編號 | 中文名稱 | 英文名稱 |
IEC 61340-4-4-2005
| 靜電學.第4-4部分:專用的標準試驗方法.柔性中間散貨集裝箱(FIBC)的靜電學分類
| Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)
|
ISO 10327-1995
| 航空器 航空貨運用合格的航空集裝箱 規范和試驗
| Aircraft - Certified aircraft container for air cargo - Specification and testing
|
ISO 10368-2006
| 貨物保溫集裝箱.遠程調節監控
| Freight thermal containers - Remote condition monitoring
|
ISO 10374 AMD 1-1995
| 集裝箱 自動識別 修改1
| Freight containers - Automatic identification; Amendment 1
|
ISO 10374-1991
| 集裝箱 自動識別
| Freight containers; automatic identification
|
ISO 10525-1997
| 6m及6m以上長度平衡重式貨運集裝箱搬運車 附加穩定性試驗
| Counterbalanced trucks handling freight containers of 6 m (20 ft) length and above - Additional stability tests
|
ISO 11242-1996
| 航空器 貨運集裝箱壓力均衡要求
| Aircraft - Pressure equalization requirements for cargo containers
|
ISO 1161 AMD 1-2007
| 貨運集裝箱系列1.角配件.規范.修改件1:45ft集裝箱
| Series 1 freight containers - Corner fittings - Specification; Amendment 1: 45 ft containers
|
ISO 1161 Technical Corrigendum 1-1990
| 系列1集裝箱 角件 技術要求 技術勘誤1
| Series 1 freight containers; corner fittings; specification; technical corrigendum 1
|
ISO 1161-1984
| 系列1集裝箱 角件 技術要求
| Series 1 freight containers; Corner fittings; Specification
|
ISO 13562-2-2001
| 伸縮臂式工業車輛 第2部分:6m及以上長度貨運集裝箱叉車附加穩定性試驗
| Industrial variable-reach trucks - Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above
|
ISO 13563-2-2001
| 單邊負載叉車 第2部分:搬運6m及以上長度集裝箱的叉車的附加穩定性試驗
| Single side loading fork-lift trucks - Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above
|
ISO 14829-2002
| 貨運集裝箱.貨運集裝箱搬運用跨運車.穩定性的計算
| Freight containers - Straddle carriers for freight container handling - Calculation of stability
|
ISO 1496-1 AMD 1-1993
| 系列1集裝箱 技術要求與試驗 第1部分:一般用途通用貨物集裝箱 修改1:1AAA和1BBB型集裝箱
| Series 1 freight containers; specification and testing; part 1: general cargo containers for general purposes; amendment 1: 1AAA and 1BBB containers
|
ISO 1496-1 AMD 2-1998
| 系列1集裝箱 技術要求與試驗 第1部分:一般用途通用貨物集裝箱 修改2
| Series 1 freight containers - Specification and testing - Part 1: General cargo containers for general purpose; Amendment 2
|
ISO 1496-1 AMD 3-2005
| 系列1集裝箱.規范和試驗.第1部分:一般用途通用貨物集裝箱.修改件3
| Series 1 freight containers - Specification and testing - Part 1: General cargo containers for general purposes; Amendment 3
|
ISO 1496-1 AMD 4-2006
| 系列1貨運集裝箱.規范和試驗.第1部分:一般用途的貨運集裝箱.修改件4
| Series 1 freight containers - Specification and testing - Part 1: General cargo containers for general purposes; Amendment 4
|
ISO 1496-1 AMD 5-2006
| 系列1集裝箱.技術要求與試驗.第1部分:一般用途通用貨物集裝箱.修改件5:門端安全性
| Series 1 freight containers - Specification and testing - Part 1: General cargo containers for general purposes; Amendment 5: Door end security
|
ISO 1496-1-1990
| 系列1集裝箱 技術要求與試驗 第1部分:一般用途通用貨物集裝箱
| Series 1 freight containers; specification and testing; part 1: general cargo containers for general purposes
|
ISO 1496-2 AMD 1-2006
| 系列1集裝箱.技術要求與試驗.第2部分:保溫集裝箱.修改件1
| Series 1 freight containers - Specification and testing - Part 2: Thermal containers; Amendment 1
|
ISO 1496-2 Technical Corrigendum 1-1997
| 系列1集裝箱.技術要求與測試.第2部分:保溫集裝箱.技術勘誤1
| Series 1 freight containers - Specification and testing - Part 2: Thermal containers; Technical Corrigendum 1
|
ISO 1496-2-1996
| 系列1集裝箱 技術要求與試驗 第2部分:保溫集裝箱
| Series 1 freight containers - Specification and testing - Part 2: Thermal containers
|
ISO 1496-3 AMD 1-2006
| 貨運集裝箱系列1.規范和試驗.第3部分:液體、氣體和加壓的干散料用液罐集裝箱.修改件1:外部限制(縱向)動態試
| Series 1 freight containers - Specification and testing - Part 3: Tank containers for liquids, gases and pressurized dry bulk; Amendment 1: Testing of the external restraint (longitudinal) dynamic
|
ISO 1496-3-1995
| 系列1集裝箱 技術要求與試驗 第3部分:液體、氣體及加壓干散貨用罐式集裝箱
| Series 1 freight containers - Specification and testing - Part 3: Tank containers for liquids, gases and pressurized dry bulk
|
ISO 1496-4 AMD 1-1994
| 系列1集裝箱 技術要求與試驗 第4部分:無壓干散貨集裝箱 修改1:1AAA和1BBB型集裝箱
| Series 1 freight containers - Specification and testing - Part 4: Non-pressurized containers for dry bulk; Amendment 1: 1AAA and 1BBB containers
|
ISO 1496-4 Technical Corrigendum 1-2006
| 系列1集裝箱.技術要求與試驗.第4部分:不加壓的干散料集裝箱
| Series 1 freight containers - Specification and testing - Part 4: Non-pressurized containers for dry bulk
|
ISO 1496-4-1991
| 系列1集裝箱 技術要求與試驗 第4部分:無壓干散貨集裝箱
| Series 1 freight containers; specification and testing; part 4: non-pressurized containers for dry bulk
|
ISO 1496-5 AMD 1-1993
| 系列1集裝箱 技術要求與試驗 第5部分:平臺式和臺架式集裝箱 修改1
| Series 1 freight containers; specification and testing; part 5: platform and platform-based containers; amendment 1: 1AAA and 1BBB containers
|
ISO 1496-5 AMD 2-1994
| 貨運集裝箱系列1.規范和試驗.第5部分:平臺式和臺架式集裝箱.修改件2
| Serie 1 freight containers - Specification and testing - Part 5: Platform and platform-based containers; Amendment 2
|
ISO 1496-5-1991
| 系列1集裝箱 技術要求與試驗 第5部分:平臺式和臺架式集裝箱
| Series 1 freight containers; specification and testing; part 5: platform and platform-based containers
|
ISO 15871-2000
| 工業車輛 集裝箱搬運和抓斗臂操作用指示燈規范
| Industrial trucks - Specification for indicator lights for container handling and grappler arm operations
|
ISO 17363-2007
| RFID供應鏈應用.貨運集裝箱
| Supply chain applications of RFID - Freight containers
|
ISO 18185-1-2007
| 貨運集裝箱.電子密封.第1部分:通信協議
| Freight containers - Electronic seals - Part 1: Communication protocol
|
ISO 18185-2-2007
| 貨運集裝箱.電子密封.第2部分:應用要求
| Freight containers - Electronic seals - Part 2: Application requirements
|
ISO 18185-3-2006
| 貨運集裝箱.電子密封.第3部分:環境特征
| Freight containers - Electronic seals - Part 3: Environmental characteristics
|
ISO 18185-4-2007
| 貨運集裝箱.電子密封.第4部分:數據保護
| Freight containers - Electronic seals - Part 4: Data protection
|
ISO 18185-5-2007
| 貨運集裝箱.電子密封.第5部分:物理層
| Freight containers - Electronic seals - Part 5: Physical layer
|
ISO 21898-2004
| 包裝.非危險貨物用軟的過渡性散貨集裝箱
| Packaging - Flexible intermediate bulk containers (FIBCs) for non-dangerous goods
|
ISO 2308-1972
| 起重能力30噸以下的貨運集裝箱吊鉤 基本要求
| Hooks for lifting freight containers of up to 30 tonnes capacity; Basic requirements
|
ISO 3874 AMD 1-2000
| 系列1集裝箱 裝卸與加固 修改1
| Series 1 freight containers - Handling and securing; Amendment 1: Twistlocks, latchlocks, stacking fittings and lashing rod systems for securing of containers
|
ISO 3874 AMD 2-2002
| 貨運集裝箱系列1.搬運和固定.第2次修改:1AAA和1BBB集裝箱
| Series 1 freight containers - Handling and securing; Amendment 2: Vertical tandem lifting
|
ISO 3874 AMD 3-2005
| 系列1集裝箱.裝卸與加固.修改件3:雙垛軌道車操作
| Series 1 freight containers - Handling and securing; Amendment 3: Double stack rail car operations
|
ISO 3874 AMD 4-2007
| 貨運集裝箱系列1.搬運和固定.修改件4:45ft集裝箱
| Series 1 freight containers - Handling and securing - Amendment 4: 45 ft Containers
|
ISO 3874-1997
| 系列1集裝箱 裝卸與加固
| Series 1 freight containers - Handling and securing
|
ISO 4118-2005
| 空運貨物.用于大容量飛行器底艙的非適航審定的集裝箱.規范和試驗
| Air cargo - Non-certified containers for the lower deck of large-capacity aircraft - Specification and testing
|
ISO 4128-1985
| 航空器 按空運標準型式制造的集裝箱
| Aircraft; Air mode modular containers
|
ISO 6346-1995
| 集裝箱 代碼、識別和標記
| Freight containers - Coding, identification and marking
|
ISO 6359-1982
| 貨運集裝箱.數據摘要板
| Freight containers; Consolidated data plate
|
ISO 6517-1992
| 航空貨運設備 大型飛機底艙專用并經合格審定的基座固定的集裝箱
| Air cargo equipment; base-restrained certified containers exclusively for the lower deck of high-capacity aircraft
|
ISO 668 AMD 1-2005
| 貨運集裝箱系列1.分類、尺寸和容量.修改件1
| Series 1 freight containers - Classification, dimensions and ratings; Amendment 1
|
ISO 668 AMD 2-2005
| 貨運集裝箱系列1.分類、尺寸和額定容量.修改件2:45' 集裝箱
| Series 1 freight containers - Classification, dimensions and ratings; Amendment 2: 45' containers
|
ISO 668-1995
| 系列1集裝箱 分類、尺寸和額定值
| Series 1 freight containers - Classification, dimensions and ratings
|
ISO 6965-1982
| 航空器 裝吊航空貨運集裝箱和大件貨物的自行式龍門起重機 功能要求
| Aircraft; Self-propelled gantry for lifting air cargo containers and outsize cargoes; Functional requirements
|
ISO 8058-1999
| 航空貨運 隔熱集裝箱 熱效率要求
| Air cargo - Insulated container - Thermal efficiency requirements
|
ISO 830 Technical Corrigendum 1-2001
| 集裝箱 詞匯 兩種語言版 技術勘誤1
| Freight containers - Vocabulary; Technical corrigendum 1
|
ISO 830-1999
| 集裝箱.詞匯
| Freight containers - Vocabulary
|
ISO 8323-1985
| 集裝箱 空/陸/水(聯運)通用集裝箱 技術要求與試驗
| Freight containers; Air/surface (intermodal) general purpose containers; Specification and tests
|
ISO 9669 AMD 1-1992
| 系列1集裝箱 罐式集裝箱接口 修改1:3節和4節
| Series 1 freight containers; interface connections for tank containers; amendment 1: sections 3 and 4
|
ISO 9669-1990
| 系列1集裝箱 罐式集裝箱接口
| Series 1 freight containers; interface connections for tank containers
|
ISO 9711-1-1990
| 集裝箱 與船載集裝箱有關的信息 第1部分:箱位坐標
| Freight containers; information related to containers on board vessels; part 1: bay plan system
|
ISO 9897 Technical Corrigendum 1-2001
| 集裝箱 集裝箱設備的數據交換(CECEX):一般通訊代碼 技術勘誤1
| Freight containers - Container equipment data exchange (CEDEX) - General communication codes; Technical Corrigendum 1
|
ISO 9897-1997
| 集裝箱 集裝箱設備的數據交換(CECEX):一般通訊代碼
| Freight containers - Container equipment data exchange (CEDEX) - General communication codes
|
ISO/PAS 17712-2006
| 貨運集裝箱.機械密封
| Freight containers - Mechanical seals
|
ISO/TR 15069-1997
| 系列1集裝箱 裝卸與加固 ISO 3874 附錄A的基本原理
| Series 1 freight containers - Handling and securing - Rationale for ISO 3874 Annex A
|
ISO/TR 15070 AMD 1-2005
| 系列1集裝箱 結構檢驗標準的基本原理.修改件1:結構一體化指南
| Series 1 freight containers - Rationale for structural test criteria; Amendment 1: Guidance on structural integrity
|
ISO/TR 15070 AMD 2-2007
| 貨運集裝箱系列1.結構試驗標準的基本原理.修改件2
| Series 1 freight containers - Rationale for structural test criteria; Amendment 2
|
ISO/TR 15070-1996
| 系列1集裝箱 結構檢驗標準的基本原理
| Series 1 freight containers - Rationale for structural test criteria
|
編號 | 中文名稱 | 英文名稱 |