| 編號 | 中文名稱 | 英文名稱 |
|---|
| ANSI MH5.1.1.5-1990
| 貨運集裝箱.公路/鐵路封閉式干燥運貨集裝箱
| Freight Containers - Road/Rail Dry Van Containers
|
| ANSI MH5.1.9-1990
| 貨運集裝箱.自動識別
| Freight Containers - Automatic Identification
|
| ANSI MH5.3M-1982
| 貨運集裝箱的識別和標志
| Specifications for identification and marking of cargo containers
|
| ANSI MH5.6-1990
| 貨運集裝箱底盤.基本接口的要求
| Cargo Container Chassis - Basic Interface Requirements
|
| ANSI/ADA 109-2006
| 存放牙科汞合金廢料法和汞合金廢料儲存/船載集裝箱要求
| Procedures for Storing Dental Amalgam Waste and Requirements for Amalgam Waste Storage/Shipment Containers
|
| ANSI/ASTM F1018-1987
| 鋼制應急齒輪裝載集裝箱規范
| Specification for Steel Emergency Gear Stowage Locker
|
| ANSI/EIA 556-B-1999
| 電子學.外運集裝箱外部條碼標簽標準
| Electronics - Outer Shipping Container Bar Code Label Standard
|
| ANSI/EIA-556-B-1999
| 電子學.運輸集裝箱外部條形碼標簽標準
| Electronics - Outer Shipping Container Bar Code Label Standard
|
| ASTM D 1083-1991
| 集裝箱、大型船運箱和板條箱的機械搬運的試驗方法
| Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates
|
| ASTM D 4003-1998
| 船運集裝箱及系統可程控的水平?jīng)_擊試驗的試驗方法
| Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
|
| ASTM D 4169-2005
| 運輸集裝箱和設備性能試驗的標準實施規程
| Standard Practice for Performance Testing of Shipping Containers and Systems
|
| ASTM D 4279-1995
| 用固定法和周期法測試航運集裝箱水蒸氣透過性的標準試驗方法
| Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods
|
| ASTM D 4577-2005
| 長期負載下集裝箱耐壓性的標準試驗方法
| Standard Test Method for Compression Resistance of a Container Under Constant Load
|
| ASTM D 4728-2006
| 海運集裝箱隨機振動檢測的標準試驗方法
| Standard Test Method for Random Vibration Testing of Shipping Containers
|
| ASTM D 5168-2003
| 三層波紋纖維板集裝箱的制造和封閉的標準操作規程
| Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
|
| ASTM D 5276-1998
| 自由下落情況下滿載的集裝箱作落體試驗的標準試驗方法
| Standard Test Method for Drop Test of Loaded Containers by Free Fall
|
| ASTM D 642-2000
| 確定船用集裝箱、組合件和單體加載的抗壓縮能力的標準試驗方法
| Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads
|
| ASTM D 782-1982
| 在回轉六角鼓中作船運集裝箱試驗
| Testing Shipping Containers in Revolving Hexagonal Drum
|
| ASTM D 880-1992
| 船用集裝箱的沖擊試驗的試驗方法
| Test Method for Impact Testing for Shipping Containers and Systems
|
| ASTM D 951-1999
| 用噴射法測定船運集裝箱耐水性的標準試驗方法
| Standard Test Method for Water Resistance of Shipping Containers by Spray Method
|
| ASTM D 999-2007
| 集裝箱振動測試的標準試驗方法
| Standard Test Methods for Vibration Testing of Shipping Containers
|
| 編號 | 中文名稱 | 英文名稱 |
|---|