| 編號 | 中文名稱 | 英文名稱 |
|---|
| BS 2000-168-2005
| 石油及其產品試驗方法.潤滑脂滾動軸承性能測定
| Methods of test for petroleum and its products - Determination of rolling bearing performance of lubricating grease
|
| BS 3134-1-1979
| 米制錐形滾子軸承.第1部分:單列軸承尺寸公差規范
| Metric tapered roller bearings - Specification for dimensions and tolerances of single row bearings
|
| BS 3134-2-1981
| 米制錐形滾柱軸承.第2部分:雙列軸承尺寸規范
| Metric tapered roller bearings - Specification for dimensions of double row bearings
|
| BS 3134-3-1981
| 米制錐形滾柱軸承.第3部分:外環凸緣尺寸規范
| Metric tapered roller bearings - Specification for dimensions of flanged cups
|
| BS 3134-4-1992
| 米制錐形滾柱軸承.第4部分:命名制度規范
| Metric tapered roller bearings - Specification for designation system
|
| BS 3332-1987
| 軸承用巴比合金錠規范
| Specification for white metal bearing alloy ingots
|
| BS 3338-10-1961
| 錫及錫合金取樣及分析方法.第10部分:錫錠、錫鉛焊料及軸承用巴比合金中鐵含量測定方法(光度測定法)
| Methods for the sampling and analysis of tin and tin alloys - Method for the determination of iron in ingot tin, tin-lead solders and white metal bearing alloys (photometric method)
|
| BS 3338-13-1965
| 錫及錫合金取樣及分析方法.第13部分:焊料及軸承用巴比合金中銻含量測定方法(溴酸鉀容量法)
| Methods for the sampling and analysis of tin and tin alloys - Method for the determination of antimony in solders and white metal bearing alloys (volumetric: potassium bromate method)
|
| BS 3338-14-1965
| 錫及錫合金的取樣及分析方法.第14部分:軸承用巴比合金錠取樣方法
| Methods for the sampling and analysis of tin and tin alloys - Method for the sampling of white metal bearing alloy ingots
|
| BS 3338-15-1965
| 錫及錫合金取樣及分析方法.第15部分:軸承用巴比合金中銅和鉛含量測定方法(電解鍍層法)
| Methods for the sampling and analysis of tin and tin alloys - Method for the determination of copper and lead in white metal bearing alloys (electrodeposition method)
|
| BS 3338-16-1965
| 錫及錫合金取樣及分析方法.第16部分:軸承用巴比合金中錫含量測定方法(鎳帶卷還原法)
| Methods for the sampling and analysis of tin and tin alloys - Method for the determination of tin in white metal bearing alloys (nickel coil reduction method)
|
| BS 3338-17-1965
| 錫及錫合金的取樣及分析方法.第17部分:焊料及軸承用巴比合金中鎘含量測定方法(光度測定法)
| Methods for the sampling and analysis of tin and tin alloys - Method for the determination of cadmium in solders and white metal bearing alloys (photometric method)
|
| BS 3338-18-1966
| 錫及錫合金取樣及分析方法.第18部分:焊料及軸承用白合金中鋁含量測定方法(光度測定法)
| Methods for the sampling and analysis of tin and tin alloys - Method for the determination of aluminium in solders and white metal bearing alloys (photometric method)
|
| BS 3338-19-1966
| 錫及錫合金的取樣及分析方法.白金屬軸承合金和釬料中鋅的測定方法(光度測定法)
| Methods for the sampling and analysis of tin and tin alloys - Method for the determination of zinc in solders and white metal bearing alloys (photometric method)
|
| BS 3338-1966
| 錫及錫合金的取樣及分析方法.第19部分:焊料及白合金軸承中鋅的測定方法(光度測定法)
| Methods for the sampling and analysis of tin and tin alloys. Method for the determination of zinc in solders and white metal bearing alloys (photometric method)
|
| BS 3338-8-1961
| 錫及錫合金取樣及分析方法.第8部分:錫錠、錫鉛焊料及軸承用巴比合金中鉍含量測定方法(光度測定法)
| Methods for the sampling and analysis of tin and tin alloys - Method for the determination of bismuth in ingot tin, tin-lead solders and white metal bearing alloys (photometric method)
|
| BS 3338-9-1965
| 錫及錫合金取樣及分析方法.第9部分:錫錠、焊料及軸承用巴比合金中砷含量測定方法(光度測定法)
| Methods for the sampling and analysis of tin and tin alloys - Method for the determination of arsenic in ingot tin, solders and white metal bearing alloys (photometric method)
|
| BS 3469-1985
| 儀器用精密滾子軸承(球軸承)規范
| Specification for instrument precision rolling bearings (ball bearings)
|
| BS 3SP 89-1983
| 飛機機體軸承特性、界面尺寸、容差及靜載荷等級規范
| Specification for characteristics, boundary dimensions, tolerances and static load ratings of airframe bearings
|
| BS 4480-1-1992
| 滑動軸承:米制系列.第1部分:燒結軸襯尺寸和公差
| Plain bearings: metric series - Sintered bushes - Dimensions and tolerances
|
| BS 4480-2-1974
| 滑動軸承規范.米制系列.第2部分:整體塑料軸套
| Specification for plain bearings: metric series - Solid plastics bushes
|
| BS 4480-3-1993
| 滑動軸承.米制系列.第3部分:銅合金套管
| Plain bearings: metric series - Copper alloy bushes
|
| BS 4480-4-1979
| 滑動軸承規范.米制系列.第4部分:卷制軸套尺寸、公差及檢驗方法
| Specification for plain bearings: metric series - Dimensions, tolerances and methods of checking wrapped bushes
|
| BS 4480-5-1979
| 滑動軸承規范.米制系列.第5部分:薄壁半軸承的尺寸、公差及檢驗方法
| Plain bearings: metric series - Dimensions, tolerances and methods of checking thin-walled half bearings
|
| BS 4480-6-1984
| 滑動軸承規范.米制系列.第6部分:帶材制環形止推墊圈尺寸公差規范
| Plain bearings: metric series - Specification for dimensions and tolerances of ring type thrust washers made from strip
|
| BS 4480-7-1984
| 滑動軸承規范.米制系列.第7部分:壓制雙金屬半止推墊圈的尺寸和公差規范
| Plain bearings: metric series - Specification for dimensions and tolerances of pressed bimetallic half thrust washers
|
| BS 4480-8-1984
| 滑動軸承規范.米制系列.第8部分:薄壁法蘭聯接半軸承的尺寸、公差及檢驗方法
| Plain bearings: metric series - Specification for dimensions, tolerances and methods of checking of thin-walled flanged half bearings
|
| BS 4480-9-1995
| 滑動軸承:第9部分:米制系列.襯套外徑測量
| Plain bearings: metric series - Checking the outside diameter of wrapped bushes
|
| BS 5512-1991
| 滾動軸承動態載荷額定值和額定壽命的計算方法
| Method of calculating dynamic load ratings and rating life of rolling bearings
|
| BS 5812-1-1979
| 滑動軸承材料.第1部分:整體軸承用鋁合金規范
| Materials for plain bearings - Specification for aluminium alloy for solid bearings
|
| BS 6010-3-1994
| 滾動軸承.第3部分:外球面加寬內圈軸承.第3部分:澆鑄和壓制軸承殼體尺寸規范
| Rolling bearings - Bearings with speherical outside surface and extended inner ring width - Specification for dimensions of cast and pressed housings
|
| BS 6107-3-1992
| 滾動軸承.公差.第3部分:徑向內部間隙規范
| Rolling bearings: tolerances - Specifications for radial internal clearance
|
| BS 6413-2-1983
| 潤滑劑、工業用油和相關產品(L級).第2部分:F系列的分類(主軸軸承、軸承和相關離合器)
| Lubricants, industrial oils and related products (class L) - Classification for family F (spindle bearings, bearings and associated clutches)
|
| BS 7568-19-1992
| 沖壓工具.導襯.B形的普通球軸承隔離環襯.1型
| Press tools - Guide bushes - Form B, ball cage bushes, plain, type 1
|
| BS 7585-1-1992
| 多層金屬滑動軸承.第1部分:粘合力無損超聲波試驗方法
| Metallic multilayer plain bearings - Method for non-destructive ultrasonic testing of bond
|
| BS 7585-2-1992
| 多層金屬滑動軸承.第2部分:厚度為2mm的軸承金屬層粘合力的破壞性試驗方法
| Metallic multilayer plain bearings - Method for destructive testing of bond for bearing metal layer thickness 2 mm
|
| BS 7585-3-1992
| 多層金屬滑動軸承.第3部分:模滲透無損試驗方法
| Metallic multilayer plain bearings - Method for non-destructive die penetrant testing
|
| BS 7637-1993
| 線性運動、循環球、套管型滾動軸承規范(公制系列)
| Specification for linear motion, recirculating ball, sleeve type rolling bearings (metric series)
|
| BS 7675-1993
| 滑動軸承.薄壁半軸承.周長檢驗
| Plain bearings - Thin-walled half bearings - Checking of peripheral length
|
| BS 7679-1993
| 普通軸承.幾何特性及材料質量特性的質量控制技術和檢驗
| Plain bearings - Quality control techniques and inspection of geometrical and material quality characteristics
|
| BS 7762-1994
| 滑動軸承.質量特性.統計過程控制(SPC)
| Plain bearings - Quality characteristics - Statistical process control (SPC)
|
| BS 7772-1994
| 滑動軸承.薄壁半軸承和薄壁襯套的壁厚測量
| Plain bearings - Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes
|
| BS 7823-1-1995
| 托架滑動軸承.軸承座部件規范
| Pedestal plain bearings - Specification for pillow blocks
|
| BS 7823-2-1995
| 托架滑動軸承.側邊法蘭軸承規范
| Pedestal plain bearings - Specification for side flange bearings
|
| BS 7823-3-1995
| 托架滑動軸承.中心法蘭軸承規范
| Pedestal plain bearings - Specification for centre flange bearings
|
| BS EN 12080-1998
| 鐵路設施.車箱體.滾動軸承
| Railway applications - Axleboxes - Rolling bearings
|
| BS EN 1337-10-2003
| 結構軸承.檢驗和維護
| Structural bearings - Inspection and maintenance
|
| BS EN 1337-11-1998
| 結構軸承.運輸,儲存和安裝
| Structural bearings - Transport, storage and installation
|
| BS EN 1337-4-2004
| 結構軸承.滾柱軸承
| Structural bearings - Roller bearings
|
| BS EN 1337-6-2004
| 結構軸承.搖桿軸承
| Structural bearings - Rocker bearings
|
| BS EN 1337-9-1998
| 結構軸承.防護
| Structural bearings - Protection
|
| BS EN 2009-1992
| 軸承.鋼的8號和9號直徑系列機體剛性單列球軸承、尺寸和負荷
| Bearings - Airframe rolling rigid, single row ball bearings in steel diameter series 8 and 9. Dimensions and loads
|
| BS EN 2011-1989
| 軸承規范.耐蝕鋼的8號和9號直徑系列機體剛性單列球軸承.尺寸和負荷
| Specification for bearings - airframe rolling rigid single row ball bearings in corrosion resisting steel diameter series 8 and 9. Dimensions and loads
|
| BS EN 2012-1989
| 軸承規范.鋼的0號和2號直徑系列機體剛性單列球軸承.尺寸和負荷
| Specification for bearings - airframe rolling rigid, single row ball bearings in steel diameter series 0 and 2. Dimensions and loads
|
| BS EN 2014-1989
| 軸承規范.耐蝕鋼的0號和2號直徑系列機體剛性單列球軸承.尺寸和負荷
| Specification for bearings - airframe rolling rigid single row ball bearings in corrosion resisting steel diameter series 0 and 2. Dimensions and loads
|
| BS EN 2015-1989
| 軸承規范.鋼的2號直徑系列機體雙列自調心球軸承.尺寸和負荷
| Specification for bearings - airframe rolling double row, self aligning ball bearings in steel diameter series 2. Dimensions and loads
|
| BS EN 2017-1989
| 軸承規范.耐蝕鋼的2號直徑系列機體雙列自調心球軸承.尺寸和負荷
| Specification for bearings - airframe rolling double row self aligning ball bearings in corrosion resisting steel diameter series 2. Dimensions and loads
|
| BS EN 2018-1989
| 軸承規范.鋼的3號和4號直徑系列機體單列自調心滾子軸承.尺寸和負荷
| Specification for bearings - airframe rolling single row, self aligning roller bearings in steel diameter series 3 and 4. Dimensions and loads
|
| BS EN 2020-1989
| 軸承規范.耐蝕鋼3號和4號直徑系列的機體單列自調心滾子軸承.尺寸和負荷
| Specification for bearings - airframe rolling single row self aligning roller bearings in corrosion resisting steel diameter series 3 and 4. Dimensions and loads
|
| BS EN 2022-1990
| 帶自潤滑內襯的耐蝕鋼的普通球面軸承規范.輕型系列.尺寸和負荷
| Specification for bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Dimensions and loads
|
| BS EN 2023-1989
| 軸承規范.帶自潤滑內襯的耐蝕鋼普通球面軸承.標準系列.尺寸和負荷
| Specification for bearings - spherical plain in corrosion resisting steel with self-lubricating liner - Normal series - Dimensions and loads
|
| BS EN 2063-1992
| 飛行器機體滾動軸承.技術規范
| Airframe rolling bearings - Technical specification
|
| BS EN 2064-1992
| 自潤滑軸套耐蝕鋼球面滑動軸承.技術規范
| Bearings, spherical plain in corrosion resisting steel with self lubricating liner - Technical specification
|
| BS EN 2067-1996
| 帶自調心球軸承的桿端頭.技術規范
| Rod ends with self-aligning ball bearings - Technical specification
|
| BS EN 2068-1996
| 帶自潤滑自調心軸承的桿端頭.技術規范
| Rod ends with self-lubricating self-aligning bearings - Technical specification
|
| BS EN 2079-1995
| 儀器和設備用的耐蝕鋼的帶法蘭的精密球形軸承.尺寸和負荷
| Bearings, precision ball with flange in corrosion resisting steel, for instruments and equipment - Dimensions and loads
|
| BS EN 2130-2001
| 航空航天系列.儀器和設備用耐蝕鋼制軸承和精密滾珠.技術規范
| Aerospace Series - Bearings, precision ball in corrosion resisting steel for instruments and equipment - Technical specification
|
| BS EN 2335-1990
| 無裝配槽的耐蝕鋼普通球面軸承規范.尺寸和載荷
| Specification for bearings-spherical plain in corrosion resisting steel without assembly slot - Dimensions and loads
|
| BS EN 2356-1989
| 耐蝕鋼滾動軸承用操縱鋼索的帶螺紋叉形端頭規范.尺寸和負荷
| Specification for fork-ends threaded, control cable for rolling bearings in corrosion resisting steel - Dimensions and loads
|
| BS EN 2360-1989
| 操縱鋼索的旋鍛耐蝕鋼滾動軸承的叉形端頭規范.尺寸和負荷
| Specification for fork-ends for rolling bearings in corrosion resisting steel swaged on type, control cable - Dimensions and loads
|
| BS EN 2498-1990
| 帶自潤滑內襯和螺紋柄的可調節的自調心普通軸承的桿形端頭規范.尺寸和規范
| Specification for rod ends, adjustable self-aligning plain bearing, with self-lubricating liner and threaded shank - Dimensions and loads
|
| BS EN 2501-1992
| 軸承.帶自潤滑內襯和寬內環的耐蝕鋼普通球面軸承.尺寸和負荷
| Bearings, spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring - Dimensions and loads
|
| BS EN 2584-2001
| 航空航天系列.具有自潤滑軸套的球面耐蝕鋼軸承.窄系列.環境溫度下的高負荷.尺寸和負荷
| Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads
|
| BS EN 2585-2001
| 航空航天系列.具有自潤滑軸套的球面耐蝕鋼軸承.寬系列.環境溫度下的高負荷.負荷和尺寸
| Aerospace series - Bearings, spherical plain in corrosion-resisting steel with self-lubricating liner - Elevated load at ambient temperature - Dimensions and loads
|
| BS EN 2790-1991
| 帶自潤滑套和嚙合量為1.5的螺紋軸的可動調自定位滾動軸承桿端.尺寸和負載
| Rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank with engagement: 1.5 thread - Dimensions and loads
|
| BS EN 3045-1994
| 機體軸承.鋼制的剛性單列滾珠軸承.0號和2號直徑系列.小游隙類.尺寸和負荷
| Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2. Reduced clearance category - Dimensions and loads
|
| BS EN 3046-1994
| 機體軸承.鍍鎘鋼的剛性單列滾珠軸承.0號和2號直徑系列.小游隙類.尺寸和負荷
| Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2. Reduced clearance category - Dimensions and loads
|
| BS EN 3047-1994
| 機體軸承.耐腐蝕鋼的剛性單列球軸承.0號和2號直徑系列.小游隙類.尺寸和負荷
| Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2. Reduced clearance category - Dimensions and loads
|
| BS EN 3048-2001
| 有自潤滑軸套的防腐鋼球面軸承.輕型系列.環境溫度下的高負荷.尺寸和負荷
| Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and loads
|
| BS EN 3053-1994
| 機體軸承.鋼制的單列自調心滾子軸承.尺寸和負載
| Bearings, airframe rolling - Single row self-aligning roller bearings in steel - Dimensions and loads
|
| BS EN 3054-1994
| 機體軸承.鍍鉻的鋼制的單列自調心滾子軸承.尺寸和負載
| Bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Dimensions and loads
|
| BS EN 3055-1994
| 機體軸承.耐蝕鋼的單列自調心滾子軸承.尺寸和負荷
| Bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Dimensions and loads
|
| BS EN 3056-1994
| 機體軸承.鋼制的剛性雙列球軸承.尺寸和負荷
| Bearings, airframe rolling - Rigid double row ball bearings in steel - Dimensions and loads
|
| BS EN 3057-1994
| 機體軸承.鍍鉻的鋼制的剛性雙列球軸承.尺寸和負載
| Bearings, airframe rolling - Rigid double row ball bearings in steel, cadmium plated - Dimensions and loads
|
| BS EN 3058-1994
| 機體軸承..耐蝕鋼的剛性雙列球軸承.尺寸和負載
| Bearings, airframe rolling - Rigid double row ball bearings in corrosion resisting steel - Dimensions and loads
|
| BS EN 3280-1994
| 剛性或自調心的機體軸承.技術規范
| Bearings, airframe rolling, rigid or self-aligning - Technical specification
|
| BS EN 3281-1994
| 機體軸承.鋼制的剛性單列球軸承.8號和9號直徑系列.尺寸和負荷
| Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 8 and 9. Dimensions and loads
|
| BS EN 3282-1994
| 機體軸承.鋼制的鍍鎘剛性單列球軸承.8號和9號直徑系列.尺寸和負荷
| Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 8 and 9. Dimensions and loads
|
| BS EN 3283-1994
| 機體軸承.耐蝕鋼的剛性排列球軸.8號和9號直徑系列.尺寸和負荷
| Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9. Dimensions and loads
|
| BS EN 3284-1994
| 機體軸承.鋼制的剛性單列球軸承.0號和2號直徑系列.標準游隙類.尺寸和負荷
| Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2. Normal clearance category - Dimensions and loads
|
| BS EN 3285-1994
| 機體軸承.鋼制的鍍鎘剛性單列球軸承.0號和2號直徑系列.標準游隙類.尺寸和負荷
| Bearings; airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2. Normal clearance category - Dimensions and loads
|
| BS EN 3286-1994
| 機體軸承.耐蝕鋼的剛性單列球軸承.0號和2號直徑系列.標準游隙類.尺寸和負荷
| Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2. Normal clearance category - Dimensions and loads
|
| BS EN 3287-1994
| 機體軸承.鋼制的雙列自調心球軸承.2號直徑系列.尺寸和負荷
| Bearings, airframe rolling - Double row self-aligning ball bearings in steel - Diameter series 2. Dimensions and loads
|
| BS EN 3288-1994
| 機體軸承.鋼制的鍍鎘雙列自調心球軸承.2號直徑系列.尺寸和負荷
| Bearings, airframe rolling - Double row self-aligning ball bearings in steel, cadmium plated - Diameter series 2. Dimensions and loads
|
| BS EN 3289-1994
| 機體軸承.耐蝕鋼的自調心雙列球軸承.2號直徑系列.尺寸和負荷
| Bearings, airframe rolling - Double row self-aligning ball bearings in corrosion resisting steel - Diameter series 2. Dimensions and loads
|
| BS EN 3290-1994
| 機體軸承.鋼制的單列自調心滾子軸承.3號和4號直徑系列.尺寸和負荷
| Bearings, airframe rolling - Single row self-aligning roller bearings in steel - Diameter series 3 and 4. Dimensions and loads
|
| BS EN 3291-1994
| 機體軸承.鋼制的鍍鎘單列自調心滾子軸承.3號和4號直徑系列.尺寸和負荷
| Bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Diameter series 3 and 4. Dimensions and loads
|
| BS EN 3292-1994
| 機體軸承.耐蝕鋼的單列自調心滾子軸承.3號和4號直徑系列.尺寸和負荷
| Bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Diameter series 3 and 4. Dimensions and loads
|
| BS EN 3446-1995
| 儀器和設備用的耐蝕鋼的不帶法蘭的精密球軸承.尺寸和負荷
| Bearings, precision ball without flange in corrosion resisting steel, for instruments and equipment - Dimensions and loads
|
| BS EN 3541-1992
| 帶螺柄的端桿、可調、自對準球軸承.尺寸、扭矩、間隙和載荷
| Rod ends, adjustable, self-aligning ball bearing with threaded shank - Dimensions, torques, clearances and loads
|
| BS EN 4035-2006
| 航空航天系列.減小內部徑向間隙和帶螺紋鈦合金桿耐腐蝕鋼可調自動對心雙列球軸承的桿端.尺寸和載荷
| Aerospace series - Rod ends, adjustable with self-aligning double row ball bearing in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy - Dimensions and loads
|
| BS EN 4040-2006
| 航空航天.寬內環的帶自潤滑內襯的耐蝕鋼制關節軸承.室溫高負荷.尺寸和負荷
| Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring - Elevated loads at ambient temperature - Dimensions and loads |
| BS EN 715-1995
| 熱塑管道系統.小直徑壓力管和配件間端部負荷軸承接頭.在包含端推力的內部水壓下密封性的試驗方法
| Thermoplastics piping systems - End-load-bearing joints between small diameter pressure pipes and fittings - Test method for leaktightness under internal water pressure, including end thrust
|
| BS EN ISO 683-17-1999
| 熱處理鋼、合金鋼和易切削鋼.滾珠軸承和滾柱軸承鋼
| Heat-treated steels, alloy steels and free-cutting steels - Ball and roller bearing steels
|
| BS EN ISO 8826-1-1995
| 技術制圖.滾柱軸承.通用簡化畫法
| Technical drawings - Roller bearings - General simplified representation
|
| BS EN ISO 8826-2-1997
| 技術制圖.滾子軸承.詳細簡化畫法
| Technical drawings - Roller bearings - Detailed simplified representation
|
| BS ISO 104-2002
| 滾動軸承.止推軸承. 外形尺寸.總體計劃
| Rolling bearings - Thrust bearings - Boundary dimensions, general plan
|
| BS ISO 10766-2006
| 液壓動力.汽缸.活塞及連桿用矩形截面軸承環溝槽尺寸
| Hydraulic fluid power - Cylinders - Housing dimensions forrectangular-sect bearing rings for pistons and rods
|
| BS ISO 10792-1-1996
| 航空和航天.帶自潤滑襯瓦的耐腐蝕鋼機體球面滑動軸承.公制系列
| Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Metric series
|
| BS ISO 10792-2-1996
| 航空和航天.帶自潤滑襯瓦的耐腐蝕鋼機體球面滑動軸承.英制系列
| Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Inch series
|
| BS ISO 10792-3-1996
| 航空和航天.帶自潤滑襯瓦的耐腐蝕鋼機體球面滑動軸承.技術規范
| Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Technical specification
|
| BS ISO 113-1999
| 滾動軸承.軸承座.外形尺寸
| Rolling bearings - Plummer block housings - Boundary dimensions
|
| BS ISO 1132-1-2000
| 滾動軸承.公差.術語和定義
| Rolling bearings - Tolerances - Terms and definitions
|
| BS ISO 1132-2-2002
| 滾動軸承.公差.測量和校驗原理和方法
| Rolling bearings - Tolerances - Measuring and gauging principles and methods
|
| BS ISO 12043-1995
| 滾動軸承.單列圓柱形滾子軸承.活動肋和無肋側面倒角尺寸
| Rolling bearings - Single-row cylindrical roller bearings - Chamfer dimensions for loose rib and non-rib sides
|
| BS ISO 12044-1995
| 滾動軸承.單列角面接觸的滾珠軸承.外圈無止推側面倒角尺寸
| Rolling bearings - Single-row angular contact ball bearings - Chamfer dimensions for outer ring non-thrust side
|
| BS ISO 1206-2002
| 滾動軸承.尺寸系列為48,49和69的滾針軸承.邊界尺寸和公差
| Rolling bearings - Needle roller bearings, dimension series 48, 49 and 69 - Boundary dimensions and tolerances
|
| BS ISO 12128-2002
| 滑動軸承.潤滑油孔、油槽和油穴.尺寸、類型、標記及其對軸套的應用
| Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes
|
| BS ISO 12129-2-1995
| 滑動軸承.軸、法蘭和止推安裝環形狀、位置和表面粗糙度公差
| Plain bearings - Tolerances on form and position and surface roughness for shafts, flanges and thrust collars
|
| BS ISO 12132-2000
| 滑動軸承.薄壁軸瓦質量保證.FMEA設計
| Plain bearings - Quality assurance of thin-walled half bearings - Design FMEA
|
| BS ISO 12240-1-1998
| 球形滑動軸承.徑向球形滑動軸承
| Spherical plain bearings - Radial spherical plain bearings
|
| BS ISO 12240-2-1998
| 球形滑動軸承.角面接觸徑向球形滑動軸承
| Spherical plain bearings - Angular contact radial spherical plain bearings
|
| BS ISO 12240-3-1998
| 球形滑動軸承.止推球形滑動軸承
| Spherical plain bearings - Thrust spherical plain bearings
|
| BS ISO 12240-4-1998
| 球形滑動軸承.球形滑動軸承桿端
| Spherical plain bearings - Spherical plain bearing rod ends
|
| BS ISO 12303-1995
| 滑動軸承.質量特性.機器和加工性能的計算
| Plain bearings - Quality characteristics - Calculation of machine and process capabilities
|
| BS ISO 12307-2-2000
| 滑動軸承.卷制軸套檢驗.內徑的檢驗
| Plain bearings - Checking of wrapped bushes - Checking the inside diameter
|
| BS ISO 13012-1998
| 套筒型循環球體直線運動滾動軸承.附件
| Rolling bearings, linear motion, recirculating ball, sleeve type - Accessories
|
| BS ISO 13778-1999
| 滑動軸承.薄壁軸瓦的質量保證.小間隙范圍軸承的選配
| Plain bearings - Quality assurance of thin-walled half bearings - Selective assembly of bearings to achieve a narrow clearance range
|
| BS ISO 14728-1-2004
| 滾動軸承.線性運動滾動軸承.動態荷載額定值和額定壽命
| Rolling bearings - Linear motion rolling bearings - Dynamic load ratings and rating life
|
| BS ISO 14728-2-2004
| 滾動軸承.線性運動滾動軸承.靜態荷載額定值
| Rolling bearings - Linear motion rolling bearings - Static load ratings
|
| BS ISO 14839-1-2002
| 機械振動.裝有主動磁性軸承的旋轉機械裝置的振動.詞匯
| Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Vocabulary
|
| BS ISO 14839-2-2004
| 機械振動.裝有主動磁性軸承的旋轉機械的振動.振動評價
| Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Evaluation of vibration
|
| BS ISO 15-1998
| 滾動軸承.徑向軸承.邊界尺寸、一般計劃
| Rolling bearings - Radial bearings - Boundary dimensions, general plan
|
| BS ISO 15241-2002
| 滾動軸承.量值符號
| Rolling bearings - Symbols for quantities
|
| BS ISO 15242-1-2004
| 滾動軸承.振動測量方法.基本原則
| Rolling bearings - Measuring methods for vibration - Fundamentals
|
| BS ISO 15242-2-2005
| 滾動軸承.振動測量方法.帶圓柱芯和外表面的徑向滾珠軸承
| Rolling bearings - Measuring methods for vibration - Radial ball bearings with cylindrical bore and outside surface
|
| BS ISO 15242-3-2006
| 滾動軸承.振動測量方法.帶圓孔和外表面的向心球面和圓錐滾子軸承
| Rolling bearings - Measuring methods for vibration - Radial spherical and tapered roller bearings with cylindrical bore and outside surface
|
| BS ISO 15243-2004
| 滾動軸承.損害和故障.術語、特性和成因
| Rolling bearings - Damage and failures - Terms, characteristics and causes
|
| BS ISO 15312-2004
| 滾動軸承.熱速額定值.計算和系數
| Rolling bearings - Thermal speed rating - Calculation and coefficients
|
| BS ISO 16287-2005
| 滑動軸承.熱塑性軸襯.尺寸和公差
| Plain bearings - Thermoplastic bushes - Dimensions and tolerances
|
| BS ISO 199-2006
| 滾動軸承.止推軸承.公差
| Rolling bearings - Thrust bearings - Tolerances
|
| BS ISO 21107-2004
| 滾動軸承和球面滑動軸承.電子介質用查尋結構.用屬性詞匯標識的特性和性能標準
| Rolling bearings and spherical plain bearings - Search structure for electronic media - Characteristics and performance criteria identified by attribute vocabulary
|
| BS ISO 246-1995
| 滾動軸承.滾柱軸承、分離式止推環.界面尺寸
| Rolling bearings - Cylindrical roller bearings, separate thrust collars - Boundary dimensions
|
| BS ISO 2982-1-1996
| 滾動軸承.附件.錐形套筒.尺寸
| Rolling bearings - Accessories - Tapered sleeves - Dimensions
|
| BS ISO 2982-2-2001
| 滾動軸承.附件.防松螺母和鎖緊裝置.尺寸
| Rolling bearings - Accessories - Locknuts and locking devices - Dimensions
|
| BS ISO 3030-1997
| 滾動軸承.徑向針形滾筒和柜式組件.尺寸和公差
| Rolling bearings - Radial needle roller and cage assemblies - Dimensions and tolerances
|
| BS ISO 3031-2000
| 滾動軸承.止推滾針、保持架組件和止推墊圈.外形尺寸和公差
| Rolling bearings - Thrust needle roller and cage assemblies, thrust washers - Boundary dimensions and tolerances
|
| BS ISO 3096-1997
| 滾動軸承.針形滾筒.尺寸和公差
| Rolling bearings - Needle rollers - Dimensions and tolerances
|
| BS ISO 3245-1997
| 滾動軸承.拉制的杯形無內環滾針軸承.外形尺寸和公差
| Rolling bearings - Needle roller bearings, drawn cup without inner rings - Boundary dimensions and tolerances
|
| BS ISO 3290-2002
| 滾動軸承.球軸承.尺寸和公差
| Rolling bearings - Balls - Dimensions and tolerances
|
| BS ISO 3547-1-2000
| 滑動軸承.卷制軸套.尺寸
| Plain bearings - Wrapped bushes - Dimensions
|
| BS ISO 3547-2-2000
| 滑動軸承.卷制軸套.外徑和內徑試驗數據
| Plain bearings - Wrapped bushes - Test data for outside and inside diameter
|
| BS ISO 3547-3-2000
| 滑動軸承.卷制軸套.潤滑油孔、油槽和油穴
| Plain bearings - Wrapped bushes - Lubrication holes, lubrication grooves and lubrication indentations
|
| BS ISO 3547-4-2000
| 滑動軸承.卷制軸套.材料
| Plain bearings - Wrapped bushes - Materials
|
| BS ISO 3548-2000
| 滑動軸承.帶或不帶法蘭的薄壁軸瓦.公差、設計特點和試驗方法
| Plain bearings - Thin-walled half bearings with or without flange - Tolerances, design features and methods of test
|
| BS ISO 4381-2000
| 普通軸承.多層普通軸承用鉛錫鑄造合金
| Plain bearings - Lead and tin casting alloys for multilayer plain bearings
|
| BS ISO 4383-2000
| 普通軸承.薄壁普通軸承用多層材料
| Plain bearings - Multilayer materials for thin-walled plain bearings
|
| BS ISO 4384-1-2000
| 普通軸承.軸承合金的硬度試驗.復合材料
| Plain bearings - Hardness testing of bearing metals - Compound materials
|
| BS ISO 464-1995
| 滾動軸承.定位固定環的徑向軸承.尺寸和公差
| Rolling bearings - Radial bearings with locating snap ring - Dimensions and tolerances
|
| BS ISO 492-2002
| 滾動軸承.徑向軸承.公差
| Rolling bearings - Radial bearings - Tolerances
|
| BS ISO 5593-1998
| 滾動軸承.詞匯
| Rolling bearings - Vocabulary
|
| BS ISO 582-1995
| 滾動軸承.倒角尺寸.最大值
| Rolling bearings - Chamfer dimensions - Maximum values
|
| BS ISO 6811-1998
| 球形滑動軸承.詞匯
| Spherical plain bearings - Vocabulary
|
| BS ISO 7063-2004
| 滾動軸承.滾針軸承滾道滾針.邊界尺寸和公差
| Rolling bearings - Needle roller bearing track rollers - Boundary dimensions and tolerances
|
| BS ISO 7148-1-2000
| 滑動軸承.軸承材料摩擦特性試驗.軸承金屬試驗
| Plain bearings - Testing of tribological behaviour of bearing materials - Testing of bearing metals
|
| BS ISO 7148-2-2000
| 滑動軸承.軸承材料摩擦特性試驗.聚合物基體軸承材料試驗
| Plain bearings - Testing of tribological behaviour of bearing materials - Testing of polymer-based bearing materials
|
| BS ISO 8443-1999
| 滾動軸承.凸緣外圈向心珠軸承.凸緣尺寸
| Rolling bearings - Radial ball bearings with flanged outer ring - Flange dimensions
|
| BS ISO 9758-2001
| 航空器操縱鋼絲繩用滾動軸承的螺紋式鋼制叉形端.尺寸及載荷
| Fork-ends, in corrosion-resistant steel, threaded, for rolling bearings, for aircraft control wire rope - Dimensions and loads
|
| BS ISO 9760-2001
| 航空航天.航空器滾動軸承操縱鋼絲繩上的鍛制耐腐蝕鋼制叉形端.尺寸及載荷
| Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings - Dimensions and loads
|
| BS ISO/TS 16799-2000
| 滾動軸承.動力負荷額定值和額定壽命.基本動力負荷額定值計算中的不連續性
| Rolling bearings - Dynamic load ratings and rating life - Discontinuities in the calculating of basic dynamic load ratings
|
| KIT 162-2005
| 結構軸承匯編
| Structural bearings kit
|
| 編號 | 中文名稱 | 英文名稱 |
|---|