| 編號 | 中文名稱 | 英文名稱 |
|---|
| DIN 11483-2-1984
| 乳品設備.清潔和消毒.對密封材料的影響的條件
| Dairy installations; cleaning and disinfection; consideration of the action on sealing materials
|
| DIN 11861-1976
| 飲料和乳品用管件.橡膠密封圈.要求和試驗
| Drink- and dairy fittings; sealing rings made of elastomeric materials, requirements testing
|
| DIN 12256-1977
| 實驗室玻璃儀器.球形接口和旋塞的螺旋連接的密封性檢驗
| Laboratory glassware; tightness test of conical joints, spherical joints and stopcocks
|
| DIN 14307-1-1985
| 帶壓力用密封圈的鋁合金C型剛性聯接器.標稱壓力16
| Aluminium alloy solid coupling type C, with sealing ring for pressure purposes; nominal pressure 16
|
| DIN 14307-2-1986
| 抽吸用C型、標稱壓力16帶密封圈的鋁合金剛性接頭
| Aluminium alloy solid coupling type C with sealing ring for suction purposes; nominal pressure 16
|
| DIN 14308-1-1985
| 帶壓力用密封圈的鋁合金B(yǎng)型剛性聯接器.標稱壓力16
| Aluminium alloy solid coupling type B, with sealing ring for pressure purposes; nominal pressure 16
|
| DIN 14308-2-1986
| 抽吸用B型、標稱壓力16帶密封圈的鋁合金剛性接頭
| Aluminium alloy solid coupling type B with sealing ring for suction purposes; nominal pressure 16
|
| DIN 14309-1985
| 標稱壓力為16帶壓力吸水密封環的A型鋁合金聯接器
| Aluminium alloy solid coupling type A, with sealing ring for pressure and suction purposes; nominal pressure 16
|
| DIN 14317-1985
| 標稱壓力為16、帶金屬密封面和灰鑄鐵或鋁合金蓋的C型鋁合金剛性聯接器
| Aluminium alloy solid coupling type C with metallic sealing area and with cast iron cover or with aluminium alloy cover, type C; nominal pressure 16
|
| DIN 14318-1985
| 帶鑄鐵或鋁合金蓋的有金屬密封面的B型鋁合金剛性聯接器PN16
| Aluminium alloy solid coupling type B with metallic sealing area and with cast iron cover or with aluminium alloy cover, type B; nominal pressure 16
|
| DIN 14319-1985
| 鋁合金帶金屬密封面和灰鑄鐵或鋁合金蓋的A型固定聯接器.公稱壓力 16
| Aluminium alloy solid coupling type A with metallic sealing area and with cast iron or with aluminium alloy cover, type A; nominal pressure 16
|
| DIN 14800-10-2005
| 消防和救援車輛用消防設備.第10部分:密封箱
| Fire-fighting equipment for fire-fighting and rescue service vehicles - Part 10: Sealing chest
|
| DIN 15092-1982
| 起重機.驅動輪裝置及從動輪裝置.密封蓋
| Cranes; driving wheel units and idler wheel units; sealing covers
|
| DIN 16726-1986
| 塑料屋頂板.塑料密封板.檢驗
| Plastic roofing felt and waterproofing sheet; testing
|
| DIN 16729-1984
| 由乙烯共聚物瀝青(ECB)制成的塑料屋頂薄板材和塑料密封薄板材.要求
| Ethylene copolymer bitumen (ECB) plastic roofing sheeting and plastic sealing sheeting; requirements
|
| DIN 16831-7-2004
| 聚(異)丁烯壓力管道用管道配件和連接組件.PB 125型.第7部分:承插焊接用套管、法蘭和密封環組件的尺寸
| Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 7: Dimensions of bushings, flanges and selaing elements for socket welding
|
| DIN 16962-12-1999
| 聚丙烯(PP)制壓力管道用管連接件和零件.PP-H 100,PP-B 80和PP-R 80.第12部分:承口焊接用凸緣接頭、法蘭、密
| Pipe joints and components of polypropylene (PP) for pipes under pressure, PP-H 100, PP-B 80 and PP-R 80 - Part 12: Flange adapters, flanges, sealing rings for socket welding; dimensions
|
| DIN 16962-4-1988
| 1型和2型聚丙烯壓力管道用管道連接組件和管道配件.第4部分:熔焊、法蘭和密封元件管接頭尺寸
| Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions
|
| DIN 16963-11-1999
| 聚乙烯(PE)制壓力管道用管連接件和零件.PE 80和PE 100.第11部分:承口焊接用凸緣接頭、法蘭、密封圈.尺寸
| Pipe joints and components of polyethylene (PE) for pipes under pressure, PE 80 and PE 100 - Part 11: Flange adapters, flanges, sealing rings for socket welding; dimensions
|
| DIN 16963-4-1988
| 高密度聚乙烯壓力管道用管道連接組件和管道配件.第4部分:熔焊、法蘭和密封元件管接頭尺寸
| Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions
|
| DIN 16966-6-1982
| 玻璃纖維增強聚酯樹管(UP-GF)管件和接頭組件.卡圈、法蘭、密封圈、尺寸
| Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; collars, flanges, joint rings, dimensions
|
| DIN 18195 Bb.1-2006
| 建筑物防水.密封劑定位控制一致性的例子
| Water-proofing of buildings - Examples of positioning of sealants in accordance
|
| DIN 18531-1-2005
| 屋頂?shù)姆浪?無用屋頂?shù)拿芊饧?第1部分:術語和定義、要求和設計原則
| Waterproofing of roofs - Sealings for non-utilized roofs - Part 1: Terms and definitions, requirements, design principles
|
| DIN 18531-2-2005
| 屋頂?shù)姆浪?無用屋頂?shù)拿芊饧?第2部分:材料
| Waterproofing of roofs - Sealings for non-utilized roofs - Part 2: Materials
|
| DIN 18531-3-2005
| 屋頂?shù)姆浪?無用屋頂?shù)拿芊饧?第3部分:設計、材料搬運和密封
| Waterproofing of roofs - Sealings for non-utilized roofs - Part 3: Design, handling of materials, execution of sealings
|
| DIN 18531-4-2005
| 屋頂?shù)姆浪?無用屋頂?shù)拿芊饧?第4部分:維護
| Waterproofing of roofs - Sealings for non-utilized roofs - Part 4: Maintenance
|
| DIN 18540-2006
| 建筑物用填縫密封劑的外墻接合處密封
| Sealing of exterior wall joints in building using joint sealants
|
| DIN 18541-1-2006
| 現場水泥接縫密封用熱塑性塑料制造的止水帶.第1部分:術語和定義、形狀、尺寸、標記
| Termoplastic water stops for sealing joints in in-situ concrete - Part 1: Terms and definitions, shapes, dimensions, marking
|
| DIN 18541-2-2006
| 現場水泥接縫密封用熱塑性塑料制造的止水帶.第2部分:要求、試驗和檢查材料
| Thermoplastic water stops for sealing joints in in-situ concrete - Part 2: Material requirements, testing and inspection
|
| DIN 18542-1999
| 泡沫塑料制浸漬密封帶用于外壁接縫時的密封性.浸漬密封帶.要求和檢驗
| Sealing of outside wall joints with impregnated sealing tapes made of cellular plastics - Impregnated sealing tapes - Requirements and testing
|
| DIN 18545-1-1992
| 采用密封劑的窗玻璃.框槽的要求
| Glazing with sealants; rebates; requirements
|
| DIN 18545-2-2001
| 門窗玻璃密封劑密封.第2部分:密封劑命名、要求和試驗
| Sealing of glazings with sealants - Part 2: Sealants, designation, requirements, testing
|
| DIN 18545-3-1992
| 采用密封劑的窗玻璃.框槽.鑲玻璃裝置
| Glazing with sealants; rebates; glazing systems
|
| DIN 19534-3-2000
| 非壓力地下排水和污水排放用帶環形密封承口的硬聚氯乙烯(PVC-U)管和管件.第3部分:質量控制和安裝
| Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) with ring seal socket for non pressure underground drainage and sewerage - Part 3: Quality control and installation
|
| DIN 20006-1989
| 采礦用管道.符合DIN20002的鋼管材和符合DIN20003的連接件用密封圈
| Pipeline for mining; sealings for steel tubes according to DIN 20002 and fittings according to DIN 20003
|
| DIN 20013-1989
| 氣動充填管的密封件
| Sealings for pneumatic stowing pipes
|
| DIN 22419-2-2004
| 用于潛在爆炸性環境的采掘電氣裝置.電纜引入線.第2部分:引入線用密封接頭.安全要求和檢驗
| Electrical apparatus for potentially explosive atmospheres for mining - Cable entries - Part 2: Gland adaptors for entries; safety requirements and testing
|
| DIN 22419-3-2004
| 用于潛在爆炸性環境的采掘電氣裝置.電纜引入線.第3部分:引入線用密封法蘭.安全要求和檢驗
| Electrical apparatus for potentially explosive atmospheres for mining - Cable entries - Part 3: Gland flanges for entries; safety requirements and testing
|
| DIN 25426-1-1988
| 密封式放射性材料.第1部分:要求和分類
| Sealed radioactive sources; requirements and classification
|
| DIN 25426-2-1992
| 密封的放射源.對特殊形狀的放射性材料的要求
| Sealed radioactive sources; special form radioactive material, requirements
|
| DIN 25426-3-1991
| 密封放射性材料.第3部分:當作生產和原型試驗一部分的滲漏試驗方法
| Sealed radioactive sources; leakage test methods as part of production and prototype testing
|
| DIN 25426-4-1995
| 密封的輻射源.第4部分:循環檢驗的泄漏試驗方法
| Sealed radioactive sources - Part 4: Leakage test methods for recurrent inspections
|
| DIN 25493-1997
| 核設施.防止金屬部件表面受到組裝工具、密封、裝璜、包裝材料和隔熱材料的損傷
| Nuclear facilities - Protection of metallic surfaces of structural parts from damage from assembly aids, gaskets, packings, packaging material and thermal insulating materials
|
| DIN 2695-2002
| 法蘭連接用隔板焊接密封件和焊接環形密封件
| Diaphragm-weld packings and weld ring seals for flange connections
|
| DIN 27205-11-2005
| 鐵路車輛的狀況.制動器.第11部分:動力牽引裝置上直接制動和所連接車輛上間接制動用制動器的功能和密封性
| State of railway vehicles - Brake - Part 11: Function and tightness of the brake for direct braking on powered traction unit and indirect braking on connected vehicles
|
| DIN 27205-12-2006
| 鐵路車輛的狀況.第12部分:鐵路機車制動器的功能和密封性
| State of railway vehicles - Brake - Part 12: Function and tightness of railway vehicle brakes
|
| DIN 28090-2-1995
| 法蘭連接件的靜態密封墊.第2部分:板材制密封墊.質量保證的特殊試驗程序
| Static gaskets for flange connections - Part 2: Gaskets made from sheets; special test procedures for quality assurance
|
| DIN 28090-3-1995
| 法蘭連接件的靜態密封墊.第3部分:板材制密封墊:耐化學性的試驗程序
| Static gaskets for flange connections - Part 3: Gaskets made from sheets; chemical resistance test procedures
|
| DIN 28091-1-1995
| 密封板的交貨技術條件.第1部分:密封材料.一般要求
| Technical delivery conditions for gasket sheets - Part 1: Gasket materials; general requirements
|
| DIN 28091-2-1995
| 密封板的交貨技術條件.第2部分:纖維基密封材料.要求和試驗
| Technical delivery conditions for gasket sheets - Part 2: Fibre-based gasket materials (FA); requirements and testing
|
| DIN 28091-3-1995
| 密封板的交貨技術條件.第3部分:聚四氟乙烯基密封材料.要求和試驗
| Technical delivery conditions for gasket sheets - Part 3: PTFE-based gasket materials (TF); requirements and testing
|
| DIN 28091-4-1995
| 密封板的交貨技術條件.第4部分:膨脹石墨基密封材料.要求和試驗
| Technical delivery conditions for gasket sheets - Part 4: Expanded graphite-based gasket materials (GR); requirements and testing
|
| DIN 28138-1-2006
| 攪拌器軸的滾動機構密封.第1部分:碳鋼或不銹鋼.使用數據、組裝尺寸
| Rotating mechanical seals for agitator shafts - Part 1: Carbon or stainless steel - Operating data, assembly dimensions
|
| DIN 28138-2-2006
| 攪拌器軸的滾動機構密封.第2部分:線紋玻璃鋼.使用數據、組裝尺寸
| Rotating mechanical seals for agitator shafts - Part 2: Steel, glass-lined - Operating data, assembly dimensions
|
| DIN 28138-3-2006
| 攪拌器軸的滾動機構密封件.第3部分:旋轉機械密封的障礙液體、冷卻、裝配和命名系統的連接器
| Rotating mechanical seals for agitator shafts - Part 3: Connections for barries fluids, cooling, control and mounting and designation system for rotating mechanical seals
|
| DIN 28148-1992
| 搪瓷鋼制攪拌容器的聚四氟乙烯外殼密封
| PTFE envelope gaskets for glass lined agitator vessels
|
| DIN 28154-1983
| 旋轉機械密封的碳鋼和不銹鋼攪拌器的軸端.尺寸
| Shaft end for carbon and stainless steel agitators, for rotating mechanical seals; dimensions
|
| DIN 28162-1-1983
| 帶旋轉機構密封的攪拌器傳動裝置用攪拌器齒輪托架
| Agitator gear stools for agitator drives with a rotating mechanical seal
|
| DIN 28162-2-1983
| 帶填料蓋密封的攪拌器傳動裝置用攪拌器齒輪托架
| Agitator gear stools for agitator drives with gland sealing
|
| DIN 28192-1994
| 管狀熱交換器用橡膠隔板密封件
| Elastic pass partition gaskets for tubular heat exchangers
|
| DIN 28463-1987
| 油罐車的安裝法蘭.密封墊
| Flanges for tank trucks; gaskets
|
| DIN 28601-2000
| 延性鑄鐵管道和配件.螺紋套管接頭.組件、套管、螺絲環、密封環和滑動環
| Ductile iron pipes and fittings - Screwed socket joints - Assembly, sockets, screw rings, sealing rings and slip rings
|
| DIN 28602-2000
| 球墨鑄鐵管及管件.栓接壓蓋密封接頭.組件、套管、中間環、密封圈、螺栓和螺母
| Ductile iron pipes and fittings - Bolted gland joints - Assembly, sockets, counter ring, sealing ring, bolts and nuts
|
| DIN 28603-2002
| 可鍛鑄鐵管道和配件.插入式連接件.測量、管座和密封墊
| Ductile iron pipes and fittings - Push-in joints - Survey, sockets and gaskets
|
| DIN 30658-1-1998
| 地下煤氣管道接頭附加密封材料.第1部分:已密封煤氣管道附加密封用塑料薄膜和織物襯套.安全要求和試驗
| Materials for the subsequent sealing of joints in underground gas mains - Part 1: Plastic foil and textile fibre linings used to seal gaspipes already in place; safety requirements and testing
|
| DIN 30658-2-1999
| 地下煤氣管道用后續密封材料.第2部分:地下煤氣管道接頭用后續密封材料.安全要求和試驗
| Materials for the subsequent sealing of underground gas mains - Part 2: Materials for the subsequent sealing of joints in underground gas mains; safety requirements and testing
|
| DIN 30660-1999
| 供氣、供水及水暖設備用密封材料.家用設施金屬螺紋連接用非硬化連接密封材料和聚四氟乙烯密封帶
| Sealing materials for gas and water supply as well as water heating systems - Non-hardening jointing compounds and polytetrafluoroethylene (PTFE) tapes for metallic threaded joints in domestic installations
|
| DIN 31692-5-2000
| 滑動軸承.第5部分:油密封性檢驗用檢查表
| Plain bearings - Part 5: Check list for verification of oil tightness
|
| DIN 3236-1-1994
| 分流器法蘭密封管座的直排型閥門.第1部分:無襯
| Straight pattern valves with flange socket placed in shunt - Part 1: Without lining
|
| DIN 3236-2-1996
| 分流器中帶法蘭密封的流量觀查孔玻璃閥門.第1部分:琺瑯襯
| Straight pattern valves with flange socket placed in shunt - Part 2: With enamel lining
|
| DIN 3237-1-1994
| 主電源連接的法蘭密封管座直排型閥門.第1部分:無襯
| Straight pattern valves with flange socket in main power connection - Part 1: Without lining
|
| DIN 3237-2-1994
| 主電源連接的法蘭密封管座直排型閥門.第2部分:帶塑料內襯
| Straight pattern valves with flange socket in main power connection - Part 2: With plastic lining
|
| DIN 3237-3-1996
| 主電源連接裝置帶法蘭密封的流量觀察孔玻璃閥門.第3部分:帶橡膠外皮
| Straight pattern valves with flange socket in main power connection - Part 3: With rubber lining
|
| DIN 3528-1986
| 煤氣裝置用閥門.帶密封墊的噴嘴
| Valves for gas installations; nozzles with gasket
|
| DIN 3535-1-1991
| 煤氣供氣密封件:家用設備煤氣閥門用彈性密封材料:要求和檢驗
| Sealants for gas supplies; elastomeric gasket materials for gas valves in domestic installations; requirements and tests
|
| DIN 3535-5-1993
| 煤氣供氣密封件:煤氣管件和煤氣設備用橡膠、軟木和合成纖維制密封材料.安全性試驗要求
| Sealants for gas supply; sealing materials of rubber, cork and synthetic fibres for gas armatures and gas appliances; safety requirements, tests
|
| DIN 3535-6-1999
| 供氣用密封墊.第6部分:氣閥、煤氣設備和煤氣主管道用基于合成纖維、石墨或聚四氟乙烯的密封墊材料
| Gaskets for gas supply - Part 6: Gasket materials based on synthetic fibres, graphite or polytetrafluoroethylen (PTFE) for gas valves, gas appliances and gas mains
|
| DIN 3750-1957
| 密封件.術語
| Seals; terms
|
| DIN 3760-1996
| 旋轉軸唇形密封環
| Rotary shaft lip type seals
|
| DIN 3761-1-1984
| 汽車用唇型旋轉軸密封件.第1部分:術語、公式符號、公差
| Rotary shaft lip type seals for automobils; terms, formula symbols, tolerances
|
| DIN 3761-10-1984
| 汽車用唇型旋轉軸密封件.第10部分:試驗.試驗機器和規范
| Rotary shaft lip type seals for automobils; test; test machines and specifications
|
| DIN 3761-11-1984
| 汽車用唇型旋轉軸密封件.第11部分:試驗.泄漏評價
| Rotary shaft lip type seals for automobils; test; evaluation of leakage
|
| DIN 3761-12-1984
| 汽車用唇型旋轉軸密封件.試驗.彈性體壓痕硬度的測定.第12部分:顯微硬度試驗
| Rotary shaft lip type seals for automobils; test; determination of indentation hardness of elastomers; micro hardness test
|
| DIN 3761-13-1984
| 汽車用唇型旋轉軸密封件.第13部分:彈性體硫化狀態的試驗
| Rotary shaft lip type seals for automobils; test for curing state of elastomers
|
| DIN 3761-14-1984
| 汽車用旋轉軸唇型密封件.檢驗.彈性體的紅外光譜分析
| Rotary shaft lip type seals for automobils; test; infrared-spectroscopic analysis of elastomers
|
| DIN 3761-15-1984
| 汽車用唇型旋轉軸密封環.試驗.彈性體耐寒性能測定.差熱分析
| Rotary shaft lip type seals for automobils; test; determination of cold resistant of elastomers; differential-thermoanalysis
|
| DIN 3761-2-1983
| 汽車用唇型旋轉軸密封件.第2部分:應用
| Rotary shaft lip type seals for automobils; applications
|
| DIN 3761-3-1984
| 汽車用唇型旋轉軸密封件.第3部分:材料要求和試驗方法
| Rotary shaft lip type seals for automobils; material requirements and methods of test
|
| DIN 3761-4-1984
| 汽車用唇型旋轉軸密封件.第4部分:目測的不規則性
| Rotary shaft lip type seals for automobils; visual irregularities
|
| DIN 3761-5-1984
| 汽車用唇型旋轉軸密封件.第5部分:試驗.測量要求和儀器
| Rotary shaft lip type seals for automobils; test; measuring requirements and -instruments
|
| DIN 3761-6-1984
| 汽車用唇型旋轉軸密封件.第6部分:試驗.外徑測量儀
| Rotary shaft lip type seals for automobils; test; outside-diameter measuring instrument
|
| DIN 3761-7-1984
| 汽車用唇型旋轉軸密封件.第7部分:試驗.錐度測量心棒
| Rotary shaft lip type seals for automobils; test; skittle measuring mandrel
|
| DIN 3761-8-1984
| 汽車用唇型旋轉軸密封件.第8部分:試驗.軸截面設計
| Rotary shaft lip type seals for automobils; test; carrying out axle-sections
|
| DIN 3761-9-1984
| 汽車用唇型旋轉軸密封件.第9部分:試驗.數字式徑向力測量儀
| Rotary shaft lip type seals for automobils; test; radial force measuring instrument digital
|
| DIN 3771-1-1984
| 流體系統.Ｏ型密封圈.尺寸按ISO 3601/1
| Fluid systems; O-rings; dimensions as in ISO 3601/1
|
| DIN 3771-2-1984
| 流體系統.Ｏ型密封圈.試驗、標志
| Fluid systems; O-rings; test, marking
|
| DIN 3771-3-1984
| 流體系統.Ｏ型密封圈.材料、使用范圍
| Fluid systems; O-rings; materials, field of application
|
| DIN 3771-4-1984
| 液壓系統.Ｏ型密封圈.質量驗收準則
| Fluid systems; O-rings; quality acceptance criteria
|
| DIN 3780-1954
| 密封件和填料.填料函直徑及相關填料寬度.結構尺寸表
| Seals and Packings; Stuffing Box Diameters and Related Packing Widths, Design Sheet
|
| DIN 3865-2002
| 壓合接頭.符合 DIN EN ISO 8434-1 的壓接用帶 'O' 型密封圈的24度螺紋接頭
| Compression fittings - Nipple 24° with O-ring - For compression joint according to DIN EN ISO 8434-1
|
| DIN 3869-1994
| 型面密封環
| Profil sealing rings
|
| DIN 3942-2002
| 非焊接的壓合接頭.符合 DIN EN ISO 8434-1 的壓接端頭的設計和定型用可調節的帶24度錐形聯接器和 'O' 型密
| Non-soldered compression fittings - Swivel elbows with 24° cone connectors with O-ring - Adjustable, for design and type of compression end according to DIN EN ISO 8434-1
|
| DIN 3943-2002
| 非焊接的壓合接頭.符合 DIN EN ISO 8434-1 的壓接端頭的設計和定型用可調節的帶24度錐形聯接器和 'O' 型密
| Non-soldered compression fittings - Swivel branch tees with 24° cone connectors with O-ring - Adjustable, for design and type of compression end according to DIN EN ISO 8434-1
|
| DIN 3944-2002
| 非焊接的壓合接頭.符合 DIN EN ISO 8434-1 的壓接端頭的設計和定型用可調節的帶24度錐形聯接器和 'O' 型密
| Non-soldered compression fittings - L-adaptors with 24° cone connectors and O-ring - Adjustable, for design and type of compression end according to DIN EN ISO 8434-1
|
| DIN 3945-2002
| 非焊接的壓合接頭.符合 DIN EN ISO 8434-1 的壓接端頭的設計和定型用帶24度錐形聯接器和 'O' 型密封圈的直
| Non-soldered compression fittings - Straight stud swivel adaptor with 24° cone connectors with O-ring - For design and type of compression end according to DIN EN ISO 8434-1
|
| DIN 3946-2002
| 非焊接的壓合接頭.符合 DIN EN ISO 8434-1 的壓接端頭的設計和定型用帶24度錐形聯接器和 'O' 型密封圈的直
| Non-soldered compression fittings - Straight reducing swivel adaptors with 24° cone connectors with O-ring - For design and type of compression end according to DIN EN ISO 8434-1
|
| DIN 4000-7-1984
| 第7部分:密封墊用物品特性表格設計
| Tabular layouts of article characteristics for gaskets
|
| DIN 4060-1998
| 帶彈性密封件的下水道和污水管用接頭.對彈性密封件的接頭的要求和試驗
| Joints of sewer and drain pipes with elastomeric seals - Requirements and testing on joints with elastomeric seals
|
| DIN 40768-1969
| 鹼性蓄電池.6V和12V密封式鎳鎘蓄電池，帶膠紙板的鈕扣式電池.容量、主要尺寸和技術參數
| Alkaline storage batteries; 6 V and 12 V sealed nickel-cadmium batteries, button cells with pasted plates, capacities, main dimensions, technical data
|
| DIN 4102-9-1990
| 建筑材料和構件易燃性.電纜抗穿透密封.術語 、要求和試驗
| Fire behaviour of building materials and elements; seals for cable penetrations; concepts, requirements and testing
|
| DIN 42673-2-1983
| IMB3型帶滾動軸承全密封風扇冷卻鼠籠三相感應電機.相關框架尺寸.防爆高安全"E"型輸出功率
| Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 3, with rolling bearings; relationship frame sizes - output ratings for type of protection increased safety "e"
|
| DIN 42673-3-1983
| IMB3型帶滾動軸承全密封風扇冷卻鼠籠三相感應電機.相關框架尺寸.防火外殼"d"型輸出功率
| Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 3, with rolling bearings; relationship frame sizes - output ratings for type of protection flameproof enclosure "d"
|
| DIN 42677-2-1983
| 帶滾動軸承的IM B 5、 IMB10、IMB14型全密封風扇冷卻鼠籠式三相感應電機.相關框架規格－提高防護安全性"E"
| Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 5, IM B 10, IM B 14, with rolling bearings; relationship frame sizes - output ratings for type of protection increased safety "e"
|
| DIN 42677-3-1983
| 帶滾動軸承的IM B 5、 IMB10、IMB14型全密封風扇冷卻鼠籠式三相感應電機.相關框架規格－防火外殼體“d"型的
| Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 5, IM B 10, IM B 14, with rolling bearings; relationship frame sizes - output ratings for type of protection flameproof enclosure "d"
|
| DIN 43534-1983
| 鉛蓄電池.免維護、密封、固定電解液.額定容量、電壓、主要尺寸、詳細結構、要求
| Lead storage batteries; maintenance-free, sealed, immobilized electrolyte; rated capacities, voltages, main dimensions, construction-details, requirements
|
| DIN 43539-5-1984
| 蓄電池.試驗.采用柵極板和不流動電解液的免維護密封鉛蓄電池
| Accumulators; tests; sealed lead storage batteries with grid type plates and immobilized electrolyte, maintenance free; test methods
|
| DIN 442-1970
| 密封膨脹蓋
| Sealing Expanding Caps
|
| DIN 443-1970
| 密封壓入蓋
| Sealing Push-in Caps
|
| DIN 470-1974
| 密封墊圈
| Sealing Washers
|
| DIN 47629-1986
| 通訊電纜用的壓力密封堵塞塊.要求和試驗
| Pressure-tight blockstops for telecommunication cables; requirements, tests
|
| DIN 49984-1954
| 電照明設備.符合DIN49993 的帶法蘭邊的照明設備玻璃罩的外型密封環
| Electric luminaires; profile sealing ring for luminaire glasses with flanged edges according to DIN 49993
|
| DIN 5065-1987
| 包裝.金屬及塑料軟管用端口塑料密封物
| Packaging; plastic closures for metal and plastic tubes
|
| DIN 5080-1978
| 家用保藏罐和保藏瓶.橡膠密封圈
| Preserving jars and bottles for domestic purposes; rubber seal rings
|
| DIN 52451-1-2007
| 建筑物用密封材料的試驗.第1部分:自流平填縫材料質量和體積變化的測定
| Testing of sealing materials for buildings - Part 1: Determination of change in mass and volume of self-levelling joint sealants
|
| DIN 52452-1-1989
| 建筑物密封材料與其他建筑材料的相容性測試
| Testing of building sealants for compatibility with construction materials
|
| DIN 52452-2-1993
| 建筑業中密封材料檢驗.密封材料的兼容性.與化學制品的兼容性
| Testing of sealants in building construction; compatibility of sealants; compatibility with chemicals
|
| DIN 52452-4-1992
| 建筑結構用密封材料的檢驗.密封材料的兼容性.與其他防護涂層材料的可混用性
| Testing of sealing compounds in building constructions; compatibility of sealing products; compatibility with other protection coatings
|
| DIN 52453-2-1977
| 房屋結構中密封和裝玻璃用嵌縫料的檢驗.粘合劑的流動.紙過濾法
| Testing of sealing compounds for sealing and glazing in building constructions; migration of binder, paper filter method
|
| DIN 52455-1-2003
| 建筑業密封材料試驗.粘合和膨脹試驗.第1部分:標準氣候、水或高溫預處理
| Testing of sealing compounds in buildings constructions - Adhesion and expansion test - Part 1: Conditioning in standard atmospheres, water,or increased temperatures
|
| DIN 52455-3-1998
| 建筑結構中密封劑的試驗.粘附試驗和伸長試驗.第3部分:透過玻璃光線的影響
| Testing of sealants in building construction - Adhesion and extension test - Part 3: Influence of light through glass
|
| DIN 52459-1981
| 建筑密封材料的檢驗.回填材料吸水性的測定.蓄水能力
| Testing of building sealants; determination of the water absorption of backfill material; retentive capacity
|
| DIN 52460-2000
| 密封和窗用玻璃.術語
| Sealing and glazing - Terms
|
| DIN 52461-2000
| 建筑施工中密封化合物的試驗.新用的可噴接縫產品的耐雨強度
| Testing of sealing compounds in building construction - Rain strength of just applied sprayable jointing products
|
| DIN 54115-1 Bb.1-2006
| 無損檢驗.密封放射性源技術應用射線防護規則.第1部分:γ放射線照相裝置的固定和可移動裝卸.控制范圍的估算
| Non-destructive testing - Radiation protection rules for the technical application of sealed radioactive sources - Part 1: Stationary and mobile handling for gamma-radiography; Estimating of control regions
|
| DIN 54115-1-2006
| 無損檢驗.密封放射性源技術應用射線防護規則.第1部分:γ放射線照相裝置的固定和可移動裝卸
| Non-destructive testing - Radiation protection rules for the technical application of sealed radioactive sources - Part 1: Stationary and mobile handling for gamma-radiography
|
| DIN 54115-3-2006
| 無損檢驗.密封放射性源技術應用射線防護規則.第3部分:γ放射線照相裝置在裝卸和運輸過程中射線防護的組織
| Non-destructive testing - Radiation protection rules for the technical application of sealed radioactive sources - Part 3: Organisation of radiation protection during handling and transport for gamma-radiography
|
| DIN 54115-4-2006
| 無損檢驗.密封放射性源技術應用射線防護規則.第4部分:γ放射線照相用可移動裝置的制造和試驗
| Non-destructive testing - Radiation protection rules for the technical application of sealed radioactive sources - Part 4: Construction and testing of mobile apparatus for gamma-radiography
|
| DIN 54115-5-1992
| 無損檢驗.密封放射性源技術應用的輻射防護規則.γ射線照相的輻射預防措施的建立
| Non-destructive testing; radiation protection rules for the technical application of sealed radioactive sources; building precautionary measures of radiation for the gamma-radiography
|
| DIN 54115-6-2006
| 無損檢驗.密封放射源技術應用射線防護規則.第6部分:γ放射線照相用可移動裝置的檢驗、維修和功能試驗
| Non-destructive testing - Radiation protection rules for the technical application of sealed radioactive sources - Part 6: Inspection, service and functional test of mobile apparatus for gamma-radiography
|
| DIN 5514-3-1980
| 有軌車輛材料.彈性體.功能組.永久性門窗密封件.窗型材.系列規范
| Materials for railway vehicles; elastomers, functional group: permanent door and window seals, specification group
|
| DIN 5514-4-1982
| 鐵路車輛用材料.彈性體.功能組：非永久性門和窗用密封件.規格類別
| Materials for railway vehicles; elastomers; functional group: non permanent door and window seals; specification groups
|
| DIN 55479-2000
| 包裝.用壓敏膠粘帶和膠紙帶密封紙板盒和包裝箱的種類
| Packaging - Types of sealings of cartons and boxes by means of pressure-sensitive adhesive tape and gummed paper tape
|
| DIN 55529-2005
| 包裝.測定軟包裝材料制密封件的密封接縫強度
| Packaging - Determining the sealed-seam strength of sealings made of flexible packaging material
|
| DIN 5569-1-1997
| 軌道車輛.帶滾柱軸承和密封墊圈的外裝式輪對軸承.第1部分:綜覽和配置
| Rail vehicles - Externally mounted wheelset-bearings with cylindrical roller bearings and labyrinth-gasket - Part 1: Summary and layout
|
| DIN 5569-2-1997
| 軌道車輛.帶滾柱軸承和密封墊圈的外裝式輪對軸承.第2部分:零部件
| Rail vehicles - Externally mounted wheelset-bearings with cylindrical roller bearings and labyrinth-gasket - Part 2: Component parts
|
| DIN 5588-1-1988
| 軌道車輛用壓縮空氣設備.可法蘭連接的壓縮空氣設備.第1部分:DN 19 和 DN 25 設備用配合尺寸和密封元件
| Compressed air equipment for rail vehicles; flangeable compressed air devices; mating dimensions and sealing elements for DN 19 and DN 25 devices
|
| DIN 5588-2-1988
| 軌道車輛用壓縮空氣設備.可法蘭連接的壓縮空氣設備.第2部分:DN 7 設備用配合尺寸和密封元件
| Compressed air equipment for rail vehicles; flangeable compressed air devices; mating dimensions and sealing elements for DN 7 devices
|
| DIN 58953-7-2003
| 消毒.消毒材料供應.第7部分:消毒紙、非織造的包裝材料、紙袋、耐熱和自密封袋和紙帶盤的使用
| Sterilization - Sterile supply - Part 7: Use of sterilization paper, nonwoven wrapping material, paper bags and heat and self-sealable pouches and reels
|
| DIN 618-2-1993
| 滾針軸承.密封的帶保持架的開端頭拔出套
| Needle roller bearings; drawn cups with open ends with cage, sealed
|
| DIN 65194-1986
| 航空和航天.圓形電氣連接器用密封塞
| Aerospace; sealing plugs for electrical circular connectors
|
| DIN 65203-2001
| 航空航天系列.彈性體O形密封圈.技術規范
| Aerospace series - Elastomeric O-rings - Technical specification
|
| DIN 65229-1979
| 航空航天.密封墊片.技術規范
| Aerospace; gaskets sheets, technical specification
|
| DIN 65262-1-1996
| 航空航天.密封復合材料.第1部分:多硫化物-聚合物基.交貨技術條件
| Aerospace - Sealing compounds - Part 1: Polysulphide polymer base; technical specification
|
| DIN 65262-2-1998
| 航空航天系列.密封化合物.第2部分:偏二氟乙烯-六氟丙烯基.技術規范
| Aerospace series - Sealing compounds - Part 2: Vinylidene fluoride and hexafluoropropylene base; technical specification
|
| DIN 65262-3-1996
| 航空航天系列.密封復合材料.第3部分:硅橡膠基材.交貨技術條件
| Aerospace series - Sealing compounds - Part 3: Silcone-rubber base; technical specification
|
| DIN 65486-1993
| 航空航天.結構用緊固件.旋轉緊固件的機械特性.壓力密封型緊固件總成
| Aerospace; fasteners for structural application; rotary fasteners, mechanical properties; rotary fastener, assembly, pressure-tight
|
| DIN 65493-1993
| 航空航天.結構緊固件.旋轉緊固件.壓力密封式緊固件插孔
| Aerospace; fasteners for structural application; rotary fasteners; receptacle, pressure-tight
|
| DIN 6809-2-1993
| 臨床劑量測定法.密封γ放射源的短距離放射治療
| Clinical dosimetry; Brachytherapy with sealed gamma sources
|
| DIN 6827-2-2003
| 電離輻射醫用記錄.第2部分:不密封放射性材料診斷和治療
| Recording of the medical application of ionizing radiation - Part 2: Diagnosis and therapy using unsealed radioactive materials
|
| DIN 6843-2006
| 搬運醫療設備中未密封的放射性材料的射線防護規則
| Radiation protection rules for handling of unsealed radioactive material in medicine
|
| DIN 6844-1-2005
| 核醫療部門.第1部分:非密封放射源的診斷應用裝置和設備的規則
| Nuclear medicine departments - Part 1: Rules for the installation and equipment for diagnostic applications of unsealed radioactive sources
|
| DIN 6844-2-2005
| 核醫療部門.第2部分:非密封放射源的治療應用裝置和設備的規則
| Nuclear medicine departments - Part 2: Rules for the installation and equipment for therapeutic applications of unsealed radioactive sources
|
| DIN 6871-2-2005
| 正電子放射層析X射線攝影法用回旋加速器系統.第2部分:輻射防護迷宮式密封體和護墻入口
| Cyclotron systems for positron emission tomography - Part 2: Radiation protection labyrinths and wall entrances
|
| DIN 69001-14-1981
| 機床.多軸頭.A至D型軸密封件組件
| Machine tools; Multi-spindle heads; Assemblies, Spindle seals Types A to D
|
| DIN 69001-21-1994
| 機床.多軸頭.E至P型軸密封組件.
| Machine tools; multi-spindle heads; assemblies, spindle seals types E to P
|
| DIN 71511-1992
| 橢圓法蘭的密封墊
| Gaskets for oval flanges
|
| DIN 74286-1988
| 氣壓制動系統.雙管氣壓制動系統的軟管聯結器的密封圈
| Air braking systems; packing rings for hose couplings for double line braking systems
|
| DIN 7584-1980
| 家用安裝水管配件.壓力為10巴的平密封墊帶外螺紋的鋼管接管嘴
| Water-fittings for house installation; steal tube nozzles with external thread, flat sealing up to working pressure of 10 bar
|
| DIN 7585-1980
| 家用安裝水管配件.壓力為10巴的平密封套管
| Water-fittings for house installation; sleeves, flat sealing up to work pressure of 10 bar
|
| DIN 7588-1994
| 家裝設備用水管配件.平密封螺旋接頭.壓力10巴的一端帶內螺紋,另一端帶鋼管噴嘴、銅管噴嘴或套管
| Water-fittings for house installation; boltings with flat seal; one side threaded coupling with inside-thread, on the other side steel tube nozzle, copper tube nozzle or sleeve PN 10
|
| DIN 7589-1994
| 家裝設備用水管配件.平密封螺旋接頭.壓力10巴的一端帶外螺紋,另一端帶鋼管噴嘴、銅管噴嘴和套管
| Water-fittings for house installation; boltings with flat seal; one side threaded coupling with outside-thread, on the other side steel tube nozzle, copper tube nozzle or sleeve PN 10
|
| DIN 7603-2001
| 密封環
| Sealing rings
|
| DIN 7750-1979
| 瓶子桿式塞用橡膠密封圈
| Rubber sealing rings for lever stoppers of bottles
|
| DIN 7754-1978
| 果汁瓶和球形瓶用密封蓋
| Sealing caps for grape-juice bottles and balloons
|
| DIN 78027-1979
| 輪胎氣門（帶O形密封圈）中無內胎卡箍
| Tubeless clamp in tyre valves (with O-ring seal)
|
| DIN 7863-1983
| 非泡沫彈性體裝玻璃和板狀密封條.交貨技術條件
| Non cellular elastomer glazing and panel gaskets; technical delivery conditions
|
| DIN 7865-1-1982
| 混凝土接縫密封用的彈性填縫片.形狀和尺寸
| Elastomeric joint sealing strip for sealing joints in concrete; Shape and dimensions
|
| DIN 7865-2-1982
| 混凝土接縫密封用的彈性填縫片.對材料的要求和檢驗
| Elastomeric joint sealing strip for sealing joints in concrete; Material requirements and testing
|
| DIN 8063-4-1983
| 未增塑聚氯乙烯壓力管道用管連接組件和接頭.內外螺母、法蘭盤、密封件.尺寸
| Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (PVC-U) pressure pipes; bushings, flanges, seals; dimensions
|
| DIN 82331-1998
| 船舶上的通風設備.符合DIN 82330的圓形法蘭盤用密封墊
| Ventilation plants on ships - Gaskets for round flanges according to DIN 82330
|
| DIN 8253-4-1992
| 表用圓形玻璃蓋.礦物玻璃.I型密封墊片.尺寸
| Round glasses for watches; mineral glasses; I-gasket, dimensions
|
| DIN 83106-1984
| 船上重型鉸鏈門和艙口用的密封墊片
| Gaskets for heavy hinged doors on ships and for hatches
|
| DIN 83403-2007
| 船舶貯艙和液體艙的人孔蓋.密封件
| Manhole covers for bunkers and tanks on ships - Seals
|
| DIN 83419-1987
| 擋蓋的彈性密封墊
| Elastomer gaskets for covers
|
| DIN 86056-2001
| 鋼管和銅或銅合金管用鎖緊螺母和密封圈的引入管套筒
| Conduits pipes with sleeve nut and gasket for steel tubes and tubes of copper or copper alloys
|
| DIN 86071-1992
| 法蘭用全密封面墊片.公稱壓力為6、10、16、25
| Full face gaskets for flanges; nominal pressures 6, 10, 16, 25
|
| DIN 86072-1992
| 船用排氣管道.密封墊
| Exhaust gas lines on ships; gaskets
|
| DIN 86129-1986
| 充料管和探測管用焊接蓋板螺紋蓋的螺塞和扁密封圈
| Plug screws and flat sealing rings for welded-in screw caps for filling and sounding pipes
|
| DIN 86263-2000
| Y型,軟密封,承口連接的船用直通閥.DN15-DN50,PN16
| Straight way valves for shipboard use - Y-patten, soft sealing, with socket connection - DN 15 to DN 50, PN 16
|
| DIN 86264-2000
| Y型,軟密封,帶法蘭的短型船用直通閥.DN15-DN200
| Straight way valves for shipboard use - Y-patten, soft sealing, short type with flanges - DN 15 to DN 200
|
| DIN 86265-2000
| Y型,軟密封,普通型帶法蘭的船用直通閥.DN15-DN200
| Straight way valves for shipboard use - Y-patten, soft sealing, normal type, with flanges - DN 15 to DN 200
|
| DIN 87155-1954
| 灰鑄鐵粗濾器.密封圈
| Grey cast-iron coarse filters; sealing rings
|
| DIN 8905-1-1983
| 帶密封和半密封壓縮機的制冷設備用管道.外徑54mm以下.交貨技術條件
| Tubes for refrigerating systems with hermetic and semi-hermetic compressors; outside diameter up to 54 mm; technical delivery conditions
|
| DIN 8905-3-1983
| 帶密封和半密封壓縮機的制冷系統用管道.毛細節流閥的補充交貨技術條件
| Tubes for refrigerating systems with hermetic and semi-hermetic compressors; additional technical delivery conditions for capillary restrictor tubes
|
| DIN 8914-1990
| 制冷系統用40公稱壓力擴口法蘭的非釬焊接壓緊管接頭用的90°錐體密封環和密封蓋
| 90° tapered seal rings and caps for use with PN 40 flared flange solderless compression couplings in refrigerating systems
|
| DIN 89280-1-1992
| 電纜和軟線用密封套.組件
| Glands for cables and cords; assembly
|
| DIN 89280-2-1992
| 電纜和導線用密封套.零件
| Glands for cables and cords; component parts
|
| DIN 89284-2007
| 符合DIN 89280的安裝孔和密封管用帽螺釘.德文和英文本
| Cap srews for mounting holes and glands according to DIN 89280; Text in German and English
|
| DIN 8929-1987
| 家用制冷機和冷凍機的密封壓縮機的連接
| Connections on hermetically sealed compressors for domestic refrigerators and freezers
|
| DIN 89345-2006
| 電纜和絕緣電線用密封套的接地插入件
| Earthing inserts for glands for electrical cables and insulated wires
|
| DIN 89347-1992
| 電纜和軟電線的密封套的墊圈
| Washers for glands for cables and cords
|
| DIN 89349-1992
| 電纜和軟電線密封套的墊片
| Gaskets for glands for cables and cords
|
| DIN 8964-2-2002
| 制冷系統循環部件.第2部分:密封系統.要求
| Circuit elements for refrigerating systems - Part 2: Sealed systems; Requirements
|
| DIN EN 10226-2-2005
| 螺紋上有壓力密封接縫的管螺紋.第2部分:錐形外螺紋和錐形內螺紋.尺寸、公差和名稱與符號
| Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation; German version EN 10226-2:2005
|
| DIN EN 10226-3 Berichtigung 1-2006
| 用螺紋密封的管螺紋.第2部分:用極限量規檢驗
| Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges; German version EN 10226-3:2005, Corrigenda to DIN EN 10226-3:2005-05
|
| DIN EN 10226-3-2005
| 螺紋上有壓力密封接縫的管螺紋.第3部分:通過極限量規驗證
| Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges; German version EN 10226-3:2005
|
| DIN EN 10246-1-1996
| 鋼管無損檢測.第1部分:無縫和焊接鋼管(埋弧焊除外)密封性自動電磁檢驗
| Non-destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness; German version EN 10246-1:1996
|
| DIN EN 10246-2-2000
| 鋼管的無損檢驗.第2部分:證明液壓滲漏密封性的無縫和焊接(埋弧焊接除外)的奧氏體和鐵素體/奧氏體鋼管的自動
| Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and ferritic-austenitic steel tubes for verification of hydraulic leak-tightness; German version EN 10246-2:2000
|
| DIN EN 1107-1-1999
| 防水軟板.尺寸穩定性測定.第1部分:屋頂密封瀝青板
| Flexible sheets for waterproofing - Determination of dimensional stability - Part 1: Bitumen sheets for roof waterproofing; German version EN 1107-1:1999
|
| DIN EN 1108-1999
| 防水軟板.屋頂密封瀝青板.溫度循環形狀穩定性測定
| Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of form stability under cyclical temperature changes; German version EN 1108:1999
|
| DIN EN 1109-1999
| 防水軟板.屋頂密封瀝青板.冷彎性能測定
| Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature; German version EN 1109:1999
|
| DIN EN 1110-1999
| 防水軟板.屋頂密封瀝青板.耐熱性測定
| Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flow resistance at elevated temperature; German version EN 1110:1999
|
| DIN EN 1119-1996
| 塑料管道系統.玻璃纖維增強熱固性塑料(GFK)管和配件.密封性和耐柔性連接和鉸鏈連接磨損能力試驗方法
| Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of flexible and reduced articulation joints; German version EN 1119:1996
|
| DIN EN 116207-1995
| 空白詳細規范:密封式繼電器.用于惡劣的固定環境條件(116205).用于惡劣的易變環境條件(116206).用于惡劣的空
| Blank detail specification: Hermetically sealed relays - For severe static environmental conditions (116205); for severe mobile environmental conditions (116206); for severe airborne environmental conditions (116207); German version EN 116205/116206/116207:1995
|
| DIN EN 116303-1994
| 空白詳細規范.經質量認證的高負荷機電的全有或全無繼電器( 密封式 5A至25A )
| Blank detail specification; electromechanical all-or-nothing heavy load relays of assessed quality (hermetically sealed, 5 A to 25 A); german version EN 116303:1993
|
| DIN EN 1229-1996
| 塑料管道系統.玻璃纖維增強熱固塑料(GFK)管.管壁短期內壓密封性驗證試驗方法
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure; German version EN 1229:1996
|
| DIN EN 12294-1999
| 塑料管道系統.熱水和冷水系統.真空密封性的檢驗方法
| Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum; German version EN 12294:1999
|
| DIN EN 12308-1998
| 液體天然氣設施和設備.液體天然氣管道使用的法蘭連接件的密封墊片的適用性試驗
| Installations and equipment for liquefied natural gas - Suitability testing of gaskets designed for flanged joints used on LNG piping; German version EN 12308:1998
|
| DIN EN 12365-1-2003
| 建筑五金.門、窗、百葉窗和幕墻用密封墊和擋風雨條.第1部分:性能要求和分類
| Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification; German version EN 12365-1:2003
|
| DIN EN 12365-2-2003
| 建筑五金.門、窗、百葉窗和幕墻用密封墊和擋風雨條.第2部分:線性壓力試驗方法
| Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods; German version EN 12365-2:2003
|
| DIN EN 12365-3-2003
| 建筑五金.門、窗、百葉窗和幕墻用密封墊和擋風雨條.第3部分:彎曲回復試驗方法
| Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method; German version EN 12365-3:2003
|
| DIN EN 12365-4-2003
| 建筑五金.門、窗、百葉窗和幕墻用密封墊和擋風雨條.第4部分:加速老化后回復的試驗方法
| Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method; German version EN 12365-4:2003
|
| DIN EN 12373-4-1999
| 鋁和鋁合金.陽極處理.第4部分:采用在酸處理之前用著色點滴試驗密封后陽極化氧化涂層的吸收力損失量的估計
| Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment; German version EN 12373-4:1998
|
| DIN EN 12373-5-1999
| 鋁和鋁合金.陽極處理.第5部分:用測量公差方法對密封的陽極處理氧化涂層進行質量評定
| Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance; German version EN 12373-5:1998
|
| DIN EN 12373-6-1999
| 鋁和鋁合金.陽極處理.第6部分:在預先未進行酸處理情況下涂層在鉻酸/磷酸溶液中浸漬以后通過測定質量損耗對
| Aluminium and aluminium alloys - Anodizing - Part 6: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment; German version EN 12373-6:1998
|
| DIN EN 12373-7-2002
| 鋁及鋁合金.陽極氧化.第7部分:通過磷酸和鉻酸溶液浸漬酸處理后測量質量損失評估密封陽極氧化涂層的質量; 德
| Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment; German version EN 12373-7:2002
|
| DIN EN 12560-2-2001
| 法蘭及其接頭.分級標識法蘭用墊圈.第2部分:鋼法蘭用繞制螺旋形密封墊
| Flanges and their joints - Gaskets for class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges; German version EN 12560-2:2001
|
| DIN EN 12690-1999
| 生物技術.軸密封的性能標準
| Biotechnology - Performance criteria for shaft seals; German version EN 12690:1999
|
| DIN EN 12713-2000
| 標稱容積為20升至60升的塑料容器用帶有螺紋的蓋子密封系統
| Screw cap closure systems for plastics containers with a nominal capacity of 20 l to 60 l; German version EN 12713:2000
|
| DIN EN 12756-2001
| 機械密封件.主要尺寸、名命和材料編碼
| Mechanical seals - Principal dimensions, designation and material codes; German version EN 12756:2000
|
| DIN EN 1277-2004
| 塑料管道系統.用于地下無壓裝置的熱塑性管道系統.橡膠密封環連接件密封性的檢驗方法
| Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints; German version EN 1277:2003
|
| DIN EN 1279-4-2002
| 建筑物用玻璃.絕緣玻璃組件.第4部分:邊緣密封件的物理屬性的試驗方法; 德文版本 EN 1279-4:2002
| Glass in building - Insulating glass units - Part 4: Methods of test for the physical attributes of edge seals; German version EN 1279-4:2002
|
| DIN EN 12835-2001
| 密封百頁窗.透氣性試驗
| Airtight shutters - Air permeability test; German version EN 12835:2000
|
| DIN EN 12928-2000
| 總?cè)莘e17l-230升的鋼桶嵌入法蘭式密封系統
| Inserted flange type closure systems for steel drums with a total capacity of 17 l to 230 l; German version EN 12928:2000
|
| DIN EN 13022-1-2006
| 建筑玻璃.建筑密封玻璃.第1部分:支撐和無支撐單層和多層玻璃的建筑密封玻璃系統的玻璃產品
| Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing; English version of DIN EN 13022-1:2006-08
|
| DIN EN 13022-2-2006
| 建筑玻璃.建筑密封玻璃.第2部分:安裝規范
| Glass in building - Structural sealant glazing - Part 2: Assembly rules; English version of DIN EN 13022-2:2006-08
|
| DIN EN 13090-2001
| 建筑物燃氣管道螺紋接頭再密封方法
| Means for resealing threaded joints of gas pipework in buildings; German version EN 13090:2000
|
| DIN EN 1330-8-1998
| 無損檢驗.專術語.第8部分:密封試驗的術語.三種語言版本
| Non-destructive testing - Terminology - Part 8: Terms used in leak tightness testing; Trilingual version EN 1330-8:1998
|
| DIN EN 1366-4-2006
| 服務設施的防火試驗.第4部分:線性接縫密封
| Fire resistance tests for service installations - Part 4: Linear joint seals English version of DIN EN 1366-4:2006-08
|
| DIN EN 13880-1-2003
| 熱用密封膠.第1部分:25鳦時密度測定的試驗方法
| Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C; German version EN 13880-1:2003
|
| DIN EN 13880-10-2003
| 熱用密封膠.第10部分:連續伸展和壓縮后測定粘結性的試驗方法
| Hot applied joint sealants - Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression; German version EN 13880-10:2003
|
| DIN EN 13880-11-2003
| 熱用密封膠.第11部分:功能試驗中瀝青試驗塊制備以及與瀝青路面兼容性測定的試驗方法
| Hot applied joint sealants - Part 11: Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements; German version EN 13880-11:2003
|
| DIN EN 13880-12-2003
| 熱用密封膠.第12部分:粘結試驗中混凝土試驗塊制造的試驗方法(配方法)
| Hot applied joint sealants - Part 12: Test method for the manufacture of concrete test blocks for bond testing (recipe methods); German version EN 13880-12:2003
|
| DIN EN 13880-13-2003
| 熱用密封膠.第13部分:不連續伸展性測定的試驗方法(粘性試驗)
| Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test); German version EN 13880-13:2003
|
| DIN EN 13880-2-2003
| 熱用密封膠.第2部分:25鳦時針入度測定的試驗方法
| Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25 °C; German version EN 13880-2:2003
|
| DIN EN 13880-3-2003
| 熱用密封膠.第3部分:滲透性和回復性(回彈性)測定的試驗方法
| Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience); German version EN 13880-3:2003
|
| DIN EN 13880-4-2003
| 熱用密封膠.第4部分:耐熱性測定的試驗方法.滲透值的變化
| Hot applied joint sealants - Part 4: Test method for the determination of heat resistance; Change in penetration value; German version EN 13880-4:2003
|
| DIN EN 13880-5-2004
| 熱用密封膠.第5部分:抗流動性測定的試驗方法
| Hot applied joint sealants - Part 5: Test method for the determination of flow resistance; German version EN 13880-5:2004
|
| DIN EN 13880-6-2004
| 熱用密封膠.第6部分:試驗用樣品制備的試驗方法
| Hot applied joint sealants - Part 6: Test method for the preparation of samples for testing; German version EN 13880-6:2003
|
| DIN EN 13880-7-2003
| 熱用密封膠.第7部分:密封膠的功能試驗
| Hot applied joint sealants - Part 7: Function testing of joint sealants; German version EN 13880-7:2003
|
| DIN EN 13880-8-2003
| 熱用密封膠.第8部分:浸入燃料后耐燃料密封膠重量變化測定的試驗方法
| Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion; German version EN 13880-8:2003
|
| DIN EN 13880-9-2003
| 熱用密封膠.第5部分:與瀝青路面兼容性測定的試驗方法
| Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements; German version EN 13880-9:2003
|
| DIN EN 14187-1-2003
| 冷用密封膠.第1部分:固化速率測定的試驗方法
| Cold applied joint sealants - Part 1: Test method for the determination of rate of cure; German version EN 14187-1:2003
|
| DIN EN 14187-2-2003
| 冷用密封膠.第2部分:不粘時間測定的試驗方法
| Cold applied joint sealants - Part 2: Test method for the determination of tack free time; German version EN 14187-2:2003
|
| DIN EN 14187-3-2003
| 冷用密封膠.第3部分:自動找平特性測定的試驗方法
| Cold applied joint sealants - Part 3: Test method for the determination of self-levelling properties; German version EN 14187-3:2003
|
| DIN EN 14187-4-2003
| 冷用密封膠.第4部分:浸入試驗燃料后質量和體積變化測定的試驗方法
| Cold applied joint sealants - Part 4: Test methods for the determination of the change in mass and volume after immersion in test fuel; German version EN 14187-4:2003
|
| DIN EN 14187-5-2003
| 冷用密封膠.第5部分:測定耐水解作用的試驗方法
| Cold applied joint sealants - Part 5: Test method for the determination of the resistance to hydrolysis; German version EN 14187-5:2003
|
| DIN EN 14187-6-2003
| 冷用密封膠.第6部分:浸入化學液體后粘合力/粘合特性測定的試驗方法
| Cold applied joint sealants - Part 6: Test method for the determination of the adhesion/cohesion properties after immersion in chemical liquids; German version EN 14187-6:2003
|
| DIN EN 14187-7-2003
| 冷用密封膠.第7部分:耐火性測定的試驗方法
| Cold applied joint sealants - Part 7: Test method for the determination of the resistance to flame; German version EN 14187-7:2003
|
| DIN EN 14187-8-2003
| 冷用密封膠.第8部分:用紫外線輻射法進行人工氣候老化測定的試驗方法
| Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation; German version EN 14187-8:2003
|
| DIN EN 14187-9-2006
| 冷用接縫密封膠.試驗方法.第9部分:接縫密封膠的功能試驗
| Cold applied joint sealants - Test methods - Part 9: Function testing of joint sealants English version of DIN EN 14187-9:2006-05
|
| DIN EN 14188-1-2004
| 接縫填充物和密封膠.第1部分:熱用密封膠的規范
| Joint fillers and sealants - Part 1: Specifications for hot applied sealants; German version EN 14188-1:2004
|
| DIN EN 14188-2-2005
| 接縫填充物和密封膠.第2部分:冷用密封膠的規范
| Joint fillers and sealants - Part 2: Specifications for cold applied sealants; German version EN 14188-2:2004
|
| DIN EN 14188-3-2006
| 接縫填充物和密封膠.第3部分:成形接縫密封件規范
| Joint fillers and sealants - Part 3: Specifications for preformed joint seals English version of DIN EN 14188-3:2006-04
|
| DIN EN 14241-1-2005
| 煙囪.彈性密封件和彈性密封劑.材料要求和試驗方法.第1部分:煙道內襯密封
| Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners; German version EN 14241-1:2005
|
| DIN EN 1448-1997
| 塑料管道系統.玻璃纖維增強熱固塑料(GFK)管.抗拉套管和頂尖與彈性體密封件連接的結構類型檢驗方法
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of rigid locked socket- and -spigot joints with elastomeric seals; German version EN 1448:1996
|
| DIN EN 14582-2007
| 廢棄物的特性.鹵素含量和硫含量.密封設備中氧的燃燒和測定方法
| Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods; German version EN 14582:2007
|
| DIN EN 14741-2006
| 熱塑管和管道系統.地下非壓力設施用接頭.通過評估密封壓力測定彈性密封件接頭的長期密封性能的試驗方法
| Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure English version of DIN EN 14741:2006-05
|
| DIN EN 14840-2005
| 接縫填充劑和密封膠.預制接縫密封件的試驗方法；德文版本 EN 14840-2005
| Joint fillers and sealants - Test methods for preformed joint seals; German version EN 14840:2005
|
| DIN EN 14989-1-2007
| 煙囪.密封房間加熱用金屬煙囪和獨立材料暖風供氣管的要求和試驗方法.第1部分:C6型設施用垂直送空氣/燃氣風
| Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 1: Vertical air/flue terminals for C6-type appliances; German version EN 14989-1:2007
|
| DIN EN 1514-1-1997
| 法蘭盤及其連接件.有PN標識的法蘭盤用密封件尺寸.第1部分:帶或不帶襯墊的非金屬材料制扁平密封件
| Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts; German version EN 1514-1:1997
|
| DIN EN 1514-3-1997
| 法蘭盤及其連接件.有PN標識的法蘭盤用密封件尺寸.第3部分:有PTFE外罩的非金屬軟質密封件
| Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 3: Non-metallic PTFE envelope gaskets; German version EN 1514-3:1997
|
| DIN EN 1514-4-1997
| 法蘭盤及其連接件.有PN標識的法蘭盤用密封件尺寸.第4部分:鋼法蘭用帶波紋的平面或開槽外廓金屬密封件
| Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 4: Corrugated flat or grooved metallic and filled metallic gaskets for use with steel flanges; German version EN 1514-4:1997
|
| DIN EN 1514-8-2005
| 法蘭及其連接件.PN標示法蘭用墊圈的尺寸.第8部分:帶槽法蘭用聚酯O形密封圈
| Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 8: Polymeric O-Ring gaskets for grooved flanges; German version EN 1514-8:2004
|
| DIN EN 15208-2007
| 危險物品的運輸罐.密封包裝運輸系統.工作原理和接口規范
| Tanks for transport of dangerous goods - Sealed parcel delivery systems - Working principles and interface specifications; German version EN 15208:2007
|
| DIN EN 15287-1-2007
| 煙囪.煙囪的設計、安裝和試用.第1部分:非密封房間加熱器具用煙囪
| Chimneys - Design, installation and commissioning of chimneys - Part 1: Chimneys for non-roomsealed heating appliances; German version EN 15287-1:2007
|
| DIN EN 15434-2006
| 建筑玻璃.建筑和/或抗紫外線密封材料的產品標準（用于暴露密封的建筑密封打光和/或絕緣玻璃單元）
| Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) English version of DIN EN 15434:2006-08
|
| DIN EN 1591-1 Bb.1-2001
| 法蘭及其接頭.密封圈法蘭接頭設計規則.背景信息
| Flanges and their joints - Design rules for gasketed circular flange connections - Background information
|
| DIN EN 1680-1997
| 塑料管道系統.聚乙烯(PE)管道系統用閥門.操作機構彎曲時和彎曲后密封性試驗方法
| Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism; German version EN 1680:1997
|
| DIN EN 210-2000
| 鋼筒.最小總?cè)萘繛?16.5升的非拆卸式蓋蓋(密封式)筒; 德文版本 EN 210:1999
| Steel drums - Non-removable head (tight head) drums with a minimum total capacity of 216,5 l; German version EN 210:1999
|
| DIN EN 2591-322-1998
| 航空航天系列.電氣和光學儀器連接元件.試驗方法.第322部分:密封性試驗
| Aerospace series - Elements of electrical and optical connection; test methods - Part 322: Hermeticity; German version EN 2591-322:1998
|
| DIN EN 2591-324-1998
| 航空航天系列.電氣和光學儀器連接元件.試驗方法.第324部分:界面密封試驗
| Aerospace series - Elements of electrical and optical connection; test methods - Part 324: Interfacial sealing; German version EN 2591-315:1998
|
| DIN EN 2591-407-1999
| 航空航天系列.電器和光學儀器連接元件.試驗方法.第407部分:觸點固定系統和密封的耐久性
| Aerospace series - Elements of electrical and optical connection; test methods - Part 407: Durability of contact retention system and seals; German version EN 2591-407:1999
|
| DIN EN 2591-512-2003
| 航空航天系列.光電連接元件.試驗方法.第512部分:密封連接器外殼固定接頭有效性
| Aerospace series - Elements of electrical and optical connection; Test methods - Part 512: Effectiveness of non-removable fixing of hermetically sealed connector shell; German and English version EN 2591-512:2002
|
| DIN EN 2591-6323-2002
| 航空航天系列.電氣和光學連接元件.試驗方法.第6323部分:光學元件.熱沖擊(密封裝置); 德文版本 EN 2591-6323
| Aerospace series - Elements of electrical and optical connection; Test methods - Part 6323: Optical elements; Thermal shock (hermetically sealed devices); German version EN 2591-6323:2002
|
| DIN EN 2591-6324-2003
| 航空航天系列.光電連接件.試驗方法.第6324部分:光學元件.層間密封
| Aerospace series - Elements of electrical and optical connection; Test methods - Part 6324: Optical elements; Interfacial sealing; German and English version EN 2591-6324:2001
|
| DIN EN 2607-2007
| 航空航天系列.用鎖住方式連接適配器用O型密封圈.測量
| Aerospace series - O-rings for adaptors, threaded, with lockring - Survey; German and English version EN 2607:2005
|
| DIN EN 26927-1991
| 建筑結構.連接產品.密封劑.詞匯
| Building construction; jointing products; sealants; vocabulary (ISO 6927:1981); german version EN 26927:1990
|
| DIN EN 28394-1991
| 建筑結構.連接產品.單組分密封劑可擠壓性的測定(ISO 8394:1988)
| Building construction; jointing products; determination of extrudability of one-component sealants (ISO 8394:1988); german version EN 28394:1990
|
| DIN EN 2881-2007
| 航空和航天系列.米制系列MOS2潤滑的鈍化耐腐蝕、耐燃鋼沉頭雙耳密封鎖緊浮動地腳螺母.等級:900MPa/120℃
| Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS<(Index)2> lubricated, metric series - Classification: 900 MPa (at ambient temperature)/120 °C; German and English version EN 2881:2006
|
| DIN EN 29048-1991
| 建筑結構.連接產品.用標準化的儀器測定密封劑的可擠壓性(ISO 9048:1987)
| Building construction; jointing products; determination of extrudability of sealants using standardized apparatus (ISO 9048:1987); german version EN 29048:1990
|
| DIN EN 29885-1994
| 廣口玻璃儀器.瓶口密封面不平度偏差.試驗方法
| Wide-mouth glass containers; deviation from flatness of top sealing surface; test methods (ISO 9885:1991); German version EN 29885:1994
|
| DIN EN 2997-5-1997
| 航空航天.工作溫度常數為175℃、200℃極值為260℃耐火或不耐火螺紋連接圓形電氣插接件.第5部分:帶正方安裝
| Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 5: Hermetic, square flange receptacle; product standard; German version EN 2997-5:1997
|
| DIN EN 2997-6-1997
| 航空航天.工作溫度常數為175℃、200℃極值為260℃耐火或不耐火螺紋連接圓形電氣插接件.第6部分:帶鎖緊螺母
| Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 6: Hermetic jam-nut mounted receptacle; product standard; German version EN 2997-6:1997
|
| DIN EN 2997-7-1997
| 航空航天.工作溫度常數為175℃、200℃極值為260℃耐火或不耐火螺紋連接圓形電氣插接件.第7部分:帶圓形焊接
| Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 7: Hermetic receptacle with round flange attached by soldering or brazing; product standard; German version EN 2997-7:1997
|
| DIN EN 3081-2002
| 航空航天系列.鈦合金管連接件 8°30'.帶動態光束密封端頭的修理用焊接箍; 德文版本 EN 3081:2001
| Aerospace series - Pipe coupling 8°30 in titanium alloy - Ferrules, welded with dynamic beam seal end, for repair; German version EN 3081:2001
|
| DIN EN 3243-2002
| 航空航天系列.鈦合金8°30'管連接件.帶動態束密封端的金屬圈焊接; 德文版本 EN 3243:2001
| Aerospace series - Pipe coupling 8°30 in titanium alloy - Ferrule welded, with dynamic beam seal end; German version EN 3243:2001
|
| DIN EN 3269-2006
| 航空航天系列.8°30'鈦合金管接頭.帶動態梁密封端的單頭卡套.德文和英文版本EN 3269-2001
| Aerospace series - Pipe coupling 8°30' in titanium alloy - Ferrules, blind, with dynamic beam seal end; German and English version EN 3269:2001
|
| DIN EN 3272-2006
| 航空航天系列.8°30'管接頭.焊接箍用動態梁密封端.幾何構型.德文和英文版本EN 3272-2001
| Aerospace series - Pipe coupling 8°30' - Dynamic beam seal end for ferrule, welded - Geometric configuration; German and English version EN 3272:2001
|
| DIN EN 3273-2006
| 航空航天系列.鈦合金管連接件8°30'.彎頭、十字管和三通管用動梁密封端頭.幾何配置
| Aerospace series - Pipe coupling 8°30′ - Dynamic beam seal end for elbows, tees and crosses - Geometric configuration; German and English version EN 3273:2001
|
| DIN EN 3275-2002
| 航空航天系列.可達28000kPa 的 8°30'管連接件.動態光束密封.公制系列.技術規范; 德文和英文版本 EN 3275:2
| Aerospace series - Pipe coupling 8°30 up to 28000 kPa - Dynamic beam seal; Metric series; Technical specification; German and English version EN 3275:2002
|
| DIN EN 3373-012-2007
| 航空航天系列.電導體壓接用終端盒和內嵌連接線.第012部分:溫度＜150℃的銅導體壓接用絕緣和密封的內嵌連接
| Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 012: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 150 °C - Product standard; German and English version EN 3373-012:2005
|
| DIN EN 3545-001-2007
| 航空航天系列.工作溫度-55℃～175℃后部密封或非密封的塑料外殼連接的矩形連接器.技術規范
| Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 001: Technical specification; German and English version EN 3545-001:2005
|
| DIN EN 3545-002-2006
| 航空航天系列.工作溫度-55℃～175℃后部密封或非密封的、塑料殼體固定裝置矩形連接器.第002部分:性能和接觸
| Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 002: Specification of performance and contact arrangements; German and English version EN 3545-002:2005
|
| DIN EN 3545-003-2006
| 航空航天系列.工作溫度-55℃至175℃后部密封或非密封的、塑料殼體矩形連接器.第003部分:插孔接點的連接器.
| Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 003: Connectors with female contacts - Product standard; German and English version EN 3545-003:2005
|
| DIN EN 3545-004-2006
| 航空航天系列.工作溫度-55℃至175℃后部密封或非密封的、塑料殼體矩形連接器.第004部分:插塞接點的連接器.
| Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 004: Connectors with male contacts - Product standard; German and English version EN 3545-004:2005
|
| DIN EN 3545-005-2007
| 航空航天系列.工作溫度為-55℃～175℃塑料殼體鎖緊裝置后部密封或非密封的矩形電連接器.第005部分:不固定外
| Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 005: Female coding and attachment System for mounting on free housing (plug) - Product standard; German and English version EN 3545-005:2006
|
| DIN EN 3545-006-2007
| 航空航天系列.工作溫度為-55℃～175℃塑料殼體鎖緊裝置后部密封或非密封的矩形電連接器.第006部分:固定外殼
| Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 006: Male coding and attachment System for mounting on fixed housing (receptacle) - Product standard; German and English version EN 3545-006:2006
|
| DIN EN 3545-007-2006
| 航空航天系列.工作溫度-55℃至175℃后部密封或非密封的、塑料殼體矩形連接器.第007部分:電纜夾.產品標準
| Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 007: Cable clamp - Product standard; German and English version EN 3545-007:2005
|
| DIN EN 3561-2004
| 航空航天系列.鈦合金管連接件8°30'.在管端焊接和軋制的帶動梁密封端頭的箍
| Aerospace series - Pipe coupling 8°30 in titanium alloy - Ferrules with dynamic beam seal end, welded and reduced at pipe end; German and English version EN 3561:2001 + AC:2003
|
| DIN EN 3646-005-2007
| 航空航天系列.持續工作溫度為175℃或200℃的圓形卡口式聯結電連接器.第005部分:方形法蘭安裝密封插座.產品
| Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 005: Receptacle, hermetic, square flange mounting - Product standard; German and English version EN 3646-005:2006
|
| DIN EN 3646-006-2007
| 航空航天系列.持續工作溫度為175℃或200℃的圓形卡口式聯結電連接器.第006部分:鎖緊螺母安裝密封插座.產品
| Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 006: Receptacle, hermetic, jam-nut mounting - Product standard; German and English version EN 3646-006:2006
|
| DIN EN 3646-007-2007
| 航空航天系列.持續工作溫度為175℃或200℃的圓形卡口式聯結電連接器.第007部分:圓形法蘭焊接或銅焊接安裝密
| Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 007: Receptacle, hermetic, round flange, welding or brazing mounting - Product standard; German and English version EN 3646-007:2006
|
| DIN EN 3660-004-2007
| 航空航天系列.圓形和矩形光電連接器用電纜引出端附件.第004部分:EN2997和EN4067帶應變消除夾的非密封直形A
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 004: cable outlet, style A, straight, unsealed with clamp strain relief for EN 2997 and EN 4067 - Product standard; German and English version EN 3660-004:2006
|
| DIN EN 3660-005-2007
| 航空航天系列.圓形和矩形光電連接器用電纜引出端附件.第005部分:EN2997和EN4967中帶應變消除夾未密封的A型9
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90° unsealed, with clamp strain relief for EN 2997 and EN 4967 - Product standard; German and English version EN 3660-005:2006
|
| DIN EN 3708-003-2007
| 航空航天系列.模塊化互連系統.終端連接系統.第003部分:密封移動式反饋模塊版本.產品標準
| Aerospace series - Modular interconnection systems - Terminal junction systems - Part 003: Removable feedback modules version, sealed - Product standard; German and English version EN 3708-003:2006
|
| DIN EN 3708-004-2007
| 航空航天系列.模塊化互連系統.終端連接系統.第004部分:非密封移動式反饋模塊版本.產品標準
| Aerospace series - Modular interconnection systems - Terminal junction systems - Part 004: Removable feedback modules version, unsealed - Product standard; German and English version EN 3708-004:2006
|
| DIN EN 3708-005-2007
| 航空航天系列.模塊化互連系統.終端連接系統.第005部分:密封和非密封反饋模塊版本用帶附件的框架.產品標準
| Aerospace series - Modular interconnection systems - Terminal junction systems - Part 005: Frames with accessories for feedback modules version, sealed and unsealed - Product standard; German and English version EN 3708-005:2006
|
| DIN EN 3746-2006
| 航空航天系列.氟硅酮橡膠(FVMQ)O型密封圈.硬度為80IRHD
| Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Hardness 80 IRHD; German and English version EN 3746:2003
|
| DIN EN 3747-2005
| 航空航天系列.氟硅酮橡膠(FVMQ)O型密封圈.技術規范
| Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification; German and English version EN 3747:2003
|
| DIN EN 3748-2002
| 航空航天系列.O形密封圈凹槽.尺寸; 德文和英文版本 EN 3748:2001
| Aerospace series - O-ring grooves - Dimensions; German and English version EN 3748:2001
|
| DIN EN 3867-2007
| 航空航天系列.管連接件、活動法蘭和密封件.TI-P64001型鈦合金法蘭
| Aerospace series - Pipe couplings, loose flanges and seals - Flanges in titanium alloy TI-P64001; German and English version EN 3867:2004
|
| DIN EN 3868-2007
| 航空航天系列.管連接件、活動法蘭和密封件.TI-P64001型鈦合金焊接法蘭聯接件
| Aerospace series - Pipe couplings, loose flanges and seals - Flange connectors, welded, in titanium alloy TI-P64001; German and English version EN 3868:2004
|
| DIN EN 3869-2007
| 航空和航天系列.管道聯接件、活動法蘭和密封件.鋁合金碳氟橡膠和電樞密封件
| Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy; German and English version EN 3869:2004
|
| DIN EN 4054-2006
| 航空航天系列.管連接件、活動法蘭和密封件.氟烴橡膠密封件和鋁合金附件.技術規范
| Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy - Technical specification; German and English version EN 4054:2004
|
| DIN EN 415-3-2000
| 包裝機械的安全性.第3部分:成型,裝填和密封機
| Safety of packaging machines - Part 3: Form, fill and seal machines; German version EN 415-3:1999
|
| DIN EN 4529-001-2007
| 航空航天系列.電氣和光學連接元件.密封插頭.第001部分:技術規范
| Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 001: Technical specification; German and English version EN 4529-001:2006
|
| DIN EN 4529-002-2007
| 航空航天系列.電氣和光學連接元件.密封插頭.第002部分:產品標準的索引
| Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 002: Index of product standards; German and English version EN 4529-002:2006
|
| DIN EN 4529-003-2007
| 航空航天系列.電氣和光學連接元件.密封插頭.第003部分:T級.產品標準
| Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 003: Class T - Product standard; German and English version EN 4529-003:2006
|
| DIN EN 455-1-2001
| 一次性醫用手套.第1部分:密封性要求和檢驗
| Medical gloves for single use - Part 1: Requirements and testing for freedom from holes; German version EN 455-1:2000
|
| DIN EN 4550-4-2004
| 航空航天系列.管道連接件37設計構造.英制.第4部分:承口密封端
| Aerospace series - Pipe coupling 37° - Design configuration - Inch series - Part 4: Female sealing ends; German and English version EN 4550-4:2003
|
| DIN EN 50216-3-2007
| 電力變壓器和電抗器配件.第3部分:密封液浸式變壓器和無氣墊電抗器用保護繼電器
| Power transformer and reactor fittings - Part 3: Protective relay for hermetically sealed liquid-immersed transformers and reactors without gaseous cushion; German version EN 50216-3:2002 + A2:2006
|
| DIN EN 50262-2005
| 電氣裝置用電纜密封套
| Cable glands for electrical installations; German version EN 50262:1998 + A1:2001 + A2:2004
|
| DIN EN 50411-2-2-2007
| 光纖通信系統用纖維形成體和閉路.產品規范.第2-2部分:S&A類用1型密封平蓋纖維接縫閉路
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-2: Sealed pan fibre splice closures Type 1, for category S & A; German version EN 50411-2-2:2007
|
| DIN EN 50411-2-4-2006
| 用于光纖傳遞系統的纖維形成體和閉路.產品規范.第2-4部分:S&A類密封圓蓋纖維接縫閉路類型1
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-4: Sealed dome fibre splice closures Type 1, for category S & A; German version EN 50411-2-4:2006
|
| DIN EN 549-1995
| 燃氣灶具和燃氣器具用密封件和膜片的橡膠材料; 德文版本 EN 549:1994
| Rubber materials for seals and diaphragms for gas appliances and gas equipmemt; German version EN 549:1994
|
| DIN EN 60068-2-17-1995
| 環境試驗.第2部分:試驗.試驗Q:密封
| Environmental testing - Part 2: Tests - Test Q: Sealing (IEC 60068-2-17:1994); German version EN 60068-2-17:1994
|
| DIN EN 60191-6-8-2002
| 半導體器件的機械標準化.第6-8部分:表面安裝的半導體器件包外形圖紙制備的一般規則.玻璃密封陶瓷方形扁平封
| Mechanical standardization of semiconductor devices - Part 6-8: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Design guide for glass sealed ceramic quad flatpack (G-QFP) (IEC 60191-6-8:2001); German version EN 60191-6-8:2001
|
| DIN EN 60512-12-6-1996
| 電子設備用機電元件.基本試驗規程和測量方法.第12部分:可釬焊性試驗.第6節:試驗12f:機械釬焊中耐溶劑和清洗
| Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering (IEC 60512-12-6:1996); German version EN 60512-12-6:1996
|
| DIN EN 60512-14-2-2006
| 電子設備用連接器.試驗和測量.第14-2部分:密封試驗.試驗14b:密封.細微的漏氣(IEC 60512-14-2:2006)
| Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage (IEC 60512-14-2:2006); German version EN 60512-14-2:2006
|
| DIN EN 60512-14-4-2006
| 電子設備用連接器.試驗和測量.第14-4部分:密封試驗.試驗14d:浸入.防水(IEC 60512-14-4:2006)
| Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof (IEC 60512-14-4:2006); German version EN 60512-14-4:2006
|
| DIN EN 60512-14-5-2006
| 電子設備連接器.試驗和測量.第14-5部分:密封試驗.試驗14e:低氣壓下浸漬(IEC 60512-14-5:2006)
| Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure (IEC 60512-14-5:2006); German version EN 60512-14-5:2006
|
| DIN EN 60512-14-6-2006
| 電子設備用連接器.試驗和測量.第14-6部分:密封試驗.試驗14f:界面密封(IEC 60512-14-6:2006)
| Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing (IEC 60512-14-6:2006); German version EN 60512-14-6:2006
|
| DIN EN 60512-14-7-1998
| 電子設備的機電元件.基本試驗規程和測量方法.第14部分:密封試驗.第7節:14g試驗:噴射沖擊水
| Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests; Section 7: Test 14g: Impacting water (IEC 60512-14-7:1997); German version EN 60512-14-17:1998
|
| DIN EN 60730-2-4-2003
| 家用和類似用途自動電控制器.第2-4部分:密封和半密封的電動壓縮機用防熱電動保護器特殊要求
| Automatic electrical controls for household and similar use - Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type (IEC 60730-2-4:1990, modified + A1:1994 + A2:2001, modified); German version EN 60730-2-4:1993 + A1:1998 + A2:2002
|
| DIN EN 60749-8-2003
| 半導體器件.機械和氣候試驗方法.第8部分:密封
| Semiconductor devices - Mechanical and climatic test methods - Part 8: Sealing (IEC 60749-8:2002 + Corr. 1:2003 + Corr. 2:2003); German version EN 60749-8:2003
|
| DIN EN 61076-7-100-2007
| 電子設備連接器.產品要求.第7-100部分:電纜端口附件.由高負載矩形或圓形連接器罩和密封系統集成部件組成的
| Connectors for electronic equipment - Product requirements - Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system (IEC 61076-7-100:2006); German version EN 61076-7-100:2006
|
| DIN EN 61150-1995
| 堿性二次電池和電池組.密封鎳鎘扣式可充電整體電池組
| Alkaline secondary cells and batteries - Sealed nickel-cadmium rechargeable monobloc batteries in button cell design (IEC 61150:1992 + Corrigendum 1992); German version EN 61150:1993
|
| DIN EN 61300-2-23-1998
| 光纖互聯裝置和無源部件.基本試驗和測量程序.第2-23部分:試驗:光纖器件非加壓封閉的密封性 (IEC 61300-2-23
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests: Sealing for non-pressurized closures of fibre optic devices (IEC 61300-2-23:1995); German version EN 61300-2-23:1997
|
| DIN EN 61300-2-25-1998
| 光纖互聯裝置和無源部件.基本試驗和測量程序.第2-25部分:試驗:封閉密封的耐久性 (IEC 61300-2-25:1995); 德
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-25: Tests: Sealing endurance for closures (IEC 61300-2-25:1995); German version EN 61300-2-25:1997
|
| DIN EN 61300-2-38-2007
| 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-38部分:試驗.加壓纖維光學接線盒的密封
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for pressurized fibre optic closures (IEC 61300-2-38:2006); German version EN 61300-2-38:2006
|
| DIN EN 61857-22-2003
| 電氣絕緣系統.線.第22部分:密封圈模型特殊要求..線繞電氣絕緣系統(EIS)
| Electrical insulation systems - Procedures for thermal evaluation - Part 22: Specific requirements for encapsulated-coil model; Wire-wound electrical insulation system (EIS) (IEC 61857-22:2002); German version EN 61857-22:2002
|
| DIN EN 61951-2-2004
| 含堿性或其他非酸性電解質的蓄電池和蓄電池組.便攜密封可再充電單電池.第2部分:鎳金屬氫化物
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 2: Nickel-metal hydride (IEC 61951-2:2003); German version EN 61951-2:2003
|
| DIN EN 61959-2004
| 含有堿性或其他非酸性電解質的蓄電池和蓄電池組.密封便攜式蓄電池和蓄電池組的機械試驗
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries (IEC 61959:2004); German version EN 61959:2004
|
| DIN EN 62133-2003
| 含堿性或其它非酸性電解液的蓄電池和蓄電池組.便攜式密封蓄電池和蓄電池組的安全要求
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications (IEC 62133:2002); German version EN 62133:2003
|
| DIN EN 62339-1-2007
| 表面安裝流體分配部件用模塊元部件接口.第1部分:彈性密封件
| Modular component interfaces for surface-mount fluid distribution components - Part 1: Elastomeric seals (IEC 62339-1:2006); German version EN 62339-1:2007
|
| DIN EN 624-2001
| 液化石油汽器具專用規范.車船艙室密封液化石油汽加熱設備
| Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats; German version EN 624:2000
|
| DIN EN 681-1-2006
| 彈性密封件.給排水管道連接密封件材料要求.第1部分:硫化橡膠(包括修改件A1-1998 + A2-2002 + A3-2005和技術
| Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber(includes Amendments A1:1998 + A2:2002 + A3:2005 and Corrigendum AC:2002); English version of DIN EN 681-1:2006-11
|
| DIN EN 681-2-2006
| 彈性體密封件.給排水用管道連接密封件的材料要求.第2部分:熱塑性彈體(包括修改件A1-2002 + A2-2005)
| Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers (includes Amendments A1:2002 + A2:2005); English version of DIN EN 681-2:2006-11
|
| DIN EN 681-3-2006
| 彈性體密封件.給排水用管道連接密封件的材料要求.第3部分:硫化多孔橡膠材料(包括修改件A1-2002 + A2-2005)
| Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber (includes Amendments A1:2002 + A2:2005); English version of DIN EN 681-3:2006-11
|
| DIN EN 681-4-2006
| 彈性體密封件.給排水用管道連接密封件的材料要求.第4部分:聚氨酯鑄塑密封件(包括修改件A1-2002 + A2-2005)
| Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements (includes Amendments A1:2002 + A2:2005); English version of DIN EN 681-4:2006-11
|
| DIN EN 682-2006
| 彈性體密封件.輸送氣體和烴類液體的管道和配件用密封件的材料要求
| Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids (includes Amendment A1:2005); English version of DIN EN 682:2006-10
|
| DIN EN 713-1994
| 塑料管道系統.管接頭和聚烯烴壓力管間的機械連接.在內壓和彎曲下密封性的試驗方法
| Plastics piping systems; mechanical joints between fittings and polyolefin pressure pipes; test method for leaktightness under internal pressure of assemblies subjected to bending; German version EN 713:1993
|
| DIN EN 714-1994
| 熱塑管道系統.壓力管道和模壓管件之間無末端承載的橡膠密封圈連接件.無端部拉力的流體靜力內壓力下的密封性
| Thermoplastics piping systems - Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings - Test method for leaktightness under internal hydrostatic pressure whithout end thrust; German version EN 714:1994
|
| DIN EN 715-1994
| 熱塑塑料管道系統.小直徑壓力管和管接頭之間承載端部的連接.在水內壓力下（包括端頭推力）密封試驗方法
| Thermoplastics piping systems; end-load bearing joints between small diameter pressure pipes and fittings; test method for leaktightness under internal water pressure, including end thrust; German version EN 715:1994
|
| DIN EN 751-1-1997
| 接觸第1,第2及第3族氣體以及熱水的金屬螺紋連接密封材料.第1部分:厭氧密封材料
| Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds; German version EN 751-1:1996
|
| DIN EN 751-2-1997
| 與第1,第2及第3族氣體及熱水接觸的金屬螺紋連接部位用的密封材料.第2部分:非時效硬化連接化合物
| Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds; German version EN 751-2:1996
|
| DIN EN 751-3-1997
| 與第1,第2及第3族氣體及熱水接觸的金屬螺紋連接部位用的密封材料.第3部分:非燒結的PTFE密封帶
| Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes; German version EN 751-3:1996
|
| DIN EN 803-1994
| 塑料管道系統.壓力管道用橡膠密封圈連接件的熱塑噴鑄管件.無端部拉力的抗瞬時內壓的試驗方法; 德文版本 EN
| Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust; German version EN 803:1994
|
| DIN EN 868-10-2000
| 要進行消毒的醫療器械系統和包裝材料.第9部分:用于生產可熱密封的袋、卷軸和蓋子的聚烯烴涂膠非織物材料.要
| Packaging materials and systems for medical devices which are to be sterilized - Part 10: Adhesive coated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids; requirements and test methods; German version EN 868-10:2000
|
| DIN EN 868-7-1999
| 計劃進行消毒醫療裝置的包裝材料和包裝系統.第7部分:用環氧乙烷或射線方法進行消毒時使用的可熱密封的醫藥
| Packaging materials and systems for medical devices which are to be sterilized - Part 7: Adhesive coated paper for the manufacture of heat sealable packs for medical use for sterilization by ethylene oxide or irradiation; requirements and test methods; German version EN 868-7:1999
|
| DIN EN 868-9-2000
| 要消毒的醫療裝置系統和包裝材料.第9部分:用于生產可熱密封的袋,卷軸和蓋子的聚烯烴未涂覆非織物材料.要求
| Packaging materials and systems for medical devices which are to be sterilized - Part 9: Uncoated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids; requirements and tests methods; German version EN 868-9:2000
|
| DIN EN 911-1995
| 塑料管道系統.熱塑塑料壓力管道用的彈性密封環型接頭和機械接頭的連接.外部靜力液壓條件下的防漏試驗方法;
| Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure; German version EN 911:1995
|
| DIN EN 917-1997
| 塑料管道系統.熱塑閥門.耐內壓和密封性試驗方法
| Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness; German version EN 917:1997
|
| DIN EN 993-13-1995
| 密封成形耐火產品試驗方法.第13部分:試驗室用測溫錐基準角規范
| Methods of test for dense shaped refractory products - Part 13: Specification for pyrometric reference cones for laboratory use; German version EN 993-13:1995
|
| DIN EN 993-18-2002
| 密封成形耐火制品試驗方法.第18部分:用真空濕法測定顆粒物體積密度
| Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002
|
| DIN EN ISO 10563-2005
| 房屋建筑.密封膠.質量和體積變化的測定
| Building construction - Sealants - Determination of change in mass and volume (ISO 10563:2005); German version EN ISO 10563:2005
|
| DIN EN ISO 10590-2005
| 房屋建筑.密封膠.浸水后在保持延伸狀態下測定密封膠的拉伸性能
| Building construction - Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water (ISO 10590:2005); German version EN ISO 10590:2005
|
| DIN EN ISO 10591-2005
| 房屋建筑.密封膠.浸水后密封膠的粘結/粘合性能測定
| Building construction - Sealants - Determination of adhesion/cohesion properties of sealants after immersion in water (ISO 10591:2005); German version EN ISO 10591:2005
|
| DIN EN ISO 11431-2003
| 房屋建筑.連接件.密封膠受熱、遇水和透過玻璃的人造光照射后粘合力測定
| Building construction - Jointing products - Determination of adhesion/cohesion properties of saelants after exposure to heat, water and artificial light through glass (ISO 11431:2002); German version EN ISO 11431:2002
|
| DIN EN ISO 11432-2005
| 房屋建筑.密封膠.耐壓性測定
| Building construction - Sealants - Determination of resistance to compression (ISO 11432:2005); German version EN ISO 11432:2005
|
| DIN EN ISO 11546-1-1996
| 聲學.密封罩隔聲性能測定.第1部分:實驗室測量(申報用)
| Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995); German version EN ISO 11546-1:1995
|
| DIN EN ISO 11546-2-1996
| 聲學.密封罩隔聲性能測定.第2部分:驗收和驗證現場測量
| Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995); German version EN ISO 11546-2:1995
|
| DIN EN ISO 11600-2004
| 房屋建筑.連接件.密封件的分類和要求
| Building construction - Jointing products - Classification and requirements for sealants (ISO 11600:2002); German version EN ISO 11600:2003
|
| DIN EN ISO 11607-2-2006
| 最后滅菌的醫療器械的包裝.第2部分:組成、密封和裝配過程的確認和要求(ISO 11607-2:2006)
| Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2006) English version of DIN EN ISO 11607-2:2006-07
|
| DIN EN ISO 13783-1998
| 塑料管體系.未增塑聚氯乙烯(PVC-U)端部承載雙套管連接件.在經受彎曲和內壓力時檢測密封性和機械強度的試驗
| Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure (ISO 13783:1997); German version EN ISO 13783:1997
|
| DIN EN ISO 13844-2000
| 塑料管道系統.用于硬聚氯乙烯(PVC-U)管道的彈性密封圈式承口連接件.負壓下密封試驗方法
| Plastics piping systems - Elastomeric sealing ring type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure (ISO 13844:2000); German version EN ISO 13844:2000
|
| DIN EN ISO 13845-2000
| 塑料管道系統.用于硬聚氯乙烯(PVC-U)管道的彈性密封圈式承口連接件.內壓下角度偏轉密封試驗方法
| Plastics pipes systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2000); German version EN ISO 13845:2000
|
| DIN EN ISO 13846-2001
| 塑料管道系統.熱塑承壓管用端部荷載軸承和無端部荷載軸承組件和連接件.測定水內壓長期密封性的試驗方法
| Plastic piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure (ISO 13846:2000); German version EN ISO 13846:2000
|
| DIN EN ISO 14593-2005
| 水質.水介質中有機化合物最大需氧生物降解能力的評價.密封容器中無機碳分析法(CO2頂空試驗)
| Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Method by analysis of inorganic carbon in sealed vessels (CO<(Index)2> headspace test) (ISO 14593:1999); German version EN ISO 14593:2005
|
| DIN EN ISO 21049-2005
| 泵.離心和旋轉泵用軸密封系統
| Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004); English version EN ISO 21049:2004
|
| DIN EN ISO 228-1 Bb.1-2003
| 非螺紋密封連接的管螺紋.第1部分:尺寸、公差和命名.尺寸限值
| Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation; Limits of size
|
| DIN EN ISO 228-1-2003
| 非螺紋密封連接管螺紋.第1部分:尺寸、公差和命名
| Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003
|
| DIN EN ISO 228-2-2003
| 非螺紋密封連接管螺紋.第2部分:極限量規檢定
| Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987); German version EN ISO 228-2:2003
|
| DIN EN ISO 483-2006
| 塑料.為保持恒定濕度使用水溶液進行調節和試驗用的小型密封容器(ISO 483-2005).德文版本 EN ISO 483-2005
| Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value (ISO 483:2005); German version EN ISO 483:2005
|
| DIN EN ISO 6149-1-2007
| 用于液壓傳動和一般用途的管接頭.帶ISO 261米制螺紋和O形圈密封的端口和柱頭螺栓端頭.第1部分:锪孔溝槽中裝
| Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2006); German version EN ISO 6149-1:2007
|
| DIN EN ISO 6149-2-2007
| 用于液壓傳動和一般用途的管接頭.帶ISO 261米制螺紋和O形圈密封的端口和柱頭螺栓端頭.第2部分:重型(S系列)
| Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006); German version EN ISO 6149-2:2007
|
| DIN EN ISO 6149-3-2007
| 用于液壓傳動和一般用途的管接頭.帶ISO 261米制螺紋和O形圈密封的端口和柱頭螺栓端頭.第3部分:輕型(L系列)
| Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006); German version EN ISO 6149-3:2007
|
| DIN EN ISO 7389-2004
| 房屋建筑.連接件.密封件的回彈性測定
| Building construction - Jointing products - Determination of elastic recovery of sealants (ISO 7389:2002); German version EN ISO 7389:2003
|
| DIN EN ISO 7390-2004
| 房屋建筑.連接件.密封件的耐流動性測定
| Building construction - Jointing products - Determination of resistance to flow of sealants (ISO 7390:2002); German version EN ISO 7390:2003
|
| DIN EN ISO 8339-2005
| 房屋建筑.密封件.拉伸性能(拉至斷裂)的測定
| Building construction - Sealants - Determination of tensile properties (Extension to break) (ISO 8339:2005); German version EN ISO 8339:2005
|
| DIN EN ISO 8340-2005
| 房屋建筑.密封件.保持延伸狀態時拉伸性能的測定
| Building construction - Sealants - Determination of tensile properties at maintained extension (ISO 8340:2005); German version EN ISO 8340:2005
|
| DIN EN ISO 8434-4-2000
| 液壓及通用金屬管件連接.第4部分:接頭焊有O形密封圈的24度錐體連接件
| Metallic tube connections for fluid power and general use - Part 4: 24° cone connectors with O-ring weld-on nipples (ISO 8434-4:1995); German version EN ISO 8434-4:2000
|
| DIN EN ISO 9046-2005
| 房屋建筑.連接產品.恒溫下密封膠的粘附/粘合性能的測定
| Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046:2002); German version EN ISO 9046:2004
|
| DIN EN ISO 9047-2003
| 房屋建筑.連接件.變溫下密封膠粘合性能的測定
| Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures (ISO 9047:2001); German version EN ISO 9047:2003
|
| DIN EN ISO 9974-1-2000
| 一般用途和流體動力連接件.使用ISO 261螺紋的彈性密封或金屬與金屬密封的氣門和雙頭螺栓端頭.第1部分:螺紋
| Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 9974-1:1996); German version EN ISO 9974-1:2000
|
| DIN EN ISO 9974-2-2000
| 通用和液壓傳動用聯接件.用ISO261彈性螺紋或金屬與金屬密封的氣門和雙頭螺栓端頭.第2部分:(E型)帶彈性密封
| Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996); German version EN ISO 9974-2:2000
|
| DIN EN ISO 9974-3-2000
| 一般用途和流體動力連接件.使用ISO 261螺紋的彈性密封或金屬與金屬密封的氣門和雙頭螺栓端頭.第3部分:(B型)
| Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996); German version EN ISO 9974-3:2000
|
| DIN IEC 60261-1991
| 加壓波導管及其組件密封試驗
| Sealing test for pressurized waveguide; tubing and assemblies; identical with IEC 60261:1989; german version HD 138 S2:1990
|
| DIN ISO 15705-2003
| 水質.化學需氧量指數測定.小型密封管法
| Water quality - Determination of the chemical oxygen demand index (ST-COD) - Small-scale sealed tube method (ISO 15705:2002)
|
| DIN ISO 3939-1978
| 流體傳動系統和元件.多層唇形密封組件.測量疊合高度的方法
| Fluid Power Systems and Components; Multiple Lip Packing Sets, Methods for Measuring Stack Heights
|
| DIN ISO 5597-1988
| 液壓流體動力.液壓缸.往復作用的活塞和活塞桿的密封腔.尺寸和公差
| Hydraulic fluid power; cylinders; housings for piston and rod seals in reciprocating applications; dimensions and tolerances; identical with ISO 5597:1987
|
| DIN ISO 6547-1983
| 液壓流體動力.裝有軸承環的活塞密封殼體.尺寸和允公差
| Hydraulic fluid power-cylinder; piston seal housings incorporating bearing rings; dimensions and tolerances
|
| DIN ISO 6550-1-1997
| 道路車輛.錐形密封座火花塞及汽缸蓋孔.第1部分:M14×1.25火花塞
| Road vehicles - Sheat-type glow-plugs with seating and their cylinder head housing - Part 1: M14 × 1,25 glow-plugs (ISO 6550-1:1994)
|
| DIN ISO 6550-2-1997
| 道路車輛.帶圓錐形密封座和汽缸蓋孔的火花塞.第2部分:火花塞M12*1,25
| Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 2: M12 × 1,25 glow-plugs (ISO 6550-2:1994)
|
| DIN ISO 7320-1996
| 航空航天.流體系統用螺紋密封聯軸器.尺寸 (ISO 7320:1992)
| Aerospace - Couplings, threaded and sealed, for fluid systems - Dimensions (ISO 7320:1992)
|
| DIN ISO 7425-1-1990
| 液壓傳動.彈性體賦能塑料面密封溝槽.尺寸和公差.活塞密封溝槽
| Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; piston seal housings; identical with ISO 7425-1:1988
|
| DIN ISO 7425-2-1990
| 液壓傳動.彈性體賦能塑料面密封溝槽.尺寸和公差.第2部分:活塞桿密封溝槽
| Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; rod seal housings; identical with ISO 7425-2:1989
|
| DIN ISO 7632-1986
| 道路車輛.使用石油基液壓制動液的液壓盤式制動液壓缸的彈性密封墊件(最大工作溫度120℃)
| Road vehicles; elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 °C max.); identical with ISO 7632, edition 1985
|
| DIN ISO 9090-1990
| 氣焊及類似加工工藝設備的氣體密封
| Gas tightness of equipment for gas welding and allied processes; identical with ISO 9090:1989
|
| DIN ISO 9222-1-1990
| 技術制圖.動密封應用.第1部分：通用簡化畫法
| Technical drawings; seals for dynamic application; part 1: general simplified representation; identical with ISO 9222-1:1989
|
| DIN ISO 9222-2-1991
| 技術制圖.動負荷用密封件.第2部分:詳細簡明的表示法; 等同采用 ISO 9222-2:1989
| Technical drawings; seals for dynamic application; part 2: detailed simplified representation; identical with ISO 9222-2:1989
|
| DIN V 18197-2005
| 用水密封的混凝土接縫的密封
| Sealing of joints in concrete with water stops
|
| DIN V 43693-2006
| 低壓開關裝置和控制裝置.密封型平面設計活塞定位開關.結構安裝和尺寸
| Low-voltage switchgear and controlgear - Position switches with plunger, flat design, encapsulated - Functional and mounting design
|
| DIN V 65900-6-1995
| 航空航天系列.鈦合金管道聯軸節、松動式法蘭和密封件.總裝建議 (AECMA 技術報告 TR 4053:1994)
| Aerospace series - Pipe couplings, loose flanges and seals, in titanium alloy Assembly recommendations (AECMA Technical Report TR 4053:1994)
|
| DIN VDE 0472-604-1985
| 電纜、電線和絕緣導線試驗.電纜護套密封性
| Testing of cables, wires and flexible cords; tightness of cables sheaths
|
| 編號 | 中文名稱 | 英文名稱 |
|---|