| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 2HC 204-1989 | 鎳-鈷-鉻-鋁-鈦-鉬合金鑄件規范(鎳基鈷15.0、鉻10.0、鋁5.5、鈦4.8、鉬3.0) | Specification for nickel-cobalt-chromium-aluminium-titanium-molybdenum alloy castings (Nickel base Co 15.0, Cr 10.0, Al 5.5, Ti 4.8, Mo 3.0) |
| BS 2HC 207-1989 | 鎳-鈷-鎢-鉻-鋁-鉭-鉿-鈦合金鑄件規范(鎳基鈷10.0、鎢10.0、鉻9.0、鋁5.5、鉭25、鉿1.5、鈦1.5) | Specification for nickel-cobalt-tungsten-chromium-aluminium-tantalum-hafnium-titanium alloy castings (Nickel base Co 10.0, W 10.0, Cr 9.0, Al 5.5, Ta 2.5, Hf 1.5, Ti 1.5) |
| BS 2HC 208-1989 | 鎳-鈷-鎢-鉻-鋁-鉬-鈦-鉭合金鑄件規范(鎳基Co 10.0、W 10.0、Cr 9.0、Al 5.5、Mo 2.5、Ti 1.5、Ta 1.5) | Specification for nickel-cobalt-tungsten-chromium-aluminium-molybdenum-titanium-tantal um alloy castings (nickel base Co 10.0, W 10.0, Cr 9.0, Al 5.5, Mo 2.5, Ti 1.5, Ta 1.5) |
| BS 2HC 211-1989 | 鎳-鉻-鈷-鉬-鋁鈦合金鑄件規范(鎳基鉻15.5、鈷10.0、鉬8.3、鋁4.2、鈦3.6) | Specification for nickel-chromium-cobalt-molybdenum-aluminium-titanium alloy castings (Nickel base Cr 15.5, Co 10.0, Mo 8,3, Al 4.2, Ti 3.6) |
| BS 2HR 202-1973 | 鎳-鉻-鈷-鈦耐熱合金薄板材和帶材(鎳基、Cr19.5、Co18.0、Ti2.5、Al 1.5)規范 | Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy sheet and strip (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) |
| BS 2HR 501-1973 | 彈簧用冷拉固溶熱處理的鎳鉻鈷鈦鋁耐熱合金線材(鎳基、Cr19.5、Co18.0、Ti2.5、Al 1.5)規范 | Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold drawn wire for springs (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) |
| BS 2HR 502-1973 | 彈簧用冷拉和固溶熱處理的鎳鉻鈷鈦鋁耐熱合金線材(鎳基、Cr19.5、Co18.0、Ti2.5、Al 1.5)規范 | Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold drawn and solution heat treated wire for springs (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) |
| BS 2HR 503-1973 | 螺紋墊圈(直徑0.45mm-2mm)用鎳鉻鈷鈦鋁耐熱合金線材(鎳基、Cr19.5、Co18.0、Ti2.5、Al 1.5)規范 | Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire for thread inserts (0.45 mm to 2 mm diameter) (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) |
| BS 3146-2-1975 | 金屬熔模鑄造規范.第2部分:耐蝕耐熱鋼、鎳和鈷基合金 | Specification for investment castings in metal - Corrosion and heat resisting steels, nickel and cobalt base alloys |
| BS 3482-9-1991 | 干燥劑試驗方法.第9部分:氯化鈷含量測定 | Methods of test for desiccants - Determination of cobalt chloride content |
| BS 3523-1991 | 用氯化鈷浸泡的粒狀干燥劑硅膠規范 | Specification for granular desiccant silica gel impregnated with cobalt chloride |
| BS 3727-5-1964 | 電子管和電子閥用鎳的分析方法.第5部分:鈷含量測定(光度測量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of cobalt (photometric method) |
| BS 5339-1976 | 液態化學制品顏色按黑曾(Hazen)單位(鉑-鈷度標)測量方法 | Method of measurement of colour in Hazen units (platinum-cobalt scale) of liquid chemical products |
| BS 6068-2.29-1987 | 水質.第2部分:物理、化學和生物化學方法.第29節:鈷、鎳、銅、鋅、鎘和鉛含量測定:火焰原子吸收光譜法 | Water quality - Physical, chemical and biochemical methods - Determination of cobalt, nickel, copper, zinc, cadmium and lead: flame atomic absorption spectrometric methods |
| BS 6200-3.11.1-1991 | 鐵、鋼和其他鐵合金的抽樣和分析.分析方法.鈷的測定.鋼和鑄鐵:分光光度測定法 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of cobalt - Steel and cast iron: spectrophotometric method |
| BS 6200-3.11.2-1991 | 鐵、鋼和其他鐵金屬的抽樣和分析.分析方法.鈷的測定.鐵、鋼和制鋼材料:痕跡量的分光光度測定 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of cobalt - Steel, irons and steelmaking materials: spectrophotometric method for trace amounts |
| BS 6200-3.11.3-1997 | 鐵、鋼和其它黑色金屬取樣和分析.第3部分:分析方法.第11節:鈷含量測定.第3小節:火焰原子吸收分光光度法 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of cobalt - Flame atomic absorption spectrometric method |
| BS 6200-3.40.1-1997 | 鋼、鐵和其他黑色金屬取樣及分析.第3部分:分析方法.第40節:多元素法.電感耦合等離子體原子發射光譜分析法測 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Multi-element methods - Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method - General requirements and sample dissolution |
| BS 6200-3.40.2-1997 | 鋼、鐵和其他黑色金屬取樣及分析.第3部分:分析方法.第40節:多元素法.電感耦合等離子體原子發射光譜分析法測 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Multi-element methods - Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method - Determination of nickel content |
| BS 6200-3.40.3-1997 | 鋼、鐵和其他含鐵金屬取樣及分析.第3部分:分析方法.第40節:多元素法.電感耦合等離子體原子發射光譜分析法測 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Multi-element methods - Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method - Determination of copper content |
| BS 6200-3.40.4-1997 | 鋼、鐵和其他含鐵金屬取樣及分析.第3部分:分析方法.第40節:多元素法.電感耦合等離子體原子發射光譜分析法測 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Multi-element methods - Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method - Determination of cobalt content |
| BS 6783-1-1986 | 鎳、鎳鐵和鎳合金的取樣與分析.采用火焰原子吸收光譜法對鎳中銀、鉍、鎘、鈷、銅、鐵、錳、鉛和鋅的測定方 | Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of silver, bismuth, cadmium, cobalt, copper, iron, manganese, lead and zinc in nickel by flame atomic absorption spectrometry |
| BS 6783-3-1986 | 鎳、鎳鐵和鎳合金的取樣與分析.第3部分:采用火焰原子吸收光譜法鎳鐵中鈷的測定方法 | Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of cobalt in ferronickel by flame atomic absorption spectrometry |
| BS 7252-12-1997 | 外科植物入用金屬材料.第12部分:煅制鈷-鉻-鉬合金規范 | Metallic materials for surgical implants - Specification for wrought cobalt-chromium-molybdenum alloy |
| BS 7252-4-1997 | 外科植入物用金屬材料.第4部分:鈷-鉻-鉬鑄造合金規范 | Metallic materials for surgical implants - Specification for cobalt-chromium-molybdenum casting alloy |
| BS 7252-6-1997 | 外科植入物用金屬材料.可鍛鈷-鎳-鉻-鉬合金規范 | Metallic materials for surgical implants - Specification for wrought cobalt-nickel-chromium-molybdenum alloy |
| BS 7252-7-1994 | 外科植入物用金屬材料.第7部分:鈷-鉻-鎳-鉬-鐵合金規范 | Metallic materials for surgical implants - Specification for cobalt-chromium-nickel-molybdenum-iron alloy |
| BS 7252-8-1997 | 外科植入物用金屬材料.可鍛鈷-鎳-鉻-鉬-鎢-鐵合金規范 | Metallic materials for surgical implants - Specification for wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy |
| BS 7254-5-1990 | 矯形外科植入物.第5部分:鈷-鉻-鉬合金制鑄件的生產規范 | Orthopaedic implants - Specification for production of castings made of cobalt-chromium-molybdenum alloy |
| BS 7317-1-1990 | 高純度銅陰極Cu-CATH-1分析方法.第1部分:采用原子吸收分光光度法對鎘、錳和銀(鉻,鈷,鐵,鎳和鋅的篩選程序) | Methods for analysis of high purity copper cathode Cu-CATH-1 - Method for determination of cadmium, manganese and silver (screening procedure for chromium, cobalt, iron, nickel and zinc) by atomic absorption spectrophotometry |
| BS 7317-2-1990 | 高純度銅陰極Cu-CATH-1分析方法.第2部分:采用不連續體積噴霧原子吸收分光光度法對鉻、鈷、鐵、鎳和鋅的測定 | Methods for analysis of high purity copper cathode Cu-CATH-1 - Method for determination of chromium, cobalt, iron, nickel and zinc by discrete volume nebulization atomic absorption spectrophotometry |
| BS 7455-2-1991 | 采用火焰原子吸收光譜測定法對鎳合金的分析.鈷的測定方法 | Analysis of nickel alloys by flame atomic absorption spectrometry - Method for the determination of cobalt |
| BS 7755-3.13-1998 | 土質.化學方法.土壤的王水萃取物中鎘、鉻、鈷、銅、鉛、錳、鎳和鋅含量測定.火焰和電熱原子吸收光譜測定法 | Soil quality - Chemical methods - Determination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc in aqua regia extracts of soil - Flame and electrothermal atomic absorption spectrometric methods |
| BS DD CEN/TS 15621-2007 | 動物飼料.用電感耦合等離子體發射光譜法(ICP-AES)測定鈣、鈉、磷、鎂、鉀、硫、鐵、鋅、銅、猛、鈷和鉬含量 | Animal feeding stuffs - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese, cobalt and molybdenum after pressure digestion by ICP-AES |
| BS EN 10302-2008 | 耐蠕變的鋼、鎳和鈷合金 | Creep resisting steels, nickel and cobalt alloys |
| BS EN 14941-2006 | 銅和銅合金.測定鈷含量.FAAS法 | Copper and copper alloys - Determination of cobalt content - FAAS method |
| BS EN 15510-2007 | 動物飼料.用電感耦合等離子體發射光譜法(ICP-AES)測定鈣、鈉、磷、鎂、鉀、鐵、鋅、銅、猛、鈷、鉬、砷、鉛 | Animal feeding stuffs — Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum, arsenic, lead and cadmium by ICP-AES |
| BS EN 2103-1-1992 | 鋼、鎳基合金及鈷基合金重熔坯料和鑄件.技術規范.一般要求 | Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - General requirements |
| BS EN 2103-2-1992 | 鋼、鎳基合金及鈷基合金重熔坯料和鑄件.技術規范.重熔坯料 | Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - Remelting stock |
| BS EN 2103-3-1992 | 鋼、鎳基合金及鈷基合金重熔坯料和鑄件.技術規范.試制鑄件和產品鑄件 | Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - Pre-production and production castings |
| BS EN 23909-1994 | 硬質合金.鈷含量測定.電位滴定法 | Hardmetals - Determination of cobalt - Potentiometric method |
| BS EN 27627-3-1993 | 硬質合金.用火焰原子吸收光譜法進行化學分析.0.01-0.5%(m/m)含量中鈷、鐵、錳和鎳的測定 | Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m) |
| BS EN 27627-5-1993 | 硬質合金.用火焰原子吸收光譜法進行化學分析.0.5-2%(m/m)含量中鈷、鐵、錳、鉬、鎳、鈦和釩的測定 | Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m) |
| BS EN 3959-2001 | 航空航天系列.鈷基合金CO-B41601(CoCr19Ni17Si8W4).硬釬焊填充金屬.粉末或糊料 | Aerospace series - Cobalt base alloy CO-B41601 (CoCr19Ni17Si8W4) - Filler metal for brazing - Powder or paste |
| BS EN ISO 6271-1-2004 | 透明液體.用鉑-鈷色標評定色度.觀測法 | Clear liquids - Estimation of colour by the platinum-cobalt scale - Visual method |
| BS EN ISO 6271-2-2004 | 透明液體.用鉑-鈷色標評定色度.光譜測定法 | Clear liquids - Estimation of colour by the platinum-cobalt scale - Spectrophotometric method |
| BS HC 100-1972 | 鐵、鎳、銅、鈷和難熔金屬基合金鑄件的檢驗和試驗程序 | Inspection and testing procedure for iron, nickel, copper, cobalt and refractory metal base alloy castings |
| BS HC 205-1974 | 沉淀硬化鎳基鉻-鈷-鉬-鈦合金鑄件規范(鉻20、鈷20、鉬6、鈦2 | Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy castings (Cr 20, Co 20, Mo 6, Ti 2) |
| BS HC 206-1975 | 沉淀硬化鎳基鉻-鈷-鉬-鈦合金精密鑄件規范(鉻20、鈷20、鉬6、鈦2) | Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy precision castings (Cr 20, Co 20, Mo 6, Ti 2) |
| BS HC 301-1973 | 鈷基鉻-鎳-鎢合金鑄件規范(鉻25.5、鎳10.5、鎢7.5) | Specification for cobalt base chromium-nickel-tungsten alloy castings (Cr 25.5, Ni 10.5. W 7.5) |
| BS HR 10-1972 | 鎳-鈷-鉻-鉬-鈦-鋁耐合金坯錠、棒材、鍛件和零件(鎳基、Co20、Cr20、Mo5.9、Ti2.1、Al0.5)規范 | Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) |
| BS HR 204-1972 | 鎳-鉻-鐵-鉬-鈷-鎢耐熱合金板材,薄板材和帶材(鎳基、Cr22、Fe18.5、Mo9、Co1.5、W0.6)規范 | Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base Cr 22, Fe 18.5, Mo 9, Co 1.5, W 0.6) |
| BS HR 206-1973 | 鎳-鈷-鉻-鉬-鈦-鋁耐熱合金板材、薄板材和帶材(鎳基、Co20、Cr20、Mo5.9、Ti2.1、Al0.5)規范 | Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) |
| BS HR 209-1989 | 鎳-鉻-鈷-鉬-鈦-鋁耐熱合金薄板材、帶材和板材:軟化的(鎳基、Cr18、Co14、 Mo7、Ti2.2、Al2.1)規范 | Specification for nickel-chromium-cobalt-molybdenum-titanium-aluminium heat-resisting alloy sheet, strip and plate: softened (nickel base, Cr 18, Co 14, Mo 7, Ti 2.2, Al 2.1) |
| BS HR 240-1972 | 鈷-鉻-鎢-鎳-錳耐熱合金厚板材、薄板材和帶材(鈷基、Cr20、W15、Ni10、Mn1.5)規范 | Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy plate, sheet and strip (cobalt base Cr 20, W 15, Ni 10, Mn 1.5) |
| BS HR 3-1972 | 鎳-鈷-鉻-鉬-鈦-鋁耐熱合金坯錠、棒材、鍛件和部件規范(鎳基、Co20、Cr14.8、Mo05、Al4.7、Ti1.2) | Specification for nickel-cobalt-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 14. 8, Mo 5, Al 4.7, Ti 1.2) |
| BS HR 4-1972 | 鎳-鉻-鈷-鋁-鉬-鈦耐熱合金坯錠、棒材、鍛件和部件規范(鎳基Cr 15、Co 14.2、Al 5、Mo 4、Ti 4) | Specification for nickel-chromium-cobalt-aluminium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 15, Co 14. 2, Al 5, Mo 4, Ti 4) |
| BS HR 40-1972 | 鈷-鉻-鎢-鎳-錳耐合金坯錠、棒材、鍛件和零件(鎳基、Cr20、W15、Ni10、Mn1.5)規范 | Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy billets, bars and forgings (cobalt base, Cr 20, W 15, Ni 10, Mn 1.5) |
| BS HR 402-1973 | 冷加工和軟化的無縫鎳鉻鈷鈦鋁耐熱合金管(鎳基、Cr19.5、Co18.0、Ti2.5、Al1.5)規范 | Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold worked and softened seamless tubes (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) |
| BS HR 404-1973 | 冷加工溶液處理的無縫鎳鈷鉻鉬鈦鋁耐熱合金管(鎳基、Co20、Cr20、Mo5.9、Ti2.1、Al0.5)規范 | Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy cold worked solution treated seamless tubes (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) |
| BS HR 506-1989 | 鎳-鉻-鈷-鈦-鋁耐熱合金線材:軟化的(鎳基、Cr19.5、Co1.8、Ti2.5、Al1.5)規范 | Nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire: softened (Nickel base, Cr 19.5, Co 18, Ti 2.5, Al 1.5) |
| BS HR 6-1972 | 鎳-鉻-鐵-鉬-鈷-鎢耐合金坯錠、棒材、鍛件和零件(鎳基、Cr21.7、Fe18.5、Mo9、Co1.5、W0.6)規范 | Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6) |
| BS ISO 11533-1996 | 鐵礦石.鈷含量測定.火焰原子吸收光譜測定法 | Iron ores - Determination of cobalt content - Flame atomic absorption spectrometric method |
| BS ISO 11873-2005 | 硬質合金.鈷金屬粉末中硫和碳含量的測定.紅外線探測法 | Hardmetals - Determination of sulfur and carbon contents in cobalt metal powders - Infrared detection method |
| BS ISO 11877-2008 | 硬金屬.鈷金屬合金粉末中硅的測定.光度測定法 | Hardmetals - Determination of silicon in cobalt metal powders - Photometric method |
| BS ISO 16468-2005 | 熔模鑄件(鋼、鎳合金和鈷合金).一般技術要求 | Investment castings (steel,nickel alloys and cobalt alloys) - General technical requirements |
| BS ISO 17352-2008 | 硬金屬.使用石墨爐原子吸收法測定鈷金屬粉末中的硅 | Hardmetals - Determination of silicon in cobalt metal powders using graphite-furnace atomic absorption |
| BS ISO 19959-2005 | 熔模鑄件表面情況的外觀檢驗.鋼、鎳合金和鈷合金 | Visual examination of the surface condition of investment castings - Steel, nickel alloys and cobalt alloys |
| BS ISO 23470-2007 | 土質.用三氯六氨基鈷溶液測定有效陽離子交換能力(CEC)和可交換的陽離子 | Soil quality - Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexamminecobalt trichloride solution |
| BS L 119-1975 | 鋁-銅(5.0)-鎳(1.5)-錳(0.5)-鈦(0.2)-鋯(0.2)-鈷(0.2)-銻(0.2)合金鑄錠和鑄件規范(溶液處理和人工時效) | Specification for ingots and castings of aluminium-copper-nickel-manganese-titanium-zirconium-cobalt-antimony alloy (solution treated and artificially aged) (Cu 5.0, Ni 1.5, Mn 0.25, Ti 0.2, Zr 0.2, Co 0.2, Sb 0.2) |
| BS S 152-1975 | 鉻-鈷-鉬-釩-鈮耐熱鋼坯、棒材、鍛件及零件規范(自耗電極重熔)(1000-1140MPa)(鉻10.5、鈷6、鉬0.8、釩0.2、 | Specification for chromium-cobalt-molybdenum-vanadium-niobium heat-resisting steel billets, bars, forgings and parts (consumable electrode remelted) (1000-1140 MPa) (Cr 10.5, Co 6, Mo 0.8, V 0.2, Nb 0.3) |
| BS S 162-1990 | 鍛坯、鍛件、棒材和零件用18%鎳-鈷-鉬馬氏體時效鋼(1800MPa:雙倍真空熔化)規范 | Specification for 18% nickel-cobalt-molybdenum maraging steel forging stock, forgings, bars and parts (1800 MPa: double vaccuum melted) |
| DD CEN/TS 15621-2007 | 動物飼料.壓力溶解后鈣、鈉、磷、鎂、鉀、硫、鐵、鋅、銅、錳、鈷和鉬元素的測定 | Animal feeding stuffs — Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese, cobalt and molybdenum after pressure digestion by ICP-AES |
| 編號 | 中文名稱 | 英文名稱 |