| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 2593-1974 | 旋轉鉆桿與碳化鎢硬質合金旋轉鉆頭規范 | Specification for rotary drill rods and tungsten carbide tipped rotary drill bits |
| BS 4193-2-1986 | 鑲硬質合金刀具.第2部分:無固定孔的圓角可轉位硬質合金(碳化物)刀片尺寸規范 | Hardmetal insert tooling - Specification for dimensions for indexable hardmetal (carbide) inserts with rounded corners, without fixing hole |
| BS 4193-3-1997 | 鑲硬質合金刀具.第3部分:帶圓柱圓定孔和圓角可分度硬質合金(碳化物)刀片尺寸規范 | Hardmetal insert tooling - Specification for dimensions of indexable hardmetal (carbide) inserts with rounded corners and with cylindrical fixing hole |
| BS DD CEN/TS 12390-10-2007 | 硬化混凝土測試.混凝土相對抗碳化的測定 | Testing hardened concrete - Determination of the relative carbonation resistance of concrete |
| BS EN 12698-1-2007 | 和碳化硅耐熔制品結合的氮化物的化學分析.化學方法 | Chemical analysis of nitride bonded silicon carbide refractories - Chemical methods |
| BS EN 12698-2-2007 | 和碳化硅耐熔制品結合的氮化物的化學分析.射線衍射(XRD)法 | Chemical analysis of nitride bonded silicon carbide refractories - XRD methods |
| BS EN 13295-2004 | 混凝土結構的保護和維修用產品和系統.試驗方法.抗碳化作用的測定 | Products and systems for the protection and repair of concrete structures.Test methods - Determination of resistance to carbonation |
| BS EN 13639-2002 | 石灰石中有機碳化物總含量的測定 | Determination of total organic carbon in limestone |
| BS EN 14630-2006 | 混凝土結構的保護和修整用產品和設備.試驗方法.用酚酞方法對硬化混凝土中碳化作用深度的測定 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of carbonation depth in hardened concrete by the phenolphthalein method |
| BS EN ISO 105-X01-1996 | 紡織品.色牢度試驗.第X01部分:耐碳化色牢度.氯化鋁法 | Textiles. Tests for colour fastness. Colour fastness to carbonizing: Aluminium chloride |
| BS EN ISO 105-X02-1996 | 紡織品.色牢度試驗.第X02部分:耐碳化色牢度.硫酸法 | Textiles. Tests for colour fastness. Colour fastness to carbonizing: Sulfuric acid |
| BS EN ISO 21068-1-2008 | 含碳化硅的原材料和耐火制品的化學分析.一般信息和樣品制備 | Chemical analysis of silicon-carbide-containing raw materials and refractory products -Part 1: General information and sample preparation |
| BS EN ISO 21068-2-2008 | 含碳化硅的原材料和耐火制品的化學分析.點火、總碳、單體碳和碳化硅、總二氧化硅和游離二氧化硅及總硅和游 | Chemical analysis of silicon-carbide-containing raw materials and refractory products -Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon |
| BS EN ISO 21068-3-2008 | 含碳化硅的原材料和耐火制品的化學分析.氮、氧和金屬及氧化成分的測定 | Chemical analysis of silicon-carbide-containing raw materials and refractory products -Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents |
| BS ISO 15917-2007 | 用碳化物和陶瓷材料制成的柱柄實心球頭端銑刀.尺寸 | Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials - Dimensions |
| BS ISO 2804-1996 | 金屬絲、棒材或管拉伸沖模.硬金屬(碳化物)燒結小球.尺寸 | Wire, bar or tube drawing dies - As-sintered pellets of hardmetal (carbide) - Dimensions |
| BS ISO 9286-1997 | 磨料顆粒和粗料.碳化硅的化學分析 | Abrasive grains and crude - Chemical analysis of silicon carbide |
| 編號 | 中文名稱 | 英文名稱 |