| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ISO 11124-1-1993 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第1部分:一般介紹及分類 | Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 1: general introduction and classification |
| ISO 11124-2-1993 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第2部分:冷硬鑄鐵丸 | Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 2: chilled-iron grit |
| ISO 11124-3-1993 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第3部分:高碳鑄鋼丸和砂 | Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 3: high-carbon cast-steel shot and grit |
| ISO 11124-4-1993 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第4部分:低碳鑄鋼丸 | Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 4: low-carbon cast-steel shot |
| ISO 11125-1-1993 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第1部分:抽樣 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 1: sampling |
| ISO 11125-2-1993 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第2部分:顆粒尺寸分布的測定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 2: determination of particle size distribution |
| ISO 11125-3-1993 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第3部分:硬度測定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 3: determination of hardness |
| ISO 11125-4-1993 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第4部分:表觀密度測定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 4: determination of apparent density |
| ISO 11125-5-1993 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第5部分:缺陷顆粒的百分比和微結構的測定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 5: determination of percentage defective particles and of microstructure |
| ISO 11125-6-1993 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第6部分:外來雜質測定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 6: determination of foreign matter |
| ISO 11125-7-1993 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第7部分:含水量測定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 7: determination of moisture |
| ISO 11126-1 Technical Corrigendum 1-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第1部分:總體介紹和分類 技術勘誤1 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification; Technical Corrigendum 1 |
| ISO 11126-1 Technical Corrigendum 2-1997 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第1部分:總體介紹和分類 技術勘誤2 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification; Technical Corrigendum 2 |
| ISO 11126-1-1993 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第1部分:總體介紹和分類 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 1: general introduction and classification |
| ISO 11126-10-2000 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第10部分:鐵鉛石榴石 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garne |
| ISO 11126-3-1993 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第3部分:銅精煉渣 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 3: copper refinery slag |
| ISO 11126-4-1993 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第4部分:煤爐渣 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 4: coal furnace slag |
| ISO 11126-5-1993 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第5部分:鎳精煉渣 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 5: nickel refinery slag |
| ISO 11126-6-1993 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第6部分:煉鐵爐渣 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 6: iron furnace slag |
| ISO 11126-7 Technical Corrigendum 1-1999 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第7部分:熔融氧化鋁 技術勘誤1 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide; Technical Corrigendum 1 |
| ISO 11126-7-1995 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第7部分:熔融氧化鋁 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide |
| ISO 11126-8-1993 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第8部分:橄欖石砂 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 8: olivine sand |
| ISO 11126-9-1999 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第9部分:十字石 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite |
| ISO 11127-1-1993 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第1部分:抽樣 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 1: sampling |
| ISO 11127-2-1993 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第2部分:顆粒尺寸分布的測定 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 2: determination of particle size distribution |
| ISO 11127-3-1993 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第3部分:表觀密度測定 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 3: determination of apparent density |
| ISO 11127-4-1993 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第4部分:通過玻璃載片試驗評定硬度 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 4: assessment of hardness by a glass slide test |
| ISO 11127-5-1993 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第5部分:含水量測定 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 5: determination of moisture |
| ISO 11127-6-1993 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第6部分:通過測量電導率測定水溶性雜質 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 6: determination of water-soluble contaminants by conductivity measurement |
| ISO 11127-7-1993 | 涂裝油漆和有關產品前鋼材預處理 非金屬噴沙清理磨料的試驗方法 第7部分:水溶性氯化物的測定 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 7: determination of water-soluble chlorides |
| ISO 16773-2-2007 | 油漆及清漆.高阻抗涂層試樣的電化學阻抗譜(EIS).第2部分:數據采集 | Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 2: Collection of data |
| ISO 16773-3-2009 | 油漆和清漆.高阻抗涂層試樣的電化學阻抗譜(EIS).第3部分:虛擬單元樣本數據的加工和分析 | Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 3: Processing and analysis of data from dummy cells |
| ISO 16773-4-2009 | 油漆及清漆.高阻抗涂層試樣的電化學阻抗譜(EIS).第4部分:聚合物涂覆試樣的光譜示例 | Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 4: Examples of spectra of polymer-coated specimens |
| ISO 28199-1-2009 | 油漆和清漆.有關應用工序過程的涂料系統性能評估.第1部分:相關詞匯和試驗盤的制備 | Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 1: Relevant vocabulary and preparation of test panels |
| ISO 28199-2-2009 | 油漆和清漆.與應用過程相關的涂層系統性能評估.第2部分:顏色的穩定性,工序的遮蓋力,重新溶解,噴涂吸收,濕潤 | Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling |
| ISO 28199-3-2009 | 油漆和清漆.與應用過程相關的涂層系統性能評估.第3部分:針孔和遮蓋力,氣泡形成,槽沉的目視評定 | Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 3: Visual assessment of sagging, formation of bubbles, pinholing and hiding power |
| ISO 8501-2-1994 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的目視評定 第2部分:局部去除原有涂層后鋼材的除銹等級 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings |
| ISO 8501-3-2006 | 涂裝油漆和有關產品前鋼材的預處理.表面清潔度的目視評定.第3部分:焊接、切邊及其它表面缺陷區域的處理等級 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections |
| ISO 8502-11-2006 | 涂裝油漆和有關產品前鋼材預處理.表面清潔度的評定試驗.第11部分:水溶性硫酸鹽濁度測定的現場方法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate |
| ISO 8502-2-2005 | 涂覆油漆和相關產品前鋼材襯底的預處理.表面清潔度的評定試驗.第2部分:潔凈表面氯化物的測定 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces |
| ISO 8502-3-1992 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第3部分:油漆前預處理后的鋼材表面上的灰塵評定(壓 | Preparation of steel substrates before application of paint and related products; tests for the assessment of surface cleanliness; part 3: assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
| ISO 8502-4-1993 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第4部分:油覆前凝露可能性的評定導則 | Preparation of steel substrates before application of paint and related products; tests for the assessment of surface cleanliness; part 4: Guidance on the estimation of the probability of condensation prior to paint application |
| ISO 8502-5-1998 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第5部分:涂裝前鋼材表面上氯化物測定(離子探測管法) | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) |
| ISO 8502-6-2006 | 涂覆油漆和相關產品前鋼材的預處理.表面清潔度的評定試驗.第6部分:提取分析用可溶性雜質.Bresle法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method |
| ISO 8502-8-2001 | 涂裝油漆和有關產品前鋼材的預處理 表面清潔度評定試驗 第8部分：現場水分折射測定方法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the refractometric determination of moisture |
| ISO 8502-9-1998 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第9部分:水溶性鹽的現場電導測定法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts |
| ISO 8503-1-1988 | 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第1部分:磨料噴射清理表面粗糙度的ISO評定 | Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 1: specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
| ISO 8503-2-1988 | 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第2部分:磨料噴射清理表面的粗糙度定級方法 | Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 2: method for the grading of surface profile of abrasive blast-cleaned steel; comparator procedure |
| ISO 8503-3-1988 | 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第3部分:ISO表面輪廓比較儀的校準方法和表 | Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 3: method for the calibration of ISO surface profile comparators and for the determination of surface profile; focusing microscope procedure |
| ISO 8503-4-1988 | 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第4部分:ISO表面輪廓比較儀的校準方法和表 | Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 4: method for the calibration of ISO surface profile comparators and for the determination of surface profile; stylus instrument procedure |
| ISO 8503-5-2003 | 涂裝油漆和有關產品前鋼材預處理.噴射清理鋼材的表面粗糙度特性.第5部分:表面輪廓測定的復制帶法 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile |
| ISO 8504-1-2000 | 涂裝油漆和有關產品前鋼材預處理 表面預處理方法 第1部分:總則 | Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles |
| ISO 8504-2-2000 | 涂裝油漆和有關產品前鋼材預處理.表面預處理方法.第2部分:磨料噴射清理 | Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning |
| ISO 8504-3-1993 | 涂裝油漆和有關產品前鋼材預處理 表面預處理方法 第3部分:手工和動力工具清洗 | Preparation of steel substrates before application of paints and related products; surface preparation methods; part 3: hand- and power-tool cleaning |
| ISO 9117-1-2009 | 油漆和清漆.干燥試驗.第1部分:穿透干燥狀態和穿透干燥時間 | Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time |
| ISO/TR 15235-2001 | 涂裝油漆和有關產品前鋼材的預處理 收集的有關溶水鹽污染水平的影響的信息 | Preparation of steel substrates before application of paints and related products - Collected information on the effect of levels of water-soluble salt contamination |
| 編號 | 中文名稱 | 英文名稱 |