| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BB 0006-2003 | 包裝容器20mm口徑鋁氣霧罐 | () |
| BB/T 0013-1999 | 軟塑折疊包裝容器 | () |
| BB/T 0016-2006 | 包裝材料 蜂窩紙板 | () |
| BB/T 0024-2003 | 運輸包裝用拉伸纏繞膜 | () |
| BB/T 0026-2004 | 夾筋包裝袋紙 | () |
| BB/T 0027-2004 | 埋紗包裝袋紙 | () |
| BB/T 0029-2004 | 包裝玻璃容器 公差 | () |
| BB/T 0030-2004 | 包裝用鍍鋁薄膜 | () |
| BB/T 0034-2006 | 包裝容器 扭斷式鋁防盜瓶蓋 | () |
| BB/T 0035-2006 | 家用電冰箱包裝 | () |
| BB/T 0036-2006 | 縫紉機包裝 | () |
| BB/T 0038-2006 | 包裝容器 1m3金屬中型散裝箱 | () |
| BB/T 0039-2006 | 商品零售包裝袋 | () |
| BB/T 0041-2007 | 包裝用多層共擠阻隔膜通則 | () |
| BB/T 0042-2007 | 包裝容器 鋁質農藥瓶 | () |
| BB/T 0044-2007 | 包裝容器 塑料農藥瓶 | () |
| BB/T 0045-2007 | 紙漿模塑制品 工業品包裝 | () |
| BB/T 0049-2008 | 包裝用礦物干燥劑 | Mineral desiccant for packaging |
| FZ 65006-1995 | 特種工業用紡織品 標志和包裝 | () |
| FZ 90005-1991 | 經紗管和緯紗管標志包裝 | () |
| FZ 90008-1991 | 有梭織機用梭子標志 包裝 | () |
| FZ/T 10008-1996 | 棉及化纖純紡、混紡本色紗線標志與包裝 | () |
| FZ/T 10009-1996 | 棉及化纖純紡、混紡本色布標志與包裝 | () |
| FZ/T 10010-1996 | 棉及化纖純紡、混紡印染布標志與包裝 | () |
| FZ/T 41003.3-1999 | 桑蠶綿球的標志、包裝和運輸、儲存 | () |
| FZ/T 80002-2008 | 服裝標志、包裝、運輸和貯存 | Marking ,packaging,transporation and storage for garments |
| FZ/T 90001-2006 | 紡織機械產品包裝 | () |
| FZ/T 90005-1991 | 經紗管和緯紗管標志、包裝 | () |
| FZ/T 90008-1991 | 有梭織機用梭子標志、包裝 | () |
| FZ/T 90054-1994 | 紡織機械儀器儀表產品包裝 | () |
| GB 10344-2005 | 預包裝飲料酒標簽通則 | General standard for the labeling of prepackaged alcoholic beverage |
| GB 11680-1989 | 食品包裝用原紙衛生標準 | Hygienic standard of paper used for food packaging |
| GB 12463-1990 | 危險貨物運輸包裝通用技術條件 | General specifications for transport packages of dangerous goods |
| GB 12711-1991 | 低、中水平放射性固體廢物包裝安全標準 | Standard of safety for low and intermediate-level solid radioactive waste packages |
| GB 13042-2008 | 包裝容器 鐵質氣霧罐 | () |
| GB 13113-1991 | 食品容器及包裝材料用聚對苯二甲酸乙二醇酯成型品衛生標準 | Hygienic standard for polyethylene terephthalate products used as food containers and packagingmaterials |
| GB 13114-1991 | 食品容器及包裝材料用聚對苯二甲酸乙二醇酯樹脂衛生標準 | Hygienic standardfor polyethylene terephthalate resin used as food containers and packaging materials |
| GB 13115-1991 | 食品容器及包裝材料用不飽和聚酯樹脂及其玻璃鋼制品衛生標準 | Hygienic standard for unsaturated polyester resin and glass fibre reinforced plastics used asfood containers and packaging materials |
| GB 13116-1991 | 食品容器及包裝材料用聚碳酸酯樹脂衛生標準 | Hygienic standard for polycarbonate resin used as foodcontainers and packaging materials |
| GB 13432-2004 | 預包裝特殊膳食用食品標簽通則 | General standard for the labeling of prepackaged foods for special dietary uses |
| GB 14147-1993 | 陶瓷包裝容器鉛、鎘溶出量允許極限 | Standard permissible limits of release of lead or cadmium from ceramic packaging vessel in contact with food |
| GB 14493-2003 | 工業炸藥包裝 | Package of industrial explosive |
| GB 14891.7-1997 | 輻照冷凍包裝畜禽肉類衛生標準 | Hygienic standard for irradiated frozen packaged meat of livestock and poultry |
| GB 14942-1994 | 食品容器、包裝材料用聚碳酸酯成型品衛生標準 | Hygienic standard for polycarbonate products used as food containers and packaging materials |
| GB 14944-1994 | 食品包裝用聚氯乙烯瓶蓋墊片及粒料衛生標準 | Hygienic standard for bottle sheet and granular materials of polyvinyl chloride for food packaging |
| GB 15204-1994 | 食品容器、包裝材料用偏氯乙烯-氯乙烯共聚樹脂衛生標準 | Hygienic standardof vinylidene chloride-vinyl chloride copolymer resins for food containers andpackaging material |
| GB 15219-1994 | 放射性物質運輸包裝質量保證 | Quality assurance for packaging used in thetransport of radioactive materials |
| GB 15346-1994 | 化學試劑包裝及標志 | Chemical reagent--Packaging and marking |
| GB 16331-1996 | 食品包裝材料用尼龍6樹脂衛生標準 | Hygienic standard of nylon 6 resins for food packaging material |
| GB 16332-1996 | 食品包裝材料用尼龍成型品衛生標準 | Hygienic standard of products of nylon for food packaging material |
| GB 16473-1996 | 黃磷包裝 | Packing for yellow phosphorus |
| GB 17326-1998 | 食品容器、包裝材料用橡膠改性的丙烯腈-丁二烯-苯乙烯成型品衛生標準 | Hygienic standard for rubber-modified acrylonitrile-butadiene-styrene products used as food containers and packaging materials |
| GB 17327-1998 | 食品容器、包裝材料用丙烯腈-苯乙烯成型品衛生標準 | Hygienic standard foracrylonitrile-styrene products used as food containers and packaging materials |
| GB 18191-2008 | 包裝容器 危險品包裝用塑料桶 | () |
| GB 18454-2001 | 液體食品無菌包裝用復合袋 | Laminated bags using for aseptic package of liquid food |
| GB 18455-2001 | 包裝回收標志 | Packaging recycle mark |
| GB 190-1990 | 危險貨物包裝標志 | Labels for packages of dangerous goods |
| GB 19105-2003 | 過氧乙酸包裝要求 | Requirements of packing for peroxyacetic acid |
| GB 19107-2003 | 次氯酸鈉溶液包裝要求 | Requirements of packing for sodium hypochloritesolution |
| GB 19109-2003 | 次氯酸鈣包裝要求 | Requirements of packing for calcium hypochlorite |
| GB 19160-2008 | 包裝容器 危險品包裝用塑料罐 | () |
| GB 19268-2003 | 固體氰化物包裝 | Solid cyanide packange |
| GB 19269.1-2003 | 公路運輸危險貨物包裝檢驗安全規范通則 | Safety code for inspection of packaging of dangerous goods transported by road--General specifications |
| GB 19269.2-2003 | 公路運輸危險貨物包裝檢驗安全規范性能檢驗 | Safety code for the inspection of packaging of dangerous goods transported by road--Performance inspection |
| GB 19269.3-2003 | 公路運輸危險貨物包裝檢驗安全規范使用鑒定 | Safety code for the inspection of packaging of dangerous goods transported by road--Use appraisal |
| GB 19270.1-2003 | 水路運輸危險貨物包裝檢驗安全規范通則 | Safety code for inspection of packaging of dangerous goods transported by water--General specifications |
| GB 19270.2-2003 | 水路運輸危險貨物包裝檢驗安全規范性能檢驗 | Safety code for inspection of packaging of dangerous goods transported by water--Performance inspection |
| GB 19270.3-2003 | 水路運輸危險貨物包裝檢驗安全規范使用鑒定 | Safety code for inspection of packaging of dangerous goods transported by water--Use appraisal |
| GB 19295-2003 | 速凍預包裝面米食品衛生標準 | Hygienic standard for quick-frozen and pre-packed food made of wheat flour and rice |
| GB 19304-2003 | 定型包裝飲料用水企業生產衛生規范 | Hygienic specifications of factory for packing drinking water |
| GB 19358-2003 | 黃磷包裝安全規范使用鑒定 | Safety code for the packaging of yellow phosphorus--Use appraisal |
| GB 19359.1-2003 | 鐵路運輸危險貨物包裝檢驗安全規范通則 | Safety code for inspection of packaging of dangerous goods transported by rail--General specifications |
| GB 19359.2-2003 | 鐵路運輸危險貨物包裝檢驗安全規范性能檢驗 | Safety code for the inspection of packaging of dangerous goods transported by rail--Performance inspection |
| GB 19359.3-2003 | 鐵路運輸危險貨物包裝檢驗安全規范使用鑒定 | Safety code for the inspection of packaging of dangerous goods transported by rail--Use appraisal |
| GB 19432.1-2004 | 危險貨物大包裝檢驗安全規范通則 | Safety code for inspection of large packagings for dangerous goods--General specifications |
| GB 19432.2-2004 | 危險貨物大包裝檢驗安全規范性能檢驗 | Safety code for inspection of large packagings for dangerous goods--Performance tests |
| GB 19432.3-2004 | 危險貨物大包裝檢驗安全規范使用鑒定 | Safety code for inspection of large packagings for dangerous goods--Use appraisal |
| GB 19433.1-2004 | 空運危險貨物包裝檢驗安全規范通則 | Safety code for the inspection of packaging of dangerous goods transported by air--General specifications |
| GB 19433.2-2004 | 空運危險貨物包裝檢驗安全規范性能檢驗 | Safety code for the inspection of packaging of dangerous goods transported by air--Performance tests |
| GB 19433.3-2004 | 空運危險貨物包裝檢驗安全規范使用鑒定 | Safety code for the inspection of packaging of dangerous goods transported by air--Use appraisal |
| GB 19453.1-2004 | 危險貨物電石包裝檢驗安全規范性能檢驗 | Safety code for inspection of packaging of dangerous goods for calcium carbide--Performance tests |
| GB 19453.2-2004 | 危險貨物電石包裝檢驗安全規范使用鑒定 | Safety code for inspection of packaging of dangerous goods for calcium carbide--Use appraisal |
| GB 19457.1-2004 | 危險貨物涂料包裝檢驗安全規范性能檢驗 | Safety code for inspection of packaging of dangerous goods for paint--Performance tests |
| GB 19457.2-2004 | 危險貨物涂料包裝檢驗安全規范使用鑒定 | Safety code for performance test of dangerous goods packaging for paint--Use appraisal |
| GB 19741-2005 | 液體食品包裝用塑料復合膜、袋 | The plastics laminated films and bags using for packaging of liquid food |
| GB 19778-2005 | 包裝玻璃容器鉛、鎘、砷、銻溶出允許限量 | Packaging glass containers-Release of lead cadmium arsenic and antimony-Permissible limits |
| GB 3796-2006 | 農藥包裝通則 | General rule for packing of pesticides |
| GB 4803-1994 | 食品容器、包裝材料用聚氯乙烯樹脂衛生標準 | Hygienic standard for polyvinyl chloride resin used as food container and packaging material |
| GB 4838-2000 | 農藥乳油包裝 | Packaging for emulsifiable concentrates of pesticides |
| GB 5606.2-2005 | 卷煙第2部分:包裝標識 | Cigarettes-mark |
| GB 5606.3-2005 | 卷煙第3部分:包裝、卷制技術要求及貯運 | Cigarettes--Technical Requirements for Packing,Making,Storage and Transport |
| GB 6975-2007 | 棉花包裝 | Cotton baling |
| GB 7718-2004 | 預包裝食品標簽通則 | General standard for the labeling of prepackaged foods |
| GB 8569-1997 | 固體化學肥料包裝 | Packing of solid chemical fertilizers |
| GB 9681-1988 | 食品包裝用聚氯乙烯成型品衛生標準 | Hygienic standard of products of polyvinyl chloride for food packaging |
| GB 9683-1988 | 復合食品包裝袋衛生標準 | Hygienic standard for composite laminated foodpackaging bag |
| GB 9685-2008 | 食品容器、包裝材料用添加劑使用衛生標準 | () |
| GB 9687-1988 | 食品包裝用聚乙烯成型品衛生標準 | Hygienic standard for polyethylene products used as food containers and tablewares |
| GB 9688-1988 | 食品包裝用聚丙烯成型品衛生標準 | Hygienic standard for polypropyrene products used as food containers and tablewares |
| GB 9689-1988 | 食品包裝用聚苯乙烯成型品衛生標準 | Hygienic standard for polystyrene products used as food containers and tablewares |
| GB 9690-1988 | 食品包裝用三聚氰胺成型品衛生標準 | Hygienic standard for melamine products used as food containers and tablewares |
| GB 9691-1988 | 食品包裝用聚乙烯樹脂衛生標準 | Hygienic standard for polyethylene resin used as food packaging material |
| GB 9692-1988 | 食品包裝用聚苯乙烯樹脂衛生標準 | Hygienic standard for polystyrene resinused as food packaging material |
| GB 9693-1988 | 食品包裝用聚丙烯樹脂衛生標準 | Hygienic standard for polypropyrene resinused as food packaging material |
| GB 9774-2002 | 水泥包裝袋 | Sacks for packing cement |
| GB/T 1019-2008 | 家用和類似用途電器包裝通則 | () |
| GB/T 10342-2002 | 紙張的包裝和標志 | Paper--Package and mark |
| GB/T 10346-2006 | 白酒檢驗規則和標志、包裝、運輸、貯存 | General principle of inspection for Chinese spirits |
| GB/T 10813.4-1989 | 青瓷器系列標準食用青瓷包裝容器 | Standard of celadon porcelain ware series--Celadon porcelain in contact with food for packing vessel |
| GB/T 11423-1989 | 日用陶瓷紙箱包裝技術條件 | Packaging specification of corrugated box fordomestic ceramics |
| GB/T 12123-2008 | 包裝設計通用要求 | () |
| GB/T 12339-2008 | 防護用內包裝材料 | Inner packaging materials in preservation |
| GB/T 12626.5-1990 | 硬質纖維板產品的標志、包裝、運輸和貯存 | Hard fibreboard--Marking，packaging，transportation and reservation of the products |
| GB/T 13039-1991 | 包裝術語菱鎂砼容器 | Packaging terms--Magnesium oxychloride concretecontainers |
| GB/T 13040-1991 | 包裝術語金屬容器 | Packaging terms--Metal containers |
| GB/T 13041-2005 | 包裝容器菱鎂砼箱 | Packaging containers-Magnesium oxychloride concrete case |
| GB/T 1305-1985 | 電氣絕緣熱固性層壓材料檢驗、標志、包裝、運輸和貯存通用規則 | The generalrules of electrical insulating laminated materials based on thermosetting resins for examining，marking，packing，transportation and storage |
| GB/T 13125-1991 | 機械工業產品濕熱帶防護包裝方法通則 | General rule for damp heat protective packaging methods of machinery products |
| GB/T 13126-1991 | 機械工業產品濕熱帶防護包裝通用技術條件 | General specification for damp heat protective packaging of machinery products |
| GB/T 13144-2008 | 包裝容器 竹膠合板箱 | () |
| GB/T 13201-1997 | 圓柱體運輸包裝尺寸系列 | Packaging--Dimensions of cylinder transport package |
| GB/T 13251-2008 | 包裝 鋼桶 嵌入式法蘭封閉器 | () |
| GB/T 13252-2008 | 包裝容器 鋼提桶 | () |
| GB/T 13297-1991 | 精密合金包裝、標志和質量證明書的一般規定 | General rules for packaging, marking and certification of precision alloys |
| GB/T 13384-2008 | 機電產品包裝通用技術條件 | () |
| GB/T 13385-2008 | 包裝圖樣要求 | () |
| GB/T 13477.4-2002 | 建筑密封材料試驗方法第4部分:原包裝單組分密封材料擠出性的測定 | Test method for building sealants--Part 4:Determination of extrudability of one-component sealants |
| GB/T 13483-1992 | 包裝術語印刷 | Package printing terms |
| GB/T 13491-1992 | 涂料產品包裝通則 | General rule for packing of coatings |
| GB/T 13607-1992 | 蘋果、柑桔包裝 | Packaging or apples and citrus fruit |
| GB/T 13757-1992 | 袋類運輸包裝尺寸系列 | Packaging--Dimensions of sack transport packages |
| GB/T 14013-1992 | 移動通信設備運輸包裝 | Mobile communication equipments--Transport package |
| GB/T 14187-2008 | 包裝容器 紙桶 | () |
| GB/T 14188-2008 | 氣相防銹包裝材料選用通則 | () |
| GB/T 14492-2008 | 一次性使用電石包裝鋼桶 | () |
| GB/T 14745-1993 | 包裝緩沖材料蠕變特性試驗方法 | Packaging--Cushioning materials--Testmethod for creep properties |
| GB/T 15000.6-1996 | 標準樣品工作導則(6)標準樣品包裝通則 | Directives for the work of reference materials(6)--General rules for package of certified reference materials |
| GB/T 15098-2008 | 危險貨物運輸包裝類別劃分方法 | () |
| GB/T 15170-2007 | 包裝容器 工業用薄鋼板圓罐 | Packing containers - Pails of sheet for industrial |
| GB/T 15171-1994 | 軟包裝件密封性能試驗方法 | Test method for leaks in sealed flexible packages |
| GB/T 15233-2008 | 包裝 單元貨物尺寸 | () |
| GB/T 15267-1994 | 食品包裝用聚氯乙烯硬片、膜 | Rigid polyvinyl chloride sheet and film forfoodstuff packing |
| GB/T 15545-1995 | 不定形耐火材料包裝、 標志、運輸和儲存 | Unshaped refractory--Packing， marking， transportation and storage |
| GB/T 15692.7-1995 | 制藥機械名詞術語藥品包裝機械 | Terms of pharmaceutical machinery--Pharmaceutical packaging machinery |
| GB/T 15718-2008 | 現場發泡包裝材料 | () |
| GB/T 15719-1995 | 現場發泡包裝 | Foam--In-place packaging |
| GB/T 15915-2007 | 包裝容器 固堿鋼桶 | Paking containers - Caustic alkali steel drum |
| GB/T 15956-2008 | 重復性使用電石包裝鋼桶 | () |
| GB/T 16176-1996 | 航空攝影產品的注記與包裝 | The notation and packing of the aerophotographic products |
| GB/T 16265-2008 | 包裝材料試驗方法 相容性 | () |
| GB/T 16266-2008 | 包裝材料試驗方法 接觸腐蝕 | () |
| GB/T 16267-2008 | 包裝材料試驗方法 氣相緩蝕能力 | () |
| GB/T 16471-2008 | 運輸包裝件尺寸與質量界限 | () |
| GB/T 16472-1996 | 貨物類型、包裝類型和包裝材料類型代碼 | Codes for types of cargo，packages and packaging materials |
| GB/T 16546-1996 | 定形耐火制品包裝、標志、運輸和儲存 | Shaped refractory products--Packing， marking， transportation and storage |
| GB/T 16716.1-2008 | 包裝與包裝廢棄物 第1部分：處理和利用通則 | () |
| GB/T 16717-1996 | 包裝容器重型瓦楞紙箱 | Packing containers--Heavy duty corrugated box |
| GB/T 16830-2008 | 商品條碼 儲運包裝商品編碼與條碼表示 | () |
| GB/T 16928-1997 | 包裝材料試驗方法透濕率 | Test method for vapor transmission rate of packaging materials |
| GB/T 16929-1997 | 包裝材料試驗方法透油性 | Test method for oil transmission rate of packaging material |
| GB/T 16958-2008 | 包裝用雙向拉伸聚酯薄膜 | Biaxially oriented polyester film for package |
| GB/T 17030-2008 | 食品包裝用聚偏二氯乙烯（PVDC）片狀腸衣膜 | () |
| GB/T 17109-1997 | 糧食銷售包裝 | Consumer pack of grain |
| GB/T 17306-1998 | 包裝標準消費者的需求 | Standards for packaging--Consumer requirements |
| GB/T 17343-1998 | 包裝容器方桶 | Packing containers--Square pail |
| GB/T 17344-1998 | 包裝包裝容器氣密試驗方法 | Packaging--Packing containers--Air-tighttest method |
| GB/T 17374-1998 | 食用植物油銷售包裝 | Sales package of edible vegetable oil |
| GB/T 17448-1998 | 集裝袋運輸包裝尺寸系列 | Packaging--Dimensions of flexible freight container transport packages |
| GB/T 17449-1998 | 包裝玻璃容器螺紋瓶口尺寸 | Packaging--Glass containers--Thread finish dimensions |
| GB/T 17858.1-2008 | 包裝袋 術語和類型 第1部分：紙袋 | () |
| GB/T 17858.2-1999 | 包裝術語工業包裝袋熱塑性塑料軟質薄膜袋 | Packaging--Sacks--Vocabulary and types--Sacks made from thermoplastic flexible film |
| GB/T 17876-1999 | 包裝容器塑料防盜瓶蓋 | Packaging volume--Plastic pilferproof closure |
| GB/T 18192-2008 | 液體食品無菌包裝用紙基復合材料 | () |
| GB/T 18522.6-2007 | 水文儀器通則 第6部分：檢驗規則及標志、包裝、運輸、貯存、使用說明書 | General specification for hydrometric instrument - Part 6 : Inspection regulation, mark, package, transportation，storage and operation manual |
| GB/T 18526.7-2001 | 冷卻包裝分割豬肉輻照殺菌工藝 | Code of good irradiation practice for chilled packaged pork cuts to control pathogens and/or extend shelf-life |
| GB/T 18706-2008 | 液體食品保鮮包裝用紙基復合材料 | () |
| GB/T 18926-2008 | 包裝容器 木構件 | () |
| GB/T 18927-2002 | 包裝容器金屬輔件 | Packaging containers--Master accessory |
| GB/T 19063-2003 | 液體食品包裝設備驗收規范 | Acceptance specification of packaging equipment for liquid food |
| GB/T 191-2008 | 包裝儲運圖示標志 | () |
| GB/T 19142-2008 | 出口商品包裝通則 | Packaging for export commodity general rule |
| GB/T 19161-2008 | 包裝容器 復合式中型散裝容器 | () |
| GB/T 19445-2004 | 貴金屬及其合金產品的包裝、標志、運輸、貯存 | Products of precious metalsand their alloys--Packing，marking，transporting and storing |
| GB/T 19459-2004 | 危險貨物及危險貨物包裝檢驗標準基本規定 | Rules of standards to the inspection of dangerous goods and dangerous goods packaging |
| GB/T 19532-2004 | 包裝材料氣相防銹塑料薄膜 | Packaging material--Volatile corrosion inhibiting film |
| GB/T 19633-2005 | 最終滅菌醫療器械的包裝 | Packaging for terminally sterilized medical devices |
| GB/T 19731-2005 | 盒式光盤(ODC)裝運包裝以及光盤標簽上的信息 | Information on Optical Disk Cartridges(ODC)shipping packages and ODC labels |
| GB/T 19784-2005 | 收縮包裝 | Shrink packaging |
| GB/T 19785-2005 | 拉伸纏繞包裝 | Stretch packaging |
| GB/T 19786-2005 | 木質包裝容器檢測規程 | Inspection Code for Wooden containers |
| GB/T 19787-2005 | 包裝材料聚烯烴熱收縮薄膜 | Heat-shrinkable Polyolefine Films for Packaging Materials |
| GB/T 19789-2005 | 包裝材料塑料薄膜和薄片氧氣透過性試驗庫侖計檢測法 | Packaging Material Standard Test Method for Oxygen Gas Permeability Characteristics of Plastic Film and Sheeting Using a Coulometric Sensor |
| GB/T 19946-2005 | 包裝 用于發貨、運輸和收貨標簽的一維條碼和二維條碼 | Packaging-Bar code and two-dimensional symbols for shipping,transport and receiving labels |
| GB/T 20476-2006 | 松材線蟲病發生區松木包裝材料處理和管理 | Pine wilt disease - Pine wood packing material - Treatment and management |
| GB/T 20499-2006 | 食品包裝用聚氯乙烯膜中己二酸二（2－乙基）己酯遷移量的測定 | Method for the determination of di (2-ethylhexyl) adipate migrating from polyvinyl chloride film in contact with foodstuffs |
| GB/T 20859-2007 | 包裝 袋 滿裝袋摩擦力的測定 | Packaging - Sacks - Determination of the friction of filled sacks |
| GB/T 20860-2007 | 包裝 熱塑性軟質薄膜袋 折邊處撕裂擴展試驗方法 | Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds |
| GB/T 2101-2008 | 型鋼驗收、包裝、標志及質量證明書的一般規定 | General requirement of acceptance, packaging, marking, and certification for section steel |
| GB/T 2102-2006 | 鋼管的驗收、包裝、標志和質量證明書 | Acceptance, packing, marking and quality certification of steel pipe |
| GB/T 2103-2008 | 鋼絲驗收、包裝、標志及質量證明書的一般規定 | () |
| GB/T 2104-2008 | 鋼絲繩包裝、標志及質量證明書的一般規定 | () |
| GB/T 21279-2007 | 危險化學品包裝液壓試驗方法 | Hydraulic test method for packaging of dangerous chemical products |
| GB/T 21302-2007 | 包裝用復合膜、袋通則 | General rules of laminated films & pouches for packaging |
| GB/T 21568-2008 | 危險品 包裝拉斷力試驗方法 | () |
| GB/T 21569-2008 | 危險品 大包裝頂部提升試驗方法 | () |
| GB/T 21583-2008 | 危險品 大包裝堆碼試驗方法 | () |
| GB/T 21584-2008 | 危險品 大包裝跌落試驗方法 | () |
| GB/T 21593-2008 | 危險品 包裝堆碼試驗方法 | () |
| GB/T 21599-2008 | 危險品 包裝跌落試驗方法 | () |
| GB/T 21600-2008 | 危險品 包裝氣密試驗方法 | () |
| GB/T 21601-2008 | 危險品 包裝提梁提環強度試驗方法 | () |
| GB/T 21602-2008 | 危險品 大包裝底部提升試驗方法 | () |
| GB/T 21928-2008 | 食品塑料包裝材料中鄰苯二甲酸酯的測定 | Determination of phthalate esters in food plastic packaging materials |
| GB/T 22344-2008 | 包裝用聚酯捆扎帶 | () |
| GB/T 2317.4-2000 | 電力金具驗收規則、標志與包裝 | Acceptance inspection，marking and packing for electric power fittings |
| GB/T 247-1997 | 鋼板和鋼帶檢驗、包裝、標志及質量證明書的一般規定 | General rule of acceptance，package，mark and certification for steel plates(sheets) and strips |
| GB/T 2495-1996 | 普通磨具包裝 | Packing for bonded abrasive products |
| GB/T 3199-2007 | 鋁及鋁合金加工產品包裝、標志、運輸、貯存 | Wrought aluminium and aluminium alloy products - Packing,marking,transporting and storing |
| GB/T 325.1-2008 | 包裝容器 鋼桶 第1部分：通用技術要求 | () |
| GB/T 3302-1982 | 日用陶瓷器驗收、包裝、標志、運輸、儲存規則 | Rule of acceptance， pack，mark， transport and reserve for domestic ceramic ware |
| GB/T 3390.5-2004 | 手動套筒扳手檢驗規則、包裝與標志 | Hand operated socket wrenches--Inspection，packaging and marking |
| GB/T 3650-2008 | 鐵合金驗收、包裝、儲運、標志和質量證明書的一般規定 | () |
| GB/T 3873-1983 | 通信設備產品包裝通用技術條件 | General specifications for products packaging of communication equipments |
| GB/T 4122.1-2008 | 包裝術語 第1部分：基礎 | Packaging terms - Part 1：Basic |
| GB/T 4122.2-1996 | 包裝術語機械 | Packaging terms--Machinery |
| GB/T 4122.3-1997 | 包裝術語防護 | Packaging terms--Protection |
| GB/T 4122.4-2002 | 包裝術語木容器 | Packaging terms--Wooden containers |
| GB/T 4122.5-2002 | 包裝術語檢驗與試驗 | Packaging terms--Inspection and tests |
| GB/T 4414-1984 | 包裝鎢精礦取樣、制樣方法 | Methods of sampling and sample preparation oftungsten concentrates in bags |
| GB/T 4456-1996 | 包裝用聚乙烯吹塑薄膜 | Polyethylene blown film for packaging |
| GB/T 4768-2008 | 防霉包裝 | () |
| GB/T 4856-1993 | 針棉織品包裝 | Package of cotton goods and kintwear |
| GB/T 4857.1-1992 | 包裝運輸包裝件試驗時各部位的標示方法 | Packaging--Complete，filled transport packages--Identification of parts when testing |
| GB/T 4857.10-2005 | 包裝運輸包裝件基本試驗第10部分:正弦變頻振動試驗方法 | Packaging-Basic tests for transport packages-Part 10:Sinusoidal vibration test method using at variable vibration frequency |
| GB/T 4857.11-2005 | 包裝運輸包裝件基本試驗第11部分:水平?jīng)_擊試驗方法 | Packaging-Basic tests for transport packages-Part 11:Horizontal impact test methods |
| GB/T 4857.12-1992 | 包裝運輸包裝件浸水試驗方法 | Packaging--Transport packages--Water immersion test method |
| GB/T 4857.13-2005 | 包裝運輸包裝件基本試驗第13部分:低氣壓試驗方法 | Packaging-Basic tests for transport packages-Part 13:Low pressure test |
| GB/T 4857.14-1999 | 包裝運輸包裝件傾翻試驗方法 | Packaging--Transport packages--Topplingtest method |
| GB/T 4857.15-1999 | 包裝運輸包裝件可控水平?jīng)_擊試驗方法 | Packaging--Transport packages--Controlled horizontal impack test method |
| GB/T 4857.17-1992 | 包裝運輸包裝件編制性能試驗大綱的一般原理 | Packaging--Transport packages--General principles for the compilation of performance test schedules |
| GB/T 4857.18-1992 | 包裝運輸包裝件編制性能試驗大綱的定量數據 | Packaging--Transport packages--Quantitative data for the compilation of performance test schedules |
| GB/T 4857.19-1992 | 包裝運輸包裝件流通試驗信息記錄 | Packaging--Transport packages--Information to be recorded in distribution trials |
| GB/T 4857.2-2005 | 包裝運輸包裝件基本試驗第2部分:溫濕度調節處理 | Packaging-Basic tests for transport packages-Part 2:Temperature and humidity conditioning |
| GB/T 4857.20-1992 | 包裝運輸包裝件碰撞試驗方法 | Packaging--Transport packages--Bump test method |
| GB/T 4857.22-1998 | 包裝運輸包裝件單元貨物穩定性試驗方法 | Packaging--Transport packages--Unit loads stability test methods |
| GB/T 4857.23-2003 | 包裝運輸包裝件隨機振動試驗方法 | Packaging--Transport packages--Random vibration test method |
| GB/T 4857.3-2008 | 包裝 運輸包裝件基本試驗 第3部分：靜載荷堆碼試驗方法 | Packaging - Basic tests for transport packages - Part 3：Stacking test methods using a static load |
| GB/T 4857.4-2008 | 包裝 運輸包裝件基本試驗 第4部分：采用壓力試驗機進行的抗壓和堆碼試驗方法 | Packaging - Basic tests for transport packages - Part 4：Compression and Stacking tests using a compression tester |
| GB/T 4857.5-1992 | 包裝運輸包裝件跌落試驗方法 | Packaging--Transport packages--Verticalimpact test method by dropping |
| GB/T 4857.6-1992 | 包裝運輸包裝件滾動試驗方法 | Packaging--Transport packages--Rolling test method |
| GB/T 4857.7-2005 | 包裝運輸包裝件基本試驗第7部分:正弦定頻振動試驗方法 | Packaging-Basic tests for transport packages-Part 7:Sinusoidal vibration test method at constant frequency |
| GB/T 4857.9-2008 | 包裝 運輸包裝件基本試驗 第9部分：噴淋試驗方法 | Packaging - Basic tests for transport packages - Part 9：Water spray test |
| GB/T 4879-1999 | 防銹包裝 | Rustproof packaging |
| GB/T 4892-2008 | 硬質直方體運輸包裝尺寸系列 | () |
| GB/T 5009.100-2003 | 食品包裝用發泡聚苯乙烯成型品衛生標準的分析方法 | Method for analysis of hygienic standard of products of foamed polystyrene for food packaging |
| GB/T 5009.101-2003 | 食品容器及包裝材料用聚酯樹脂及其成型品中銻的測定 | Determination of antimony in polyester resin and products for food containers and packaging materials |
| GB/T 5009.119-2003 | 復合食品包裝袋中二氨基甲苯的測定 | Determination of diaminomethylbezen of complex for food packaging material |
| GB/T 5009.122-2003 | 食品容器、包裝材料用聚氯乙烯樹脂及成型品中殘留1，1-二氯乙烷的測定 | Determination of residual ethylidene dichloride in polyvinyl chloride resin and product for food container and packaging material |
| GB/T 5009.127-2003 | 食品包裝用聚酯樹脂及其成型品中鍺的測定 | Determination of germanium in polyester resin and products for food packaging |
| GB/T 5009.152-2003 | 食品包裝用苯乙烯-丙烯腈共聚物和橡膠改性的丙烯腈-丁二烯-苯乙烯樹脂及其成型品中殘留丙烯腈單體的測定 | Determination of residual acrylonitrile monomer in styrene-acrylonitrile copolymers and rubber-modified acrylonitrile-butadiene-styrene resins and their products used for food packaging |
| GB/T 5009.156-2003 | 食品用包裝材料及其制品的浸泡試驗方法通則 | General principle for the determination of migration of packaging materials and their products |
| GB/T 5009.166-2003 | 食品包裝用樹脂及其制品的預試驗 | Preliminary test of resin and it’s products used as food packaging materials |
| GB/T 5009.178-2003 | 食品包裝材料中甲醛的測定 | Determination of formaldehyde for food packaging material |
| GB/T 5009.58-2003 | 食品包裝用聚乙烯樹脂衛生標準的分析方法 | Method for analysis of hygienicstandard of polyethylene resin for food packaging |
| GB/T 5009.59-2003 | 食品包裝用聚苯乙烯樹脂衛生標準的分析方法 | Method for analysis of hygienic standard of polystyrene resin for food packaging |
| GB/T 5009.60-2003 | 食品包裝用聚乙烯、聚苯乙烯、聚丙烯成型品衛生標準的分析方法 | Method for analysis of hygienic standard of products of polyethylene，polystyrene and polypropyrene for food packaging |
| GB/T 5009.61-2003 | 食品包裝用三聚氰胺成型品衛生標準的分析方法 | Method for analysis of hygienic standard of products of tripolycyanamide for food packaging |
| GB/T 5009.67-2003 | 食品包裝用聚氯乙烯成型品衛生標準的分析方法 | Method for analysis of hygienic standard of products of polyvinyl chloride for food packaging |
| GB/T 5009.71-2003 | 食品包裝用聚丙烯樹脂衛生標準的分析方法 | Method for analysis of hygienicstandard of polypropyrene resin for food packaging |
| GB/T 5009.78-2003 | 食品包裝用原紙衛生標準的分析方法 | Method for analysis of hygienic standard of papers for food packaging |
| GB/T 5009.98-2003 | 食品容器及包裝材料用不飽和聚酯樹脂及其玻璃鋼制品衛生標準的分析方法 | Method for analysis of hygienic standard of unsatur-ated polyester resin and glass fibre reinforced plastics used as food containers and packaging materials |
| GB/T 5009.99-2003 | 食品容器及包裝材料用聚碳酸酯樹脂衛生標準的分析方法 | Method for analysisof hygienic standard of polycarbonate resin used as food containers and packaging materials |
| GB/T 5048-1999 | 防潮包裝 | Moistureproof packaging |
| GB/T 5243-2006 | 硬質合金制品的標志、包裝、運輸和貯存 | Marking,packing,transport and storage of cemented carbide products |
| GB/T 5305-1985 | 手工具包裝、標志、運輸與貯存 | Packaging，marking，transportation and storage of hand tools |
| GB/T 5398-1999 | 大型運輸包裝件試驗方法 | Test methods for large transport packages |
| GB/T 5721-1993 | 橡膠密封制品標志、包裝、運輸、貯存的一般規定 | General rules of identification，packaging，transportation and storage for rubber sealing products |
| GB/T 5991.2-2000 | 香料煙包裝、標志與貯運 | Aromatic tobacco--Packing，marking，storage and transport |
| GB/T 6159.4-2003 | 縮微攝影技術詞匯第4部分: 材料和包裝物 | Micrographics--Vocabulary--Part 4: Materials and packaging |
| GB/T 6388-1986 | 運輸包裝收發貨標志 | Transport package shipping mark |
| GB/T 6543-2008 | 運輸包裝用單瓦楞紙箱和雙瓦楞紙箱 | () |
| GB/T 6867-1986 | 園藝工具檢驗規則、標志與包裝 | Rules of inspection，marking and packaging for garden tools |
| GB/T 6981-2003 | 硬包裝容器透濕度試驗方法 | Test methods for water vapor transmission of rigid containers |
| GB/T 6982-2003 | 軟包裝容器透濕度試驗方法 | Test methods for water vapor permeability of flexible containers |
| GB/T 7311-2008 | 包裝機械分類與型號編制方法 | () |
| GB/T 7350-1999 | 防水包裝 | Waterproof packaging |
| GB/T 7414-1987 | 主要農作物種子包裝 | Seed packing of main agricultural crops |
| GB/T 8082-2008 | 天然生膠 標準橡膠 包裝、標志、貯存和運輸 | () |
| GB/T 8166-1987 | 緩沖包裝設計方法 | Package cushioning design method |
| GB/T 8167-2008 | 包裝用緩沖材料動態壓縮試驗方法 | () |
| GB/T 8168-2008 | 包裝用緩沖材料靜態壓縮試驗方法 | Testing method of static compression for packaging cushioning materials |
| GB/T 8169-2008 | 包裝用緩沖材料振動傳遞特性試驗方法 | Testing method of vibration transmissibility for packaging cushioning materials |
| GB/T 8171-2008 | 使用緩沖包裝材料進行的產品機械沖擊脆值試驗方法 | () |
| GB/T 8180-2007 | 鈦及鈦合金加工產品的包裝、標志、運輸和貯存 | Wrought titanium and titanium alloy products packing, marking, transporting and storing |
| GB/T 8597-2003 | 滾動軸承防銹包裝 | Rolling bearings--Rust proof packaging |
| GB/T 8719-1997 | 炭素材料及其制品的包裝、標志、儲存、運輸和質量證明書的一般規定 | Generalrule for packing， marking， storage， transport and quality certificates of carbon material and products |
| GB/T 8888-2003 | 重有色金屬加工產品的包裝、標志、運輸和貯存 | Wrought heavy non-ferrous metal products--Packing，marking，transporting and storing |
| GB/T 90.2-2002 | 緊固件標志與包裝 | Fasteners--Marking and packaging |
| GB/T 9106-2001 | 包裝容器鋁易開蓋兩片罐 | Packaging containers--Aluminium easy open endand two-piece can |
| GB/T 9174-2008 | 一般貨物運輸包裝通用技術條件 | () |
| GB/T 9177-2004 | 真空、真空充氣包裝機通用技術條件 | Vacuum packaging machine and vacuum-gas flushing packaging machine |
| GB/T 9229-1988 | 放射性物質包裝的內容物和輻射的泄漏檢驗 | Radioactive materials--Packagings--Tests for contents leakage and radiation leakage |
| GB/T 9577-2001 | 橡膠和塑料軟管及軟管組合件標志、包裝和運輸規則 | Rubber and plastics hose and hose assemblies--Rules for marking，package and transportation |
| GB/T 9750-1998 | 涂料產品包裝標志 | Marks for package of coating products |
| GB/T 9846.6-2004 | 膠合板第6部分:普通膠合板標志、標簽和包裝 | Plywood--Part 6:Marking，tag，packaging of plywood for general use |
| HG/T 2042-1991 | 純堿包裝機技術條件 | () |
| HG/T 2403-2007 | 膠鞋檢驗規則、標志、包裝、運輸、貯存 | Test rule、marking、packing、transport、storage for rubber shoes |
| HG/T 2457-1993 | 顏料產品檢驗、標志、包裝、運輸和貯存通則 | () |
| HG/T 2823-1997(2007) | 一氟三氯甲烷包裝鋼桶 | () |
| HG/T 3075-2003 | 膠粘劑產品包裝、標志、運輸和貯存的規定 | () |
| HG/T 3155-1985 | 化工機械配件包裝技術條件 | () |
| JB 20023-2004 | 鋁塑泡罩包裝機 | () |
| JB 7233-1994 | 包裝機械 安全要求 | () |
| JB/T 10169-2000 | 藥品泡罩包裝機 | () |
| JB/T 10190-2000 | 滾動軸承 包裝用塑料筒 | () |
| JB/T 10641-2006 | 軟雙鋁包裝機 | Double-aluminum packaging machine |
| JB/T 10797-2007 | 給袋式自動包裝機 | Automatic bag filling and sealing machine |
| JB/T 10798-2007 | 貼體包裝機 | Skin packaging machine |
| JB/T 1615-1991(2006年確認) | 鍋爐油漆和包裝技術條件 | () |
| JB/T 20055-2005 | 藥品透明膜包裝機 | Pharmaccutical transparent film for packet |
| JB/T 2647-1995 | 帶式輸送機 包裝技術條件 | () |
| JB/T 2862-1992 | 汽輪機包裝 技術條件 | () |
| JB/T 3016-2004 | 滾動軸承包裝箱技術條件 | () |
| JB/T 3034-1993 | 滾動軸承 油封防銹包裝 | () |
| JB/T 3085-1999 | 電力傳動控制裝置的產品包裝與運輸規程 | () |
| JB/T 3207-2005 | 機床附件 產品包裝通用技術條件 | () |
| JB/T 3625-1999 | 組合夾具元件 防銹包裝技術條件 | () |
| JB/T 4033.1-1999 | 電纜設備通用部件 繞包裝置 第1部分:基本技術要求 | () |
| JB/T 4033.2-1999 | 電纜設備通用部件 繞包裝置 第2部分:紙帶繞包裝置 | () |
| JB/T 4033.3-1999 | 電纜設備通用部件 繞包裝置 第3部分:鋼帶繞包裝置 | () |
| JB/T 4033.4-1999 | 電纜設備通用部件 繞包裝置 第4部分:布帶繞包裝置 | () |
| JB/T 4033.5-1999 | 電纜設備通用部件 繞包裝置 第5部分:繞包變速箱 | () |
| JB/T 4711-2003 | 壓力容器涂敷與運輸包裝 | () |
| JB/T 5000.13-2007 | 重型機械通用技術條件 第13部分：包裝 | Heavy mechanical general techniques and standards-Part 13:Packing |
| JB/T 5660-1991 | 電器附件、家用和類似用途的控制器、保護器的包裝和標志 | () |
| JB/T 5908-2007 | 電除塵器 主要件抽樣檢驗及包裝運輸貯存規范 | () |
| JB/T 5947-1991 | 工程機械 包裝通用技術條件 | () |
| JB/T 5992.9-1992 | 機械制造工藝方法分類與代碼 裝配與包裝 | () |
| JB/T 6147-2007 | 試驗機包裝、包裝標志、儲運 技術要求 | () |
| JB/T 6444-2004 | 風機包裝 通用技術條件 | () |
| JB/T 6564-1993 | 出口機床竹膠合板包裝箱 | () |
| JB/T 6569-2006 | 普通磨料 包裝 | Conventional abrasive-Packing |
| JB/T 7148-2007 | 出口履帶式工程機械 防銹和包裝 | Export crawler construction machinery-Rust proofing and packaging |
| JB/T 7232-1994 | 包裝機械 噪聲聲功率級的測定 簡易法 | () |
| JB/T 7302-2006 | 鑿巖機械與氣動工具 產品包裝通用技術條件 | Rock drilling machines and pneumatic tools-General specifications for packing of procducts |
| JB/T 7407-2008 | 包裝件跌落試驗機 技術條件 | () |
| JB/T 7539-1994 | 機電產品包裝檢驗規程導則 | () |
| JB/T 7545-1994 | 烘道式收縮包裝機 技術條件 | () |
| JB/T 7547-1994 | 包裝用高密度聚乙烯超薄薄膜吹塑機組 | () |
| JB/T 7587-1994 | 電動工具 產品包裝技術條件 | () |
| JB/T 7613-1994 | 電力電容器 產品包裝通用技術條件 | () |
| JB/T 7663.1-2005 | 容積式壓縮機 包裝技術條件 | () |
| JB/T 7828-1995 | 繼電器及其裝置包裝貯運技術條件 | () |
| JB/T 7988.3-2001 | 超硬磨料 標志和包裝 | () |
| JB/T 8135.1-1997 | 繞組線包裝第1部分:圓繞組線線桶 | () |
| JB/T 8135.10-1997 | 繞組線包裝第4部分:試驗方法第1節:熱塑性材料交貨線盤 | () |
| JB/T 8135.11-1997 | 繞組線包裝第4部分:試驗方法第2節:圓錐形交貨線盤用熱塑性材料容器 | () |
| JB/T 8135.2-1997 | 繞組線包裝第2部分:圓柱形交貨線盤第1節:基本尺寸 | () |
| JB/T 8135.3-1997 | 繞組線包裝第2部分:圓柱形交貨線盤第2節:熱塑性材料可回收線盤 | () |
| JB/T 8135.4-1997 | 繞組線包裝第2部分:圓柱形交貨線盤第3節:熱塑性材料非回收線盤 | () |
| JB/T 8135.5-1997 | 繞組線包裝第3部分:圓錐形交貨線盤第1節:基本尺寸 | () |
| JB/T 8135.6-1997 | 繞組線包裝第3部分:圓錐形交貨線盤第2節:熱塑性材料可回收線盤 | () |
| JB/T 8135.7-1997 | 繞組線包裝第3部分:圓錐形交貨線盤第3節:熱塑性材料非回收線盤 | () |
| JB/T 8135.8-1997 | 繞組線包裝第3部分:圓錐形交貨線盤第4節:圓錐形交貨線盤用容器的基本尺寸 | () |
| JB/T 8135.9-1997 | 繞組線包裝第3部分:圓錐形交貨線盤第5節:熱塑性材料線盤容器 | () |
| JB/T 8162-1999 | 控制微電機 包裝技術條件 | () |
| JB/T 8250.7-1999 | 照相機械 包裝、運輸、貯存條件及試驗方法 | () |
| JB/T 8356.1-1996 | 機床包裝 技術條件 | () |
| JB/T 8356.2-1996 | 機床包裝箱 | () |
| JB/T 8356.3-1996 | 機床包裝用中小木箱 | () |
| JB/T 8660-1997 | 水電機組包裝、運輸和保管規范 | () |
| JB/T 8741-1998 | 燃氣輪機包裝與貯運技術條件 | () |
| JB/T 8827-1999 | 機電產品防震包裝 | () |
| JB/T 9065-1999 | 冷暖通風設備 包裝通用技術條件 | () |
| JB/T 9312-1999 | 光學零件 包裝 | () |
| JB/T 9314-1999 | 大地測量儀器的包裝 | () |
| JB/T 9351-1999 | 電子光學儀器 包裝通用技術條件 | () |
| JB/T 9511-1999 | 天平包裝 技術條件 | () |
| JB/T 9553-1999 | 電氣絕緣用玻璃纖維模塑料 檢驗、標志、包裝、運輸和貯存通用規則 | () |
| JB/T 9673-1999 | 絕緣子 產品包裝 | () |
| JC 534-1994 | 滑石粉包裝袋 | () |
| JC/T 406-2006 | 水泥機械包裝技術條件 | () |
| JC/T 513-1993 | 平板玻璃木箱包裝 | () |
| JC/T 694-2008 | 衛生陶瓷包裝 | () |
| JC/T 818-2007 | 回轉式水泥包裝機 | Roto packer |
| JC/T 957-2005 | 水泥包裝袋跌落試驗機 | () |
| MT/T 150-1997 | 刮板輸送機和轉載機包裝通用技術條件 | () |
| QB 1014-1991 | 食品包裝紙 | () |
| QB 1231-1991 | 液體包裝用聚乙烯吹塑薄膜 | () |
| QB 1733.1-1993(2007) | 花生制品的試驗方法、檢驗規則和標志、包裝、運輸、貯存要求 | () |
| QB 2197-1996 | 榨菜包裝用復合膜、袋 | () |
| QB 2388-1998 | 食品包裝容器用聚氯乙烯粒料 | () |
| QB/T 1015-1991 | 黑色不透光包裝紙 | () |
| QB/T 1123-1991 | 紙-塑不織布復合包裝袋 | () |
| QB/T 1187-1991 | 皮鞋驗收,標志,包裝,運輸和貯存 | () |
| QB/T 1247-1991 | 消毒乳自動軟包裝機 | () |
| QB/T 1251.1-1991 | 自行車包裝 | () |
| QB/T 1264-1991 | 毛皮成品的包裝標志、貯藏和運輸 | () |
| QB/T 1313-1991 | 中性包裝紙 | () |
| QB/T 1474.7-2005 | 繪圖儀尺 術語、檢驗規則、標志、包裝、運輸、貯存 | () |
| QB/T 1588.5-1996 | 輕工機械包裝通用技術條件 | () |
| QB/T 1622.4-1992 | 不銹鋼器皿 標志、包裝、運輸、貯存 | () |
| QB/T 1649-1992 | 聚苯乙烯泡沫塑料包裝材料 | () |
| QB/T 1685-2006 | 化妝品產品包裝外觀要求 | Requirements of packaging appearance for cosmetic products |
| QB/T 1733.1-1993 | 花生制品的試驗方法、檢驗規則、標志、包裝、運輸和貯存要求 | () |
| QB/T 1804-1993 | 工業酶制劑通用檢驗規則和標志、包裝、運輸、貯存 | () |
| QB/T 1877-2007 | 包裝裝潢鍍錫（鉻）薄鋼板印刷品 | Tinplate prints for the packing and decoration |
| QB/T 1878-1993 | 包裝裝潢鍍錫(鉻)薄鋼板制罐產品 | () |
| QB/T 1968-1994 | 感光膠片的包裝標志、貯存及運輸規范 | () |
| QB/T 2185-1995 | 自行車單輛瓦楞紙箱包裝技術條件 | () |
| QB/T 2248-1996 | 枕式糖果包裝機 | () |
| QB/T 2358-1998 | 塑料薄膜包裝袋熱合強度試驗方法 | () |
| QB/T 2461-1999 | 包裝用降解聚乙烯薄膜 | () |
| QB/T 2666-2004 | 雙向拉伸聚丙烯包裝標簽 | () |
| QB/T 2737－2005 | 制酒飲料機械 熱收縮塑膜包裝機 | () |
| QB/T 2802－2006 | 皮革成品的包裝、標志、運輸和保管 | () |
| QB/T 2818-2006 | 聚烯烴注塑包裝桶 | Polyolefine injecting packing bucket |
| QB/T 2952-2008 | 洗滌用品標識和包裝要求 | Requirements for detergent marks and packaging |
| QB/T 3526-1999 | 薄頁包裝紙 | () |
| QB/T 3531-1999 | 液體食品復合軟包裝材料 | () |
| QB/T 3600-1999 | 罐頭食品包裝、標志、運輸和貯存 | () |
| QB/T 3728-1999 | 五號小口保溫瓶包裝 | Packing for No5 narrow mouthed vacuum flask |
| QB/T 3732.3-1999 | 普通陶器 包裝壇類 | () |
| QB/T 3857.3-1999 | 斧的檢驗規則、標志、包裝、運輸與貯存 | Axes,rules of inspection,marking,packaging,transportation and preservation |
| SB/T 10369-2005 | 抽空軟包裝鹵蛋制品 | () |
| SB/T 10370-2005 | 抽空軟包裝鹵豆制品 | () |
| SB/T 10380-2005 | 冷藏包裝豆腐絲、片 | () |
| SB/T 10381-2005 | 抽空軟包裝鹵肉制品 | () |
| SB/T 10448-2007 | 熱帶水果和蔬菜包裝與運輸操作規程 | () |
| SB/T 229-2007 | 食品機械通用技術條件 產品包裝技術要求 | () |
| SH/T 0584-1994(2003) | 防銹油脂包裝貯存試驗法(百葉箱法) | () |
| WB/T 1029-2006 | 裝載單元和運輸包裝的條碼符號 | Bar code symbols for unit load and transport packages |
| YB/T 025-2002 | 包裝用鋼帶 | () |
| YB/T 036.21-1992(2005) | 冶金設備制造通用技術條件 包裝 | () |
| YB/T 083-1996(2006年確認) | 冶金標準樣品包裝、運輸及儲存技術規范 | () |
| YB/T 3220.4-1987(2005) | 寶鋼二高爐設備制造通用技術條件 包裝 | () |
| YB/T 5056-1993(2005) | 鋼釘檢驗、包裝、標志、質量證明書及貯運的一般規定 | () |
| YB/T 5142-2005 | 冶金礦產品包裝、標志、運輸、貯存和質量證明書 | () |
| YB/T 5242-1993(2005) | 精密合金包裝、標志和質量證明書的一般規定 | () |
| YS/T 28-1992(2005) | 硅片包裝 | () |
| YS/T 418-1999(2005) | 有色金屬精礦產品、包裝、標志、運輸和貯存 | () |
| 編號 | 中文名稱 | 英文名稱 |