| 編號 | 中文名稱 | 英文名稱 |
|---|
| IEC 60051-3 AMD 1-1994
| 直接作用模擬指示電測量儀表及其附件 第3部分:功率表和無功功率表的特殊要求 修改1
| Direct acting indicating analogue electrical-measuring instruments and their accessories - Part 3: Special requirements for wattmeters and varmeters; Amendment 1
|
| IEC 60051-3-1984
| 直接作用模擬指示電測量儀表及其附件 第3部分:功率表和無功功率表的特殊要求
| Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3 : Special requirements for wattmeters and varmeters
|
| IEC 60051-5-1985
| 直接作用模擬指示電測量儀表及其附件 第5部分:相位表、功率因數表和同步指示器的特殊要求
| Direct acting indicating analogue electrical measuring instruments and their accessories. Part 5: Special requirements for phase meters, power factor meters and synchroscopes.
|
| IEC 60072-1-1991
| 旋轉電機的尺寸及功率等級 第1部分:機座號:56～400、凸緣號:55～1080
| Dimensions and output series for rotating electrical machines; part 1: frame numbers 56 to 400 and flange numbers 55 to 1080
|
| IEC 60072-2-1990
| 旋轉電機的尺寸及功率等級 第2部分:機座號:355～1000、凸緣號:1180～2360
| Dimensions and output series for rotating electrical machines; part 2: frame numbers 355 to 1000 and flange numbers 1180 to 2360
|
| IEC 60072-3-1994
| 旋轉電機的尺寸及功率等級 第3部分:內裝式小功率電機、凸緣號:BF10～BF50
| Dimensions and output series for rotating electrical machines; part 3: small built-in motors; flange numbers BF10 to BF50
|
| IEC 60115-2-1-1982
| 電子設備用固定電阻器 第2-1部分:空白詳細規范:低功率非線繞固定電阻器 評定水平E
| Sectional specification : Fixed resistor networks in which not all resistors are individually measurable. Part 2 : Sectional specification: Fixed low-power non-wirewound resistors. Blank detail specification: Fixed low-power non-wirewound resistors. Assessment level E
|
| IEC 60115-2-1982
| 電子設備用固定電阻器 第2部分:分規范:低功率非線繞固定電阻器
| Sectional specification : Fixed resistor networks in which not all resistors are individually measurable. Part 2 : Sectional specification: Fixed low-power non-wirewound resistors
|
| IEC 60115-2-2-1992
| 電子設備用固定電阻器 第2-2部分:空白詳細規范:低功率非線繞固定電阻器 評定水平F
| Fixed resistors for use in electronic equipment; part 2: blank detail specification: fixed low-power non-wirewound resistors; assessment level F
|
| IEC 60115-4 AMD 1-1993
| 電子設備用固定電阻器 第4部分:分規范:功率型固定電阻器 評定水平E 修改1
| Fixed resistors for use in electronic equipment; part 4: sectional specification: fixed power resistors; amendment 1
|
| IEC 60115-4-1 AMD 1-1993
| 電子設備用固定電阻器 第4-1部分:詳細規范:功率型固定電阻器 評定水平E 修改1
| Fixed resistors for use in electronic equipment; part 4: blank detail specification: fixed power resistors; assessment level E; amendment 1
|
| IEC 60115-4-1-1983
| 電子設備用固定電阻器 第4-1部分:空白詳細規范:功率型固定電阻器 評定水平E
| Sectional specification : Fixed resistor networks in which not all resistors are individually measurable. Part 4 : Sectional specification: Fixed power resistors. Blank detail specification: Fixed power resistors. Assessment level E
|
| IEC 60115-4-101-1995
| 電子設備用固定電阻器 第4-101部分:詳細規范:軸向引線的線繞功率型固定電阻器 穩定度等級5% 評定水平E
| Fixed resistors for use in electronic equipment - Part 4: Detail specification: Fixed power wirewound resistors with solderable axial wire leads - Stability class 5% - Assessment level E
|
| IEC 60115-4-102-1995
| 電子設備用固定電阻器 第4-102部分:詳細規范:軸向引線的線繞功率型固定電阻器 穩定度等級1% 評定水平E
| Fixed resistors for use in electronic equipment - Part 4: Detail specification: Fixed power wirewound resistors with solderable axial wire leads - Stability class 1% - Assessment level E
|
| IEC 60115-4-1982
| 電子設備用固定電阻器 第4部分:分規范:功率型固定電阻器
| Sectional specification : Fixed resistor networks in which not all resistors are individually measurable. Part 4 : Sectional specification: Fixed power resistors
|
| IEC 60115-4-2-1992
| 電子設備用固定電阻器 第4-2部分:空白詳細規范:功率型固定電阻器 評定水平F
| Fixed resistors for use in electronic equipment; part 4: blank detail specification: fixed power resistors; assessment level F
|
| IEC 60115-4-3-1993
| 電子設備用固定電阻器 第4-3部分:空白詳細規范:帶散熱的功率型固定電阻器 評定水平H
| Fixed resistors for use in electronic equipment; part 4: blank detail specification: fixed power resistors, heat-sink types; assessment level H
|
| IEC 60151-10-1966
| 電子管電性能的測量 第10部分:音頻輸出功率和失真的測量方法
| Measurements of the electrical properties of electronic tubes. Part 10 : Methods of measurement of audio-frequency output power and distortion
|
| IEC 60151-11-1966
| 電子管電性能的測量 第11部分:射頻輸出功率的測量方法
| Measurements of the electrical properties of electronic tubes. Part 11 : Methods of measurement of radiofrequency output power
|
| IEC 60235-5-1972
| 微波管電性能的測量 第5部分:小功率振蕩速調管
| Measurement of the electrical properties of microwave tubes. Part 5 : Low-power oscillator klystrons
|
| IEC 60235-6-1972
| 微波管電性能的測量 第6部分:大功率速調管
| Measurement of the electrical properties of microwave tubes. Part 6 : High-power klystrons
|
| IEC 60244-2 AMD 1-1974
| 無線電發射機的測量方法 第2部分:帶寬、帶外功率和非本振功率 修改1
| Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations
|
| IEC 60244-2-1969
| 無線電發射機的測量方法 第2部分:帶寬、帶外功率和非本振功率
| Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations
|
| IEC 60244-2A AMD 1-1973
| 無線電發射機的測量方法 第2部分:帶寬、帶外功率和非本振功率 補充1:附錄 修改1
| Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations. First supplement: Appendices
|
| IEC 60244-2A-1969
| 無線電發射機的測量方法 第2部分:帶寬、帶外功率和非本振功率 補充1:附錄
| Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations. First supplement: Appendices
|
| IEC 60244-2B-1969
| 無線電發射機的測量方法 第2部分:帶寬、帶外功率和非主振功率 補充2:用于電話及聲音廣播發射機的帶寬及帶外
| Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations. Second supplement: Modulating signals for the measurement of bandwidth and out-of-band power of transmitters for telephony and sound broadcasting
|
| IEC 60255-12-1980
| 電氣繼電器 第12部分:兩個輸入激勵量的方向繼電器和功率繼電器
| Electrical relays. Part 12 : Directional relays and power relays with two input energizing quantities
|
| IEC 60268-16-2003
| 聲系統設備.第16部分:用語音傳輸系數測定語音清晰度的目標額定功率
| Sound system equipment - Part 16: Objective rating of speech intelligibility by speech transmission index
|
| IEC 60393-4-1-1992
| 電子設備用電位器 第4-1部分:空白詳細規范:單圈旋轉功率電位器 評定水平E
| Potentiometers for use in electronic equipment; part 4: blank detail specification: singel-turn rotary power potentiometers; assessment level E
|
| IEC 60393-4-1992
| 電子設備用電位器 第4部分:分規范:單圈旋轉功率電位器
| Potentiometers for use in electronic equipment; part 4: sectional specification: single-turn rotary power potentiometers
|
| IEC 60393-4-2-1992
| 電子設備用電位器 第4-2部分:空白詳細規范:單圈旋轉功率電位器 評定水平F
| Potentiometers for use in electronic equipment; part 4: blank detail specification: singel-turn rotary power potentiometers; assessment level F
|
| IEC 60393-5-1-1992
| 電子設備用電位器 第5-1部分:空白詳細規范:單圈旋轉低功率電位器 評定水平E
| Potentiometers for use in electronic equipment; part 5: blank detail specification: singel-turn rotary low-power potentiometers; assessment level E
|
| IEC 60393-5-1992
| 電子設備用電位器 第5部分:分規范:單圈旋轉線繞和非線繞低功率電位器
| Potentiometers for use in electronic equipment; part 5: sectional specification: single-turn rotary low-power wirewound and non-wirewound potentiometers
|
| IEC 60393-5-2-1992
| 電子設備用電位器 第5-2部分:空白詳細規范:單圈旋轉低功率電位器 評定水平F
| Potentiometers for use in electronic equipment; part 5: blank detail specification: singel-turn rotary low-power potentiometers; assessment level F
|
| IEC 60510-2-7-1989
| 衛星地面站用無線電設備的測量方法 第2部分:分系統測量 第7節:大功率放大器
| Methods of measurement for radio equipment used in satellite earth stations; part 2: measurements for sub-systems; section seven, high-power amplifier
|
| IEC 60681-1-1980
| 專用小功率電動機的尺寸 第1部分:燃油器電動機
| Dimensions of small power motors for definite purpose application. Part 1 : Oil burner motors
|
| IEC 60747-8-2-1993
| 半導體器件 分立器件 第8部分:場效應晶體管 第2節:外殼額定功率放大場效應晶體管空白詳細規范
| Semicoductor devices; discrete devices; part 8: field-effect transistors; section 2: blank detail specification for field-effect transistors for case-rated power amplifier applications
|
| IEC 60835-3-6-1996
| 數字微波無線電傳輸系統使用設備的測量方法 第3部分:衛星地面站的測量 第6節:大功率放大器
| Methods of measurement for equipment used in digital microwave transmission systems - Part 3: Measurements on satellite earth stations - Section 6: High-power amplifiers
|
| IEC 61000-2-13-2005
| 電磁兼容性(EMC) 第2-13部分:環境.輻射和傳導的大功率電磁(HEMP)環境
| Electromagnetic compatibility (EMC) - Part 2-13: Environment - High-power electromagnetic (HPEM) environments, radiated and conducted
|
| IEC 61000-4-13-2002
| 電磁兼容性.第4-13部分:試驗和測量技術.包括交流電功率點主要信號的低頻抗擾試驗諧波和中間諧波
| Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques; Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
|
| IEC 61000-4-17 Edition 1.1-2002
| 電磁兼容性(EMC).第4-17部分:試驗和測量技術.直流電流輸入功率點通道.干擾試驗
| Electromagnetic compatibility (EMC) - Part 4-17: Testing and measuring techniques; Ripple on d.c. input power port immunity test
|
| IEC 61000-4-30-2003
| 電磁兼容性(EMC).第4-32部分:試驗和測量技術.功率質量測量方法
| Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques; Power quality measurement methods
|
| IEC 61040-1990
| 激光輻射用功率和能量測量探測器、儀器和設備
| Power and energy measuring detectors, instruments and equipment for laser radiation
|
| IEC 61123-1991
| 可靠性試驗 成功率驗證試驗方案
| Reliability testing; compliance test plans for success ratio
|
| IEC 61161-1998
| 0.5MHz～25MHz頻率范圍內液體中超聲波功率測量
| Ultrasonic power measurement in liquids in the frequency range 0,5 MHz to 25 MHz
|
| IEC 61280-1-1-1998
| 纖維光學通信子系統基本試驗程序 第1-1部分:一般通信子系統試驗程序 單模光纜發射器光輸出功率測量
| Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable
|
| IEC 61290-1-2-2005
| 光學放大器.試驗方法.第1-2部分:光功率參數和增益參數.電頻譜分析儀法
| Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method
|
| IEC 61290-1-3-2005
| 光學放大器.試驗方法.第1-3部分:光功率參數和增益參數.光功率計法
| Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
|
| IEC 61290-7-1-1998
| 光學纖維放大器 基礎規范 第7-1部分:頻帶外插入損耗的測量方法 濾波光功率計
| Optical fibre amplifiers - Basic specification - Part 7-1: Test methods for out-of-band insertion losses - Filtered optical power meter
|
| IEC 61300-2-14-2005
| 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-14部分:試驗.光學功率控制和損壞閾特性
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - Optical power handling and damage threshold characterization
|
| IEC 61300-3-31-2003
| 光纖互連裝置和無源部件.基本試驗和測量程序.第3-34部分:檢驗和測量.纖維光學源的耦合功率比測量
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31: Examinations and measurements; Coupled power ratio measurement for fibre optic sources
|
| IEC 61307-2006
| 工業微波加熱設備 測定輸出功率的試驗方法
| Industrial microwave heating installations - Test methods for the determination of power output
|
| IEC 61308-2005
| 高頻電介質加熱設備.測定輸出功率的試驗方法
| High-frequency dielectric heating installations - Test methods for the determination of power output
|
| IEC 61315-2005
| 纖維光學功率計校準
| Calibration of fibre optic power meters
|
| IEC 61400-21-2001
| 風輪發電機系統 第21部分：管道連接風輪機功率質量特性的測量和評定
| Wind turbine generator systems - Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines
|
| IEC 61523-2-2002
| 延遲計算和功率計算標準.第2部分:互補金屬氧化物半導體(CMOS)專用集成電路(ASIC)程序庫用配套延遲計算規范
| Delay and power calculation standards - Part 2: Pre-layout delay calculation specification for CMOS ASIC libraries
|
| IEC 61580-8-1996
| 波導測量方法 第8部分:波導功率容量
| Methods of measurement for waveguides - Part 8: Waveguide power holding capability
|
| IEC 61683-1999
| 光伏系統 功率調節器 效率測量程序
| Photovoltaic systems - Power conditioners - Procedure for measuring efficiency
|
| IEC 61803 Corrigendum 1-1999
| 高壓直流(HVDC)變流站功率損失的測定
| Determination of power losses in high-voltage direct current (HVDC) converter stations
|
| IEC 61803-1999
| 高壓直流(HVDC)變流站功率損失的測定
| Determination of power losses in high-voltage direct current (HVDC) converter stations
|
| IEC 61922-2002
| 高頻感應加熱裝置.測定發生器功率輸出的試驗方法
| High-frequency induction heating installations - Test methods for the determination of power output of the generator
|
| IEC 61954 Corrigendum 1-1999
| 輸電和配電系統用電力電子設備.靜態無功功率補償器用晶閘管閥的試驗
| Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators
|
| IEC 61954-1999
| 輸電和配電系統用電力電子設備 靜態無功功率補償器用晶閘管閥的試驗
| Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators
|
| IEC 62018-2003
| 信息技術設備的功率消耗.測量方法
| Power consumption of information technology equipment - Measurement methods
|
| IEC 62087-2002
| 聲頻、視頻和相關設備功率消耗量的測量方法
| Methods of measurement for the power consumption of audio, video and related equipment
|
| IEC 62132-4-2006
| 集成電路.150kHz-1GHz電磁抗擾度的測量.第4部分:直接射頻功率注入法
| Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz - Part 4: Direct RF power injection method
|
| IEC/TR 62271-308-2002
| 高壓開關設備和控制設備.第308部分:不對稱短路試驗功率T100a指南
| High-voltage switchgear and controlgear - Part 308: Guide for asymmetrical short-circuit breaking test duty T100a
|
| IEC/TS 61400-14-2005
| 風輪機.第14部分:表面聲功率級和音調值聲明
| Wind turbines - Part 14: Declaration of apparent sound power level and tonality values
|
| 編號 | 中文名稱 | 英文名稱 |
|---|