| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI/ASTM A801/A 801M-1999 | 鐵鈷高磁性飽和合金規范 | Specification for Iron-Cobalt High Magnetic Saturation Alloys |
| ANSI/ASTM B166-2001 | 鎳鉻鐵合金(UNS N06600, N06601, and N06690)及鎳鉻鈷鉬合金(UNS N06617)條材、棒材及線材規范 | Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, and N06690) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire |
| ANSI/ASTM B168-2001 | 鎳鉻鐵合金(UNS N06600, N06601 and N06690)及鎳鉻鈷鉬合金(UNS N06617)板、薄板和帶材規范 | Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601 and N06690) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, And Strip |
| ANSI/ASTM B619-2000 | 焊接用鎳和鎳鈷合金管規范 | Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe |
| ANSI/ASTM B622-2000 | 無縫鎳和鎳鈷合金管規范 | Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube |
| ANSI/ASTM B626-2001 | 焊接鎳和鎳鈷合金管規范 | Specification for Welded Nickel and Nickel-Cobalt Alloy Tube |
| ANSI/ASTM B639-1996 | 高溫設備用沉積硬化含鈷合金桿材、棒材、鍛件和鍛造坯料規范 | Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service |
| ANSI/ASTM B719-2000 | 鎳鉻鉬鈷鎢鐵硅合金(UNS N06333)棒材規范 | Specification for Nickel-Chromium-Molybdenum-Cobalt- Tungsten-Iron-Silicon Alloy (UNS N06333) Bar |
| ANSI/ASTM B722-1995 | 鎳鉻鉬鈷鎢鐵硅合金(UNS N06333)無縫管規范 | Specification for Nickel-Chromium-Molybdenum-Colbalt- Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube |
| ANSI/ASTM B726-1996 | 鎳鉻鉬鈷鎢鐵硅合金 (UNS N06333)焊管規范 | Specification for Nickel-Chromium-Molybdenum-Colbalt- Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube |
| ANSI/ASTM B815-1996 | 鈷鉻鎳鉬鎢合金桿規范 | Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod |
| ANSI/ASTM B818-1998 | 鈷鉻鎳鉬鎢合金(UNS R31233)板,薄板和帶材規范 | Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip |
| ANSI/ASTM B872-1996 | 沉淀硬化鎳鐵鉻鈷(Nb)鈦鋁合金(UNS N09908)板、薄板及帶材規范 | Specification for Precipitation-Hardening Nickel-Iron-Chromium-Columbium (NB)-Titanium-Aluminum Alloy (UNS NO9908) Plate, Sheet and Strip |
| ANSI/ASTM B880-1998 | 鎳、鎳合金及鈷合金化學檢驗分析限值一般要求規范 | Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys |
| ASTM A801-2004 | 鍛造鐵-鈷高磁飽和合金的標準規范 | Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650) |
| ASTM B441-2004 | 銅鈷鈹、銅鎳鈹和銅鎳鉛鈹?shù)臈U材和棒材用標準規范(UNS Nos. C17500、C17510和C17465) | Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465) |
| ASTM B534-2007 | 銅-鈷-鈹合金及銅-鎳-鈹合金厚板材、薄板材、帶材和軋制棒材的標準規范 | Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar |
| ASTM B546-2004 | 電熔焊接鎳鉻鈷鉬合金(UNS N06617)、鎳鐵鉻硅合金(UNS N08330和UNS N08332)、鎳鉻鐵鋁合金(UNS N06603)、鎳 | Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
| ASTM B592-2001(2006) | 銅鋅鋁鈷合金、銅鋅錫鐵板、薄板、帶材及軋制的棒材標準規范 | Standard Specification for Copper-Zinc-aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar |
| ASTM B619-2006 | 焊接的鎳和鎳鈷合金管的標準規范 | Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe |
| ASTM B622-2006 | 無縫鎳和鎳鈷合金管的標準規范 | Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube |
| ASTM B626-2006 | 焊接鎳和鎳鈷合金管標準規范 | Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube |
| ASTM B718-2000(2006) | 鎳鉻鉬鈷鎢鐵硅合金板,薄板和帶材的標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip |
| ASTM B719-2000(2005) | 鎳鉻鉬鈷鎢鐵硅合金(UNS N06333)棒標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar |
| ASTM B722-2006 | 鎳-鉻-鉬-鈷-鎢-鐵硅合金(UNS N06333)無縫管道和管標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube |
| ASTM B723-2000(2005) | 鎳鉻鉬鈷鎢鐵硅合金焊接管的標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe |
| ASTM B726-2002(2006) | 鎳鉻鉬鈷鎢鐵硅合金(UNS N06333)焊接管的標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube |
| ASTM B768-1999(2004) | 銅鈷鈹合金和銅鎳鈹合金帶材和板材標準規范 | Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet |
| ASTM B815-2002(2006) | 鈷鉻鎳鉬鎢合金桿標準規范 | Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod |
| ASTM B840-1999(2004) | 鋅鈷合金沉積物用電解鍍層標準規范 | Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits |
| ASTM D1686-1996(2004) | 熔融狀態中固體芳烴與相關材料的顏色的標準試驗方法(鉑鈷標度) | Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale) |
| ASTM D2108-2005 | 鹵化有機溶劑及其混合物顏色的標準試驗方法(鉑鈷標度) | Standard Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale) |
| ASTM D2129-2005 | 用鉑鈷色標標定透明電絕緣液體顏色的標準試驗方法 | Standard Test Method for Color of Clear Electrical Insulating Liquids (Platinum-Cobalt Scale) |
| ASTM D2373-2005 | 用EDTA法測定涂料干燥劑中鈷的標準試驗方法 | Standard Test Method for Determination of Cobalt in Paint Driers by EDTA Method |
| ASTM D3335-1985a(2005) | 原子吸收光譜法測定涂料中低濃度鉛、鎘和鈷的標準試驗方法 | Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy |
| ASTM D3366-1995(2003)e1 | 熔融狀態下和加熱后順酐和苯酐顏色的試驗方法(鉑-鈷比例) | Standard Test Method for Color of Maleic Anhydride and Phthalic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) |
| ASTM D3610-2000(2004) | 電位滴定法測定氧化鋁基鈷-鉬催化劑中總鈷含量的標準試驗方法 | Standard Test Method for Total Cobalt In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method |
| ASTM E1250-1988(2005) | 硅電子器件輻射強度試驗用鈷60輻射源的低能γ成分評估的電離箱的應用的標準試驗方法 | Standard Test Method for Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testing of Silicon Electronic Devices |
| ASTM E1473-2003 | 鎳、鈷和耐高溫合金化學分析用標準試驗方法 | Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys |
| ASTM E159-2006 | 鈷、銅、鎢和鐵粉末中氫的質量損耗用標準試驗方法(氫損耗) | Standard Test Method for Loss of Mass in Hydrogen for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss) |
| ASTM E354-1993(2006) | 高溫鋼、電工鋼、磁鋼和其它類似的鐵、鎳和鈷合金化學分析的標準試驗方法 | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
| ASTM E481-2003 | 用鈷和銀的放射性測定中子積分通量率的標準試驗方法 | Standard Test Method for Measuring Neutron Fluence Rate by Radioactivation of Cobalt and Silver |
| ASTM E592-1999(2004) | 用X射線法做1/4 in至2 in(6-51mm)厚鋼板的射線照相及用鈷-60做1 in至6 in (25-152mm)厚鋼板的射線照相以獲 | Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates 1/4 to 2 in. [6 to 51 mm] Thick with X Rays and 1 to 6 in. [25 to 152 mm] Thick with Cobalt-60 |
| ASTM F1466-1999(2005) | 金屬與陶瓷密封用鐵鎳鈷合金的標準規范 | Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications |
| ASTM F15-2004 | 鐵-鎳-鈷密封合金的標準規范 | Standard Specification for Iron-Nickel-Cobalt Sealing Alloy |
| ASTM F1684-2006 | 低熱膨脹用鐵-鎳和鐵-鎳-鈷合金的標準規范 | Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications |
| ASTM F2527-2005e1 | 外科植入物用鍛造無縫和焊接及拉制的鈷合金小直徑管的標準規范（UNS R30003、 UNS R30008、 UNS R30035、 U | Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537) |
| ASTM F562-2007 | 外科植入用鍛制35鈷-35鎳-20鉻-10鉬合金標準規范(UNS R30035) | Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035) |
| ASTM F688-2005 | 外科植入物用鍛制鈷35鎳20鉻10鉬合金板、薄板及箔標準規范 | Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035) |
| ASTM F75-2007 | 外科植入術用鈷28鉻6鉬鑄件和鑄造合金的標準規范 | Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075) |
| ASTM F799-2006 | 外科移植物用鈷28鉻6鉬合金鍛件(UNS R31537、R31538、R31539)標準規范 | Standard Specification for Cobalt-28Chromium-6Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539) |
| ASTM F90-2007 | 外科植入物用鍛造鈷-20鉻-15鎢-10鎳合金的標準規范 | Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605) |
| ASTM G61-1986(2003)e1 | 鐵鎳鈷基合金的局部腐蝕敏感性的循環動電勢極化強度的試驗方法 | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys |
| IEEE N 449.1-1978 | 鈷60和銫137遙控儀器的定期檢測程序 | (Procedures for periodic inspection of cobalt-60 and cesium-137 teletherapy equipment) |
| 編號 | 中文名稱 | 英文名稱 |