| 編號 | 中文名稱 | 英文名稱 |
|---|
| GB/T 272-1993
| 滾動軸承代號方法
| Rolling bearing--Identification code
|
| GB/T 275-1993
| 滾動軸承與軸和外殼的配合
| Shaft and housing fits for rolling bearings
|
| GB/T 7810-1995
| 滾動軸承帶座外球面球軸承外形尺寸
| Rolling bearings--Insert bearing units--Boundary dimensions
|
| GB/T 14364-1993
| 船舶軸系滑動式中間軸承
| Marine intermediate shafting sliding bearing
|
| GB/T 1174-1992
| 鑄造軸承合金
| Cast bearing metals
|
| FZ/T 92013-2006
| SL系列上羅拉軸承
| SL series top roller bearings
|
| FZ/T 92024-2006
| LZ系列下羅拉軸承
| LZ series botton roller bearings
|
| GB/T 10445-1989
| 滑動軸承整體軸套的軸徑
| Plain bearings--Shaft diameters for unsplit bushes
|
| GB/T 10446-1989
| 滑動軸承整圓止推墊圈尺寸和公差
| Plain bearings--Ring type thrust washers made from strip--Dimensions and tolerances
|
| GB/T 10447-1989
| 滑動軸承半圓止推墊圈要素和公差
| Plain bearings--Pressed bimetallic half thrust washers--Features and tolerances
|
| GB/T 12613.1-2002
| 滑動軸承卷制軸套第1部分:尺寸
| Plain bearings--Wrapped bushes--Part 1:Dimensions
|
| GB/T 12613.2-2002
| 滑動軸承卷制軸套第2部分:外徑和內徑的檢測數據
| Plain bearings--Wrapped bushes--Part 2:Test data for outside and inside diameter
|
| GB/T 12613.3-2002
| 滑動軸承卷制軸套第3部分:潤滑油孔、潤滑油槽和潤滑油穴
| Plain bearings--Wrapped bushes--Part 3:Lubrication holes，lubrication grooves and lubricationindentations
|
| GB/T 12613.4-2002
| 滑動軸承卷制軸套第4部分:材料
| Plain bearings--Wrapped bushes--Part 4:Materials
|
| GB/T 12764-1991
| 滾動軸承沖壓外圈滾針軸承外形尺寸方案
| Rolling bearings--Needle rollerbearings，drawn cup，without inner ring--Boundary dimension plan
|
| GB/T 12765-1991
| 關節軸承安裝尺寸
| Spherical plain bearings，joint type--Abutment andfillet dimensions
|
| GB/T 12948-1991
| 滑動軸承雙金屬結合強度破壞性試驗方法
| Plain bearings--Metallic multilayer plain bearings--Destructive testing of bond for bearing metals
|
| GB/T 12949-1991
| 滑動軸承覆有減摩塑料層的雙金屬軸套
| Plain bearings--Bimetallic busheswith plastic overlay
|
| GB/T 13345-1992
| 軋機油膜軸承通用技術條件
| General technical requirement of oil film bearing for rolling mill
|
| GB/T 14036-1993
| 液壓缸活塞桿端帶關節軸承耳環安裝尺寸
| Hydraulic fluid power--Cylinders--Rod end spherical eyes--Mounting dimensions
|
| GB/T 14910-1994
| 滑動軸承厚壁多層軸承襯背技術要求
| Plain bearings--Requirements on backings for thick-walled multilayer bearings
|
| GB/T 16643-1996
| 滾動軸承滾針和推力圓柱滾子組合軸承外形尺寸
| Rolling bearings--Combined needle roller thrust roller bearings--Boundary dimensions
|
| GB/T 16748-1997
| 滑動軸承金屬軸承材料的壓縮試驗
| Plain bearings--Compression testing of metallic bearing materials
|
| GB/T 16925-1997
| 混凝土及其制品耐磨性試驗方法(滾珠軸承法)
| Test method for abrasion resistance of concrete and its products(Ball bearing method)
|
| GB/T 16940-1997
| 直線運動支承直線運動球軸承外形尺寸和公差
| Linear motion bearings--Linear motion ball bearings--Boundary dimensions and tolerances
|
| GB/T 18254-2002
| 高碳鉻軸承鋼
| High-carbon chromium bearing steel
|
| GB/T 18323-2001
| 滑動軸承燒結軸套的尺寸和公差
| Plain bearings--Sintered bushes--Dimensions and tolerances
|
| GB/T 18324-2001
| 滑動軸承銅合金軸套
| Plain bearings--Copper alloy bushes
|
| GB/T 18325.1-2001
| 滑動軸承流體動壓潤滑條件下試驗機內和實際應用的滑動軸承疲勞強度
| Plainbearings--Bearing fatigue--Plain bearings in test rigs and in application underconditions of hydrodynamic lubrication
|
| GB/T 18326-2001
| 滑動軸承薄壁滑動軸承用金屬多層材料
| Plain bearings--Multilayer materials for thin-walled plain bearings
|
| GB/T 18327.1-2001
| 滑動軸承基本符號
| Plain bearings--Basic symbols
|
| GB/T 18327.2-2001
| 滑動軸承應用符號
| Plain bearings--Applications
|
| GB/T 18329.1-2001
| 滑動軸承多層金屬滑動軸承結合強度的超聲波無損檢驗
| Plain bearings--Non-destructive ultrasonic testing of hond for metallic multilayer plain bearings
|
| GB/T 18330-2001
| 滑動軸承薄壁軸瓦和薄壁軸套的壁厚測量
| Plain bearings--Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes
|
| GB/T 18331.1-2001
| 滑動軸承卷制軸套外徑的檢測
| Plain bearings--Checking the outside diameter for wrapped bushes
|
| GB/T 18579-2001
| 高碳鉻軸承鋼絲
| High-carbon chromium bearing steel wires
|
| GB/T 18844-2002
| 滑動軸承損壞和外觀變化的術語、特征及原因
| Plain bearings--Terms，characteristics and causes of damage and changes in appearance
|
| GB/T 19673-2005
| 直線運動滾動支承套筒型循環球直線運動軸承附件
| Linear motion rolling bearings-Rolling bearings,linear motion ball,recirculating,sleeve type-Accessories
|
| GB/T 20056-2006
| 滾動軸承向心滾針和保持架組件 尺寸和公差
| Rollingbearings - Radialneedlerollerandcageassemblies - Dimensions and tolerances
|
| GB/T 20057-2006
| 滾動軸承 單列圓柱滾子軸承 平擋圈和套圈無擋邊端倒角尺寸
| Rolling bearings ― Single-row cylindrical roller bearings ― Chamfer dimensions for loose rib and non-rib sides
|
| GB/T 20058-2006
| 滾動軸承 單列角接觸球軸承 外圈非推力端倒角尺寸
| Rolling bearings ― Single-row angular contact ball bearings ― Chamfer dimensions for outer ring non-thrust side
|
| GB/T 20059-2006
| 滾動軸承額定動載荷和額定壽命基本額定動載荷計算中的間斷點
| Rolling bearings - Dynamic load ratings and rating life - Discontinuities in the calculating of basic dynamic load ratings
|
| GB/T 20060-2006
| 滾動軸承圓柱滾子軸承可分離斜擋圈外形尺寸
| Rolling bearings - Cylindrical roller bearings, separate thrust collars - Boundary dimensions
|
| GB/T 2688-1981
| 滑動軸承粉末冶金軸承技術條件
| Powder metallurgy plain bearing--Technical requirements
|
| GB/T 271-1997
| 滾動軸承分類
| Rolling bearings--Classification
|
| GB/T 273.1-2003
| 滾動軸承圓錐滾子軸承外形尺寸總方案
| Rolling bearings--Tapered roller bearing--Plan of boundary dimensions
|
| GB/T 273.2-2006
| 滾動軸承推力軸承外形尺寸總方案
| Rolling bearings - Thrust bearings - Boundary dimensions, general plan
|
| GB/T 273.3-1999
| 滾動軸承向心軸承外形尺寸總方案
| Rolling bearings--Radial bearings--Boundary dimensions，general plan
|
| GB/T 274-2000
| 滾動軸承倒角尺寸最大值
| Rolling bearings--Chamfer dimension--Maximumvalues
|
| GB/T 276-1994
| 滾動軸承深溝球軸承外形尺寸
| Rolling bearings--Deep groove ball bearings--Boundary dimensions
|
| GB/T 281-1994
| 滾動軸承調心球軸承外形尺寸
| Rolling bearings--Self-aligning ball bearings--Boundary dimensions
|
| GB/T 285-1994
| 滾動軸承雙列圓柱滾子軸承外形尺寸
| Rolling bearings--Double row cylindrical roller bearings--Boundary dimensions
|
| GB/T 288-1994
| 滾動軸承調心滾子軸承外形尺寸
| Rolling bearings--Self-aligning roller bearings--Boundary dimensions
|
| GB/T 2889-1994
| 滑動軸承術語
| Plain bearings--Terms，definitions and classification
|
| GB/T 290-1998
| 滾動軸承沖壓外圈滾針軸承外形尺寸
| Rolling bearings--Needle roller bearings，drawn cup without inner rings--Boundary dimensions
|
| GB/T 294-1994
| 滾動軸承三點和四點接觸球軸承外形尺寸
| Rolling bearings--Three pointand four point contact ball bearings--Boundary dimensions
|
| GB/T 296-1994
| 滾動軸承雙列角接觸球軸承外形尺寸
| Rolling bearings--Double row angular contact ball bearings--Boundary dimensions
|
| GB/T 297-1994
| 滾動軸承圓錐滾子軸承外形尺寸
| Rolling bearings--Tapered roller bearings--Boundary dimensions
|
| GB/T 299-1995
| 滾動軸承雙列圓錐滾子軸承外形尺寸
| Rolling bearings--Metric double row tapered roller bearings--Boundary dimensions
|
| GB/T 300-1995
| 滾動軸承四列圓錐滾子軸承外形尺寸
| Rolling bearings--Four row tapered roller bearings--Boundary dimensions
|
| GB/T 301-1995
| 滾動軸承推力球軸承外形尺寸
| Rolling bearings--Thrust ball bearings--Boundary dimensions
|
| GB/T 304.1-2002
| 關節軸承分類
| Spherical plain bearings--Classification
|
| GB/T 304.2-2002
| 關節軸承代號方法
| Spherical plain bearings--Identification code
|
| GB/T 304.3-2002
| 關節軸承配合
| Spherical plain bearings--Fits
|
| GB/T 304.9-1981
| 向心關節軸承技術條件
| Spherical plain radial bearings，joint type--Technical requirements
|
| GB/T 305-1998
| 滾動軸承外圈上的止動槽和止動環尺寸和公差
| Rolling bearings--Snap ring groove and snap ring on outer ring--Dimensions and tolerances
|
| GB/T 307.1-2005
| 滾動軸承向心軸承公差
| Rolling bearings-Radial bearings-Tolerances
|
| GB/T 307.2-2005
| 滾動軸承測量和檢驗的原則及方法
| Rolling bearings-Measuring and gauging principles and methods
|
| GB/T 307.3-2005
| 滾動軸承通用技術規則
| Rolling bearings-General technical regulations
|
| GB/T 307.4-2002
| 滾動軸承推力軸承公差
| Rolling bearings--Thrust bearings--Tolerances
|
| GB/T 308-2002
| 滾動軸承鋼球
| Rolling bearings--Steel balls
|
| GB/T 3086-1982
| 高碳鉻不銹軸承鋼技術條件
| Specification for high carbon chromium stainless bearing steels
|
| GB/T 309-2000
| 滾動軸承滾針
| Rolling bearings--Needle rollers
|
| GB/T 3162-1991
| 滑動軸承薄壁軸瓦尺寸、結構要素與公差
| Plain bearings--Thin-walled bearing shells--Dimensions，structure elements and tolerances
|
| GB/T 3203-1982
| 滲碳軸承鋼技術條件
| Specification for carburizing steels of bearings
|
| GB/T 3882-1995
| 滾動軸承外球面球軸承和偏心套外形尺寸
| Rolling bearings--Insert bearings and eccentric looking collars--Boundary dimensions
|
| GB/T 3944-2002
| 關節軸承詞匯
| Spherical plain bearings--Vocabulary
|
| GB/T 4199-2003
| 滾動軸承公差定義
| Rolling bearings--Tolerances--Definitions
|
| GB/T 4459.7-1998
| 機械制圖滾動軸承表示法
| Mechanical drawings--Representation of rolling bearings
|
| GB/T 4604-2006
| 滾動軸承徑向游隙
| Rolling bearings - Radial internal clearance
|
| GB/T 4605-2003
| 滾動軸承推力滾針和保持架組件及推力墊圈
| Rolling bearings--Thrust needle roller and cage assemblies，thrust washers
|
| GB/T 4648-1996
| 滾動軸承圓錐滾子軸承凸緣外圈外形尺寸
| Rolling bearings--Metric tapered roller bearings--Flanged cups--Boundary dimensions
|
| GB/T 4661-2002
| 滾動軸承圓柱滾子
| Rolling bearings--Cylindrical rollers
|
| GB/T 4662-2003
| 滾動軸承額定靜載荷
| Rolling bearings--Static load ratings
|
| GB/T 4663-1994
| 滾動軸承推力圓柱滾子軸承外形尺寸
| Rolling bearings--Cylindrical thrust roller bearings--Boundary dimensions
|
| GB/T 5800-2003
| 滾動軸承儀器用精密軸承
| Rolling bearings--Instrument precision bearings
|
| GB/T 5801-2006
| 滾動軸承48、49和69尺寸系列滾針軸承外形尺寸和公差
| Rolling bearings - Needle roller bearings, dimension series 48, 49 and 69 - Boundary dimensions and tolerances
|
| GB/T 5859-1994
| 滾動軸承推力調心滾子軸承外形尺寸
| Rolling bearings--Self-aligning thrust roller bearings--Boundary dimensions
|
| GB/T 5868-2003
| 滾動軸承安裝尺寸
| Rolling bearings--Mounting dimensions
|
| GB/T 6391-2003
| 滾動軸承額定動載荷和額定壽命
| Rolling bearings--Dynamic load ratings and rating life
|
| GB/T 6445-2007
| 滾動軸承 滾輪滾針軸承 外形尺寸和公差
| ()
|
| GB/T 6930-2002
| 滾動軸承詞匯
| Rolling bearings--Vocabulary
|
| GB/T 7217-2002
| 滾動軸承凸緣外圈向心球軸承凸緣尺寸
| Rolling bearings--Radial ball bearings with flanged outer ring--Flange dimensions
|
| GB/T 7218-1995
| 滾動軸承凸緣外圈微型向心球軸承外形尺寸
| Rolling bearings--Miniature radial ball bearings with flanged outer ring--Boundary dimensions
|
| GB/T 7308-1987
| 滑動軸承薄壁翻邊軸瓦尺寸、公差及檢驗方法
| Plain bearings--Thin-walled flanged half bearings--Dimensions， tolerances and methods of checking
|
| GB/T 7631.4-1989
| 潤滑劑和有關產品(L類)的分類第4 部分:F組 (主軸、軸承和有關離合器)
| Lubricants and related products (class L)--Classification--Part 4:Family F (Spindlebearings，bearings and associated clutches)
|
| GB/T 7809-1995
| 滾動軸承外球面球軸承座外形尺寸
| Roliing bearings--Housings for insertbearing--Boundary dimensions
|
| GB/T 7811-2007
| 滾動軸承 參數符號
| ()
|
| GB/T 7813-1998
| 滾動軸承附件軸承座外形尺寸(1987年版)
| Rolling bearings accessories--Plummer block housings--Boundary dimensions
|
| GB/T 7948-1987
| 塑料軸承極限PV試驗方法
| Test method for PV limit of plastics bearings
|
| GB/T 8597-2003
| 滾動軸承防銹包裝
| Rolling bearings--Rust proof packaging
|
| GB/T 8740-2005
| 鑄造軸承合金錠
| Casting bearing alloy ingots
|
| GB/T 9160.1-2006
| 滾動軸承附件第1部分：錐形襯套
| Rolling bearings―Accessories―Part 1: Tapered sleeves
|
| GB/T 9160.2-2006
| 滾動軸承附件第2部分:鎖緊螺母和鎖緊裝置
| Rolling bearings-Accessories-Part 2:Locknuts and locking devices
|
| GB/T 9161-2001
| 關節軸承桿端關節軸承
| Spherical plain bearings--Spherical plain bearings rod ends
|
| GB/T 9162-2001
| 關節軸承推力關節軸承
| Spherical plain bearings--Thrust spherical plain bearings
|
| GB/T 9163-2001
| 關節軸承向心關節軸承
| Spherical plain bearings--Radial spherical plain bearings
|
| GB/T 9164-2001
| 關節軸承角接觸關節軸承
| Spherical plain bearings--Angular contact radial spherical plain bearings
|
| HG/T 3980-2007
| 汽車軸承用密封圈
| Sealing rings of automobile bearing
|
| JB/T 10650-2006
| 冶金設備用帶座剖分式滾動軸承
| Split rolling bearing with housing for metallurgical equipment
|
| JB/T 10781-2007
| 四螺柱滾動軸承座 型式與尺寸
| 4 Sruds rolling bearings block housings-Types and dimensions
|
| JB/T 4071.1-2007
| 軸承套圈磨床 第1部分：外表面磨床 精度檢驗
| Grinding machines for bearing ring-Part 1: Outer surface grinding machines-Testing of the accuracy
|
| JB/T 4071.2-2007
| 軸承套圈磨床 第2部分：內表面磨床 精度檢驗
| Grinding machines for bearing ring-Part 2: Inner surface grinding machines-Testing of the accuracy
|
| JB/T 4334-2006
| 靜壓空氣軸承透平膨脹機 技術條件
| Technical conditions for static gas bearing turbo expanders
|
| JB/T 5314-2002
| 滾動軸承 振動（加速度）測量方法
| Rolling bearings-Measuring methods for vibration(acceleration)
|
| JB/T 7293－2007
| 內燃機主軸承蓋 螺栓與螺母 技術條件
| Internal combustion engines -Main bearing lid bolts and nuts-Specification
|
| JB/T 9049-2007
| 軋輥油膜軸承
| Oil film bearing for rolling roll
|
| JB/T 9921.2-2007
| 軸承內圈溝超精機和軸承外圈溝超精機 第2部分：技術條件
| Superfinishing machine for groove of bearing inner rings and superfinishing machine for groove of bearing outer rings-Part 2:Specifications |
| YB/T 5144-2006
| 軸承保持器用碳素結構鋼絲
| Carbon structural steel wires for bearing cages
|
| JB/T 1255－2001
| 高碳鉻軸承鋼滾動軸承零件熱處理技術條件
| Specification for heat–treatment of rolling bearing parts made from high carbon chromium steel
|
| 編號 | 中文名稱 | 英文名稱 |
|---|