| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 1070-1993 | 黑漆(焦油漆)規范 | Specification for black paint (tar-based) |
| BS 2992-1970 | 當局機構和公共機關油漆工和裝飾工用刷子(填料質量除外)規范 | Specification for painters' and decorators' brushes for local authorities and public institutions (excluding quality of fillings) |
| BS 2X 32-1998 | 航空航天用預處理蝕刻油漆膩?zhàn)拥囊?guī)范 | Specification for pre-treatment etch primer for aerospace purposes |
| BS 3900-0-2010 | 油漆的試驗方法.試驗方法索引 | Methods of test for paints - Index of test methods |
| BS 3900-A23-2000 | 油漆和清漆.揮發性有機化合物（VOC）含量的測定.差值法 | Paints and varnishes. Determination of volatile organic compound (VOC) content. Difference method |
| BS 4479-4-1990 | 層覆物品設計.第4部分:油漆和清漆覆層推薦標準 | Design of articles that are to be coated - Recommendations for paint coatings and varnish coatings |
| BS 7079-D2-2000 | 涂油漆和有關產品前鋼基底預處理.表面處理方法.噴砂清潔.第2部分:噴砂清潔 | Preparation of steel substrates before application of paints and related products. Surface preparation methods. Abrasive blast cleaning. Part 2: Abrasive blast cleaning |
| BS DD ENV 12837-2000 | 油漆和清漆.采用保護涂料系統作鋼結構防腐蝕保護措施其檢驗人員的資格 | Paints and varnishes - Qualification of inspectors for corrosion protection of steel structures by protective paint systems |
| BS EN 1062-11-2002 | 油漆和清漆.外部磚石建筑和混凝土用覆層材料和涂覆系統.試驗前的狀態調節方法 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Methods of conditioning before testing |
| BS EN 1062-6-2002 | 油漆和清漆.外部磚石建筑和混凝土用覆層材料和涂覆系統.測定二氧化碳的滲透率 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Determination of carbon dioxide permeability |
| BS EN 23270-1991 | 油漆、清漆及其原料的調節和試驗溫度和濕度規范 | Specification for temperatures and humidities for conditioning and testing paints, varnishes and their raw materials |
| BS EN 2434-004-2010 | 航空航天系列.油漆和清漆.雙組分冷固化聚氨酯精飾.高靈活性 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. High flexibility |
| BS EN 2436-001-2006 | 航空航天系列.油漆和清漆.不含鉻酸鹽的耐腐蝕雙組分冷固化底漆.第001部分:基本要求 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 001: Basic requirements |
| BS EN ISO 11126-10-2000 | 涂裝油漆和有關產品前鋼材預處理.噴射清理用非金屬磨料規范.鐵鋁石榴石 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Almandite garnet |
| BS EN ISO 11126-9-1999 | 涂裝油漆和有關產品前鋼襯底預處理.噴射清理用非金屬磨料的規范.十字石 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Staurolite |
| BS EN ISO 1513-2010 | 油漆和清漆試驗樣品的檢驗和制備 | Paints and varnishes - Examination and preparation of test samples |
| BS EN ISO 1519-2011 | 油漆和清漆.彎曲試驗(圓柱軸) | Paints and varnishes. Bend test (cylindrical mandrel) |
| BS EN ISO 3262-14-2000 | 油漆調和料.規范和試驗方法.白硅石 | Extenders for paints - Specifications and methods of test - Cristobalite |
| BS EN ISO 3262-16-2000 | 油漆調和料.規范和試驗方法.氫氧化鋁 | Extenders for paints - Specifications and methods of test - Aluminium hydroxides |
| BS EN ISO 4618-2006 | 油漆和清漆.術語和定義 | Paints and varnishes - Terms and definitions |
| BS EN ISO 4623-1-2002 | 油漆和清漆.耐絲狀腐蝕性能的測定.鋼基質 | Paints and varnishes - Determination of resistance to filiform corrosion - Steel substrates |
| BS EN ISO 7783-2-1999 | 油漆和清漆.外部磚石工程和混凝土用涂覆材料和涂覆系統.水蒸氣滲透率的測定和分類 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Determination and classification of water-vapour transmission rate (permeability) |
| BS EN ISO 8501-2-1996 | 涂油漆和有關產品前鋼基底預處理.表面清潔度的目視評定.局部去除原有涂層后鋼基底的處理等級 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Preparation grades of previously coated steel substrates after localized removal of previous coatings |
| BS EN ISO 8502-2-2005 | 涂裝油漆和相關產品前鋼材的預處理.表面清潔度的評定試驗.實驗室測定清潔表面上氯化物 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Laboratory determination of chloride on cleaned surfaces |
| BS EN ISO 8502-6-2006 | 用油漆和相關產品前的鋼襯底預處理.表面清潔度評定試驗.提取分析用可溶性雜質.Bresle法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Extraction of soluble contaminants for analysis - The Bresle method |
| BS ISO 15741-2002 | 油漆和清漆.岸上和近海鋪設的無腐蝕氣體鋼管道內側的減小摩擦涂層 | Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases |
| BS ISO 8503-5-2003 | 涂裝油漆和有關產品前鋼材預處理.噴射清理鋼材的表面粗糙度特性.表面輪廓測定的復制帶法 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Replica tape method for the determination of the surface profile |
| 編號 | 中文名稱 | 英文名稱 |