| 編號 | 中文名稱 | 英文名稱 |
|---|
| NF A32-060-2001
| 鑄造產品.泵、閥門和配件用鑄鋼件和鎳合金鑄件(內部部件和防護殼體)
| (Foundry products - Cast steel and nickel alloy castings for pumps, valves and fittings (enclosures and internal components).)
|
| NF C52-121-1968
| 變壓器.變壓器油用電泵組
| (TRANSFORMERS. ELECTRIC POMPS FOR TRANSFORMER OIL.)
|
| NF C52-121M1-1974
| 變壓器.變壓器油用電泵組
| (TRANSFORMERS. ELECTRIC POMPS FOR TRANSFORMER OIL.)
|
| NF C52-121M2-1977
| 變壓器.變壓器油用電泵組
| (TRANSFORMERS.ELECTRIC POMPS FOR TRANSFORMER OIL.)
|
| NF C52-216-7-2002
| 電力變壓器和反應堆配件.第7部分: 變壓器油用電子泵
| (Power transformer and reactor fittings - Part 7 : electric pumps for transformer oil.)
|
| NF C55-409-2-2000
| 水輪機、蓄能泵和水泵水輪機氣蝕損壞的評定.第2部分:水斗式水輪機的評定
| (Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines - Part 2 : evaluation in Pelton turbines.)
|
| NF C55-420-1993
| 液壓機(渦輪、存儲泵和水泵-水輪機)的振動和脈動的現場測量指南
| (Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storga pumps and pump-turbines).)
|
| NF C55-493-2000
| 液壓渦輪機,儲存泵和泵渦輪.模型驗收試驗
| (Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests.)
|
| NF C57-310-1988
| 太陽能電能直接轉換.光伏特泵裝置.預見特性
| (DIRECT TRANSFORMATION OF SOLAR ENERGY INTO ELECTRICAL ENERGY. PHOTOVOLTAIC PUMPING SYSTEM. PREDICTED CHARACTERISTICS.)
|
| NF C57-335-2000
| 直接連接的光電(PV)泵裝置的額定值
| (Rating of direct coupled photovoltaic (PV) pumping systems.)
|
| NF C73-840-2001
| 家用及類似用途電器的安全.第2-40部分: 電動熱泵、空調器和去濕機的特殊要求
| (Safety household and similar electrical appliances - Part 2-40 : particular requirements for electrical heat pumps, air conditioners and deshumidifiers.)
|
| NF C73-841-1996
| 家用和類似用途電器的安全.第2部分:溫度不超過35℃的液體用電泵 的特殊要求
| (Safety of household and similar electrical appliances. Part 2 :particular requirements for pumps for liquids having a temperature not exceeding 35 degrees celsius.)
|
| NF C73-851-2000
| 家用和類似用途電器的安全.第2-51部分:加熱設備和配水設備的固定循環泵的特殊要求
| (Safety of household and similar electrical appliances - Part 2-51 : particular requirements for stationary circulation pumps for heating and service water installations.)
|
| NF C74-304-2003
| 醫用電氣設備.第2-24部分:輸液泵及其控制器的安全特殊要求
| (Medical electrical equipment Part 2-24 : particular requirements for the safety of infusion pumps and controllers.)
|
| NF C93-805-6-1-1998
| 光纖放大器. 基本規范.第6-1部分:泵漏參數的試驗方法.光信號分離器
| (Optical fibre amplifiers. Basic specification. Part 6-1 : test methods for pump leakage parameters. Optical demultiplexer.)
|
| NF E31-312-1988
| 油霧化燃燒器.帶旋轉軸和外部傳動泵.尺寸
| (ATOMIZING OIL BURNERS. PUMPS WITH ROTATING SHAFT AND EXTERNAL DRIVE. DIMENSIONS. (EUROPEAN STANDARD EN 225).)
|
| NF E35-404-1-2000
| 制冷系統和熱泵.安全和環境要求.第1部分:基本要求、定義、分類和選擇標準
| (Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1 : basic requirements, definitions, classification and selection criteria.)
|
| NF E35-404-2-2000
| 制冷系統和熱泵.安全和環境要求.第2部分:設計,結構,試驗,標記和存檔
| (Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2 : design, construction, testing, marking and documentation.)
|
| NF E35-404-3-2000
| 制冷系統和熱泵.安全和環境要求.第3部分:安裝地點和個人保護
| (Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3 : installation site and personal protection.)
|
| NF E35-404-4-2000
| 制冷系統和熱泵.安全和環境要求.第4部分:操作,維護,修理和恢復
| (Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4 : operation, maintenance, repair and recovery.)
|
| NF E35-407-2002
| 制冷系統和熱泵.限制壓力的安全開關裝置.要求和試驗
| (Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests.)
|
| NF E35-413-2001
| 冷卻系統和熱泵.減壓裝置及其相應管道.計算方法
| (Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation.)
|
| NF E35-415-1998
| 冷凍系統和熱泵.系統流程圖和管道及結構圖.流程圖和符號
| (REFRIGERATING SYSTEMS AND HEAT PUMPS. SYSTEM FLOW DIAGRAMS AND PIPING AND INSTRUMENT DIAGRAMS. LAYOUT AND SYMBOLS. (EUROPEAN STANDARD EN 1861).)
|
| NF E35-420-2002
| 制冷系統和熱泵.人員能力.
| (Refrigerating systems and heat pumps - Competence of personnel.)
|
| NF E35-451-1998
| 帶有電動壓縮機的熱泵和液體制冷包裝.制冷模式.定義,試驗和要求
| (Liquid chilling packages and heat pumps with electrically driven compressors. Cooling mode. Definitions, testing and requirements.)
|
| NF E35-600-2-2000
| 燃氣吸收和吸收式空調和/或凈輸入熱量不超過70KW的熱泵用具.第2部分:合理的能量使用
| (Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Part 2 : rational use of energy.)
|
| NF E36-104-1-1997
| 帶電驅動壓縮機的空調器和熱力泵.制冷.第1部分:術語、定義、名稱和牌號
| (Air conditioners and heat pumps with electrically driven compressors. Cooling mode. Part 1 : terms, definitions and designations.)
|
| NF E36-104-2-1997
| 帶電驅動壓縮機的空調器和熱力泵.制冷.第2部分:試驗和標記要求
| (Air conditioners and heat pumps with electrically driven compressors. Cooling mode. Part 2 : testing and requirements for marking.)
|
| NF E36-104-3-1997
| 帶電驅動壓縮機的空調器和熱力泵.制冷.第3部分:要求
| (Air conditioners and heat pumps with electrically driven compressors. Cooling mode. Part 3 : requirements.)
|
| NF E38-115-1-1997
| 帶電驅動壓縮機的空調器,液體冷卻設備和熱力泵.暖氣.第1部分:術語,定義和名稱,牌號
| (Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors. Heating mode. Part 1 : terms, definitions and designations.)
|
| NF E38-115-2-1997
| 帶電驅動壓縮機的空調器,液體冷卻設備和熱力泵.暖氣.第2部分:室內暖氣用設備標志的檢驗和要求
| (Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors. Heating mode. Part 2 : testing and requirements for marking for space heating units.)
|
| NF E38-115-3-1997
| 帶電驅動壓縮機的空調器,液體冷卻設備和熱力泵.暖氣.第3部分:工業用水加熱用設備標志的檢驗和要求
| (Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors. Heating mode. Part 3 : testing and requirements for marking for sanitary hot water units.)
|
| NF E38-115-4-1997
| 帶電驅動壓縮機的空調器,液體冷卻設備和熱力泵.暖氣.第4部分:工業用水加熱及室內暖氣用設備的要求
| (Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors. Heating mode. Part 4 : requirements for space heating and sanitary hot water units.)
|
| NF E44-003-2000
| 液體泵.泵和設施的一般術語.定義,數量,字母符號和元件
| (Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units.)
|
| NF E44-051-2001
| 液體泵.安全要求.靜液壓試驗過程
| (Liquid pumps - Safety requirements - Procedure for hydrostatic testing.)
|
| NF E44-052-1986
| 泵.標記
| (PUMPS. MARKING.)
|
| NF E44-090-1998
| 液壓泵和液壓泵組件.一般安全要求
| (Pumps and pump units for liquids. Common safety requirements.)
|
| NF E44-125-1995
| 側槽泵.PN40.公稱負荷值.主要尺寸.命名系統
| (SIDE CHANEL PUMPS PN 40. NOMINAL DUTY POINT, MAIN DIMENSIONS, DESIGNATION SYSTEM. (EUROPEAN STANDARD EN 734).)
|
| NF E44-145-1988
| 轉子動力泵.法蘭盤受力和力矩.臥軸離心泵和混流量
| (ROTODYNAMIC PUMPS. FORCES AND MOMENTS ON FLANGES. HORIZONTAL SHAFT CENTRIFUGAL AND MIXED FLOW PUMPS.)
|
| NF E44-146-1988
| 旋轉泵.法蘭力和力矩.垂直軸離心泵.混流泵和軸流泵
| (ROTODYNAMIC PUMPS. FORCES AND MOMENTS ON FLANGES. VERTICAL SHAFT CENTRIFUGAL,MIXED FLOW AND AXIAL PUMPS.)
|
| NF E44-151-2002
| 離心泵的技術規范.2類
| (Technical specifications for centrifugal pumps - Class II.)
|
| NF E44-152-1998
| 離心泵的技術規范.1類
| (TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS. CLASS 1. (EUROPEAN STANDARD EN ISO 9905).)
|
| NF E44-154-1998
| 離心泵機械規范.三級
| (TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS. CLASS III. (EUROPEAN STANDARD EN ISO 9908).)
|
| NF E44-160-2003
| 無密封旋轉動力泵.II級.規范
| (Seal-less rotodynamic pumps - Class II - Specification.)
|
| NF E44-165-1990
| 工業泵.離心泵、混流泵和軸流泵.允許的機械振動級
| (Industrial pumps. Centrifugal, mixed flow and axial pumps. Allowable level for mechanical vibrations.)
|
| NF E44-190-1975
| 泵.裝配和安裝規范
| (PUMPS-INSTRUCTIONS FOR MOUNTING AND INSTALLATION.)
|
| NF E44-201-1984
| 泵.收斂和輻射連接規則
| (PUMPS. RECOMMENDATIONS FOR CONNECTING BY CONVERGENT AND DIVERGENT SECTIONS.)
|
| NF E44-221-1976
| 泵.連接器安裝時軸端的距離
| (PUMPS. SHAFT END SPACING FOR COUPLING MOUNTING.)
|
| NF E44-290-1975
| 泵.帶或不帶插件的連接器.用途和安裝
| (PUMPS-COUPLINGS WITH OR WITHOUT SPACING PART-PURPOSE AND MOUNTING.)
|
| NF E44-301-1984
| 泵.切削液.規范
| (PUMPS FOR CUTTING OILS. SPECIFICATIONS.)
|
| NF E44-351-1987
| 流量測定泵.潔凈水補充處理電能計量泵.試驗方法
| (DISPLACEMENT PUMPS. ELECTRICALLY DRIVEN PROPORTIONING PUMPS FOR WASTE WATER TREATMENT. TESTS.)
|
| NF E44-361-1999
| 旋轉變?nèi)荼?技術要求
| (ROTARY POSITIVE DISPLACEMENT PUMPS. TECHNICAL REQUIREMENTS. (EUROPEAN STANDARD EN ISO 14847).)
|
| NF E44-362-2003
| 往復式容積泵和泵裝置.技術要求
| (Reciprocating positive displacement pumps and pumps units - Technical requirements.)
|
| NF E44-401-2000
| 旋轉動力泵.液壓性能驗收試驗.等級1和2
| (Rotodynamic pumps - Hydraulic perforamnce acceptance tests - Grades and 2.)
|
| NF E44-420-2000
| 液體泵和泵部件.噪音試驗規程.2級或3級精度
| (Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy.)
|
| NF E48-101-1984
| 液壓傳動.泵，發動機和變速器.量值的定義和用作符號的字母
| (Hydraulic fluid power. Pumps, motors and integral transmissions. Parameter definitions and letter symbols.)
|
| NF E48-353-2002
| 液力傳動.活塞泵和電動機的安裝法蘭盤和軸端用尺寸及識別碼.第2部分:米制系列
| (Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2 : metric series.)
|
| NF E48-354-1989
| 液壓傳動.容積泵和容積汽缸功率的測定
| (HYDRAULIC FLUID POWER. POSITIVE DISPLACEMENT PUMPS AND MOTORS.)
|
| NF E48-384-1992
| 液壓動力.固定式活塞泵.由于AC級細粒粉塵污染引起的流動降緩.試驗方法
| (HYDRAULIC FLUID POWER. FIXED DISPLACEMENT PUMPS. FLOW DEGRADATION DUE TO CLASSIFIED AC FINE TEST DUST CONTAMINANT. TEST METHOD.)
|
| NF E48-386-1992
| 氣壓液力傳動.氣載噪聲級測定試驗規程.第1部分:泵
| (HYDRAULIC FLUID POWER. TEST CODE FOR DETERMINATION OF AIRBONE NOISE LEVELS. PART 1 : PUMPS.)
|
| NF E48-388-1992
| 氣壓液力傳動.氣載噪聲級測定試驗規程.第3部分:泵.平行六面?zhèn)髀暺麝嚵蟹椒? | (HYDRAULIC FLUID POWER. TEST CODE FOR DETERMINATION OF AIRBONE NOISE LEVELS. PART 3 : PUMPS. METHOD USING A PARALLELEPIPED MICROPHONE ARRAY.)
|
| NF E48-390-1997
| 液壓傳動.在系統和元件中對產生壓力波動等級的測定.第1部分:泵精確度法
| (HYDRAULIC FLUID POWER. DETERMINATION OF PRESSURE RIPPLE LEVELS GENERATED IN SYSTEMS AND COMPONENTS. PART 1 : PRECISION METHOD FOR PUMP.)
|
| NF E48-391-2000
| 液壓動力.系統和元件內產生的壓力波動水平的測定.泵用簡化方法
| (Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Simplified method for pumps.)
|
| NF E51-290-1996
| 壓縮機和真空泵.安全要求.第1部分:壓縮機
| (Compressors and vacuum pumps. Safety requirements. Part 1 : compressors.)
|
| NF E51-291-1996
| 壓縮機和真空泵.安全要求.第2部分:真空泵
| (Compressors and vacuum pumps. Safety requirements. Part 2 : vacuum pumps.)
|
| NF E86-514-2000
| 冷凍車輛.冷凍服務用泵
| (Cryogenic vessels - Pumps for cryogenic service.)
|
| NF J95-024-1993
| 游艇.電動艙底泵
| (Small craft. Electrically operated bilge-pumps.)
|
| NF J95-024/A1-2001
| 小艇.電氣操作底艙泵
| (Small craft - Electrically operated bilge-pumps.)
|
| NF J95-062-2003
| 小艇.艙底泵吸系統
| (Small craft - Bilge-pumping systems.)
|
| NF L45-101-1987
| 航空和航天.液力、壓力補償或變量輸送泵.一般要求
| (Aerospace. Hydraulic, pressure compensated, variable delivery pumps. General requirements.)
|
| NF L48-130-1948
| 飛機的流體裝置.使用的互換性.燃料計量器、燃料泵等的接管座
| (AIRCRAFT FLUID INSTALLATIONS. IN-SERVICE INTERCHANGEABILITY. FLANGES FOR LEVEL INDICATORS,FUEL PUMPS,ETC... (RECH.).)
|
| NF L48-135-1972
| 燃料計量器、燃料泵等接頭的使用互換性（ISO 螺紋剖面和公差）
| (IN-SERVICE INTERCHANGEABILITY. FLANGES FOR LEVEL INDICATORS,FUEL PUMPS,ETC... (ISO THREAD PROFILE AND TOLERANCES).)
|
| NF L86-110-1958
| 供油泵.固定和驅動
| (FEED PUMPS. MOUNTING AND DRIVE.)
|
| NF M87-237-1-2002
| 石油和天然氣工業用下降孔設備.人造升降機用行進腔體泵系統.第1部分:泵
| (Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1 : pumps.)
|
| NF P16-150-6-1998
| 建筑物外部排水和污水系統.第6部分:泵設備
| (Drain and sewer systems outside buildings. Part 6 : pumping installations.)
|
| NF P52-101-2000
| 泵.旋轉動力泵.加熱裝置和家用熱水裝置用電效應不足200W的循環泵.要求、試驗和標記
| (Pumps - Rotodynamic pumps - Circulation pumps having an electrical effect not exceeding 200 W for heating installations and domestic hot water installations - Requirements, testing, marking.)
|
| NF P94-130-1992
| 土壤.調查與試驗.泵送試驗
| (SOILS : INVESTIGATION AND TESTING. PUMPING TEST.)
|
| NF P98-723-1-1994
| 道路施工和維護設備.瀝青粘合劑泵.第1部分:試驗臺和方法
| (ROAD CONSTRUCTION AND MAINTENANCE EQUIPMENT. BITUMINOUS BINDER PUMPES. PART 1 : TEST BENCH AND METHOD.)
|
| NF R13-404-1990
| 道路車輛.燃油泵的電連接件
| (Road vehicles. Fuel pump electric connections.)
|
| NF R16-306-1953
| 噴射泵連接管
| (COUPLINGS FOR INJECTION PUMPS.)
|
| NF R16-315-1982
| 道路車輛.柴油泵試驗.第1部分：動力條件
| (Fuel injection pump testing. Part 1 : dynamic conditions.)
|
| NF R16-317-1987
| 道路車輛.燃油噴射泵.試驗用高壓管
| (Road vehicles. Fuel injection pumps. High-pressure pipes for testing.)
|
| NF R16-321-1985
| 道路車輛.平面底座直線固定噴油泵
| (ROAD VEHICLES. BASE MOUNTED IN-LINE FUEL INJECTION PUMPS.)
|
| NF R16-322-1985
| 道路車輛.噴油泵試驗.靜態條件
| (ROAD VEHICLES. FUEL INJECTION PUMP TESTING. STATIC CONDITIONS.)
|
| NF R16-327-1986
| 道路車輛.噴油泵用安裝法蘭.尺寸
| (ROAD VEHICLES. END-MOUNTING FLANGES FOR FUEL INJECTION PUMPS. DIMENSIONS.)
|
| NF R16-328-1994
| 柴油發動機.燃油注入泵.軸端和襯套楔梢
| (Diesel engines. Fuel injection pumps. Tapers for shaft ends and hubs.)
|
| NF R16-329-2000
| 噴油裝置.詞匯.第1部分:噴油泵
| (Fuel injection equipment - Vocabulary - Part 1 : fuel injection pumps.)
|
| NF R16-329/A1-2001
| 燃料注入設備.詞匯.第1部分:燃料注入泵
| (Fuel injection equipment - Vocabulary - Part 1 : fuel injection pump.)
|
| NF R16-330-2003
| 道路車輛.弧形底安裝直列式噴油泵.安裝尺寸
| (Diesel engines - Cradle-mounted in-line fuel injection pumps - Mounting dimensions.)
|
| NF R16-333-1989
| 道路車輛.燃油噴射泵試驗.第3部分:產品應用和試驗
| (ROAD VEHICLES. FUEL INJECTION PUMP TESTING. PART 3 : APPLICATION AND TEST PROCEDURES.)
|
| NF S61-116-2003
| 消防水龍帶.泵和水車用半硬度輸水軟管和軟管組合件
| (Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles.)
|
| NF S63-125-1-2002
| 消防泵.帶起動注油器的消防離心泵.第1部分:分類.總則和安全要求
| (Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1 : classification - General and safety requirements.)
|
| NF S63-125-2-2002
| 消防泵.帶起動注油器的消防離心泵.第2部分:總則和安全要求的檢定
| (Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2 : verification of general and safety requirements.)
|
| NF S93-001-2-1997
| 一次性使用無菌皮下注射器.第1部分:帶動力注射泵的注射器
| (STERILE HYPODERMIC SYRINGES FOR SINGLE USE. PART 2 : SYRINGES FOR USE WITH POWER-DRIVEN SYRINGE PUMPS. (EUROPEAN STANDARD EN ISO 7886-2).)
|
| NF T71-200-1999
| 用碳氫化合物防止水污染的設備.泵系統.數據頁.標準布局.
| (EQUIPMENT FOR PROTECTION AGAINST WATER POLLUTION BY HYDROCARBONS. PUMPING SYSTEMS. DATA SHEET. STANDARD LAY-OUT.)
|
| NF T81-010-1976
| 液態化學產品的運輸和裝卸.內河航行罐船.產品的液壓泵輸送.安全裝置
| (TRANSPORT AND HANDLING OF LIQUID CHEMICAL PRODUCTS. TANKERS FOR INLAND NAVIGATION. PUMP TRANSFER OF PRODUCTS. SAFETY DEVICE.)
|
| NF U61-060-2003
| 液泵.安全要求.農業食品生產設備.保證使用衛生的設計原則
| (Liquid pumps - Safety requirements - Agrifoodstuffs equipment - Design rules to ensure hygiene in use.)
|
| NF X10-501-1976
| 真空技術.詞匯.真空泵
| (Vacuum technology. Vocabulary. Vacuum pumps.)
|
| NF X10-507-1975
| 真空技術.噴霧離子泵.功能特性的測定
| (VACUUM TECHNOLOGY - SPUTTER-ION PUMPS - MEASUREMENT OF PERFORMANCE CHARACTERISTICS)
|
| NF X10-511-1971
| 真空技術.真空體積初壓泵.體積流量的測定
| (Vacuum technology-positive-displacement vacuum pumps-measurement ofthe volume rate of flow (pumping speed).)
|
| NF X10-519-1975
| 真空技術.渦輪分子泵.功能特性的測定
| (VACUUM TECHNOLOGY - METHODS OF MEASUREMENT OF THE PERFORMANCE CHARACTERISTICS OF TURBO-MOLECULAR PUMPS)
|
| NF X20-204-1974
| 氣體分析.用配量活塞泵對氣體混合物的動力制備進行校準的方法
| (GAS ANALYSIS. METHOD FOR THE DYNAMIC PREPARATION OF GAS MIXTURES FOR CALIBRATION BY PROPORTIONING PISTON PUMPS.)
|
| NF X42-130-1998
| 生物工程.泵的性能規范(歐洲標準EN 12462)
| (Biotechnology. Performance criteria for pumps.) |
| NF X43-245-1999
| 工作場所空氣.體積流速大于51/min的化學試劑取樣用泵.要求和試驗方法
| (Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 5 l/min - Requirements and test methods.)
|
| NF X43-282-1997
| 工作場所空氣.化學試劑專用抽樣泵.要求和試驗方法(歐洲標準EN 1232)
| (WORKPLACE ATMOSPHERES. PUMPS FOR PERSONAL SAMPLING OF CHEMICAL AGENTS. REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 1232).)
|
| NF X50-001-5-4-1998
| 動力站設備的征購指南.第5-4部分:渦輪機.液壓渦輪機.儲存泵和泵渦輪機
| (Guide for procurement of power station equipment. Part 5-4 : turbines. Hydraulic turbines, storage pumps and pump-turbines.)
|
| NF X50-001-6-4-2000
| 動力站設備的征購指南.第6部分:渦輪附件.第4節:泵
| (Guide for the procurement of power station equipement - Part 6 : turbine auxiliaries - Section 4 : pumps.)
|
| 編號 | 中文名稱 | 英文名稱 |
|---|