| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI 124.1.2-2005 | 塑料浴盆和淋浴裝置用美國國家標準 | American National Standardfor Plastic Bathtub and Shower Units |
| ANSI A14.5-2007 | 梯子.便攜式增強塑料.安全要求 | Ladders – Portable Reinforced Plastic – Safety Requirements |
| ANSI FM4880-2001 | 評估標準.A)絕緣墻或墻壁和天花板或屋頂構件.B)塑料內部終飾材料.C)塑料外部建筑面板.D)墻壁或天花板涂覆系 | Standard for Evaluating A) Insulated Wall or Wall & Roof/Ceiling Assemblies; B) Plastic Interior Finish Materials; C) Plastic Exterior Building Panels; D) Wall/Ceiling Coating Systems; E) Interior or Exterior Finish Systems |
| ANSI IAPMOZ 124.4-2006 | 塑料抽水馬桶和罐 | Plastic Water Closet Bowls and Tanks |
| ANSI Z124.3-2005 | 塑料洗臉盆用美國國家標準 | American National Standardfor Plastic Lavatories |
| ANSI Z124.4-2006 | 塑料抽水馬桶和水箱用美國國家標準 | American National Standardfor Plastic Water Closet Bowls and Tanks |
| ANSI Z124.7-1997 | 預制塑料殼 | Prefabricated plastic spa shells |
| ANSI Z124.9-2004 | 塑料小便器用美國國家標準 | American National Standardfor Plastic Urinal Fixtures |
| ANSI/AGMA 1006-A-1997 | 塑料齒輪的齒輪齒比例 | Tooth Proportions for Plastic Gears |
| ANSI/AGMA 1106-A-1997 | 塑料齒輪的齒輪齒比例 | Tooth Proportions for Plastic Gears (Metric Edition) |
| ANSI/ASABE S596-2006 | 回收農藥和相關產品用塑料箱 | Recycling Plastic Containers from Pesticides and Pesticide-Related Products |
| ANSI/ASAE S376.2-1998 | 地下熱塑性塑料灌溉管道的設計、安裝和性能 | Design, Installation, and Performance of Underground Thermoplastic Irrigation Pipelines |
| ANSI/ASME A112.4.3-1999 | 用于連接公廁排水系統盥洗室的塑料配件 | Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System |
| ANSI/ASME A112.4.3M-1999 | 用于公廁排水系統盥洗室套管的塑料配件 | Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System |
| ANSI/ASME A112.6.7-2001 | 瓷漆和環氧涂覆的鑄鐵和PVC塑料衛生底板污水池 | Enameled and Epoxy Coated Cast Iron and PVC Plastic Sanitary Floor Sinks |
| ANSI/ASME RTP-1-2007 | 增強型熱固性塑料防腐設備 | Reinforced Thermoset Plastic Corrosion Resistant Equipment |
| ANSI/ASTM B793-2001 | 塑料注模和壓模鑄造鋅鑄造合金錠規范 | Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds |
| ANSI/ASTM C582-2009 | 耐腐蝕設備用接觸模壓增強熱固塑料層壓材料的規范 | Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment |
| ANSI/ASTM D1045-1995 | 塑料取樣方法與使用的試驗增塑劑(08.01) | Methods of Sampling and Test Plasticizers used in Plastics (08.01) |
| ANSI/ASTM D1203-1994 | 采用活性碳方法測定塑料揮發損失的方法 | Test Method for Volatile Loss from Plastics Using Activated Carbon Methods (08.01) |
| ANSI/ASTM D1494-2001 | 增強塑料板的散射光傳遞因數用試驗方法 | Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels |
| ANSI/ASTM D1499-1999 | 塑料曝光用光水曝露裝置(碳弧型)的操作規程(08.01) | Practice for Operating Light-and Water-Exposure Apparatus (Carbon-Arc Type) for Exposure of Plastics (08.01) |
| ANSI/ASTM D1527-2005 | 丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料管材范.表40和80 | Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 |
| ANSI/ASTM D1562-1996 | 塑料泡沫丙酸鹽模鑄擠壓物規范 | Specification for Cellulose Propionate Molding and Extrusion Compounds |
| ANSI/ASTM D1593-1999 | 非剛性氯乙烯塑料薄板規范(08.01) | Specification for Nonrigid Vinyl Chloride Plastic Sheeting (08.01) |
| ANSI/ASTM D1599-1999 | 塑料管材、管道和管件短時液壓故障壓力試驗方法 | Test Method for Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings |
| ANSI/ASTM D1708-1997 | 用微型抗拉試樣測試塑料抗拉特性的方法 | Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens |
| ANSI/ASTM D1785-2006 | 聚氯乙烯(PVC)塑料管的規范.表40、80和120 | Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 |
| ANSI/ASTM D1895-1997 | 塑料表觀密度、容積因子和可傾注性試驗方法 | Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials |
| ANSI/ASTM D1898-1997 | 塑料抽樣慣例 | Practice for Sampling of Plastics |
| ANSI/ASTM D1921-2001 | 塑料粒徑(篩析法)標準測試方法(08.02) | Particle Size (Sieve Analysis) of Plastic Materials, Standard Test Method for (08.02) |
| ANSI/ASTM D1929-1996 | 塑料燃點特性測試方法(08.01) | Test Method for Ignition Properties of Plastics (08.01) |
| ANSI/ASTM D1972-2001 | 塑料90-03第55項通用標記慣例 | Practice for Generic Making of Plastics 90-03 Item 55 (08.01) |
| ANSI/ASTM D2104-2003 | 聚乙烯(PE)塑料管規范.表40 | Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 |
| ANSI/ASTM D2143-2000 | 增強熱固塑料管循環壓力強度試驗方法(08.04) | Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe |
| ANSI/ASTM D2235-2004 | ABS塑料管道和配件用液狀粘固劑規范 | Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
| ANSI/ASTM D2239-2003 | 以受控內徑為基準的聚乙烯(PE)塑料管(SIDR-PR)規范 | Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter |
| ANSI/ASTM D2290-2008 | 用分離盤法的塑料或增強塑料管表觀環狀拉伸強度用試驗方法 | Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method |
| ANSI/ASTM D2321-2009 | 排污水和其它重力流動設備用熱塑性塑料管的地下安裝用實施規程 | Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications |
| ANSI/ASTM D2412-2002 | 測定由平行板加載的塑料管材外部負荷特征的試驗方法 | Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading |
| ANSI/ASTM D2447-2003 | 以外徑尺寸為基準的聚乙烯(PE)塑料管規范.表40和80 | Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter |
| ANSI/ASTM D2457-1997 | 塑料薄膜和薄板鏡面光澤測試方法 | Test Method for Specular Gloss of Plastic Film and Sheeting |
| ANSI/ASTM D2464-2006 | 聚氯乙烯(PVC)塑料螺紋管配件規范.表 80 | Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
| ANSI/ASTM D2466-2006 | 聚氯乙烯(PVC)塑料管道配件規范.表40 | Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 |
| ANSI/ASTM D2467-2006 | 套管型聚氯乙烯(PVC)塑料管道配件規范.表80 | Specification for Socket-Type Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
| ANSI/ASTM D2468-1996 | 丙烯腈-丁二烯-苯乙烯共聚物塑料管材和管件規范,表 40 | Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40 |
| ANSI/ASTM D256-1993 | 塑料及電絕緣材料抗沖擊性試驗方法 | Test Methods for Impact Resistance of Plastics and Electrical Insulating Materials (08.01, 09.02) |
| ANSI/ASTM D2564-2004 | 聚氯乙烯塑料管道系統用液狀粘固劑規范 | Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems |
| ANSI/ASTM D2565-1999 | 塑料曝光用氙弧型(水冷)曝光儀操作規程(08.02) | Practice for Operating Xenon Arc-Type (Water-Cooled) Light Exposure Apparatus with and without Water for Exposure of Plastics (08.02) |
| ANSI/ASTM D2581-2001 | 聚丁烯塑料模塑和擠塑材料規范(08.02,08.04) | Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials (08.02, 08.04) |
| ANSI/ASTM D2609-2002 | 聚乙烯塑料管塑料插入接頭規范 | Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe |
| ANSI/ASTM D2647-1994 | 可交鏈乙烯塑料規范(08.02) | Specification for Cross-Linkable Ethylene Plastic (08.02) |
| ANSI/ASTM D2661-2008 | 丙烯腈-丁二烯-苯乙烯共聚物(ABS)表40塑料排水管、污水管和通風管及配件用規范. | Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings |
| ANSI/ASTM D2732-1997 | 塑料薄膜和薄板的自由線性熱收縮的測試方法 | Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting |
| ANSI/ASTM D2737-2003 | 聚乙烯塑料管規范 | Specification for Polyethylene (PE) Plastic Tubing |
| ANSI/ASTM D2749-2002 | 塑料管配件的尺寸表示符號 | Symbols for Dimensions of Plastic Pipe Fittings |
| ANSI/ASTM D2765-2001 | 交叉鏈接的聚乙烯塑料膨脹率和膠含量測定方法 | Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics |
| ANSI/ASTM D2838-1997 | 塑料薄膜和薄板收縮張力及定向釋放應力試驗方法 | Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting |
| ANSI/ASTM D2842-2001 | 硬質泡沫塑料吸水性測試方法 | Test Method for Water Absorption of Rigid Cellular Plastics (08.02) |
| ANSI/ASTM D2843-1999 | 塑料燃燒或分解釋放煙密度測試方法(08.02) | Test Method for Density of Smoke from the Burning or Decomposition of Plastics (08.02) |
| ANSI/ASTM D2852-1995 | 苯乙烯塑料排水管材和配件規范 | Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings |
| ANSI/ASTM D2856-1994 | 用空氣比重瓶測定硬質泡沫塑料的開孔率（孔隙率）的試驗方法(08.02) | Open-Cell Content (Porosity) of Rigid Cellular Plastics by the Air Pycnometer, Test Method for (08.02) |
| ANSI/ASTM D2863-2000 | 測量最小氧濃度支持臘燭狀塑料燃燒試驗方法 | Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) |
| ANSI/ASTM D2911-1994 | 塑料瓶尺寸公差規范 | Specification for Dimensions and Tolerances for Plastic Bottles |
| ANSI/ASTM D2949-2000 | 外徑3.25英寸的聚化乙烯塑料排水、排污管和配件規范 | Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings |
| ANSI/ASTM D2951-2000 | 3型和4型聚乙烯塑料耐熱應力龜裂性試驗方法(95-1,13項)(08.02) | Test Method for Resistance of Types 3 and 4 Polyethylene Plastics to Thermal Stress-Cracking (95-1, Item 13) (08.02) |
| ANSI/ASTM D2990-2001 | 塑料的張力、壓力和柔性蠕變以及蠕變斷裂試驗方法(08.02) | Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics (08.02) |
| ANSI/ASTM D3006-1999 | 聚乙烯塑料壓敏電絕緣膠帶規范 | Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape |
| ANSI/ASTM D3015-1995 | 塑料配合料中顏料擴散的微觀檢查的推薦實施規程(08.02) | Recommended Practice for Microscopical Examination of Pigment Dispersion in Plastic Compounds (08.02) |
| ANSI/ASTM D3035-2008 | 以受控外徑為基準的聚乙烯(PE)塑料管(DR-PR)用規范 | Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter |
| ANSI/ASTM D3122-1995 | 苯乙烯橡膠塑料管和配件溶劑接合劑規范 | Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings |
| ANSI/ASTM D3139-1996 | 苯乙烯橡膠塑料承壓管和配件溶劑接合劑規范 | Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals |
| ANSI/ASTM D3149-2006 | 電絕緣用交連可吸熱的聚烯烴塑料管規范 | Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation |
| ANSI/ASTM D3212-2007 | 使用軟質人造橡膠密封料制塑料排水管和污水管用接頭的規范 | Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals |
| ANSI/ASTM D3261-2003 | 聚乙烯(PE)塑料管和管道用熱熔接聚乙烯(PE)塑料配件規范 | Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing |
| ANSI/ASTM D3291-1997 | 壓力作用下聚氯乙烯塑料增塑劑兼容性慣例 | Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics under Compression (08.03) |
| ANSI/ASTM D3309-1996 | 聚丁烯(PB)塑料熱水配送系統規范 | Specification for Polybutylene (PB) Plastic Hot-Water Distribution Systems |
| ANSI/ASTM D3350-2001 | 聚乙烯塑料管和配件材料規范 | Specification for Polyethylene Plastics Pipe and Fitting Materials |
| ANSI/ASTM D3354-1996 | 用平行板法測定塑料薄膜阻擋承載力的方法(08.03) | Test Method for Blocking Load of Plastic Film by the Parallel Plate Method |
| ANSI/ASTM D3380-2003 | 塑料片基微波電路基片的相對透電率(介電常數)和耗散因數測試方法 | Test Method for Relative Permittivity (dielectric Constant) and Dissipation Factor of Plastic-based Microwave Circuit Substrates |
| ANSI/ASTM D3576-1998 | 硬質泡沫塑料孔徑尺寸測試方法(08.02) | Test Method for Cell Size of Rigid Cellular Plastics (08.02) |
| ANSI/ASTM D3748-1998 | 高密度多孔熱固硬塑料評定慣例(08.02) | Practice for Evaluating High Density Rigid Cellular Thermoplastics (08.02) |
| ANSI/ASTM D3763-2000 | 載荷-位移傳感器測定塑料高速刺穿特性的方法(08.03) | Plastics Using Load and Displacement Sensors, Test Method for High-Speed Puncture Properties of (08.03) |
| ANSI/ASTM D3795-2000 | 轉矩流變儀測定熱固性塑料的熱流量和固化特性的方法(15.04) | Test Method for Thermal Flow and Cure Properties of Thermosetting Plastics by Torque Rheometer (15.04) |
| ANSI/ASTM D3801-2000 | 垂直位置固體塑料可比熄滅特性測量方法 | Method for Measuring the Comparative Extinguishing Characteristics of Solid Plastics in a Vertical Position |
| ANSI/ASTM D3814-1999 | 塑料定點燃燒試驗方法指南 | Guide for Locating Combustion Test Method for Plastics |
| ANSI/ASTM D3839-2008 | 柔性增強熱固性樹脂管和增強塑料砂漿管的地下安裝用實施規程 | Practice for Underground Installation of Flexible Reinforced Thermosetting Resin Pipe and Reinforced Plastic Mortar Pipe (08.04) |
| ANSI/ASTM D3840-2001 | 非承壓增強塑料砂漿管配件規范(08.04) | Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications |
| ANSI/ASTM D3841-2001 | 玻璃纖維增強聚酯塑料板用規范 | Specification for Glass Fiber-Reinforced Polyester Plastic Panels |
| ANSI/ASTM D3915-1999 | 聚氯乙烯(PVC)和有關塑料管及配件部件規范 | Specification for Poly (Vinyl Chloride) (PVC) and Related Plastic Pipe and Fitting Compounds (08.04) |
| ANSI/ASTM D4019-1994 | 用庫侖分析法測定塑料中水分的試驗方法 | Test Method for Moisture in Plastics by Coulometry (08.03) |
| ANSI/ASTM D4065-2001 | 塑料動態機械特性測定和報告慣例 | Practice for Determining and Reporting Dynamic Mechanical Properties of Plastics (08.03) |
| ANSI/ASTM D4092-2001 | 塑料動態機械測量術語的描述和定義 | Definitions and Description of Terms Relating to Dynamic Mechanical Measurements on Plastics (08.03) |
| ANSI/ASTM D4101-2001 | 丙烯塑料注塑和擠壓材料規范 | Propylene Plastic Injection and Extrusion Materials, Specification for (08.03) |
| ANSI/ASTM D4167-1997 | 纖維增強塑料風扇和鼓風機的規范 | Specification for Fiber-Reinforced Plastic Fans and Blowers |
| ANSI/ASTM D4204-2000 | 用于次魁毒素研究的塑料薄膜樣品制備慣例 | Practice for Preparing Plastic Film Specimens for a Round-Robin Study |
| ANSI/ASTM D4272-1999 | 用裝有測量儀器的墜落鏢測量塑料薄膜耐沖擊性的方法 | Plastic Film by Instrumented Dart Drop, Test Method for Impact Resistance of (08.03) |
| ANSI/ASTM D4321-1999 | 塑料薄膜包裝件試驗方法(08.02) | Test Method for Package Yield of Plastic Film (08.02) |
| ANSI/ASTM D4329-1999 | 塑料的光水暴露(熒光紫外線和冷凝型)慣例 | Practice for Operating Light and Water Apparatus (Fluorescent UV and Condensation Type) for Exposure of Plastics |
| ANSI/ASTM D4364-1994 | 用聚集自然陽光法實施塑料加速室外氣候老化的實施規程 | Practice for Performing Accelerated Outdoor Weathering of Plastics Using Concentrated Natural Sunlight (08.03) |
| ANSI/ASTM D4385-1995 | 熱固增強塑料拉擠成型產品可視缺陷分類的實施規程 | Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products (94-3, Items 58, 100) (08.03) |
| ANSI/ASTM D4396-1999 | 非承壓管道(X-15-358)用硬質聚氯乙烯(PVC)和相關塑料化合物規范(08.04) | Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related Plastic Compounds for Non-Pressure Piping Products (X-15-358) (08.04) |
| ANSI/ASTM D4459-1999 | 室內塑料設備光照考驗用加速耐光氙弧型(水冷)光照射裝置操作慣例 | Practice for Operating an Accelerated Lightfastness Xeno-Arc-Type (Water Cooled) Light-Exposure Apparatus for the Exposure of Plastics for Indoor Applications |
| ANSI/ASTM D4476-1997 | 纖維增強拉擠塑料棒彎曲特性試驗方法 | Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods |
| ANSI/ASTM D4508-1998 | 塑料小片沖擊強度測試方法(08.03) | Test Methods for Chip Impact Strength of Plastics (08.03) |
| ANSI/ASTM D4551-2001 | 聚氯乙烯(PVC)塑料柔性隱蔽式含水薄膜用規范 | Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane |
| ANSI/ASTM D4674-1989 | 暴露在室內熒光燈和透過窗戶的日光中的塑料顏色穩定性的加速試驗方法 | Accelerated Testing for Color Stability of Plastics Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight, Test Method for (08.03) |
| ANSI/ASTM D4804-1998 | 非剛性固體塑料可燃性測試方法(08.03) | Test Method for Determining the Flammability Characteristics of Non-Rigid Solid Plastics (08.03) |
| ANSI/ASTM D4819-1997 | 聚烯烴塑料制軟多孔材料規范 | Specification for Flexible Cellular Materials Made From Polyolefin Plastics |
| ANSI/ASTM D4923-2001 | 增強熱固性塑料桿規范 | Specification for Reinforced Thermosetting Plastic Poles |
| ANSI/ASTM D4968-2000 | 塑料標準(包括模型精度和偏差說明)年審流程圖使用指南(08.03) | Guide to Using the Flow Chart for Annual Review of Standards Including the Model Precision and Bias Statement for Plastics (08.03) |
| ANSI/ASTM D5023-2001 | 用三點彎曲測量塑料動態機械特性的方法 | Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using Three Point Bending (08.03) |
| ANSI/ASTM D5024-2001 | 壓縮過程中塑料動態機械特性的測量方法 | Test Method for Measuring the Dynamic Mechanical Properties of Plastics in Compression (08.03) |
| ANSI/ASTM D5025-1999 | 塑料小刻度燃燒試驗的試驗室燃爐規范 | Specification for a Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials (08.03) |
| ANSI/ASTM D5026-2001 | 塑料動態拉伸機械性能試驗方法 | Test Method for Measuring the Dynamic Mechanical Properties of Plastics in Tension (08.03) |
| ANSI/ASTM D5033-2000 | 再生塑料正確使用標準編制指南 (08.03) | Guide for the Development of Standards Relating to the Proper Use of Recycled Plastics (08.03) |
| ANSI/ASTM D5045-1999 | 塑料平面應變裂縫強度和應變能量釋放速率測試方法 | Test Method for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials (08.03) |
| ANSI/ASTM D5071-1999 | 光降解塑料曝射用帶水氙弧光型曝光設備操作慣例(08.03) | Practice for Operating Xenon ARC-Type Exposure Apparatus with Water for Exposure of Photodegradable Plastics (08.03) |
| ANSI/ASTM D5203-1998 | 再生高密度聚乙烯材料模塑和擠塑聚乙烯塑料規范 | Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer HDPE Sources (08.03) |
| ANSI/ASTM D5207-1998 | 塑料小型燃燒試驗20和125mm試驗火焰的校準慣例(08.03) | Practice for Calibration of 20 and 125 mm Test Flames for Small-Scale Burning Tests on Plastic Materials (08.03) |
| ANSI/ASTM D5208-2001 | 光降解塑料輻照用熒光紫外線燈和縮聚裝置的操作慣例(08.03) | Practice for Operating Fluorescent UV and Condensation Apparatus for Exposure of Photodegradable Plastics (08.03) |
| ANSI/ASTM D5210-1992 | 測定在城市污水管污泥中塑料材料的厭氧生物降解的試驗方法 | Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewer Sludge (08.03) |
| ANSI/ASTM D5271-1992 | 活化污泥污水處理系統中利用塑料材料的有氧生物降解的試驗方法 | Test Method for Accessing the Aerobic Biodegradation of Plastic Materials in an Activated Sludge Wastewater-Treatment-System (08.03) |
| ANSI/ASTM D5272-1992 | 光降解塑料戶外暴露測試的實施規程 | Practice for Outdoor Exposure Testing of Photodegradable Plastics (08.03) |
| ANSI/ASTM D5279-2001 | 塑料扭轉動態機械特性測量方法 | Test Method for Measuring the Dynamic Mechanical Properties of Plastics in Torsion (08.03) |
| ANSI/ASTM D5338-1998 | 受控混合條件下測定塑料需氧生物降解的方法 | Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions |
| ANSI/ASTM D5364-2008 | 帶燒煤裝置的玻璃纖維增強塑料煙囪內襯設計、制造和安裝用指南 | Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-fired Units |
| ANSI/ASTM D5418-2001 | 用雙懸臂束測試塑料動態機械特性的方法 | Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using a Dual Cantilever Beam (08.03) |
| ANSI/ASTM D5420-1998 | 重物跌落沖擊平板硬質塑料試件測量耐沖擊力的試驗方法 | Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) |
| ANSI/ASTM D543-2001 | 評價塑料抗化學試劑慣例 | Practices for Evaluating the Resistance of Plastics to Chemical Reagents |
| ANSI/ASTM D5436-1999 | 注塑聚甲基丙烯酸甲酯塑料棒、管和型材規范 | Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes and Shapes |
| ANSI/ASTM D5492-1998 | 丙烯塑料二甲苯可溶性測定方法 | Test Method for Determination of Xylene Solubles in Propylene Plastics |
| ANSI/ASTM D5510-1994 | 可氧化降解塑料的加熱老化實施規程 | Practice for Heat Aging of Oxidatively Degradable Plastics |
| ANSI/ASTM D5628-2001 | 用墜鏢法(撞錘或墜落重物)測試平坦、剛性塑料樣品抗沖擊特性的方法 | Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Weight) (08.03) |
| ANSI/ASTM D5857-2002 | 采用ISO協議和方法的聚酯塑料注入和擠壓材料規范 | Specification for Propylene Plastic Injection and Extrusion Materials Using ISO Protocol and Methodology |
| ANSI/ASTM D5930-2001 | 利用瞬間線性源技術測量塑料熱傳導率的試驗方法 | Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique |
| ANSI/ASTM D5934-1997 | 用三點彎曲法測定在裝載控制速度下剛性和半剛性塑料樣品彈性模量的方法 | Test Method for Determination of the Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three Point Bending |
| ANSI/ASTM D5947-2001 | 固體塑料樣品物理尺寸測量方法 | Test Methods for Physical Dimensions of Solid Plastics Specimens |
| ANSI/ASTM D5988-1997 | 混合后的殘留塑料或塑料廢物中有氧生物降解測定方法 | Test Method for Determining the Aerobic Biodegradation of Soil of Plastic Materials or Residual Plastic Materials After Composing |
| ANSI/ASTM D6117-1997 | 廢塑料加工機械緊固件試驗方法 | Test Method for Mechanical Fasteners in Plastic Lumber and Shapes |
| ANSI/ASTM D6150-1997 | 估計揮發性引起的塑料溶膠和有機溶膠處理損失的試驗方法 | Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility |
| ANSI/ASTM D618-1995 | 測試用電絕緣材料和調理塑料材料的實施規程 | Practice for Conditioning Plastics and Electrical Insulating Materials for Testing (08.01) |
| ANSI/ASTM D6226-1998 | 硬質泡沫塑料蜂窩含量試驗方法 | Test Method for Open Cell Content of Rigid Cellular Plastics |
| ANSI/ASTM D6272-2000 | 利用四點結合法進行非增強和增強塑料及電氣絕緣材料的柔韌性試驗方法 | Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending |
| ANSI/ASTM D6288-1998 | 試驗前分選和清洗回收塑料慣例 | Practice for Separation and Washing Recycled Plastics Prior to Testing |
| ANSI/ASTM D6289-1998 | 模塑熱固性塑料的模具尺寸收縮量測量的試驗方法 | Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics |
| ANSI/ASTM D6290-1998 | 塑料托盤顏色測定的試驗方法 | Test Method for Color Determination of Plastic Pellets |
| ANSI/ASTM D6340-1998 | 在水和堆肥環境中測定放射性同位素塑料氧化降解的方法 | Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an (A) Aqueous or (B) Compost Environment |
| ANSI/ASTM D6341-1998 | 在-30o 到140oF (-34.4o and 60oC) 之間測定塑料廢物和塑料廢舊成形物熱膨脹線性系數的方法 | Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes between -30o and 140oF (-34.4o and 60oC) |
| ANSI/ASTM D635-1998 | 水平位置自支撐式塑料的燃燒率和/或燃燒程度與燃燒時間測試驗方法 | Test Method for Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position (08.01) |
| ANSI/ASTM D6360-1999 | 塑料封閉碳弧曝光慣例 | Practice for Enclosed Carbon-Arc Exposures of Plastics |
| ANSI/ASTM D638-2001 | 塑料拉伸性能試驗方法 | Test Method for Tensile Properties of Plastics (08.01) |
| ANSI/ASTM D6394-2001 | 磺基塑料規范 | Specification for Sulfone Plastics |
| ANSI/ASTM D6395-1999 | 硬塑料耐平地軟沖擊試驗方法 | Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics |
| ANSI/ASTM D6400-1999 | 塑料復合特性規范 | Specification for Determining the Compostablility of Plastic Materials |
| ANSI/ASTM D6435-1999 | 塑料成材和型材剪切特性測試方法 | Test Method for Shear Properties of Plastic Lumber and Shapes |
| ANSI/ASTM D6662-2001 | 聚烯烴基塑料廢物蓋板規范 | Specification for Polyolefin-Based Plastic Lumber Decking Boards |
| ANSI/ASTM D6691-2001 | 利用規定的微生物同生群測定海洋環境中塑料需氧生物降解的方法 | Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium |
| ANSI/ASTM D6692-2001 | 海水中無線電標簽聚合塑料生物降解性的測定方法 | Test Method for Determining the Biodegradability of Radiolabeled Polymeric Plastic Materials in Seawater |
| ANSI/ASTM D671-1990 | 采用等幅強振動方法測定塑料撓性疲勞強度的方法 | Test Method for Flexural Fatigue of Plastics by Constant-Amplitude-of-Force (08.01) |
| ANSI/ASTM D6712-2001 | 超高分子量聚乙烯實心塑料型材規范 | Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes |
| ANSI/ASTM D6864-2003 | 實心彩色塑料壁板產品的顏色和外觀保持性規范 | Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products |
| ANSI/ASTM D7251-2009 | 雜色塑料壁板產品顏色和外觀保持性用規范 | Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products |
| ANSI/ASTM D7445-2009 | 帶泡沫塑料支持(乙烯基側板支持)的剛性聚乙烯(PVC)用規范 | Specification for Rigid Poly(vinyl Chloride) (PVC) Siding with Foam Plastic Backing (backed Vinyl Siding) |
| ANSI/ASTM D792-2000 | 位移法測定塑料密度和比重(相對密度)的方法(08.01) | Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement (08.01) |
| ANSI/ASTM D953-1992 | 塑料的承載強度的試驗方法 | Test Method for Bearing Strength of Plastics (08.01) |
| ANSI/ASTM E517-2000 | 薄板金屬塑料應變比R試驗方法 | Test Method for Plastic Strain Ratio R for Sheet Metal |
| ANSI/ASTM E5870-1997 | 塑料特性保留指數計算慣例 | Practice for Calculating the Property Retention Index of Plastics |
| ANSI/ASTM F1092-2004 | 擠拔玻璃纖維增強塑料制露天防風暴和方型防護扶手規范 | Specification for Fiberglass (Grp) Pultruded Open-Weather Storm- and Guard-Square Handrails |
| ANSI/ASTM F1365-1991 | 采用柔性合成橡膠密封件的塑料地下管道接頭耐水滲透性試驗方法 | Test Method For Water Infiltration Resistance Of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals |
| ANSI/ASTM F1429-1999 | 用柔性合成橡膠密封件固定在套桶中的塑料地下管道接頭組合力試驗方法 | Test Method For Assembly Force Of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located In The Bell |
| ANSI/ASTM F1545-1996 | 帶塑料內襯的鐵合金管、配件和法蘭規范 | Specification For Plastic-lined Ferrous Metal Pipe, Fittings, And Flanges |
| ANSI/ASTM F1589-1996 | 塑料管裂紋快速擴展臨界壓力測定方法 | Test Method for Determination of the Critical Pressure for Rapid Crack Propagation in Plastic Pipe |
| ANSI/ASTM F1668-2008 | 埋設的塑料管施工程序用指南 | Guide for Construction Procedures for Buried Plastic Pipe |
| ANSI/ASTM F1733-2007 | 聚酰胺(PA)塑料管和管道用端面熱熔接聚酰胺(PA)塑料配件的規范 | Specification for Butt Heat Fusion Polyamide PA Plastic Fitting for Polyamide PA Plastic Pipe and Tubing |
| ANSI/ASTM F1760-2001 | 含有再加工-再生材料的聚氯乙烯非承壓塑料管規范 | Specification for Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content |
| ANSI/ASTM F1866-2007 | 聚氯乙烯(PVC)塑料壁厚40排水管和DWV加工配件規范 | Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings |
| ANSI/ASTM F1924-2005 | 外徑可控的聚乙烯供氣管道用塑料機械配件規范 | Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing |
| ANSI/ASTM F2018-2000 | 使用水平應力拉伸樣品測定塑料失效時間的試驗方法 | Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens |
| ANSI/ASTM F2019-2003 | 將玻璃纖維增強塑料(GRP)現場硫化熱固性樹脂管(CIPP)現場拖拉并安裝進已有管道的操作規程 | Practice For Rehabilitation Of Existing Pipelines And Conduits By The Pulled In Place Installation Of Glass Reinforced Plastic Grp Cured-in-place Thermosetting Resin Pipe Cipp |
| ANSI/ASTM F2021-2006 | 塑料虹吸式屋面排水系統設計和安裝規范 | Specification for Design and Installation of Plastic Syphonic Roof Drainage Systems |
| ANSI/ASTM F2045-2000 | 直接和間接讀取液位的管形玻璃和塑料觀測指示器規范 | Specification for Indicators, Sight, Liquid Level, Direct/Indirect Reading, Tubular Glass/Plastic |
| ANSI/ASTM F2135-2001 | 模制排水、污物和通風的短型塑料配件規范 | Specification for Molded Drain Waste and Vent (DWV) Short-Pattern Plastic Fittings |
| ANSI/ASTM F2159-2005 | SDR9交聯聚乙烯(PEX)管道用帶銅夾緊環固的嵌入式塑料配件規范 | Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-Linked Polyethylene (PEX) Tubing |
| ANSI/ASTM F2206-2002 | 熔縫聚乙烯塑料管、管配件、片材、板材或砧板材制造的配件規范 | Specification for Fabricated Fittings of Butt-fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock or Block Stock |
| ANSI/ASTM F2261-2006 | 表:40～80插接式氯化聚氯乙烯（PVC）塑料管配件的標準規范 | Test Method for Pressure Rating Poly(vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-type |
| ANSI/ASTM F2390-2006 | 具有后工業循環含量WK3886的聚氯乙烯塑料排水管、廢棄物和通風孔管及配件的規范 | Specification for Poly(vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post0industrial Recycle Content WK3886 |
| ANSI/ASTM F2735-2009 | SDR9交聯聚乙烯(PEX)和升溫聚乙烯(PE-RT)管道用塑料內插配件用規范 | Specification for Plastic Insert Fittings for SDR9 Cross-Linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing |
| ANSI/ASTM F2768-2009 | 塑料管道元件中帶彈性密封的改良短牙英制梯形螺紋接合用規范 | Specification For For Modified Stub Acme Thread Joint With Elastomeric Seal In Plastic Piping Components |
| ANSI/ASTM F409-2002 | 可拆卸更換的熱塑性塑料管及管道配件的規范 | Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings |
| ANSI/ASTM F450-2001 | 真空吸塵器軟管耐熱性及可靠性試驗方法(塑料線增強) | Methods for Testing Vacuum Cleaner Hose for Durability and Reliability (Plastic Wire Reinforced) |
| ANSI/ASTM F477-2008 | 塑料管連接用彈性體密封件(墊圈)規范 | Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
| ANSI/ASTM F481-1996 | 化糞池瀝濾場用熱塑性塑料管和波紋管的安裝實施規程 | Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields |
| ANSI/ASTM F493-2004 | 氯化聚氯乙烯(CPVC)塑料管及配件用溶劑粘結劑規范 | Specification for Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe and Fittings |
| ANSI/ASTM F610/F 610M-2005 | 用熱循環技術評價模塑聚氯乙烯(PVC)塑料管配件質量的試驗方法 | Test Method For Evaluating The Quality Of Molded Poly Vinyl Chloride Pvc Plastic Pipe Fittings By The Heat Reversion Technique |
| ANSI/ASTM F628-2008 | 帶泡沫芯的丙烯腈-丁二烯-苯乙烯(ABS)表40塑料排水管、污水管和通風管用規范 | Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core |
| ANSI/ASTM F656-2008 | 聚氯乙烯(PVC)塑料管和配件的溶劑膠結接口用底漆規范 | Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings |
| ANSI/ASTM F679-2008 | 大口徑聚氯乙烯(PVC)塑料污水管及配件的標準規范 | Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings |
| ANSI/ASTM F689-1997 | 測定內壁金屬鑄件塑料氣壓管道地面溫度慣例 | Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe within Metallic Casings |
| ANSI/ASTM F714-2008 | 以外徑尺寸為基準的聚乙烯(PE)塑料管(SDR-PR)用規范 | Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter |
| ANSI/ASTM F758-1995 | 高速公路、機場和類似場所排水系統用光滑壁聚氯乙烯(PVC) 塑料管道系統規范 | Specification for Smooth-Wall Poly (Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage |
| ANSI/ASTM F809/F 809M-2000 | 大直徑聚丁烯塑料管規范 | Specification for Large Diameter Polybutylene (PB) Plastic Pipe |
| ANSI/ASTM F877-2006 | 交聯聚乙烯(PEX)塑料熱水和冷水配給系統用規范 | Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems |
| ANSI/ASTM F913-2002 | 連接塑料管用熱塑彈性密封件(墊圈)規范 | Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
| ANSI/ASTM F948-1994 | 固定流體內壓下塑料管道系統和組件失效時間-試驗方法 | Test Method for Time-to-Failure of Plastic Piping Systems and Components under Constant Internal Pressure with Flow |
| ANSI/AWS B2.4-2006 | 焊接工藝和熱塑性塑料性能認證的規范 | Specification for Welding Procedure and Performance Qualification for Thermoplastics |
| ANSI/AWS G1.1M/G 1.1-2006 | 熱塑料的超聲波組合指南 | Guide to Ultrasonic Assembly of Thermoplastics |
| ANSI/AWS G1.2M/G 1.2-1999 | 熱塑性塑料標準化超聲焊接試件規范 | Specification for Standardized Ultrasonic Welding Test Specimen for Thermoplastics |
| ANSI/AWS G1.6-2006 | 熱氣焊擠壓和加熱工具對塑料焊接檢驗師資格規范 | Specification for the Qualification of Plastics Welding Inspectors for Hot Gas Extrusion, and Heated Tool Blutt Thermoplastic Welds |
| ANSI/AWWA F101-2007 | 玻璃纖維增強塑料洗滌水槽和流水槽的接觸模壓 | Contact Molded, Fiberglass Reinforced Plastic Washwater Troughs and Launders |
| ANSI/AWWA F102-2007 | 合模模塑玻璃纖維增強塑料的堰板、浮渣檔板和安裝托架 | Matched-Die Molded, Fiberglass Reinforced Plastic Weir Plates, Scum Baffles, and Mounting Brackets |
| ANSI/DASMA 107-1997 | 使用泡沫塑料隔熱的車庫門室內燃燒試驗標準 | Room Fire Test Standard for Garage Doors Using Foam Plastic Insulation |
| ANSI/EIA 540AB00-1991 | 電子設備用塑料方形扁平組件的片載插座的空白詳細規范 | Chip Carrier Sockets for Plastic Quad Flat Packages for Use in Electronic Equipment, Blank Detail Specification for |
| ANSI/EIA 540ABAA-1991 | 引線間隙為0.635mm(0.25英寸)的塑料方形平接頭用片載插孔的詳細規范 | Detail Specification for Chip Carrier Sockets for Plastic Quad Flat Pack 0.635-mm (0.25-in) Lead Spacing (Gullwing) |
| ANSI/EIA 540AC00-1991 | 電子設備用"J"型引線塑料片載體(PCC)組件的片載插座的空白詳細規范 | Chip Carrier Sockets for Plastic Chip Carrier (PCC) Packages with J Type Leads for Use in Electronic Equipment, Blank Detail Specification for |
| ANSI/EIA 540ACAA-1991 | 引線間隙為1.27mm(0.50英寸)的塑料片載(PCC)系列的片載插孔的詳細規范 | Chip Carrier Sockets for Plastic Chip Carrier Family 1.27 mm (0.50 inch) Lead Spacing, Detail Specification for |
| ANSI/EIA-364-82A-2005 | 電連接器套、連接器組件和插座的塑料腐蝕性試驗程序 | Corrosivity of Plastics Test Procedure for Electrical Connector Housing, Connector and Socket Housings |
| ANSI/FM 4996-2007 | 和木質托盤等效的閑置塑料托盤的分類 | Classification of Idle Plastic Pallets as Equivalent to Wood Pallets |
| ANSI/IAPMO Z124.1.2-2005 | 塑料浴缸和淋浴裝置 | Plastic Bathtub and Shower Units |
| ANSI/IAPMO Z124.3-2005 | 塑料洗臉盆 | Plastic Lavatories |
| ANSI/IAPMO Z124.5-2006 | 塑料抽水馬桶座圈 | Plastic Toilet (Water Closets) Seats |
| ANSI/IAPMO Z124.6-2007 | 塑料洗池 | Plastic Sinks |
| ANSI/IAPMO Z124.9-2004 | 塑料小便池固定物 | Plastic Urinal Fixtures |
| ANSI/NFPA 275-2009 | 泡沫塑料熱障的評估試驗標準方法 | Standard Method of Tests for the Evaluation of Thermal Barriers Used Over Foam Plastic |
| ANSI/NSF 14(i10)-2006 | 塑料管道系統組件和相關材料 | Plastics Piping System Components and Related Materials |
| ANSI/NSF 14(i11)-2005 | 塑料管道系統部件和相關材料 | Plastics Piping System Components and Related Materials |
| ANSI/NSF 14(i12r2)-2006 | 塑料管道系統部件和相關材料 | Plastics Piping System Components and Related Materials |
| ANSI/NSF 14(i13)-2006 | 塑料管道系統部件及相關材料 | Plastic Piping System Components and Related Materials |
| ANSI/NSF 14(i14)-2006 | 塑料管道系統部件和相關材料 | Plastics Piping System Components and Related Materials |
| ANSI/NSF 14(i16)-2006 | 塑料管道系統部件及相關材料 | Plastic Piping System Components and Related Materials |
| ANSI/NSF 14(i17)-2007 | 塑料管系統部件和相關材料 | Plastic piping system components and related materials |
| ANSI/NSF 14(i20)-2007 | 塑料管道系統配件及其相關材料 | Plastic piping system components and related materials |
| ANSI/NSF 14(i21)-2008 | 塑料管道系統組件及其材料 | Plastics piping system components and related materials |
| ANSI/NSF 14(i22)-2008 | 塑料管道系統部件及相關材料 | Plastics piping system components and related materials |
| ANSI/NSF 14(i23)-2008 | 塑料管道系統部件和相關材料 | Plastics piping system components and related materials |
| ANSI/NSF 14(i24)-2008 | 塑料管道組件和相關材料 | Plastics piping system components and related materials |
| ANSI/NSF 14(i27)-2009 | 塑料管道系統部件及其相關材料 | Plastics piping system components and related materials |
| ANSI/NSF 14(i29)-2009 | 塑料管道系統組件及其材料 | Plastics piping system components and related materials |
| ANSI/NSF 14(i32)-2009 | 塑料管道系統組件及相關材料 | Plastics piping system components and related materials |
| ANSI/NSF 14(i33)-2009 | 塑料管道系統部件及其相關材料 | Plastics piping system components and related materials |
| ANSI/NSF 14(i7)-2004 | 塑料管道組件和相關材料 | Plastics Piping System Components and Related Materials |
| ANSI/NSF 14-2003 | 塑料管道系統配件和相關材料 | Plastics Piping System Components and Related Materials (i4) |
| ANSI/NSF 21-1996 | 熱塑性塑料垃圾容器 | Thermoplastic Refuse Containers |
| ANSI/NSF 35-1999 | 落地式食品加工設備用層壓塑料制品 | Laminated Plastics for Surfacing Food Service Equipment |
| ANSI/SAE J1344-1993 | 塑料零件的標記 | Marking of Plastic Parts |
| ANSI/SAE J1568-1993 | 液壓盤式制動器制動缸塑料活塞用材料 | Materials for Plastic Pistons for Hydraulic Disc Brake Cylinders |
| ANSI/SPI B151.1-2007 | 塑料機械.臥式噴射模塑機.制造、維護和使用的安全要求 | Plastics Machinery - Horizontal Injection Molding Machines - Safety Requirements for Manufacture, Care, and Use |
| ANSI/SPI B151.20-1999 | 塑料薄膜和薄片纏繞機.生產、維護和使用 | Plastic Sheet Production Machinery - Manufacture, Care and Use |
| ANSI/SPI B151.27-2003 | 塑料機械.與臥式注射成型機一起使用的機器人.集成、維護和使用的安全要求 | Plastics Machinery – Robots Used with Horizontal Injection Molding Machines – Safety Requirements for the Integration, Care, and Use |
| ANSI/SPI B151.5-2000 | 塑料薄膜和片纏繞機.生產、維護和使用 | Plastic Film and Sheet Winding Machinery - Manufacture, Care, and Use |
| ANSI/UL 1887-2004 | 可視火焰和煙塵特性用塑料灑水管燃燒試驗用安全標準 | Standard for Safety for Fire Test of Plastic Sprinkler Pipe for Visible Flame and Smoke Characteristics (Proposal Dated December 19, 2008) |
| ANSI/UL 2360-2004 | 半導體器械構造用塑料的可燃性能測定的試驗方法 | Test Methods for Determining the Combustibility Characteristics of Plastics Used in Semi-Conductor Tool Construction |
| ANSI/UL 94C-2009 | 電氣設備和用具中塑料零部件的易燃性安全標準 | Standard for Safety for Tests for Flammability of Plastic Materials for Parts in Devices and Appliances |
| ANSI/UL 94D-2009 | 電氣設備和用具中塑料零部件的易燃性安全標準（提案日期 8/8/08） | Standard for Safety for Flammability of Plastic Materials for Parts in Devices and Appliances (Proposals dated 8/8/08) |
| ANSI/UL 94E-2009 | 電氣設備和用具中塑料零部件的易燃性安全標準（提案日期 2/27/2009） | Standard for Safety for Flammability of Plastic Materials for Parts in Devices and Appliances (Proposal dated 2/27/2009) |
| ASME BPVC Section 10-2001 | ASME鍋爐和壓力容器規程.第10節:纖維增強塑料壓力容器 | (ASME Boiler & Pressure Vessel Code - Section 10: Fiber-Reinforced Plastic Pressure Vessels) |
| ASME RTP-1-2000 | 增強熱固塑料耐腐蝕設備 | (Reinforced thermoset plastic corrosion resistant equipment) |
| ASME RTP-1b Addenda-2002 | 增強熱固塑料耐腐蝕設備.補充 | (Reinforced thermoset plastic corrosion resistant equipment; Addenda) |
| ASTM B532-1985(2007) | 電鍍塑料表面外觀 | Standard Specification for Appearance of Electroplated Plastic Surfaces |
| ASTM C1147-2001(2006) | 耐化學腐蝕熱塑(性)塑料的短期拉伸焊接強度測定的標準實施規程 | Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics |
| ASTM C1579-2006 | 限制纖維加筋混凝土的塑料收縮破裂評定的標準試驗方法（用一個鋼格子插入物） | Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert) |
| ASTM D1042-2006 | 加速操作狀態下塑料線性尺寸變化的標準試驗方法 | Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions |
| ASTM D1203-1994(2003) | 用活性碳法測定塑料的揮發損失的標準試驗方法 | Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods |
| ASTM D1239-2007 | 用化學制品測定塑料薄膜抗萃取性的標準試驗方法 | Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals |
| ASTM D1248-2005 | 電線和電纜用聚乙烯塑料擠制材料標準規范 | Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable |
| ASTM D1435-2005 | 塑料的室外風化的標準操作規程 | Standard Practice for Outdoor Weathering of Plastics |
| ASTM D1499-2005 | 塑料用濾光明火碳弧型曝光裝置的標準實施規程 | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics |
| ASTM D1505-2003 | 用密度梯度法測定塑料密度的標準試驗方法 | Standard Test Method for Density of Plastics by the Density-Gradient Technique |
| ASTM D1527-1999(2005) | 丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料管材范.表40和80 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 |
| ASTM D1599-1999(2005) | 塑料管道和配件耐短時液壓力的標準試驗方法 | Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings |
| ASTM D1603-2006 | 烯烴塑料中碳黑含量的標準試驗方法 | Standard Test Method for Carbon Black Content in Olefin Plastics |
| ASTM D1621-2004a | 硬質泡沫塑料的壓縮性能的標準試驗方法 | Standard Test Method for Compressive Properties Of Rigid Cellular Plastics |
| ASTM D1708-2006a | 用微力拉伸塑料測量塑料的拉伸特性的標準試驗方法 | Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens |
| ASTM D1785-2006 | 聚氯乙烯(PVC)塑料管標準規范.表40、80和120 | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 |
| ASTM D1822-2006 | 對斷裂塑料及電絕緣材料的拉伸沖擊能量的標準測試方法 | Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials |
| ASTM D1824-1995(2002) | 在低剪切速率下塑料溶膠和有機溶膠的表觀粘度的標準測試方法 | Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates |
| ASTM D1921-2006 | 塑料材料粒度(篩析)的標準試驗方法 | Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials |
| ASTM D1972-1997(2005) | 塑料產品的類別標記的標準實施規程 | Standard Practice for Generic Marking of Plastic Products |
| ASTM D1975-1995(2006) | 塑料注模開口桶抗環境應力斷裂的標準試驗方法 | Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails |
| ASTM D2093-2003 | 在膠粘劑粘結前塑料表面的制備的標準實施規程 | Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding |
| ASTM D2104-2003 | 聚乙烯(PE)塑料管標準規范.表40 | Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 |
| ASTM D2143-2000(2005)e1 | 增強熱固塑料管耐周期性壓力強度的標準試驗方法 | Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe |
| ASTM D2235-2004 | 丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料管和配件用液態粘結劑的標準規范 | Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
| ASTM D2239-2003 | 以受控內徑為基準的聚乙烯(PE)塑料管(SIDR-PR)標準規范 | Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter |
| ASTM D2301-1999(2004) | 氯乙烯塑料壓敏電絕緣帶 | Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape |
| ASTM D2444-1999(2005) | 用落錘法測定熱塑性塑料管和配件耐沖擊性的試驗方法 | Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) |
| ASTM D2447-2003 | 以外徑尺寸為基準的聚乙烯(PE)塑料管標準規范.表40和80 | Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter |
| ASTM D2464-2006 | 加螺紋聚氯乙烯（PVC）塑料管配件的標準規范.表80 | Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
| ASTM D2466-2006 | 聚氯乙烯（PVC）塑料管配件的標準規范.表40 | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 |
| ASTM D2467-2006 | 聚氯乙烯（PVC）塑料管配件的標準規范.表80 | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
| ASTM D2583-2007 | 用巴科爾壓痕器測定硬質塑料壓痕硬度的標準試驗方法 | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor |
| ASTM D2737-2003 | 聚乙烯(PE)塑料管標準規范 | Standard Specification for Polyethylene (PE) Plastic Tubing |
| ASTM D2741-1995(2005) | 聚乙烯塑料瓶對煙灰存積敏感性的標準試驗方法 | Standard Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation |
| ASTM D2765-2001(2006) | 交聯乙烯塑料的凝膠含量和膨脹系數的標準試驗方法 | Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics |
| ASTM D2842-2006 | 硬質泡沫塑料的吸水性用標準試驗方法 | Standard Test Method for Water Absorption of Rigid Cellular Plastics |
| ASTM D2911-1994(2005) | 塑料瓶的尺寸和公差標準規范 | Standard Specification for Dimensions and Tolerances for Plastic Bottles |
| ASTM D3002-2007 | 評定塑料涂覆層的標準指南 | Standard Guide for Evaluation of Coatings Applied to Plastics |
| ASTM D3005-1999(2004) | 耐低溫的氯乙烯塑料壓敏電絕緣帶 | Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape |
| ASTM D3006-1999(2004) | 氯乙烯塑料壓敏電絕緣帶 | Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape |
| ASTM D3012-2007 | 用爐內樣品旋轉器測定丙烯塑料的熱氧化穩定性的標準試驗方法 | Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven |
| ASTM D3014-2004a | 硬質熱固性泡沫塑料在垂直狀態時火焰高度、燃燒時間和質量損失的標準試驗方法 | Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position |
| ASTM D3045-1992(2003) | 無負荷塑料制品熱老化的標準實施規程 | Standard Practice for Heat Aging of Plastics Without Load |
| ASTM D3139-1998(2005) | 使用撓性彈性密封件的塑料壓力管用連接件標準規范 | Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals |
| ASTM D3164-2003 | 用拉伸負荷法測定膠粘劑粘接塑料搭接接頭剪切強度特性的標準試驗方法 | Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading |
| ASTM D3164M-2003 | 用拉伸負荷法測定膠粘劑粘接塑料搭接接頭剪切強度性能的試驗方法(米制) | Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading |
| ASTM D3212-2007 | 使用彈性柔性密封料制塑料排水管和污水管用接頭的標準規范 | Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals |
| ASTM D3261-2003 | 聚乙烯(PE)塑料管用端面熱熔接聚乙烯塑料配件標準規范 | Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing |
| ASTM D3291-1997(2003) | 壓力作用下聚氯乙烯塑料中增塑劑的兼容性 | Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression |
| ASTM D3576-2004 | 測定硬質泡沫塑料微孔尺寸的標準試驗方法 | Standard Test Method for Cell Size of Rigid Cellular Plastics |
| ASTM D3801-2006 | 測量在垂直狀態下固體塑料的對比滅火特性的標準試驗方法 | Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position |
| ASTM D3807-1998(2004) | 用拉力負荷法測定裂縫/撕裂中膠粘劑抗拉特性的測試方法(工程塑料之間) | Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics) |
| ASTM D3915-2006 | 壓力設備用塑料管和配件用硬質聚氯乙烯(PVC)和氯化聚氯乙烯(CPVC)化合物的標準規范 | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications |
| ASTM D3918-1996(2003) | 有關增強塑料擠拉制品的標準術語 | Standard Terminology Relating to Reinforced Plastic Pultruded Products |
| ASTM D3985-2005 | 用庫侖探測器測量氧氣通過塑料薄膜和薄板的傳送率的標準試驗方法 | Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor |
| ASTM D4065-2006 | 塑料的標準實施規程:動態機械特性:程序測定和報告 | Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures |
| ASTM D4092-2007 | 標準術語:塑料:動力機械性質 | Standard Terminology: Plastics: Dynamic Mechanical Properties |
| ASTM D4204-2006 | 循環連續測試用制備塑料薄膜樣品的標準實施規程 | Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study |
| ASTM D4263-1983(2005) | 塑料薄板法標示混凝土濕度的標準試驗方法 | Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method |
| ASTM D4329-2005 | 塑料熒光紫外線曝光的標準實施規程 | Standard Practice for Fluorescent UV Exposure of Plastics |
| ASTM D4350-2000(2005) | 塑料和填充料的腐蝕指數的標準試驗方法 | Standard Test Method for Corrosivity Index of Plastics and Fillers |
| ASTM D4364-2005 | 用集中自然光進行塑料的戶外加速老化試驗的標準實施規程 | Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight |
| ASTM D4396-2006 | 無壓設備用的塑料管和配件用硬質聚氯乙烯(PVC)和氯化聚氯乙烯(CPVC)化合物的標準規范 | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications |
| ASTM D4459-2006 | 室內用要求曝露于氙弧燈的塑料標準實施規程 | Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications |
| ASTM D4508-2006 | 塑料碎片沖擊強度的標準試驗方法 | Standard Test Method for Chip Impact Strength of Plastics |
| ASTM D4674-2002a | 暴露在室內熒光燈和透窗入室日光下的塑料顏色穩定性加速試驗的標準試驗方法 | Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments |
| ASTM D4754-1998(2003) | 使用液膜蒸餾器(FDA)移動元件進行塑料材料雙側液體提取的標準試驗方法 | Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell |
| ASTM D4802-2002 | 聚甲基丙烯酸酯丙烯酸塑料片標準規范 | Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet |
| ASTM D4812-2006 | 塑料的無凹口懸臂梁抗沖擊強度的標準試驗方法 | Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics |
| ASTM D4819-1996(2005) | 聚烯烴塑料制軟多孔材料標準規范 | Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics |
| ASTM D4976-2006 | 聚乙烯塑料模制材料和擠壓材料的標準規范 | Standard Specification for Polyethylene Plastics Molding and Extrusion Materials |
| ASTM D5023-2007 | 塑料的標準試驗方法:動態機械性能:彎曲(三點彎曲) | Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending) |
| ASTM D5024-2007 | 塑料的標準試驗方法:動態機械性能:壓縮 | Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression |
| ASTM D5025-2005 | 塑料材料的小型燃燒試驗用實驗室燃燒器的標準規范 | Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials |
| ASTM D5026-2006 | 塑料的標準試驗方法:動力機械性能:拉伸 | Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension |
| ASTM D5045-1999(2007)e1 | 塑料材料平面應變斷裂韌性和應變能量釋放率的標準試驗方法 | Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials |
| ASTM D5071-2006 | 暴露在氙氣燈的可光降解塑料的標準實施規程 | Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus |
| ASTM D5113-1997(2005) | 測定硬質多孔泡沫塑料的膠粘劑化學浸蝕的標準試驗方法 | Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam |
| ASTM D5203-2007 | 從消費后回收物中提取聚乙烯塑料模塑和壓塑材料的標準規范 | Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources |
| ASTM D5210-1992(2007) | 測定市政污穢沉積物現場的塑料材料厭氧生物降解能力的標準試驗方法 | Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge |
| ASTM D5245-1992(2005) | 微生物分析用清潔的實驗室玻璃器皿,塑料器皿和設備 | Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses |
| ASTM D5271-2002 | 活性污泥-污水處理系統中測定塑料材料需氧生物降解能力的標準試驗方法 | Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in an Activated-Sludge-Wastewater-Treatment System |
| ASTM D5338-1998(2003) | 在受控合成條件下測定塑料材料需氧的生物降解的標準試驗方法 | Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions |
| ASTM D5418-2007 | 塑料的標準試驗方法:動態機械性能:彎曲(雙懸臂梁) | Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam) |
| ASTM D542-2000(2006) | 透明有機塑料的折射指數的標準試驗方法 | Standard Test Method for Index of Refraction of Transparent Organic Plastics |
| ASTM D5420-2004 | 使用落錘沖擊(Gardner沖擊)法的硬質塑料扁平試樣耐沖擊性能的標準試驗方法 | Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) |
| ASTM D543-2006 | 塑料耐化學試劑性能的標準實施規程 | Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents |
| ASTM D5492-2006 | 丙烯塑料中二甲苯可溶物標準試驗方法 | Standard Test Method for Determination of Xylene Solubles in Propylene Plastics |
| ASTM D5526-1994(2002) | 加速土地填筑條件下塑料材料的厭氧生物降解測定的標準試驗方法 | Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions |
| ASTM D5571-1994(2005) | 額定容量不超過60加侖(227公升)的塑料密封頭圓筒的耐環境應力裂開(ESCR)的標準試驗方法 | Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity |
| ASTM D5573-1999(2005) | 纖維增強塑料(FRP)接合中失效方式分類的標準操作規程 | Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints |
| ASTM D5592-1994(2002)e1 | 使用塑料的工程設計中所要求的材料特性標準導則 | Standard Guide for Material Properties Needed in Engineering Design Using Plastics |
| ASTM D5628-2007 | 用下落投擲法(沖擊錘或下落塊)測試平板剛性塑料樣品抗沖擊性的標準試驗方法 | Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass) |
| ASTM D5630-2006 | 塑料含灰量的標準試驗方法 | Standard Test Method for Ash Content in Plastics |
| ASTM D570-1998(2005) | 塑料吸水率的標準試驗方法 | Standard Test Method for Water Absorption of Plastics |
| ASTM D5870-1995(2003) | 計算塑料牢固性參數指數的標準實施規程 | Standard Practice for Calculating Property Retention Index of Plastics |
| ASTM D5947-2006 | 固體塑料樣品物理尺寸的標準試驗方法 | Standard Test Methods for Physical Dimensions of Solid Plastics Specimens |
| ASTM D5951-1996(2002) | 毒性和復合質量試驗用固態廢物塑料的其它生物降解方法制備殘留固體的標準操作規程 | Standard Practice for Preparing Residual Solids Obtained After Biodegradability Standard Methods for Plastics in Solid Waste for Toxicity and Compost Quality Testing |
| ASTM D5988-2003 | 測定堆肥處理后的塑料或殘留塑料在土壤中有氧生物降解的標準試驗方法 | Standard Test Method for Determining Aerobic Biodegradation in Soil of Plastic Materials or Residual Plastic Materials After Composting |
| ASTM D6002-1996(2002)e1 | 評定環境降解塑料制成堆肥的標準指南 | Standard Guide for Assessing the Compostability of Environmentally Degradable Plastics |
| ASTM D6068-1996(2002)e1 | 測定塑料材料J-R曲線的標準試驗方法 | Standard Test Method for Determining J-R Curves of Plastic Materials |
| ASTM D6105-2004 | 粘結塑料的放電表面處理的應用標準規程 | Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding |
| ASTM D6109-2005 | 未增強和增強的塑料條材和相關產品柔韌特性的標準試驗方法 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products |
| ASTM D6112-1997(2005) | 塑料層材和型材壓縮的和柔性的蠕變和蠕變破裂的標準試驗方法 | Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes |
| ASTM D6117-1997(2005) | 塑料成材和形材內機械緊固件的標準試驗方法 | Standard Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes |
| ASTM D6226-2005 | 硬質多孔塑料的開孔含量的標準試驗方法 | Standard Test Method for Open Cell Content of Rigid Cellular Plastics |
| ASTM D6290-2005 | 塑料丸粒顏色測定的標準試驗方法 | Standard Test Method for Color Determination of Plastic Pellets |
| ASTM D6340-1998(2007) | 在含水或合成環境中測定放射性標記塑料材料的需氧生物降解性的標準試驗方法 | Standard Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment |
| ASTM D6341-1998(2005) | 測定-30到140°F(-34.4到60℃)之間塑料制材和型材線熱膨脹系數的標準試驗方法 | Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between -30 and 140&176F (-34.4 and 60&176C) |
| ASTM D635-2006 | 塑料在水平狀態時的燃燒速率或者燃燒蔓延程度及燃燒時間的標準試驗方法 | Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position |
| ASTM D6360-2007 | 塑料的閉合碳弧曝光標準實施規范 | Standard Practice for Enclosed Carbon-Arc Exposures of Plastics |
| ASTM D6395-2005 | 硬質塑料耐平面柔性沖擊性的標準試驗方法 | Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics |
| ASTM D6400-2004 | 可合成塑料的標準規范 | Standard Specification for Compostable Plastics |
| ASTM D648-2007 | 在撓曲負荷下塑料邊緣位置彎曲溫度的標準測試方法 | Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position |
| ASTM D6776-2002 | 在實驗室模擬陸地環境下測定放射性塑料物質厭氧生物降解性的標準試驗方法 | Standard Test Method for Determining Anaerobic Biodegradability of Radiolabeled Plastic Materials in a Laboratory-Scale Simulated Landfill Environment |
| ASTM D6864-2003ae1 | 實心彩色塑料壁板產品顏色和外觀保持性的標準規范 | Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products |
| ASTM D6865-2004 | 丙烯氰-苯乙烯-丙烯酸鹽和丙烯氰-EPDM-苯乙烯塑料和合金模制和擠壓材料的標準分類系統 | Standard Classification System for Acrylonitrile-Styrene-Acrylate (ASA) and Acrylonitrile-EPDM-Styrene (AES) Plastics and Alloys Molding and Extrusion Materials |
| ASTM D6868-2003 | 用作紙張和其他可合成基底覆層的生物可降解塑料的標準規范 | Standard Specification for Biodegradable Plastics Used as Coatings on Paper and Other Compostable Substrates |
| ASTM D6869-2003 | 用卡爾.費歇爾反應(碘水反應)進行塑料中水分的庫侖定量法及容量測定的標準試驗方法 | Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water) |
| ASTM D6954-2004 | 氧化和生物降解組合的環境中暴露和測試塑料降解的標準指南 | Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation |
| ASTM D7031-2004 | 木材-塑料復合產品的機械和物理性能的評估標準指南 | Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products |
| ASTM D7081-2005 | 海洋環境中不漂浮可生物降解塑料的標準規范 | Standard Specification for Non-Floating Biodegradable Plastics in the Marine Environment |
| ASTM D7191-2005 | 用相對濕度傳感器測定塑料中濕度的標準試驗方法 | Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor |
| ASTM D7210-2006 | 萃取聚烯烴塑料添加劑的標準實施規程 | Standard Practice for Extraction of Additives in Polyolefin Plastics |
| ASTM D7265-2006 | 氫熱塑料性能表的標準規范 | Standard Specification for Hydrogen Thermophysical Property Tables |
| ASTM D7309-2007a | 用微燃燒量熱儀測定塑料和其他固體材料的易燃特性用標準試驗方法 | Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry |
| ASTM D7310-2007 | 用光學傳感器進行塑料薄膜缺陷檢測和評定等級用標準指南 | Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors |
| ASTM D746-2007 | 用沖擊法測定塑料及彈性材料的脆化溫度的標準試驗方法 | Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
| ASTM D952-2002 | 薄板塑料和電絕緣材料粘結強度的標準試驗方法 | Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials |
| ASTM D957-2006 | 塑料生產用模型表面溫度測定的標準實施規程 | Standard Practice for Determining Surface Temperature of Molds for Plastics |
| ASTM E1067-2007 | 玻璃纖維增強塑料樹脂(FRP)罐/容器的聲排放檢驗用標準實施規程 | Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels |
| ASTM E2076-2005 | 用聲輻射檢驗玻璃纖維增強塑料風扇葉片的標準試驗方法 | Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
| ASTM F1094-1987(2005) | 用直接加壓分接抽樣閥和用預先消毒塑料包法對電子和微電子器件加工用水微生物監測的測試方法 | Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method |
| ASTM F1249-2006 | 利用調制紅外線傳感器的水蒸氣透過塑料薄膜和薄板的穿透率的標準試驗方法 | Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor |
| ASTM F1417-1992(2005) | 使用低壓空氣對塑料自流排水管道安裝驗收方法 | Standard Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air |
| ASTM F1733-2007 | 聚酰胺(PA)塑料管和軟管用熱熔接聚酰胺(PA)塑料配件的標準規范 | Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing |
| ASTM F1760-2001(2005)e1 | 含有再加工-再生材料的共擠壓聚氯乙烯無壓塑料管的標準規范 | Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content |
| ASTM F1866-2007 | 聚氯乙烯塑料壁厚40排水管和DWV加工配件的標準規范 | Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings |
| ASTM F1924-2005 | 外徑可控的聚乙烯配氣管用塑料機械配件的標準規范 | Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing |
| ASTM F2018-2000(2006) | 使用平應力拉伸樣品測定塑料老化時間的標準試驗方法 | Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens |
| ASTM F2021-2006 | 塑料虹吸式屋面排水系統的設計和安裝標準指南 | Standard Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems |
| ASTM F2045-2000(2006) | 直接和間接讀取液位的管形玻璃和塑料觀測指示器標準規范 | Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic |
| ASTM F2135-2001(2007) | 模制排水、污物和通風的短型塑料配件標準規范 | Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings |
| ASTM F2206-2002 | 熔接聚乙烯塑料管、配件、薄板、厚板或板坯的成品配件的標準規范 | Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock |
| ASTM F2261-2006 | 表40～80額定壓力氯乙烯(PVC)塑料管配件的標準試驗方法 | Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type |
| ASTM F2390-2007 | 有后工業回收成分的聚氯乙烯(PVC)塑料排水、廢棄物、通風孔(DWV)管和配件的標準規范 | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content |
| ASTM F2536-2006b | 安裝懸浮在高級厚板上塑料排氣管道的標準指南 | Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs |
| ASTM F2805-2009 | 多層熱塑性塑料和柔性鋼管及連接件用標準規范 | Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections |
| ASTM F493-2004 | 氯化聚氯乙烯(CPVC)塑料管及配件用溶劑粘結劑標準規范 | Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings |
| ASTM F689-1997(2004) | 有金屬套管的地上塑料氣體壓力管的溫度測定 | Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings |
| ASTM F711-2002(2007) | 火線工具用玻璃纖維增強塑料棒和管的標準規范 | Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools |
| ASTM F712-2006 | 工人防護用電絕緣塑料防護設備的標準試驗方法和規范 | Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers |
| ASTM F735-2006 | 用擺動沙袋法測定透明塑料及涂層抗磨損性的標準試驗方法 | Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method |
| ASTM F758-1995(2007)e1 | 高速路,飛機場及類似區域排水用光壁聚氯乙烯(PVC)塑料地下排水系統 | Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage |
| ASTM F877-2007 | 交聯聚乙烯(PEX)塑料冷熱水配置系統用標準規范 | Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems |
| ASTM F948-1994(2006) | 在恒定內流動壓力下塑料管道系統和組件損壞時間的標準試驗方法 | Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow |
| ASTM G29-1996(2002) | 塑料膜抗藻類腐蝕性的測定 | Standard Practice for Determining Algal Resistance of Plastic Films |
| UL 1316-1994 | 石油產品、酒精和酒精汽油混合物用玻璃纖維增強塑料地下貯罐 | (Glass-fiber-reinforced plastic underground storage tanks for petroleum products, alcohols, and alcohol-gasoline mixtures ) |
| UL 1821-2003 | 消防設備用熱塑性塑料噴水器的管及其管件 | (Thermoplastic sprinkler - Pipe and fittings for fire protection service) |
| UL 1853-1995 | 一次性易燃的和可燃液體用塑料容器 | (Nonreusable plastic containers for flammable and combustible liquids ) |
| UL 1887-1996 | 塑料噴水管的可見火焰和煙霧性能的燃燒試驗 | (Fire test of plastic sprinkler pipe for visible flame and smoke characteristics ) |
| UL 1975-1996 | 裝飾用泡沫塑料的燃燒試驗 | (Fire tests for foamed plastics used for decorative purposes ) |
| UL 2360-2000 | 半導體器件制造用塑料可燃性特征測定的試驗方法 | (Test methods for determining the combustability characteristics of plastics used in semi-conductor tool construction ) |
| UL 94-1996 | 設備和器具部件用塑料材料易燃性的試驗 | (Test for flammability of plastic materials for parts in devices and appliances ) |
| 編號 | 中文名稱 | 英文名稱 |