| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 60962-1988 | 汽輪機用石油潤滑油的維護與使用指南 | Maintenance and use guide for petroleum lubricating oils for steam turbines |
| IEC 61221-2004 | 石油產品和潤滑劑.三芳基磷酸酯渦輪機控制液(ISO-L-TCD類).規范 | Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications |
| ISO 10050-2005 | 潤滑劑、工業潤滑油和相關產品（L類）.T（渦輪機）族.三芳基磷酸脂渦輪機控制液體規范(類別 ISO-L-TCD) | Lubricants, industrial oils and related products (class L) - Family T (Turbines) - Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD) |
| ISO 10129-2006 | 滑動軸承.軸承金屬的試驗.靜態條件下潤滑油的耐腐蝕性 | Plain bearings - Testing of bearing metals - Resistance to corrosion by lubricants under static conditions |
| ISO 10438-1-2003 | 石油、化工和天然氣工業.潤滑、油封、控油系統和輔助裝置.第1部分:一般要求 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements |
| ISO 10438-2-2003 | 石油、化工和天然氣工業.潤滑、油封、控油系統和輔助裝置.第2部分:專用油系統 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2: Special-purpose oil systems |
| ISO 10438-3-2003 | 石油、化工和天然氣工業.潤滑、油封、控油系統和輔助裝置.第3部分:通用油系統 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems |
| ISO 10438-4-2003 | 石油、化工和天然氣工業.潤滑、油封、控油系統和輔助裝置.第4部分:自動氣封支撐系統 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 4: Self-acting gas seal support systems |
| ISO 10792-1-1995 | 航空航天 飛機結構用不銹鋼自潤滑球面滑動軸承 第1部分:米制系列 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 1: Metric series |
| ISO 10792-2-1995 | 航空航天 飛機結構用不銹鋼自潤滑球面滑動軸承 第2部分:英制系列 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 2: Inch series |
| ISO 10792-3-1995 | 航空航天 飛機結構用不銹鋼自潤滑球面滑動軸承 第3部分:技術規范 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 3: Technical specification |
| ISO 11007-1997 | 石油產品和潤滑劑 潤滑脂防銹性能的測定 | Petroleum products and lubricants - Determination of rust-prevention characteristics of lubricating greases |
| ISO 11009-2000 | 石油產品和潤滑劑 潤滑脂抗水淋特性的測定 | Petroleum products and lubricants - Determination of water washout characteristics of lubricating greases |
| ISO 11158-1997 | 潤滑劑、工業潤滑油和有關產品(L類) H組(液壓系統) HH、HL、HM、HR、HV和HG各品種的規格 | Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HH, HL, HM, HR, HV and HG |
| ISO 12128-2001 | 滑動軸承 潤滑油孔、油槽和油穴 尺寸、類型、標記及其應用 | Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes |
| ISO 12156-1-2006 | 柴油.使用高頻往復裝置(HFRR)進行潤滑油評定.第1部分:試驗方法 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method |
| ISO 12156-2-2007 | 柴油.使用高頻往復裝置(HFRR)進行潤滑評估.第2部分:限值 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 2: Limit |
| ISO 12167-1-2001 | 滑動軸承 靜態條件下帶有排泄槽的液壓滑動軸頸軸承 第1部分：帶有排泄槽的潤滑油滑動軸頸軸承的計算 | Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves |
| ISO 12167-2-2001 | 滑動軸承 靜態條件下帶有排泄槽的液壓滑動軸頸軸承 第2部分：帶有排泄槽的潤滑油滑動軸頸軸承的計算用特 | Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves |
| ISO 12168-1-2001 | 滑動軸承 靜態條件下不帶排泄槽的液壓滑動軸頸軸承 第1部分：不帶排泄槽的潤滑油滑動軸頸軸承的計算 | Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves |
| ISO 12168-2-2001 | 滑動軸承 靜態條件下不帶排泄槽的液壓滑動軸頸軸承 第1部分：不帶排泄槽的潤滑油滑動軸頸軸承的計算用特 | Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings without drainage grooves |
| ISO 12922 Technical Corrigendum 1-2001 | 潤滑劑、工業潤滑油和有關產品(L類) H組(液壓系統) HFAE、HFAS、HFB、HFC、HFDR和HFDU各品種的規格 技術勘 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU; Technical Corrigendum 1 |
| ISO 12922-1999 | 潤滑劑、工業潤滑油和有關產品(L類) H組(液壓系統) HFAE、HFAS、HFB、HFC、HFDR和HFDU各品種的規格 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
| ISO 12925-1 Technical Corrigendum 1-2002 | 潤滑劑、工業用油和相關產品(L類).(齒輪)C種.第1部分:密封齒輪系統用潤滑劑.技術勘誤1 | Lubricants, industrial oils and related products (class L) - Family C (Gears) - Part 1: Specifications for lubricants for enclosed gear systems; Technical Corrigendum 1 |
| ISO 12925-1-1996 | 潤滑劑、工業潤滑油和有關產品(L類) C組(齒輪) 第1部分:密式齒輪系統用潤滑劑規格 | Lubricants, industrial oils and related products (class L) - Family C (Gears) - Part 1: Specifications for lubricants for enclosed gear systems |
| ISO 13357-1-2002 | 石油產品.潤滑油可過濾性測定.第2部分:水中過濾油的程序 | Petroleum products - Determination of the filterability of lubricating oils - Part 1: Procedure for oils in the presence of water |
| ISO 13357-2-2005 | 石油產品.潤滑油的可過濾性測定.第2部分:干性油技術 | Petroleum products - Determination of the filterability of lubricating oils - Part 2: Procedure for dry oils |
| ISO 13737-2004 | 石油產品和潤滑劑.潤滑劑脂的低溫針入度的測定 | Petroleum products and lubricants - Determination of low-temperature cone penetration of lubricating greases |
| ISO 13738-2000 | 潤滑劑、工業潤滑油和有關產品(L類) E組(內燃機油) 二沖程汽油機油規格(EGB、EGC、EGD) | Lubricants, industrial oils and related products (class L) - Family E (Internal combustion engine oils) - Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD) |
| ISO 13944-1996 | 含潤滑劑的金屬粉末混合物 潤滑劑含量測定 索格利特萃取法 | Lubricated metal-powder mixes - Determination of lubricant content - Modified Soxhlet extraction method |
| ISO 14635-3-2005 | 齒輪.FZG試驗程序.第3部分:半流齒輪潤滑脂壓塑性變形承載能力和耐磨性用A/2、8/50 FZG試驗方法 | Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases |
| ISO 15380-2002 | 潤滑劑、工業用油和相關產品(L類).系列H(液壓系統).HETG, HEPG, HEES 和 HEPR類的規范 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HETG, HEPG, HEES and HEPR |
| ISO 18904-2000 | 成像材料 沖洗過的膠片 測定潤滑性方法 | Imaging materials - Processed films - Method for determining lubrication |
| ISO 19378-2003 | 潤滑劑、工業用油和相關產品(L級).機床潤滑劑.等級和規范 | Lubricants, industrial oils and related products (class L) - Machine-tool lubricants - Categories and specifications |
| ISO 2137-1985 | 石油產品 潤滑脂和石油脂 錐入度的測定 | Petroleum products; Lubricating grease and petrolatum; Determination of cone penetration |
| ISO 21469-2006 | 機械安全.與附屬產品接觸的潤滑劑.衛生要求 | Safety of machinery - Lubricants with incidental product contact - Hygiene requirements |
| ISO 2176 Technical Corrigendum 1-2001 | 石油產品 潤滑脂 滴點的測定 技術勘誤1 | Petroleum products - Lubricating grease - Determination of dropping point; Technical Corrigendum 1 |
| ISO 2176-1995 | 石油產品 潤滑脂 滴點的測定 | Petroleum products - Lubricating grease - Determination of dropping point |
| ISO 24254-2007 | 潤滑劑、工業用油和相關產品(L級).E族(內燃機油).四沖程循環摩托車汽油發動機和相關動力傳動系統用油的規范 | Lubricants, industrial oils and related products (class L) - Family E (internal combustion engine oils) - Specifications for oils for use in four-stroke cycle motorcycle gasoline engines and associated drivetrains (categories EMA and EMB) |
| ISO 3046-1-2002 | 往復式內燃機.性能.第1部分:功率、燃料消耗量和潤滑油消耗量和試驗方法說明.通用內燃機的附加要求 | Reciprocating internal combustion engines - Performance - Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods; Additional requirements for engines for general use |
| ISO 3156-1976 | 礦井提升用的絞合鋼絲繩 防銹劑、潤滑劑和維修保養 特性和試驗 | Stranded wire ropes for mine hoisting; Impregnating compounds, lubricants and service dressings; Characteristics and tests |
| ISO 3448 Technical Corrigendum 1-1993 | 工業液體潤滑劑.ISO粘度分級.技術勘誤1 | Industrial liquid lubricants - ISO vicosity classification; Technical Corrigendum 1 |
| ISO 3448-1992 | 工業液體潤滑劑 ISO粘度分級 | Industrial liquid lubricants; ISO vicosity classification |
| ISO 3547-3-2006 | 滑動軸承.卷制軸套.第3部分:潤滑油孔、油槽和油穴 | Plain bearings - Wrapped bushes - Part 3: Lubrication holes, grooves and indentations |
| ISO 3987-1994 | 石油產品 潤滑油和添加劑 硫酸鹽灰分的測定 | Petroleum products - Lubricating oils and additives - Determination of sulfated ash |
| ISO 413-1974 | 航空器 潤滑油加油管嘴的頭部 | Aircraft; Heads of lubricating nipples |
| ISO 4346-1977 | 一般用途鋼絲繩 潤滑劑 基本要求 | Steel wire ropes for general purposes; Lubricants; Basic requirements |
| ISO 4378-3-1983 | 滑動軸承 術語、定義和分類 第3部分:潤滑 三種語言版 | Plain bearings; Terms, definitions and classification; Part 3 : Lubrication Trilingual edition |
| ISO 5169-1977 | 機床 潤滑說明書的形式 | Machine tools; Presentation of lubrication instructions |
| ISO 5170-1977 | 機床 潤滑系統 | Machine tools; Lubrication systems |
| ISO 6247 Technical Corrigendum 1-1999 | 石油產品 潤滑油發泡特性的測定 技術勘誤1 | Petroleum products - Determination of foaming characteristics of lubricating oils; Technical Corrigendum 1 |
| ISO 6247-1998 | 石油產品 潤滑油發泡特性的測定 | Petroleum products - Determination of foaming characteristics of lubricating oils |
| ISO 6281-2007 | 滑動軸承.試驗機內流體動壓和混合潤滑條件下的測試 | Plain bearings - Testing under conditions of hydrodynamic and mixed lubrication in test rigs |
| ISO 6299-1998 | 石油產品 潤滑脂滴點(寬溫度范圍)的測定 | Petroleum products - Determination of dropping point of lubricating greases (wide temperature range) |
| ISO 6392-1-1996 | 土方機械 潤滑件 第1部分:油杯 | Earth-moving machinery - Lubrication fittings - Part 1: Nipple type |
| ISO 6392-2-1996 | 土方機械 潤滑件 第2部分:黃油槍噴嘴 | Earth-moving machinery - Lubrication fittings - Part 2: Grease-gun nozzles |
| ISO 6415-2005 | 內燃機.離心式潤滑油濾清器.尺寸 | Internal combustion engines - Spin-on filters for lubricating oil - Dimensions |
| ISO 6617-1994 | 石油基潤滑油 老化特性 氧化后殘?zhí)甲兓臏y定 | Petroleum-based lubricating oils - Ageing characteristics - Determination of change in Conradson carbon residue after oxidation |
| ISO 6618 Technical Corrigendum 1-1999 | 石油產品和潤滑劑.酸和中和堿值的測定.顏色指示劑滴定法.技術勘誤1 | Petroleum products and lubricants - Determination of acid or base number - Coulour-indicator titration method; Technical Corrigendum 1 |
| ISO 6618-1997 | 石油產品和潤滑劑 酸和中和堿值的測定 顏色指示劑滴定法 | Petroleum products and lubricants - Determination of acid or base number - Coulour-indicator titration method |
| ISO 6619-1988 | 石油產品和潤滑劑 中和值 電位滴定法 | Petroleum products and lubricants; neutralization number; potentiometric titration method |
| ISO 6743-1-2002 | 潤滑劑、工業用潤滑油和有關產品(L類).分類.第1部分:A 組(全損耗系統) | Lubricants, industrial oils and related products (class L) - Classification - Part 1: Family A (Total loss systems) |
| ISO 6743-10-1989 | 潤滑劑、工業潤滑油和有關產品(L類) 分類 第10部分:Y組(其他) | Lubricants, industrial oils and related products (class L); classification; part 10: family Y (miscellaneous) |
| ISO 6743-11-1990 | 潤滑劑、工業潤滑油和有關產品(L類) 分類 第11部分:P組(風動工具) | Lubricants, industrial oils and related products (class L); classification; part 11: family P (pneumatic tools) |
| ISO 6743-12-1989 | 潤滑劑、工業潤滑油和有關產品(L類) 分類 第12部分:Q組(熱傳導液體) | Lubricants, industrial oils and related products (class L); classification; part 12: family Q (heat transfer fluids) |
| ISO 6743-13-2002 | 潤滑劑、工業潤滑油和有關產品(L類).分類.第13部分:G組(導軌) | Lubricants, industrial oils and related products (class L) - Classification - Part 13: Family G (Slideways) |
| ISO 6743-14-1994 | 潤滑劑、工業潤滑油和有關產品(L類) 分類 第14部分:U組(熱處理) | Lubricants, industrial oils and related products (class L) - Classification - Part 14: Family U (Head treatment) |
| ISO 6743-2-1981 | 潤滑劑、工業潤滑油和有關產品(L類) 分類 第2部分:F組(錠子軸承、軸承和離合器) | Lubricants, industrial oils and related products (class L); Classification; Part 2 : Family F (Spindle bearings, bearings and associated clutches) |
| ISO 6743-3-2003 | 潤滑劑、工業用潤滑油和有關產品(L類).分類.第3部分:D組(壓縮機) | Lubricants, industrial oils and related products (class L) - Classification - Part 3: Family D (Compressors) |
| ISO 6743-4-1999 | 潤滑劑、工業潤滑油和有關產品(L類) 分類 第4部分:H組(液壓系統) | Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) |
| ISO 6743-5-2006 | 潤滑劑、工業潤滑油和相關產品(L類).分類.第5部分:T組(渦輪機) | Lubricants, industrial oils and related products (class L) - Classification - Part 5: Family T (Turbines) |
| ISO 6743-6-1990 | 潤滑劑、工業潤滑油和有關產品(L類) 分類 第6部分:C組(齒輪) | Lubricants, industrial oils and related products (class L); classification; part 6: family C (gears) |
| ISO 6743-7-1986 | 潤滑劑、工業潤滑油和有關產品(L類) 分類 第7部分:M組(金屬加工) | Lubricants, industrial oils and related products (class L); Classification; Part 7 : Family M (Metalworking) |
| ISO 6743-8-1987 | 潤滑劑、工業潤滑油和有關產品(L類) 分類 第8部分:R組(防腐蝕臨時保護) | Lubricants, industrial oils and related products (class L); Classification; Part 8: Family R (Temporary protection against corrosion) |
| ISO 6743-9-2003 | 潤滑劑、工業用潤滑油和相關產品(L類).分類.第9部分:X族(潤滑脂) | Lubricants, industrial oils and related products (class L) - Classification - Part 9: Family X (Greases) |
| ISO 6743-99-2002 | 潤滑劑、工業用潤滑油和有關產品(L類).分類.第99部分:總則 | Lubricants, industrial oils and related products (class L) - Classification - Part 99: General |
| ISO 7120-1987 | 石油產品和潤滑劑 石油原油和其他液體 水存在時防銹性能的測定 | Petroleum products and lubricants; Petroleum oils and other fluids; Determination of rust-preventing characteristics in the presence of water |
| ISO 7624-1997 | 石油產品和潤滑劑 加抑制劑礦物汽輪機油 氧化穩定性的測定 | Petroleum products and lubricants - Inhibited mineral turbine oils - Determination of oxidation stability |
| ISO 7747-1983 | 道路車輛 全流式潤滑油濾清器的濾芯 尺寸 | Road vehicles; Filter elements for full flow oil filters; Dimensions |
| ISO 7824-1986 | 造船及海上結構物 潤滑油嘴 錐型及平肩型 | Shipbuilding and marine structures; Lubrication nipples; Cone and flat types |
| ISO 7905-1-1995 | 滑動軸承 軸瓦疲勞強度 第1部分:在液體動壓潤滑條件下試驗臺和使用中的滑動軸承 | Plain bearings - Bearing fatigue - Part 1: Plain bearings in test rigs and in applications under conditions of hydrodynamic lubrication |
| ISO 7967-6-2005 | 往復式內燃機.零部件和系統詞匯.第6部分:潤滑系統 | Reciprocating internal combustion engines - Vocabulary of components and systems - Part 6: Lubricating systems |
| ISO 8068-2006 | 潤滑劑、工業潤滑油和相關產品（L類）.T族（渦輪機）.渦輪機用潤滑油規范 | Lubricants, industrial oils and related products (class L) - Family T (Turbines) - Specification for lubricating oils for turbines |
| ISO 8681-1986 | 石油產品和潤滑劑 分類法 等級的定義 | Petroleum products and lubricants; Method of classification; Definition of classes |
| ISO 9219-2002 | 航空航天.滑輪用合金鋼和鍍鎘或鈦合金鋼、MoS<下標2>潤滑或耐腐蝕鋼和鈍化的緊公差柄、短螺紋薄六角頭螺栓. | Aerospace - Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium-plated or in titanium alloy steel, MoS<(Index)2> lubricated or in corrosion-resistant steel and passivated - Dimensions and masses |
| ISO/TS 12927-1999 | 潤滑劑、工業潤滑油和有關產品(L級) M組(金屬加工) 制定標準導則 | Lubricants, industrial oils and related products (class L) - Family M (Metalworking) - Guidelines for establishing specifications |
| ISO/TS 12928-1999 | 潤滑劑、工業潤滑油和有關產品(L級) R組(暫時保護防腐) 制定標準導則 | Lubricants, industrial oils and related products (class L) - Family R (Products for temporary protection against corrosion) - Guidelines for establishing specifications |
| ISO/TS 23556-2007 | 去除潤滑油中柴油機煙灰用裝置的性能試驗方法.初始過濾效率 | Performance test method for diesel engine soot-removal devices in lubricating oils - Initial filtration efficiency |
| 編號 | 中文名稱 | 英文名稱 |