| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI B212.20-1980 | 使用夾持型夾具的帶可轉位刀片的碳化物切片器 | Carbide Chip Breakers Used with Indexable Inserts for Clamp Type Holders |
| ANSI B74.15-1992 | 碳化硅磨料粒和天然磨料的化學分析方法 | Methods of Chemical Analysis of Silicon Carbide Abrasive Grain and Abrasive Crude |
| ANSI INCITS 152-1987 | 辦公室設備和消耗品.非碳化單層計算機用紙卷.規范 代替ANSI X3.151-1987 | Office Machines and Supplies - Noncarbonized, Single-Ply Adding Machine Paper Rolls - Specification Replaces ANSI X3.151-1987 |
| ANSI INCITS152-1987 | 非碳化單層加法機紙卷規范 | Noncarbonized, Single-Ply, Adding Machine Paper Rolls, Specifications for |
| ANSI X3.152-1987 | 辦公用機器和供應品.非碳化,單層加法器紙卷的規范 | Office Machines and Supplies - Noncarbonized, Single-Ply Adding Machine Paper Rolls - Specifications |
| ASTM B276-2005(2010) | 燒結碳化物顯氣孔率的標準試驗方法 | Standard Test Method for Apparent Porosity in Cemented Carbides |
| ASTM B294-2010 | 燒結碳化物硬度試驗的標準試驗方法 | Standard Test Method for Hardness Testing of Cemented Carbides |
| ASTM B406-1996(2010) | 燒結碳化物橫向斷裂強度的標準試驗方法 | Standard Test Method for Transverse Rupture Strength of Cemented Carbides |
| ASTM B886-2003(2008) | 燒結碳化物磁性飽和(MS)測定的標準試驗方法 | Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides |
| ASTM B930-2003(2008) | 確定燒結碳化鎢(硬質合金)中不規則大顆粒的頻度和粒徑額定值的標準試驗方法 | Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals) |
| ASTM C750-2009 | 核純級碳化硼粉末的標準規范 | Standard Specification for Nuclear-Grade Boron Carbide Powder |
| ASTM C751-2007 | 核純級碳化硼丸的標準規范 | Standard Specification for Nuclear-Grade Boron Carbide Pellets |
| ASTM C784-2005 | 核純級的氧化鋁、碳化硼復合丸料的標準規范 | Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets |
| ASTM C791-2004 | 核純級碳化硼的化學、質譜和光譜化學化學分析的標準試驗方法 | Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide |
| ASTM C809-1994(2007) | 核純級氧化鋁和氧化鋁-碳化硼復合丸狀材料化學、質譜和光譜化學分析的標準試驗方法 | Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and AluminumOxide-Boron Carbide Composite Pellets |
| ASTM D4373-2002(2007) | 快速測定土壤中碳化鈣含量的標準試驗方法 | Standard Test Method for Rapid Determination of Carbonate Content of Soils |
| ASTM D4944-2004 | 用碳化鈣氣壓檢驗器法現場測定土壤中水含量的標準試驗方法 | Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester |
| ASTM D5173-1997(2007) | 用化學氧化、紫外光氧化、兩者共用或氣相無彌散紅外線(NDIR)或電解傳導性與高溫燃燒法即時監測水中碳化合物 | Standard Test Method for On-Line Monitoring of Carbon Compounds in Water by Chemical Oxidation, by UV Light Oxidation, by Both, or by High Temperature Combustion Followed by Gas Phase NDIR or by Electrolytic Conductivity |
| ASTM D612-1988(2007) | 石蠟中可碳化物質的標準試驗方法 | Standard Test Method for Carbonizable Substances in Paraffin Wax |
| ASTM D6316-2009b | 煤和焦炭的固體殘留物中可燃燒碳化碳總量測定的標準試驗方法 | Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke |
| ASTM F509-1986(2009) | 銷孔用一次性碳化紙的試驗的標準實施規程 | Standard Practice for Testing One-Time Carbonizing Tissue for Pinholes |
| 編號 | 中文名稱 | 英文名稱 |