額定電壓450/750V及以下 第6部分:弧焊電極電纜 修改1
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables; Amendment 1
|
| IEC 60245-6 AMD 2-2003
| 橡皮絕緣電纜.額定電壓450/750V及以下.第6部分:弧焊電極電纜.修改件2
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables; Amendment 2
|
| IEC 60245-6-1994
| 橡皮絕緣電纜 額定電壓450/750V及以下 第6部分:弧焊電極電纜
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables
|
| IEC 60245-7 AMD 1-1997
| 橡皮絕緣電纜 額定電壓450/750V及以下 第7部分:耐熱乙烯-乙酸乙烯酯橡皮絕緣電纜 修改1
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables; Amendment 1
|
| IEC 60245-7-1994
| 橡皮絕緣電纜 額定電壓450/750V及以下 第7部分:耐熱乙烯-乙酸乙烯酯橡皮絕緣電纜
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables
|
| IEC 60245-8 AMD 1-2003
| 橡皮絕緣電纜.額定電壓450/750V及以下.第8部分:應用于需要高柔性的軟線.修改件1
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility; Amendment 1
|
| IEC 60245-8 Edition 1.1-2004
| 橡皮絕緣電纜.額定電壓450/750V及以下.第8部分:要求高柔性的設備用軟線
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility
|
| IEC 60245-8-1998
| 橡皮絕緣電纜 額定電壓450/750V及以下 第8部分:應用于需要高柔性時的軟線
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility
|
| IEC 60287-1-1 AMD 1-1995
| 電纜 電流定額的計算 第1部分:電流定額公式(100%負載系數)和損耗計算 第1節:總則 修改1
| Electric cables - Calculation of the current rating - Part 1: Current rating equations (100% load factor) and calculation of losses - Section 1: General; Amendment 1
|
| IEC 60287-1-1 AMD 2-2001
| 電纜 電流定額的計算 第1部分:電流定額公式(100%負載因數)和損耗計算 第1節:總則 修改2
| Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100% load factor) and calculation of losses; General; Amendment 2
|
| IEC 60287-1-1 Edition 1.2-2001
| 電纜.額定電流的計算.第1-1部分:額定電流方程(100%負載系數)和電損耗計算.總則
| Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100% load factor) and calculation of losses; General
|
| IEC 60287-1-1-1994
| 電纜 電流定額的計算 第1部分:電流定額公式(100%負載因數)和損耗計算 第1節:總則
| Electric cables - Calculation of the current rating - Part 1: Current rating equations (100% load factor) and calculation of losses; section 1: General
|
| IEC 60287-1-2-1993
| 電纜 電流定額的計算 第1部分:電流定額公式(100%負載因數)和損耗計算 第2節:雙回路本行敷設護套渦流損耗因
| Electric cables; calculation of the current rating; part 1: current rating equations (100% load factor) and calculation of losses; section 2: sheath eddy current loss factors for two circuits in flat formation
|
| IEC 60287-1-3-2002
| 電纜.額定電流的計算.第1-3部分:額定電流方程式(負荷率100%)和損失率的計算.并聯單心電纜間電流共享和循環
| Electric cables - Calculation of the current rating - Part 1-3: Current rating equations (100 % load factor) and calculation of losses; Current sharing between parallel single-core cables and calculation of circulating current losses
|
| IEC 60287-2-1 AMD 1-2001
| 電纜 電流定額的計算 第2部分:熱阻 第1節:熱阻計算 修改1
| Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance; Calculation of thermal resistance; Amendment 1
|
| IEC 60287-2-1 AMD 2-2006
| 電纜.電流額定值的計算.第2-1部分:熱阻.熱阻的計算.修改件2
| Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance; Amendment 2
|
| IEC 60287-2-1 Edition 1.2-2006
| 電纜.額定電流的計算.第2-1部分:熱阻.熱阻計算
| Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance
|
| IEC 60287-2-1-1994
| 電纜 電流定額的計算 第2部分:熱阻 第1節:熱阻計算
| Electric cables - Calculation of the current rating - Part 2: Thermal resistance; section 1: Calculation of thermal resistance
|
| IEC 60287-2-2-1995
| 電纜 電流定額的計算 第2部分:熱阻 第2節:在室外敷防受陽光照射的電纜群的縮減因數的計算方法
| Electric cables - Calculation of the current rating - Part 2: Thermal resistance - Section 2: A method for calculating reduction factors for groups of cables in free air, protected from solar radiation
|
| IEC 60287-3-1 AMD 1-1999
| 電纜 電流定額的計算 第3部分:運行條件的章節 第1節:基準運行條件和電纜類型的選擇 修改1
| Electric cables - Calculation of the current rating - Part 3-1: Sections on operating conditions - Reference operating conditions and selection of cable type; Amendment 1
|
| IEC 60287-3-1 Edition 1.1-1999
| 電纜.電流額定的計算.第3部分:操作條件的選擇.參考操作條件和電纜類型的選擇
| Electric cables - Calculation of the current rating - Part 3-1: Sections on operating conditions - Reference operating conditions and selection of cable type
|
| IEC 60287-3-1-1995
| 電纜 電流定額的計算 第3部分:運行條件的章節 第1節:基準運行條件和電纜類型的選擇
| Electric cables - Calculation of the current rating - Part 3: Sections on operating conditions - Section 1: Reference operating conditions and selection of cable type
|
| IEC 60287-3-2 AMD 1-1996
| 電纜 電流定額的計算 第3部分:運行條件的章節 第2節:電力電纜尺寸最佳經濟選擇 修改1
| Electric cables - Calculation of the current rating - Part 3: Sections on operating conditions - Section 2: Economic optimization of power cable size; Amendment 1
|
| IEC 60287-3-2-1995
| 電纜 電流定額的計算 第3部分:運行條件的章節 第2節:電力電纜尺寸最佳經濟選擇
| Electric cables - Calculation of the current rating - Part 3: Sections on operating conditions - Section 2: Economic optimization of power cable size
|
| IEC 60304-1982
| 低頻電纜和電線用絕緣的標準顏色
| Standard colours for insulation for low-frequency cables and wires
|
| IEC 60331-11-1999
| 著火條件下電纜的試驗.電路完整性.第11部分:儀器.火焰溫度至少750℃條件下的單獨燃燒
| Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C
|
| IEC 60331-12-2002
| 著火條件下電纜的試驗.電路完整性.第12部分:儀器.至少在830鳦條件下沖擊燃燒
| Tests for electric cables under fire conditions - Circuit integrity - Part 12: Apparatus; Fire with shock at a temperature of at least 830 °C
|
| IEC 60331-21-1999
| 著火條件下電纜的試驗 電路完整性 第21部分:程序和要求 額定電壓0.6/1.0kV及以下的電纜
| Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV
|
| IEC 60331-23-1999
| 著火條件下電纜的試驗 電路完整性 第23部分:程序和要求 電數據電纜
| Tests for electric cables under fire conditions - Circuit integrity - Part 23: Procedures and requirements - Electric data cables
|
| IEC 60331-25-1999
| 著火條件下電纜的試驗 電路完整性 第25部分:程序和要求 光纜
| Tests for electric cables under fire conditions - Circuit integrity - Part 25: Procedures and requirements - Optical fibre cables
|
| IEC 60331-31-2002
| 著火條件下電纜的試驗.電路完整性.第31部分:沖擊著火的程序和要求.額定電壓高達(和包括)0,6/1,0 KV的電纜
| Tests for electric cables under fire conditions - Circuit integrity - Part 31: Procedures and requirements for fire with shock; Cables of rated voltage up to and including 0,6/1,0 kV
|
| IEC 60332-1-1-2004
| 著火條件下電纜和光纜的試驗.第1-1部分:單根絕緣電線或電纜垂直火焰蔓延的試驗.裝置
| Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
|
| IEC 60332-1-2-2004
| 著火條件下電纜和光纜的試驗.第1-2部分:單根絕緣電線或電纜垂直火焰蔓延的試驗.1kW預混合火焰規程
| Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
|
| IEC 60332-1-3-2004
| 著火條件下電纜和光纜的試驗.第1-3部分:單根絕緣電線或電纜垂直火焰蔓延的試驗.火焰熔滴/顆粒測定規程
| Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles
|
| IEC 60332-2-1-2004
| 著火條件下電纜和光纜的試驗.第2-1部分:單根小型絕緣電線或電纜的垂直火焰蔓延試驗.裝置
| Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus
|
| IEC 60332-2-2-2004
| 著火條件下電纜和光纜的試驗.第2-2部分:單根小型絕緣電線或電纜的垂直火焰蔓延試驗.擴散火焰規程
| Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame
|
| IEC 60332-3-10-2000
| 著火條件下電纜的試驗 第3-10部分:垂直安裝的成束電線或電纜的垂直火焰蔓延的試驗 儀器
| Tests on electric cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunches wires or cables; Apparatus
|
| IEC 60332-3-21-2000
| 著火條件下電纜的試驗 第3-21部分:垂直安裝的成束電線或電纜的垂直火焰蔓延的試驗 種類A F/R
| Tests on electric cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables; Category A F/R
|
| IEC 60332-3-22-2000
| 著火條件下電纜的試驗 第3-22部分:垂直安裝的成束電線或電纜的垂直火焰蔓延的試驗 種類A
| Tests on electric cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables; Category A
|
| IEC 60332-3-23-2000
| 著火條件下電纜的試驗 第3-23部分:垂直安裝的成束電線或電纜的垂直火焰蔓延的試驗 種類B
| Tests on electric cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables; Category B
|
| IEC 60332-3-24-2000
| 著火條件下電纜的試驗 第3-24部分:垂直安裝的成束電線或電纜的垂直火焰蔓延的試驗 種類C
| Tests on electric cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables; Category C
|
| IEC 60332-3-25-2000
| 著火條件下電纜的試驗 第3-25部分:垂直安裝的成束電線或電纜的垂直火焰蔓延的試驗 種類D
| Tests on electric cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables; Category D
|
| IEC 60344 AMD 1-1985
| 低頻電纜和電線的無鍍層和有鍍層銅導體電阻的計算指南 修改1
| Guide to the calculation of resistance of plain and coated copper conductors of low-frequency cables and wires
|
| IEC 60344-1980
| 低頻電纜和電線的無鍍層和有鍍層銅導體電阻的計算指南
| Guide to the calculation of resistance of plain and coated copper conductors of low-frequency cables and wires
|
| IEC 60371-3-8 Corrigendum 1-1995
| 以云母為基材的絕緣材料.第3部分:單項材料規范.活頁8:阻燃安全電纜用云母紙帶
| Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables
|
| IEC 60371-3-8-1995
| 以云母為基材的絕緣材料 第3部分:單項材料規范 活頁8:阻燃安全電纜用云母紙帶
| Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables
|
| IEC 60439-5 Edition 1.1-1998
| 低壓開關設備和控制設備組件.第5部分:公共場所室外安裝的組件的特殊要求.網絡電力配電用電纜分配箱
| Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCs) for power distribution in networks
|
| IEC 60465-1988
| 充油電纜用的未使用過的絕緣礦物油規范
| Specification for unused insulating mineral oils for cables with oil ducts
|
| IEC 60502-1-2004
| 額定電壓1～30kV擠壓絕緣電力電纜及其附件.第1部分:額定電壓1kV(Um=1.2kV)和3kV(Um=3.6kV)的電纜
| Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U<(Index)m> = 1,2 kV) up to 30 kV (U<(Index)m> = 36 kV) - Part 1: Cables for rated voltages of 1 kV (U<(Index)m> = 1,2 kV) and 3 kV (U<(Index)m> = 3,6 kV)
|
| IEC 60502-2-2005
| 額定電壓從1kV(Um=1.2kV)到30kV(Um=36kV)的擠壓絕緣電力電纜及其附件.第2部分:額定電壓從6kV(Um=7.2kV)到30
| Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U<(Index)m> = 1,2 kV) up to 30 kV (U<(Index)m> = 36 kV) - Part 2: Cables for rated voltages from 6 kV (U<(Index)m> = 7,2 kV) up to 30 kV (U<(Index)m> = 36 kV)
|
| IEC 60502-4-2005
| 額定電壓從1kV(Um=1.2kV)到30kV(Um=36kV)的擠壓絕緣電力電纜及其附件.第4部分:額定電壓從6kV(Um=7.2kV)到30
| Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U<(Index)m> = 1,2 kV) up to 30 kV (U<(Index)m> = 36 kV) - Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (U<(Index)m> = 7,2 kV) up to 30 kV (U<(Index)m> = 36 kV)
|
| IEC 60526-1978
| 醫用X射線設備高壓電纜插頭插座的連接
| High-voltage cable plug and socket connections for medical X-ray equipment
|
| IEC 60584-3-1989
| 熱電偶 第3部分:延長電纜和補償電纜 允差和識別系統
| Thermocouples; part 3: extension and compensating cables; tolerances and identification system
|
| IEC 60603-9-1990
| 印制板用頻率低于3MHz的連接器 第9部分:基本網格為2.54 mm (0.1 in)的印制板、底板和電纜連接器用兩件式連
| Connectors for frequencies below 3 MHz for use with printed boards; part 9: two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in)
|
| IEC 60702-1-2002
| 額定電壓不超過750V的礦物絕緣電纜及其終端.第1部分:電纜
| Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables
|
| IEC 60702-2-2002
| 額定電壓不超過750V的礦物絕緣電纜及其終端.第2部分:終端
| Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations
|
| IEC 60708-2005
| 聚烯烴絕緣和隔潮層聚烯烴護套低頻電纜
| Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath
|
| IEC 60719-1992
| 額定電壓450/750V及以下圓形銅導線電纜的平均外形尺寸上、下限值的計算
| Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V
|
| IEC 60724-2000
| 額定電壓為1kV(Um=1.2kV)和3kV(Um=3.6kV)的電纜的短路溫度極限
| Short-circuit temperature limits of electric cables with a rated voltage of 1 kV (U<(Index)m> = 1,2 kV) and 3 kV (U<(Index)m> = 3,6 kV)
|
| IEC 60728-1-2001
| 電視和聲音信號電纜分配系統 第1部分：測量方法和系統性能
| Cabled distribution systems for television and sound signals - Part 1: Methods of measurement and system performance
|
| IEC 60728-10-2005
| 電視信號、聲音信號和交互服務用電纜網絡.第10部分:回波路徑的系統性能
| Cable networks for television signals, sound signals and interactive services - Part 10: System performance of return path
|
| IEC 60728-11-2005
| 電視信號、聲音信號和交互式服務用電纜網絡.第11部分:安全
| Cable networks for television signals, sound signals and interactive services - Part 11: Safety
|
| IEC 60728-12-2001
| 電視和聲音信號用電纜分配系統 第12部分：系統的電磁兼容性
| Cabled distribution systems for television and sound signals - Part 12: Electromagnetic compatibility of systems
|
| IEC 60728-2-2002
| 電視和聲音信號用電纜分配系統.第2部分:設備的電磁兼容性
| Cabled distribution systems for television and sound signals - Part 2: Electromagnetic compatibility for equipment
|
| IEC 60728-3-2005
| 電視信號、聲音信號和交互設備用電纜網絡.第3部分:同軸電纜網絡用有源寬帶設備
| Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for coaxial cable network
|
| IEC 60728-4-2000
| 電視和聲音信號用電纜分配系統 第4部分:無源同軸寬帶分配設備
| Cabled distribution systems for television and sound signals - Part 4: Passive coaxial wideband distribution equipment
|
| IEC 60728-5-2001
| 電視和聲音信號用電纜分配系統 第5部分：前端設備
| Cabled distribution systems for television and sound signals - Part 5: Headend equipment
|
| IEC 60728-6-2003
| 電視和聲音信號及交互服務用電纜網絡.第6部分:光學設備
| Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment
|
| IEC 60728-7-1-2003
| 電視信號、聲音信號和交互信號設備用電纜網絡.第7-1部分:混合光纖同軸電纜外部線纜狀況監測.物理層規范
| Cable networks for television signals, sound signals and interactive services - Part 7-1: Hybrid Fibre Coax Outside Plant Status Monitoring; Physical (PHY) layer specification
|
| IEC 60728-7-2-2003
| 電視信號、聲音信號和交互信號設備用電纜網絡.第7-2部分:混合光纖同軸電纜外部線纜狀況監測.媒體訪問控制層
| Cable networks for television signals, sound signals and interactive services - Part 7-2: Hybrid Fibre Coax Outside Plant Status Monitoring; Media access control (MAC) layer specification
|
| IEC 60728-7-3-2003
| 電視信號、聲音信號和交互信號設備用電纜網絡.第7-3部分:混合光纖同軸電纜外部線纜狀況監測.電力轉發器接口
| Cable networks for television signals, sound signals and interactive services - Part 7-3: Hybrid Fibre Coax Outside Plant Status Monitoring; Power supply to transponder interface bus (PSTIB) specification
|
| IEC 60728-9 AMD 1-2005
| 電視和聲音信號用電纜分配系統.第9部分:數字調制信號用電纜分配系統的接口.修改件1
| Cabled distribution systems for television and sound signals - Part 9: Interfaces of cabled distribution systems for digitally modulated signals; Amendment 1
|
| IEC 60728-9-2000
| 電視和聲音信號用電纜分配系統 第9部分:數字調制信號用電纜分配系統的接口
| Cabled distribution systems for television and sound signals - Part 9: Interfaces of cabled distribution systems for digitally modulated signals
|
| IEC 60754-1-1994
| 電纜燃燒時釋出的氣體的試驗 第1部分:氫鹵酸氣體量的測定
| Test on gases evolved during combustion of materials from cables; part 1: determination of the amount of halogen acid gas
|
| IEC 60754-2 AMD 1-1997
| 電纜燃燒時釋出的氣體的試驗 第2部分:通過測量pH值和電導率來測定在取自電纜的材料燃燒時釋出的氣體的酸度
| Test on gases evolved during combustion of electric cables - Part 2: Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity; Amendment 1
|
| IEC 60754-2-1991
| 電纜燃燒時釋出的氣體的試驗 第2部分:通過測量pH值和電導率來測定在取自電纜的材料燃燒時釋出的氣體的酸度
| Test on gases evolved during combustion of electric cables; part 2: determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity
|
| IEC 60794-1-2-2003
| 光學纖維電纜.第1-2部分:總規范.基礎光纜試驗規程
| Optical fibre cables - Part 1-2: Generic specification; Basic optical cable test procedures
|
| IEC 60794-2-10-2003
| 光纖電纜.第2-10部分:室內光纜.單股光纜和雙股光纜的類規范
| Optical fibre cables - Part 2-10: Indoor optical fibre cables; Family specification for simplex and duplex cables
|
| IEC 60794-2-11-2005
| 光纜.第2-11部分:室內電纜.房屋布線用單工和雙工光纜的詳細規范
| Optical fibre cables - Part 2-11: Indoor cables - Detailed specification for simplex and duplex cables for use in premises cabling
|
| IEC 60794-2-20-2003
| 光纖電纜.第2-20部分:室內光纜.多纖配電光纜的類規范
| Optical fibre cables - Part 2-20: Indoor cables; Family specification for multi-fibre optical distribution cables
|
| IEC 60794-2-21-2005
| 光纜.第2-21部分:室內電纜.房屋布線用多纖配電光纜的詳細規范
| Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling
|
| IEC 60794-2-30-2003
| 光纖電纜.第2-30部分:室內光纜.光纖帶狀電纜類規范
| Optical fibre cables - Part 2-30: Indoor optical fibrea cables; Family specification for optical fibre ribbon cables
|
| IEC 60794-2-31-2005
| 光纜.第2-31部分:室內電纜.房屋布線用帶狀光纜的詳細規范
| Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling
|
| IEC 60794-2-40 Corrigendum 1-2005
| 勘誤1.光纜.第2-40部分:室內光纜.含A4緩沖層包覆光纖的單工和雙工電纜的類規范
| Corrigendum 1 - Optical fibre cables - Part 2-40: Indoor cables - Family specification for simplex and duplex cables with buffered A4 fibres
|
| IEC 60794-3-10-2002
| 光學纖維電纜.第3-10部分:戶外電纜.管道光纜和直埋通信光纜的系列規范
| Optical fibre cables - Part 3-10: Outdoor cables; Family specification for duct and directly buried optical telecommunication cables
|
| IEC 60794-3-12-2005
| 光纜.第3-12部分:室外電纜.房屋布線用管道和直埋通信光纜的詳細規范
| Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling
|
| IEC 60794-3-20-2002
| 光纜.第3-20部分:戶外電纜.自立式架空光通信電纜的系列規范
| Optical fibre cables - Part 3-20: Outdoor cables; Family specification for optical self-supporting aerial telecommunication cables
|
| IEC 60794-3-2001
| 光纜 第3部分：分規范 戶外電纜
| Optical fibre cables - Part 3: Sectional specification; Outdoor cables
|
| IEC 60794-3-21-2005
| 光纜.第3-21部分:室外電纜.房屋布線用自立式架空通信光纜的詳細規范
| Optical fibre cables - Part 3-21: Outdoor cables - Detailed specification for optical self-supporting aerial telecommunication cables for use in premises cabling
|
| IEC 60800-1992
| 額定電壓300/500V舒適加熱和防結冰用加熱電纜
| Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation
|
| IEC 60803 AMD 1-1995
| 射頻電纜和連接器用六邊形和方形壓接模型腔、壓錐、標準規、外導體壓接套和中心接觸壓接圓筒的推薦尺寸 修
| Recommended dimensions for hexagonal and square crimping-die cavities, indentors, gauges, outer conductor crimp sleeves and centre contact crimp barrels for r.f. cables and connectors; Amendment 1
|
| IEC 60803-1984
| 射頻電纜和連接器用六邊形和方形壓接模型腔、壓錐、標準規、外導體壓接套和中心接觸壓接圓筒的推薦尺寸
| Recommended dimensions for hexagonal and square crimping-die cavities, indentors, gauges, outer conductor crimp sleeves and centre contact crimp barrels for r.f. cables and connectors
|
| IEC 60807-8-1992
| 頻率低于3MHz的矩形連接器 第8部分:具有4個信號接觸件和電纜屏蔽用接地接觸件的連接器詳細規范
| Rectangular connectors for frequencies below 3 MHz; part 8: detail specification for connectors, four-signal contacts and earthing contacts for cable screen
|
| IEC 60811-1-1 AMD 1-2001
| 電纜絕緣和護套材料的通用試驗方法 第1部分:一般使用的方法 第1節:厚度和外形尺寸的測量 機械性能測定試驗
| Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-1: Methods for general application; Measurement of thickness and overall dimensions; Tests for determining the mechanical properties; Amendment 1
|
| IEC 60811-1-1 Edition 2.1-2001
| 電纜和光纜的絕緣和護套材料通用試驗方法.第1-1部分:一般應用方法.厚度和總尺寸的測量.機械性能測定試驗
| Common test methods for insulating and sheathing materials of electric cables and optical cables - Part 1-1: Methods for general application; Measurement of thickness and overall dimensions; Tests for determining the mechanical properties
|
| IEC 60811-1-1-1993
| 電纜絕緣和護套材料的通用試驗方法 第1部分:一般使用的方法 第1節:厚度和外形尺寸的測量 機械性能測定試驗
| Common test methods for insulating and sheathing materials of electric cables; part 1: methods for general application; section 1: measurement of thickness and overall dimensions; tests for determining the mechanical properties
|
| IEC 60811-1-2 AMD 1-1989
| 電纜絕緣和護套材料的通用試驗方法 第1部分:一般使用的方法 第2節:熱老化方法 修改1
| Common test methods for insulating and sheathing materials of electric cables; part 1: methods for general application; section two: thermal ageing methods; amendment No. 1 to IEC 60811-1-2:1985
|
| IEC 60811-1-2 AMD 2-2000
| 電纜和光纜用絕緣和護套材料的通用試驗方法 第1部分:一般使用的方法 第2節:熱老化方法 修改2
| Common tests methods for insulating and sheathing materials of electric and optical cables - Part 1-2: Methods for general application; Thermal ageing methods; Amendment 2
|
| IEC 60811-1-2 Corrigendum 1-1986
| 電纜用絕緣和護套材料的通用試驗方法.第1部分:一般使用的方法.第2節:熱老化方法.勘誤1
| Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section 2: Thermal ageing methods; Corrigendum 1
|
| IEC 60811-1-2-1985
| 電纜絕緣和護套材料的通用試驗方法 第1部分:一般使用的方法 第2節:熱老化方法
| Common test methods for insulating and sheathing materials of electric cables; part 1: methods for general application; section two: thermal ageing methods
|
| IEC 60811-1-3 AMD 1-2001
| 電纜用絕緣和護套材料 通用試驗方法 第1部分:一般使用的方法 第3節:密度測定方法 吸水試驗 收縮試驗
| Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-3: General application - Methods for determining the density; Water absorption tests; Shrinkage test; Amendment 1
|
| IEC 60811-1-3 Edition 2.1-2001
| 電纜和光纜的絕緣和護套材料通用試驗方法.第1-3部分:一般應用.密度測定方法.吸水試驗.收縮試驗
| Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-3: General application; Methods for determining the density; Water absorption tests; Shrinkage test
|
| IEC 60811-1-3-1993
| 電纜絕緣和護套材料通用試驗方法.第1部分:一般應用方法.第3節:密度測定方法.吸水試驗.收縮試驗
| Insulating and sheathing materials of electric cables; common test methods; part 1: general application; section 3: methods for determining the density; water absorption tests; shrinkage test
|
| IEC 60811-1-4 AMD 1-1993
| 電纜絕緣和護套材料的通用試驗方法 第1部分:一般使用的方法 第4節:低溫試驗 修改1
| Common test methods for insulating and sheathing materials of electric cables; part 1: methods for general application; section 4: test at low temperature; amendment 1
|
| IEC 60811-1-4 AMD 2-2001
| 電纜絕緣和護套材料的通用試驗方法 第1部分:一般使用的方法 第4節:低溫試驗 修改2
| Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-4: Methods for general application; Test at low temperature; Amendment 2
|
| IEC 60811-1-4 Corrigendum 1-1986
| 電纜絕緣和護套材料的通用試驗方法.第1部分:一般使用的方法.第4節:低溫試驗.勘誤1
| Common test methods for insulating and sheathing materials of electric cables - Part 1 : Methods for general application - Section 4: Tests at low temperature; Corrigendum 1
|
| IEC 60811-1-4-1985
| 電纜絕緣和護套材料的通用試驗方法 第1部分:一般使用的方法 第4節:低溫試驗
| Common test methods for insulating and sheathing materials of electric cables. Part 1 : Methods for general application. Section Four - Tests at low temperature
|
| IEC 60811-2-1 AMD 1-2001
| 電纜和光纜用絕緣和護套材料 通用試驗方法 第2-1部分:彈性化合物專用方法 耐臭氧試驗、熱凝固試驗和礦物
| Common test methods for insulating and sheathing materials of electric and optical cables - Part 2-1: Methods specific to elastomeric compounds; Ozone resistance, hot set and mineral oil immersion tests; Amendment 1
|
| IEC 60811-2-1 Edition 2.1-2001
| 電纜和光纜用絕緣和屏蔽材料的共同試驗方法.第2-1部分:彈性體所用特定方法.臭氧抗性、熱固和礦物油浸試驗
| Common test methods for insulating and sheathing materials of electric and optical cables - Part 2-1: Methods specific to elastomeric compounds; Ozone resistance, hot set and mineral oil immersion tests
|
| IEC 60811-2-1-1998
| 電纜和光纜用絕緣和護套材料 通用試驗方法 第2-1部分:彈性化合物專用方法 耐臭氧試驗、熱凝固試驗和礦物油
| Insulating and sheathing materials of electric and optical cables - Common test methods - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests
|
| IEC 60811-3-1 AMD 1-1994
| 電纜絕緣和護套材料的通用試驗方法 第3部分:聚氯乙稀(PVC)化合物專用方法 第1節:高溫下壓力試驗 耐裂試驗
| Common test methods for insulating and sheathing materials of electric cables - Part 3: Methods specific to PVC compounds - Section 1: Pressure test at high temperature - Tests for resistance to cracking; Amendment 1
|
| IEC 60811-3-1 AMD 2-2001
| 電纜絕緣和護套材料的通用試驗方法 第3部分:聚氯乙烯(PVC)化合物專用方法 第1節:高溫下壓力試驗 耐裂試
| Common test methods for insulating and sheathing materials of electric and optical cables - Part 3-1: Methods specific to PVC compounds - Pressure test at high temperature; Tests for resistance to cracking; Amendment 2
|
| IEC 60811-3-1 Corrigendum 1-1986
| 電纜絕緣和護套材料的通用試驗方法.第3部分:聚氯乙烯(PVC)化合物專用方法.第1節:高溫下壓力試驗.耐裂試驗.
| Common test methods for insulating and sheathing materials of electric cables - Part 3 : Methods specific to PVC compounds - Section 1: Pressure test at high temperature - Tests for resistance to cracking; Corrigendum 1
|
| IEC 60811-3-1-1985
| 電纜絕緣和護套材料的通用試驗方法 第3部分:聚氯乙烯(PVC)化合物專用方法 第1節:高溫下壓力試驗 耐裂試驗
| Common test methods for insulating and sheathing materials of electric cables. Part 3 : Methods specific to PVC compounds. Section One : Pressure test at high temperature - Tests for resistance to cracking
|
| IEC 60811-3-2 AMD 1-1993
| 電纜絕緣和護套材料的通用試驗方法 第3部分:聚氯乙烯(PVC)化合物專用方法 第2節:質量損失試驗 熱穩定性試驗
| Common test methods for insulating and sheathing materials of electric cables; part 3: methods specific to PVC compounds; section 2: loss of mass test; thermal stability test; amendment 1
|
| IEC 60811-3-2 AMD 2-2003
| 電纜和光纜用絕緣和護套材料.通用試驗方法.第3-2部分:PVC化合物專用方法.質量損失試驗.熱穩定性試驗.修改件
| Insulating and sheathing materials of electric and optical cables - Common test methods - Part 3-2: Methods specific to PVC compounds - Loss of mass test - Thermal stability test; Amendment 2
|
| IEC 60811-3-2 Corrigendum 1-1986
| 電纜絕緣和護套材料的通用試驗方法.第3部分:聚氯乙烯(PVC)化合物專用方法.第2節:質量損失試驗.熱穩定性試驗
| Common test methods for insulating and sheathing materials of electric cables - Part 3 : Methods specific to PVC compounds - Section 2: Loss of mass test - Thermal stability test; Corrigendum 1
|
| IEC 60811-3-2-1985
| 電纜絕緣和護套材料的通用試驗方法 第3部分:聚氯乙烯(PVC)化合物專用方法 第2節:質量損失試驗 熱穩定性試驗
| Common test methods for insulating and sheathing materials of electric cables. Part 3 : Methods specific to PVC compounds. Section Two : Loss of mass test - Thermal stability test
|
| IEC 60811-4-1-2004
| 電纜和光纜絕緣和護套材料的通用試驗方法.第4-1部分:聚乙烯和聚丙烯化合物專用方法.抗環境應力致裂.熔化流
| Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-1: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filler content measurement in polyethylene by direct combustion - Measurement of carbon black content by thermogravimetric analysis (TGA) - Assessment of carbon black dispersion in polyethylene using a microscope
|
| IEC 60811-4-2-2004
| 電纜和光纜的絕緣和護套材料的通用試驗方法.第4-2部分:聚乙烯和聚丙烯化合物專用方法.高溫處理后抗拉強度和
| Insulating and sheathing materials of electric and optical fibre cables - Common test methods - Part 4-2: Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stability test - Test method for copper-catalysed oxidative degradation
|
| IEC 60811-5-1 AMD 1-2003
| 電纜和光纜用絕緣和護套材料.通用試驗方法.第5-1部分:填充復合物的專用方法.滴點.油分離.較低溫脆性.總酸值
| Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - DC resistivity at 23 °C and 100 °C; Amendment 1
|
| IEC 60811-5-1 Edition 1.1-2004
| 電纜和光纜用絕緣和護套材料.通用試驗方法.第5-1部分:填充復合物的專用方法.滴點.油分離.較低溫脆性.總酸值
| Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop-point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - DC resistivity at 23 °C and 100 °C
|
| IEC 60811-5-1-1990
| 電纜絕緣和護套材料的通用試驗方法 第5部分:填充復合物的專用方法 第1節:滴點 油分離 較低溫脆性 總酸值 無
| Common test methods for insulating and sheathing materials of electric cables; part 5: methods specific to filling compounds; section one: drop point; separation of oil; lower temperature brittleness; total acid number; absence of corrosive components; permittivity at 23 °C; d.c. resistivity at 23 °C and 100 °C
|
| IEC 60840-2004
| 額定電壓為30KV(Um=36KV)以上至150KV(Um=170KV)以下的擠壓絕緣的電力電纜及其附件.要求和試驗方法
| Power cables with extruded insulation and their accessories for rated voltages above 30 kV (U<(Index)m> = 36 kV) up to 150 kV (U<(Index)m> = 170 kV) - Test methods and requirements
|
| IEC 60853-1 AMD 1-1994
| 電纜周期性和事故電流定額的計算 第1部分:18/30(36)kV及以下電纜周期性定額因數 修改1
| Calculation of the cyclic and emergency current rating of cables - Part 1: Cyclic rating factor for cables up to and including 18/30(36) kV; Amendment 1
|
| IEC 60853-1-1985
| 電纜周期性和事故電流定額的計算 第1部分:18/30(36)kV及以下電纜周期性頂額的因數
| Calculation of the cyclic and emergency current rating of cables. Part 1 : Cyclic rating factor for cables up to and including 18/30 (36) kV
|
| IEC 60853-2-1989
| 電纜周期性和事故電流定額的計算 第2部分:18/30(36)kV以上電纜的周期性定額和一切電壓電纜的事故定額
| Calculation of the cyclic and emergency current rating of cables; part 2: cyclic rating of cables greater than 18/30 (36) kV and emergency ratings for cables of all voltages
|
| IEC 60853-3-2002
| 電纜周期性和事故電流定額的計算.第3部分:在半干燥土壤中全壓電纜的周期性定額因數
| Calculation of the cyclic and emergency current rating of cables - Part 3: Cyclic rating factor for cables of all voltages, with partial drying of the soil
|
| IEC 60885-1-1987
| 電纜的電氣試驗方法 第1部分:電壓450/750V及以下電纜、軟線和電線的電氣試驗
| Electrical test methods for electric cables. Part 1 : Electrical tests for cables, cords and wires for voltages up to and including 450/750 V
|
| IEC 60885-2-1987
| 電纜的電氣試驗方法 第2部分:局部放電試驗
| Electrical test methods for electric cables. Part 2 : Partial discharge tests
|
| IEC 60885-3-1988
| 電纜的電氣試驗方法 第3部分:測量擠壓電力電纜段局部放電的試驗方法
| Electrical test methods for electric cables; part 3: test methods for partial discharge measurements on lengths of extruded power cable
|
| IEC 60918 AMD 1-1992
| 間距為1 27mm絕緣刺破型端接式的聚氯乙烯絕緣帶狀電纜 修改1
| PVC insulated ribbon cable with a pitch of 1,27 mm suitable for insulation displacement termination; amendment 1 to IEC 60918:1987
|
| IEC 60918-1987
| 間距為1 27mm絕緣刺破型端接式的聚氯乙烯絕緣帶狀電纜
| PVC insulated ribbon cable with a pitch of 1.27 mm suitable for insulation displacement termination.
|
| IEC 60966-1-1999
| 射頻同軸電纜組件 第1部分:總規范 一般要求和試驗方法
| Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods
|
| IEC 60966-2-1-2003
| 射頻同軸電纜組件.第2-1部分:柔軟同軸電纜組件分規范
| Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies
|
| IEC 60966-2-2-2003
| 射頻同軸電纜組件.第2-2部分:柔軟同軸電纜組件空白詳細規范
| Radio frequency and coaxial cable assemblies - Part 2-2: Blank detail specification for flexible coaxial cable assemblies
|
| IEC 60966-2-3-2003
| 射頻同軸電纜組件.第2-3部分:柔軟同軸電纜組件詳細規范
| Radio frequency and coaxial cable assemblies - Part 2-3: Detail specification for flexible coaxial cable assemblies
|
| IEC 60966-2-4-2003
| 射頻和同軸電纜組件.第2-4部分:無線電和電視接收機用0-3000MHz、使用IEC 60169-2連接器的電纜組件的詳細規
| Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 3 000 MHz, IEC 61169-2 connectors
|
| IEC 60966-2-5-2003
| 射頻和同軸電纜組件.第2-5部分:無線電和電視接收機用0-3000MHz、使用IEC 61169-2聯接器的電纜組件詳細規范
| Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 1 000 MHz, IEC 61169-2 connectors
|
| IEC 60966-2-6-2003
| 射頻和同軸電纜組件.第2-6部分:無線電和電視接收機用,0-3000MHZ、使用IEC60169-24連接器的電纜組件詳細規范
| Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 3000 MHz, IEC 61169-24 connectors
|
| IEC 60966-3-1-2003
| 射頻同軸電纜組件.第3-1部分:半柔軟同軸電纜組件空白詳細規范
| Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies
|
| IEC 60966-3-2-2003
| 射頻同軸電纜組件.第3-2部分:GSM(0.8GHz-1GHz)用半柔軟同軸電纜組件詳細規范
| Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz)
|
| IEC 60966-3-2003
| 射頻同軸電纜組件.第3部分:半柔軟同軸電纜組件分規范
| Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies
|
| IEC 60966-4-1-2003
| 射頻同軸電纜組件.第4-1部分:半硬同軸電纜組件空白詳細規范
| Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies
|
| IEC 60966-4-2003
| 射頻同軸電纜組件.第4部分:半硬性同軸電纜組件分規范
| Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies
|
| IEC 60974-12-2005
| 弧焊設備.第12部分:焊接電纜的耦合器
| Arc-welding equipment - Part 12: Coupling devices for welding cables
|
| IEC 60986-2000
| 額定電壓6kV(Um=7 2kV)～30kV(Um=36kV)電纜的短路溫度限值
| Short-circuit temperature limits of electric cables with rated voltages from 6 kV (U<(Index)m> = 7,2 kV) up to 30 kV (U<(Index)m> = 36 kV)
|
| IEC 61034-1-2005
| 在規定條件下燃燒的電纜的煙密度的測量.第1部分:試驗設備
| Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
|
| IEC 61034-2-2005
| 在規定條件下燃燒的電纜的煙密度的測量.第2部分:試驗程序和要求
| Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
|
| IEC 61076-4-108-2002
| 電子設備連接器.第4-108部分:有質量評定的印制板連接器.符合IEC 60917-1的基本網格為2.5mm、有25mm模數間距
| Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality; Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
|
| IEC 61076-4-110-2001
| 電子設備用連接器 第4 -110部分：有質量評定的印制板連接器 基本網格為2.0mm，有全屏蔽和閂鎖功能的閂鎖
| Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality; Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
|
| IEC 61076-7-001-2004
| 電子設備連接器.第7-001部分:電纜引出端附件.空白詳細規范
| Connectors for electronic equipment - Part 7-001: Cable outlet accessories - Blank detail specification
|
| IEC 61076-7-100-2006
| 電子設備連接器.第7-100部分:電纜電源插座附件.由高負載矩形或圓形連接器罩和密封系統完整部件組成的米制電
| Connectors for electronic equipment - Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system
|
| IEC 61076-7-2000
| 直流低頻模擬及數字高速數據應用系統用連接器 第7部分:具有質量評定的包括鑒定和能力批準的電纜引出端附件
| Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification
|
| IEC 61084-1 AMD 1-1993
| 電氣裝置用電纜槽和管道系統 第1部分:一般要求 修改1
| Cable trunking and ducting systems for electrical installations; part 1: general requirements; amendment 1
|
| IEC 61084-1-1991
| 電氣裝置用電纜槽和管道系統 第1部分:一般要求
| Cable trunking and ducting systems for electrical installations; part 1: general requirements
|
| IEC 61084-2-1-1996
| 電氣裝置用電纜槽和管道系統 第2部分:特殊要求 第1節:安裝在墻上或天花板上的電纜槽和管道系統
| Cable trunking and ducting systems for electrical installations - Part 2: Particular requirements - Section 1: Cable trunking and ducting systems intended for mounting on walls or ceilings
|
| IEC 61084-2-2-2003
| 電氣裝置用電纜槽和管道系統.第2-2部分:特殊要求.安裝在地板下和與地板齊平的設施用電纜槽和管道系統
| Cable trunking and ducting systems for electrical installations - Part 2-2: Particular requirements; Cable trunking systems and cable ducting systems intended for underfloor and flushfloor installations
|
| IEC 61084-2-4-1996
| 電氣裝置用電纜槽和管道系統 第2部分:特殊要求 第4節:接線柱
| Cable trunking and ducting systems for electrical installations - Part 2: Particular requirements - Section 4: Service poles
|
| IEC 61138 AMD 1-1995
| 便攜式接地和短路設備用電纜 修改1
| Cables for portable earthing and short-circuiting equipment; Amendment 1
|
| IEC 61138-1994
| 便攜式接地和短路設備用電纜
| Cables for portable earthing and short-circuiting equipment
|
| IEC 61156-1 Corrigendum 1-2005
| 勘誤1.數字通信用對絞/星絞多芯和對稱電纜.第1部分:總規范
| Corrigendum 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification
|
| IEC 61156-1-1-2001
| 數字通信用對絞或星絞多芯對稱電纜 第1-1部分：能力批準 總規范
| Multicore and symmetrical pair/quad cables for digital communications - Part 1-1: Capability approval; Generic specification
|
| IEC 61156-1-2002
| 數字通信用對絞或星絞多芯對稱電纜.第1部分:總規范
| Multicore and symmetrical pair/quad cables for digital communication - Part 1: Generic specification
|
| IEC 61156-2-1-2003
| 數字通信用對絞或星絞多芯對稱電纜.第2-1部分:水平平面布線.空白詳細規范
| Multicore and symmetrical pair/quad cables for digital communications - Part 2-1: Horizontal floor wiring; Blank detail specification
|
| IEC 61156-2-2-2001
| 數字通信用對絞或星絞多芯對稱電纜 第2-2部分：水平層布線電纜 能力批準 分規范
| Multicore and symmetrical pair/quad cables for digital communications - Part 2-2: Horizontal floor wiring; Capability approval; Sectional specification
|
| IEC 61156-2-2003
| 數字通信用對絞或星絞多芯對稱電纜.第2部分:水平平面布線.分規范
| Multicore and symmetrical pair/quad cables for digital communications - Part 2: Horizontal floor wiring; Sectional specification
|
| IEC 61156-3-1-2003
| 數字通信用對絞或星絞多芯對稱電纜.第3-1部分:工作區布線電纜.空白詳細規范
| Multicore and symmetrical pair/quad cables for digital communications - Part 3-1: Work area wiring; Blank detail specification
|
| IEC 61156-3-2-2001
| 數字通信用對絞或星絞多芯對稱電纜 第3-2部分：工作區布線電纜 能力批準 分規范
| Multicore and symmetrical pair/quad cables for digital communications - Part 3-2: Work area wiring; Capability approval; Sectional specification
|
| IEC 61156-3-2003
| 數字通信用對絞或星絞多芯對稱電纜.第3部分:工作區布線電纜.分規范
| Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area wiring; Sectional specification
|
| IEC 61156-4-1-2003
| 數字通信用對絞或星絞多芯對稱電纜.第4-1部分:垂直布線.空白詳細規范.修改件1
| Multicore and symmetrical pair/quad cables for digital communications - Part 4-1: Riser cables; Blank detail specification
|
| IEC 61156-4-2-2001
| 數字通信用對絞或星絞多芯對稱電纜 第4-2部分：垂直布線電纜 能力批準 分規范
| Multicore and symmetrical pair/quad cables for digital communications - Part 4-2: Riser cables; Capability approval; Sectional specification
|
| IEC 61156-4-2003
| 數字通信用對絞或星絞多芯對稱電纜.第4部分:引上電纜.分規范
| Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables; Sectional specification
|
| IEC 61156-5-1-2002
| 數字通信用對絞/星絞多芯和對稱電纜.第5-1部分:不高于600MHz的有傳輸特性的對絞/星絞對稱電纜.水平地板布線
| Multicore and symmetrical pair/quad cables for digital communications - Part 5-1: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz; Horizontal floor wiring; Blank detail specification
|
| IEC 61156-5-2-2002
| 數字通信用對絞/星絞多芯和對稱電纜.第5-2部分:不高于600MHz的有傳輸特性的對絞/星絞對稱電纜.水平地板布線
| Multicore and symmetrical pair/quad cables for digital communications - Part 5-2: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz; Horizontal floor wiring; Capability approval; Sectional specification
|
| IEC 61156-5-2002
| 數字通信用對絞/星絞多芯和對稱電纜.第5部分:不高于600MHz的有傳輸特性的對絞/星絞對稱電纜.水平地板布線.
| Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz; Horizontal floor wiring; Sectional specification
|
| IEC 61156-6-1-2002
| 數字通信用對絞/星絞多芯和對稱電纜.第6-1部分:不高于600MHz的有傳輸特性的對絞/星絞對稱電纜.工作場所布線
| Multicore and symmetrical pair/quad cables for digital communications - Part 6-1: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz; Work area wiring; Blank detail specification
|
| IEC 61156-6-2-2002
| 數字通信用對絞/星絞多芯和對稱電纜.第6-2部分:不高于600MHz的有傳輸特性的對絞/星絞對稱電纜.工作場所布線
| Multicore and symmetrical pair/quad cables for digital communications - Part 6-2: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz; Work area wiring; Capability approval; Sectional specification
|
| IEC 61156-6-2002
| 數字通信用對絞/星絞多芯和對稱電纜.第6部分:不高于600MHz的有傳輸特性的對絞/星絞對稱電纜.工作場所布線.
| Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz; Work area wiring; Sectional specification
|
| IEC 61156-7-1-2003
| 數字通信用對絞/星絞多芯對稱電纜.第7-1部分:1200MHz及以下傳輸特性的對絞對稱電纜.數字和模擬通信電纜的空
| Multicore and symmetrical pair/quad cables for digital communications - Part 7-1: Symmetrical pair cables with transmission characteristics up to 1200 MHz; Blank detail specification for digital and analog communication cables
|
| IEC 61156-7-2-2003
| 數字通信用對絞/星絞多芯對稱電纜.第7-2部分:1200MHz及以下傳輸特性的對絞對稱電纜.質量評定程序.數字和模
| Multicore and symmetrical pair/quad cables for digital communications - Part 7-2: Symmetrical pair cables with transmission characteristics up to 1200 MHz; Quality assessment procedure; Sectional specification for digital and analog communication cables
|
| IEC 61156-7-2003
| 數字通信用對絞/星絞多芯對稱電纜.第7部分:1200MHz及以下傳輸特性的對絞對稱電纜.數字和模擬通信電纜的分規
| Multicore and symmetrical pair/quad cables for digital communications - Part 7: Symmetrical pair cables with transmission characteristics up to 1200 MHz; Sectional specification for digital and analog communication cables
|
| IEC 61169-24-2001
| 射頻連接器 第24部分：分規范 螺紋連接射頻同軸連接器，典型的用于75Ω電纜分配系統（F型）
| Radio-frequency connectors - Part 24: Sectional specification; Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F)
|
| IEC 61196-1-100-2005
| 同軸通信電纜.第1-100部分:電氣試驗方法.一般要求
| Coaxial communication cables - Part 1-100: Electrical test methods - General requirements
|
| IEC 61196-1-101-2005
| 同軸通信電纜.第1-101部分:電氣試驗方法.電纜導線的直流電阻試驗
| Coaxial communication cables - Part 1-101: Electrical test methods - Test for conductor d.c. resistance of cable
|
| IEC 61196-1-102-2005
| 同軸通信電纜.第1-102部分:電氣試驗方法.電纜介質絕緣電阻試驗
| Coaxial communication cables - Part 1-102: Electrical test methods - Test for insulation resistance of cable dielectric
|
| IEC 61196-1-103-2005
| 同軸通信電纜.第1-103部分:電氣試驗方法.電纜容量試驗
| Coaxial communication cables - Part 1-103: Electrical test methods - Test for capacitance of cable
|
| IEC 61196-1-104-2005
| 同軸通信電纜.第1-105部分:電氣試驗方法.電纜的電容穩定性試驗
| Coaxial communication cables - Part 1-104: Electrical test methods - Test for capacitance stability of cable
|
| IEC 61196-1-105-2005
| 同軸通信電纜.第1-105部分:電氣試驗方法.電纜電介質的耐電壓試驗
| Coaxial communication cables - Part 1-105: Electrical test methods - Test for withstand voltage of cable dielectric
|
| IEC 61196-1-107-2005
| 同軸通信電纜.第1-107部分:電氣試驗方法.電纜顫噪轉換電平試驗(機械感應噪聲)
| Coaxial communication cables - Part 1-107: Electrical test methods - Test for cable microphony charge level (mechanically induced noise)
|
| IEC 61196-1-108-2005
| 同軸通信電纜.第1-108部分:電氣試驗方法.特征阻抗、相位、群延遲、電長度和傳播速度的測試
| Coaxial communication cables - Part 1-108: Electrical test methods - Test for characteristic impedance, phase and group delay, electrical length and propagation velocity
|
| IEC 61196-1-111-2005
| 同軸通信電纜.第1-111部分:電氣試驗方法.相常數的穩定性試驗
| Coaxial communication cables - Part 1-111: Electrical test methods - Test for stability of phase constant
|
| IEC 61196-1-112-2006
| 同軸通信電纜.第1-112部分:電氣試驗方法.回程損耗試驗(阻抗的均勻性)
| Coaxial communication cables - Part 1-112: Electrical test methods - Test for return loss (uniformity of impedance)
|
| IEC 61196-1-115-2006
| 同軸通信電纜.第1-115部分:電氣試驗方法.阻抗的規律性試驗(脈沖/步幅功能回程損耗)
| Coaxial communication cables - Part 1-115: Electrical test methods - Test for regularity of impedance (pulse/step function return loss)
|
| IEC 61196-1-122-2006
| 同軸通信電纜.第1-122部分:電氣試驗方法.同軸電纜之間的串音試驗
| Coaxial communication cables - Part 1-122: Electrical test methods - Test for cross-talk between coaxial cables
|
| IEC 61196-1-200-2005
| 同軸通信電纜.第1-200部分:環境試驗方法.總規范
| Coaxial communication cables - Part 1-200: Environmental test methods - General requirements
|
| IEC 61196-1-2005
| 同軸通信電纜.第1部分:總規范.總則、定義和要求
| Coaxial communication cables - Part 1: Generic specification - General, definitions and requirements
|
| IEC 61196-1-206-2005
| 同軸通信電纜.第1-206部分:環境試驗方法.氣候的序列試驗
| Coaxial communication cables - Part 1-206: Environmental test methods - Climatic sequence
|
| IEC 61196-1-301-2005
| 同軸通信電纜.第1-301部分:機械試驗方法.橢圓度試驗
| Coaxial communication cables - Part 1-301: Mechanical test methods - Test for ovality
|
| IEC 61196-1-302-2005
| 同軸通信電纜.第1-302部分:機械試驗方法.偏心率試驗
| Coaxial communication cables - Part 1-302: Mechanical test methods - Test for eccentricity
|
| IEC 61196-1-308-2005
| 同軸通信電纜.第1-308部分:機械試驗方法.包銅金屬抗拉強度和伸長性試驗
| Coaxial communication cables - Part 1-308: Mechanical test methods - Test for tensile strength and elongation for copper-clad metals
|
| IEC 61196-1-310-2005
| 同軸通信電纜.第1-310部分:機械試驗方法.包銅金屬扭曲特性試驗
| Coaxial communication cables - Part 1-310: Mechanical test methods - Test for torsion characteristics of copper-clad metals
|
| IEC 61196-1-314-2006
| 同軸通信電纜.第1-314部分:機械試驗方法.彎曲試驗
| Coaxial communication cables - Part 1-314: Mechanical test methods - Test for bending
|
| IEC 61196-1-316-2005
| 同軸通信電纜.第1-316部分:機械試驗方法.電纜的最大拉力試驗
| Coaxial communication cables - Part 1-316: Mechanical test methods - Test for maximum pulling force of cable
|
| IEC 61196-1-317-2006
| 同軸通信電纜.第1-317部分:機械試驗方法.電纜的抗壓碎試驗
| Coaxial communication cables - Part 1-317: Mechanical test methods - Test for crush resistance of cable
|
| IEC 61196-1-324-2006
| 同軸通信電纜.第1-324部分:機械試驗方法.電纜的耐磨損試驗
| Coaxial communication cables - Part 1-324: Mechanical test methods - Test for abrasion resistance of cable
|
| IEC 61196-2-1995
| 射頻電纜 第2部分:聚四氟乙烯(PTFE)絕緣半硬射頻同軸電纜分規范
| Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation
|
| IEC 61196-3-1-1995
| 射頻電纜 第3部分:水平層布線數字通信用同軸電纜 第1節:有效半徑達到500m、速率10 Mb/s及以下的電纜詳細規
| Radio-frequency cables - Part 3: Coaxial cables for digital communication in horizontal floor wiring - Section 1: Detail specification for cables of 500 m reach and up to 10 Mb/s
|
| IEC 61196-3-1998
| 射頻電纜 第3部分:局域網用同軸電纜分規范
| Radio-frequency cables - Part 3: Sectional specification for coaxial cables for local area networks
|
| IEC 61196-3-2-1997
| 射頻電纜 第3-2部分:水平層布線數字通信用同軸電纜 有效半徑達到185m、速率10Mb/s以下的局域網用實心介質同
| Radio-frequency cables - Part 3-2: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s
|
| IEC 61196-3-3-1997
| 射頻電纜 第3-3部分:水平層布線數字通信用同軸電纜 有效半徑達到185m、速率10Mb/s以下的局域網用泡沫介質同
| Radio-frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s
|
| IEC 61196-4-2004
| 同軸通信電纜.第4部分:輻射電纜分規范
| Coaxial communication cables - Part 4: Sectional specification for radiating cables
|
| IEC 61238-1-2003
| 額定電壓30KV(U<指數m>=36 kV)電力電纜用壓接和機械連接器.第1部分:試驗方法和要求
| Compression and mechanical connectors for power cables for rated voltages up to 30 kV (U<(Index)m>=36 kV) - Part 1: Test methods and requirements
|
| IEC 61316-1999
| 工業電纜卷筒
| Industrial cable reels
|
| IEC 61386-21-2002
| 電纜管理用導管系統.第21部分:特殊要求:剛性導管系統
| Conduit systems for cable management - Part 21: Particular requirements; Rigid conduit systems
|
| IEC 61386-22-2002
| 電纜管理用導管系統.第22部分:特殊要求:可彎曲的導管系統
| Conduit systems for cable management - Part 22: Particular requirements; Pliable conduit systems
|
| IEC 61386-23-2002
| 電纜管理用導管系統.第23部分:特殊要求:撓性導管系統
| Conduit systems for cable management - Part 23: Particular requirements; Flexible conduit systems
|
| IEC 61386-24-2004
| 電纜管理用導管系統.第24部分:特殊要求.埋于地下的導管系統
| Conduit systems for cable management - Part 24: Particular requirements - Conduit systems buried underground
|
| IEC 61442-2005
| 額定電壓6-30kV(Um=7.2-36kV)的電力電纜附件的試驗方法
| Test methods for accessories for power cables with rated voltages from 6 kV (U<(Index)m> = 7,2 kV) up to 30 kV (U<(Index)m> = 36 kV)
|
| IEC 61443-1999
| 額定電壓30kV(Um=36kV)以上電纜的短路溫度極限值
| Short-circuit temperature limits of electric cables with rated voltages above 30 kV (U<(Index)m> = 36 kV)
|
| IEC 61515-1995
| 礦物絕緣熱電偶電纜和熱電偶
| Mineral insulated thermocouple cables and thermocouples
|
| IEC 61537-2001
| 電纜管理用電纜溝系統和電纜梯架系統
| Cable tray systems and cable ladder systems for cable management
|
| IEC 61935-1 Edition 1.1-2002
| 通用布線系統.根據ISO/IEC 11801對對稱通信布線進行檢驗的規范.第1部分:電纜敷設
| Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 1: Installed cabling
|
| IEC 61935-1-2005
| 根據ISO/IEC 11801對對稱通信布線進行檢驗.第1部分:已安裝的電纜
| Testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 1: Installed cabling
|
| IEC 61950-1997
| 電纜布置系統 電氣裝置用超重負載型金屬導管配件的規范
| Cable management systems - Specification for conduit fittings for electrical installations for extra-heavy duty metal conduit
|
| IEC 62012-1-2004
| 在雜亂信號環境中使用的數字通信用對絞/星絞多芯和對稱電纜.第1部分:總規范
| Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification
|
| IEC 62037-1999
| 射頻連接器、連接器電纜組件和電纜 互調電平測量
| RF connectors, connector cable assemblies and cables - Intermodulation level measurement
|
| IEC 62067 Edition 1.1-2006
| 額定電壓150千伏以上(Um=170KV)至500千伏(Um=550KV)的擠包絕緣電力電纜及其附件.試驗方法和要求
| Power cables with extruded insulation and their accessories for rated voltages above 150 kV (U<(Index)m> = 170 kV) up to 500 kV (U<(Index)m> = 550 kV) - Test methods and requirements
|
| IEC 62067-2001
| 額定電壓150KV（Um=170KV）以上至500KV（Um=550KV）的擠包絕緣電力電纜及其附件 試驗方法和要求
| Power cables with extruded insulation and their accessories for rated voltages above 150 kV (U<(Index)m> = 170 kV) up to 500 kV (U<(Index)m> = 550 kV) - Test methods and requirements
|
| IEC 62153-1-1-2003
| 金屬通信電纜試驗方法.第1-1部分:電氣.用離散傅里葉逆變換測量頻域中的脈沖/分步回程損失
| Metallic communication cables test methods - Part 1-1: Electrical; Measurement of the pulse/step return loss in the frequency domain using the Inverse Discrete Fourier Transformation (IDFT)
|
| IEC 62153-4-2-2003
| 金屬通信電纜試驗方法.第4-2部分:電磁兼容性(EMC).屏蔽和耦合衰減.注入夾緊法
| Metallic communication cables test methods - Part 4-2: Electromagnetic compatibility (EMC); Screening and coupling attenuation; Injection clamp method
|
| IEC 62153-4-3-2006
| 金屬通信電纜試驗方法.第4-3部分:電磁兼容性(EMC).表面?zhèn)鬏斪杩?三維法
| Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) - Surface transfer impedance - Triaxial method
|
| IEC 62153-4-4-2006
| IEC 62153-4-4:金屬通信電纜試驗方法.第4-4部分:電磁兼容性(EMC).測量大于等于3GHz屏蔽衰減的屏蔽篩衰減量
| IEC 62153-4-4: Metallic communication cable test methods - Part 4-4: Electromagnetic Compatibility (EMC) - Shielded screening attenuation, test method for measuring of the screening attenuation a<(Index)s> up to and above 3 GHz
|
| IEC 62153-4-5-2006
| 金屬通信電纜試驗方法.第4-5部分:電磁兼容性(EMC).耦合或屏蔽衰減.吸收夾緊法
| Metallic communication cable test methods - Part 4-5: Electromagnetic compatibility (EMC) - Coupling or screening attenuation - Absorbing clamp method
|
| IEC 62153-4-6-2006
| 金屬化通信電纜試驗方法.第4-6部分:電磁兼容性(EMC).表面?zhèn)鬏斪杩?線性注入法
| Metallic communication cable test methods - Part 4-6: Electro Magnetic Compatibility (EMC) - Surface transfer impedance - Line injection method
|
| IEC 62153-4-7-2006
| 金屬通信電纜試驗方法.第4-7部分:電磁兼容性(EMC).測量遷移阻抗和屏蔽或耦合衰減的試驗方法.管中管法
| Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring the transfer impedance and the screening - or the coupling attenuation - Tube in tube method
|
| IEC 62230-2006
| 電纜.火花試驗方法
| Electric cables - Spark-test method
|
| IEC 62255-2-1-2006
| 寬帶數字通信用對絞/星絞多芯對稱電纜(高位率數字存取通信網絡).外部設備電纜.第2-1部分:未填充電纜.空白詳
| Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 2-1: Unfilled cables - Blank detail specification
|
| IEC 62255-2-2006
| 寬帶數字通信用對絞/星絞多芯對稱電纜(高位率數字存取通信網絡).外部設備電纜.第2部分:未填充電纜.分規范
| Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 2: Unfilled cables - Sectional specification
|
| IEC 62255-3-1-2006
| 寬帶數字通信用對絞/星絞多芯對稱電纜(高位率數字存取通信網絡).外部設備電纜.第3部分:填充電纜.空白詳細規
| Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 3-1: Filled cables - Blank detail specification
|
| IEC 62255-3-2006
| 寬帶數字通信用對絞/星絞多芯對稱電纜(高位率數字存取通信網絡).外部設備電纜.第3部分:填充電纜.分規范
| Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 3: Filled cables - Sectional specification
|
| IEC 62255-4-1-2006
| 寬帶數字通信用對絞/星絞多芯對稱電纜(高位率數字存取通信網絡).外部設備電纜.第4-1部分:架空引入電纜.空白
| Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 4-1: Aerial drop cables - Blank detail specification
|
| IEC 62255-4-2006
| 寬帶數字通信用對絞/星絞多芯對稱電纜(高位率數字存取通信網絡).外部設備電纜.第4部分:架空引入電纜.分規范
| Multicore and symmetrical pair/quad cables for broadband digital communications (High bit rate digital access telecommunication networks) - Outside plant cables - Part 4: Aerial drop cables - Sectional specification
|
| IEC 62255-5-1-2006
| 寬帶數字通信用對絞/星絞多芯對稱電纜(高位率數字存取通信網絡).外部設備電纜.第5-1部分:填充引入電纜.空白
| Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 5-1: Filled drop cables - Blank detail specification
|
| IEC 62255-5-2006
| 寬帶數字通信用對絞/星絞多芯對稱電纜(高位率數字存取通信網絡).外部設備電纜.第5部分:填充引入電纜.分規范
| Multicore and symmetrical pair/quad cables for broadband digital communications (High bit rate digital access telecommunication networks) - Outside plant cables - Part 5: Filled drop cables - Sectional specification
|
| IEC/PAS 60794-2-50-2004
| 光纜.第2-50部分:室內光纜.接插線中使用的單工和雙工電纜的系列規范
| Optical fibre cables - Part 2-50: Indoor optical fibre cables - Family specification for simplex and duplex cables for use in patch cords
|
| IEC/PAS 61076-3-109-2001
| 電子設備用連接器 第3-109部分：用于在苛刻工業環境中高速數據應用的電纜至印制版的兩斜式連接器的詳細規
| Connectors for electronic equipment - Part 3-109: Detail specification for two-part cable to board connector for high speed data application in a harsh industrial environment; Protection rate IP67 according to IEC 60529
|
| IEC/PAS 62338-2002
| 屏蔽對稱電纜.用三線法連接衰減測量
| Screened balanced cables - Coupling attenuation measurement, triaxial method
|
| IEC/TR 60649-1979
| 戶內裝置用電纜最大外徑的計算
| Calculation of maximum external diameter of cables for indoor installations
|
| IEC/TR 61901-2005
| 對額定電壓超過30kV(U<(Index)m> = 36 kV)的有縱向用金屬箔的電纜的推薦開發試驗
| Development tests recommended on cables with a longitudinally applied metal foil for rated voltages above 30 kV (U<(Index)m> = 36 kV)
|
| IEC/TR 62064-1999
| 射頻電纜 表面?zhèn)鬏斪杩购推帘嗡p關系(IEC 61196-1第14章中推薦極限值的背景文件)
| Radio-frequency cables - Relationship between surface transfer impedance and screening attenuation (A background to the recommended limits contained in IEC 61196-1, clause 14)
|
| IEC/TR 62095-2003
| 電纜.電流額定值的計算.用有限元法測定電纜的電流額定值
| Electric cables - Calculations for the current ratings - Cable current rating using the finite elements method
|
| IEC/TR 62222-2006
| 建筑物內安裝的通信電纜的防火性能
| Fire performance of communication cables installed in buildings
|
| IEC/TR2 61423-1-1995
| 工業用加熱電纜 第1部分:性能要求和試驗方法 2型技術報告
| Heating cables for industrial applications - Part 1: Performance requirements and test methods; Technical Report Type 2
|
| IEC/TR2 61423-2-1995
| 工業用加熱電纜 第2部分:結構和材料要求 2型技術報告
| Heating cables for industrial applications - Part 2: Constructional and material requirements; Technical Report Type 2
|
| IEC/TR3 61000-5-2-1997
| 電磁兼容性(EMC) 第5部分:安裝和調試指南 第2節:接地和電纜敷設
| Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling
|
| IEC/TR3 61917-1998
| 電纜、電纜組件和連接器 電磁(EMC)屏蔽測量介紹
| Cables, cable assemblies and connectors - Introduction to electromagnetic (EMC) screening measurements
|
| IEC/TS 60859 Corrigendum 1-2000
| 額定電壓72.5kV及以上氣體絕緣金屬封閉開關設備的電纜連接.充流體和擠壓絕緣電纜.充流體和干型電纜終端
| Cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above - Fluid-filled and extruded insulation cables - Fluid-filled and dry type cable-terminations
|
| IEC/TS 60859 Corrigendum 2-2000
| 額定電壓72.5kV及以上氣體絕緣金屬封閉開關設備的電纜連接.充流體和擠壓絕緣電纜.充流體和干型電纜終端
| Cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above - Fluid-filled and extruded insulation cables - Fluid-filled and dry type cable-terminations
|
| IEC/TS 60859-1999
| 額定電壓72.5kV及以上氣體絕緣金屬封閉開關設備的電纜連接 充流體和擠壓絕緣電纜 充流體和干型電纜終端
| Cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above - Fluid-filled and extruded insulation cables - Fluid-filled and dry type cable-terminations
|
| IEC/TS 61244-3-2005
| 高聚物的長期輻射老化.第3部分:低壓電纜材料的使用中監測規程
| Long-term radiation ageing in polymers - Part 3: Procedures for in-service monitoring of low-voltage cable materials
|
| IEC/TS 61873-2001
| 5類以上傳輸特性的對絞/星絞對稱電纜的當前技術發展
| State of the art for symmetrical pair/quad cables with transmission characteristics beyond category 5
|
| IEC/TS 62100-2004
| 地面航行照明原電路用電纜
| Cables for aeronautical ground lighting primary circuits
|
| 編號 | 中文名稱 | 英文名稱 |
|---|