| 編號 | 中文名稱 | 英文名稱 |
|---|
| DIN 12330-1981
| 熔融石英和熔融氧化硅材料制實驗室器具.熔融石英玻璃燒杯
| Laboratory ware made from fused quartz and fused silica; beakers made from fused quartz
|
| DIN 12353-1981
| 熔融石英和熔融硅石制實驗室儀器.熔融石英燒瓶、圓底燒瓶、平底燒瓶和錐形燒瓶
| Laboratory ware made from fused quartz and fused silica; boiling flasks made from fused quartz; round bottom flasks, flat bottom flasks and conical flasks
|
| DIN 12542-1979
| 熔融石英和硅石制的實驗室儀器.熔融石英制成的直孔旋塞.
| Laboratory ware made from fused quartz and fused silica; straight bore stopcocks made from fused quartz
|
| DIN 12543-1979
| 熔融石英和硅石制實驗儀器.熔融石英制三通旋塞.
| Laboratory ware made from fused quartz and fused silica; T-bore stopcocks made from fused quartz
|
| DIN 52342-1-1980
| 玻璃生產用原料的檢驗.二氧化硅最低含量為 98% 的石英砂的化學分析.第1部分:一般報告和指南
| Testing of raw materials for the production of glass; chemical analysis of arenaceous quartz with at least 98 % silica, general statements and guidelines
|
| DIN 52342-2-1980
| 玻璃生產用原料的檢驗.二氧化硅最低含量為 98% 的石英砂的化學分析.第2部分:測定 Al<下標2>O<下標3>、 Fe<
| Testing of raw materials for the production of glass; chemical analysis of arenaceous quartz with at least 98 % silica, fusion process for the determination of Al<(Index)2>O<(Index)3>, Fe<(Index)2>O<(Index)3> and TiO<(Index)2> as we-ll as CaO, MgO, Na<(Index)2>O and K<(Index)2>O
|
| DIN 52342-3-1988
| 玻璃生產原料的檢驗.二氧化硅含量最低為 98% 石英砂的化學分析.第3部分:Al<下標2>O<下標3> 測定
| Testing of raw materials for the production of glass; chemical analysis of arenaceous quartz with at least 98 % silica; determination of Al<(Index)2>O<(Index)3>
|
| DIN 52342-4-1980
| 玻璃生產用原料的檢驗.二氧化硅最低含量為 98% 的石英砂的化學分析.第4部分:以氧化鐵(III) Fe<下標2>O<下標
| Testing of raw materials for the production of glass; chemical analysis of arenaceous quartz with at least 98 % silica, determination of the total content calculated as iron(III)-oxide Fe<(Index)2>O<(Index)3>
|
| DIN 52342-5-1980
| 玻璃生產用原料的檢驗.二氧化硅最低含量為 98% 的石英砂的化學分析.第5部分:氧化鈦(IV) TiO<下標2> 的測定
| Testing of raw materials for the production of glass; chemical analysis of arenaceous quartz with at least 98 % silica, determination of titanium(IV)-oxide TiO<(Index)2>
|
| DIN 52342-6-1980
| 玻璃生產用原料的檢驗.第6部分:二氧化硅最低含量為98%的石英砂的化學分析、測定 CaO 和 MgO
| Testing of raw materials for the production of glass; chemical analysis of arenaceous quartz with at least 98 % silica, determination of CaO and MgO
|
| DIN 52342-7-1980
| 玻璃生產用原料的檢驗.二氧化硅最低含量為 98% 的石英砂的化學分析.第7部分: NA<下標2>O and K<下標2>O 的
| Testing of raw materials for the production of glass; chemical analysis of arenaceous quartz with at least 98 % silica, determination of NA<(Index)2>O and K<(Index)2>O
|
| DIN 55626-19-2007
| 紙和紙板用填充劑和顏料.規范和試驗方法.第19部分:沉淀二氧化硅(石英)
| Extenders and pigments for paper and board - Specifications and methods of test - Part 19: Precipitated silica
|
| DIN 55626-20-2007
| 紙和紙板用填充劑和顏料.規范和試驗方法.第20部分:氣相二氧化硅(石英)
| Extenders and pigments for paper and board - Specifications and methods of test - Part 20: Fumed silica
|
| DIN 8325-1-1987
| 大型石英鐘.要求、檢驗、標志
| Quartz-clocks; requirements, testing, marking
|
| DIN 8325-2-1989
| 石英鐘.鬧鐘.要求、檢驗
| Quartz clocks; alarm clocks; requirements, testing
|
| DIN 8326-1-1988
| 石英手表.第1部分:要求、檢驗、標記
| Quartz wrist watches; requirements, testing, marking
|
| DIN EN 12904-2005
| 人類生活用水處理用制品.石英砂和石英礫石
| Products used for treatment of water intended for human consumption - Silica sand and silica gravel; German version EN 12904:2005
|
| DIN EN 168100-1993
| 分規范:石英晶體裝置(性能批準)
| Sectional specification: quartz crystal units (capability approval) (includes amendments A1 and A2:1993); German version EN 168100:1993
|
| DIN EN 168101-1992
| 空白詳細規范.石英振蕩器(性能批準)
| Blank detail specification; quartz crystal units (capability approval); german version EN 168101:1992
|
| DIN EN 168200-1993
| 分規范.石英晶體裝置(合格認定)
| Sectional specification; quartz crystal units (qualification approval); German version EN 168200:1993
|
| DIN EN 168201-1992
| 空白詳細規范.石英振蕩器(合格批準)
| Blank detail specification; quartz crystal units (qualification approval); german version EN 168201:1992
|
| DIN EN 169200-1996
| 分規范:石英受控振蕩器(合格鑒定)
| Sectional specification: Quartz crystal controlled oscillators (Qualification approval); German version EN 169200:1995
|
| DIN EN 169201-1996
| 空白詳細規范:石英受控振蕩器(合格鑒定)
| Blank detail specification: Quartz crystal controlled oscillators (Qualification approval); German version EN 169201:1995
|
| DIN EN 60122-1-2003
| 經質量評定的石英晶體元件.第1部分:總規范
| Quartz crystal units of assessed quality - Part 1: Generic specification (IEC 60122-1:2002); German version EN 60122-1:2002
|
| DIN EN 60122-3-2002
| 經質量評估的石英晶體元件.第3部分:標準外形和引線連結件 (IEC 60122-3:2001); 德文版本 EN 60122-3:2001
| Quartz crystal units of assessed quality - Part 3: Standard outlines and lead connections (IEC 60122-3:2001); German version EN 60122-3:2001
|
| DIN EN 60444-1-2000
| 用π型網絡的零相位技術測量石英晶體單元的參數.第1部分:用π型網絡的零相位技術測量石英晶體單元的諧振頻
| Measurement of quartz crystal unit parameters by zero phase technique in a -network - Part 1: Basic method for the measurement of resonance frequency and resonance resistance of quartz crystal units by zero phase technique in a -network (IEC 60444-1:1986 + A1:1999); German version EN 60444-1:1997 + A1:1999
|
| DIN EN 60444-2-1997
| 用π型網絡的零相位技術測量石英晶體元件參數.第2部分:相位偏離法測量石英晶體元件動態電容
| Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 2: Phase offset method for measurement of motional capacitance of quartz crystal units (IEC 60444-2:1980); German version EN 60444-2:1997
|
| DIN EN 60444-3-1997
| 用π型網絡零相位技術測量石英諧振器參數.第3部分:用與并聯電容量Co補償相連的π網絡相位技術測量不超過200
| Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 3: Basic method for the measurement of two-terminal parameters of quartz crystal units up to 200 MHz by phase technique in a pi-network with compensation of the parallel capacitance C<(Index)o> (IEC 60444-3:1986); German version EN 60444-3:1997
|
| DIN EN 60444-4-1997
| 用π型網絡的零相位技術測量石英晶體元件參數.第4部分:頻率達30MHz石英晶體元件負載諧振頻率fL和負載諧振電
| Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 4: Method for the measurement of the load resonance frequency f<(Index)L>, load resonance resistance R<(Index)L> and the calculation of other derived values of quartz crystal units, up to 30 MHz (IEC 60444-4:1988); German version EN 60444-4:1997
|
| DIN EN 60444-5-1997
| 石英晶體元件參數測量.第5部分:自動網絡分析儀和誤差修正技術評定電氣參數的測量方法
| Measurement of quartz crystal unit parameters - Part 5: Methods for the determination of equivalent electrical parameters using automatic network analyser techniques and error correction (IEC 60444-5:1995); German version EN 60444-5:1997
|
| DIN EN 60444-6-1997
| 石英晶體元件參數測量.第6部分:激勵電平相關性測量
| Measurement of quartz crystal unit parameters - Part 6: Measurement of drive level dependence (DLD) (IEC 60444-6:1995); German version EN 60444-6:1997
|
| DIN EN 60444-7-2004
| 石英晶體元件參數的測量.第7部分:石英晶體元件的活性和頻率下降的測量
| Measurement of quartz crystal unit parameters - Part 7: Measurement of activity and frequency dips of quartz crystal units (IEC 60444-7:2004); German version EN 60444-7:2004
|
| DIN EN 60444-8-2004
| 石英晶體元件參數的測量.第8部分:表面安裝的石英晶體元件用測試工具
| Measurement of quartz crystal unit parameters - Part 8: Test fixture for surface mounted quartz crystal units (IEC 60444-8:2003); German version EN 60444-8:2003
|
| DIN EN 60444-9-2007
| 石英晶體元件參數的測量.第9部分:壓電晶體元件諧振的測量
| Measurement of quartz crystal unit parameters - Part 9: Measurement of spurious resonances of piezoelectric crystal units (IEC 60444-9:2007); German version EN 60444-9:2007
|
| DIN EN 60455-3-2-2004
| 電氣絕緣用樹脂基反應性復合物.第3部分:單項材料規范.活頁2:填石英的環氧樹脂復合物
| Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Quartz filled epoxy resinous compounds (IEC 60455-3-2:2003); German version EN 60455-3-2:2003
|
| DIN EN 60679-1-2004
| 經質量評定的石英晶體振蕩器.第1部分:總規范
| Quartz crystal controlled oscillators of assessed quality - Part 1: Generic specification (IEC 60679-1:1997 + A1:2002 + A2:2003); German version EN 60679-1:1998 + A1:2002 + A2:2003
|
| DIN EN 60679-3-2002
| 經質量評估的石英晶體受控振蕩器.第3部分:標準外形和引線連接件 (IEC 60679-3:2001); 德文版本 EN 60679-3:
| Quartz crystal controlled oscillators of assessed quality - Part 3: Standard outlines and lead connections (IEC 60679-3:2001); German version EN 60679-3:2001
|
| DIN EN 60679-4-1-1998
| 經質量評定的石英晶體控制振蕩器.第4-1部分:空白詳細規范.能力認可
| Quartz crystal controlled oscillators of assessed quality - Part 4-1: Blank detail specification; capability approval (IEC 60679-4-1:1998); German version EN 60679-4-1:1998
|
| DIN EN 60679-4-1998
| 經質量評定的石英晶體控制振蕩器.第4部分:分規范.能力認可
| Quartz crystal controlled oscillators of assessed quality - Part 4: Sectional specification - Capability approval (IEC 60679-4:1997); German version EN 60679-4:1998
|
| DIN EN 60679-5-1-1999
| 經過質量評定的石英晶體控振蕩器.第5-1部分:空白詳細規范.合格鑒定
| Quartz crystal controlled oscillators of assessed quality - Part 5-1: Blank detail specification; qualification approval (IEC 60679-5-1:1998); German version EN 60679-5-1:1998
|
| DIN EN 60679-5-1999
| 經過質量評定的石英晶體控制振蕩器.第5部分:分規范.合格鑒定
| Quartz crystal controlled oscillators of assessed quality - Part 5: Sectional specification; qualification approval (IEC 60679-5:1998); German version EN 60679-5:1998
|
| DIN EN 60682-1994
| 測量石英鹵鎢燈夾封部溫度的標準方法
| Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps (IEC 60682:1980 + A1:1987); German version EN 60682:1993
|
| DIN EN 60682/A2-1997
| 石英玻璃燈具擠壓溫度的測量方法.修改件2 (IEC 60682:1980/A2:1997); 德文版本 EN 60682:1993/A2:1997
| Method of measuring the pinch temperature of quartz glass lamps; Amendment A2 (IEC 60682:1980/A2:1997); German version EN 60682:1993/A2:1997
|
| DIN EN 60758-2005
| 人造石英晶體.規范和使用指南
| Synthetic quartz crystal - Specifications and guide to the use (IEC 60758:2004); German version EN 60758:2005
|
| DIN EN ISO 10650-1-2006
| 牙科學.動力聚合活化劑.第1部分:石英鎢鹵素燈
| Dentistry - Powered polymerization activators - Part 1: Quartz tungsten halogen lamps (ISO 10650-1:2004); German version EN ISO 10650-1:2005
|
| DIN EN ISO 3262-13-1998
| 涂料的填充料.規范和試驗方法.第13部分:天然石英(已磨碎)
| Extenders for paints - Specifications and methods of test - Part 13: Natural quartz (ground) (ISO 3262-13:1997); German version EN ISO 3262-13:1998
|
| DIN EN ISO 3262-15-2000
| 涂料用填充劑.規范和試驗方法.第15部分:透明石英
| Extenders for paints - Specifications and methods of test - Part 15: Vitreous silica (ISO 3262-15:2000); German version EN ISO 3262-15:2000
|
| DIN EN ISO 3262-19-2000
| 涂料用填充劑.規范和試驗方法.第19部分:沉淀石英
| Extenders for paints - Specifications and methods of test - Part 19: Precipitated silica (ISO 3262-19:2000); German version EN ISO 3262-19:2000
|
| DIN EN ISO 3262-20-2000
| 涂料用填充劑.規范和試驗方法.第20部分:煙化石英
| Extenders for paints - Specifications and methods of test - Part 20: Fumed silica (ISO 3262-20:2000); German version EN ISO 3262-20:2000
|
| DIN EN ISO 3262-21-2000
| 涂料用填充劑.規范和試驗方法.第21部分:石英砂(地下天然石英)
| Extenders for paints - Specifications and methods of test - Part 21: Silica sand (unground natural quartz) (ISO 3262-21:2000); German version EN ISO 3262-21:2000
|
| DIN IEC 60122-2-1-1992
| 頻率控制和選擇用石英晶體元件.第2部分:頻率控制和選擇用石英晶體元件使用導則.第1節:微處理機脈沖源用石英
| Quartz crystal units for frequency control and selection; part 2: guide to use of quartz crystal units for frequency control and selection; Section one: quartz crystal units for microprocessor clock supply; identical with IEC 60122-2-1:1991
|
| DIN IEC 60122-2-1993
| 穩率控制和選擇用石英晶體元件.第2部分:頻率控制和選擇用石英晶體元件使用導則
| Quartz crystal units for frequency control and selection; part 2: guide to the use of quartz crystal units for frequency control and selection; identical with IEC 60122-2:1983
|
| DIN IEC 60122-3-1993
| 頻率控制和選擇用石英晶體元件.第3部分:標準外形和引線連接
| Quartz crystal units for frequency control and selection; part 3: standard outlines and lead connections; identical with IEC 60122-3:1977 (status as of 1991)
|
| DIN IEC 60368-2-1-1993
| 壓電濾波器.第2部分:壓電濾波器使用指南.第1節:石英晶體濾波器
| Piezoelectric filters; part 2: guide to the use of piezoelectric filters; section 1: quartz crystal filters; identical with IEC 60368-2-1:1988
|
| DIN IEC 60679-2-1997
| 石英晶體受控振蕩器.第2部分:石英晶體受控振蕩器使用導則
| Quartz crystal controlled oscillators - Part 2: Guide to the use of quartz crystal controlled oscillators (IEC 60679-2:1981)
|
| DIN IEC 61080-1993
| 石英振蕩器等效電參數測量指南
| Guide to the measurement of equivalent electrical parameters of quartz crystal units; identical with IEC 61080:1991
|
| DIN IEC 61178-2-1-1995
| IEC電子元器件質量評定體系規范(IECQ).石英晶體組件.第2部分:分規范:能力認可.第1節:空白詳細規范
| A specification in the IEC quality assessment system for electronic components (IECQ) - Quartz crystal units - Part 2: Sectional specification, capability approval; section 1: Blank detail specification; identical with IEC 61178-2-1:1993
|
| DIN IEC 61178-2-1995
| IEC電子元器件質量評定體系規范(IECQ).石英晶體組件.第2部分:分規范:能力批準
| A specification in the IEC quality assessment system for electronic components (IECQ) - Quartz crystal units - Part 2: Sectional specification, capability approval; identical with IEC 61178-2:1993
|
| DIN IEC 61178-3-1-1995
| 石英晶體單元.IEC電子元器件質量評定體系規范(IECQ).第3部分:分規范:合格驗收.第1節:空白詳細規范
| A specification in the IEC quality assessment system for electronic components (IECQ) - Quartz crystal units - Part 3: Sectional specification, qualification approval; section 1: Blank detail specification; identical with IEC 61178-3-1:1993
|
| DIN IEC 61178-3-1995
| IEC電子元器件質量評定體系規范(IECQ).石英晶體組件.第3部分:分規范:合格鑒定批準
| A specification in the IEC quality assessment system for electronic components (IECQ) - Quartz crystal units - Part 3: Sectional specification, qualification approval; identical with IEC 61178-3:1993
|
| 編號 | 中文名稱 | 英文名稱 |
|---|