編號 |
中文名稱 |
英文名稱 |
NF C42-723-1996
|
測量、控制和試驗室用電氣設備的安全要求.第723部分:醫療材料處理及實驗室加工用蒸壓器的特殊要求
|
(Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-041 : particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes.)
|
NF C42-724-1997
|
測量、控制和實驗室用電氣設備的安全要求.第2-042部分:使用毒氣的實驗室處理和醫療材料處理用高壓釜和消毒
|
(Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-042 : particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials, and for laboratory processes.)
|
NF C42-726-1997
|
測量、控制和實驗室用電氣設備的安全要求.第2-043部分:使用熱空氣或熱惰性氣體的實驗室處理和醫療材料處理
|
(Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-043 : particular requirements for dry heat sterilizers using either hot air or inert gas for the treatment of medical materials, and for laboratory processes)
|
NF C42-739-2003
|
測量、控制和實驗室用電氣設備的安全要求.第2-101部分:實驗室診斷(IVD)醫療設備的特殊要求
|
(Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-101 : particular requirements for in vitro diagnostic (IVD) medical equipment.)
|
NF C52-558-2-15-2001
|
電力變壓器、供電裝置和類似設備的安全.第2-15部分:醫療場所供電隔絕變壓器的特殊要求
|
(Safety of power transformers, power supply units and similar - Part 2-15 : particular requirements for isolating transformers for the supply of medical locations.)
|
NF C71-025-1995
|
照明設備.第2部分:特殊要求.第25節:醫院和醫療保健中心臨床用燈具
|
(Luminaires. Part 2 : particular requirements. Section 25 : luminaires for use in clinical areas of hospitals and health care buildings.)
|
NF C74-0102-1993
|
醫用電氣設備.醫療電器的安全.第1部分:一般規則.修改件2
|
()
|
NF C74-012-1993
|
醫療電氣設備.第1部分:一般安全設備.附屬標準2:電磁兼容性.要求和試驗
|
(Medical electrical equipment. Part 1 : general equipments for safety 2. Collateral standard : electromagnetic compatibility. Requirements an tests.)
|
NF C74-0131-1996
|
醫療電氣設備.第1部分:一般安全要求.附屬標準2:醫療電子設備系統的安全要求.補充件1
|
()
|
NF C74-014-1994
|
醫療電氣設備.第1部分:安全的一般要求.第3節:附屬標準:X射線診斷設備輻射防護的一般要求
|
(Medical electrical equipment. Part 1 : general requirements for safety 3. Collateral standard : general requirements for radiation protection in diagnostic X-ray equipment.)
|
NF C74-043-2003
|
有關活性(包括活性可植入)醫療產品制造業的標準EN 29001和EN 46001及EN 29002和EN 46002的應用指南
|
(Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for the active (including active implantable) medical device industry.)
|
NF C74-114-1992
|
電、熱特殊和醫療診斷用的旋轉陽極射線管的充電特性
|
(Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnosis.)
|
NF C74-118-1993
|
醫用電氣設備.第2部分:醫療診斷設備用X射線源組件和X射線管組件的特殊安全要求
|
(Medical electrical equipment. Part 2 : particular requirements for the safety of X-ray source assemblies and X-ray tube assemblies for medical diagnosis.)
|
NF C74-122-1996
|
醫用電氣設備.第2部分:醫療診斷用磁共振設備安全特殊要求
|
(Medical electrical equipment. Part 2 : particular requirements for the safety of magnetic resonance equipment for medical diagnosis.)
|
NF C74-122/A11-2000
|
醫療電氣設備.第2部分:醫療診斷用磁共振設備安全的特殊要求
|
(Medical electrical equipment - Part 2 : particular requirements for the safety of magnetic resonance equipment for medical diagnosis.)
|
NF C74-134-1994
|
醫療放射科的評定和常規檢驗.第2-4部分:穩定性試驗.硬拷貝攝影機
|
(Evaluation and routine testing in medical imaging departments. Part 2-4 : constancy tests. Hard copy cameras.)
|
NF C74-135-1994
|
醫療放射科的評定和常規檢驗.第2-5部分:穩定性試驗.圖象顯示設備
|
(Evaluation and routine testing in medical imaging departments. Part 2-5 : constancy tests. Image display devices.)
|
NF C74-136-1994
|
醫療放射科的評定和常規檢驗.第2-6部分:穩定性試驗.計算機斷層攝影的X-射線設備
|
(Evaluation and routine testing medical imaging departments. Part 2-6 : constancy tests. X-ray equipment for computed tomography.)
|
NF C74-152-1997
|
醫療放射科的評定和常規檢驗.第3-2部分:乳房X-射線照相設備的成象性能和驗收試驗
|
(Evaluation and routine testing in medical imaging departments. Part 3-2 : acceptance tests imaging performance of mammographic X-ray equipment.)
|
NF C74-153-1997
|
醫療放射科的評定和常規檢驗.第3-3部分:驗收試驗.數字減法血管造影術(DSA)X-射線設備成像性能
|
(Evaluation and routine testing in medical imaging departments. Part 3-3 : acceptance tests. Imaging performance of X-ray equipment for digital subtraction angiography (DSA).)
|
NF C74-201-1999
|
醫療電氣設備.第2-1部分:1-50MeV范圍內電子加速器安全的特殊要求
|
(Medical electrical equipment - Part 2-1 : particular requirements for the safety of electron accelerator in the range of 1 Mev to 50 Mev.)
|
NF C74-205-2002
|
醫療電氣設備.在放射治療中使用的帶電離室的劑量計
|
(Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy.)
|
NF C74-208/A1-2001
|
醫療電氣設備.醫療電子加速器.功能特性
|
(Medical electrical equipment - Medical electron accelerators - Functional performance characteristics.)
|
NF C74-210-1996
|
醫療電氣設備.第2部分:遠程控制的自動驅動γ射線后裝設備安全的特殊要求
|
(Medical electrical equipment - Part 2 : particular requirements for the safety of remote-controlled automatically-driven gamma-ray after-loading equipment.)
|
NF C74-214-1995
|
醫療電氣設備.放射性核素調整器.描述性能的特殊方法
|
(Medical electrical equipment. Radionuclide calibrators. Particular methods for describing performance.)
|
NF C74-221-1994
|
醫療電氣設備.電光X射線圖象增強器的特性.第1部分:入口尺寸的測定
|
(Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 1 : determination of the entrance field size.)
|
NF C74-222-1994
|
醫療電氣設備.電光X射線圖象增強器的特性.第2部分:變換系數的測定
|
(Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 2 : determination of the conversion factor.)
|
NF C74-223-1994
|
醫療電氣設備. 電光X射線圖象增強器的特性.第3部分:亮度分配和亮度不均勻的測定(歐州標準61 262-3)
|
(Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 3 : determination of the luminance distribution and luminance non-uniformity.)
|
NF C74-224-1994
|
醫療電氣設備.電光X-射線圖象增強器的特性.第4部分:圖象失真的測定
|
(Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 4 : determination of the image distorsion.)
|
NF C74-226-1994
|
醫療電氣設備.電光X射線圖象增強器的特性.第6部分:對比率和雜光指數的測定
|
(Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 6 : determination of the contrast ratio and veiling glare index.)
|
NF C74-228-1-2002
|
X射線醫療診斷保護裝置.第1部分:材料衰減特性的測定
|
(Protective devices against diagnostic medical X-radiation - Part 1 : determination of attenuation properties of materials.)
|
NF C74-228-2-2002
|
X射線醫療診斷保護裝置.第2部分:防護玻璃板
|
(Protective devices against diagnostic medical X-radiation - Part 2 : protective glass plates.)
|
NF C74-308-1995
|
醫療電器設備.第2部分:具有內部功率源的外部心臟起搏器的特殊安全要求
|
(Medical electrical equipment. Part 2 : particular requirements for the safety of external cardiac pacemakers with internal power source.)
|
NF C74-318-1997
|
醫療電器設備.第2部分:內診鏡檢查設備安全性的特殊要求
|
(Medical electrical equipment. Part 2 : particular requirements for the safety of endoscopic equipment.)
|
NF C74-325-2003
|
醫療電氣設備.第2-41部分:外科和診斷照明設備的特殊安全要求
|
(Medical electrical equipment - Part 2-41 : particular requirements for the safety of surgical luminaires and luminaires for diagnosis.)
|
NF C74-341-1996
|
醫療電氣設備.第2部分:診斷和治療用激光設備安全性特殊要求
|
(Medical electrical equipment. Part 2 : particular requirements for the safety of diagnostic and therapeutic laser equipment.)
|
NF C74-372-1985
|
醫用電氣設備.微波醫療儀器.特殊安全規則
|
(Electromedical equipment. Microwave therapy equipment. Particular safety requirements.)
|
NF C74-502-1-1998
|
可植入的有源醫療器件.第1部分:由制造商提供的安全性,標識和信息的一般要求
|
(Active implantable medical devices. Part 1 : general requirements for safety, marking and information to be provided by the manufacturer.)
|
NF C91-011/A1-1999
|
工業、科學和醫療用射頻設備的無線電干擾特性測量方法與限值
|
(Industrial, scientific and medical (ISM) radio-frequency equipment - Radio disturbance characteristics - Limits and methods of measurement.)
|
NF C91-011/A2-2003
|
工業、科學和醫療(ISM)用射頻設備.無線電干擾特性.極限值和測量方法
|
(Industrial, scientific and medical (ISM) radio-frequency equipment - Radio disturbance characteristics - Limits and methods of measurement.)
|
NF C97-904-1994
|
醫療診斷超聲波設備的聲輸出申報的要求
|
(Requirements for the declaration of the acoustic output of medical diagnostic ultrasonic equipment.)
|
NF C97-907-1995
|
超聲領域.0.5MHz至15MHz范圍內的液體中醫療超聲設備超聲功率的測量和特點指南
|
(Ultrasonics fields. Guidance for the measurement and characterization of ultrasonic fields generate by medical ultrasonic equipment using hydrophones in the frequency range 0,5 MHz to 15 MHz.)
|
NF S64-021/A1-2003
|
醫療車輛及其設備.道路救護車
|
(Medical vehicles and their equipment - Road ambulances.)
|
NF S90-010-1987
|
外科醫療器械.可重復使用的全玻璃或金屬和玻璃醫療注射器.第1部分:尺寸
|
(Medico-surgical equipment. Reusable all-glass or metal-and-glass syringes for medical use. Part 1 : dimensions.)
|
NF S90-014-1981
|
外科醫療器械.可多次使用胰島素玻璃注射器
|
(Medical and surgical equipment. Re-useable glass insulin syringes.)
|
NF S90-033-1986
|
外科醫療器械.多次用橡膠避孕套
|
(MEDICO-SURGICAL EQUIPMENT. REUSABLE RUBBER CONTRACEPTIVE DIAPHRAGMS.)
|
NF S90-045-1985
|
外科醫療器械.制藥或配藥用鋁帽.驗收檢驗
|
(MEDICO-SURGICAL EQUIPMENT. ALUMINIUM CAPS FOR PHARMACEUTICAL USE. QUALITY ACCEPTANCE.)
|
NF S90-133-1989
|
外科醫療器械.外科手術用的輻射熱保溫箱.規范
|
(MEDICO-SURGICAL EQUIPMENT. RADIANT INCUBATORS. SPECIFICATIONS.)
|
NF S90-191-1986
|
外科醫療器械.輸液用玻璃瓶.幾何特性及標記
|
(MEDICO-SURGICAL EQUIPMENT. GLASS BOTTLES FOR PERFUSION. GEOMETRICAL CHARACTERISTICS AND MARKING.)
|
NF S90-201-1990
|
外科醫療器械.輸血必需
|
(Medico-surgical equipment. Transfusion sets.)
|
NF S90-202-1990
|
外科醫療器械.輸液必需
|
(Medico-surgical equipment . Infusion sets.)
|
NF S90-203-1986
|
外科醫療器械.輸血和輸液傳送、加長和其它附屬裝置
|
(MEDICO-SURGICAL EQUIPMENT. TRANSFER DEVICES,EXTENSION PIECES AND OTHER ANCILLARY EQUIPMENT FOR TRANSFUSION AND INFUSION.)
|
NF S90-221-1986
|
外科醫療器械.輸血器械.500ml玻璃瓶
|
(Medico-surgical equipment. Transfusion equipment. 500 ml glass bottles.)
|
NF S90-222-1986
|
外科醫療器械.輸血器械.250ml玻璃瓶
|
(Medico-surgical equipment. Transfusion equipment. 250 ml glass bottles.)
|
NF S90-230-1978
|
外科醫療器械.輸血器械.血及其制品用軟塑料簡式囊的尺寸和物理性能
|
(MEDICAL AND SURGICAL EQUIPMENT. TRANSFUSION APPARATUS FOR MEDICAL USE. PHYSICAL AND DIMENSIONAL PROPERTIES OF SIMPLE FLEXIBLE PLASTIC BAGS FOR BLOOD AND ITS DERIVATIVES.)
|
NF S90-231-1978
|
外科醫療器械.醫用輸血器械.血及其制品用軟塑料簡式囊的尺寸和物理特性
|
(MEDICAL AND SURGICAL EQUIPMENT. TRANSFUSION APPARATUS FOR MEDICAL USE. PHYSICAL AND DIMENSIONAL PROPERTIES OF MULTIPLE FLEXIBLE PLASTIC BAGS FOR BLOOD AND ITS DERIVATES.)
|
NF S90-240-1990
|
外科醫療器械.生物抽樣用一次性器皿.真空器皿
|
(Medico-surgical equipment. Single-use containers for biological samples. Evacuated tubes.)
|
NF S90-251-1986
|
外科醫療器械.推力注射器.功能特性
|
(MEDICO-SURGICAL EQUIPMENT. SYRINGE PUMPS. OPERATING CHARACTERISTICS.)
|
NF S90-304-1989
|
外科醫療器材.血液透析儀器.功能的特性
|
(MEDICO-SURGICAL EQUIPMENT. HAEMODIALYSIS EQUIPMENT. OPERATING DATA.)
|
NF S90-305-1986
|
外科醫療器械.活膜滲析分布監測器.功能特性
|
(MEDICO-SURGICAL EQUIPMENT. PERITONEAL DIALYSIS CYCLER. FUNCTIONAL APTITUDE.)
|
NF S90-307-1990
|
外科醫療器械.細胞和血漿離心分離器(監視器和一次性用品).工作性能
|
(MEDICO-SURGICAL EQUIPMENT. CENTRIFUGE-TYPE BLOOD CELL AND PLASMA SEPARATORS (MONITORS AND SINGLE-USE KITS) SUITABILITY FOR USE.)
|
NF S90-312-1984
|
外科醫療器械.醫院用病床
|
(BEDS FOR HOSPITAL USE.)
|
NF S90-316-1987
|
外科醫療器械.手術臺
|
(MEDICO-SURGICAL EQUIPMENT. OPERATING TABLES.)
|
NF S90-321-1986
|
外科醫療器械.蒸氣消毒用包、套、軟片和卷筒尺寸
|
(MEDICO-SURGICAL EQUIPMENT. BAGS,TUBE PACKINGS,SHEETS AND TOILS FOR STEAM-STERILIZATION. DIMENSIONS.)
|
NF S90-325-1989
|
外科醫療器械.蒸汽消毒器具
|
(MEDICAL SURGICAL EQUIPMENT. STEAM DISINFECTING EQUIPMENT.)
|
NF S90-351-2003
|
醫療保健設施.清潔室和相關受控環境.空氣中污物的控制要求
|
(Health care establishments - Cleanrooms and associated controlled environments - Requirements for the control of airbone contamination.)
|
NF S90-361-1990
|
外科醫療器械.釘子.股骨最高端用的不銹鋼片
|
(MEDICO-SURGICAL EQUIPMENT. ROUGH-SURFACED STAINLESS STEEL NAIL PLATES FOR THE UPPER END OF THE THIGHBONE. MATERIALS AND DIMENSIONS.)
|
NF S90-408-1981
|
外科醫療器械.外科植入物.氧化鋁陶瓷制品
|
(MEDICAL AND SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. CERAMIC MATERIALS BASED ON ALUMINA.)
|
NF S90-410-1988
|
外科醫療器械.外科植入物.接骨板.不對稱螺紋和可變底座(球形)板
|
(MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. GEOMETRY OF HOLES AND SLOTS CORRESPONDING TO SCREWS WITH ASYMMETRICAL THREAD AND SPHERICAL UNDER-SURFACES IN THE EQUIPMENT OF OSTEOSYNTHESIS.)
|
NF S90-411-1988
|
外科醫療器械.外科植入物.不對稱螺紋和球形底座的接骨用金屬螺釘.尺寸
|
(MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. OSTEOSYNTHESIS METAL SCREWS WITH ASYMMETRICAL THREAD AND SPHERICAL UNDER-SURFACE. DIMENSIONS.)
|
NF S90-414-1988
|
外科醫療器械.外科植入物.不對稱螺紋和球形底座接骨用不銹鋼螺絲.機械性能和試驗
|
(MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. STAINLESS STEEL OSTEOSYNTHESIS SCREW WITH ASYMMETRICAL THREAD AND SPHERICAL FITTING. MECHANICAL REQUIREMENTS AND TESTING.)
|
NF S90-420-1986
|
外科醫療器械.外科植入物.骨髓腔內插釘術系統.第1部分:首蓿葉式或V型剖面的骨髓腔內釘
|
(Medico-surgical equipment. Implants for surgery. Intramedullary nailing systems. Part 1 : intramedullary nails with cloverleaf or V-shaped cross-section.)
|
NF S90-426-1988
|
外科醫療器械.外科植入物.不銹鋼粗糙面骨干板.尺寸和表面特性
|
(MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. ROUGH SURFACE DIAPHYSIS PLATES MADE OF STAINLESS STEEL. DIMENSIONAL AND SURFACE CHARACTERISTICS.)
|
NF S90-427-1990
|
外科醫療器械.脊椎用接骨器材.不銹鋼制或鈷基合金制脊椎板.A系統.尺寸與幾何形狀
|
(MEDICO-SURGICAL EQUIPMENT. OSTEOSYNTHESIS EQUIPMENT FOR THE RACHIS. FORGED STAINLESS STELL OR COBALT ALLOY RACHIS PLATES. SYSTEM A. DIMENSIONS AND GEOMETRY.)
|
NF S90-433-1986
|
外科醫療器械.矯形外科設備.傳動連接.第2部分:十字形和一字形旋具
|
(Medico-surgical equipment. Orthopaedic instruments. Drive connections. Part 2 : screwdrivers for slotted, for cruciform and for recessed ned.)
|
NF S90-443-1989
|
外科醫療器械.外科植入物.嵌入胯骨中的人造大腿部件.嵌合物頂端部分和陽部分的規范
|
(MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. FEMORAL COMPONENTS OF HIP PROSTHESES WITH DETACHABLE HEAD. REQUIREMENTS FOR THE HEAD AND THE SPIGOT.)
|
NF S90-444-1987
|
外科醫療器械.外科植入物.局部和全部髖關節修復術.第2部分: 由金屬和塑料材料制成的關節面
|
(MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. PARTIAL AND TOTAL HIP JOINT PROSTHESES. PART 2 : BEARING SURFACES MADE OF METALLIC AND PLASTICS MATERIALS.)
|
NF S90-445-1985
|
外科醫療器械.骨科關節假體.基本規范
|
(MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. ORTHOPAEDIC JOINT PROSTHESES. BASIC REQUIREMENTS.)
|
NF S90-446-1985
|
外科醫療器械.膝關節全體和部分假肢.第1部分:分類、定義和尺寸名稱
|
(MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. PARTIAL AND TOTAL KNEE JOINT PROSTHESES. PART 1 : CLASSIFICATION,DEFINITIONS AND DESIGNATION OF DIMENSIONS.)
|
NF S90-449-1985
|
外科醫療器械.髖關節全部和部分假體.第1部分:分類和,尺寸的標識和要求
|
(MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. PARTIAL AND TOTAL HIP JOINT PROSTHESES. PART 1 : CLASSIFICATION,DESIGNATION OF DIMENSIONS AND REQUIREMENTS.)
|
NF S90-460-1982
|
外科醫療器械.止血鉗.尺寸和試驗
|
(MEDICAL AND SURGICAL EQUIPMENT. SURGICAL INSTRUMENTS. HAEMOSTATIC FORCEPS. DIMENSIONS AND TESTS.)
|
NF S90-461-1982
|
外科醫療器械.鉗、穿線管和持針器.尺寸和試驗
|
(MEDICAL AND SURGICAL EQUIPMENT. SURGICAL INSTRUMENTS. FORCEPS,NEEDLE-THREADERS AND NEEDLE-HOLDERS. DIMENSIONS AND TESTS.)
|
NF S90-462-1982
|
外科醫療器械.一般用途.手術刀、解剖鑷、重復使用的手術刀、導管
|
(MEDICAL AND SURGICAL EQUIPMENT. GENERAL PURPOSE SURGICAL INSTRUMENTS. KNIVES,DISSECTING TWEEZERS,RE-USEABLE BISTOURIES,PROBES.)
|
NF S90-463-1982
|
醫用外科設備.外科醫療器械.剪刀.尺寸和試驗
|
(MEDICAL AND SURGICAL EQUIPMENT. SURGICAL INSTRUMENTS. SCISSORS. DIMENSIONS AND TESTS.)
|
NF S90-480-1987
|
外科醫療器械.外科植入物.心血管植入物、心臟瓣膜
|
(MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. CARDIOVASCULAR IMPLANTS. CARDIAC VALVE PROSTHESES.)
|
NF S90-510-1973
|
外科醫療器械.矯形和假肢組件.肩軸和頸軸
|
(MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. SHOULDERED AND GROOVED PIN.)
|
NF S90-511-1973
|
外科醫療器械.矯形和假肢組件.帶凸耳的凸圓頭開槽全螺紋螺釘
|
(MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. JOINT SCREW WITH RAISED SLOTTED CHEESEHEAD. FULLY THREADED.)
|
NF S90-512-1973
|
外科醫療器械.矯形和假肢組件.帶凸耳的平圓頭開槽合螺紋螺釘
|
(MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. JOINT SCREW WITH FLAT SLOTTED CHEESEHEAD FULLY THREADED.)
|
NF S90-513-1973
|
外科醫療器械.矯形和假肢組件.帶安裝邊的凸圓頭半螺紋連接螺釘
|
(MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. JOINT SCREW WITH RAISED SLOTTED CHEESEHEAD AND FLANGE,PARTLY THREADED.)
|
NF S90-514-1973
|
外科醫療器械.矯形和假肢組件.凸耳凸圓頭鉚釘
|
(MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. SHOULDERED RIVET WITH RAISED CHEESE HEAD.)
|
NF S90-520-1973
|
外科醫療器械.矯形和假肢組件.帶連接掛鉤的可拆卸踝骨的連接
|
(MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. DETACHABLE ANKLE JOINT WITH ASSEMBLY HOOK.)
|
NF S90-521-1973
|
外科醫療器械.矯形和假肢組件.連接鉤
|
(MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. ASSEMBLY HOOK.)
|
NF S90-522-1973
|
外科醫療器械.矯形和假體組件.不可拆卸的單踝骨連接
|
(MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. FIXED ANKLE JOINT.)
|
NF S90-523-1973
|
外科醫療器械.矯形和假肢組件.不可拆卸的有套踝骨連接
|
(MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. FIXED ANKLE JOINT WITH FORK FITTING.)
|
NF S90-524-1973
|
外科醫療器械.矯形和假肢組件.無銷單膝的連接
|
(MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. KNEE JOINT WITHOUT BOLT.)
|
NF S90-525-1973
|
外科醫療器械.矯形和假肢組件.無銷、無滾珠軸承、有套膝骨的連接
|
(MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. KNEE JOINT WITH FORK FITTING,WITHOUT BALL-BEARINGS AND WITHOUT BOLT.)
|
NF S90-526-1973
|
外科醫療器械.矯形和假肢組件.帶滾珠軸承、無銷有套膝骨的連接
|
(MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. KNEE JOINT WITH FORK FITTING,BALL-BEARINGS AND WITHOUT BOLT.)
|
NF S90-527-1973
|
外科醫療器械.矯形和假肢組件.帶HOFFA銷釘單膝連接件
|
(MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. KNEE JOINT WITH HOFFA BOLT.)
|
NF S90-528-1973
|
外科醫療器械.矯形和假肢組件.帶HOFFA銷釘、無滾珠軸承、帶套膝的連接件
|
(MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. KNEE JOINT WITH FORK FITTING AND HOFFA BOLT,WITHOUT BALL-BEARINGS.)
|
NF S90-529-1973
|
外科醫療器械.矯形和假肢組件.無銷釘、無滾珠軸承、帶套臀部連接件
|
(MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. HIP JOINT WITH FORK FITTING,WITHOUT BALL-BEARINGS AND WITHOUT BOLT.)
|
NF S90-530-1973
|
外科醫療器械.矯形和假肢組件.HOFFA銷釘帶單臀部連接件
|
(MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. HIP JOINT WITH HOFFA BOLT.)
|
NF S90-531-1973
|
外科醫療器械.矯形和假肢組件.常HOFFA銷釘、無滾珠軸承:帶套臀部連接件
|
(MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. HIP JOINT WITH FORK FITTING AND HOFFA BOLT,WITHOUT BALL-BEARINGS.)
|
NF S90-532-1973
|
外科醫療器械.矯形和假肢組件.無銷釘帶滾珠有套臀部連接件
|
(MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. HIP JOINT WITH FORK FITTING AND BALL-BEARINGS,WITHOUT BOLT.)
|
NF S90-533-1973
|
外科醫療器械.矯形和假肢組件.帶套的HOFFA銷釘、無滾珠軸承有套臀部連接件
|
(MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. HIP JOINT WITH FORK FITTING,WITHOUT BALL-BEARINGS AND WITH FORKED HOFFA BOLT.)
|
NF S90-534-1973
|
外科醫療器械.矯形和假肢組件.單肘的連接件
|
(MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. ELBOW JOINT.)
|
NF S90-550-1986
|
外科醫療器械.外部乳房假體
|
(MEDICO-SURGICAL EQUIPMENT. EXTERNAL BREAST PROSTHESES.)
|
NF S91-160-1996
|
牙科學.牙科用醫療裝置.牙科植入物
|
(Dentistry. Medical devices for dentistry. Dental implants.)
|
NF S91-170-1996
|
牙科學.牙科用醫療裝置.儀器
|
(Dentistry. Medical devices for denstistry. Instruments.)
|
NF S91-200-1996
|
牙科學.牙科用醫療裝置.材料
|
(DENTISTRY. MEDICAL DEVICES FOR DENTISTRY. MATERIALS. (EUROPEAN STANDARD EN 1641).)
|
NF S91-224-1998
|
牙科工藝.用于牙科的醫療裝置的生物配伍性預診評估.牙科材料的試驗方法
|
(Dentistry. Preclinical evaluation of biocompatibility of medical devices used in dentistry. Test methods for dental materials.)
|
NF S91-300-1996
|
牙科學.牙科用醫療裝置.設備
|
(Dentistry. Medical devices for dentistry. Equipment.)
|
NF S92-019-1999
|
活體外醫療裝置.生物起源的樣品數量測量.參考測量過程展示(歐洲標準EN 12286)
|
(IN VITRO MEDICAL DEVICES. MEASUREMENTS OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN. PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES. (EUROPEAN STANDARD EN 12286).)
|
NF S92-019/A1-2000
|
活體外診斷醫療裝置.生物起源的樣品數量測量.參考測量過程展示
|
(In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Presentation of reference measurement procedures.)
|
NF S92-021-2004
|
體外診斷醫療裝置.生物試樣的定量測量.校準儀和控制材料賦值的計量溯源性
|
(In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials.)
|
NF S92-022-2004
|
體外診斷醫療裝置.生物樣品的定量測量.校準儀和控制材料所賦酶的催化濃度值的計量溯源性
|
(In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control m)
|
NF S92-024-2002
|
自測用體外診斷醫療裝置的一般要求
|
(General requirements for in vitro diagnostic medical devices for self-testing.)
|
NF S92-025-2002
|
在實驗室條件下診斷醫療裝置的性能評估
|
(Performance evaluation of in vitro diagnostic medical devices.)
|
NF S92-031-1996
|
體外診斷系統.體外診斷醫療裝置用EN 29001、EN 46001、EN 29002和EN 46002的應用指南
|
(In vitro diagnostic systems. Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for in vitro diagnostic medical devices.)
|
NF S92-033-2003
|
體外診斷醫療設備的驗收試驗用抽樣程序.統計方面
|
(Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects.)
|
NF S92-040-1999
|
活體外診斷醫療裝置.用生物染色的體外診斷試劑生產提供的信息
|
(IN VITRO DIAGNOSTIC MEDICAL DEVICES. INFORMATION SUPPLIED BY THE MANUFACTURER WITH IN VITRO DIAGNOSTIC REAGENTS FOR STAINING IN BIOLOGY. (EUROPEAN STANDARD EN 12376).)
|
NF S92-051-1999
|
實驗室診斷醫療裝置.微生物用培養基.培養基的性能標準
|
(In vitro diagnostic medical devices. Culture media for microbiology. Performance criteria for culture media.)
|
NF S92-051/A1-2002
|
實驗室診斷醫療裝置.微生物用培養基.培養基的性能標準
|
(In vitro diagnostic medical devices - Culture media for microbiology - Performance criteria for culture media.)
|
NF S93-004-1995
|
醫療器件制造用不銹鋼針頭管材
|
(STAINLESS STEEL NEEDLE TUBING FOR THE MANUFACTURE O FMEDICAL DEVICES. (EUROPEAN STANDARD EN ISO 9626).)
|
NF S93-004/A1-2001
|
醫療裝置生產用不銹鋼針管
|
(Stainless steel needle tubing for the manufacture of medical devices.)
|
NF S93-011-1993
|
注射管、注射針及其它醫療設備用的6%錐的錐形配件:第1部分:一般要求
|
(Conical fittings with a 6 per cent (luer) taper for syringes, needles and certain other medical equipment. Part 1 : general requirements.)
|
NF S93-012-1997
|
注射器,注射針頭和一定的其它醫療器械用A6%(路厄氏)錐度的錐形附件.鎖定附件
|
(Conical fittings with a 6 % (LUER) taper for syringes, needles and certain other medical equipment. Lock fittings.)
|
NF S94-090-2001
|
醫療外科設備.骨外科輔助定位裝置用材料.馬氏體不銹鋼、彌散硬化不銹鋼、奧氏體不銹鋼和奧氏鐵素體不銹鋼
|
(Medico-surgical equipment - Materials for ancillary positioning instruments for bone surgery - Martensitic, precipitation hardening, austenitic and austeno-ferritic stainless steels.)
|
NF S94-113-1996
|
外科植入物.骨銷和線.第1部分:材料和醫療設備
|
(Implants for surgery. Skeletal pins and wires. Part 1 : material and mechanical requirements.)
|
NF S94-472-2002
|
外科和牙醫用醫療器械.測定抗高壓鍋消毒、腐蝕和熱暴露的耐力
|
(Surgical and dental hand instruments - Determination of resistance against autoclaving, corrosion and thermal exposure.)
|
NF S95-151-2001
|
醫療抽吸設備.第1部分:電動抽吸設備.安全要求
|
(Medical suction equipment - Part 1 : electrically powered suction equipment - Safety requirements.)
|
NF S95-152-2001
|
醫療抽吸設備.第2部分:手動抽吸設備
|
(Medical suction equipment - Part 2 : manually powered suction equipment.)
|
NF S95-153-2001
|
醫療抽吸設備.第3部分:真空或壓力源驅動的抽吸設備
|
(Medical suction equipment - Part 3 : suction equipment powered from a vacuum or pressure source.)
|
NF S95-156-1997
|
醫療電氣設備.用于人的煙密度計.特殊要求
|
(Medical electrical equipment. Capnometers for use with humans. Particular requirements.)
|
NF S95-159-1997
|
與醫療麻醉劑一起使用的壓力調節器.第1部分:壓力調節器和帶流量測量裝置的壓力調節器(歐洲標準EN 738-1)
|
(PRESSURE REGULATORS FOR USE WITH MEDICAL GASES. PART 1 : PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW METERING DEVICES. (EUROPEAN STANDARD EN 738-1).)
|
NF S95-179/A1-2002
|
醫用氣體壓力調節器.第4部分:裝入醫療設備的低壓調節器
|
(Pressure regulators for use with medical gases - Part 4 : low-pressure regulators intended for incorporation into medical equipment.)
|
NF S95-202-2003
|
航空、水域和復雜地形用救護車.第1部分:連續救護患者用醫療器械接口要求
|
(Air, water and difficult terrain ambulances. Part 1 : medical device interface requirements for the continuity of patient care.)
|
NF S97-002-2001
|
一次性醫療手套.第2部分:物理性能的要求和檢驗方法
|
(Medical gloves for single use - Part 2 : requirements and testing for physical properties.)
|
NF S97-122-3-2003
|
非放射性醫療器械.主要傷口敷料試驗方法.第3部分:防水性
|
(Non-active medical devices - Test methods for primary wound dressings - Part 3 : waterproofness.)
|
NF S97-122-4-2003
|
非放射性醫療器械.主要傷口敷料試驗方法.第4部:合格性
|
(Non-active medical devices - Test methods for primary wound dressings - Part 4 : conformability.)
|
NF S97-122-6-2003
|
非放射性醫療器械.主要傷口敷料試驗方法.第6部分:氣味控制
|
(Non-active medical devices - Test methods for primary wound dressings - Part 6 : odour control.)
|
NF S97-165-1-2003
|
病人、醫務人員和醫療設備做為醫療用品使用的手術蓋單、長外衣、無污染套裝.制造商、加工者及產品的一般要
|
(Surgical drapes, growns and clean air suits, used as medical devices, for patients, clinical staff and equipment - Part 1 : general requirements for manufacturers, processors and products.)
|
NF S97-317/A1-2002
|
支承醫療設備的支架系統
|
(Rail systems for supporting medical equipment.)
|
NF S97-500-2003
|
醫療信息學.醫用分析儀與實驗室信息系統的接口.使用說明文件
|
(Health informatics - Clinical analyser interfaces to laboratory information systems - Use profiles.)
|
NF S97-530-2002
|
醫療信息學.有關輸血的信息.通訊和數據模型
|
(Medical informatics - Messages concerning blood transfusion - Communication and data model.)
|
NF S97-531-2002
|
醫療信息學.有關輸血的信息.指定的供血信息和指定的供血信息報告
|
(Medical informatics - Messages concerning blood transfusion - Nominative delivery message and report on nominative delivery message.)
|
NF S97-532-2002
|
醫療信息學.有關輸血的信息.易變血液產品供給信息
|
(Medical informatics - Messages concerning blood transfusion - Labile blood product delivery message.)
|
NF S97-543-1998
|
護理信息學.聯合國標準化信息.醫療設備的成本和使用
|
(HEALTHCARE INFORMATICS. UNITED NATIONS STANDARDIZED MESSAGE. COST AND IMPLEMENTATION OF MEDICAL RESSOURCES (MEDRUC).)
|
NF S97-601-1-2000
|
醫療設備制造用動物組織及其衍生物.第1部分:風險分析和管理
|
(Animal tissues and their derivatives utilized in the manufacture of medical devices - Part 1 : analysis and management of risk.)
|
NF S97-601-2-2000
|
醫療設備制造用動物組織及其衍生物.第2部分:資源控制、采集和輸送
|
(Animal tissues and their derivatives utilized in the manufacture of medical devices - Part 2 : controls on sourcing, collection and handling.)
|
NF S97-601-3-2000
|
醫療設備制造用動物組織及其衍生物.第3部分:病毒和其它傳染劑的清除和/或僵化的證實
|
(Animal tissues et their derivatives utilized in the manufacture of medical devices - Part 3 : validation of the elimination and/or inactivation of viruses and other transmissible agents.)
|
NF S98-051-1997
|
已消毒醫療設備用包裝材料和系統.第1部分:一般要求和試驗方法
|
(Packaging materials and systems for medical devices which are to be sterilized. Part 1 : general requirements and test methods.)
|
NF S98-051-2-1999
|
已消毒醫療設備用包裝材料和系統.第2部分:消毒的包裹物.要求和試驗方法
|
(PACKAGING MATERIALS AND SYSTEMS FOR MEDICAL DEVICES WHICH ARE TO BE STERILIZED. PART 2 : STERILIZATION WRAP. REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 868-2).)
|
NF S98-051-3-1999
|
要消毒的醫療設備用包裝材料和系統.第3部分:小袋和卷軸生產及紙袋生產用紙.要求和試驗方法
|
()
|
NF S98-051-4-1999
|
要消毒的醫療設備用包裝材料和系統.第4部分:要求和試驗方法
|
(PACKAGING MATERIALS AND SYSTEMS FOR MEDICAL DEVICES WHICH ARE TO BE STERILIZED. PART 4 : PAPER BAGS. REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 868-4).)
|
NF S98-051-5-1999
|
要消毒的醫療設備用包裝材料和系統.第5部分:加熱封閉和可自封閉的紙及塑料薄膜結構的袋和卷軸.要求和試驗方
|
(Packaging materials and systems for medical devices which are to be sterilized - Part 5 : heat and self-sealable pouches and reels of paper and plastic film construction - Requirements and test methods.)
|
NF S98-051-6-1999
|
要消毒的醫療設備用包裝材料和系統.第6部分:醫療上用環氧乙烷或輻照消毒用紙袋的生產用紙.要求和試驗方法.
|
(PACKAGING MATERIALS AND SYSTEMS FOR MEDICAL DEVICES WHICH ARE TO BE STERILIZED. PART 6 : PAPER FOR THE MANUFACTURE OF PACKS FOR MEDICAL USE FOR STERILIZATION BY ETHYLENE OXIDE OR IRRADIATION. REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 868-6).)
|
NF S98-051-7-1999
|
要消毒的醫療設備用包裝材料和系統.第7部分:醫療上用環氧乙烷或輻照消毒用熱封閉袋的生產用粘貼涂覆紙.要求
|
()
|
NF S98-051-8-1999
|
要消毒的醫療設備用包裝材料和系統.第8部分:與EN285一致的蒸氣消毒器用可再使用的消毒容器.要求和試驗方法
|
(Packaging materials and systems for medical devices which are to be sterilized. Part 8 : re-usable sterilization containers for steam sterilizers conforming to EN 285. Requirements and test methods.)
|
NF S98-059-2000
|
要消毒的醫療設備用包裝材料和系統.第9部分:加熱密封袋、卷軸和蓋用未涂覆非織造聚烯烴材料.要求和試驗方法
|
(Packaging materials and systems for medical devices which are to be sterilized - Part 9 : uncoated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lid)
|
NF S98-060-2000
|
要消毒的醫療設備用包裝材料和系統.第10部分:加熱密封袋、卷軸和蓋用膠粘涂覆非織造聚烯烴材料.要求和試驗
|
(Packaging materials and systems for medical devices which are to be sterilized - Part 10 : adhesive coated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels)
|
NF S98-100-2002
|
醫療保健產品的消毒.生物指示器.結果的選擇、使用和解釋的指南
|
(Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results.)
|
NF S98-101-1994
|
醫療器械的殺菌.環氧乙烷殺菌的確認和常規控制方法.要求
|
(STERILIZATION OF MEDICAL DEVICES. VALIDATION AND ROUTINE CONTROL OF ETHYLENE OXIDE STERILIZATION. (EUROPEAN STANDARD EN 550).)
|
NF S98-103-1994
|
醫療器械的殺菌.輻射殺菌的確認和常規控制方法.要求(EN 552)
|
(STERILIZATION OF MEDICAL DEVICES. VALIDATION AND ROUTINE CONTROL OF STERILIZATION BY IRRADIATION. (EUROPEAN STANDARD EN 552).)
|
NF S98-103/A2-2001
|
醫療裝置的消毒.通過輻射對消毒的常規控制和檢驗
|
(Sterilization of medical devices - Validation and routine control of sterilization by irradiation.)
|
NF S98-105-1994
|
醫療器械的殺菌.蒸汽殺菌的確認和常規控制方法
|
(STERILIZATION OF MEDICAL DEVICES. VALIDATION AND ROUTINE CONTROL OF STERILIZATION BY MOIST HEAT. (EUROPEAN STANDARD EN 554).)
|
NF S98-107-1-2002
|
醫療器械的消毒.對被標記“消毒“的醫療器械的要求.第1部分:對經終端消毒的醫療器械的要求
|
(Sterilization of medical devices - Requirements for medical devices to be designated STERILE - Part 1 : requirements for terminally sterilized medical devices.)
|
NF S98-109-2-1997
|
醫療器械的殺菌.微生物菌群制品的確認.第2部分:導則
|
(Sterilization of medical devices. Estimation of the population of micro-organisms on product. Part 2 : guidance.)
|
NF S98-110-3-1997
|
醫療器械的殺菌.微生物菌群制品的確認.第3部分:微生物技術批準方法導則
|
(Sterilization of medical devices. Estimation of the population of micro-organisms on product. Part 3 : guide to the methods for validation of microbiological techniques.)
|
NF S98-115-2001
|
保健產品的消毒.醫療設備消毒方法的制定、確認和常規控制及消毒劑特性的通用標準
|
(Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilizing process for medical device)
|
NF S98-118-2-2000
|
醫療設備的消毒.微生物法.第2部分:消毒過程鑒定所做的無菌實驗
|
(Sterilisation of medical devices - Microbiological methods - Part 2 : tests of sterility performed in the validation of a sterilization process.)
|
NF S99-003-1998
|
制造商提供的醫療裝置信息
|
(Information supplied by the manufacturer with medical devices.)
|
NF S99-004-1996
|
醫療裝置標簽中使用的圖形符號
|
(Graphical symbols for use in the labelling of medical devices.)
|
NF S99-004/A1-1999
|
醫療器械標簽用圖形符號
|
(Graphical symbols for use in the labelling of medical devices.)
|
NF S99-012-2000
|
命名法.規定數據交換用醫療設備命名系統規范
|
(Nomenclature - Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange.)
|
NF S99-101-2001
|
質量系統.醫療設備.EN ISO 9001應用的特殊要求
|
(Quality systems - Medical devices - Particular requirements for the application of EN ISO 9001.)
|
NF S99-102-1996
|
質量體系.醫療設備.EN ISO 9002使用的特殊要求(歐洲標準EN 46002)
|
(Quality systems. Medical devices. Particular requirements for the application of EN ISO 9002.)
|
NF S99-110-1995
|
非放射性醫療器械用EN 29001、EN 46001、EN 29002和EN 46002的應用導則
|
(Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for non-active medical devices.)
|
NF S99-172-2003
|
醫療設備的使用.與保健人員對醫療設備的使用相關的風險管理
|
(Use of medical devices - Risk management relative to the use of medical devices in health care establishments.)
|
NF S99-201-1-2003
|
人用醫療設備的臨床調查.第1部分:一般要求
|
(Clinical investigation of medical devices for human subjects - Part 1 : general requirements.)
|
NF S99-201-1993
|
人用醫療器械的臨床研究
|
(Clinical investigation of medical devices for human subjects.)
|
NF S99-201-2-2003
|
醫學受驗者用醫療器械的臨床調查.第2部分:臨床調查計劃
|
(Clinical investigation of medical devices for human subjects - Part 2 : Clinical investigation plans.)
|
NF S99-211-2001
|
醫療裝置.醫療裝置風險管理應用
|
(Medical devices - Application of risk management to medical devices.)
|
NF S99-301-1995
|
醫療設備.電報警信號
|
(Medical devices. Electrically generated alarm signals.)
|
NF S99-501-1998
|
生物學評估和醫療裝置.評估和試驗
|
(Biological evaluation of medical devices. Part 1 : evaluation and testing.)
|
NF S99-502-1998
|
醫療裝置的生物評定.第2部分:動物平安要求
|
(Biological evaluation of medical devices. Part 2 : animal welfare requirements.)
|
NF S99-503-1994
|
醫療裝置生物學評定.第503部分:遺傳毒性、致癌力和生殖毒性試驗
|
(Biological evaluation of medical devices. Part 3 : tests for genotoxicity, carcinogenicity and reproductive toxicity.)
|
NF S99-504-1994
|
醫療裝置生物學評定.第4部分:與血液相互作用試驗選擇
|
(Biological evaluation of medical devices. Part 4 : selection of tests for interactions with blood.)
|
NF S99-505-5-1999
|
醫療器械的生物評定.第5部分:細胞毒性試驗.玻璃試管法
|
(Biological evaluation of medical devices - Part 5 : tests for in vitro cytotoxicity.)
|
NF S99-506-1995
|
醫療裝置生物學評定.第6部分:植入后局部作用試驗
|
(Biological evaluation of medical devices. Part 6 : tests for local effects after implantation.)
|
NF S99-507-1996
|
醫療裝置生物學評定.第7部分:環氧乙烷消毒殘余物
|
(Biological evaluation of medical devices. Part 7 : ethylene oxide sterilization residuals.)
|
NF S99-508-2001
|
醫療器械的生物評定.第8部分:生物試驗用參考材料的選擇和合格證明
|
(Biological evaluation of medical devices - Part 8 : selection and qualification of reference materials for biological tests.)
|
NF S99-509-1999
|
醫療裝置的生物評定.第9部分:潛在降解產品鑒定和量化框架
|
(Biological evaluation of medical devices. Part 9 : framework for identification and quantification of potential degradation products.)
|
NF S99-510-2003
|
醫療器械的生物評定.第10部分:刺激與持續型過敏癥試驗
|
(Biological evaluation of medical devices - Part 10 : tests for irritation and delayed-type hypersensitivity.)
|
NF S99-511-1996
|
醫療裝置的生物評定.第11部分:系統毒性試驗
|
(Biological evaluation of medical devices. Part 11 : tests for systemic toxicity.)
|
NF S99-512-1997
|
醫療器械的生物評定.第12部分:樣品制備和參考材料
|
(Plastics. Phenolic resins. Definitions and test methods.)
|
NF S99-513-1999
|
醫療器械的生物評定.第13部分:聚合醫療器械中老化產品的識別與量化
|
(Biological evaluation of medical devices. Part 13 : identification and quantification of degradation products from polymeric medical devices.)
|
NF S99-514-2002
|
醫療器械的生物評定.第14部分:陶瓷降解產品的識別與合格鑒定
|
(Biological evaluation of medical devices - Part 14 : identification and quantification of degradation products from ceramics.)
|
NF S99-515-2001
|
醫療器械的生物評定.第15部分:對從金屬和合金中降解的產品的識別和合格檢驗
|
(Biological evaluation of medical devices - Part 15 : identification and quantification of degradation products from metals and alloys.)
|
NF S99-516-1997
|
醫療裝置的生物評定.第16部分:降解產品和可濾清物的毒理動力學研究設計方法
|
(Biological evaluation of medical devices. Part 16 : toxicokinetic study design for degradation products and leachables.)
|
NF S99-517-2003
|
醫療器械的生物評定.第17部分:可慮取物質容許限值的確定
|
(Biological evaluation of medical devices - Part 17 : establishment of allowable limits for leachable substances.)
|
NF T72-502-1997
|
化學消毒劑和防腐劑.醫療衛生時手消毒法.試驗方法和要求(第2階段/第2步)
|
(Chemical disinfectants and antiseptics. Hygienic handrub. Test method and requirements (phase2/step 2).)
|
NF X30-502-2003
|
醫療保健廢棄物的封裝.牙科汞齊廢棄物封裝.試驗和規范
|
(Packaging for medical care waste - Dental amalgam waste packaging - Tests and specifications.)
|
NF X30-510-2003
|
醫療保健廢棄物的術語
|
(Terminology of health care waste.)
|
NF Z15-601-1996
|
機讀卡.醫療保健應用.卡片:一般特征
|
(MACHINE READABLE CARDS. HEALTH CARE APPLICATIONS. CARDS : GENERAL CHARACTERISTICS. (EUROPEAN STANDARD EN 1387).)
|
NF Z84-839-2-2003
|
電信.電磁兼容性和無線電頻譜管理(ERM).超低功率活性醫療植入物和附件用頻率范圍402MHz-405MHz的無線電設備
|
()
|
編號 |
中文名稱 |
英文名稱 |