| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 1133 Secs.1 to 3-1989 | 包裝規程.第1-3節:包裝概括介紹 | Packaging code - Introduction to packaging |
| BS 1133-10.1-1990 | 包裝規程.第10節:金屬容器.第1小節:馬口鐵制聽桶和罐 | Packaging code - Metal containers - Tins and cans |
| BS 1133-10.2-1991 | 包裝規程.第10節:金屬容器.第2小節:鐵桶 | Packaging code - Metal containers - Metal drums |
| BS 1133-15-1991 | 包裝規程.第15節:伸縮性捆綁帶 | Packaging code - Tensional strapping |
| BS 1133-18-1991 | 包裝規程.第18節:玻璃包裝 | Packaging code - Packaging in glass |
| BS 1133-19-1986 | 包裝規程.包裝中使用的干燥劑 | Packaging code - Use of desiccants in packaging |
| BS 1133-1986 | 包裝法規.第19節:包裝中干燥劑的使用 | Packaging code. Use of desiccants in packaging |
| BS 1133-21-1991 | 包裝規程.第21節:再生纖維素薄膜,塑料薄膜,鋁箔,撓性多層板和金屬化材料 | Packaging code - Regenerated cellulose film, films made of plastics, aluminium foil, flexible multilayer structures and metallized materials |
| BS 1133-22-1989 | 包裝規程.第22節:塑料容器包裝 | Packaging code - Packaging in plastics containers |
| BS 1133-7.6-1988 | 包裝規程.第7節:紙和紙板包裝物、袋和包裝箱.第6小節:模壓紙漿包裝 | Packaging code - Paper and board wrappers, bags and containers - Moulded pulp packaging |
| BS 1133-8-1991 | 包裝規程.第8節:木箱、木盒和木板條箱 | Packaging code - Wooden boxes, cases and crates |
| BS 1262-2002 | 金屬包裝.有表面涂料用帶圓拉環的金屬容器.規范 | Metal packaging - Round lever-lid metal containers for surface coatings - Specification |
| BS 1489-1972 | 電工用包覆繞組線的包裝規范 | Specification for the packaging of covered winding wires for electrical purposes |
| BS 1683-1987 | 已加工乳酪包裝用鋁箔規范 | Specification for coated aluminium foil for wrapping processed cheese |
| BS 2548-1986 | 一般包裝用刨花規范 | Specification for wood wool for general packaging purposes |
| BS 2782-6 Method 643A-1976 | 塑料的試驗方法.第6部分:尺寸特性.試驗方法643A:收縮包裝用薄膜熱縮變 | Methods of testing plastics - Dimensional properties - Shrinkage on heating of film intended for shrink wrapping applications |
| BS 2837-1988 | 包裝箱提升裝置用鋼鉸鏈與鏈帶組件規范 | Specification for steel links and strap assemblies for lifting attachments for packing cases |
| BS 2982-1992 | 帶可卸刀片的外科解剖刀的材料和包裝規范 | Specification for materials and packaging of surgical scalpels with detachable blades |
| BS 3130-1-1989 | 包裝術語.總則(包括輔助材料) | Glossary of packaging terms - General (including auxiliary materials) |
| BS 3130-2-1990 | 包裝術語.第2部分:紙與紙板包裝 | Glossary of packaging terms - Paper and board packaging |
| BS 3130-5-1994 | 包裝術語.第5部分:塑料和軟包裝(不包括紙包裝) | Glossary of packaging terms - Plastics and flexible packaging (excluding paper) |
| BS 3130-6-1981 | 包裝術語.第6部分:木包裝 | Glossary of packaging terms - Wooden packaging |
| BS 3177-1959 | 包裝用柔性薄片材料的水蒸汽滲透性的測定方法 | Method for determining the permeability to water vapour of flexible sheet materials used for packaging |
| BS 3755-1964 | 食品包裝材料氣味評定的試驗方法 | Methods of test for the assessment of odour from packaging materials used for foodstuffs |
| BS 3895-1976 | 放射性物質安全運輸包裝的設計、試驗及使用指南 | Guide to the design, testing and use of packaging for the safe transport of radioactive materials |
| BS 3F 69-1979 | 硫化橡膠產品包裝和識別標志規范 | Specification for packaging and identification of vulcanized rubber items |
| BS 4361-15-1988 | 木工機械.第15部分:單板包裝邊緣剪切機規范 | Woodworking machines - Specification for veneer pack edge shears |
| BS 4672-1-1971 | 包裝件運輸和儲存危害指南.第1部分:氣候性危害 | Guide to hazards in the transport and storage of packages - Climatic hazards |
| BS 4672-2-1971 | 包裝件運輸和儲存危害指南.第2部分:氣候性危害(地圖與圖表) | Guide to hazards in the transport and storage of packages - Climatic hazards (maps and diagrams) |
| BS 4879-1973 | 冰淇淋與冷凍糖果包裝用上臘紙板規范 | Specification for waxed board for packaging ice cream and frozen confectionery |
| BS 5167-1978 | 洗衣粉和清潔劑包裝.纖維板盒及筒尺寸和容積 | Packages for washing and cleaning powders - Dimensions and volumes of cartons and drums from fibreboard |
| BS 5771-1981 | 預裝食品的包裝規范.玻璃和金屬容器的容量 | Specification for packages for certain pre-packed foodstuffs: capacities of glass and metal containers |
| BS 5N 100-7-2002 | 飛行器氧氣系統和設備.標簽與包裝品的清潔處理指南 | Aircraft oxygen systems and equipment - Guide to cleaning labelling and packaging |
| BS 6455-1984 | 撓性包裝材料溶劑殘留成分監測方法 | Method for monitoring the levels of residual solvents in flexible packaging materials |
| BS 6720-1986 | 發行包裝用運輸標志規范 | Specification for marking transit information on packages for distribution |
| BS 6788-2-1990 | 神經外科植入物.第2部分:可植入式神經刺激器的標志和包裝規范 | Neurosurgical implants - Specification for marking and packaging of implantable neural stimulators |
| BS 6837-1987 | 與1200mmｘ1000mm、1200mmｘ800mm托盤和成組載荷模數有關的剛性長方形運輸包裝的平面尺寸規范 | Specification for plan dimensions of rigid rectangular transport packages with a modular relationship to 1200 mm x 1000 mm and 1200 mm x 800 mm pallets and unit loads |
| BS 6988-1989 | 用于盤碟包裝材料的熱壓帶粘合力的測定方法 | Method for determination of the adhesion of autoclave tape to tray wrap material |
| BS 7539-1992 | 包裝設計用減震材料性能測定試驗方法 | Methods for test for determination of properties of cushioning materials for package design purposes |
| BS 7948-1-1997 | 包裝橡膠包用薄膜.不可剝拆的高熔點薄膜 | Films for wrapping rubber bales - Non-strippable high melting point films |
| BS 8404-2001 | 包裝.防止兒童打開的包裝.藥品用不可再封裝包裝的要求和檢驗程序 | Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for pharmaceutical products |
| BS 984-1990 | 編織與地毯用紗零售包裝凈重的測定方法 | Method for determination of net mass of retail packages of knitting and rug yarns |
| BS DD 264-2007 | 包裝.醫學產品用盲文和其他型式 | Packaging - Braille and other formats for medicinal products |
| BS DD CEN/TS 14014-2006 | 郵政服務.混合郵件.用戶－業務員文件形式定義.自動郵政處理的信件包裝的XML定義 | Postal services - Hybrid mail - XML definition of encapsulation of letters for automated postal handling |
| BS DD CEN/TS 14631-2005 | 郵政服務.容器和包裝物的自動識別.容器的資產編號 | Postal services - Automatic identification of receptacles and containers - Receptacle asset numbering |
| BS EN 10333-2005 | 包裝用鋼.與人和動物消費用食品、產品或飲料接觸的扁鋼制品.鍍錫鋼(馬口鐵) | Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Tin coated steel (tinplate) |
| BS EN 10334-2005 | 包裝用鋼.與人和動物消費用食品、產品或飲料接觸的扁平鋼制品.非鍍層鋼(黑鋼板) | Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non-coated steel (blackplate) |
| BS EN 10335-2005 | 包裝用鋼.與人和動物消費用食品、產品或飲料接觸的扁平鋼制品.非合金電解鉻/氧化鉻鍍鋼 | Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel |
| BS EN 1086-1996 | 食品運輸用口袋.口袋類型和與包裝有關的內襯袋的選擇推薦規范 | Sacks for the transport of food aid - Recommendations on the selection of type of sack and the liner in relation to the product to be packed |
| BS EN 12246-1999 | 貨盤和包裝用木材的質量分類 | Quality classification of timber used in pallets and packaging |
| BS EN 12248-1999 | 工業包裝用的鋸材.允許偏差和最佳尺寸 | Sawn timber used in industrial packaging - Permitted deviations and preferential sizes |
| BS EN 12374-1998 | 包裝.軟管.術語 | Packaging - Flexible tubes - Terminology |
| BS EN 12375-1998 | 包裝.軟鋁管.壁厚度測定方法 | Packaging - Flexible aluminium tubes - Wall thickness determination method |
| BS EN 12377-1999 | 包裝材料.軟管.封裝氣密性試驗方法 | Packaging - Flexible tubes - Test method for the airtightness of closures |
| BS EN 12546-3-2000 | 與食品接觸的材料和器具.家用保溫容器.熱包裝材料規范 | Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Specification for thermal packs |
| BS EN 12566-3-2005 | ＜50 PT的小型廢水處理系統.第3部分:包裝的和/或現場組裝的家用廢水處理設備 | Small wastewater treatment systems for up to 50 PT — Part 3: Packaged and/or site assembled domestic wastewater treatment plants |
| BS EN 12702-2000 | 包裝和一次性衛生用品用紙和紙板用膠粘劑.潛在膠粘層阻隔測定 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of blocking behaviour of potentially adhesive layers |
| BS EN 12703-1999 | 紙,紙板,包裝和一次性衛生產品用膠粘劑.低溫柔韌性和凍裂溫度的測定 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature |
| BS EN 12704-2000 | 紙,紙板,包裝和一次性衛生產品用膠粘劑.含水膠粘劑泡沫形成測定 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation for aqueous adhesives |
| BS EN 12726-2000 | 包裝.口徑為18.5mm的瓶口用軟木塞和錐度明顯的瓶塞 | Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules |
| BS EN 12960-2001 | 紙,紙板,包裝和一次性衛生用品用膠粘劑.剪切強度測定 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance |
| BS EN 13010-2003 | 包裝.單件包裝.標記板顯示的尺寸和要求 | Packaging - Unit packaging - Dimensions and requirements for pegboard display |
| BS EN 13025-1-2005 | 包裝.輕型金屬包裝箱.第1部分:容積最大不超過40000ml的圓形、柱形和錐形通用金屬容器標稱填充體積 | Packaging — Light gauge metal containers — Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml |
| BS EN 13025-2-2005 | 包裝.輕型金屬容器.20000ml、25000ml和30000ml標稱容量不可移動蓋(活蓋)圓鋼和馬口鐵容器 | Packaging — Light gauge metal containers — Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml |
| BS EN 13025-3-2005 | 包裝.輕型金屬容器.20000ml、25000ml和30000ml標稱容量可移動蓋(活蓋)圓鋼和馬口鐵容器 | Packaging — Light gauge metal containers — Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml |
| BS EN 13026-2001 | 包裝.輕型金屬包裝.一般用途的非圓形,圓柱形,錐形容積達30000ml的金屬容器的標稱填充容積 | Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml |
| BS EN 13027-2001 | 包裝.輕型金屬包裝.由標稱容量限定的圓形敞口容器 | Packaging - Light-gauge metal packaging - Open-top round cans defined by their nominal gross-lidded capacity |
| BS EN 13028-2001 | 包裝.輕型金屬包裝.由標稱容量限定的有或無填充氣體的圓形敞口容器 | Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with or without added gas, defined by their nominal filling volumes |
| BS EN 13029-2001 | 包裝.輕型金屬包裝.塞塑料封閉物的縫隙 | Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures |
| BS EN 13045-2000 | 包裝.圓柱形塑料軟管.尺寸和公差 | Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances |
| BS EN 13046-2000 | 包裝.圓柱形金屬軟管.尺寸和公差 | Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances |
| BS EN 13047-2000 | 包裝.錐形金屬軟管.尺寸和公差 | Packaging - Flexible conical metallic tubes - Dimensions and tolerances |
| BS EN 13048-2000 | 包裝.鋁軟管.內部清漆膜厚度測量方法 | Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method |
| BS EN 13054-2001 | 包裝.完全填充運輸包裝.包裹重心測定方法 | Packaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a package |
| BS EN 13117-1-2000 | 運輸包裝.可重復使用的剛性塑料配送箱.通用配送箱 | Transport packaging - Reusable, rigid plastics distribution boxes - General purpose application |
| BS EN 13117-2-2000 | 運輸包裝.可重復使用的剛性塑料配送箱.通用試驗規范 | Transport packaging - Reusable, rigid plastics distribution boxes - General specifications for testing |
| BS EN 13193-2000 | 包裝.包裝和環境.術語 | Packaging - Packaging and the environment - Terminology |
| BS EN 13199-1-2000 | 包裝.低負荷載運系統.通用要求和試驗方法 | Packaging - Small load carrier systems - Common requirements and test methods |
| BS EN 13199-2-2000 | 包裝.低負荷載運系統.柱形疊架制(CSS) | Packaging - Small load carrier systems - Column Stackable System (CSS) |
| BS EN 13199-3-2000 | 包裝.低負荷載運系統.聯結式疊架制(BSS) | Packaging - Small load carrier systems - Bond Stackable System (BSS) |
| BS EN 13246-2001 | 包裝.捆扎鋼帶規范 | Packaging - Specification for tensional steel strapping |
| BS EN 13393-2001 | 包裝.邊緣保護器的規范 | Packaging - Specification for edge protectors |
| BS EN 13394-2001 | 包裝.非金屬拉伸帶材規范 | Packaging - Specification for non-metallic tensional strapping |
| BS EN 13427-2004 | 包裝.包裝和包裝廢棄物歐洲標準的使用要求 | Packaging - Requirements for the use of European Standards in the field of packaging and packaging waste |
| BS EN 13428-2004 | 包裝.生產和組成的特殊要求.資源減少的預防 | Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction |
| BS EN 13429-2004 | 包裝.重復使用 | Packaging - Reuse |
| BS EN 13430-2004 | 包裝.通過材料再循環評定包裝可回收性的要求 | Packaging - Requirements for packaging recoverable by material recycling |
| BS EN 13431-2004 | 包裝.以能量恢復的形式評定包裝可回收性的要求(包括最小次熱值規范) | Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value |
| BS EN 13432-2000 | 包裝.通過合成及生物降解規定包裝可回收性的求.試驗計劃和包裝最終驗收評定標準 | Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging |
| BS EN 13437-2004 | 包裝和材料回收.回收方法的標準.回收過程和流程圖的描述 | Packaging and material recycling - Criteria for recycling methods - Description of recycling processes and flow chart |
| BS EN 13439-2004 | 包裝.能源回收率.定義和計算方法 | Packaging - Rate of energy recovery - Definition and method of calculation |
| BS EN 13440-2004 | 包裝.回收率.定義和計算方法 | Packaging - Rate of recycling - Definition and method of calculation |
| BS EN 13461-2001 | 包裝.圓柱柔性疊層板管道.尺寸和公差 | Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances |
| BS EN 13538-3-2002 | 睡袋尺寸特性的測定.加載下的容積和易包裝性 | Determination of dimensional characteristics of sleeping bags - Volume under load and easiness of packing |
| BS EN 13590-2003 | 包裝.各種零售貨物運輸用柔性裝載袋.體積和裝載量測定的一般特性和試驗方法 | Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity |
| BS EN 13593-2003 | 包裝.家用廢棄物收集紙袋.類型、要求和試驗方法 | Packaging - Paper sacks for household waste collection - Types, requirements and test methods |
| BS EN 13626-2003 | 包裝.框形貨盤.一般要求和試驗方法 | Packaging - Box pallets - General requirements and test methods |
| BS EN 13628-1-2002 | 包裝.軟性包裝材料.應用靜態液體上部氣體色譜分析法測定剩余溶質.絕對法 | Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Absolute methods |
| BS EN 13628-2-2002 | 包裝.軟性包裝材料.應用靜態液體上部氣相色譜分析法測定殘余溶質.工業法 | Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Industrial methods |
| BS EN 13920-14-2003 | 鋁和鋁合金.廢料.廢鋁包裝件 | Aluminium and aluminium alloys - Scrap - Scrap from post-consumer aluminium packagings |
| BS EN 13920-15-2003 | 鋁和鋁合金.廢料.已去除廢鋁包裝件中涂層的鋁廢料 | Aluminium and aluminium alloys - Scrap - Decoated aluminium scrap from post-consumer aluminium packagings |
| BS EN 14045-2003 | 包裝.在規定了合成條件的實際定向試驗中包裝材料分解的評定 | Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions |
| BS EN 14046-2003 | 包裝.在可控合成條件下包裝材料的最大需氧生物降解性和分解的評定.釋放的二氧化碳的分析方法 | Packaging - Evaluation of the ultimate aerobic biodegradability and disintegration of packaging materials under controlled composting conditions - Method by analysis of released carbon dioxide |
| BS EN 14047-2003 | 包裝.測定在水介質中包裝材料的最終需氧生物降解性.析出二氧化碳分析法 | Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide |
| BS EN 14048-2002 | 包裝.測定在水介質中包裝材料的最終需氧生物降解性.封閉式呼吸機需氧量測量方法 | Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer |
| BS EN 14053-2004 | 包裝.瓦楞或?qū)嵭睦w維紙板制成的包裝件.類型和結構 | Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction |
| BS EN 14054-2004 | 包裝.紙和紙板包裝.紙板箱的設計 | Packaging - Paper and paperboard packaging - Design of cartons |
| BS EN 14149-2004 | 包裝.完全滿運輸包裝件和成組貨件.旋轉下落的沖擊試驗 | Packaging - Complete, filled transport packages and unit loads - Impact test by rotational drop |
| BS EN 14182-2002 | 包裝.術語.基本術語和定義 | Packaging - Terminology - Basic terms and definitions |
| BS EN 14287-2004 | 鋁和鋁合金.包裝和包裝元件制造用產品的化學成分的具體要求 | Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components |
| BS EN 14375-2005 | 保護兒童的不可重封口的藥品包裝.要求及試驗 | Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing |
| BS EN 14391-2004 | 包裝.可折疊鋁管.觸摸式危險警告 | Packaging - Collapsible aluminium tubes - Tactile warnings of danger |
| BS EN 14427-2004 | 液化石油氣(LPG)用可移動的可再充填式全包裝復合氣瓶.設計和建造 | Transportable refillable fully wrapped composite cylinders for liquefied petroleum gases (LPG) - Design and construction |
| BS EN 14477-2004 | 包裝.柔性包裝材料.抗擊穿性的測定.試驗方法 | Packaging - Flexible packaging material - Determination of puncture resistance - Test methods |
| BS EN 14479-2004 | 包裝.柔性包裝材料.用動態液上氣相色譜法測定剩余溶劑.絕對法 | Packaging — Flexible packaging material — Determination of residual solvents by dynamic headspace gas chromatography — Absolute method |
| BS EN 14713-2005 | 紙和紙板、包裝和一次性清潔產品用膠粘劑.可能適合粘結的薄膜的摩擦性能測定 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding |
| BS EN 14798-2005 | 玻璃包裝.手動冠形開瓶器.尺寸 | Glass packaging — Hand-held crown bottle openers — Dimensions |
| BS EN 14806-2005 | 包裝.在實驗室試驗中模擬堆肥條件下初步評價包裝材料的分解 | Packaging - Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test |
| BS EN 14866-2005 | 釉瓷和搪瓷.空氣與氣體和氣體與氣體熱交換器用交流換熱、上釉和包裝的板材.規范 | Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications |
| BS EN 14867-2005 | 包裝.塑料冰凍袋.規范和試驗方法 | Packaging — Plastic freezer bags — Specifications and test methods |
| BS EN 14887-2005 | 玻璃包裝.開啟軟木塞工具.一般要求 | Glass packaging — Cork removal devices — General requirements |
| BS EN 14932-2006 | 塑料.包裝袋用伸縮熱塑性薄膜.要求和試驗方法 | Plastics — Stretch thermoplastic films for wrapping bales - Requirements and test methods |
| BS EN 14979-2006 | 包裝.柔性塑料/金屬疊層管.S13型噴嘴的尺寸公差 | Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13 |
| BS EN 15208-2007 | 危險物品的運輸槽罐.密封包裝運輸系統.工作原理和接口規范 | Tanks for transport of dangerous goods - Sealed parcel delivery systems - Working principles and interface specifications |
| BS EN 15385-2007 | 包裝.柔性疊層管.測定頭部焊接強度的試驗方法 | Packaging - Flexible laminate tubes - Test methods to determine the strength of the head welding |
| BS EN 1719-1999 | 紙和紙板膠粘劑.包裝和一次性用衛生制品.壓敏膠粘劑粘著力測定.環行粘著力測定 | Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure-sensitive adhesives - Determination of loop tack |
| BS EN 1720-1999 | 紙和紙板膠粘劑.包裝和一次性用衛生制品.壓敏膠粘劑粘著力測定.分散性測定 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of dispersability |
| BS EN 1721-1999 | 紙張和紙板膠粘劑.包裝材料和一次性衛生制品.壓敏膠粘劑表面粘性測定.滾球法 | Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of rolling ball tack |
| BS EN 1895-2001 | 紙和紙板、包裝和一次性衛生產品用膠粘劑.柔性對柔性組裝的180°"T"型剝離試驗 | Adhesives for paper and board, packaging and disposable sanitary products - 180 °. "T" peel test for a flexible-to-flexible assembly |
| BS EN 1896-2001 | 紙和紙板用膠粘劑.包裝和一次性衛生用品.拉伸強度和伸長性的測定 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation |
| BS EN 22206-1988 | 整包運輸包裝件.在試驗時各部件的識別方法 | Complete, filled transport packages - Method for identifying parts when testing |
| BS EN 22248-1986 | 整包運輸包裝件.耐垂直跌落碰撞的性能測定方法 | Complete, filled transport packages - Method for determination of resistance to vertical impact by dropping |
| BS EN 22872-1993 | 整包運輸包裝耐壓性測定方法 | Complete, filled transport packages - Method for determination of resistance to compression |
| BS EN 22874-1986 | 整包運輸包裝件.壓縮試驗機用堆放試驗方法 | Complete, filled transport packages - Method of test for stacking using compression tester |
| BS EN 22876-1986 | 整包運輸包裝件.耐滾動破壞的性能測定方法 | Complete, filled transport packages - Method for determination of resistance to damage by rolling |
| BS EN 24178-1981 | 涉及完整、滿載運輸包裝分發試驗信息記錄規范 | Specification for information to be recorded in distribution trials involving complete, filled transport packages |
| BS EN 26590-1-1993 | 包裝袋.第1部分:術語和類型.紙袋 | Packaging - Sacks - Vocabulary and types - Paper sacks |
| BS EN 26590-2-1993 | 包裝袋.第2部分:術語和類型.熱塑性塑料軟薄膜袋 | Packaging - Sacks - Vocabulary and types - Sacks made from thermoplastic flexible film |
| BS EN 26591-1-1993 | 包裝袋.第1部分:測量方法和說明.空紙袋 | Packaging - Sacks - Description and method of measurement - Empty paper sacks |
| BS EN 26591-2-1993 | 包裝袋.第2部分:測量方法和說明.熱塑性塑料軟薄膜空袋 | Packaging - Sacks - Description and method of measurement - Empty sacks made from thermoplastic flexible film |
| BS EN 26599-1-1993 | 包裝袋.檢驗環境調節.第1部分:紙袋 | Packaging - Sacks - Conditioning for testing - Paper sacks |
| BS EN 27023-1993 | 包裝袋.檢驗用空袋取樣方法 | Packaging - Sacks - Method of sampling empty sacks for testing |
| BS EN 27965-1-1993 | 包裝袋.第1部分:跌落試驗.紙袋 | Packaging - Sacks - Drop test - Paper sacks |
| BS EN 28474-1987 | 滿包運輸包裝件.耐浸水性能測定方法 | Complete, filled transport packages - Method for determination of resistance to immersion in water |
| BS EN 28768-1987 | 滿包運輸包裝件.耐顛覆損壞性能測定方法 | Complete, filled transport packages - Method for determination of resistance to damage by toppling |
| BS EN 29454-1-1994 | 軟釬焊劑.分類和要求.分類、標簽和包裝 | Soft soldering fluxes - Classification and requirements - Classification, labelling and packaging |
| BS EN 365-2004 | 預防高空墜落的個人保護設備.使用、維護、周期檢驗、修理、標記和包裝說明的一般要求 | Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging |
| BS EN 415-1-2000 | 包裝機械的安全性.包裝機械和相關設備術語和分類 | Safety of packaging machines - Terminology and classification of packaging machines and associated equipment |
| BS EN 415-2-2000 | 包裝設備的安全.預制剛性容器包裝設備 | Safety of packaging machines - Pre-formed rigid container packaging machines |
| BS EN 415-3-2000 | 包裝機械的安全性.成型,填充和密封機械 | Safety of packaging machines - Form, fill and seal machines |
| BS EN 415-4-1998 | 機械包裝的安全性.托板裝載裝置和托板卸載裝置 | Safety of packaging machines - Palletizers and depalletizers |
| BS EN 415-5-2006 | 包裝機械安全.包裝機械 | Safety of packaging machines - Wrapping machines |
| BS EN 415-6-2006 | 包裝機械的安全性.第6部分:托盤包裝機械 | Safety of packaging machines - Part 6: Pallet wrapping machines |
| BS EN 415-7-2006 | 包裝機械安全.組件和二次包裝機械 | Safety of packaging machines - Group and secondary packaging machines |
| BS EN 60191-6-3-2001 | 半導體裝置的機械標準化.表面固定半導體裝置包裝外廓線繪制一般規則.包裝尺寸測量方法 | Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of quad flat packs (QFP) |
| BS EN 60264-3-5-1999 | 繞組線的包裝.錐形筒輸出線軸.熱塑材料制成的線軸容器規范 | Packaging of winding wires - Taper barrelled delivery spools - Specification for spool containers made from thermoplastic material |
| BS EN 60286-1-1998 | 自動裝卸元件的包裝.軸向引導連續帶的元件用帶包裝 | Packaging of components for automatic handling - Tape packaging of components with axial leads on continuous tapes |
| BS EN 60286-2-1998 | 自動裝卸元件的包裝.具有連續帶上非直接引導的元件的帶狀包裝 | Packaging of components for automatic handling - Tape packaging of components with unidirectional leads on continuous tapes |
| BS EN 60286-3-2007 | 自動處理用元件的包裝.在連續傳送帶上的表面安裝元件的包裝 | Packaging of components for automatic handling - Packaging of surface mount components on continuous tapes |
| BS EN 60286-5-2004 | 自動裝卸元件的包裝.矩陣盤 | Packaging of components for automatic handling - Matrix trays |
| BS EN 60286-6-2004 | 自動裝配用元件的包裝.表面安裝元件的散裝盒包裝 | Packaging of components for automatic handling - Bulk case packaging for surface mounting components |
| BS EN 60512-11-13-2002 | 電子設備連接器.試驗和測量.氣候試驗.試驗11n.無釬焊包裝連接的氣密性 | Connectors for electronic equipment - Tests and measurements - Climatic tests - Test 11n - Gas tightness, solderless wrapped connections |
| BS EN 61076-4-108-2003 | 電子設備連接器.經質量評定的印制板連接器.符合IEC 60917-1的基本網格為2.5mm、有25mm模數間距和集成屏蔽功 | Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
| BS EN 62090-2003 | 使用條形碼和二維符號的電子元器件的產品包裝標簽 | Product package labels for electronic components using bar code and two-dimensional symbologies |
| BS EN 62137-2004 | 環境和耐用試驗.區域陣列式包裝件表面安裝板的試驗方法FBGA、BGA、FLGA、LGA、SON和QFN | Environmental and endurance testing - Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN |
| BS EN 62148-11-2004 | 纖維光學有源元件及器件.包裝和接口標準.14針調制器集成激光二極管發射機 | Fibre optic active components and devices - Package and interface standards - 14-pin modulator-integrated laser diode transmitters |
| BS EN 62148-12-2004 | 纖維光學有源元件和器件.包裝和接口標準.帶同軸RF連接器的激光發射機 | Fibre optic active components and devices - Package and interface standards - Laser transmitters with coaxial RF connector |
| BS EN 62148-4-2004 | 纖維光學有源元件和器件.包裝和接口標準.PN 1x9塑料光纖無線電收發信機 | Fibre optic active components and devices - Package and interface standards - PN 1x9 plastic optical fibre transceivers |
| BS EN 62148-6-2003 | 纖維光學有源元件及器件.包裝和接口標準.ATM-PON無線電收發信機 | Fibre optic active components and devices - Package and interface standards - ATM-PON transceivers |
| BS EN 862-2005 | 包裝.防兒童拆開的包裝.非藥物產品用不能再封包的包裝要求和試驗程序 | Packaging — Childresistant packaging — Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products |
| BS EN 868-10-2000 | 準備消毒的醫療裝置用的包裝材料和系統.用于生產熱密封袋,卷軸和合蓋的粘接劑包覆的非紡織的聚烯烴材料.要 | Packaging materials and systems for medical devices which are to be sterilized - Adhesive coated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids - Requirements and test methods |
| BS EN 868-2-1999 | 準備消毒的醫療設備用的包裝材料和系統.消毒包裹物.要求和試驗方法 | Packaging materials and systems for medical devices which are to be sterilized - Sterilization wrap - Requirements and test methods |
| BS EN 868-3-1999 | 準備消毒的醫療設備用的包裝材料和系統.生產紙袋用的紙(EN 868-4中規定的)和生產盒和卷筒用的紙(EN 868-5中 | Packaging materials and systems for medical devices which are to be sterilized - Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5): Requirements and test methods |
| BS EN 868-4-1999 | 準備消毒的醫療設備用的包裝材料和系統.紙袋.要求和試驗方法 | Packaging materials and systems for medical devices which are to be sterilized - Paper bags - Requirements and test methods |
| BS EN 868-5-1999 | 消毒的醫療設備用包裝材料和系統.紙和塑料薄膜制的熱和可自密封袋及卷繞材料.要求和試驗方法 | Packaging materials and systems for medical devices which are to be sterilized - Heat and self-sealable pouches and reels of paper and plastic film construction - Requirements and test methods |
| BS EN 868-6-1999 | 準備消毒的醫療設備用的包裝材料和系統.經氧化乙烯或輻照殺菌的生產醫用包裹的紙.要求和試驗方法 | Packaging materials and systems for medical devices which are to be sterilized - Paper for the manufacture of packs for medical use for sterilization by ethylene oxide or irradiation - Requirements and test methods |
| BS EN 868-7-1999 | 準備消毒的醫療設備用的包裝材料和系統.經環氧乙烷或輻射消毒的生產醫用熱密封包裹的粘性涂覆紙.要求和試驗 | Packaging materials and systems for medical devices which are to be sterilized - Adhesive coated paper for the manufacture of heat sealable packs for medical use for sterilization by ethylene oxide or irradiation - Requirements and test methods |
| BS EN 868-8-1999 | 準備消毒的醫療設備用的包裝材料和系統.符合EN 285規定的蒸汽消毒器用的可重復使用的消毒容器.要求和試驗方 | Packaging materials and systems for medical devices which are to be sterilized - Re-usable sterilization containers for steam sterilizers conforming to EN 285: Requirements and test methods |
| BS EN 868-9-2000 | 準備消毒的醫療裝置用的包裝材料和系統.用于生產熱密封袋,卷軸和合蓋的非包敷的非紡織聚烯烴材料.要求和試 | Packaging materials and systems for medical devices which are to be sterilized - Uncoated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids - Requirements and test methods |
| BS EN ISO 10303-210-2002 | 工業自動化系統和集成.產品數據表示和信息交流.應用協議.電子組裝、互連和包裝設計 | Industrial automation systems and integration - Product data representation and exchange - Application protocol - Electronic assembly, interconnection, and packaging design |
| BS EN ISO 11607-1-2006 | 終端無菌醫學設備的包裝.原材料、消毒阻擋系統和包裝的要求 | Packaging for terminally sterilized medical devices - Requirements for materials, sterile barrier systems and packaging systems |
| BS EN ISO 11607-2-2006 | 終端無菌醫學設備的包裝.組成、密封和裝配過程的確認要求 | Packaging for terminally sterilized medical devices - Validation requirements for forming, sealing and assembly processes |
| BS EN ISO 11683-1997 | 包裝.觸摸危險警告的要求 | Packaging - Tactile warnings of danger - Requirements |
| BS EN ISO 11897-2001 | 包裝.熱塑性塑料軟薄膜袋.折邊處的撕裂擴展試驗 | Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds |
| BS EN ISO 12048-2001 | 包裝.滿裝運輸包裝.用壓力試驗機的壓力試驗和堆積試驗 | Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester |
| BS EN ISO 13355-2002 | 包裝.完全滿運輸包裝件和成組貨件.垂直隨機振動試驗 | Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test |
| BS EN ISO 15378-2006 | 藥品的主要包裝材料.以最佳制造實踐(GMP)為參考的ISO 9001:2000應用的特殊要求 | Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2000, with reference to Good Manufacturing Practice (GMP) |
| BS EN ISO 16101-2004 | 包裝.危險物品的運輸包裝.塑料可混用性檢驗 | Packaging - Transport packaging for dangerous goods - Plastics compatibility testing |
| BS EN ISO 16103-2006 | 包裝.危險物品運輸包裝.再生塑料材料 | Packaging - Transport packages for dangerous goods - Recycled plastics material |
| BS EN ISO 16104-2003 | 包裝.危險物品的運輸包裝.試驗方法 | Packaging - Transport packaging for dangerous goods - Test methods |
| BS EN ISO 16106-2006 | 包裝.危險貨品運輸包裝.危險貨物包裝、中間散貨容器(IBCs)和大型包裝.應用ISO 9001的指南 | Packaging - Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 |
| BS EN ISO 16467-2004 | 包裝.危險貨物的運輸包裝.IBCs的試驗方法 | Packaging - Transport packaging for dangerous goods - Test methods for IBCs |
| BS EN ISO 21898-2006 | 包裝.非危險貨物用軟的過渡性散貨集裝箱(FIBCs) | Packaging - Flexible intermediate bulk containers (FIBCs) for non-dangerous goods |
| BS EN ISO 2233-2001 | 包裝.滿裝的運輸包裝件和單元貨物.試驗狀態的調節 | Packaging - Complete, filled transport packages and unit loads - Conditioning for testing |
| BS EN ISO 2234-2002 | 包裝.完全滿裝的運輸包裝和單元裝載.利用靜態裝載法進行堆積試驗 | Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load |
| BS EN ISO 2244-2002 | 包裝.完全滿裝運輸包裝和單元裝載.水平?jīng)_擊試驗 | Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests |
| BS EN ISO 2247-2003 | 包裝.滿裝的運輸包裝件和單件荷載.固定低頻率振動試驗 | Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency |
| BS EN ISO 23667-2007 | 包裝.危險貨物的運輸包裝.硬質塑料和塑料合成的IBCs.兼容性測試 | Packaging - Transport packaging for dangerous goods - Rigid plastics and plastics composite IBCs - Compatibility testing |
| BS EN ISO 2873-2003 | 包裝.滿裝運輸包裝件和單件荷載.低壓試驗 | Packaging - Complete, filled transport packages and unit loads - Low pressure test |
| BS EN ISO 2875-2002 | 包裝.完全滿裝的運輸包裝件和單元裝載.水噴淋試驗 | Packaging - Complete, filled transport packages and unit loads - Water-spray test |
| BS EN ISO 7711-1-1998 | 牙科用旋轉器械.金剛鉆器具.尺寸、要求、標記和包裝 | Dental rotary instruments - Diamond instruments - Dimensions, requirements, marking and packaging |
| BS EN ISO 780-1999 | 包裝.貨物裝卸的圖形標志 | Packaging - Pictorial marking for handling of goods |
| BS EN ISO 7965-2-1995 | 包裝.包裝袋.跌落試驗.第2部分:熱塑性塑料軟簿膜包裝袋 | Sacks - Drop test - Sacks made from thermoplastic flexible film |
| BS EN ISO 801-1-1995 | 紙漿.成批銷售質量的測定.板式成捆包裝的紙漿 | Pulps - Determination of saleable mass in lots - Pulp baled in sheet form |
| BS EN ISO 8317-2005 | 防兒童拆開的包裝.可再次包裝的要求和試驗程序 | Child-resistant packaging - Requirements and testing procedures for reclosable packages |
| BS EN ISO 8318-2002 | 包裝.完全滿裝運輸包裝和單元裝載.用變頻進行正弦波振動試驗 | Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency |
| BS EN ISO 8351-1-1995 | 包裝.袋包裝規格方法.紙袋 | Packaging - Method of specification for sacks - Paper sacks |
| BS EN ISO 8351-2-1995 | 包裝.包裝袋分類方法.熱塑性塑料軟薄膜包裝袋 | Packaging - Method of specification for sacks - Sacks made from thermoplastic flexible film |
| BS EN ISO 8367-1-1995 | 包裝.一般用途包裝袋的尺寸公差.紙袋 | Packaging - Dimensional tolerances for general purpose sacks - Paper sacks |
| BS EN ISO 8367-2-1995 | 包裝.一般用途包裝袋的尺寸公差.熱塑性塑料軟薄膜包裝袋 | Packaging - Dimensional tolerances for general purpose sacks - Sacks made from thermoplastic flexible film |
| BS ISO 10531-1995 | 包裝.滿裝的運輸包裝.成組貨件穩定性試驗 | Packaging - Complete, filled transport packages - Stability testing of unit loads |
| BS ISO 13302-2003 | 感官分析.評定食品包裝引起的味道改變的方法 | Sensory analysis - Methods for assessing modifications to the flavour of foodstuffs due to packaging |
| BS ISO 13355-2002 | 包裝.完全填充的運輸包裝和單元裝載.垂直隨機振動試驗 | Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test |
| BS ISO 1434-1996 | 包裝式天然橡膠.包裝涂層量的測定 | Natural rubber in bales - Amount of bale coating - Determination |
| BS ISO 14535-2001 | 攝影技術.電子掃描儀、成像膠片和膠卷的室光負載包裝件.尺寸和有關要求 | Photography - Room-light loading packages for electronic scanners and image-setting film and paper rolls - Dimensions and related requirements |
| BS ISO 14850-1-2004 | 核能.廢棄物包裝件的活性測量.帶公開幾何條件的整體模型中的高分辨率γ光譜測定法 | Nuclear energy - Waste-packages activity measurement - High-resolution gamma spectrometry in integral mode with open geometry |
| BS ISO 15378-2006 | 藥品的主要包裝材料.以優秀制造實踐(GMP)為基準對ISO 9001:2000應用的特殊要求 | Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2000, with reference to good manufacturing practice (GMP) |
| BS ISO 15394-2000 | 包裝.航運、運輸和驗收標簽的兩維符號和條形碼 | Packaging - Bar code and two-dimensional symbols for shipping, transport and receiving labels |
| BS ISO 15750-1-2002 | 包裝.鋼筒.最小總?cè)萘繛?208 升、 210 升和216.5 升的活動蓋圓筒(蓋可拆下) | Packaging - Steel drums - Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l |
| BS ISO 15750-2-2002 | 包裝.鋼筒.最小總?cè)萘繛?212升、216,5 升和 230 升的密封蓋圓筒 | Packaging - Steel drums - Non-removable head (tight head) drums with a minimum total capacity of 121 l, 216,5 l and 230 l |
| BS ISO 15750-3-2002 | 包裝.鋼筒.插入法蘭型密封系統 | Packaging - Steel drums - Inserted flange-type closure systems |
| BS ISO 16883-2007 | 包裝.危險物品運輸包裝件.大包裝試驗方法 | Packaging - Transport packages for dangerous goods - Test methods for large packagings |
| BS ISO 1997-1993 | 粒狀軟木和軟木粉.分類、性能和包裝 | Granulated cork and cork powder - Classification, properties and packing |
| BS ISO 20299-1-2006 | 橡膠包包裝用薄膜.丁二烯橡膠(BR)和丁苯橡膠(SBR) | Film for wrapping rubber bales - Butadiene rubber (BR) and styrene-butadiene rubber (SBR) |
| BS ISO 20848-1-2007 | 包裝.塑料圓筒.標稱容量113.6 L～220 L的活動開口圓桶 | Packaging - Plastics drums - Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l |
| BS ISO 20848-2-2007 | 包裝.塑料桶.標稱容量208.2 L和220 L的固定蓋(密封蓋)圓桶 | Packaging - Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l |
| BS ISO 20848-3-2007 | 包裝.塑料圓筒.標稱容量113.6 L～220 L塑料圓桶的塞子/桶孔關閉系統 | Packaging - Plastics drums - Plug/bungs closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l |
| BS ISO 22715-2006 | 化妝品.包裝和標簽 | Cosmetics - Packaging and labelling |
| BS ISO 3869-2001 | 合成材料的瓶塞.膨脹連接填料.規范、包裝和標記 | Composition cork - Expansion joint fillers - Specifications, packaging and marking |
| BS ISO 4709-2001 | 復合軟木.襯墊材料.分類體系、要求、取樣、包裝和標記 | Composition cork - Gasket material - Classification system, requirements, sampling, packing and marking |
| BS ISO 4714-2000 | 合成軟木.規范、抽樣、包裝和作標記 | Composition cork - Specifications, sampling, packaging and marking |
| BS ISO 5989-1996 | 攝影技術.鹵化銀基照相材料沖洗用預包裝化學制品.詞匯 | Photography - Pre-packaged chemicals for the processing of silver halide based photographic materials - Vocabulary |
| BS ISO 6196-4-1999 | 顯微攝影.詞匯.第4部分:材料和包裝 | Micrographics - Vocabulary - Materials and packaging |
| BS ISO 6670-2002 | 速溶咖啡.帶內襯層的散裝單元包裝的取樣方法 | Instant coffee - Sampling method for bulk units with liners |
| BS ISO 8009-9-1997 | 可重復使用的橡膠避孕工具.第9部分:包裝和標簽 | Reusable rubber contraceptive diaphragms - Packaging and labelling |
| BS ISO/IEC 11430-1995 | 信息技術.編程語言.ADA的初等函數的一般包裝 | Information technology. Programming languages. Generic package of elementary functions for ADA |
| BS ISO/IEC 11729-1995 | 信息技術.編程語言.ADA原函數的一般包裝 | Information technology. Programming languages. Generic package of primitive functions for Ada |
| BS PAS 103-2004 | 收集的廢塑料的包裝.用于再循環的收集和制備的良好規程指南和質量規范 | Collected waste plastics packaging - Specification for quality and guidance for good practice in collection and preparation for recycling |
| BS SP 13, 14, 15 and 16-1949 | 飛行器用墊圈規范(主要用于包裝) | Specification for washers for aircraft purposes (primarily for packing purposes) |
| KIT 15-1999 | 玩具安全包裝 | Toy safety pack |
| KIT 69-2001 | 包裝和環境叢書 | Packaging and the environment set |
| PD 6592-1996 | 包裝.包裝用能源恢復 | Packaging. Energy recovery from used packaging |
| PD 6607-1996 | 包裝.包裝系統用壽命周期庫存管理分析的推薦標準 | Packaging. Recommendations for conducting life-cycle inventory analysis of packaging systems |
| PD ISO/TR 210-2000 | 香精油.包裝、狀態調節和儲存的一般規則 | Essential oils. General rules for packaging, conditioning and storage |
| 編號 | 中文名稱 | 英文名稱 |