| 編號 | 中文名稱 | 英文名稱 |
|---|
| NF C47-732-2002
| 家用和類似用途的自動電控制設備.第2-2部分:電動機熱保護器的特殊要求
| (Automatic electrical controls for household and similar use - Part 2-2 : particular requirements for thermal motor protectors.)
|
| NF C47-734-1993
| 家用和類似用途的自動電控制設備.第2部分:密封和半密封式電動壓縮機熱電動機保護裝置的特殊要求
| (Automatic electrical controls for househod and similar use. Part 2 : particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type.)
|
| NF C47-734/A2-2003
| 家用和類似用途的自動電控制器.第2-4部分:密封和半密封電動壓縮機組的電動機熱保護器的特殊要求
| (Automatic electrical controls for household and similar use - Part 2-4 : particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type.)
|
| NF C47-740/A2-2003
| 家用和類似用途的自動電控制器.第2-10部分:電動機起動繼電器的特殊要求
| (Automatic electrical controls for household and similar use - Part 2-10 : particular requirements for motor starting relays.)
|
| NF C51-120-1965
| 一般用低功率和中功率三相異步電動機.安裝尺寸.聯軸器.內部連接
| (LOW AND MEDIUM OUTPUT THREE-PHASE ASYNCHRONOUS MOTORS FOR GENERAL USE. ANCHORING DIMENSIONS,CONNECTIONS,INTERNAL CONNECTIONS.)
|
| NF C51-147-2001
| 帶有標準尺寸和輸出量的通用三相感應電動機.幀數為56至315、法蘭數為65至740
| (General purpose three-phase induction motors having standard dimensions and outputs - Frame numbers 56 to 315 and flange numbers 65 to 740.)
|
| NF C51-150-1965
| 三相感應電動機.“全封閉”型.短路轉子.E類
| (Totally-enclosed three-phase induction motors with short-cicuited rotors. Class E.)
|
| NF C51-155-1969
| 全封閉式線繞轉子四極三相.感應電動機.E類
| (Totally-enclosed wound-rotor four-pole three-phase. Induction motors. Class E.)
|
| NF C51-160-1965
| 三相感應電動機.防護型.短路轉子
| (Protected three-phase induction motors with short-circuited rotors.)
|
| NF C51-165-1965
| 三相感應電動機.防護型.繞組轉子.E類
| (Protected wound-rotor three-phase induction motors. Class E .)
|
| NF C51-312-2003
| 旋轉電機.第12部分:單速三相籠型感應電動機的起動性能
| (Rotating electrical machines - Part 12 : starting performance of single-speed three-phase cage induction motors.)
|
| NF C53-231-2002
| 半導體電力變換器.可調速電驅動裝置.一般要求.第1部分:直流電動機的額定值規范
| (Semiconductor power convectors - Adjustable speed electric drive systems - General requirements - Part 1 : rating specifications, particularly for D.C. motor drives.)
|
| NF C54-150-1-2002
| 交流電動機的電容器.第1部分:總則.性能、試驗和考核.安全要求.安裝和操作指南
| (AC motor capacitors - Part 1 : general - Performance, testing and rating - Safety requirements - Guide for installation and operation.)
|
| NF C54-150-2-2003
| 交流電動機用電容器.第2部分:電動機起動電容器
| (A.C. motor capacitors - Part 2 : motor start capacitors.)
|
| NF C63-110-2001
| 低壓開關設備和控制設備.第4-1部分:接觸器和電動機起動器.機電接觸器和電動機起動器
| (Low-voltage switchgear and controlgear - Part 4-1 : contactors and motor-starters - Electromechanical contactors and motor-starters.)
|
| NF C63-110/A1-2003
| 低壓開關設備和控制設備.第4-1部分:接觸器和電動機起動器.機電式接觸器和電動機起動器
| (Low-voltage switchgear and controlgear - Part 4-1 : contactors and motor-starters - Electromechanical contactors and motor-starters.)
|
| NF C63-112-2000
| 低壓開關設備和控制設備.第4-2部分:接觸器和電動機起動器.交流半導體電動機控制器和起動器
| (Low-voltage switchgear and controlgear - Part 4-2 : contactors and motor-starters - A.C. semiconductor motor controllers and starters.)
|
| NF C63-112/A1-2002
| 低壓開關設備和控制設備.第4-2部分:接觸器和電動機啟動器.交流電流半導體控制器和啟動器
| (Low-voltage switchgear and controlgear - Part 4-2 : contactors and motor-starters - AC semiconductor motor controllers and starters.)
|
| NF C63-113-2000
| 低壓開關設備和控制設備.第4-3部分:接觸器和電動機起動器.非電動機負載用交流半導體控制器和接觸器
| (Low-voltage switchgear and controlgear - Part 4-3 : contactors and motor-starters - A.C. semiconductor controllers and contactors for non-motor loads.)
|
| NF C63-146-1998
| 低壓開關設備和控制設備.第5-1部分:控制線路裝置和接轉元件.電動機械控制線路裝置
| (Low-voltage switchgear and controlgear - Part 5-1 : control circuit devices and switching elements - Electromechanical control circuit devices.)
|
| NF C63-650-1982
| 低壓開關設備和控制設備.低壓電動機起動器
| (Low-voltage switchgear and controlgear. Low-voltage motor starters.)
|
| NF C64-151-1985
| 交流高壓開關設備和控制設備.高壓電動機起動器.第1部分:直接交流起動器(全電壓)
| (A.C. high-voltage switchgear and controlgear. High-voltage motor starters. Part 1 : direct-on-line (full voltage) A.C. starters.)
|
| NF C64-170-2001
| 高壓交流接觸器和基于接觸器的電動機起動器
| (High-voltage alternating current contactors and contactor-based motor starters.)
|
| NF C64-204-1993
| 電動機用高電壓熔絲規范
| (Specification for high-voltage fuse-links for motor circuit applications.)
|
| NF E48-353-2002
| 液力傳動.活塞泵和電動機的安裝法蘭盤和軸端用尺寸及識別碼.第2部分:米制系列
| (Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2 : metric series.)
|
| NF E48-381-2002
| 液壓傳動.馬達特性的測定.第1部分:在恒低速和恒壓力下的測定
| (Hydraulic fluid power - Determination of characteristics of motors - Part 1 : at constant low speed and constant pressure.)
|
| NF E48-382-2002
| 液壓傳動.馬達特性的測定.第2部分:起動性
| (Hydraulic fluid power - Determination of characteristics of motors - Part 2 : startability.)
|
| NF E48-387-1992
| 氣壓液力傳動.氣載噪聲級測定試驗規程.第2部分:電動機
| (HYDRAULIC FLUID POWER. TEST CODE FOR DETERMINATION OF AIRBONE NOISE LEVELS. PART 2 : MOTORS.)
|
| NF E48-393-2001
| 液力傳動.系統和元件中產生的壓力波動等級的測定.第3部分:電動機法
| (Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 3 : method for motors.)
|
| NF F65-349-1-2000
| 電氣牽引.鐵路和道路車輛用旋轉電機.第1部分:非電子交換回饋交變電流馬達機
| (Electrical traction - Rotating electrical machines for rail and road vehicules - Part 1 : machines other than electronic convertor-fed alternating current motors.)
|
| NF F65-349-1/A1-2003
| 電力牽引.鐵路與道路車輛用旋轉電機.第1部分:除電子變流器供電的交流電動機之外的旋轉電機
| (Electric traction - Rotating electrical machines for rail and road vehicles - Part 1 : machines other than electronic convertor-fed alternating current motors.)
|
| NF F65-377-1999
| 電力牽引.鐵路車輛.反向供電交流電動機及其控制的聯合檢驗
| (Electric traction - Rolling stock - Combined testing of inverter-fed alternating current motors and their control.)
|
| NF F65-377-2-2003
| 鐵路設施.機車車輛.聯合試驗.第2部分:斬波直流牽引電動機及其控制設備
| (Railway applications - Rolling stock - Combined testing - Part 2 : chopper-fed direct current traction motors and their control.)
|
| NF F65-377-3-2003
| 鐵路設施.機車車輛.第3部分:間接變流器供電的交流電動機及其他控制系統的組合檢驗
| (Railway applications - Rolling stock - Part 3 : combined testing of alternating current motors, fed by an indirect convertor, and their control system.)
|
| NF J37-825-1-2002
| 充氣船.第1部分:最大電動機功率為4.5KW的船
| (Inflatable boats - Part 1 : boats with a maximum motor power rating of 4,5 kW.)
|
| NF J37-825-2-2002
| 充氣船.第2部分:最大電動機功率為4.5KW至15KW的船
| (Inflatable boats - Part 2 : boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive.)
|
| NF J37-825-3-2002
| 充氣船.第3部分:最大電動機功率為15KW以上的船
| (Inflatable boats - Part 3 : boats with a maximum power rating of 15 kW and greater.)
|
| NF L45-201-1991
| 航空和航天.恒排量液壓馬達.總規范
| (Aerospace. Constant displacement hydraulic motors. General specifications.)
|
| NF L51-710-1966
| 飛行器用電動機.安裝和驅動
| (ELECTRIC MOTORS FOR AIRCRAFT. FIXING AND DRIVE.)
|
| NF L70-010-1980
| 機載機械儀表和電動機械儀表.一般特性
| (Aircraft. Mechanical and electromechanical indicators. General requirements.)
|
| NF L70-520-1971
| 二相電動機
| (TWO PHASE SERVOMOTORS.)
|
| NF R11-415-1997
| 道路車輛.電動機起動器的電性能.試驗方法和一般要求
| (Road vehicles. Electrical performance of starter motors. Test methods and general requirements.)
|
| NF S31-006-1-1992
| 聲學.測量旋轉式電動機械發出的天線噪音的試驗規程.第1部分:在反射平面上自由場條件的鑒定方法
| (ACOUSTICS. TEST CODE FOR THE MEASUREMENT OF AIRBONE NOISE EMITTED BY ROTATING ELECTRICAL MACHINERY. PART 1 : ENGINEERING METHOD FOR FREE-FIELD CONDITIONS OVER A REFLECTING PLANE. (EUROPEAN STANDARD EN 21680-1).)
|
| NF S31-006-2-1992
| 聲學.測量旋轉式電動機械發出的天線噪音的試驗規程.第2部分:檢驗方法
| (ACOUSTICS. TEST CODE FOR THE MEASUREMENT OF AIRBONE NOISE EMITTED BY ROTATING ELECTRICAL MACHINERY. PART 2 : SURVEY METHOD. (EUROPEAN STANDARD EN 21680-2).)
|
| NF S91-124-1999
| 牙鉆手柄.牙科用低壓電動機
| (DENTAL HANDPIECES. DENTAL LOW-VOLTAGE ELECTRICAL MOTORS. (EUROPEAN STANDARD EN ISO 11498).)
|
| NF X50-001-2-5-2002
| 發電站設備采購指南.第2-5部分:電氣設備.馬達
| (Guide for procurement of power station equipment - Part 2-5 : electrical equipment - Motors.)
|
| 編號 | 中文名稱 | 英文名稱 |
|---|