| 編號 | 中文名稱 | 英文名稱 |
|---|
| BS 2G 146-1966
| 飛行器用直流電動機規范
| Specification for d.c. motors for aircraft
|
| BS 2G 147-2-1966
| 飛機交流電動機規范.第2部分:三相可變頻率鼠籠式感應電動機
| Specification for a.c. motors for aircraft - Three-phase variable frequency squirrel-cage induction motors
|
| BS 4617-1983
| 液壓流體動力傳輸用動力泵和電動機性能的測定方法
| Methods for determining the performance of pumps and motors for hydraulic fluid power transmission
|
| BS 5000-11-1973
| 特種或?qū)Ｓ眯D(zhuǎn)電機.第11部分:小功率電動機和發電機
| Specification for rotating electrical machines of particular types or for particular applications - Small-power electric motors and generators
|
| BS 5000-50-1982
| 特種或?qū)Ｓ眯D(zhuǎn)電機.第50部分:燃油器電動機尺寸
| Specification for rotating electrical machines of particular types or for particular applications - Dimensions for oil burner motors
|
| BS 5655-10.1.1-1995
| 電梯與服務電梯.第10部分:試驗和檢驗規范.第1節:電動機.第1小節:新升降機交付使用試驗
| Lifts and service lifts - Specification for the testing and examination of lifts and service lifts - Electric lifts - Commissioning tests for new lifts
|
| BS 5944-2-1992
| 液壓動力系統和部件氣動噪聲測量.第2部分:電動機試驗方法
| Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for motors
|
| BS 7250-1989
| 液壓傳動正排量泵和電動機導出量的測定方法
| Methods of determining the derived capacity of hydraulic fluid power positive displacement pumps and motors
|
| BS 7275-3-1995
| 液壓流體動力馬達特性的測定.第3部分:恒定流和恒定扭矩法
| Determination of hydraulic fluid power motor characteristics - Method at constant flow and at constant torque
|
| BS 787-1-1969
| 礦用式防爆電纜終端箱規范.第1部分:(650V以下三相交流電路用)電動機 直接起動用電纜終端箱
| Specification for mining type flameproof gate-end boxes - Gate-end boxes for direct-on-line motor starting (for use on 3-phase a.c. circuits up to 650 V)
|
| BS AU 233-1989
| 乘用車起動電動機電氣連接件規范
| Specification for starter motor electrical connections for passenger cars
|
| BS AU 234-1989
| 道路車輛起動電動機一般要求試驗方法
| Methods of test and general requirements for road vehicle starter motors
|
| BS AU 252-1993
| 道路車輛用經節起動器電動機小齒輪規范
| Specification for diametral pitch starter motor pinions for road vehicles
|
| BS DD IEC TS 60034-20-1-2002
| 旋轉電機.控制電動機.步進電動機
| Rotating electrical machines - Control motors - Stepping motors
|
| BS DD IEC TS 60034-26-2002
| 旋轉電機.非平衡電壓對三相感應電動機性能的影響
| Rotating electrical machines - Effects of unbalanced voltages on the performance of three-phase induction motors
|
| BS EN 1060-3-1997
| 日常攜帶的血壓計.電動機械血壓測量系統的補充要求
| Non-invasive sphygmomanometers - Supplementary requirements for electro-mechanical blood pressure measuring systems
|
| BS EN 137000-1996
| 電子元器件質量評定協調體系.通用規范:電動機用于因式交流電容器和非定式電容器
| Harmonized system of quality assessment for electronic components - Generic specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors
|
| BS EN 137100-1996
| 電子元器件質量評定協調體系.分規范..電動機起動器非固體電解質電解鋁交流固定電容器.合格鑒定批準
| Harmonized system of quality assessment for electronic components - Sectional specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval
|
| BS EN 137101-1996
| 電子元器件質量評定協調體系.空白詳細規范.發電動機起動器鋁交流電解質固定電容器.合格鑒定批準
| Harmonized system of quality assessment for electronic components - Blank detail specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications (Qualification approval)
|
| BS EN 29775-1993
| 小船.15KW-40KW功率單外舷電動機遠程操縱系統
| Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power
|
| BS EN 50347-2001
| 標準尺寸和輸出的通用三相感應電動機.框號56-315,法蘭號65-740
| General purpose three-phase induction motors having standard dimensions and outputs - Frame numbers 56 to 315 and flange numbers 65 to 740
|
| BS EN 60034-12-2002
| 旋轉電機.單速三相籠型感應電動機的起動性能
| Rotating electrical machines - Starting performance of single-speed three-phase cage induction motors
|
| BS EN 60252-1-2002
| 交流電動機的電容器.總則.性能、試驗和額定值.安全要求.安裝和操作指南
| A.C. motor capacitors - General - Performance, testing and rating - Safety requirements - Guide for installation and operation
|
| BS EN 60252-2-2003
| 交流電動機電容器.電動機起動電容器
| A.C. motor capacitors - Motor start capacitors
|
| BS EN 60335-2-34-2003
| 家用和類似用途電器的安全規范.特殊要求.電動機-壓縮機組的特殊要求
| Specification for safety of household and similar electrical appliances - Particular requirements for motor-compressors
|
| BS EN 60349-1-2000
| 鐵路用途.鐵路與公路車輛用旋轉電機.用于除電子變換器饋電交流電動機之外的機器
| Railway applications - Rotating electrical machines for rail and road vehicles - Machines other than electronic convertor-fed alternating current motors
|
| BS EN 60349-2-2001
| 鐵路設施.鐵路和公路車輛用旋轉電機.電子變流器饋電交流電動機
| Railway applications - Rotating electrical machines for rail and road vehicles - Electronic convertor-fed alternating current motors
|
| BS EN 60470-2001
| 高壓交流接觸器和基于接觸器的電動機起動器
| High-voltage alternating current contactors and contactor-based motor starters
|
| BS EN 60644-1980
| 電動機電路用高壓熔斷體規范
| Specification for high voltage fuse-links for motor circuit applications
|
| BS EN 60730-2-2-2002
| 家用或類似用途的自動電控制器規范.特殊要求.電動機熱保護器的特殊要求
| Specification for automatic electrical controls for household and similar use - Particular requirements - Particular requirements for thermal motor protectors
|
| BS EN 60730-2-4-1993
| 家用和類似用途自動電氣控制裝置規范.特殊要求.密封和半密封型電動機壓縮機組的電動機熱保護器
| Specification for automatic electrical controls for household and similar use - Particular requirements - Thermal motor protectors for motor-compressors of hermetic and semi-hermetic type - Section 4: Thermal motor protectors for motor-compressors of hermetic and semi-hermetic type
|
| BS EN 60947-4-1-2001
| 低壓開關設備和控制設備規范.連接器和起動器.電動機械連接器和起動器
| Specification for low-voltage switchgear and controlgear - Contactors and motor-starters - Electromechanical contactors and motor-starters
|
| BS EN 60947-4-2-2000
| 低壓開關設備和控制設備規范.接觸器和電動機起動機.交流半導體電動機控制器和起動器
| Specification for low-voltage switchgear and controlgear - Contactors and motor-starters - A.C. semiconductor motor controllers and starters
|
| BS EN 60947-4-3-2000
| 低壓開關設備和控制設備規范.接觸器和電動機起動器.非電動機負載用交流半導體控制器和接觸器
| Specification for low-voltage switchgear and controlgear - Contactors and motor-starters - Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads - AC semiconductor controllers and contactors for non-motor loads
|
| BS EN 61136-1-1998
| 半導體電源變換器.調速電驅動系統.一般要求.直流電動機驅動額定值規范
| Semiconductor power convertors - Adjustable speed electric drive systems - General requirements - Rating specifications, particularly for d.c. motor drives
|
| BS EN 61377-2-2003
| 鐵路設施.機車車輛.聯合試驗.斷路直流牽引電動機及其控制設備
| Railway applications - Rolling stock - Combined testing - Chopper-fed direct current traction motors and their control
|
| BS EN 61377-3-2003
| 鐵路設施.鐵路車輛.由間接變流器饋電的交流電動機及其控制系統的聯合檢驗
| Railway applications - Rolling stock - Combined testing of alternating current motors, fed by an indirect convertor, and their control system
|
| BS EN ISO 11498-1997
| 牙鉆手柄.牙科用低壓電動機
| Dental handpieces - Dental low-voltage electric motors
|
| BS EN ISO 4126-4-2004
| 過壓保護安全設備.由伺服電動機控制的安全閥
| Safety devices for protection against excessive pressure - Pilot operated safety valves
|
| BS EN ISO 5163-2005
| 石油產品.發動機和航空燃料爆震特性的測定.馬達法
| Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method
|
| BS EN ISO 6185-2-2001
| 充氣艇.電動機最大額定功率為4.5KW至15KW的小艇
| Inflatable boats - Boats with a maximum motor power rating of 4.5 kW to 15 kW inclusive
|
| BS EN ISO 6185-3-2001
| 充氣艇.最大電動機功率為15KW及其以上的小氣艇
| Inflatable boats - Boats with maximum motor power rating of 15 kW and greater
|
| BS IEC 60092-301-2002
| 船上電氣裝置.設備.發電機和電動機
| Electrical installation in ships - Equipment - Generators and motors
|
| BS ISO 10767-3-2000
| 液壓傳動.系統和元件產生壓力波動值的測定.馬達用方法
| Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Method for motors
|
| BS ISO 12333-2000
| 航空航天.定量液壓馬達.35000KPa系統的一般規范
| Aerospace - Constant displacement hydraulic motors - General specifications for 35000 kPa systems
|
| BS ISO 14617-11-2004
| 圖示的圖形符號.熱轉換和熱電動機設備
| Graphical symbols for diagrams - Devices for heat transfer and heat engines
|
| BS ISO 3019-1-2001
| 液力傳動.容積式泵和馬達的安裝法蘭盤和軸伸的尺寸及標識代碼.以米制單位表示的英制系列
| Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Inch series shown in metric units
|
| BS ISO 3019-2-2001
| 液力傳動.容積式泵和馬達的安裝法蘭盤和軸伸的尺寸及標識代碼.米制系列
| Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Metric series
|
| BS ISO 4392-1-2002
| 液壓流體動力.電動機特性的測定.在恒低速和常壓下
| Hydraulic fluid power - Determination of characteristics of motors - At constant low speed and constant pressure
|
| BS ISO 4392-2-2002
| 液壓流體動力.電動機特性的測定.穩定性
| Hydraulic fluid power - Determination of characteristics of motors - Startability
|
| 編號 | 中文名稱 | 英文名稱 |
|---|