| 編號 | 中文名稱 | 英文名稱 |
|---|
| IEC 60092-351-2004
| 船舶電氣設施.第351部分:船載和海上成套動力裝置、遠程通訊及控制數據電纜用絕緣材料
| Electrical installations in ships - Part 351: Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables
|
| IEC 60093-1980
| 固體絕緣材料體電阻率和面電阻率的試驗方法
| Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
|
| IEC 60112 Corrigendum 1-2003
| 固體絕緣材料的比較起痕指數和耐起痕指數的測定方法
| Method for the determination of the proof and the comparative tracking indices of solid insulating materials
|
| IEC 60112 Corrigendum 2-2003
| 固體絕緣材料的比較起痕指數和耐起痕指數的測定方法
| Method for the determination of the proof and the comparative tracking indices of solid insulating materials; Corrigendum 2
|
| IEC 60112-2003
| 固體絕緣材料的比較起痕指數和耐泄痕指數的測定方法
| Method for the determination of the proof and the comparative tracking indices of solid insulating materials
|
| IEC 60167-1964
| 測定固體絕緣材料絕緣電阻的試驗方法
| Methods of test for the determination of the insulation resistance of solid insulating materials
|
| IEC 60212-1971
| 固體電氣絕緣材料試驗前和試驗時采用的標準條件
| Standard conditions for use prior to and during the testing of solid electrical insulating materials
|
| IEC 60216-1-2001
| 電氣絕緣材料 耐熱性 第1部分：老化規程和試驗結果的評價
| Electrical insulating materials - Properties of thermal endurance - Part 1: Ageing procedures and evaluation of test results
|
| IEC 60216-2-2005
| 電氣絕緣材料.耐熱性.第2部分:電氣絕緣材料耐熱性測定.試驗標準的選擇
| Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
|
| IEC 60216-3-2006
| 電絕緣材料.耐熱性能.第3部分:耐熱性計算說明
| Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
|
| IEC 60216-4-1-2006
| 電氣絕緣材料.耐熱特性.第4-1部分:老化烘箱.單室烘箱
| Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens
|
| IEC 60216-4-2-2000
| 電氣絕緣材料 耐熱性能 第4-2部分:熱老化烘箱 最高至300℃的精密烘爐
| Electrical insulating materials - Thermal endurance porperties - Part 4-2: Ageing ovens; Precision ovens for use up to 300 °C
|
| IEC 60216-4-3-2000
| 電氣絕緣材料 耐熱性能 第4-3部分:老化烘箱 多室烘箱
| Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens
|
| IEC 60216-5-2003
| 電絕緣材料.耐熱特性.第5部分:絕緣材料的相對耐熱指數(RTE)的測定
| Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
|
| IEC 60216-6-2006
| 電氣絕緣材料.耐熱性能.第6部分:使用固定時間框架法測定絕緣材料的耐熱指數(TI和RTE)
| Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
|
| IEC 60243-1-1998
| 固體絕緣材料電氣強度試驗方法 第1部分:工頻下試驗
| Electrical strength of insulating materials - Test methods - Part 1: Tests at power frequencies
|
| IEC 60243-2-2001
| 絕緣材料的電氣強度 試驗方法 第2部分：對直流電壓試驗的附加要求
| Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage
|
| IEC 60243-3-2001
| 絕緣材料的電氣強度 試驗方法 第3部分：對1.2/50μs沖擊試驗的附加要求
| Electric strength of insulating materials - Test methods - Part 3: Additional requirements for 1,2/50 μs impulse tests
|
| IEC 60250-1969
| 測定電氣絕緣材料在工頻、音頻、射頻(包括米波長)下電容率和電介質損耗因數的推薦方法
| Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including meter wavelengths
|
| IEC 60343-1991
| 測定絕緣材料相對耐表面放電擊穿能力的推薦試驗方法
| Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
|
| IEC 60345-1971
| 絕緣材料在升高溫度下電阻和電阻率的試驗方法
| Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures
|
| IEC 60371-1-2003
| 云母基絕緣材料規范.第1部分:定義和一般要求
| Specification for insulating materials based on MICA - Part 1: Definitions and general requirements
|
| IEC 60371-2-2004
| 以云母為基材的絕緣材料規范.第2部分:試驗方法
| Specification for insulating materials based on mica - Part 2: Methods of test
|
| IEC 60371-3-1-2006
| 以云母為基材的絕緣材料規范.第3部分:單項材料規范.活頁1:換向器隔板及材料
| Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 1: Commutator separators and materials
|
| IEC 60371-3-2-2005
| 以云母為基材的絕緣材料.第3部分:單一材料規范.活頁2:云母紙
| Insulating materials based on mica - Part 3: Specifications for indvidual materials - Sheet 2: Mica paper
|
| IEC 60371-3-3-1983
| 以云母為基材的絕緣材料規范 第3部分:單項材料規范 活頁3:加熱設備用硬質云母材料
| Specification for insulating materials based on mica. Part 3 : Specifications for individual materials. Sheet 3: Specification for rigid mica materials for heating equipment
|
| IEC 60371-3-4-1992
| 以云母為基材的絕緣材料規范 第3部分:單項材料規范 活頁4:聚酯薄膜補強B階環氧樹脂粘合云母紙
| Specification for insulating materials based on mica; part 3: specifications for individual materials; sheet 4: polyester film-backed mica paper with a B-stage epoxy resin binder
|
| IEC 60371-3-5-2005
| 以云母為基材的絕緣材料.第3部分:單項材料規范.活頁5:后浸漬用玻璃布補強環氧樹脂粘合云母紙
| Insulating materials based on mica - Part 3: Specification for individual materials - Sheet 5: Glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI)
|
| IEC 60371-3-6-1992
| 以云母為基材的絕緣材料規范 第3部分:單項材料規范 活頁6:補強玻璃布B階環氧樹脂粘合云母紙
| Specification for insulating materials based on mica; part 3: specifications for individual materials; sheet 6: glass-backed mica paper with a B-stage epoxy resin binder
|
| IEC 60371-3-7 Corrigendum 1-1995
| 以云母為基材的絕緣材料.第3部分:單項材料規范.活頁7:單根導線纏繞用環氧樹脂粘合聚脂薄膜云母紙
| Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping
|
| IEC 60371-3-7-1995
| 以云母為基材的絕緣材料 第3部分:單項材料規范 活頁7:單根導線纏繞用環氧樹脂粘合聚脂薄膜云母紙
| Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping
|
| IEC 60371-3-8 Corrigendum 1-1995
| 以云母為基材的絕緣材料.第3部分:單項材料規范.活頁8:阻燃安全電纜用云母紙帶
| Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables
|
| IEC 60371-3-8-1995
| 以云母為基材的絕緣材料 第3部分:單項材料規范 活頁8:阻燃安全電纜用云母紙帶
| Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables
|
| IEC 60371-3-9 Corrigendum 1-1995
| 以云母為基材的絕緣材料.第3部分:單項材料規范.活頁9:塑型云母板
| Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite
|
| IEC 60371-3-9-1995
| 以云母為基材的絕緣材料 第3部分:單項材料規范 活頁9:塑型云母板
| Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite
|
| IEC 60377-1-1973
| 絕緣材料在300MHz以上頻率下介電性能測定方法 第1部分:總則
| Methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz. Part 1 : General
|
| IEC 60377-2-1977
| 絕緣材料在300MHz以上頻率下介電性能測定方法 第2部分:諧振法
| Methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz. Part 2 : Resonance methods
|
| IEC 60426-1973
| 測定絕緣材料所引起的電解腐蝕的試驗方法
| Test methods for determining electrolytic corrosion with insulating materials
|
| IEC 60450-2004
| 新的和老化的纖維素電氣絕緣材料的粘均聚合度的測量
| Measurement of the average viscometric degree of polymerisation of new and aged cellulosic electrically insulating materials
|
| IEC 60544-1-1994
| 電氣絕緣材料 電離輻射效應的測定 第1部分:輻射的相互作用和劑量
| Electrical insulating materials - Determination of the effects of ionizing radiation - Part 1: Radiation interaction and dosimetry
|
| IEC 60544-2-1991
| 測定電離輻射對絕緣材料的效應的指南 第2部分:輻照和試驗的規程
| Guide for determining the effects of ionizing radiation on insulating materials; part 2: procedures for irradiation and test
|
| IEC 60544-4-2003
| 電絕緣材料.電離輻射效應的測定.第4部分:在輻射環境中工作的分類體系
| Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments
|
| IEC 60544-5-2003
| 電絕緣材料.確定電離輻射的影響.第5部分:在使用過程中的老化評定方法
| Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service
|
| IEC 60587-1984
| 評定在嚴酷環境條件下使用的電氣絕緣材料耐起痕和耐蝕損的試驗方法
| Test methods for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions
|
| IEC 60589 Corrigendum 1-1978
| 測定電氣絕緣材料中離子雜質的液體萃取試驗方法
| Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids
|
| IEC 60589-1977
| 測定電氣絕緣材料中離子雜質的液體萃取試驗方法
| Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids
|
| IEC 60614-2-2 AMD 1-1993
| 電氣裝置用導管規范 第2-2部分:絕緣材料剛性無螺紋導管的特殊規范 修改1
| Specification for conduits for electrical installations; part 2: particular specifications for conduits; section 2: rigid plain conduits of insulting materials; amendment 1
|
| IEC 60614-2-2-1980
| 電氣裝置用導管規范 第2-2部分:絕緣材料剛性無螺紋導管的特殊規范
| Specification for conduits for electrical installations. Part 2 : Particular specification for rigid plain conduits of insulating materials
|
| IEC 60614-2-3-1990
| 電氣裝置用導管規范 第2部分:導管的特殊規范 第3節:絕緣材料柔韌導管
| Specification for conduits for electrical installations; part 2: particular specifications for conduits; section three: pliable conduits of insulating material
|
| IEC 60614-2-4 AMD 1-1993
| 電氣裝置用導管規范 第2部分:導管的特殊規范 第4節:絕緣材料柔韌自復性導管 修改1
| Specification for conduits for electrical installations; part 2: particular specifications for conduits; section 4: pliable self-recovering conduits of insulting materials; amendment 1
|
| IEC 60614-2-4-1985
| 電氣裝置用導管規范 第2部分:導管的特殊規范 第4節:絕緣材料柔韌自復性導管
| Specification for conduits for electrical installations. Part 2 : Section four: Pliable self-recovering conduits of insulating materials
|
| IEC 60672-1-1995
| 陶瓷和玻璃絕緣材料 第1部分:定義和分類
| Ceramic and glass insulating materials - Part 1: Definitions and classification
|
| IEC 60672-2-1999
| 陶瓷和玻璃絕緣材料 第2部分:試驗方法
| Ceramic and glass insulating materials - Part 2: Methods of test
|
| IEC 60672-3-1997
| 陶瓷和玻璃絕緣材料 第3部分:單項材料規范
| Ceramic and glass-insulating materials - Part 3: Specifications for individual materials
|
| IEC 60829-1988
| 暴露在電熱絲源下的固體絕緣材料可燃性的測定方法
| Methods of test for the determination of the ignitability of solid electrical insulating materials when exposed to electrically heated wire sources
|
| IEC 60893-1-2004
| 絕緣材料.電工用熱固性樹脂工業硬質層壓片.第1部分:定義、名稱和一般要求
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements
|
| IEC 60893-3-1-2003
| 絕緣材料.電工用熱固性樹脂工業硬質層壓片.第3-1部分:專用材料規范.對工業硬質層壓片類型的要求
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials; Requirements for types of industrial rigid laminated sheets
|
| IEC 60893-3-2-2003
| 絕緣材料.電工用熱固性樹脂工業硬質層壓片.第3-2部分:專用材料規范.對環氧樹脂硬質層壓片的要求
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials; Requirements for rigid laminated sheets based on epoxide resins
|
| IEC 60893-3-3-2003
| 絕緣材料.電工用熱固性樹脂工業硬質層壓片.第3-3部分:專用材料規范.對三聚氰胺樹脂硬質層壓片的要求
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials; Requirements for rigid laminated sheets based on melamine resins
|
| IEC 60893-3-4-2003
| 絕緣材料.電工用熱固性樹脂工業硬質層壓片.第3-4部分:專用材料規范.對酚醛樹脂硬質層壓片的要求
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials; Requirements for rigid laminated sheets based on phenolic resins
|
| IEC 60893-3-5-2003
| 絕緣材料.電工用熱固性樹脂工業硬質層壓片.第3-5部分:專用材料規范.對聚酯樹脂硬質層壓片的要求
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials; Requirements for rigid laminated sheets based on polyester resins
|
| IEC 60893-3-6-2003
| 絕緣材料.電工用熱固性樹脂工業硬質層壓片.第3-6部分:專用材料規范.對硅樹脂硬質層壓片的要求
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials; Requirements for rigid laminated sheets based on silicone resins
|
| IEC 60893-3-7-2003
| 絕緣材料.電工用熱固性樹脂工業硬質層壓片.第3-7部分:專用材料規范.對聚酰亞胺樹脂基剛性層壓片的要求
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials; Requirements for rigid laminated sheets based on polyimide resins
|
| IEC 60903 Corrigendum 1-2003
| 帶電作業.絕緣材料手套
| Live working - Gloves of insulating material
|
| IEC 60903 Corrigendum 2-2005
| 帶電作業.絕緣材料手套.勘誤2
| Live working - Gloves of insulating material; Corrigendum 2
|
| IEC 60903-2002
| 帶電作業.絕緣材料手套
| Live working - Gloves of insulating material
|
| IEC 60984 AMD 1-2002
| 帶電作業用絕緣材料衣袖.修改件1
| Sleeves of insulating material for live working; Amendment 1
|
| IEC 60984 Edition 1.1-2002
| 帶電作業用絕緣材料衣袖
| Sleeves of insulating material for live working
|
| IEC 61006-2004
| 電氣絕緣材料.玻璃化轉變溫度測定用試驗方法
| Electrical insulating materials - Methods of test for the determination of the glass transition temperature
|
| IEC 61035-2-2-1993
| 電氣裝置用導管配件規范 第2部分:特殊要求 第2節:絕緣材料導管配件
| Specification for conduit fittings for electrical installations; part 2: particular specifications; section 2: conduit fittings of insulating material
|
| IEC 61111 AMD 1-2002
| 電器用絕緣材料墊.修改件1
| Matting of insulating material for electrical purposes; Amendment 1
|
| IEC 61111 Corrigendum 1-2000
| 電工用絕緣材料墊
| Matting of insulating material for electrical purposes
|
| IEC 61111 Edition 1.1-2002
| 電器用絕緣材料墊
| Matting of insulating material for electrical purposes
|
| IEC 61111-1992
| 電工用絕緣材料墊
| Matting of insulating material for electrical purposes
|
| IEC 61112 AMD 1-2002
| 電器用絕緣材料套.修改件1
| Blankets of insulating material for electrical purposes; Amendment 1
|
| IEC 61112 Corrigendum 1-2000
| 電工用絕緣材料毯
| Blankets of insulating material for electrical purposes
|
| IEC 61112 Edition 1.1-2002
| 電器用絕緣材料套
| Blankets of insulating material for electrical purposes
|
| IEC 61112-1992
| 電工用絕緣材料毯
| Blankets of insulating material for electrical purposes
|
| IEC 61181-1993
| 浸漬絕緣材料 溶解氣體分析(DGA)應用于電氣設備的工廠試驗
| Impregnated insulating materials; application of dissolved gas analysis (DGA) to factory tests on electrical equipment
|
| IEC 61212-1-2006
| 絕緣材料.電工用熱固性樹脂基工業剛性圓形層壓管和棒.第1部分:定義、名稱與符號、一般要求
| Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designation and general requirements
|
| IEC 61212-3-1-2006
| 絕緣材料.電工用熱固性樹脂基工業剛性圓形層壓管和棒.第3部分:單項材料規范.活頁1:圓形層壓軋制管
| Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes
|
| IEC 61212-3-2-2006
| 絕緣材料.電工用基于熱固樹脂的工業剛性圓形層壓管材和桿材.第3部分:單項材料規范.活頁2:圓形層壓模制管材
| Insulating materials - Industrial rigid round lamineted tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes
|
| IEC 61212-3-3-2006
| 絕緣材料.電工用熱固性樹脂工業硬質圓形層壓管和棒.第3部分:單項材料規范.活頁3:圓形層壓模制棒
| Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods
|
| IEC 61234-1-1994
| 電氣絕緣材料水解穩定性的試驗方法 第1部分:塑料薄膜
| Method of test for the hydrolytic stability of electrical insulating materials; part 1: plastic films
|
| IEC 61234-2-1997
| 電氣絕緣材料 水解穩定性的試驗方法 第2部分:模塑熱固性材料
| Electrical insulating materials - Methods of test for the hydrolytic stability - Part 2: Moulded thermosets
|
| IEC 61302 Corrigendum 1-1995
| 電氣絕緣材料.評定耐起痕和耐蝕損的方法.旋轉輪沉浸試驗
| Electrical insulating materials - Method to evaluate the resistance to tracking and erosion - Rotating wheel dip test
|
| IEC 61302-1995
| 電氣絕緣材料 評定耐起痕和耐蝕損的方法 旋轉輪沉浸試驗
| Electrical insulating materials - Method to evaluate the resistance to tracking and erosion - Rotating wheel dip test
|
| IEC 61478 AMD 1-2003
| 帶電作業.絕緣材料做成的梯子.修改件1
| Live working - Ladders of insulating material; Amendment 1
|
| IEC 61478-2001
| 帶電作業 絕緣材料梯
| Live working - Ladders of insulating material
|
| IEC 61479 AMD 1-2002
| 帶電作業.絕緣材料制的軟導體套(線性軟管).修改1
| Live working - Flexible conductor covers (line hoses) of insulating material; Amendment 1
|
| IEC 61479 Edition 1.1-2002
| 帶電作業.絕緣材料制的軟導體套(線性軟管)
| Live working - Flexible conductor covers (line hoses) of insulating material
|
| IEC 61479-2001
| 帶電作業 絕緣材料軟導體套（線路管）
| Live working - Flexible conductor covers (line hoses) of insulating material
|
| IEC 61621-1997
| 干燥實心絕緣材料 耐高壓低電流電弧放電的試驗
| Dry, solid insulating materials - Resistance test to high-voltage, low current arc discharges
|
| IEC 62011-1-2002
| 絕緣材料.電氣設備用工業剛性模制矩形和六邊形橫截面的熱固性樹脂基薄壁管材和棒材.第1部分:定義,命名和一
| Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements
|
| IEC 62011-2-2004
| 絕緣材料.電氣設備用工業剛性模制矩形和六角形橫截面的熱固性樹脂基疊層管材和棒材.第2部分:試驗方法
| Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test
|
| IEC 62011-3-1-2003
| 絕緣材料.電氣設備用基于熱固性樹脂的矩形和六邊形橫截面的工業剛性模制層壓管材和桿材.第3-1部分:單項材料
| Insulating materials - Industrial, rigid moulded laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials; Tubes and rods of rectangular and hexagonal cross-section
|
| IEC/TR 60893-4-2003
| 絕緣材料.電工用熱固性樹脂基絕緣剛性層壓薄板.第4部分:代表值
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
|
| IEC/TR 61074-1991
| 用差示掃描量熱法對電氣絕緣材料的結晶、熔化溫度和熱量的測定
| Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry
|
| IEC/TR2 61251-1993
| 電氣絕緣材料 交流電壓耐久性評定 一般介紹
| Electrical insulating materials; A.C. voltage endurance evaluation; introduction
|
| IEC/TS 60076-14-2004
| 電力變壓器.第14部分:使用高溫絕緣材料的液浸式電力變壓器的設計和應用
| Power transformers - Part 14: Design and application of liquid-immersed power transformers using high-temperature insulation materials
|
| IEC/TS 61934-2006
| 電絕緣材料和系統.在短上升時間和反復電壓脈沖下局部放電(PD)的電測量
| Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses
|
| IEC/TS 61956-1999
| 評價絕緣材料中水份枝狀組織的試驗方法
| Methods of test for the evaluation of water treeing in insulating materials
|
| 編號 | 中文名稱 | 英文名稱 |
|---|