| 編號 | 中文名稱 | 英文名稱 |
|---|
| BS 2067-1953
| 絕緣材料的功率因子與電容率的測定(哈特遜和瓦德法)
| Determination of power-factor and permittivity of insulating materials (Hartshorn & Ward method)
|
| BS 2692-3-1990
| 1000V以上交流電熔斷器.第3部分:短路功率因數測定指南
| Fuses for voltages exceeding 1000 V a.c. Guide to the determination of short circuit power factor
|
| BS 4409-3-1982
| 螺旋輸送機.第3部分:傳動功率計算方法
| Screw conveyors - Method for calculating drive power
|
| BS 5000-11-1973
| 特種或專用旋轉電機.第11部分:小功率電動機和發電機
| Specification for rotating electrical machines of particular types or for particular applications - Small-power electric motors and generators
|
| BS 5410-1-1998
| 燃油規范.第1部分:輸出功率小于等于45KW的環流供暖及熱水供應鍋爐裝置
| Code of practice for oil firing - Installations up to 45 kW output capacity for space heating and hot water supply purposes
|
| BS 5410-2-1978
| 燒油慣例.第2部分:輸出功率大于等于45kW的空間加熱、熱水和蒸汽供應設備
| Code of practice for oil firing - Installations of 45 kW and above output capacity for space heating, hot water and steam supply services
|
| BS 5514-7-1996
| 往復式內燃機性能.第7部分:發動機功率規程
| Reciprocating internal combustion engines: performance - Codes for engine power
|
| BS 5654-2-1979
| 直流輸出穩壓電源.第2部分:額定功率與性能規定方法
| Stabilized power supplies, d.c. output - Method of specifying rating and performance
|
| BS 5760-10.5-1993
| 系統、設備和部件可靠性.第10部分:可靠性試驗指南.第5節:成功率合格試驗方案
| Reliability of systems, equipment and components - Guide to reliability testing - Compliance test plans for success ratio
|
| BS 5944-4-1984
| 液壓動力系統和部件空氣噪音測量.第4部分:流量和壓力控制閥聲功率級測定方法
| Measurement of airborne noise from hydraulic fluid power systems and components - Method of determining sound power levels from valves controlling flow and pressure
|
| BS 5944-5-1985
| 液壓系統和部件氣動噪音測量.第5部分:使消聲室測定液壓泵聲功率等級的簡易方法
| Measurement of airborne noise from hydraulic fluid power systems and components - Simplified method of determining sound power levels from pumps using an anechoic chamber
|
| BS 5986-1980
| 熱輸入功率為60kW到2MW的燃氣對流式加熱器的電安全性和性能規范
| Specification for electrical safety and performance of gas fired space heating appliances with inputs 60 kW to 2 MW
|
| BS 6347-2-1983
| 農用拖拉機性能評定.第2部分:液壓功率和提升能力測定方法
| Performance assessment of agricultural tractors - Methods for determination of hydraulic power and lifting capacity
|
| BS 6347-7-1993
| 農用拖拉機性能評定.第7部分:軸功率測定方法
| Performance assessment of agricultural tractors - Method for determination of axle power
|
| BS 6583-1985
| 中央通風裝置風機區額定功率的體積測定試驗方法(包括功率分級指南)
| Methods for volumetric testing for rating of fan sections in central station air handling units (including guidance on rating)
|
| BS 6590-1985
| 機械的開式壓力機的額定功率和尺寸規范
| Specification for capacity ratings and dimensions of power presses, mechanical open front type
|
| BS 6644-2005
| 額定輸入功率在70 kW(凈功率)和1.8 MW(凈功率)之間(2類和3類家用煤氣)的燃氣熱水鍋爐的安裝規范
| Specification for Installation of gas-fired hot water boilers of rated inputs between 70 kW (net) and 1.8 MW (net) (2nd and 3rd family gases)
|
| BS 6798-2000
| 額定輸入功率不超過70kW的燃氣鍋爐的安裝規范
| Specification for installation of gas-fired boilers of rated input not exceeding 70 kW net
|
| BS 6880-1-1988
| 輸出功率大于45kW的低溫熱水加熱系統實用規程.基本原理和設計
| Code of practice for low temperature hot water heating systems of output greater than 45 kW - Fundamental and design considerations
|
| BS 6880-2-1988
| 輸出功率大于45kW的低溫熱水加熱系統實用規程.設備選擇
| Code of practice for low temperature hot water heating systems of output greater than 45 kW - Selection of equipment
|
| BS 6880-3-1988
| 輸出功率大于45kW的低溫熱水加熱系統實用規程.安裝、交付使用和維護
| Code of practice for low temperature hot water heating systems of output greater than 45 kW - Installation, commissioning and maintenance
|
| BS 6911-4-1998
| 運土機械試驗.發動機試驗法規.凈功率
| Testing earth-moving machinery - Engine test code - Net power
|
| BS 6999-1989
| 最大輸出功率為45kW的固體燃料設備用搪瓷低碳鋼煙道管、其他部件和附件的規范
| Specification for vitreous-enamelled low-carbon-steel flue pipes , other components and accessories for solid-fuel-burning appliances with a rated output of 45 kW
|
| BS 7036-4-1996
| 行人用動力門安全性實用規程.低功率旋轉門
| Code of practice for safety at powered doors for pedestrian use - Low energy swing doors
|
| BS 7698-8-1996
| 往復式內燃機驅動的交流發電機組.低功率發電機組要求和試驗
| Reciprocating internal combustion engine driven alternating current generating sets - Requirements and tests for low-power generating sets
|
| BS 7821-4-1995
| 小于36KV設備的帶有最高電壓值50Hz、50-2500KVA三相油浸式配電變壓器.載有非正弦電流的變壓器額定功率測定
| Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Determination of the power rating of a transformer loaded with non-sinusoidal currents
|
| BS 7844-3-1998
| 小于36KV設備的最高電壓值為50Hz、100-2500KVA三相干式配電變壓器.負載非正弦電流的變壓器額定功率的測定
| Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Determination of the power rating of a transformer loaded with non-sinusoidal current
|
| BS 7854-3-1998
| 機械振動.通過測量非旋轉零件對機械振動的評估.現場測量標稱功率在15kW以上、標稱轉速在120轉/分和15000轉/
| Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min when measured in situ
|
| BS 7854-6-1996
| 機械振動.對非旋轉零件測量的機械振動評估.額定功率大于100KW的往復式機械
| Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Reciprocating machines with power ratings above 100 kW
|
| BS 7856-1996
| 交流電設計實用規程,有功功率(1級和2級)瓦時表
| Code of practice for design of alternating current, watthour meters for active energy (classes 1 and 2)
|
| BS 848-2.4-2004
| 工業用風扇.標準化實驗室條件下的風扇聲功率級的測定.聲強法
| Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Sound intensity method
|
| BS 89-3-1990
| 直接指示模擬電工測量儀表及其輔助設備.第3部分:瓦特表和無功功率表的特殊要求規范
| Direct acting indicating analogue electrical measuring instruments and their accessories - Specification for special requirements for wattmeters and varmeters
|
| BS 89-5-1990
| 直接指示模擬電工測量儀表及其輔助設備.第5部分:相位表、功率因數表和同步指示器的特殊要求規范
| Direct acting indicating analogue electrical measuring instruments and their accessories - Specification for special requirements for phase meters, power factor meters and synchroscopes
|
| BS 9133 N001 to 003-1975
| 單旋非線繞小功率旋轉電位器詳細規范.與電阻元件絕緣的主軸、主軸和密封儀表板或容器、主軸和密封儀表板.全
| Detail specification for single turn low power non-wirewound rotary potentiometers - Spindle insulated from resistance element, spindle and panel sealed or container, spindle and panel sealed - Full assessment level
|
| BS 9133-1973
| 經質量評定的單匝小功率旋轉式電位器詳細規范編制規則
| Rules for the preparation of detail specifications for single turn low power rotary potentiometers of assessed quality
|
| BS 9300 C379-388-1971
| 安裝于硅螺桿上的大功率整流器二極管詳細規范
| Detail specifications for silicon stud mounted, power rectifier diodes
|
| BS 9364 N007 and N009-1978
| 小功率硅N-P-N型開關晶體管詳細規范.20V、平面外延、額定環境條件、密封封裝.全面附加評定級
| Detail specification for low power silicon n-p-n switching transistors - 20 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level
|
| BS 9364 N008 and N010-1978
| 小功率硅N-P-N型開關晶體管詳細規范.20V、平面外延、額定環境條件、密封封裝(長引線型).全面附加評定級
| Detail specification for low power silicon n-p-n switching transistors - 20 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version) - Full plus additional assessment level
|
| BS 9364 N011-1978
| 小功率硅P-N-P型開關晶體管詳細規范.65V、平面外延、額定環境條件、密封封裝、全面附加評定級
| Detail specification for low power silicon p-n-p switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level
|
| BS 9364 N012-1978
| 小功率硅P-N-P型開關晶體管詳細規范.65V、平面外延、額定環境條件、密封封裝(長引線型).全面和附加評估級
| Detail specification for low power silicon p-n-p switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version) - Full plus additional assessment level
|
| BS 9364 N013-1979
| 小功率硅P-N-P型開關晶體管詳細規范.25V、平面外延、額定環境條件、密封封裝、全面附加評定級
| Detail specification for low power silicon p-n-p switching transistors - 25 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level
|
| BS 9364 N016-1979
| 小功率硅P-N-P型開關晶體管詳細規范.65V、平面外延、額定環境條件、密封封裝.全面附加評定級
| Detail specification for low power silicon n-p-n switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level
|
| BS 9364 N017-1979
| 小功率硅n-p-n型開關晶體管詳細規范.65V、平面外延、額定環境條件、密封封裝(長引線型).全面附加評定級
| Detail specification for low power silicon n-p-n switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version) - Full plus additional assessment level
|
| BS 9925-03.0-1988
| 電子元器件用經質量評估的協調體系.通信用電感器和變壓器磁心.第3部分:分規范:功率用變壓器和扼流圈的磁氧
| Harmonized system of quality assessment for electronic components - Inductor and transformer cores for telecommunications - Sectional specification: Magnetic oxide cores for transformers and chokes for power applications
|
| BS 9925-03.01-1988
| 電子元器件用質量評估協調體系.通信用電感器和變壓器磁心.第3部分:空白詳細規范:功率用變壓器和扼流圈磁氧
| Harmonized system of quality assessment for electronic components - Inductor and transformer cores for telecommunications - Blank detail specification: magnetic oxide cores for transformers and chokes for power applications - Assessment level A
|
| BS 9940-01.0-1983
| 電子元器件用質量評估協調體系.電子設備用固定電阻器. 第1部分:分規范:低功率非線繞固定電阻器
| Harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Sectional specification: fixed low power non-wirewound resistors
|
| BS 9940-01.01-1983
| 電子元器件用質量評估協調體系.電子設備用固定電阻器.第1部分:空白詳細規范:低功率非線繞固定電阻器.第1節:
| Harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Blank detail specification: fixed low power non-wirewound resistors - Assessment level E
|
| BS AU 215-3-1988
| 動力輸出裝置.第3部分:商用道路車輛安裝在尾部的功率輸出裝置的連接件尺寸規范
| Power take offs (PTOs) - Specification for dimensions of connections for rear mounted power take offs for commercial road vehicles
|
| BS CECC 25300-1981
| 電子元器件用質量評估協調體系.分規范.功率用磁性氧化物磁心
| Harmonized system of quality assessment for electronic components: sectional specification: magnetic oxide cores for power applications
|
| BS CECC 40101 019-1977
| 固定小功率非繞線絕緣電阻器詳細規范.螺旋形切割金屬氧化物薄膜.全面評定級
| Detail specification for fixed low power non-wirewound insulated resistors - Metal oxide film, helically cut - Full assessment level
|
| BS CECC 41200-1979
| 電子元器件用質量評估協調體系.分規范.功率電位器
| Harmonized system of quality assurance for electronic components: sectional specification: power potentiometers
|
| BS CECC 41201-1978
| 電子元器件用質量評估協調體系規范.空白詳細規范:功率電位器(S級評估)
| Specification for harmonized system of quality assessment for electronic components - Blank detail specification: power potentiometers (assessment level S)
|
| BS CECC 41202-1978
| 電子元器件用質量評估協調體系規范.空白詳細規范:功率電位器(M級評估)
| Specification for harmonized system of quality assessment for electronic components - Blank detail specification: power potentiometers (assessment level M)
|
| BS CECC 41300-1979
| 電子元器件用質量評估協調體系.分規范.小功率單圈旋轉電位器
| Harmonized system of quality assessment for electronic components - Sectional specification: low power single-turn rotary potentiometers
|
| BS CECC 41301-1979
| 電子元器件用質量評估協調體系規范.空白詳細規范:小功率單圈旋轉電位器(S級評估)
| Specification for harmonized system of quality assessment for electronic components - Blank detail specification: low power single turn rotary potentiometers (assessment level S)
|
| BS CECC 41302-1979
| 電子元器件用質量評估協調體系規范.空白詳細規范:小功率單圈旋轉電位器(M級評估)
| Specification for harmonized system of quality assessment for electronic components - Blank detail specification: low power single turn rotary potentiometers (assessment level M)
|
| BS CECC 45004-1977
| 電子元器件用質量評估協調體系規范.空白詳細規范:盤形密封功率管
| Specification for harmonized system of quality assessment for electronic components - Blank detail specification: disc seal power tubes
|
| BS CECC 90103-1990
| 電子元件質量評定的協調系統規范.類規范.54LS、64LS、74LS、84LS 系列的 數字式集成TTL小功率SCHOTTKY電路
| Specification for harmonized system of quality assessment for electronic components. Family specification: digital integrated TTL low power SCHOTTKY, circuits, series 54LS, 64LS, 74LS, 84LS
|
| BS DD ENV 12102-1997
| 帶電驅動壓縮機的空調、加熱泵和除濕器.空氣噪聲的測量.聲功率水平的測定
| Air conditioners, heat pumps and dehumidifiers with electrically driven compressors - Measurement of airborne noise - Determination of the sound power level
|
| BS DD IEC/TS 61400-14-2006
| 風輪機.表面聲功率級和音調值聲明
| Wind turbines - Declaration of apparent sound power level and tonality values
|
| BS E9065-1976
| 電子元器件用質量評估協調體系規范.空白詳細規范.陽極消耗可達1kW的小功率發射管
| Specification for harmonized system of quality assessment for electronic components - Blank detail specification: small power transmitting tubes of anode dissipation up to 1 kW
|
| BS EN 1020-1998
| 借助風扇傳輸燃氣和/或燃燒產物的空間加熱凈加熱輸入功率不超過300KW的非家用燃氣強制對流空氣加熱器
| Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, incorporating a fan to assist transportation of combustion air and/or combustion products
|
| BS EN 12736-2002
| 電力驅動的道路車輛.用運載工具車上帶的充電器充電過程中車輛在空中發出的噪聲.聲功率水平的測定
| Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level
|
| BS EN 135001-1978
| 電子元器件質量保證協調體系.空白詳細規范.功率小于500瓦的C、W功率行波管放大器
| Specification for harmonized system of quality assessment for electronic components - Blank detail specification: CW power amplifier travelling wave tubes up to 500 watts
|
| BS EN 140101-1997
| 電子元器件質量評定協調體系.低功率非線繞固定電阻器空白詳細規范(評定等級 S)
| Harmonized system of quality assessment for electronic components - Blank detail specification: fixed low power non-wire wound resistors (assessment level S)
|
| BS EN 140102-1996
| 電子元器件質量評定協調體系.空白詳細規范:固定低功率非線繞電阻器(評定等級M)
| Harmonized system of quality assessment for electronic components - Blank detail specification: fixed low power non-wirewound resistors (assessment level M)
|
| BS EN 140103-1996
| 電子元器件質量評定協調體系.空白詳細規范:固定低功率非線繞電阻器(評定等級P)
| Harmonized system of quality assessment for electronic components - Blank detail specification - Fixed low power non-wirewound resistors (Assessment level P)
|
| BS EN 140104-1996
| 電子元器件質量評定協調體系.空白詳細規范:固定低功率非線繞電阻器(評定等級SB和SC)
| Harmonized system of quality assessment for electronic components - Blank detail specification: fixed low power non-wirewound resistors (Assessment levels SB and SC)
|
| BS EN 140211-1995
| 電氣元器件質量評定協調體系規范.空白詳細規范.固定功率電阻.能力鑒定
| Specification for harmonized system of quality assessment for electronic components - Blank detail specification: fixed power resistors - Capability approval
|
| BS EN 140400-2004
| 電子元器件質量評定協調系統.分規范.低功率表面安裝的固定電阻器
| Harmonized system of quality assessment for electronic components - Sectional specification - Fixed low power surface mount (SMD) resistors
|
| BS EN 140401-2002
| 空白詳細規格:低功率非線繞表面安裝的固定電阻器
| Blank detail specification - Fixed low power non wire-wound surface mount (SMD) resistors
|
| BS EN 140401-801-2002
| 詳細規范.低功率非線繞表面安裝電阻器.矩形. 0.1、0.25、0.5和1級別的穩定性
| Detail specification - Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,1; 0,25; 0,5 ; 1
|
| BS EN 140401-802-2002
| 詳細規范.低功率非線繞表面安裝的固定電阻器.矩形.1和2級別的穩定性
| Detail Specification: Fixed low power non wire-wound surface mount(SMD) resistors - Rectangular - Stability classes 1; 2
|
| BS EN 140401-803-2002
| 詳細規范.低功率非線繞表面安裝的固定電阻器.矩形.0.05、0.1、0.25、0.5、1和2級別的穩定性
| Detail specification - Fixed low power non wire-wound surface mount (SMD) resistors - Cylindrical - Stability classes 0,05; 0,1; 0 ,25; 0,5; 1; 2
|
| BS EN 140402-1998
| 電子元器件質量評定協調系統.空白詳細規范:低功率線繞表面安裝(SMD) 固定電阻器
| Harmonized system of quality assessment for electronic components - Blank detail specification: fixed low power wire wound surface mounting (SMD) resistors
|
| BS EN 140402-801-2005
| 詳細規范:固定低功率線繞表面安裝(SMD)電阻器.矩形.穩定性等級0.5、1、2
| Detail specification: Fixed low power wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2
|
| BS EN 190103-1990
| 電子元器件質量評定協調體系規范.系列規范:數字集成TTL小功率肖特基電路系列54LS、64LS、74LS、84LS
| Specification for harmonized system of quality assessment for electronic components - Family specification: digital integrated TTL low power SCHOTTKY, circuits, series 54LS, 64LS, 74LS, 84LS
|
| BS EN 190106-1987
| 電子元器件質量評定協調體系規范.系列規范:TTL改進的小功率肖特基數字集成電路系列54ALS、74ALS
| Specification for harmonized system of quality assessment for electronic components - Family specification - TTL advanced low power SCHOTTKY digital integrated circuits series 54 ALS, 74 ALS
|
| BS EN 2591-603-2002
| 電氣和光學連接元件.試驗方法.光學元件.功率分配的變化
| Elements of electrical and optical connection - Test methods - Optical elements - Change of power distribution
|
| BS EN 29775-1993
| 小船.15KW-40KW功率單外舷電動機遠程操縱系統
| Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power
|
| BS EN 45510-2-4-2000
| 發電站設備采購指南.電氣設備.高功率靜態轉換器.第4部分:高功率靜態轉換器
| Guide for the procurement of power station equipment - Electrical equipment - High power static convertors - Section 4: High power static convertors
|
| BS EN 50294-2002
| 鎮流管電路的全部輸入功率的測量方法
| Measurement method of total input power of ballast-lamp circuits
|
| BS EN 50324-2-2002
| 陶瓷材料和元件的壓電性能.測量方法.低功率
| Piezoelectric properties of ceramic materials and components - Methods of measurement - Low power
|
| BS EN 50324-3-2002
| 陶瓷材料和元件的壓電性能.測量方法.高功率
| Piezoelectric properties of ceramic materials and components - Methods of measurement - High power
|
| BS EN 50328-2003
| 鐵路設施.固定式裝置.變電站用電子功率變換器
| Railway applications - Fixed installations - Electronic power convertors for substations
|
| BS EN 50371-2002
| 證明與暴露在電磁場(10 MHz - 300 GHz)中人體有關的有基本限制的低功率電子和電氣設備合格的通用標準.一般
| Generic standard to demonstrate the compliance of low power electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (10 MHz - 300 GHz) - General public
|
| BS EN 55016-1-3-2005
| 無線電干擾和抗擾測量儀器和方法規范.無線電干擾和抗擾測量儀器.輔助設備.干擾功率
| Specification for radio disturbance and immunity measuring apparatus and methods - Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power
|
| BS EN 55016-2-2-2005
| 無線電干擾和抗擾測量儀器和方法規范.干擾和抗擾測量方法.干擾功率測量
| Specification for radio disturbance and immunity measuring apparatus and methods - Methods of measurement of disturbances and immunity - Measurement of disturbance power
|
| BS EN 60204-11-2001
| 機械的安全性.機器的電氣設備.電壓大于1000V交流電或1500V直流電和功率不超過36KV的高壓設備的要求
| Safety of machinery - Electrical equipment of machines - Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV
|
| BS EN 60268-16-2003
| 音響系統設備.用語音傳輸系數測定語音清晰度的目標額定功率
| Sound system equipment - Objective rating of speech intelligibility by speech transmission index
|
| BS EN 60654-2-1980
| 工業過程測量和控制設備工作條件.功率
| Operating conditions for industrial-process measurement and control equipment - Power
|
| BS EN 60835-3-6-1997
| 數字微波無線電發射系統使用設備測量方法.衛星地面站測量.大功率放大器
| Methods of measurement for equipment used in digital microwave radio transmission systems - Measurements on satellite earth stations - High-power amplifiers
|
| BS EN 61000-4-30-2003
| 電磁兼容性(EMC).試驗和測量技術.功率等級測量方法
| Electromagnetic compatibility (EMC) - Testing and measurement techniques - Power quality measurement methods
|
| BS EN 61040-1993
| 激光輻射功率和能量探測器、儀表和設備規范
| Specification for power and energy measuring detectors, instruments and equipment for laser radiation
|
| BS EN 61161-1995
| 液體頻率范圍為0.5MHz-25MHz的超聲波功率測量規范
| Specification for ultrasonic power measurement in liquids in the frequency range 0.5 MHz to 25 MHz
|
| BS EN 61173-1995
| 光電功率發生系統過壓保護導則
| Overvoltage protection for photovoltaic (PV) power generating systems - Guide
|
| BS EN 61277-1998
| 地面光電功率發生裝置.總則和指南
| Terrestial photovoltaic (PV) power generating systems - General and guide
|
| BS EN 61280-1-1-1998
| 光纖放大器.基本光譜分析儀.單模光纖電纜用發射機光輸出功率測量
| Optical fibre amplifiers.Basic spectrum analyzers - Transmitter output optical power measurement for single-mode optical fibre cable
|
| BS EN 61290-1-3-2005
| 光學放大器.試驗方法.功率和增益參數.光功率計法
| Optical amplifiers — Test methods — Part 1-3: Power and gain parameters — Optical power meter method |
| BS EN 61300-3-31-2003
| 光纖互連器件和無源元件.基本試驗和測量程序.檢驗和測量.光纖光源的耦合功率比測量
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Coupled power ratio measurement for fibre optic sources
|
| BS EN 61307-2006
| 工業微波加熱裝置.輸出功率測定的試驗方法
| Industrial microwave heating installations - Test methods for the determination of power output
|
| BS EN 61315-2006
| 光纖功率計校正
| Calibration of fibre-optic power meters
|
| BS EN 61523-1-2002
| 延遲計算和功率計算標準.集成電路延遲計算和功率計算系統
| Delay and power calculation standards - Integrated circuit delay and power calculation systems
|
| BS EN 61523-2-2002
| 延遲計算和功率計算標準.CMOS集成電路子程序庫.預布局延遲計算規范
| Delay and power calculation standards - Pre-layout delay calculation specification for CMOS ASIC libraries
|
| BS EN 61580-8-1997
| 波導管測量方法.波導管功率保持性
| Methods of measurement for waveguides - Waveguide power holding capability
|
| BS EN 61683-2000
| 光電系統.電功率調節器.效能測量程序
| Photovoltaic systems - Power conditioners - Procedure for measuring efficiency
|
| BS EN 61803-1999
| 高壓直接電流(HVDC)轉換站功率損失的測定
| Determination of power losses in high-voltage direct current (HVDC) converter stations
|
| BS EN 61922-2003
| 高頻感應加熱裝置.測定發生器功率輸出的試驗方法
| High-frequency induction heating installations - Test methods for the determination of power output of the generator
|
| BS EN 62018-2004
| 信息技術設備的功率消耗.測量方法
| Power consumption of information technology equipment - Measurement methods
|
| BS EN 621-1998
| 不用風扇傳輸燃氣和/或燃燒產物的空間加熱凈加熱輸入功率不超過300KW的非家用燃氣強制對流空氣加熱器
| Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
|
| BS EN 778-1998
| 不用風扇傳輸燃氣和/或燃燒產物的空間凈加熱輸入功率不超過70kW的家用燃氣強制對流空氣加熱器
| Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
|
| BS EN ISO 11203-1996
| 聲學.機械裝置及設備發出的噪聲.在工作地點和其它試驗場所從聲功率級測量聲壓級
| Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
|
| BS EN ISO 11592-2001
| 小于8米長艇身的小艇.最大推動功率的測定
| Small craft less than 8 m length of hull - Determination of maximum propulsion power rating
|
| BS EN ISO 3741-2000
| 聲學.用聲壓測定噪聲源聲音功率級.混響室內的精密方法
| Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms
|
| BS EN ISO 3743-1-1994
| 聲學.噪聲源聲功率級的測定.在混響聲場中小聲源和移動聲源的工程測量方法.第1部分:硬墻試驗室的比較分析法
| Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Comparison for hard-walled test rooms
|
| BS EN ISO 3743-2-1995
| 聲學.噪聲源的聲功率級測定.在混響場中對可移動聲源的工程測量方法.用專用混響試驗室的測量方法
| Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Methods for special reverberation test rooms
|
| BS EN ISO 3744-1994
| 聲學.用聲壓力測定噪聲源的聲功率級.在聲音反射平面上基本自由場中的測量方法
| Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane
|
| BS EN ISO 3745-2003
| 聲學.用聲壓法測定噪聲源聲功率級.消聲室和半消聲室精密法
| Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for anechoic and hemi-anechoic rooms
|
| BS EN ISO 3746-1996
| 聲學.用噪聲壓力測定噪聲功率級.在反射平面上利用包封測量表面的測量法
| Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane
|
| BS EN ISO 3747-2000
| 聲學.聲壓法測定噪聲源的聲功率級.現場比較法
| Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method in situ
|
| BS EN ISO 5135-1999
| 聲學.通過混響室測定空調終端設備、空調終端裝置、阻尼器和閥門噪音的聲音功率級
| Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room
|
| BS EN ISO 5136-2003
| 聲學.風機和其他鼓風裝置吹到管道中的聲功率的測定.管道法
| Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method
|
| BS EN ISO 6185-1-2001
| 充氣艇.電機最大額定功率為4.5KW的小艇
| Inflatable boats - Boats with a maximum motor power rating of 4,5 kW
|
| BS EN ISO 6185-2-2001
| 充氣艇.電動機最大額定功率為4.5KW至15KW的小艇
| Inflatable boats - Boats with a maximum motor power rating of 4.5 kW to 15 kW inclusive
|
| BS EN ISO 6185-3-2001
| 充氣艇.最大電動機功率為15KW及其以上的小氣艇
| Inflatable boats - Boats with maximum motor power rating of 15 kW and greater
|
| BS EN ISO 6926-2000
| 聲學.聲功率級測定用基準聲源的性能和校正要求
| Acoustics - Requirements for the performance and calibration of reference sound sources for the determination of sound power levels
|
| BS EN ISO 9614-1-1993
| 聲學.利用聲音強度測定噪聲源功率級.第1部分:離散點測量
| Acoustics - Determination of sound power levels of noise sources using sound intensity - Measurement at discrete points
|
| BS EN ISO 9614-2-1997
| 聲學.利用聲強度對噪聲源聲功率級別的測定.使用掃描測量法
| Acoustics - Determination of sound power levels of noise sources using sound intensity - Measurement by scanning
|
| BS EN ISO 9614-3-2002
| 聲學.利用聲強度對噪聲源聲功率級別進行的測定.使用掃描精確測量法
| Acoustics - Determination of sound power levels of noise sources using sound intensity - Precision method for measurement by scanning
|
| BS G 248-1993
| 混合式遙控功率控制器規范.一般要求
| Specification for hybrid remote power controllers - General requirements
|
| BS G 249-1993
| 固態遙控功率控制器規范.一般要求
| Specification for solid-state remote power controllers - General requirements
|
| BS IEC 60747-8-2001
| 分立半導體器件和集成電路.場效應晶體管.電源轉換場效應晶體管測量方法中附加功率、特性和amds
| Discrete semiconductor devices and integrated circuits - Field-effect transistors - Additional ratings and characteristics and amds in the measuring methods for power switching field effect transistors
|
| BS IEC 61523-3-2004
| 延遲和功率計算標準.電子設計過程用標準延遲格式(SDF)
| Delay and power calculation standards - Standard delay formaty (SDF) for the electronic design process
|
| BS ISO 13347-1-2004
| 工業風扇.標準實驗室條件下風扇聲功率級的測定.總論
| Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - General overview
|
| BS ISO 13347-2-2004
| 工業風扇.標準實驗室條件下風扇聲功率級的測定.混響室法
| Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Reverberant room method
|
| BS ISO 13347-3-2004
| 工業風扇.標準實驗室條件下風扇聲功率級的測定.包絡面法
| Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Enveloping surface method
|
| BS ISO 13347-4-2004
| 工業用風扇.標準化實驗室條件下風扇聲功率級的測定.聲強法
| Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Sound intensity method
|
| BS ISO 14396-2002
| 往復式內燃機.內燃機功率的測定和內燃機功率測量的試驗方法.符合ISO 8178的廢氣排放試驗的補充要求
| Reciprocating internal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178
|
| BS ISO 15550-2002
| 內燃機.測量發動機功率的測定方法.總要求
| Internal combustion engines - Determination and method for the measurement of engine power - General requirements
|
| BS ISO 16902-1-2003
| 液壓傳動.用聲強法測定聲功率級的試驗規程.工程法.泵
| Hydraulic fluid power - Test code for the determination of sound power levels using sound intensity techniques - Engineering method - Pumps
|
| BS ISO 2534-1998
| 道路車輛.發動機試車法規.總功率
| Road vehicles - Engine test code - Gross power
|
| BS ISO 3046-1-2002
| 往復式內燃機.性能.功率、燃料消耗量和潤滑油消耗量和試驗方法說明.通用內燃機的附加要求
| Reciprocating internal combustion engines - Performance - Declarations of power, fuel and lubricating oil consumptions, and test methods - Additional requirements for engines for general use
|
| BS ISO 6926-2000
| 聲學.聲功率級測定用基準聲源的性能和校正要求
| Acoustics - Requirements for the performance and calibration of reference sound sources for the determination of sound power levels
|
| BS ISO 7919-2-2002
| 非往復式機器的機械振動.旋轉軸的測量和評定標準.陸地安裝,功率超過50MW,正常運轉速度為1500r/min、1800r/m
| Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
|
| BS ISO 8528-1-2006
| 往復式內燃機驅動的交流發電機組.應用、額定功率和性能
| Reciprocating internal combustion engine driven alternating current generating sets - Application, ratings and performance
|
| BS QC 400102-1992
| 電子元器件質量評估協調體系規范.電子設備用固定電阻器.空白詳細規范.低功率非線繞固定電阻器.評估等級F
| Specification for harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Blank detail specification - Fixed low-power non-wirewound resistors - Assessment level F
|
| BS QC 400200-1983
| 電子元器件質量評估的協調體系.電氣設備用固定電阻.分規范:固定式功率電阻器
| Harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Sectional specification: fixed power resistors
|
| BS QC 400201-1984
| 電子元件質量評估協調系統.電氣設備用固定電阻器.空白細則規范:固定式功率電阻器.評估等級E
| Specification for harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Blank detail specification: fixed power resistors - Assessment level E
|
| BS QC 400202-1992
| 電子元器件質量評估協調體系規范.電子設備用固定電阻器.空白詳細規范.固定式功率電阻器.評估等級F
| Specification for harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Blank detail specification - Fixed power resistors - Assessment level F
|
| BS QC 400203-1993
| 電子設備用固定電阻器規范.空白詳細規范.固定功率電阻器、散熱片型.評估等級H
| Specification for fixed resistors for use in electronic equipment - Blank detail specification - Fixed power resistors, heat-sink types - Assessment level H
|
| BS QC 410200-1992
| 電子元器件質量評估協調體系.電子設備用電位器.單匝旋轉功率電位器分規范
| Harmonized system of quality assessment for electronic components - Potentiometers for use in electronic equipment - Sectional specification for single-turn rotary power potentiometers
|
| BS QC 410203-1992
| 電子元器件質量評估協調體系規.電子設備用電位器.空白詳細規范:單匝旋轉功率電位計.評估等級E
| Specification for harmonized system of quality assessment for electronic components - Potentiometers for use in electronic equipment - Blank detail specification: single-turn rotary power potentiometers - Assessment level E
|
| BS QC 410204-1992
| 電子元器件質量評估協調體系規.電子設備用電位器.空白詳細規范:單匝旋轉功率電位計.評估等級F
| Specification for harmonized system of quality assessment for electronic components - Potentiometers for use in electronic equipment - Blank detail specification: single-turn rotary power potentiometers - Assessment level F
|
| BS QC 410300-1992
| 電子元器件質量評估協調體系.電子設備用電位器.單匝旋轉低功率線繞和非線繞電位器分規范
| Harmonized system of quality assessment for electronic components - Potentiometers for use in electronic equipment - Sectional specification for single-turn rotary low-power wirewound and non-wirewound potentiometers
|
| BS QC 410301-1992
| 電子元器件質量評估協調體系規.電子設備用電位計.空白詳細規范:單匝旋轉功率電位計.評估等級E
| Specification for harmonized system of quality assessment for electronic components - Potentiometers for use in electronic equipment - Blank detail specification: single-turn rotary low-power potentiometers - Assessment level E
|
| BS QC 410302-1992
| 電子元器件質量評估協調體系規.電子設備用電位計.空白詳細規范:單匝旋轉低功率電位計.評估等級F
| Specification for harmonized system of quality assessment for electronic components - Potentiometers for use in electronic equipment - Blank detail specification: single-turn rotary low-power potentiometers - Assessment level F
|
| BS QC 750106-1993
| 電子元器件質量評估協調體系規范.半導體分立器件.空白詳細規范.用于外殼額定功率放大器應用的場效應晶體管
| Specification for harmonized system of quality assessment for electronic components - Semiconductor discrete devices - Blank detail specification - Field-effect transistors for case-rated power amplifier applications
|
| BS QC 750112-1988
| 電子元器件質量評估協調體系.空白詳細規范.半導體器件.分立器件.場效應晶體管.功率達5W和1GHz的單柵場效應
| Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Semiconductor devices - Discrete devices - Field-effect transistors - Blank detail specification for single-gate field-effect transistors, up to 5 W and 1 GHz
|
| 編號 | 中文名稱 | 英文名稱 |
|---|