| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 1282-1990 | 潤滑脂槍.手動擠壓式油槍 | Grease guns; push type-hand gun |
| DIN 1284-1990 | 潤滑脂槍.杠桿式滑油槍的潤滑脂筒.主要尺寸 | Grease guns; grease cartridges for lever type-hand gun; main dimensions |
| DIN 1442-1963 | 銷釘潤滑鉆孔 | Drilled holes for lubrication of pins |
| DIN 21258-2007 | 采礦用摩擦提升鋼索的潤滑劑和浸漬劑.安全要求和測試 | Lubricants and impregnating compounds for friction hoist ropes in mining - Safety requirements and testing |
| DIN 24271-1-1982 | 集中潤滑系統.第1部分:術語、分類 | Centralized lubrication systems; Terminology, Classification |
| DIN 24271-2-1982 | 集中潤滑系統.第2部分:技術圖紙的圖形符號 | Centralized lubrication systems; Graphic symbols for technical drawings |
| DIN 24271-3-1982 | 集中潤滑系統.第3部分:技術數值及單位 | Centralized lubrication systems; Technical quantities and units |
| DIN 24500-5-1971 | 軋制設備.第5部分:軋鋼機、軋制用冷卻和潤滑裝置的標識 | Rolling mill equipment; rolling mills for steel, designation for cooling and lubricating plants for the rolling |
| DIN 31655-1-1991 | 滑動軸承.穩定工作條件下液體靜壓向心滑動軸承.不帶排油槽的油潤滑滑動軸承的計算 | Plain bearings; hydrostatic plain journal bearings under steady-state conditions; calculation of oil-lubricated plain bearings without drainage grooves |
| DIN 31655-2-1991 | 滑動軸承.穩定工作條件下靜壓向心滑動軸承.不帶排油槽的油潤滑滑動軸承計算用特性值 | Plain bearings; hydrostatic plain journal bearings under steady-state conditions; characteristic values for the calculation of oil-lubricated plain bearings without drainage grooves |
| DIN 31656-1-1991 | 滑動軸承.穩定工作條件下液體靜壓向心滑動軸承.帶排油槽的油潤滑滑動軸承的計算 | Plain bearings; hydrostatic plain journal bearings under steady-state conditions; calculation of oil-lubricated plain bearings with drainage grooves |
| DIN 31656-2-1991 | 滑動軸承.穩定工作條件下靜壓向心滑動軸承.帶排油槽的油潤滑滑動軸承計算用特性值 | Plain bearings; hydrostatic plain journal bearings under steady-state conditions; characteristic values for the calculation of oil-lubricated plain bearings with drainage grooves |
| DIN 31665-1993 | 滑動軸承.軸承金屬的試驗.靜態應力下使用潤滑劑時金屬的耐腐蝕性 | Plain bearings; testing of bearing metals; resistance to corrosion by lubricants and static conditions |
| DIN 31692-1-1996 | 滑動軸承.第1部分:潤滑和潤滑監測 | Plain bearings - Part 1: Lubrication and lubrication monitoring |
| DIN 322-1983 | 關節軸承.一般用途的潤滑浮環 | Plain bearings; loose lubrication rings for general purposes |
| DIN 3405-1986 | 杯形潤滑油嘴 | Lubricating nipples cupped type |
| DIN 3410-1974 | 潤滑油排出管嘴.總尺寸和裝配尺寸 | Lubricating nipples; overall and fitting dimensions |
| DIN 3411-1972 | 潤滑油箱.輕型結構 | Grease box; light construction |
| DIN 3412-1972 | 潤滑油箱.重型結構 | Grease box; heavy construction |
| DIN 3536-1994 | 室內設備、煤氣分配和煤氣輸送管道的煤氣閥用潤滑劑 | Lubricants for gas valves in indoor installation, gas distribution, and gas transportation pipe lines |
| DIN 43200-2002 | 電動機用滾柱軸承.維護.安裝.潤滑.拆卸.清洗和再使用 | Roller bearings for electrical machines of electric vehicles - Preservation, mounting, lubrications, dismounting, cleaning and reutilization |
| DIN 51347-1-2000 | 潤滑劑試驗.采用Brugger潤滑劑試驗的邊界潤滑條件下的試驗.第1部分:工作總則 | Testing of lubricants - Testing under boundary lubricating conditions with the Brugger lubricant tester - Part 1: General working principles |
| DIN 51347-2-2000 | 潤滑劑試驗.采用Brugger潤滑劑試驗的邊界潤滑條件下的試驗.第2部分.工作總則 | Testing of lubricants - Testing under boundary lubricating conditions with the Brugger lubricant tester - Part 2: General working principles |
| DIN 51350-1-1977 | 潤滑劑檢驗.第1部分:用殼牌公司的四球儀檢驗的一般工作原則 | Testing of lubricants; testing in the Shell-four-ball tester, general working principles |
| DIN 51350-2-1977 | 潤滑劑檢驗.第2部分:用殼牌公司的四球檢測儀檢驗.液體潤滑劑焊接承載力的測定 | Testing of lubricants; testing in the Shell-four-ball tester, determination of welding load of fluid lubricants |
| DIN 51350-3-1977 | 潤滑劑檢驗.第3部分:用殼牌公司的四球檢測儀檢驗.液體潤滑劑耐磨損特性的測定 | Testing of lubricants; testing in the Shell four-ball tester, determination of wearing caracteristics of liquid |
| DIN 51350-4-1984 | 潤滑劑檢驗.用殼牌公司的四球試驗儀檢驗.潤滑脂焊接載荷的測定 | Testing of lubricants; testing by the Shell four-ball tester; determination of welding load of consistent lubricants |
| DIN 51350-5-1984 | 潤滑劑檢驗.用殼牌公司的四球試驗儀檢驗.潤滑脂磨損特性值的測定 | Testing of lubricants; testing by the Shell four-ball tester; determination of wear characteristics for consistent lubricants |
| DIN 51350-6-1996 | 潤滑劑試驗.殼牌公司四球儀試驗.第6部分:帶聚合添料的潤滑油的切變穩定性測定 | Testing of lubricants - Testing in the Shell four-ball tester - Part 6: Determination of shear stability of lubricating oils containing polymers |
| DIN 51351-2007 | 潤滑劑測試.壓力管法測定制冷機油絮凝點 | Testing of lubricants - Determination of floc point of refrigerator oils by pressure tube method |
| DIN 51352-1-1985 | 潤滑劑的檢驗.潤滑油老化性能的測定.在潤滑油中通入空氣老化后康拉特遜殘?zhí)荚黾又? | Testing of lubricants; determination of ageing characteristics of lubricating oils; increase in Conradson carbon residue after ageing by passing air through the lubricating oil |
| DIN 51352-2-1985 | 潤滑劑檢驗.潤滑油老化性能的測定.在Ｆ2 Ｏ3 存在的情況下潤滑油中通入空氣老化后的康拉特遜殘?zhí)剂? | Testing of lubricants; determination of ageing characteristics of lubricating oils; Conradson carbon residue after ageing by passing air through the lubricating oil in the presence of iron(III)oxide |
| DIN 51357-1975 | 潤滑劑的試驗.對內燃機防腐油酸性中和性能的試驗.氫溴酸浸漬試驗 | Testing of lubricants; testing of anticorrosion oils for internal combustion engines in respect of acid neutralizing properties, hydrobromic acid immersion test |
| DIN 51358-1996 | 潤滑劑試驗.發動防腐油防腐性能試驗.海水浸泡試驗 | Testing of lubricants - Testing of anticorrosion oils for internal combustion engines with respect to corrosion preventing properties, sea water immersion test |
| DIN 51360-1-1985 | 冷卻潤滑劑的檢驗.摻水冷卻潤滑劑防腐性能的測定.第1部分:赫伯特(Herbert)法腐蝕試驗 | Testing of cooling lubricants; determination of corrosion preventing characteristics of cooling lubricants mixed with water; Herbert corrosion test |
| DIN 51360-2-1981 | 冷卻潤滑劑的檢驗.摻水冷卻的潤滑劑防腐性能的測定.碎片／濾紙法 | Testing of cooling lubricants; determination of corrosion preventing characteristics of cooling lubricants mixed with water; chip/filter paper method |
| DIN 51363-2-2003 | 石油產品測試.潤滑油及潤滑油添加劑磷含量測定.第2部分:波長色散Ｘ射線光譜分析法 | Testing of petroleum products - Determination of phosphorus content of lubricating oils and additives - Part 2: Analysis by wavelength dispersive X-ray spectrometry (XRS) |
| DIN 51363-3-2001 | 石油產品檢測.潤滑油及潤滑油添加劑磷含量測定.第3部分:感應耦合等離子體發射光譜分析法直接測定 | Testing of petroleum products - Determination of phosphorous content of lubricating oils and additives - Part 3: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| DIN 51365-1988 | 潤滑劑的試驗.使用過的發動機油的總污染物的測定.離心分離法 | Testing of lubricants; determination of total dirt in used engine oils; separation by centrifuging |
| DIN 51369-1981 | 冷卻潤滑劑的試驗.水混合式冷卻潤滑劑pH值的測定 | Testing of cooling lubricants; Determination of the pH value of water-mixed cooling lubricants |
| DIN 51375-2-2001 | 潤滑劑檢驗.發動機油乙二醇（１．２）含量測定.氣相層析法 | Testing of lubricants - Determination of 1,2-ethanediol content of motor oils - Part 2: Gas chromatography |
| DIN 51377-2003 | 潤滑劑的試驗.用冷起動模擬裝置測定-5℃至-35℃低溫下發動機油的表觀粘度 | Testing of lubricants - Determination of the apparent viscosity of motor oils at low temperature from -5 °C to -35 °C - Using the cold-cranking simulator |
| DIN 51379-2-1990 | 潤滑劑檢驗.潤滑油中鉬含量的測定.第2部分:波長頻散X射線光譜測定分析法 | Testing of lubricants; determination of molybdenum content of lubricating oils; analysis by wavelength dispersive X-ray spectrometry (XRS) |
| DIN 51380-1990 | 潤滑劑試驗.汽車發動機燃油使用的燃料稀釋劑的試驗.氣相色譜法 | Testing of lubricants; test for fuel diluent in used automotive engine oils; gas chromatography method |
| DIN 51385-1991 | 潤滑劑.金屬加工冷卻流體.術語 | Lubricants; metal working fluids; terms |
| DIN 51389-1-1982 | 潤滑劑的測定.葉片泵液壓流體的機械檢驗.第1部分:一般工作原則 | Determination of lubricants; mechanical testing of hydraulic fluids in the vane-cell-pump; general working principles |
| DIN 51389-2-1982 | 潤滑劑的測定.葉片泵液壓流體的機械檢驗.第2部分:無水液壓流體的 A 方法 | Determination of lubricants; mechanical testing of hydraulic fluids in the vane-cell-pump; method A foranhydrous hydraulic fluids |
| DIN 51389-3-1998 | 潤滑劑的檢測.葉輪泵中液壓流體的機械試驗.第3部分:含水不易燃液壓流體的B試驗方法 | Determination of lubricants - Mechanical testing of hydraulic fluids in the vane-cell-pump - Part 3: Method B for aqueous not easily inflammable hydraulic fluids |
| DIN 51391-1-1997 | 潤滑劑試驗.添加元素含量測定.原子吸收光譜法直接測定 | Testing of lubricants - Determination of additive elements - Part 1: Direct determination by atomic absorption spectrometry |
| DIN 51391-2-1994 | 潤滑劑檢驗.添加元素含量的測定.用波長彌散Ｘ射線光譜測定法 | Testing of lubricants; determination of the content of additive elements; analysis by wavelengthdispersive X-ray spectrometry (XRS) |
| DIN 51391-3-2004 | 潤滑劑的檢驗.添加元素含量的測定.第3部分:用感應耦合等離子體光發散光譜分析法(ICP OES)直接測定Ca、Mg、Z | Testing of lubricants - Determination of the content of additive elements - Part 3: Direct determination of Ca, Mg, Zn and Ba by optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| DIN 51394-1984 | 潤滑劑的試驗.低粘性潤滑油防氧化和防腐蝕性能的試驗 | Testing of lubricants; testing of low-viscosity lubricating oils for oxidation and corrosion inhibiting properties |
| DIN 51396-1-2005 | 潤滑劑試驗.磨損部件的測定.第1部分:用感應耦合等離子體發射光譜分析法(ICP OES)直接測定 | Testing of lubricants - Determination of wear elements - Part?1: Direct determination by inductively coupled plasma optical emission spectroscopy (ICP-OES) |
| DIN 51396-2-1998 | 潤滑劑的試驗.磨損元件的測定.第2部分:波長彌散X射線熒光分析(XRS) | Testing of lubricants - Determination of wear elements - Part 2: Analysis by wavelength dispersive X-ray spectrometry (XRS) |
| DIN 51398-1983 | 潤滑劑試驗；用Brookfield－粘度計測定低溫表觀粘度（液體浴法）的程序 | Testing of lubricants; procedure for measurement of low temperature apparent viscosity by means of the Brookfield viscometer (liquid bath method) |
| DIN 51417-2-1997 | 冷卻潤滑劑試驗.摻水冷卻潤滑劑中礦物油含量測定.第5部分:柱狀色譜法 | Testing of metal working fluids - Determination of mineral oil content of water mix metal working fluids - Part 2: Column chromatography method |
| DIN 51431-1-1997 | 潤滑劑試驗.鎂含量測定.第1部分:原子吸收光譜法(AAS)直接測定 | Testing of lubricants - Determination of the magnesium content - Part 1: Direct determination by atomic absorption spectrometry |
| DIN 51431-2-2004 | 潤滑劑的檢驗.鎂含量測定.第2部分:波長色散的X射線光譜分析法(XRF) | Testing of lubricants - Determination of the magnesium content - Part 2: Analysis by wavelength dispersive X-ray spectrometry (XRF) |
| DIN 51443-1992 | 潤滑劑的試驗.潤滑油中硼含量的測定.用原子吸收光譜法直接測定 | Testing of lubricants; determination of the boron content in lubricating oils; direct determination by Atomic Absorption Spectrometry (AAS) |
| DIN 51443-2-2001 | 潤滑劑試驗.硼含量測定.第2部分:通過感應耦合等離子體用光發射光譜分析直接測定 | Testing of lubricants - Determination of the boron content - Part 2: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| DIN 51452-1994 | 潤滑劑的試驗.柴油機廢油中油垢含量的測定.紅外線光譜法 | Testing of lubricants; determination of the soot content in used Diesel engine oils; infrared spectrometry |
| DIN 51453-2004 | 潤滑劑試驗.使用過的發動機油的氧化和硝化作用的測定.紅外線光譜法 | Testing of lubricants - Determination of oxidation and nitration of used motor oils - Infrared spectrometric method |
| DIN 51502-1990 | 潤滑劑的牌號和潤滑劑容器的標記.潤滑劑的符號、設備和潤滑點 | Designation of lubricants and marking of lubricant containers, equipment and lubricating points |
| DIN 51503-1-1997 | 潤滑劑.冷卻機油.第1部分:規范 | Lubricants - Refrigerator oils - Part 1: Specifications |
| DIN 51503-2-1998 | 潤滑劑.冷凍機油.第2部分:使用過的冷凍機油 | Lubricants - Refrigerator oils - Part 2: Used refrigerator oils |
| DIN 51506-1985 | 潤滑劑.有和無添加劑的ＶＢ和ＶＣ型以及ＶＤＬ型潤滑油.分類和要求 | Lubricants; VB and VC lubricating oils with and without additives and VDL lubricating oils; classification and requirements |
| DIN 51509-1-1976 | 齒輪潤滑劑的選擇.齒輪潤滑油 | Selection of lubricants for gears; gear lubricating oils |
| DIN 51509-2-1988 | 潤滑劑.齒輪傳動用潤滑劑的選擇.第2部分:半流體潤滑劑 | Lubricants; selection for lubricants for gears; semi-fluid lubricants |
| DIN 51514-1996 | 潤滑劑試驗.壓力管法測定制冷劑中制冷機油的混合空隙 | Testing of lubricants - Determination of the mixture gap of refrigerator oil in refrigerants by pressure tube method |
| DIN 51515-1-2001 | 汽輪機用潤滑劑和調速液規范.第1部分:一般應用的L-TD.規范 | Lubricants and governor fluids for turbines - Specifications - Part 1: L-TD for normal service; Specifications |
| DIN 51515-2-2004 | 汽輪機用潤滑劑和調速液.第2部分:高溫服務用L-TG規范 | Lubricants and governor fluids for turbines - Part 2: L-TG for higher temperature service, Specifications |
| DIN 51517-1-2004 | 潤滑劑.潤滑油.第1部分:潤滑油C.要求 | Lubricants - Lubricating oils - Part 1: Lubricating oils C; Requirements |
| DIN 51517-2 Berichtigung 1-2005 | CL型潤滑油.第2部分:要求和試驗.對DIN 51517-2-2004勘誤1 | Type CL lubricating oils - Part 2: Requirements and testing, Corrigendum 1 to DIN 51517-2:2004-01 |
| DIN 51517-2-2004 | 潤滑劑.潤滑油.第2部分:CL型潤滑油.規范 | Lubricants - Lubricating oils - Part 2: Lubricating oils CL; Specifications |
| DIN 51517-3 Berichtigung 1-2005 | CLP型潤滑油.第3部分:要求和試驗.對DIN 51517-3-2004的勘誤1 | Type CLP lubricating oils - Part 3: Requirements and testing, Corrigendum 1 to DIN 51517-3:2004-01 |
| DIN 51517-3-2004 | 潤滑劑.潤滑油.第3部分:潤滑油CLP.規范 | Lubricants - Lubricating oils - Part 3: Lubricating oils CLP; Specifications |
| DIN 51519-1998 | 潤滑劑.工業用液體潤滑劑的ISO粘度分類 | Lubricants - ISO viscosity classification for industrial liquid lubricants |
| DIN 51520-1995 | 潤滑劑.金屬加工流體.純切割潤滑油 (不含水流體) SN.規范 | Lubricants - Metalworking fluids - Straight cutting oils (non aqueous fluids) SN; specifications |
| DIN 51521-1999 | 潤滑劑.金屬加工潤滑油.摻水金屬加工潤滑油SE.規范 | Lubricants - Metal working fluids - Water mix metal working fluids SE; specifications |
| DIN 51538-1998 | 潤滑劑試驗.冷凍機油耐氨性能的試驗 | Testing of lubricants - Testing of resistance of refrigerator oils to ammonia |
| DIN 51551-1-1993 | 潤滑劑和液體燃料的檢驗.用Conradson法測定殘余碳 | Testing of lubricants and liquid fuels; determination of the carbon residue; Conradson method |
| DIN 51574-2004 | 潤滑劑檢驗.內燃機潤滑油取樣 | Testing of lubricants - Sampling of lubricating oils from internal combustion engines |
| DIN 51589-1-1991 | 第1部分:潤滑油脫水能力和液體接觸蒸汽后低可燃性的測定 | Determination of water separation ability of lubricating oils and low-flammability fluids after contact with steam |
| DIN 51784-1983 | 液體燃料檢驗.通過用蒸汽噴射法測定油氣中析出膠質含量的試驗來測定加潤滑油的氣油中潤滑劑的含量 | Testing of liquid fuels; determination of content of lubricating oils of lubricated petrol on the determination of test gum content in hydrocarbons by jet evaporation |
| DIN 51802-1990 | 潤滑脂的試驗.用ＳＫＦ－Ｅmcor方法進行潤滑脂防腐性能試驗. | Testing lubricating greases for their corrosion-inhibiting properties by the SKF Emcor method |
| DIN 51805-1974 | 潤滑劑試驗.潤滑脂流動壓力的測定.耐蝕試驗（Ｋesternich ）法 | Testing of lubricants; determination of flow pressure of lubricating greases, Kesternich method |
| DIN 51807-1-1979 | 潤滑劑檢驗.在有水的情況下潤滑脂性能的測定.靜態檢驗 | Testing of lubricants; Test of the behaviour of lubricating greases in the presence of water; Static test |
| DIN 51807-2-1990 | 潤滑劑的檢驗.在有水的情況下潤滑脂性能的檢驗.動態試驗 | Testing of lubricants; test on the behaviour of greases in the presence of water; dynamic test |
| DIN 51808-1978 | 潤滑劑檢驗.潤滑劑抗氧化性的測定.氧氣法 | Testing of lubricants; determination of oxidation stability of greases, oxygen method |
| DIN 51810-1-2007 | 潤滑劑測試.用旋轉粘度計測定潤滑脂的剪切粘度.第1部分:錐/板系統 | Testing of lubricants - Determination of shear viscosity of lubricating greases by rotational viscosimeter - Part 1: System of cone/plate |
| DIN 51811-1991 | 潤滑劑試驗.潤滑脂對銅腐蝕作用的試驗.銅帶去光澤試驗 | Testing of lubricants; testing of corrosiveness to copper of greases; copper strip tarnish test |
| DIN 51813-1989 | 潤滑脂固體物質(顆粒大小超過25μm)含量的測定 | Determination of solid matter content of lubricating greases (particle sizes above 25 m) |
| DIN 51814-1981 | 潤滑劑檢驗.潤滑脂中礦物油百分含量和皂質成份的測定.滲析法 | Testing of lubricants; determination of mineral oil fraction and soap of lubricating greases; dialysis method |
| DIN 51815-1-1981 | 潤滑劑檢驗.潤滑脂中鋰.鈉.鈣含量的測定.原子吸收光譜法 | Testing of lubricants; determination of the content of lithium, sodium and calcium of greases; determination by atomic absorption spectroscopy |
| DIN 51817-1998 | 潤滑劑試驗.靜態條件下從潤滑脂中分離出油的測定 | Testing of lubricants - Determination of oil separation from greases under static conditions |
| DIN 51818-1981 | 潤滑劑.潤滑脂稠度分類.NLGI等級 | Lubricants; consistency classification of lubricating greases; NLGI grades |
| DIN 51819-1-1999 | 潤滑脂檢驗.滾柱軸承試驗儀FE8中的機械-動脂試驗.第1部分:一般工作原理 | Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 1: General working principles |
| DIN 51819-2-1999 | 潤滑脂檢驗.滾柱軸承試驗儀FE8中的機械-動載荷試驗.第2部分:斜向滾珠軸承或錐形滾柱軸承潤滑脂試驗方法 | Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 2: Test method for lubricating greases, oblique ball bearing or tapered roller bearing |
| DIN 51819-3-2005 | 潤滑劑的試驗.滾柱軸承試驗儀FE8中的機械-動態試驗.第5部分:軸向滾柱軸承用潤滑油的試驗方法 | Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 3: Test method for lubricating oils, axial cylindrical roller bearing |
| DIN 51820-1-1989 | 潤滑劑檢驗.采用紅外線光譜測定法對潤滑脂的分析.第3部分:拍攝和分析紅外線光譜 | Testing of lubricants; analysis of greases by infrared spectrometry; taking and evaluating an infrared spectrum |
| DIN 51821-1-1988 | 潤滑劑的檢驗.使用 FAG 滾動軸承潤滑脂檢驗機 FE9 試驗.第1部分:一般工作原則 | Testing of lubricants; test using the FAG roller bearing grease testing apparatus FE9; general working principles |
| DIN 51821-2-1989 | 潤滑劑的檢驗.使用 FAG 滾動軸承潤滑脂檢驗機 FE9 試驗.第2部分:試驗方法 A/1500/6000 | Testing of lubricants; test using the FAG roller bearing grease testing apparatus FE9; test method A/1500/6000 |
| DIN 51825-2004 | 潤滑劑.潤滑脂K.分類和要求 | Lubricants - Lubricating greases K - Classification and requirements |
| DIN 51826-2005 | 潤滑劑.潤滑脂G.分類和要求 | Lubricants - Lubricating greases G - Classification and requirements |
| DIN 51828-1-2000 | 潤滑劑和相關產品檢驗.快速生物降解能力測定.第1部分:總則 | Testing of lubricants and related products - Determination of the rapid biodegradability - Part 1: General |
| DIN 51834-1-2004 | 潤滑劑檢驗.移動式振動檢驗儀中的摩擦試驗.第1部分:一般工作原理 | Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 1: General working principles |
| DIN 51834-2-2004 | 潤滑劑檢驗.移動式振動檢驗儀中的摩擦試驗.第2部分:測定潤滑油的摩擦值和磨損值 | Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 2: Determination of friction and wear data for lubricating oils |
| DIN 51834-3-2001 | 潤滑劑檢驗.移動式振動檢驗儀摩擦檢驗.第3部分:與潤滑劑聯合使用的材料摩擦特性測定 | Testing of lubricants - Tribological test in translatory oscillation apparatus - Part 3: Determination of tribological behaviour of materials in co-operation with lubricants |
| DIN 58395-1976 | 光學儀器用潤滑劑的溫度范圍 | Temperature ranges for lubricants for optical instruments |
| DIN 58396-2-1977 | 光學儀器用潤滑脂.第2部分:最低要求 | Greases for optical instruments; minimum requirements |
| DIN 58397-1-1983 | 精密機械和光學儀器用潤滑脂的檢驗.汽化損失 | Testing of lubricating greases for precision engineering and optical instruments; evaporation loss |
| DIN 58397-2-1983 | 精密機械和光學儀器用潤滑脂的檢驗.涂鋪 | Testing of lubricating greases for precision engineering and optical instruments; spreading |
| DIN 62136-1 Bb.1-2000 | 紡織機械和附件.緯編獨立針織機用針和沉降片潤滑油.第1部分:礦物油基潤滑油的最低要求.塑料制機械零件耐針 | Textile machinery and accessories - Needle and sinker lubricating oils for weft knitting independent needle machines - Part 1: Minimum requirements of mineral oil based; examples for resistance of machine parts made from plastics against needle and sinker lubricating oils |
| DIN 62136-1-2000 | 紡織機械和附件.緯編獨立針織機用針和沉降片潤滑油.第1部分:礦物油基潤滑油的最低要求 | Textile machinery and accessories - Needle and sinker lubricating oils for weft knitting independent needle machines - Part 1: Minimum requirements of mineral oil based |
| DIN 62136-2 Bb.1-2004 | 紡織機械和附件.緯編獨立單針刺繡機用針和沉降片潤滑油.第2部分:合成油的最低要求.塑料制機械零件耐針和沉 | Textile machinery and accessories - Needle and sinker lubrication oils for weft knitting independent needle machines - Part 2: Minimum requirements of synthetic oil based - Examples for resistance of machine parts made from plastics against needle and sinker lubrication oils |
| DIN 62136-2-2004 | 紡織機械和附件.緯編獨立單針刺繡機用針和沉降片潤滑油.第2部分:合成油的最低要求 | Textile machinery and accessories - Needle and sinker lubricating oils for weft knitting independent needle machines - Part 2: Minimum requirements synthetic oil based |
| DIN 6267-1971 | 內燃機潤滑方法 | Methods of lubrication for internal combustion engines |
| DIN 65298-1988 | 航空航天.旋轉軸用長期潤滑的滾針軸承支承的萬向節.單接點.連接尺寸.負荷.質量 | Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; single joints; connection dimensions, loads, masses |
| DIN 65299-1988 | 航空航天.旋轉軸用長期潤滑的滾針軸承支承的萬向節.雙萬向軸.連接尺寸.負荷.質量 | Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; double joints; connection dimensions, loads masses |
| DIN 65300-1988 | 航空航天.旋轉軸用長期潤滑的滾針軸承支承的萬向節.技術規范 | Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; technical specification |
| DIN 6594-1998 | 轉位式刀片用符合DIN 69893-1 A型要求的帶空心錐桿和冷卻潤滑劑導槽的鉆頭.主要尺寸 | Drills with hollow taper shanks and coolant fluid supply according to DIN 69893-1 type A for indexable inserts - Main dimensions |
| DIN 6596-1998 | 轉位式刀片用符合DIN 69893-1 A型要求的帶空心錐桿和冷卻潤滑劑導槽的鉆頭.標識 | Drills with hollow taper shanks and coolant fluid supply according to DIN 69893-1 type A for indexable inserts - Designation |
| DIN 69001-17-1981 | 機床.多軸頭.組合式A型潤滑油泵 | Machine tools; multi-spindle heads; building blocks lubrication pumps form A |
| DIN 71412-1987 | 錐形潤滑劑注油嘴 | Lubricating nipples; cone type |
| DIN 71455-1980 | 旁路潤滑油過濾器的濾芯.尺寸 | Filter inserts for lubrication oil filters, by-pass; dimensions |
| DIN 71457-1978 | 全流離心式潤滑油過濾器 | Spin-on filters for lubrication oil, full flow |
| DIN 75203-1988 | 商用汽車的自動集中潤滑系統 | Automatic centralized lubrication systems for commercial vehicles |
| DIN 8659-1-1980 | 機床.第1部分:機床用潤滑油、潤滑油用法說明 | Machine tools; lubrication of machine tools, lubrication instructions |
| DIN 8659-2-1980 | 機床.機床的潤滑.切削加工機床用潤滑劑的選擇 | Machine tools; lubrication of machine tools, selection of lubricants for machine tools operating by removing metal |
| DIN EN 12081-1998 | 鐵道應用.軸箱.潤滑脂 | Railway applications - Axleboxes - Lubricating greases; German version EN 12081:1998 |
| DIN EN 12634-1999 | 石油制品和潤滑劑.酸值的測定.無水介質電位滴定分析法 | Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method; German version EN 12634:1998 |
| DIN EN 14865-2-2006 | 鐵路設施.軸套潤滑油.第2部分:確保機車速度達到200km/h的機械穩定性試驗的辦法 | Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h English version of DIN EN 14865-2:2006-06 |
| DIN EN 15199-1-2007 | 石油產品.用氣相色譜法測定沸程分布.第1部分:中間餾出物和潤滑基礎油 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils; English version of DIN EN 15199-1:2007-01 |
| DIN EN 2022-1989 | 航空航天.輕型系列、帶自潤滑內襯的耐蝕鋼制關節軸承.尺寸和負荷 | Aerospace; bearings, spherical plain, in corrosion resisting steel, with self-lubricating liner, light series; dimensions and loads |
| DIN EN 2023-1989 | 航空航天.公稱系列、帶自潤滑內襯的耐蝕鋼制關節軸承.尺寸和負荷 | Aerospace series; bearings, spherical plain in corrosion resisting steel, with self-lubricating liner, normal series; dimensions and loads |
| DIN EN 2064-1992 | 航空航天.帶潤滑襯套的不銹鋼關節軸承.技術規范 | Aerospace series; bearings spherical plain in corrosion resisting steel with self lubricating liner; technical specification; german version EN 2064:1992 |
| DIN EN 2068-1996 | 航空航天系列.帶關節軸承和自潤滑涂層的吊環端頭.交貨技術條件 | Aerospace series - Rod ends with self-lubricating, self-aligning bearings - Technical specification; German version EN 2068:1996 |
| DIN EN 2264-1996 | 航空航天系列.合金鋼鍍鎘MoS2潤滑帶各種深度圓柱形沉頭孔雙面法蘭活動式自鎖鉚接螺母.等級:900MPa(室溫)/23 | Aerospace series - Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2264:1996 |
| DIN EN 2285-1990 | 航空航天系列.帶自潤滑襯料的鋁合金制普通襯套.尺寸和負載 | Aerospace series; bushes plain, aluminium alloy, with self-lubricating liner; dimensions and loads; german version EN 2285:1989 |
| DIN EN 2286-1990 | 航空航天系列.帶自潤滑襯料的鋁合金制有法蘭襯套.尺寸和負載 | Aerospace series; bushes flanged, aluminium alloy, with self-lubricating liner; dimensions and loads; German version EN 2286:1989 |
| DIN EN 2287-1990 | 航空航天系列.帶自潤滑襯料耐蝕鋼制普通襯套.尺寸和負載 | Aerospace series; bushes, plain, corrosion resisting steel, with self-lubricating liner; dimensions and loads; german version EN 2287:1989 |
| DIN EN 2288-1990 | 航空航天系列.帶自潤滑襯料耐蝕鋼制有法蘭的套筒.尺寸和負載 | Aerospace series; bushes, flanged, corrosion resisting steel, with self-lubricating liner; dimensions and loads; german version EN 2288:1989 |
| DIN EN 2311-1988 | 航空航天.帶自潤滑襯墊軸瓦.交貨技術條件 | Aerospace series; bushes with self-lubricating liner; technical specification |
| DIN EN 2491-1997 | 航空航天系列.二硫化鉬基干膜潤滑材料.涂覆方法 | Aerospace series - Molybdenum disulphide dry lubricants - Coating methods; German version EN 2491:1997 |
| DIN EN 2498-1991 | 航空航天系列.紋螺桿的自潤滑襯層的自校準關節軸承的可調操縱桿端頭.尺寸和負荷 | Aerospace series; rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank; dimensions and loads |
| DIN EN 2501-1989 | 航空航天.寬內環的帶自潤滑內襯的耐蝕鋼制關節軸承.尺寸和負荷 | Aerospace series; bearings, spherical plain in corrosion resisting steel, with self-lubricating liners and wide inner ring; dimensions and loads |
| DIN EN 2549-2007 | 航空航天系列.加 MoS<下標2> 潤滑劑的陽極氧化鈦合金短螺紋公稱六角緊公差螺栓.等級:1100MPa(室溫)/315℃ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated, metric series - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 2549:2006 |
| DIN EN 2584-2002 | 航空航天系列.帶自動潤滑內襯的耐腐蝕鋼制球面滑動軸承.窄系列:室溫下提高的負荷:尺寸和負載; 德文版本 EN | Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series; Elevated loads at ambient temperature; Dimensions and loads; German version EN 2584:2001 |
| DIN EN 2585-2006 | 航空航天系列.室溫條件下高負荷、寬系列、帶自潤滑襯套的耐蝕鋼關節軸承.尺寸和負載 | Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 2585:2001 |
| DIN EN 2647-2007 | 航空航天系列.鍍隔合金鋼加 MoS<下標2> 潤滑劑的球形座自鎖六角螺母.等級:900MPa(環境溫度)/235℃ | Aerospace series - Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2647:2006 |
| DIN EN 2680-2007 | 航空和航天系列.米制系列MOS2潤滑的鈍化鍍鎘合金鋼雙耳自準、鎖緊浮動地腳螺母.等級:900MPa/235℃ | Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS<(Index)2> lubricated, metric series - Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2680:2006 |
| DIN EN 2753-1996 | 航空航天系列.合金鋼鍍鎘MoS(角注2)潤滑帶圓柱形沉頭孔單面法蘭自鎖鉚接螺母.等級 1100MPa(室溫)/235℃ | Aerospace series - Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 2753:1996 |
| DIN EN 2790-1991 | 航空航天系列.嚙合長度為螺紋直徑1.5倍的螺紋桿的帶自潤滑內襯的自校準的可調節控制桿端部.尺寸和負載 | Aerospace series; rod-ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank, with engagement: 1,5 × thread diameter; dimensions and loads; german version EN 2790:1991 |
| DIN EN 2870-1996 | 航空航天系列.鈦合金陽極化MoS2潤滑十二角緊配合螺絲.等級 1100MPa(室溫)/315℃ | Aerospace series - Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2870:1996 |
| DIN EN 2881-2007 | 航空和航天系列.米制系列MOS2潤滑的鈍化耐腐蝕、耐燃鋼沉頭雙耳密封鎖緊浮動地腳螺母.等級:900MPa/120℃ | Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS<(Index)2> lubricated, metric series - Classification: 900 MPa (at ambient temperature)/120 °C; German and English version EN 2881:2006 |
| DIN EN 2884-1996 | 航空航天系列.MoS2潤滑陽極化鈦合金短螺紋帶翼型十字槽平頭螺釘.等級:1100MPa(室溫)/315℃ | Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated, classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2884:1996 |
| DIN EN 3026-1994 | 航空航天.干膜潤滑的試驗方法.鋼試樣的腐蝕試驗 | Aerospace series; test method for dry film lubricants; corrosion test on steels specimens; German version EN 3026:1994 |
| DIN EN 3027-1994 | 航空航天.干膜潤滑的試驗方法.鹽霧試驗 | Aerospace series; test method for dry film lubricants; salt spray test; German version EN 3027:1994 |
| DIN EN 3030-1994 | 航空航天.干膜潤滑的試驗方法.固體含量 | Aerospace series; test method for dry film lubricants; solids content; German version EN 3030:1994 |
| DIN EN 3032-1994 | 航空航天.干膜潤滑的試驗方法.厚度測量 | Aerospace series; test method for dry film lubricants; thickness measurement; German version EN 3032:1994 |
| DIN EN 3048-2006 | 航空航天系列.室溫條件下高負荷、輕系列、帶自潤滑襯套的耐蝕鋼關節軸承.尺寸和負載 | Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 3048:2001 |
| DIN EN 3306-1996 | 航空航天系列.鈦合金陽極化MoS2潤滑短螺紋接近頂點帶翼形十字槽的100度沉頭螺絲.等級: 1100MPa/315℃ | Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3306:1996 |
| DIN EN 3308-1996 | 航空航天系列.鈦合金陽極化MoS2潤滑螺紋接近頂點的六角螺絲.等級:1100MPa/315℃ | Aerospace series - Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3308:1996 |
| DIN EN 3536-2007 | 航空航天系列.MoS<(指數)2>潤滑的自鎖耐熱鋼六角螺母.等級:1100MPa(室溫)/315℃ | Aerospace series - Nuts, hexagon, self-locking, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 3536:2006 |
| DIN EN 3626-2007 | 航空航天系列.MoS<(指數)2>潤滑的鍍鎘鋼制自鎖六角螺母.等級:1100MPa(室溫)/235℃ | Aerospace series - Nuts, hexagon, self-locking in steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 3626:2006 |
| DIN EN 3712-2007 | 航空航天系列.MoS2潤滑的鍍鎘鋼制沉孔縮徑固定式單耳自鎖緊系緊螺母.分類:1100MPa(室溫)/235℃ | Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 3712:2007 |
| DIN EN 377-1999 | 非工業加工使用的燃?xì)馄骶呒捌湔{(diào)節裝置的潤滑劑 | Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes (includes Amendment A1:1996); German version EN 377:1993 + A1:1996 |
| DIN EN 3820-2007 | 航空航天系列.MoS2潤滑的陽極化鈦合金短螺紋標準桿粗公差普通六角頭米制螺釘.等級:1100MPa(室溫下)/315℃ | Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 3820:2006 |
| DIN EN 4040-2006 | 航空航天.寬內環的帶自潤滑內襯的耐蝕鋼制關節軸承.室溫高負荷.尺寸和負荷 | Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring - Elevated loads at ambient temperature - Dimensions and loads; German and English version EN 4040:2006 |
| DIN EN 4198-2007 | 航空航天系列.耐腐蝕鋼帶自潤滑襯墊和螺紋柄的可調自動對心滑動軸承的桿端.尺寸和載荷 | Aerospace series - Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel - Dimensions and loads; German and English version EN 4198:2006 |
| DIN EN 4311-2007 | 航空航天系列.MoS<(指數)2>潤滑耐高溫和耐腐蝕鋼的中長螺紋粗公差遞減柄螺栓.等級:1100MPa(室溫)/315℃ | Aerospace series - Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 4311:2006 |
| DIN EN 4591-2007 | 航空航天系列.MoS2潤滑的耐高溫鎳基合金不固定式自準自鎖緊圓筒螺母.分類:1550MPa(室溫)/315℃ | Aerospace series - Nuts, barrel, self-locking, floating, self-aligning, in heat resisting nickel base alloy, MoS<(Index)2> lubricated - Classification: 1550 MPa (at ambient temperature)/315 °C; German and English version EN 4591:2005 |
| DIN EN 50326-2003 | 架空線路導線.潤滑脂特性; 德文版本 EN 50326:2002 | Conductors for overhead lines - Characteristics of greases; German version EN 50326:2002 |
| DIN EN 61221-2005 | 石油產品和潤滑劑.三芳基磷酸酯渦輪機控制液(ISO-L-TCD類).規范 | Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications (IEC 61221:2004); German version EN 61221:2004 |
| DIN EN ISO 10438-1-2005 | 石油、石油化學和天然氣工業.潤滑、油封、控油系統和輔助裝置.第1部分:一般要求 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2003); English version EN ISO 10438-1:2003 |
| DIN EN ISO 10438-2-2005 | 石油、石油化學和天然氣工業.潤滑、油封、控油系統和輔助裝置.第2部分:專用油系統 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2: Special-purpose oil systems (ISO 10438-2:2003); English version EN ISO 10438-2:2003 |
| DIN EN ISO 10438-3-2005 | 石油、石油化學和天然氣工業.潤滑、油封、控油系統和輔助裝置.第3部分:通用油系統 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems (ISO 10438-3:2003); English version EN ISO 10438-3:2003 |
| DIN EN ISO 10438-4-2005 | 石油、石油化學和天然氣工業.潤滑、油封、控油系統和輔助裝置.第4部分:自動氣封支撐系統 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 4: Self-acting gas seal support systems (ISO 10438-4:2003); English version EN ISO 10438-4:2003 |
| DIN EN ISO 12922-2002 | 潤滑劑、工業用油和相關產品(L級).H類(液壓體系).HFAE、 HFAS、HFB、HFC、HFDR和HFDU的目錄規范 (ISO 12922 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:1999, including Technical Corrigendum 1:2001); German version EN ISO 12922:2002 |
| DIN EN ISO 13944-2006 | 含潤滑劑的金屬粉末混合物.潤滑劑含量測定.改進的索格利特萃取法 | Lubricated metal-powder mixes - Determination of lubricant content - Modified Soxhlet extraction method (ISO 13944:1996); English version of DIN EN ISO 13944:2006-06 |
| DIN EN ISO 21469-2006 | 機械安全.與附屬產品接觸的潤滑劑.衛生要求 | Safety of machinery - Lubricants with incidental product contact - Hygiene requirements (ISO 21469:2006); English version of DIN EN ISO 21469:2006-05 |
| DIN EN ISO 6743-4-2002 | 潤滑劑、工業用潤滑油和相關產品(L類).分類.第4部分:H族(液壓系統) | Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4:1999); German version EN ISO 6743-4:2001 |
| DIN ISO 10792-2-1996 | 航空航天.帶自動潤滑層的耐腐蝕鋼制機身球面滑動軸承.第2部分:英制系列 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 2: Inch series; identical with ISO 10792-2:1995 |
| DIN ISO 10792-3-1996 | 航空航天.帶自動潤滑層的耐腐蝕鋼制機身球面滑動軸承.第3部分:交貨技術條件 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 3: Technical specification; identical with ISO 10792-3:1995 |
| DIN ISO 11009-2007 | 石油產品和潤滑劑.潤滑脂水沖特性的測定 | Petroleum products and lubricants - Determination of water washout characteristics of lubricating greases (ISO 11009:2000) |
| DIN ISO 12128-1998 | 滑動軸承.潤滑孔、潤滑槽和潤滑襯套.軸承套的尺寸、類型、命名及應用 | Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes; Identical with ISO 12128:1995 |
| DIN ISO 12156-1-1999 | 柴油燃料.高頻率往復設備(HFRR)用潤滑劑性能評定.第1部分:試驗方法 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:1997) |
| DIN ISO 15380-2004 | 潤滑油、工業用油和相關產品(L級).H族(液壓系統).HETG、HEPG、HEES和HEPR類規范說明 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HETG, HEPG, HEES and HEPR (ISO 15380:2002) |
| DIN ISO 2137-1997 | 石油產品.潤滑脂和礦脂.錐入度測定 | Petroleum products - Lubricating grease and petrolatum Determination of cone penetration (ISO 2137:1985) |
| DIN ISO 2176-1997 | 石油產品.潤滑脂.滴點測定 | Petroleum products - Lubricating grease - Determination of dropping point (ISO 2176:1995) |
| DIN ISO 3547-3-2000 | 滑動軸承.卷制軸套.第3部分:潤滑油孔、油槽和油穴 | Plain bearings - Wrapped bushes - Part 3: Lubrication holes, lubrication grooves and lubrication indentations (ISO 3547-3:1999) |
| DIN ISO 413-1987 | 航空航天.潤滑油加油管嘴頭 | Aircraft; heads of lubricating nipples; identical with ISO 413, edition 1974 |
| DIN ISO 4378-3-1999 | 關節軸承.術語、定義和分類.第3部分:潤滑 | Plain bearings - Terms, definitions and classification - Part 3: Lubrication (ISO 4378-3:1983) |
| DIN ISO 5170-1980 | 機床.潤滑系統 | Machine tools; lubrication systems |
| DIN ISO 6415-1992 | 內燃機.潤滑油旋接式油濾.尺寸 | Internal combustion engines; spin-on filters for lubricating oil; dimensions; identical with ISO 6415:1990 |
| DIN ISO 6743-0-1991 | 潤滑劑、工業用潤滑油和有關產品(L類).分類.總則 | Lubrificants, industrial oils and related products (class L); classification; general; identical with ISO 6743-0:1981 |
| DIN ISO 6743-12-1995 | 潤滑劑、工業用油和相關產品(L 類).分類.第12部分:Q 系列(傳熱流體); 等同采用 ISO 6743-12:1989 | Lubricants, industrial oils and related products (class L) - Classification - Part 12: Family Q (heat transfer fluids); identical with ISO 6743-12:1989 |
| DIN ISO 7120 Berichtigung 1-2007 | 石油產品和潤滑劑.石油潤滑油和其他液體.在含水情況下防銹特性的測定.DIN ISO 7120-2000技術勘誤 | Petroleum products and lubricants - Petroleum oils and other fluids - Determination of rust-preventing characteristics in the resence of water (ISO 7120:1987), Corrigenda to DIN ISO 7120:2000-05 |
| DIN ISO 7120-2000 | 石油產品和潤滑劑.石油潤滑油和其他液體.在含水情況下防銹性能的測定 | Petroleum products and lubricants - Petroleum oils and other fluids - Determination of rust-preventing characteristics in the presence of water (ISO 7120:1987) |
| DIN ISO 7905-1-1998 | 關節軸承.軸承疲勞強度.第1部分:液體潤滑條件下在試驗臺上的和使用中的關節軸承 | Plain bearings - Bearing fatigue - Part 1: Plain bearings in test rigs and in applications under conditions of hydrodynamic lubrication (ISO 7905-1:1995) |
| 編號 | 中文名稱 | 英文名稱 |