| 編號 | 中文名稱 | 英文名稱 |
|---|
| ANSI/ASTM D1039-1999
| 用作電絕緣材料的玻璃粘合云母的測試方法 (10.01)
| Method of Testing Glass-Bonded Mica Used as Electrical Insulation (10.01)
|
| ANSI/ASTM D1389-1998
| 薄壁固體電絕緣材料的耐電壓檢測的試驗方法
| Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
|
| ANSI/ASTM D149-1995
| 固體電絕緣材料在工業用電頻率下的介電擊穿電壓和介電強度的試驗方法(10.01)
| Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies (10.01)
|
| ANSI/ASTM D149a-1997
| 固體電絕緣材料在工業電源頻率下的介電擊穿電壓和介電強度的試驗方法
| Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies (10.01)
|
| ANSI/ASTM D150-1998
| 實心電絕緣材料的交流損耗特性和電容率(介電常數)的試驗方法
| Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials
|
| ANSI/ASTM D1822-1999
| 塑料和電絕緣材料破壞拉伸沖擊力測試方法
| Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
|
| ANSI/ASTM D1825-2003
| 電氣試驗用鍍銅電絕緣材料及熱固性疊層板材的浸蝕和清洗的實施規程
| Practice for Etching and Cleaning Copper-Clad Electrical Insulating Materials and Thermosetting Laminates for Electrical Testing
|
| ANSI/ASTM D2132-2003
| 電絕緣材料的塵霧痕跡和耐腐蝕的試驗方法
| Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
|
| ANSI/ASTM D2275-2001
| 表面經過部分放電的固體電絕緣材料電壓耐久性測試方法(10.01)
| Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface (10.01)
|
| ANSI/ASTM D2303-1997
| 絕緣材料液體污染、斜面漏電痕跡和侵蝕的試驗方法
| Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials
|
| ANSI/ASTM D2304-1997
| 剛性電絕緣材料耐熱性試驗方法
| Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
|
| ANSI/ASTM D2520-2001
| 微波頻率和溫度為1650℃時實心電絕緣材料綜合介電常數測試驗方法(10.02)
| Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperature to 1, 650°C (10.02)
|
| ANSI/ASTM D256-1993
| 塑料及電絕緣材料抗沖擊性試驗方法
| Test Methods for Impact Resistance of Plastics and Electrical Insulating Materials (08.01, 09.02)
|
| ANSI/ASTM D257-1999
| 絕緣材料直流電阻或?qū)щ娦栽囼?yàn)方法
| Test Methods for DC Resistance or Conductance of Insulating Materials
|
| ANSI/ASTM D2655-2000
| 額定電壓達到2000伏的電線和電纜交聯聚乙烯絕緣材料規范(10.02)
| Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V
|
| ANSI/ASTM D2656-2000
| 額定電壓2001V到35V的電線和電纜交聯聚乙烯絕緣材料規范(10.02)
| Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35V (10.02)
|
| ANSI/ASTM D2770-2001
| 電線及電纜用耐臭氧乙丙橡膠整體絕緣材料及套管規范
| Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable
|
| ANSI/ASTM D2802-2003
| 電線和電纜用耐臭氧乙丙橡膠絕緣材料規范
| Specification for Ozone-Resistant Ethylene-Propylene Rubber Insulation for Wire and Cable
|
| ANSI/ASTM D2865-2001
| 電絕緣材料試驗用標準和設備的校正慣例(10.02)
| Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing (10.02)
|
| ANSI/ASTM D3151-1988
| 靜電應力下的固態電絕緣材料的熱損傷的試驗方法
| Test Method for Thermal Failure of Solid Electrical Insulating Materials Under Electric Stress
|
| ANSI/ASTM D3386-2005
| 電絕緣材料線性熱膨脹系數的試驗方法
| Test Method for Coefficient of Linear Thermal Expansion of Electrical Insulating Materials
|
| ANSI/ASTM D3426-1995
| 用沖擊波測定電氣固體絕緣材料的電介質擊穿電壓和介電強度的試驗方法(10.02)
| Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves (10.02)
|
| ANSI/ASTM D3636-2006
| 固體電絕緣材料的取樣及質量評定的實施
| Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
|
| ANSI/ASTM D3638-1993
| 電絕緣材料的比較跟蹤系數的試驗方法
| Test Method for Comparative Tracking Index of Electrical Insulating Materials
|
| ANSI/ASTM D374M-1999
| 固體電絕緣材料厚度的試驗方法(米制)
| Test Methods for Thickness of Solid Electrical Insulation (Metric) (10.01)
|
| ANSI/ASTM D3755-1997
| 直流電壓應力下電氣絕緣材料的介電擊穿電壓和介電強度的試驗方法
| Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Electrical Insulating Materials Under Direct-voltage Stress
|
| ANSI/ASTM D3850-1994
| 熱解重量分析儀法對固體電絕緣材料快速熱降解的試驗方法
| Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method (TGA)
|
| ANSI/ASTM D470-2005
| 電線和電纜用交聯絕緣材料和護套的試驗方法(10.01)
| Methods of Testing Crosslinked Insulations and Jackets for Wire and Cable (10.01)
|
| ANSI/ASTM D5288-1997
| 使用多種電極材料(不包括鉑)測定電絕緣材料漏電痕跡指數的試驗方法
| Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
|
| ANSI/ASTM D5537-2003
| 電纜或光纜絕緣材料在立式電纜槽裝置中燃燒時熱發散、火焰?zhèn)鞑ズ唾|(zhì)量損失測試的試驗方法
| Test Method for Heat Release, Flame Spread and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
|
| ANSI/ASTM D6054-1997
| 試驗用電絕緣材料狀態調節的規程
| Practice for Conditioning Electrical Insulating Materials for Testing
|
| ANSI/ASTM D6097-2001
| 固體電介絕緣材料有孔水柱增高表示相對抗性的試驗方法
| Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
|
| ANSI/ASTM D6097a-2001
| 固體介電絕緣材料對應通氣孔水柱上升的電阻力測試方法
| Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
|
| ANSI/ASTM D6113-2003
| 使用錐形量熱計對電氣或光纖電纜含的絕緣材料的著火試驗反應特性進行測定的標準試驗方法
| Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
|
| ANSI/ASTM D618-1995
| 測試用電絕緣材料和調理塑料材料的實施規程
| Practice for Conditioning Plastics and Electrical Insulating Materials for Testing (08.01)
|
| ANSI/ASTM D6272-2000
| 利用四點結合法進行非增強和增強塑料及電氣絕緣材料的柔韌性試驗方法
| Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
|
| ANSI/ASTM D785-1998
| 塑料及電絕緣材料洛氏硬度測試方法(08.01)
| Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials (08.01)
|
| ANSI/ICEA T-28-562-2003
| 測量聚合物絕緣材料熱蠕變性的試驗方法
| Test Method For Measurement of Hot Creep of Polymeric Insulations
|
| ANSI/IEEE 98-2002
| 固體電絕緣材料熱評價用試驗程序的編制
| Thermal Evaluation of Solid Electrical Insulating Materials, Preparation of Test Procedures for the
|
| ANSI/IPC 4202-2002
| 柔性印制線路用柔性裸絕緣材料
| Flexible Bare Dielectrics for Use in Flexible Printed Wiring
|
| ANSI/IPC 4204-2002
| 制備柔性印制線路用的涂柔性金屬的絕緣材料
| Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Wiring
|
| ANSI/NFPA 274-2003
| 管道絕緣材料燃燒特性評價的標準試驗方法
| Standard Test Method to Evaluate Fire Performance Characteristics of Pipe Insulation
|
| ANSI/SAE J1351-1993
| 絕緣材料的加熱氣味的試驗
| Insulation Materials, Hot Odor Test for
|
| ANSI/SAE J1389-1993
| 絕緣材料的腐蝕試驗
| Corrosion Test for Insulation Materials
|
| ANSI/SCTE 12-2001
| 干線、饋電和配電同軸電纜中間導線與絕緣材料的粘接
| Center Conductor Bond to Dielectric for Trunk, Feeder and Distribution Coaxial Cables
|
| ANSI/SCTE 13-2001
| 干線、饋電和配電同軸電纜用絕緣材料漏汽試驗方法
| Dielectric Air Leakage Test Method For Trunk, Feeder and Distribution Coaxial Cable
|
| ASTM C 1014-2003
| 噴施的礦物纖維吸熱和吸音絕緣材料標準規范
| Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
|
| ASTM C 1029a-2005
| 噴涂硬質蜂窩式聚氨酯熱絕緣材料的標準規范
| Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation |
| ASTM C 1050-1991
| 剛性蜂窩狀聚氨基甲酸乙酯--纖維素纖維組合屋面絕緣材料
| Rigid Cellular Polystyrene-Cellulosic Fiber Composite Roof Insulation
|
| ASTM C 1071-2005
| 纖維玻璃管道襯里絕緣材料(隔熱和吸音材料)標準規范
| Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
|
| ASTM C 1104/C 1104M-2000
| 測定未覆面礦物纖維絕緣材料蒸汽的吸收率的標準試驗方法
| Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
|
| ASTM C 1126-2004
| 光面或非光面硬質多孔酚醛熱絕緣材料標準規范
| Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
|
| ASTM C 1129-1989
| 通過給凸面閥門及法蘭增加熱絕緣材料評估蓄熱量的標準實施規程
| Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
|
| ASTM C 1134-1990
| 部分浸入后剛性熱絕緣材料水分保持標準試驗方法
| Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
|
| ASTM C 1224-2003
| 建筑物用反射絕緣材料標準規范
| Standard Specification for Reflective Insulation for Building Applications
|
| ASTM C 1488-2004
| 纖維素疏松填充絕緣材料模擬老化的標準實施規程
| Standard Practice for Simulated Aging of Cellulosic Loose-Fill Insulation
|
| ASTM C 1497-2004
| 纖維素纖維穩定熱絕緣材料標準規范
| Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation
|
| ASTM C 1511-2004
| 玻璃纖維絕緣材料(飛行器型)的水分保持(抵抗性)特征測定的標準試驗方法
| Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Glass Fiber Insulation (Aircraft Type)
|
| ASTM C 1559-2004
| 玻璃纖維襯墊絕緣材料芯吸性測定的標準試驗方法(飛行器類型)
| Standard Test Method for Determining Wicking of Glass Fiber Blanket Insulation (Aircraft Type)
|
| ASTM C 1574-2004
| 噴射松填充礦物纖維熱絕緣材料膨脹密度測定的標準指南
| Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation
|
| ASTM C 1594-2004
| 聚酰亞胺硬質泡沫熱絕緣材料的標準規范
| Standard Specification for Polyimide Rigid Cellular Thermal Insulation
|
| ASTM C 1616-2005
| 稱重法測定無機絕緣材料含水量的標準試驗方法
| Standard Test Method for Determining the Moisture Content of Inorganic Insulation Materials by Weight
|
| ASTM C 1617-2005
| 金屬水腐蝕熱絕緣材料中浸出的含離子萃取溶液的定量加速實驗室評定的標準實施規程
| Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
|
| ASTM C 335a-2005
| 管絕緣材料穩態傳熱特性的標準試驗方法
| Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
|
| ASTM C 351-1992
| 熱絕緣材料的平均比熱的試驗方法
| Test Method for Mean Specific Heat of Thermal Insulation
|
| ASTM C 351b-1992
| 熱絕緣材料的平均比熱的標準試驗方法
| Standard Test Method for Mean Specific Heat of Thermal Insulation
|
| ASTM C 585-1990
| 公稱尺寸的管子(NPS系統)用剛性熱絕緣材料的內外直徑的標準實施規程
| Standard Practice for Inner and Outer Diameters of Rigid Thermal Insulation for Nominal Sizes of Pipe and Tubing (NPS System))
|
| ASTM C 762-1986
| 高溫下用噴制纖維熱絕緣材料應用規程
| Application of Spray-Applied Fibrous Thermal Insulation for Elevated Temperatures
|
| ASTM C 854-1990
| 金屬制反射管絕緣材料抗外部荷載力的測試方法
| Test Method for Resistance to External Loads on Metal Reflective Pipe Insulation
|
| ASTM C 870-1996
| 熱絕緣材料的調整的標準實施規程
| Standard Practice for Conditioning of Thermal Insulating Materials
|
| ASTM C 991-2003
| 金屬建筑物用撓性玻璃纖維絕緣材料標準規范
| Standard Specification for Flexible Glass Fiber Insulation for Metal Buildings
|
| ASTM D 1351-2002
| 電線和電纜用熱塑性聚乙烯絕緣材料的標準規范
| Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable
|
| ASTM D 1389a-1997
| 薄固體電絕緣材料的保護電壓試驗的標準試驗方法
| Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
|
| ASTM D 149a-1997
| 固體電絕緣材料在商用電源頻率下的介電擊穿電壓和介電強度的標準試驗方法
| Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
|
| ASTM D 150-1998
| 固體電絕緣材料(恒定電介質)的交流損耗特性和介電常數的標準試驗方法
| Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
|
| ASTM D 1523-2000
| 工作溫度為90℃的電線和電纜用合成橡膠絕緣材料的標準規范
| Standard Specification for Synthetic Rubber Insulation for Wire and Cable, 90°C Operation
|
| ASTM D 1825-2003
| 電氣試驗用鍍銅電絕緣材料及熱固性層壓材料的浸蝕和清洗標準實施規范
| Standard Practice for Etching and Cleaning Copper-Clad Electrical Insulating Materials and Thermosetting Laminates for Electrical Testing
|
| ASTM D 1933-2003
| 作為電絕緣材料的氮?dú)獾臉?biāo)準規范
| Standard Specification for Nitrogen Gas as an Electrical Insulating Material
|
| ASTM D 2132-2003
| 電絕緣材料的塵霧起痕和耐腐蝕性的標準試驗方法
| Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
|
| ASTM D 2219-2002
| 電線和電纜用聚氯乙烯絕緣材料(工作溫度60℃)的標準規范
| Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation
|
| ASTM D 2275-2001
| 固體電絕緣材料表面對局部放電(電暈)的耐電壓性標準試驗方法
| Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface
|
| ASTM D 2303-1997
| 絕緣材料液態污染、斜面漏電痕跡和腐蝕的標準試驗方法
| Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials
|
| ASTM D 2304-1997
| 硬質電絕緣材料耐熱性的標準試驗方法
| Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
|
| ASTM D 2520-2001
| 在微波頻率和1650℃時固體電絕緣材料復合介電常數的標準試驗方法
| Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650oC
|
| ASTM D 257-1999
| 絕緣材料的直流電阻或電導率的標準試驗方法
| Standard Test Methods for DC Resistance or Conductance of Insulating Materials
|
| ASTM D 2633-2002
| 電線及電纜用熱塑絕緣材料和護套的標準試驗方法
| Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
|
| ASTM D 2655-2000
| 額定電壓為0到2000V的電線和電纜用交聯聚乙烯絕緣材料的標準規范
| Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V
|
| ASTM D 2656-2000
| 疃ǖ繆刮001到35000V的電線和電纜用交聯聚乙烯絕緣材料的標準規范
| Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V
|
| ASTM D 2770-2001
| 電線及電纜用耐臭氧的乙丙橡膠整體絕緣材料及套管材料標準規范
| Standard Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable
|
| ASTM D 2802-2003
| 電線及電纜用耐臭氧乙烯烴聚合物絕緣材料的標準規范
| Standard Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable
|
| ASTM D 2865-2001
| 電絕緣材料試驗用標準和設備校正的標準規程
| Standard Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing
|
| ASTM D 3151-1988
| 在電應力作用下電絕緣材料的熱損壞的試驗方法
| Standard Test Method for Thermal Failure of Solid Electrical Insulating Materials Under Electric Stress
|
| ASTM D 3277-1995
| 經油浸漬的纖維素絕緣材料含水量的標準試驗方法
| Standard Test Methods for Moisture Content of Oil-Impregnated Cellulosic Insulation
|
| ASTM D 3283-1998
| 作為電絕緣材料用的氣體
| Air as an Electrical Insulating Material
|
| ASTM D 3376-1988
| 制造電絕緣材料用紙漿的取樣及試驗的標準試驗方法
| Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
|
| ASTM D 3426-1997
| 用脈沖波法測定固體電絕緣材料的電介質擊穿電壓及抗電強度的標準試驗方法
| Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves
|
| ASTM D 3554-2001
| 75℃工作條件下電線及電纜用不留痕跡的黑色熱塑高密度聚乙烯絕緣材料標準規范
| Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75oC Operation
|
| ASTM D 3555-2001
| 90℃工作條件下電線及電纜用不留痕跡的黑色交聯聚乙烯絕緣材料標準規范
| Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90oC Operation
|
| ASTM D 3638-1993
| 電絕緣材料比較漏電痕跡指數的標準試驗方法
| Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials
|
| ASTM D 374-1999
| 固體電絕緣材料厚度的標準試驗方法
| Standard Test Methods for Thickness of Solid Electrical Insulation
|
| ASTM D 374M-1999
| 固體電絕緣材料厚度的標準試驗方法(米制)
| Standard Test Methods for Thickness of Solid Electrical Insulation (Metric)
|
| ASTM D 3755-1997
| 在直流電壓作用下固體電絕緣材料的介電擊穿電壓及介電強度的標準試驗方法
| Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
|
| ASTM D 3850-1994
| 用熱解重量法測定固體電絕緣材料快速熱降解的標準試驗方法
| Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
|
| ASTM D 470-2005
| 電線和電纜用交聯絕緣材料與套管的標準試驗方法
| Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
|
| ASTM D 495-1999
| 固體電絕緣材料的耐高壓低電流干電弧性能的測試方法
| Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
|
| ASTM D 5288-1997
| 使用多電極材料測定電絕緣材料追蹤攝影系數的標準試驗方法
| Standard Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
|
| ASTM D 5424-2005
| 電纜或光纜中絕緣材料在立式電纜槽結構中燃燒時的煙霧遮蔽性標準試驗方法
| Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
|
| ASTM D 5537-2003
| 電纜或光纜絕緣材料在立式電纜槽裝置中燃燒時熱發散、火焰?zhèn)鞑ァ煹幕璋刀群唾|(zhì)量損失測試的標準試驗方法
| Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
|
| ASTM D 6054-1997
| 試驗用調整電氣絕緣材料的標準操作規程
| Standard Practice for Conditioning Electrical Insulating Materials for Testing
|
| ASTM D 6097a-2001
| 固體介電絕緣材料中有通氣孔的水柱提升的相對阻力測定的標準試驗方法
| Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
|
| ASTM D 6113-2003
| 用錐形量熱計對電纜或光纜中絕緣材料的著火試驗反應特性測定的標準試驗方法
| Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
|
| ASTM D 6272-2002
| 通過四點彎曲對非增強和增強塑料和電氣絕緣材料的柔韌特性的標準試驗方法
| Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
|
| ASTM D 784-2003
| 電絕緣材料用橙色紫膠和其他印度蟲膠標準規范
| Standard Specification for Orange Shellac and Other Indian Lacs for Electrical Insulation
|
| ASTM D 785-2003
| 塑料和電絕緣材料洛氏硬度的標準試驗方法
| Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
|
| ASTM D 790-2003
| 未增強和增強塑料及電絕緣材料的撓曲性的標準試驗方法
| Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
|
| ASTM D 952-2002
| 薄板塑料和電絕緣材料粘結強度的標準試驗方法
| Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
|
| ASTM E 2231-2002
| 表面燃燒特性評估用管和管絕緣材料的樣品制備和安裝的標準實施規范
| Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
|
| ASTM E 285-1980
| 熱絕緣材料的氧乙炔燒蝕試驗方法
| Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
|
| ASTM E 936-1998
| 使用鋼蓋板、預成形屋面絕緣材料和瀝青組合屋面的屋面系統組件
| Standard Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing
|
| ASTM F 683a-2003
| 管道和機械用熱絕緣材料選擇和應用的標準規程
| Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery
|
| ASTM F 777-1989
| 與火焰成60°角時電線絕緣材料的耐火性的試驗方法
| Test Method for Resistance of Electrical Wire Insulation Materials to Flame at 60 Degrees
|
| IEEE 117-1974
| 不規則纏繞交流電機絕緣材料系統的評定試驗程序
| (Test procedure for evaluation of systems of insulation materials for random-wound ac electric machinery)
|
| IEEE 1276-1997
| 油冷電力變壓器中高溫絕緣材料使用的試用指南
| (Trial-use guide for the application of high-temperature insulation materials in liquid-immersed power transformers)
|
| IEEE 98-2002
| 固體電絕緣材料熱評定用測試程序的編制
| (Preparation of test procedures for the thermal evaluation of solid electrical insulation materials)
|
| UL 1446-1997
| 絕緣材料系統.概論
| (Systems of insulating materials - General )
|
| UL 2171-1993
| 通過更迭制冷劑對產品進行現場轉換和改型.絕緣材料和制冷劑兼容性
| (Field conversion/retrofit of products to change to an alternative refrigerant - Insulating material and refrigerant compatibility )
|
| UL 2395-2002
| 加熱和冷卻設備上固定熱絕緣材料用膠粘劑
| (Adhesives for use in heating and colling appliances to secure thermal isolation materials )
|
| 編號 | 中文名稱 | 英文名稱 |
|---|