| 編號 | 中文名稱 | 英文名稱 |
|---|
| IEEE 1073.3.2-2000
| 醫療裝置通信.傳輸層.連接IrDA基電纜
| (Medical device communications - Transport profile - IrDA based cable connected)
|
| IEEE 1073.4.1-2000
| 醫療裝置通信.物理層接口.電纜連結
| (Medical device communications - Physical layer interface - Cable connected)
|
| IEEE 1120-1990
| 規劃,設計和安裝海底電力電纜和通訊電纜時考慮因素指南
| (Guide to the factors to be considered in the planning, design, and installation of submarine power and communications cables)
|
| IEEE 1143-1994
| 低壓電纜屏蔽指南
| (Guide on shielding practice for low voltage cables)
|
| IEEE 1185-1994
| 發電站電纜敷設方法指南
| (Guide for installation methods for generating station cables)
|
| IEEE 1202-1991
| 工業區和商業區電纜溝中電纜的火焰試驗
| (Flame testing of cables for use in cable tray in industrial and commercial occupancies)
|
| IEEE 1210-1996
| 用金屬線和電纜測定電纜拉伸潤滑劑的適應性
| (Determining compatibility of cable pulling lubricants with wire and cable)
|
| IEEE 1235-2000
| 地下電力電纜和管道用可識別護套的性能指南
| (Guide for the properties of identifiable jackets for underground power cables and ducts)
|
| IEEE 1242-1999
| 石油和化學工廠的動力,控制,特殊用途電纜的特殊處理和選擇指南
| (Guide for specifying and selecting power, control, and special-purpose cable for petroleum and chemical plants)
|
| IEEE 1300-1996
| 氣體絕緣變電所電纜連接指南
| (Guide for cable connections for gas-insulated substations)
|
| IEEE 1333-1994
| 用導向打孔安裝電纜的導則
| (Guide for installation of cable using the guided boring method)
|
| IEEE 1406-1998
| 電力電纜系統用液體中氣體分析的使用指南
| (Guide to the use of gas-in-fluid analysis for electric power cable systems)
|
| IEEE 1407-1998
| 使用充水罐進行中壓擠制電力電纜加速老化試驗的試驗指南
| (Trial-use guide for accelerated aging tests for medium-voltage extruded electric power cables using water-filled tanks)
|
| IEEE 383-1974
| 1E級電纜型式試驗;核電站的現場拼接和聯接
| (Type test of class 1E electric cables; field splices and connections for nuclear power generating stations)
|
| IEEE 400-2001
| 鎧裝電力電纜系統絕緣的現場試驗和評定指南
| (Guide for field testing and evaluation of the insulation of shielded power cable systems)
|
| IEEE 404-2000
| 額定電壓2500V-500000V的擠壓和層壓介質鎧裝電纜接頭
| (Extruded and laminated dielectric shielded cable joints rated 2500 V to 500000 V)
|
| IEEE 48-1996
| 2.5KV-765KV高壓交流電纜終端的試驗程序和要求
| (Test procedures and requirements for alternating-current cable terminations 2.5 kV through 765 kV)
|
| IEEE 525-1992
| 變電站電纜系統設計和安裝指南
| (Guide for the design and installation of cable systems in substations)
|
| IEEE 532-1993
| 電纜護套的選擇和試驗指南
| (Guide for selecting and testing jackets for underground cables)
|
| IEEE 576-2000
| 石化工業用絕緣電力電纜的安裝、端接和試驗推薦規程
| (Recommended practice for installation, termination, and testing of insulated power cable as used in industrial and commercial applications)
|
| IEEE 592-1990
| 高壓電纜接頭和可分離絕緣連接器的外露半導體護套
| (Exposed semiconducting shields on high-voltage cable joints and separable insulated connectors)
|
| IEEE 628-2001
| 核電站1E級電路的電纜管道系統的設計、安裝和鑒定標準
| (Criteria for the design, installation, and qualification of raceway systems for class 1E circuits for nuclear power generating stations)
|
| IEEE 635-1989
| 電力電纜鋁護套的選擇和設計指南
| (Guide for selection and design of aluminium sheaths for power cables)
|
| IEEE 664-1993
| 單芯電纜風振阻振器電力分散特性實驗室測量指南
| (Guide for laboratory measurement of the power dissipation characteristics of aeolian vibration dampers for single conductors)
|
| IEEE 835-1994
| 電力電纜的載流量表
| (Power cable ampacity tables)
|
| IEEE 848-1996
| 防火電纜安載流容量降低額定值測定用工藝程序
| (Procedure for the determination of the ampacity derating of fire-protected cables)
|
| IEEE C 62.22.1-1996
| 絕緣保護鎧裝電力電纜電涌放電器的連接指南
| (Guide for the connection of surge arresters to protect insulated, shielded electric power cable systems)
|
| 編號 | 中文名稱 | 英文名稱 |
|---|