| 編號 | 中文名稱 | 英文名稱 |
|---|
| DIN 118-1-1977
| 傳動元件.一般機械工程用托架滑動軸承.主要尺寸
| Driving Elements; Pedestal Plain Bearings for General Mechanical Engineering Applications; Main Dimensions
|
| DIN 1495-1-1983
| 小功率電動機和功率小于37瓦的電動機用有滿足特殊要求的燒結金屬制滑動軸承.球面軸承.尺寸
| Sintered metal plain bearings which meet specific requirements for fractional and subfractional horsepower electric motors; Spherical bearings; Dimensions
|
| DIN 1495-2-1983
| 小功率電動機和功率小于37瓦的電動機用有滿足特殊要求的燒結金屬制滑動軸承.圓柱軸承.尺寸
| Sintered metal plain bearings which meet specific requirements for fractional and subfractional horsepower electric motors; Cylindrical bearings; Dimensions
|
| DIN 1495-3-1996
| 小型和微型電機用有特殊要求的燒結金屬制滑動軸承.第3部分:要求和試驗
| Plain bearings of sintered metal with specific requirements for small electrical motors and micro motors - Part 3: Requirements and testing
|
| DIN 1496-1996
| 滑動軸承.SLPG試驗機精密工程軸承的摩擦和磨損測試
| Plain bearings - Testing of friction and wear of precision engineering bearings in the SLPG-Tester
|
| DIN 15049-1958
| 帶有電動葫蘆或類似提升絞車的起重機.帶滑動軸承的軌道輪
| Cranes with electric hoists or similar hoist gear; track wheels with plain bearings
|
| DIN 15050-1958
| 人工操作起重機.帶滾動軸承的軌道輪
| Hand-driven cranes; track wheels with roller bearings
|
| DIN 15057-1978
| 起重機.滾珠和滾柱軸承的蓋.連接尺寸
| Cranes; covers for ball and roller bearings, connecting dimensions
|
| DIN 15062-2-1982
| 起重機.繩輪.軸承和輪轂尺寸
| Cranes; rope pulleys; dimensions of hubs and bearings
|
| DIN 15074-1978
| 起重機..無齒輪帶滑動軸承的起重機凸緣導軌輪
| Cranes; flanged crane rail wheels with plain bearings, without gear wheel
|
| DIN 15075-1977
| 起重機.帶齒輪的裝有關節軸承的有法蘭的起重機軌道輪
| Cranes; flanged crane rail wheels, with plain bearings, with gear wheel
|
| DIN 15076-1977
| 起重機.不帶齒輪的裝有關節軸承的帶輪胎的有法蘭的起重機軌道輪
| Cranes; flanged crane rail wheels with tyre, with plain bearings, without gear wheel
|
| DIN 15077-1977
| 起重機.帶滑動軸承和齒輪的帶輪箍的起重機凸緣導軌輪.
| Cranes; flanged crane rail wheels with tyre, with plain bearings, with gear wheel
|
| DIN 15078-1977
| 起重機.不帶齒輪的裝有滾子軸承的有法蘭的起重機軌道輪
| Cranes; flanged crane rail wheels, with roller bearings, without gear wheel
|
| DIN 15079-1977
| 起重機.帶滾柱軸承和齒輪的起重機帶凸緣導軌輪
| Cranes; flanged crane rail wheels, with roller bearings, with gear wheel
|
| DIN 15080-1977
| 起重機.帶滾柱軸承、無齒輪、帶輪箍的起重機凸緣導軌輪
| Cranes; flanged crane rail wheels with tyre, with roller bearings, without gear wheel
|
| DIN 15081-1977
| 起重機.帶滾柱軸承、齒輪、帶輪箍的起重機帶凸緣導軌輪
| Cranes; flanged crane rail wheels with tyre, with roller bearings, with gear wheel
|
| DIN 15082-2-1977
| 起重機.與大齒輪壓配合的帶滾柱軸承的起重機軌道輪
| Cranes; crane rail wheels with roller bearings, pressed-on gear wheels
|
| DIN 15084-1977
| 起重機.帶滾柱軸承起重機導軌輪.軸承蓋
| Cranes; crane rail wheels with roller bearings, bearing covers
|
| DIN 15086-1977
| 起重機.裝有軸套補償滾子軸承的起重機軌道輪.
| Crane; crane rail wheels with roller bearings, flattening of axle bushes
|
| DIN 15094-1982
| 起重機.主動輪組和從動輪組.軸承罩環
| Cranes; driving wheel units and idler wheel units; bearing cage rings
|
| DIN 15417-1982
| 起重機.下滑車.帶滑動軸承的D型繩索輪
| Cranes; bottom blocks; type D rope pulleys with plain bearings
|
| DIN 15418-1-1982
| 起重機.下滑車.無內套帶深槽滾珠軸承的C型繩輪
| Cranes; bottom blocks; type C rope pulleys with deep groove ball bearing, without internal sleeve
|
| DIN 15418-2-1982
| 起重機的下滑車.無內軸套深滾道滾珠軸承的C型繩索滑輪的間隔套
| Cranes; bottom blocks; spacer sleeves for type C rope pulleys with deep groove ball bearing, without internal sleeve
|
| DIN 15418-3-1982
| 起重機的下滑車.無內軸套深滾道滾珠軸承的C型繩索滑輪的油封蓋
| Cranes; bottom blocks; sealing covers for type C rope pulleys with deep groove ball bearing, without internal sleeve
|
| DIN 15421-1-1982
| 起重機的下滑車.帶深滾道滾珠軸承和內軸套的B型繩索滑輪
| Cranes; bottom blocks; type B rope pulleys with deep groove ball bearing and internal sleeve
|
| DIN 15421-2-1982
| 起重機.下滑車.帶深滾道滾珠軸承和內套筒的B型繩索輪的內軸套和隔離套
| Cranes; bottom blocks; internal sleeves and spacer sleeves for type B rope pulleys with deep groove ball bearing and internal sleeve
|
| DIN 15421-3-1982
| 起重機.下滑車.帶深滾道滾珠軸承和內套筒的B型繩索輪的油封蓋
| Cranes; bottom blocks; sealing covers for type B rope pulleys with deep groove ball bearing and internal sleeve
|
| DIN 15422-1-1982
| 起重機.下滑車.帶圓柱形滾動軸承和內套筒的A型繩索輪
| Cranes; bottom blocks; type A rope pulleys with cylindrical rolling bearing and internal sleeve
|
| DIN 15422-2-1982
| 起重機.下滑車.帶圓柱形滾動軸承和內套筒的A型繩索輪的內軸套和隔離套
| Cranes; bottom blocks; internal sleeves and spacer sleeves for type A rope pulleys with cylindrical rolling bearing and internal sleeve
|
| DIN 15422-3-1982
| 起重機.下滑車.帶圓柱形滾動軸承和內套筒的A型繩索輪的油封蓋
| Cranes; bottom blocks; sealing covers for type A rope pulleys with cylindrical rolling bearing and internal sleeve
|
| DIN 1850-3-1998
| 關節軸承.第3部分.燒結金屬制軸套
| Plain bearings - Part 3: Sintermetal bushes
|
| DIN 1850-4-1998
| 關節軸承.第4部分:人造石墨制軸套
| Plain bearings - Part 4: Artificial carbon bushes
|
| DIN 1850-5-1998
| 關節軸承.第5部分:熱固性塑料制軸套
| Plain bearings - Part 5: Thermoset plastic bushes
|
| DIN 1850-6-1998
| 關節軸承.第6部分:熱塑塑料制軸套
| Plain bearings - Part 6: Thermoplastic bushes
|
| DIN 20553-1989
| 礦山車用帶錐形滾柱軸承的車輪裝置.不帶彈簧
| Wheel sets with taper roller bearings for mine cars; without springs
|
| DIN 20555-1989
| 礦山車用帶錐形滾柱軸承的車輪裝置.外部彈簧懸掛裝置
| Wheel sets with taper roller bearings for mine cars; exterior spring suspension
|
| DIN 20556-1989
| 礦山車用帶錐形滾柱軸承的車輪裝置.內部彈簧懸掛裝置
| Wheel sets with taper roller bearings for mine cars; interior spring suspension
|
| DIN 2083-1-1980
| 第1部分:銑床心軸用和帶縱向鍵槽的銑刀用軸承座套
| Bearing Sleeves for Milling Machine Arbors, for Milling Cutters with Longitudinal Keyway
|
| DIN 24338-2001
| 液壓動力.寬鉸節軸承鉸節頭.尺寸、要求
| Fluid power - Rod end spherical eyes - Dimensions, requirements
|
| DIN 24555-1990
| 流體動力.關節軸承.安裝尺寸
| Fluidpower; spherical plain bearing; mounting dimensions
|
| DIN 25109-1-1990
| 市郊短途鐵路車輛.外置支撐的輪副用軸箱.圓柱形滾柱軸承的全視圖和配置
| Suburban railway vehicles; axle boxes for wheel sets with supports at the outer ends; general view and arrangement for cylindrical roller-bearings
|
| DIN 25109-2-1991
| 郊區鐵路車輛.支座設在外端的車輪組軸箱.第2部分:圓柱滾子軸承用部件
| Suburban railway vehicles; axle boxes for wheel sets with supports at the outer ends; components for cylindrical roller-bearings
|
| DIN 25687-1-2005
| 鐵路車輛部件的術語.發動機和傳動箱用支柱.第1部分:內燃機用的軸承
| Terms for railway vehicle parts - Support for engines and transmissions - Part 1: Bearing for internal combustion engines
|
| DIN 25687-2-2005
| 鐵路車輛部件用術語.發動機和傳動裝置用支架.第2部分:傳動裝置用軸承
| Terms for railway vehicle parts - Support for engines and transmissions - Part 2: Bearing for transmission
|
| DIN 28161-1987
| 攪拌器傳動裝置的要求.旋轉速度和旋轉方向，軸承應用轉動精確度，軸密封環的折卸空間
| Requirements on agitator drives; agitator speed and direction, bearing application running accuracy, dismounting space for shaft seal
|
| DIN 30910-3-2004
| 燒結金屬材料.燒結金屬規范.第3部分:軸承及具有軸承性能的結構件用材料
| Sintered metal materials - Sintered-material specifications - Part 3: Materials for bearings and structural parts with bearing properties
|
| DIN 31651-1-1991
| 滑動軸承.第1部分:分類符號
| Plain bearings; systematic, symbols
|
| DIN 31651-2-1991
| 滑動軸承.第2部分:應用符號
| Plain bearings; application, symbols
|
| DIN 31652-1-1983
| 滑動軸承.設計用于穩定狀態使用的流體動力徑向滑動軸承.圓滾柱軸承的設計
| Plain bearings; hydrodynamic plain journal bearings designed for operation under steady-state conditions; design of circular cylindrical bearings
|
| DIN 31652-2-1983
| 滑動軸承.穩態運行條件下設計用流體動力普通徑向軸承.第2部分:圓柱體軸承設計的必備功能
| Plain bearings; hydrodynamic plain journal bearings designed for operation under steady-state conditions; functions necessary when designing circular cylindrical bearings
|
| DIN 31652-3-1983
| 滑動軸承.設計用于穩定狀態使用的流體動力徑向滑動軸承.圓滾柱軸承設計時需要的使用參數
| Plain bearings; hydrodynamic plain journal bearings designed for operation under steady-state conditions; operational parameters necessary when designing circular cylindrical bearings
|
| DIN 31653-1-1991
| 滑動軸承.穩定工作條件下液壓滑動止推軸承.墊片止推軸承計算
| Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; calculation of pad thrust bearings
|
| DIN 31653-2-1991
| 滑動軸承.穩定工作條件下液壓滑動止推軸承.墊片止推軸承計算函數
| Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; functions for calculation of pad thrust bearings
|
| DIN 31653-3-1991
| 滑動軸承.穩定工作條件液壓滑動止推軸承.墊片止推軸承計算用允許運算參數
| Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; permissible operational parameters for calculation of pad thrust bearings
|
| DIN 31654-1-1991
| 滑動軸承.穩定工作條件下流體動力油膜止推軸承.斜墊止推軸承的計算
| Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; calculation of tilting-pad thrust bearings
|
| DIN 31654-2-1991
| 滑動軸承.穩定工作條件下流體動力油膜止推軸承.斜墊止推軸承運算參數
| Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; functions for calculation of tilting pad thrust bearings
|
| DIN 31654-3-1991
| 滑動軸承.穩定工作條件下液體動力油膜止推軸承.斜墊止推軸承計算用允許運算參數
| Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; permissible operational parameters for calculation of pad thrust bearings
|
| DIN 31655-1-1991
| 滑動軸承.穩定工作條件下液體靜壓向心滑動軸承.不帶排油槽的油潤滑滑動軸承的計算
| Plain bearings; hydrostatic plain journal bearings under steady-state conditions; calculation of oil-lubricated plain bearings without drainage grooves
|
| DIN 31655-2-1991
| 滑動軸承.穩定工作條件下靜壓向心滑動軸承.不帶排油槽的油潤滑滑動軸承計算用特性值
| Plain bearings; hydrostatic plain journal bearings under steady-state conditions; characteristic values for the calculation of oil-lubricated plain bearings without drainage grooves
|
| DIN 31656-1-1991
| 滑動軸承.穩定工作條件下液體靜壓向心滑動軸承.帶排油槽的油潤滑滑動軸承的計算
| Plain bearings; hydrostatic plain journal bearings under steady-state conditions; calculation of oil-lubricated plain bearings with drainage grooves
|
| DIN 31656-2-1991
| 滑動軸承.穩定工作條件下靜壓向心滑動軸承.帶排油槽的油潤滑滑動軸承計算用特性值
| Plain bearings; hydrostatic plain journal bearings under steady-state conditions; characteristic values for the calculation of oil-lubricated plain bearings with drainage grooves
|
| DIN 31657-1-1996
| 滑動軸承.穩定工作狀態液壓徑向滑動軸承.第1部分:多層軸承和斜墊止推滑動軸承計算
| Plain bearings - Hydrodynamic plain journal bearings under steadystate conditions - Part 1: Calculation of multi-lobed and tilting pad journal bearings
|
| DIN 31657-2-1996
| 滑動軸承.穩定工作狀態液壓徑向滑動軸承.第2部分:多層滑動軸承計算函數
| Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 2: Functions for calculation of multilobed journal bearings
|
| DIN 31657-3-1996
| 滑動軸承.穩定工作狀態液壓徑向滑動軸承.第3部分:斜墊止推滑動軸承計算用函數
| Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 3: Functions for calculation of tilting pad journal bearings
|
| DIN 31657-4-1996
| 滑動軸承.穩定工作狀態中液動滑動軸徑軸承.第4部分:計算多瓣和傾斜墊軸徑軸承用可允許的操作參數
| Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 4: Permissible operational parameters for calculation of multi-lobed and tilting pad journal bearings
|
| DIN 31661-1983
| 滑動軸承.術語、特性和更換、損壞的原因
| Plain bearings; terms, characteristics and causes of changes and damages
|
| DIN 31665-1993
| 滑動軸承.軸承金屬的試驗.靜態應力下使用潤滑劑時金屬的耐腐蝕性
| Plain bearings; testing of bearing metals; resistance to corrosion by lubricants and static conditions
|
| DIN 31670-8-1986
| 滑動軸承.滑動軸承的質量保證.第8部分:軸、軸環和推力環的形位公差和表面粗糙度的檢驗
| Plain bearings; quality assurance of plain bearings; checking the geometrical tolerances and surface roughness of shafts, collars, and thrust collars
|
| DIN 31690-1990
| 托架滑動軸承.軸承塊
| Pedestal plain bearings; block plummer
|
| DIN 31692-1-1996
| 滑動軸承.第1部分:潤滑和潤滑監測
| Plain bearings - Part 1: Lubrication and lubrication monitoring
|
| DIN 31692-2-1996
| 滑動軸承.第2部分:溫度監測
| Plain bearings - Part 2: Temperature monitoring
|
| DIN 31692-3-1996
| 滑動軸承.第3部分:振動監測
| Plain bearings - Part 3: Vibration monitoring
|
| DIN 31692-4-1997
| 滑動軸承.第4部分:電氣絕緣
| Plain bearings - Part 4: Electrical insulation
|
| DIN 31692-5-2000
| 滑動軸承.第5部分:油密封性檢驗用檢查表
| Plain bearings - Part 5: Check list for verification of oil tightness
|
| DIN 31693-1990
| 普通關節軸承.普通托架軸承.側面法蘭軸承
| Pedestal plain bearings; side flange bearing
|
| DIN 31694-1990
| 普通關節軸承.普通托架軸承.中心法蘭軸承
| Pedestal plain bearings; centre flange bearings
|
| DIN 31696-1978
| 滑動止推軸承.自位襯墊止推軸承.裝配尺寸
| Plain Thrust Bearings; Pivoted Pad Thrust Bearings; Fitting Dimensions
|
| DIN 31697-1978
| 滑動止推軸承.環形止推軸承.裝配尺寸
| Plain Thrust Bearings; Ring Thrust Bearings; Fitting Dimensions
|
| DIN 31698-1979
| 滑動軸承.配合
| Plain Bearings, Fits
|
| DIN 31699-1986
| 滑動軸承.軸.軸環.止推環.形狀和位置偏差和表面粗糙度
| Plain bearings; shafts, collars, thrust collars; geometrical tolerances and surface roughness
|
| DIN 322-1983
| 關節軸承.一般用途的潤滑浮環
| Plain bearings; loose lubrication rings for general purposes
|
| DIN 38-1983
| 滑動軸承.厚壁復式滑動軸承中的軸承金屬軸瓦填料
| Plain bearings; bearing metal lining for thick-walled multilayer plain bearings
|
| DIN 4000-12 Bb.1-1979
| 滾柱軸承和滾子元件的產品特性圖表
| Tabular lay-outs of article characteristics for roller bearings and roller elements; branch standards suitable for application
|
| DIN 4000-12-1994
| 第12部分:滾動軸承和滾動軸承元件用物品特性表格設計
| Tabular layouts of article characteristics for roller bearings and roller elements
|
| DIN 4000-49-1990
| 第49部分:滑動軸承用物品特性表格設計
| Tabular layouts of article characteristics for plain bearings
|
| DIN 42013-1988
| 小型電動機的球軸承軸向調節用彈簧墊圈
| Spring washers for axial adjustment of ball bearings of small motors
|
| DIN 42672-2-1974
| B3型設計帶滾珠軸承的內冷鼠籠式交流電多相電動機.第2部分:最大的外殼尺寸
| Alternating-current polyphase motors with ventilated enclosures and squirrel-cage, design B3, with ball bearings; maximum envelope dimensions
|
| DIN 42673-2-1983
| IMB3型帶滾動軸承全密封風扇冷卻鼠籠三相感應電機.相關框架尺寸.防爆高安全"E"型輸出功率
| Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 3, with rolling bearings; relationship frame sizes - output ratings for type of protection increased safety "e"
|
| DIN 42673-3-1983
| IMB3型帶滾動軸承全密封風扇冷卻鼠籠三相感應電機.相關框架尺寸.防火外殼"d"型輸出功率
| Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 3, with rolling bearings; relationship frame sizes - output ratings for type of protection flameproof enclosure "d"
|
| DIN 42673-4-1974
| B3型設計帶滾珠軸承的風冷鼠籠式交流電多相電動機.第4部分:最大的外殼尺寸
| Totally-enclosed fan-cooled alternating-current polyphase motors with squirrel-cage, design B3, with ball bearings, maximum envelope dimensions
|
| DIN 42676-2-1974
| B5型設計帶滾珠軸承的內冷鼠籠式交流電多相電動機.第2部分:最大的外殼尺寸
| Alternating-current polyphase motors with ventilated enclosures and squirrel-cage, design B5, with ball bearings; maximum envelope dimensions
|
| DIN 42677-2-1983
| 帶滾動軸承的IM B 5、 IMB10、IMB14型全密封風扇冷卻鼠籠式三相感應電機.相關框架規格－提高防護安全性"E"
| Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 5, IM B 10, IM B 14, with rolling bearings; relationship frame sizes - output ratings for type of protection increased safety "e"
|
| DIN 42677-3-1983
| 帶滾動軸承的IM B 5、 IMB10、IMB14型全密封風扇冷卻鼠籠式三相感應電機.相關框架規格－防火外殼體“d"型的
| Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 5, IM B 10, IM B 14, with rolling bearings; relationship frame sizes - output ratings for type of protection flameproof enclosure "d"
|
| DIN 42677-4-1974
| B5型、B10型、B14型設計帶滾珠軸承的風冷鼠籠式交流電多相電動機.第4部分:B5型、B14型設計的最大外殼尺寸
| Totally enclosed fan-cooled alternating-current polyphase motors with squirrel-cage, design B5, B10, B14, with ball bearings; maximum envelope dimensions for design B5, B14
|
| DIN 42681-1983
| 表面冷卻滑環型間歇運行三相電機.結構型式IMB3.帶滾動軸承.安裝尺寸和功率配置
| Totally enclosed fan-cooled three-phase induction motors with slipring-rotor; type IM B 3, with rolling bearings; mounting dimensions and relationship frame sizes; output ratings for intermittent duty
|
| DIN 42966-1961
| 電氣機械用的連桿式球軸承.公差和徑向間隙
| Ball bearings, conrad type, for electrical machines; tolerances and radial clearance
|
| DIN 43200-2002
| 電動機用滾柱軸承.維護.安裝.潤滑.拆卸.清洗和再使用
| Roller bearings for electrical machines of electric vehicles - Preservation, mounting, lubrications, dismounting, cleaning and reutilization
|
| DIN 502-2004
| 傳動元件.用兩個螺釘緊固的法蘭軸承
| Driving Components - Flange bearings - Fastened with two screws
|
| DIN 50280-1975
| 徑向普通關節軸承的運轉試驗.概述
| Running Test on Radial Plain Bearings; General
|
| DIN 50282-1979
| 滑動軸承.金屬耐磨材料的摩擦特性.重要定義
| Plain Bearings; The Tribological Behaviour of Metallic Antifriction Materials; Significant Definitions
|
| DIN 503-2004
| 傳動元件.用四個螺釘緊固的法蘭軸承
| Driving components - Flange bearings - Fastened with four screws
|
| DIN 504-2004
| 傳動元件.套筒軸承
| Driving components - Eye-type bearings
|
| DIN 505-2004
| 傳動元件.用兩個螺釘緊固的帶蓋軸承和無蓋軸承
| Driving components - Cap bearings, half bearings - Fastening with two screws
|
| DIN 506-2004
| 傳動元件.用四個螺釘緊固的帶蓋軸承和無蓋軸承
| Driving components - Cap-bearings, half bearings - Fastening with four screws
|
| DIN 51819-1-1999
| 潤滑脂檢驗.滾柱軸承試驗儀FE8中的機械-動脂試驗.第1部分:一般工作原理
| Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 1: General working principles
|
| DIN 51819-2-1999
| 潤滑脂檢驗.滾柱軸承試驗儀FE8中的機械-動載荷試驗.第2部分:斜向滾珠軸承或錐形滾柱軸承潤滑脂試驗方法
| Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 2: Test method for lubricating greases, oblique ball bearing or tapered roller bearing
|
| DIN 51819-3-2005
| 潤滑劑的試驗.滾柱軸承試驗儀FE8中的機械-動態試驗.第5部分:軸向滾柱軸承用潤滑油的試驗方法
| Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 3: Test method for lubricating oils, axial cylindrical roller bearing
|
| DIN 51821-1-1988
| 潤滑劑的檢驗.使用 FAG 滾動軸承潤滑脂檢驗機 FE9 試驗.第1部分:一般工作原則
| Testing of lubricants; test using the FAG roller bearing grease testing apparatus FE9; general working principles
|
| DIN 51821-2-1989
| 潤滑劑的檢驗.使用 FAG 滾動軸承潤滑脂檢驗機 FE9 試驗.第2部分:試驗方法 A/1500/6000
| Testing of lubricants; test using the FAG roller bearing grease testing apparatus FE9; test method A/1500/6000
|
| DIN 5401-2002
| 滾動軸承.滾動軸承和一般工業用滾珠
| Rolling bearings - Balls for rolling bearings and general industrial use
|
| DIN 5402-1-1993
| 滾動軸承.滾動軸承零件.圓柱形滾柱
| Rolling bearings; parts of rolling bearings; cylindrical rollers
|
| DIN 5402-3-1993
| 滾動軸承.滾動軸承零件.滾針
| Rolling bearings; rolling bearing components; needle rollers
|
| DIN 5405-1-1993
| 滾動軸承.滾針軸承.第1部分:滾針和保持架組件
| Rolling bearings; needle roller bearings; needle roller and cage assemblies
|
| DIN 5405-2-1993
| 滾動軸承.滾針軸承.推力滾針和保持架組件
| Rolling bearings; needle roller bearings; thrust needle roller and cage assemblies
|
| DIN 5405-3-1993
| 滾動軸承.滾針軸承.推力墊片
| Rolling bearings; needle roller bearings; thrust washers
|
| DIN 5406-1993
| 滾動軸承.鎖緊墊圈.止動鉤安全平墊圈
| Rolling bearings; lockwashers; safety plate, lockclip
|
| DIN 5412-1 Aw.1-1982
| 滾動軸承.單列帶殼體的圓柱形滾柱軸承.第1 AW.1部分:分離式止推墊圈的一般工程選擇
| Rolling bearings; cylindrical roller bearings, single row, with cage; separate thrust collar, a selection for general engineering
|
| DIN 5412-1-2005
| 滾動軸承.短圓柱滾子軸承.第1部分:單排帶保持架、分離式止推環
| Rolling bearings - Cylindrical roller bearings - Part 1: Single row with cage, separate thrust collars
|
| DIN 5412-11-2000
| 滾動軸承.圓柱滾柱軸承.第11部分:鐵路車輛軸箱用單列,帶保持架滾動軸承
| Rolling bearings - Cylindrical roller bearings - Part 11: Single row, with cage, for railway vehicles axle boxes
|
| DIN 5412-4-2000
| 滾動軸承.圓柱滾柱軸承.第2部分:提高精度的雙列,帶保持架的滾動軸承.
| Rolling bearings - Cylindrical roller bearings - Part 4: Double row, with cage, increased accuracy
|
| DIN 5412-9-1982
| 滾動軸承.尺寸系列48和49、雙列、不可分的、滿裝型滾柱軸承
| Rolling bearings; cylindrical roller bearings, double row, full type roller bearings, non separable; dimension series 48 and 49
|
| DIN 5415-1993
| 滾動軸承.轉接套管
| Rolling bearings; adapter sleeves
|
| DIN 5416-1990
| 滾動軸承.退卸套
| Withdrawal sleeves for use with rolling bearings
|
| DIN 5417-1976
| 滾動軸承用緊固零件.帶環槽軸承用擋圈
| Securing Parts for Rolling Bearings; Snap Rings for Bearings with Ring Groove
|
| DIN 5418-1993
| 滾動軸承.安裝尺寸
| Rolling bearings; dimensions for mounting
|
| DIN 5419-1959
| 滾動軸承座用氈墊圈.氈帶和環形槽
| Felt Rings, Felt Strips, Ring Grooves for Rolling Bearing Housings
|
| DIN 5425-1-1984
| 滾動軸承.安裝公差.通用指南
| Rolling bearings; mounting tolerances; general guidelines
|
| DIN 5426-1-1995
| 滾動軸承.滾動軸承的振動噪聲.第1部分:結構載振動噪聲的測量方法
| Rolling bearings - Rolling bearing vibration and noise - Part 1: Methods for measurement of structure-borne noise
|
| DIN 5429-1-2005
| 滾動軸承.組合式滾針軸承.第1部分:止推滾針軸承、止推滾針球軸承
| Rolling bearings - Combined needle roller bearings - Part 1: Needle-thrust roller bearings, needle-thrust ball bearings
|
| DIN 5429-2-2005
| 滾動軸承.組合式滾針軸承.第2部分:滾針角接觸球軸承
| Rolling bearings - Combined needle roller bearings - Part 2: Needle angular contact ball bearings
|
| DIN 5569-1-1997
| 軌道車輛.帶滾柱軸承和密封墊圈的外裝式輪對軸承.第1部分:綜覽和配置
| Rail vehicles - Externally mounted wheelset-bearings with cylindrical roller bearings and labyrinth-gasket - Part 1: Summary and layout
|
| DIN 5569-2-1997
| 軌道車輛.帶滾柱軸承和密封墊圈的外裝式輪對軸承.第2部分:零部件
| Rail vehicles - Externally mounted wheelset-bearings with cylindrical roller bearings and labyrinth-gasket - Part 2: Component parts
|
| DIN 5570-1-1990
| 軌道車輛.帶圓柱滾柱軸承的外裝軸頸滾柱軸承.綜述和設計圖
| Rail vehicles; externally mounted journal roller bearings cylindrical roller bearings; summary and layout
|
| DIN 5570-2-1990
| 軌道車輛.帶圓柱滾柱軸承的外裝軸徑滾柱軸承.零組件
| Rail vehicles; externally mounted journal roller bearings with cylindrical roller bearings; component parts
|
| DIN 5575-1985
| 有軌車輛.托運材料用的裝有外軸承的負載軸.主要尺寸
| Railway vehicles; carrying axles equipped with external bearings for hauled stock; principal dimensions
|
| DIN 611-1990
| 滾動軸承.標準的概要
| Rolling bearings; summary of standards
|
| DIN 615-1993
| 滾動軸承.磁鐵式關節軸承
| Rolling bearings; magneto-type ball bearings
|
| DIN 616-2000
| 滾動軸承.尺寸.一般方案
| Rolling bearings - Dimensions - General plan
|
| DIN 617-1993
| 滾動軸承.帶保持架的滾針軸承.尺寸系列48和49
| Rolling bearings; needle roller bearings with cage; dimensions series 48 and 49
|
| DIN 618-1-1993
| 滾針軸承.帶封頭的軸套、帶保持架的帶封頭的軸套
| Needle roller bearings; drawn cups with open ends, drawn cups with closed end, with cage
|
| DIN 618-2-1993
| 滾針軸承.密封的帶保持架的開端頭拔出套
| Needle roller bearings; drawn cups with open ends with cage, sealed
|
| DIN 620-1-1982
| 滾動軸承.尺寸公差和轉動公差的測量方法
| Rolling bearings; Gauging methods for dimensional and running tolerances
|
| DIN 620-2-1988
| 滾動軸承.滾動軸承公差.徑向軸承公差
| Rolling bearings; tolerances for rolling bearings; tolerances for radial bearings
|
| DIN 620-3-1982
| 滾動軸承.止推軸承的公差
| Rolling bearings; tolerances for thrust bearings
|
| DIN 620-4-2004
| 滾動軸承.滾動軸承公差.第4部分:徑向內間隙
| Rolling bearings - Rolling bearing tolerances - Part 4: Radial internal clearance
|
| DIN 620-6-2004
| 滾動軸承.滾動軸承公差.第6部分:倒棱尺寸極限
| Rolling bearings - Rolling bearing tolerances - Part 6: Chamfer dimension limits
|
| DIN 623-1-1993
| 滾動軸承.基本原理、名稱、標識
| Rolling bearings; fundamental principles; designation, marking
|
| DIN 623-2-2000
| 滾動軸承.基本原理.第2部分:滾動軸承的圖樣畫法
| Rolling bearings - Fundamental principles - Part 2: Graphical representation of rolling bearings
|
| DIN 625-1-1989
| 滾動軸承.單列徑向接觸滾珠軸承
| Rolling bearings; single row radial contact ball bearings
|
| DIN 625-3-1990
| 滾動軸承.雙列向心球軸承
| Rolling bearings; double row radial contact ball bearings
|
| DIN 625-4-1987
| 滾動軸承.帶法蘭外環的接觸槽向心球軸承
| Rolling bearings; radial contact groove ball bearings with flanged outer ring
|
| DIN 626-1-1999
| 滾動軸承.帶球形外表面和增加內環寬度的軸承.第1部分:鑲嵌軸承
| Rolling bearings - Bearings with spherical outside surface and extended inner ring width - Part 1: Insert bearings
|
| DIN 626-2-1999
| 滾動軸承.帶有外球面和加寬內環的軸承.第2部分.軸承箱
| Rolling bearings - Bearings with spherical outside surface and extended inner ring width - Part 2: Housings for insert bearings
|
| DIN 628-1-1993
| 滾動軸承.單列向心推力球軸承
| Rolling bearings; angular contact radial ball bearing, single row
|
| DIN 628-3-1993
| 滾動軸承.帶保持架雙列向心止推球軸承
| Rolling bearings; angular contact ball bearing, double row, with cage
|
| DIN 628-4-1993
| 滾動軸承.單列向心止推球軸承.四點接觸滾動軸承
| Rolling bearings; angular contact radial ball bearing, single row; four-point contact bearing
|
| DIN 628-5-1994
| 滾動軸承.帶間隔滾珠的雙列向心推力球軸承
| Rolling bearings; angular contact radial ball bearing; double row, with spacer balls
|
| DIN 628-6-1999
| 滾動軸承.角接觸徑向球型軸承.第6部分:單列,接觸角15度和25度
| Rolling bearings - Angular contact radial ball bearing - Part 6: Single row, contact angle 15° and 25°
|
| DIN 630-1993
| 滾動軸承.向心滾珠軸承.帶圓柱形和錐形孔的雙列軸承
| Rolling bearings; self aligning ball bearing; double row with cylindrical and tapered bore
|
| DIN 635-1-1987
| 滾動軸承.單列自位滾柱軸承
| Rolling bearings; single-row self-aligning roller bearings
|
| DIN 635-2-1984
| 滾動軸承.雙列球面滾柱軸承
| Rolling bearings; spherical roller bearings, double row
|
| DIN 644-1997
| 線性滾動軸承.線性軸承導軌.尺寸和公差
| Linear rolling bearings - Shaft support rails for linear bearings - Dimensions and tolerances
|
| DIN 645-1-1999
| 滾動軸承.型面軌滾動導軌.第1部分:系列1至3的尺寸
| Rolling bearings - Profile rail rolling guides - Part 1: Dimensions for series 1 to 3
|
| DIN 645-2-1999
| 滾動軸承.型面軌滾導軌.第2部分:系列4的尺寸
| Rolling bearings - Profile rail rolling guides - Part 2: Dimensions for serie 4
|
| DIN 65237-1996
| 航空航天.雙層鋼活塞節軸承.交貨技術條件.對新設計無效
| Aerospace - Spherical plain bearings, steel on steel - Technical specification; inactive for new design
|
| DIN 65298-1988
| 航空航天.旋轉軸用長期潤滑的滾針軸承支承的萬向節.單接點.連接尺寸.負荷.質量
| Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; single joints; connection dimensions, loads, masses
|
| DIN 65299-1988
| 航空航天.旋轉軸用長期潤滑的滾針軸承支承的萬向節.雙萬向軸.連接尺寸.負荷.質量
| Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; double joints; connection dimensions, loads masses
|
| DIN 65300-1988
| 航空航天.旋轉軸用長期潤滑的滾針軸承支承的萬向節.技術規范
| Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; technical specification
|
| DIN 69001-37-1994
| 機床.多軸頭.A和B型軸承法蘭
| Machine tools; multi-spindle heads; bearing flanges types A and B
|
| DIN 69001-51-1981
| 機床.多軸頭.A型軸承套
| Machine tools; Multi-spindle heads; Bearing bushes Type A
|
| DIN 711-1988
| 滾動軸承.單向推力球軸承
| Rolling bearings; single direction thrust ball bearings
|
| DIN 715-1987
| 滾動軸承.雙向推力球軸承
| Rolling bearings; double direction thrust ball bearings
|
| DIN 720 Bb.1-1979
| 滾動軸承.錐形滾柱軸承DIN和ISO的牌號對照表
| Rolling bearings; tapered roller bearings, equivalent list for DIN- and ISO-designations
|
| DIN 720-1979
| 滾動軸承.錐形滾柱軸承
| Rolling Bearings; Tapered Roller Bearings
|
| DIN 722-2005
| 滾動軸承.止推短圓柱滾子軸承.單向
| Rolling bearings - Thrust cylindrical roller bearings - Single direction
|
| DIN 72784-1966
| 汽車盤式刮水器.刮水器軸承軸套
| Windscreen wipers for automobiles; bushing
|
| DIN 728-1991
| 單向非對稱滾子自定心推力軸承
| Single direction self-aligning thrust bearings with asymmetric rollers
|
| DIN 736-1984
| 滾動軸承.直徑系列2帶錐形孔和緊定套的滾動軸承用帶凸臺軸承座
| Rolling bearings; plummer block housings for rolling bearings of diameter series 2 with tapered bore and adapter sleeve
|
| DIN 737-1984
| 滾動軸承.直徑系列3帶錐形孔和緊定套的滾動軸承用帶凸臺軸承座
| Rolling bearings; plummer block housings for rolling bearings of diameter series 3 with tapered bore and adapter sleeve
|
| DIN 738-1984
| 滾動軸承.直徑系列2帶圓柱形孔的滾動軸承用帶凸臺軸承座
| Rolling bearings; plummer block housings for rolling bearings of diameter series 2 with cylindrical bore
|
| DIN 739-1984
| 滾動軸承.直徑系列3帶圓柱形孔的滾動軸承用帶凸臺軸承座
| Rolling bearings; plummer block housings for rolling bearings of diameter series 3 with cylindrical bore
|
| DIN 7473-1983
| 關節軸承.圓柱形孔整體式厚壁多層關節軸承
| Plain bearings; thick-walled multilayer plain bearings with cylindrical bore, undivided
|
| DIN 7474-1983
| 關節軸承.圓柱形孔分離式厚壁多層關節軸承
| Plain bearings; thick-walled multilayer plain bearings with cylindrical bore, divided
|
| DIN 7477-1983
| 關節軸承.厚壁多層關節軸承腔卸荷
| Plain bearings; bore reliefs for thick-walled multilayer plain bearings
|
| DIN 8165-1-1992
| FV型整體軸承銷式輸送機鏈.單股和雙股鏈（不適用于新結構）
| Solid bearing pin type FV conveyor chains; single-strand and double-strand chains (not to be used for new designs)
|
| DIN 8165-2-1992
| FV型整體軸承銷式輸送機鏈.搭接板（不適用于新結構）
| Solid bearing pin type FV conveyor chains; attachment plates (not to be used for new designs)
|
| DIN 8165-3-1992
| FVT型整體軸承銷式厚板輸送機鏈（不適用于新結構）
| Solid bearing pin type FVT conveyor chains with deep plates (not to be used for new designs)
|
| DIN 8221-2004
| 滑動軸承.符合DIN502、DIN503和DIN504的滑動軸承用軸套
| Plain bearings - Bushes for plain bearings according to DIN 502, DIN 503 and DIN 504
|
| DIN 8258-1969
| 精密機器的軸承鉆石.鐘表的覆蓋寶石
| Jewels for fine mechanics; cap jewels for watches
|
| DIN 8261-1972
| 精密機器的軸承鉆石. V形鉆石
| Jewels for fine mechanics; V-jewels
|
| DIN 8263-1969
| 精密機構的軸承寶石.扁平式儀器用覆蓋寶石
| Jewels for fine mechanics; cap jewels for instruments, flat
|
| DIN 8274-1972
| 精密機構的軸承寶石.電度表用凹面寶石
| Jewels for fine mechanics; jewels with concave shape for watthour-meters
|
| DIN 8279-1-1987
| 第1部分:鐘表用扁平軸承套
| Bearing bushes for watches and clocks, flat
|
| DIN 87346-1976
| 人工操作用帶傳輸管道系統的遙控傳動裝置.軸承
| Remote control gear with transmission tubing for manual operation; bearings
|
| DIN 87373-1976
| 人工操作用帶傳輸管道系統的遙控傳動裝置.防水導向軸承
| Remote control gear with transmission tubing for manual operation; leading-through bearings, watertight
|
| DIN 87382-1980
| 手動發射管的遙控裝置.帶可回轉冠齒輪的防水的導向槽軸承
| Remote control gear with transmission tubing for manual operation; leading-trough bearings with crown gear units slewable, watertight
|
| DIN 9015-1-1986
| 航空航天.飛機結構的ISO配合(滾柱軸承的安裝除外)
| Aerospace; ISO-fits for airframe construction (except mounting of roller bearings)
|
| DIN 9015-2-1986
| 航空航天.發動機結構的ISO配合(滾柱軸承的安裝除外)
| Aerospace; ISO-fits for engine construction (except mounting of roller bearings)
|
| DIN 95365-1997
| 彈簧元件.槽軸承.A至K型
| Elastomer mounts - Hat mounts - Types A to K
|
| DIN 95366-1996
| 橡膠-彈簧元件.帶和不帶保險的罐形軸承.A型至G型
| Elastomer mounts - Pot bearings and fail safe pot bearings, types A to G
|
| DIN 981-1993
| 滾動軸承.鎖緊螺母
| Rolling bearings; locknuts
|
| DIN EN 12080-1998
| 鐵道應用.軸箱.滾動軸承
| Railway applications - Axleboxes - Rolling bearings; German version EN 12080:1998
|
| DIN EN 1337-1-2001
| 結構軸承.第1部分:通用設計規則
| Structural bearings - Part 1: General design rules; German version EN 1337-1:2000
|
| DIN EN 1337-10-2003
| 結構軸承.第10部分:檢驗和維修
| Structural bearings - Part 10: Inspection and maintenance; German version EN 1337-10:2003
|
| DIN EN 1337-11-1998
| 建筑業軸承.第11部分:運輸、儲存和安裝
| Structural bearings - Part 11: Transport, storage and installation; German version EN 1337-11:1997
|
| DIN EN 1337-2-2004
| 結構軸承.第2部分:滑動元件
| Structural bearings - Part 2: Sliding elements; German version EN 1337-2:2004
|
| DIN EN 1337-3-2005
| 結構軸承.第3部分:彈性軸承
| Structural bearings - Part 3: Elastomeric bearings; German version EN 1337-3:2005
|
| DIN EN 1337-4-2004
| 結構軸承.第4部分:滾柱軸承
| Structural bearings - Part 4: Roller bearings; German version EN 1337-4:2004
|
| DIN EN 1337-5-2005
| 結構軸承.第5部分:鍋狀軸承
| Structural bearings - Part 5: Pot bearings; German version EN 1337-5:2005
|
| DIN EN 1337-6-2004
| 結構軸承.第6部分:搖桿軸承
| Structural bearings - Part 6: Rocker bearings; German version EN 1337-6:2004
|
| DIN EN 1337-7-2004
| 結構軸承.第7部分:球面和柱面聚四氟乙烯軸承
| Structural bearings - Part 7: Spherical and cylindrical PTFE bearings; German version EN 1337-7:2004
|
| DIN EN 1337-9-1998
| 建筑業軸承.第9部分:防護
| Structural bearings - Part 9: Protection; German version EN 1337-9:1997
|
| DIN EN 2009-1995
| 航空航天.機體用軸承.鋼制剛性單列滾珠軸承.直徑系列 8 和直徑系列 9.尺寸和負載.新設計停止使用; 德文版本
| Aerospace - Bearings-airframe rolling, rigid single row ball bearings in steel; diameter series 8 and 9 - Dimensions and loads; inactive for new design; German version EN 2009:1984
|
| DIN EN 2011-1995
| 航空航天.機體用軸承.耐腐蝕鋼剛性單列滾珠軸承.直徑系列 8 和直徑系列 9.尺寸和負載.新設計停止使用; 德文
| Aerospace - Bearings-airframe rolling, rigid single row ball bearings in corrosion resisting steel; diameter series 8 and 9 - Dimensions and loads; inactive for new design; German version EN 2011:1984
|
| DIN EN 2012-1995
| 航空航天.機體用軸承.鋼制鋼性單列滾珠軸承.直徑系列 0 和直徑系列 2.尺寸和負載.新設計停止使用; 德文版本
| Aerospace - Bearings-airframe rolling, rigid single row ball bearings in steel; diameter series 0 and 2 - Dimensions and loads; inactive for new design; German version EN 2012:1984
|
| DIN EN 2014-1995
| 航空航天.機體用軸承.耐腐蝕鋼剛性單列滾珠軸承.直徑系列 0 和直徑系列 2.尺寸和負載.新設計停止使用; 德文
| Aerospace - Bearings-airframe rolling, rigid single row ball bearings in corrosion resisting steel; diameter series 0 and 2 - Dimensions and loads; inactive for new design; German version EN 2014:1984
|
| DIN EN 2015-1995
| 航空航天.機體用軸承.鋼制雙列自定心滾珠軸承.直徑系列 2.尺寸和負載.新設計停止使用; 德文版本 EN 2015:19
| Aerospace - Bearings-airframe rolling, double row self aligning ball bearings in steel; diameter series 2 - Dimensions and loads; inactive for new design; German version EN 2015:1984
|
| DIN EN 2017-1995
| 航空航天.機體用軸承.耐腐蝕鋼雙列自定心滾珠軸承.直徑系列 2.尺寸和負載.新設計停止使用; 德文版本 EN 201
| Aerospace - Bearings-airframe rolling, double row self aligning ball bearings in corrosion resisting steel; diameter series 2 - Dimensions and loads; inactive for new design; German version EN 2017:1984
|
| DIN EN 2018-1995
| 航空航天.機體用軸承.鋼制單列自定心滾柱軸承.直徑系列 3 和直徑系列 4.尺寸和負載.新設計停止使用; 德文版
| Aerospace - Bearings-airframe rolling, single row self aligning roller bearings in steel; diameter series 3 and 4 - Dimensions and loads; inactive for new design; German version EN 2018:1984
|
| DIN EN 2020-1995
| 航空航天.機體用滾動軸承.耐腐蝕鋼單列自定心滾柱軸承.直徑系列 3 和直徑系列 4.尺寸和負載.新設計停止使用
| Aerospace - Bearings-airframe rolling, single row self aligning roller bearings in corrosion resisting steel; diameter series 3 and 4 - Dimensions and loads; inactive for new design; German version EN 2020:1984
|
| DIN EN 2022-1989
| 航空航天.輕型系列、帶自潤滑內襯的耐蝕鋼制關節軸承.尺寸和負荷
| Aerospace; bearings, spherical plain, in corrosion resisting steel, with self-lubricating liner, light series; dimensions and loads
|
| DIN EN 2023-1989
| 航空航天.公稱系列、帶自潤滑內襯的耐蝕鋼制關節軸承.尺寸和負荷
| Aerospace series; bearings, spherical plain in corrosion resisting steel, with self-lubricating liner, normal series; dimensions and loads
|
| DIN EN 2063-1995
| 航空航天系列.機體用滾動軸承.技術規范.新設計停止使用; 德文版本 EN 2063:1992
| Aeorspace series - Airframe rolling bearings - Technical specification; inactive for new design; German version EN 2063:1992
|
| DIN EN 2064-1992
| 航空航天.帶潤滑襯套的不銹鋼關節軸承.技術規范
| Aerospace series; bearings spherical plain in corrosion resisting steel with self lubricating liner; technical specification; german version EN 2064:1992
|
| DIN EN 2067-1996
| 航空航天系列.帶自動調心球軸承的吊環端頭.交貨技術條件
| Aerospace series - Rod ends with self-aligning ball bearings - Technical specification; German version EN 2067:1996
|
| DIN EN 2068-1996
| 航空航天系列.帶關節軸承和自潤滑涂層的吊環端頭.交貨技術條件
| Aerospace series - Rod ends with self-lubricating, self-aligning bearings - Technical specification; German version EN 2068:1996
|
| DIN EN 2079-1995
| 航空航天系列.儀器和設備用耐蝕鋼帶法蘭的精密滾珠軸承.尺寸和負載; 德文版本 EN 2079:1995
| Aerospace series - Bearings, precision ball, with flange, in corrosion resisting steel, for instruments and equipment - Dimensions and loads; German version EN 2079:1995
|
| DIN EN 2130-2002
| 航空航天系列.儀器和設備用耐腐蝕鋼精密滾珠軸承.技術規范; 德文版本 EN 2130:2001
| Aerospace series - Bearings, precision ball in corrosion resisting steel for instruments and equipment - Technical specification; German version EN 2130:2001
|
| DIN EN 2337-1996
| 航空航天系列.關節軸承.交貨技術條件
| Aerospace series - Spherical plain bearings - Technical specification; German version EN 2337:1996
|
| DIN EN 2356-1989
| 航空航天..耐蝕鋼制滾動軸承的操縱鋼索的帶螺紋叉端頭.尺寸和負荷
| Aerospace series; fork-ends threaded, control cable for rolling bearing in corrosion resisting steel; dimensions and loads
|
| DIN EN 2360-1989
| 航空航天系列.操縱鋼索的不銹鋼滾制滾動軸承的擠壓連接型叉型端部.尺寸和載荷
| Aerospace series; fork-ends for rolling bearings in corrosion resisting steel swaged on type, control cable; dimensions and loads
|
| DIN EN 2498-1991
| 航空航天系列.紋螺桿的自潤滑襯層的自校準關節軸承的可調操縱桿端頭.尺寸和負荷
| Aerospace series; rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank; dimensions and loads
|
| DIN EN 2501-1989
| 航空航天.寬內環的帶自潤滑內襯的耐蝕鋼制關節軸承.尺寸和負荷
| Aerospace series; bearings, spherical plain in corrosion resisting steel, with self-lubricating liners and wide inner ring; dimensions and loads
|
| DIN EN 2584-2002
| 航空航天系列.帶自動潤滑內襯的耐腐蝕鋼制球面滑動軸承.窄系列:室溫下提高的負荷:尺寸和負載; 德文版本 EN
| Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series; Elevated loads at ambient temperature; Dimensions and loads; German version EN 2584:2001
|
| DIN EN 2585-2006
| 航空航天系列.室溫條件下高負荷、寬系列、帶自潤滑襯套的耐蝕鋼關節軸承.尺寸和負載
| Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 2585:2001
|
| DIN EN 2588-1988
| 航空航天.帶組裝導槽的耐蝕鋼制關節軸承.尺寸和負荷
| Aerospace series; bearings-spherical plain in corrosion resisting steel with assembly slot; dimensions and loads
|
| DIN EN 3045-1994
| 航空航天系列.飛機機架滾動軸承.鋼制硬性單排滾珠軸承.直徑系列0和2.縮小的間隙種類.尺寸和荷載
| Aerospace series; bearings, airframe rolling; rigid single row ball bearings in steel; diameter series 0 and 2; reduced clearance category; dimensions and loads; German version EN 3045:1993
|
| DIN EN 3046-1994
| 航空航天系列.飛機機架滾動軸承.鍍鎘鋼制硬性單排滾珠軸承.直徑系列0和2.縮小的間隙種類.尺寸和荷載
| Aerospace series; bearings, airframe rolling; rigid single row ball bearings in steel, cadmium plated; diameter series 0 and 2; reduced clearance category; dimensions and loads; German version EN 3046:1993
|
| DIN EN 3047-1994
| 航空航天系列.飛機機架滾動軸承.耐腐蝕鋼制硬性單排滾珠軸承.直徑系列0和2.縮小的間隙種類.尺寸和荷載
| Aerospace series; bearings, airframe rolling; rigid single row ball bearings in corrosion resisting steel; diameter series 0 and 2; reduced clearance category; dimensions and loads; German version EN 3047:1993
|
| DIN EN 3048-2006
| 航空航天系列.室溫條件下高負荷、輕系列、帶自潤滑襯套的耐蝕鋼關節軸承.尺寸和負載
| Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 3048:2001
|
| DIN EN 3053-1994
| 航空航天系列軸承.機體用滾動軸承.鋼制單列自定心滾柱軸承.尺寸和負載; 德文版本 EN 3053:1994
| Aerospace series; bearings; airframe rolling, single row self-aligning roller bearings in steel; dimensions and loads; German version EN 3053:1994
|
| DIN EN 3054-1994
| 航空航天.機體用軸承.鍍鎘鋼單列自定心滾柱軸承.尺寸和負載; 德文版本 EN 3054:1994
| Aerospace series; bearings; airframe rolling; single row self-aligning roller bearings in steel, cadmium plated; dimensions and loads; German version EN 3054:1994
|
| DIN EN 3055-1994
| 航空航天.機體用滾動軸承.耐腐蝕鋼單列自定心滾柱軸承.尺寸和負載; 德文版本 EN 3055:1994
| Aerospace series; bearings; airframe rolling; single row self-aligning roller bearings in corrosion resisting steel; dimensions and loads; German version EN 3055:1994
|
| DIN EN 3056-1994
| 航空航天系列軸承.機體用軸承.鋼制剛性雙列滾珠軸承.尺寸和負載; 德文版本 EN 3057:1994
| Aerospace series; bearings, airframe rolling, rigid double row ball bearings in steel; dimensions and loads; German version EN 3056:1994
|
| DIN EN 3057-1994
| 航空航天系列軸承.機體用軸承.鍍鎘鋼剛性雙列滾珠軸承.尺寸和負載; 德文版本 EN 3057:1994
| Aerospace series; bearings, airframe rolling, rigid double row ball bearings in steel, cadmium plated; dimensions and loads; German version EN 3057:1994
|
| DIN EN 3058-1994
| 航空航天系列軸承.機體用軸承.耐腐蝕鋼剛性雙列滾珠軸承.尺寸和負載; 德文版本 EN 3058:1994
| Aerospace series; bearings, airframe rolling; rigid double row ball bearings in corrosion resisting steel; dimensions and loads; German version EN 3058:1994
|
| DIN EN 3280-1994
| 航空航天系列.剛性或自定心機體用軸承.技術規范; 德文版本 EN 3280:1994
| Aerospace series; bearings, airframe rolling, rigid or self-aligning; technical specification; German version EN 3280:1994
|
| DIN EN 3281-1994
| 航空航天系列.機體用軸承.鋼制剛性單列滾珠軸承.直徑系列 8 和 直徑系列 9.尺寸和負載; 德文版本 EN 3281:1
| Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 8 and 9; dimensions and loads; German version EN 3281:1994
|
| DIN EN 3282-1994
| 航空航天系列.機體用軸承.鍍鎘鋼剛性單列滾珠軸承.直徑系列 8 和 直徑系列 9.尺寸和負載; 德文版本 EN 3282
| Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 8 and 9; dimensions and loads; German version EN 3282:1994
|
| DIN EN 3283-1994
| 航空航天系列.飛機用滾動軸承.不銹鋼單列滾珠軸承.直徑系列 8 和 直徑系列 9.尺寸和負載; 德文版本 EN 3283
| Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9; dimensions and loads; German version EN 3283:1994
|
| DIN EN 3284-1994
| 航空航天系列.機體用軸承.鋼制單列自定心滾珠軸承.直徑系列 0 和 直徑系列 2.公稱公差范疇.尺寸和負載; 德
| Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2; normal clearance category; dimensions and loads; German version EN 3284:1994
|
| DIN EN 3285-1994
| 航空航天系列.機體用軸承.鍍鎘鋼剛性單列滾珠軸承.直徑系列 0 和直徑系列 2.公稱公差范疇.尺寸和負載; 德文
| Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2; normal clearance category; dimensions and loads; German version EN 3285:1994
|
| DIN EN 3286-1994
| 航空航天系列.機體用軸承.不銹鋼剛性單列滾珠軸承.直徑系列 0 和直徑系列 2.公稱公差范疇.尺寸和負載; 德文
| Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2; normal clearance category; dimensions and loads; German version EN 3286:1994
|
| DIN EN 3287-1994
| 航空航天系列.機體用軸承.鋼制雙列自定心滾珠軸承.直徑系列 2.尺寸和負載; 德文版本 EN 3287:1994
| Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in steel - Diameter series 2; dimensions and load; German version EN 3287:1994
|
| DIN EN 3288-1994
| 航空航天系列.機體用軸承.鍍鎘鋼雙列自定心滾珠軸承.直徑系列 2.尺寸和負載; 德文版本 EN 3288:1994
| Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in steel, cadmium plated - Diameter series 2; dimensions and loads; German version EN 3288:1994
|
| DIN EN 3289-1994
| 航空航天系列.機體用軸承.不銹鋼雙列自定心滾珠軸承.直徑系列 0.尺寸和負載; 德文版本 EN 3289:1994
| Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in corrosion resisting steel - Diameter series 2; dimensions and loads; German version EN 3289:1994
|
| DIN EN 3290-1994
| 航空航天系列.機體用軸承.鋼制單列自定心滾柱軸承.直徑系列 3 和 直徑系列 4.尺寸和負載; 德文版本 EN 3290
| Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in steel - Diameter series 3 and 4; dimensions and loads; German version EN 3290:1994
|
| DIN EN 3291-1994
| 航空航天系列.機體用軸承.鍍鉻鋼單列自定心滾柱軸承.直徑系列 3 和 直徑系列 4.尺寸和負載; 德文版本 EN 32
| Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Diameter series 3 and 4; dimensions and loads; German version EN 3291:1994
|
| DIN EN 3292-1994
| 航空航天系列.機體用軸承.不銹鋼單列自定心滾柱軸承.直徑系列 3 和 直徑系列 4.尺寸和負載; 德文版本 EN 32
| Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Diameter series 3 and 4; dimensions and loads; German version EN 3292:1994
|
| DIN EN 3446-1995
| 航空航天系列.儀器和設備用耐蝕鋼無法蘭的精密滾珠軸承.尺寸和負載; 德文版本 EN 3446:1995
| Aerospace series - Bearings, precision ball, without flange, in corrosion resisting steel, for instruments and equipment - Dimensions and loads; German version EN 3446:1995
|
| DIN EN 3541-1992
| 航空航天.帶螺紋桿的自調節關節軸承的可調控制桿端部.尺寸、力矩、間隙和負荷
| Aerospace series; rod-ends, adjustable, self-aligning ball bearing, with threaded shank; dimensions, torques, clearances and loads; german version EN 3541:1992
|
| DIN EN 733-1995
| 帶軸承座和PN10軸向端口的離心泵.額定功率.主要尺寸、標識系統; 德文版本 EN 733:1995
| End-suction centrifugal pumps, rating 10 bar with bearing bracket - Nominal duty point, main dimensions, designation system; German version EN 733:1995
|
| DIN EN ISO 13846-2001
| 塑料管道系統.熱塑承壓管用端部荷載軸承和無端部荷載軸承組件和連接件.測定水內壓長期密封性的試驗方法
| Plastic piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure (ISO 13846:2000); German version EN ISO 13846:2000
|
| DIN EN ISO 683-17-2000
| 熱處理鋼、合金鋼和易切鋼.第17部分:滾球和滾柱軸承鋼
| Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:1999); German version EN ISO 683-17:1999
|
| DIN ISO 1002-1985
| 滾動軸承.飛機用軸承.特性、外形尺寸.公差.額定靜載荷
| Rolling bearings; airframe bearings; characteristics, boundary dimensions, tolerances, static load ratings
|
| DIN ISO 10285-1994
| 滾動軸承.米制系列套筒式循環滾珠線性運動的軸承
| Rolling bearings; linear motion, recirculating ball, sleeve type; metric series; identical with ISO 10285:1992
|
| DIN ISO 10766-1998
| 液壓流體動力液壓缸.活塞和連桿的矩形截面軸承環的殼體尺寸
| Hydraulic fluid power, cylinders - Housing dimensions for rectangular-section-cut bearing rings for pistons and rods (ISO 10766:1996)
|
| DIN ISO 10792-2-1996
| 航空航天.帶自動潤滑層的耐腐蝕鋼制機身球面滑動軸承.第2部分:英制系列
| Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 2: Inch series; identical with ISO 10792-2:1995
|
| DIN ISO 10792-3-1996
| 航空航天.帶自動潤滑層的耐腐蝕鋼制機身球面滑動軸承.第3部分:交貨技術條件
| Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 3: Technical specification; identical with ISO 10792-3:1995
|
| DIN ISO 1132-1-2001
| 滾動軸承.公差.第1部分:術語和定義
| Rolling bearings - Tolerances - Part 1: Terms and definitions (ISO 1132-1:2000)
|
| DIN ISO 12128-1998
| 滑動軸承.潤滑孔、潤滑槽和潤滑襯套.軸承套的尺寸、類型、命名及應用
| Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes; Identical with ISO 12128:1995
|
| DIN ISO 12132-2000
| 滑動軸承.薄壁軸瓦的質量保證.設計中的失效形式和影響分析（FMEA）
| Plain bearings - Quality assurance of thin-walled half-bearings - Design FMEA (ISO 12132:1999)
|
| DIN ISO 12240-1-1999
| 球面關節軸承.第1部分:球面徑向關節軸承
| Spherical plain bearing - Part 1: Spherical plain radial bearings (ISO 12240-1:1998)
|
| DIN ISO 12240-2-1999
| 球面關節軸承.第2部分:角面接觸徑向關節軸承
| Spherical plain bearing - Part 2: Angular contact spherical plain radial bearings (ISO 12240-2:1998)
|
| DIN ISO 12240-3-1999
| 球面關節軸承.第3部分:止推球面關節軸承
| Spherical plain bearing - Part 3: Thrust spherical plain (ISO 12240-3:1998)
|
| DIN ISO 12240-4-1999
| 球面關節軸承.第4部分:球面關節軸承桿端
| Spherical plain bearing - Part 4: Spherical plain bearing rod ends (ISO 12240-4:1998)
|
| DIN ISO 12301-1995
| 滑動軸承.幾何特性和材料質量特性的質量控制技術和檢驗; 等同采用 ISO 12301:1992
| Plain bearings - Quality control techniques and inspection of geometrical and material quality characteristics; identical with ISO 12301:1992
|
| DIN ISO 12302-1998
| 關節軸承.質量特性.統計過程控制(SPC)
| Plain bearings - Quality characteristics - Statistical process control (SPC) (ISO 12302:1993)
|
| DIN ISO 12303-1998
| 關節軸承.質量特性.機器和工作能力的計算
| Plain bearings - Quality characteristics - Calculation of machine and process capabilities (ISO 12303:1995)
|
| DIN ISO 12306-1998
| 關節軸承.薄壁半軸承和薄壁軸承襯的壁厚度的測量
| Plain bearings - Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes (ISO 12306:1994)
|
| DIN ISO 12307-1-1998
| 滑動軸承.卷制襯套.第1部分:外徑檢驗
| Plain bearings - Wrapped bushes - Part 1: Checking the outside diameter (ISO 12307-1:1994)
|
| DIN ISO 12307-2-2001
| 滑動軸承.卷制襯套檢驗.第2部分:內徑檢驗
| Plain bearings - Checking of wrapped bushes - Part 2: Checking the inside diameter (ISO 12307-2:2000)
|
| DIN ISO 12308-1998
| 滑動軸承.質量保證.樣品類型.定義、應用和試驗
| Plain bearings - Quality assurance - Sample types; definitions, applications and testing (ISO 12308:1994)
|
| DIN ISO 13012-1999
| 滾動軸承.套筒型循環球直線運動球軸承.附件
| Rolling bearings - Linear motion, recirculating ball, sleeve type - Accessories (ISO 13012:1998)
|
| DIN ISO 13778-2000
| 滑動軸承.薄壁軸瓦的質量保證.選配法獲得小間隙
| Plain bearings - Quality assurance of thin-walled half bearings - Selective assembly of bearings to achieve a narrow clearance range (ISO 13778:1999)
|
| DIN ISO 14728-1-2005
| 滾動軸承.線性運動滾動軸承.第1部分:動態負載額定值和額定壽命
| Rolling bearings - Linear motion rolling bearings - Part 1: Dynamic load ratings and rating life (ISO 14728-1:2004)
|
| DIN ISO 14728-2-2005
| 滾動軸承.線性運動滾動軸承.第2部分:靜態負載額定值
| Rolling bearings - Linear motion rolling bearings - Part 2: Static load ratings (ISO 14728-2:2004) |
| DIN ISO 15312-2004
| 滾動軸承.熱速率.計算和系數
| Rolling bearings - Thermal speed rating - Calculation and coefficients (ISO 15312:2003)
|
| DIN ISO 281 Bb.1-2003
| 滾動軸承.動力荷載額定值和額定壽命.壽命修改因素和修改使用壽命額定值的計算
| Rolling bearings - Dynamic load ratings and rating life - Life modification factor a<(Index)DIN> and calculation of the modified rating life
|
| DIN ISO 281 Bb.2-1994
| 滾動軸承.動態承載量和額定壽命.ISO 281/1:1977 的說明注釋; 等同采用 ISO/TR 8646:1985
| Rolling bearings - Dynamic load ratings and rating life - Explanatory notes on ISO 281/1:1977; identical with ISO/TR 8646:1985
|
| DIN ISO 281 Bb.4-2003
| 滾動軸承.動荷載額定值和額定壽命.普通荷載滾動軸承修改基準額定壽命的計算方法
| Rolling bearings - Dynamic load ratings and rating life - Methods for calculation of the modified reference rating life for universally loaded rolling bearings
|
| DIN ISO 281-1993
| 滾動軸承.動態荷載額定值和額定壽命
| Rolling bearings; dynamic load ratings and rating life; identical with ISO 281:1990
|
| DIN ISO 281/A1-2001
| 滾動軸承.動載荷等級和額定壽命.修改件1
| Rolling bearings - Dynamic load ratings and rating life; Amendment A1 (ISO 281:1990/AMD 1:2000)
|
| DIN ISO 281/A2-2001
| 滾動軸承.動載荷值和額定壽命.修改件2:壽命改進因子A(指數XYZ)
| Rolling bearings - Dynamic load ratings and rating life - Life modification factor a<(Index)xyz>; Amendment A2 (ISO 281:1990/AMD 2:2000)
|
| DIN ISO 3547-1-2000
| 滑動軸承.卷制軸套.第1部分：尺寸
| Plain bearings - Wrapped bushes - Part 1: Dimensions (ISO 3547-1:1999)
|
| DIN ISO 3547-2-2000
| 滑動軸承.卷制軸套.第2部分:外徑和內徑試驗數據
| Plain bearings - Wrapped bushes - Part 2: Test data for outside and inside diameter (ISO 3547-2:1999)
|
| DIN ISO 3547-3-2000
| 滑動軸承.卷制軸套.第3部分:潤滑油孔、油槽和油穴
| Plain bearings - Wrapped bushes - Part 3: Lubrication holes, lubrication grooves and lubrication indentations (ISO 3547-3:1999)
|
| DIN ISO 3547-4-2000
| 滑動軸承.卷制軸套.第4部分:材料
| Plain bearings - Wrapped bushes - Part 4: Materials (ISO 3547-4:1999)
|
| DIN ISO 3548-2001
| 滑動軸承.帶或不帶法蘭的薄壁軸瓦.尺寸、公差和檢驗方法
| Plain bearings - Thin-walled half bearings with or without flange - Tolerances, design features and methods of test (ISO 3548:1999)
|
| DIN ISO 355-1978
| 滾動軸承.米制錐形滾柱軸承.外形尺寸和系列代號
| Rolling Bearings; Metric Tapered Roller Bearings, Boundary Dimensions and Series Designations
|
| DIN ISO 4378-1-1999
| 關節軸承.術語、定義和分類.第1部分:設計,軸承材料及其性能
| Plain bearings - Terms, definitions and classification - Part 1: Design, bearing materials and their properties (ISO 4378-1:1997)
|
| DIN ISO 4378-2-1999
| 關節軸承.術語、定義和分類.第2部分:磨擦和磨損
| Plain bearings - Terms, definitions and classification - Part 2: Friction and wear (ISO 4378-2:1983)
|
| DIN ISO 4378-3-1999
| 關節軸承.術語、定義和分類.第3部分:潤滑
| Plain bearings - Terms, definitions and classification - Part 3: Lubrication (ISO 4378-3:1983)
|
| DIN ISO 4378-4-1999
| 關節軸承.術語、定義和分類.第4部分:計算參數及其符號
| Plain bearings - Terms, definitions and classification - Part 4: Calculation parameters and their symbol (ISO 4378-4:1997)
|
| DIN ISO 4379-1995
| 滑動軸承.銅合金襯套; 等同采用 ISO 4379:1993
| Plain bearings - Copper alloy bushes; identical with ISO 4379:1993
|
| DIN ISO 4381-2001
| 滑動軸承.多層滑動軸承用鉛錫鑄造合金
| Plain bearings - Lead and tin casting alloys for multilayer plain bearings (ISO 4381:2000)
|
| DIN ISO 4382-1-1992
| 滑動軸承.銅合金.單層和多層厚壁滑動軸承用鑄銅合金
| Plain bearings; copper alloys; cast copper alloys for solid and multilayer thick-walled plain bearings; identical with ISO 4382-1:1991
|
| DIN ISO 4382-2-1992
| 滑動軸承.單層滑動軸承用鍛造銅合金
| Plain bearings; copper alloys; wrought copper alloys for solid plain bearings; identical with ISO 4382-2:1991
|
| DIN ISO 4383-2001
| 滑動軸承.薄壁滑動軸承用復合材料
| Plain bearings - Multilayer materials for thin-walled plain bearings (ISO 4383:2000)
|
| DIN ISO 4384-1-2001
| 滑動軸承.軸承金屬硬度試驗.第1部分:復合材料
| Plain bearings - Hardness testing of bearing metals - Part 1: Compound materials (ISO 4384-1:2000)
|
| DIN ISO 4384-2-1982
| 滑動軸承.軸承金屬的硬度檢驗.固體材料
| Plain bearings; hardness testing of bearing metals; solid materials
|
| DIN ISO 4386-1-1992
| 滑動軸承.多層金屬滑動軸承.結合強度超聲波無損檢驗
| Plain bearings; metallic multilayer plain bearings; non-destructive ultrasonic testing of bond; identical with ISO 4386-1:1992
|
| DIN ISO 4386-2-1982
| 滑動軸承.多層金屬滑動軸承.第2部分:厚度大于或等于2mm的軸承金屬層的接合處的破壞性試驗
| Plain bearings; metallic multilayer plain bearings; destructive testing of bond for bearing metal layer thicknesses 2 mm
|
| DIN ISO 4386-3-1992
| 滑動軸承.多層金屬滑動軸承.無損滲透檢驗
| Plain bearings; metallic multilayer plain bearings; non-destructive penetrant testing; identical with ISO 4386-3:1992
|
| DIN ISO 5593-1999
| 滾動軸承.詞匯
| Rolling bearings - Vocabulary (ISO 5593:1997)
|
| DIN ISO 6045-1988
| 造船和海上結構.懸臂起重機鵝頸形起重桿的軸承.組件和部件
| Shipbuilding and marine structures; bearings for derrick goosenecks; assemblies and components; identical with ISO 6045, edition 1987
|
| DIN ISO 6279-1979
| 滑動軸承.整體式滑動軸承用鋁合金
| Plain Bearings; Aluminium Alloy for Solid Bearings
|
| DIN ISO 6280-1982
| 關節軸承.薄壁多層關節軸承軸瓦的要求
| Plain bearings; requirements on backings for thick-walled multilayer plain bearings
|
| DIN ISO 6282-1985
| 滑動軸承.金屬薄壁軸瓦.δ0.01極限值的測定.等同采用ISO6282－1983年版本
| Plain bearings; metallic thin-walled half bearings; determination of the <(Index)0,01><(hoch)*>-limit; identical with ISO 6282, edition 1983
|
| DIN ISO 6524-1995
| 滑動軸承.薄壁半軸承.周長檢驗; 等同采用 ISO 6524:1992
| Plain bearings - Thin-walled half-bearings - Checking of peripherical length; identical with ISO 6524:1992
|
| DIN ISO 6525-1986
| 滑動軸承.帶材制環形止推墊圈.尺寸和公差..等同采用 ISO 6525-1986
| Plain bearings; ring type thrust washers made from strip; dimensions and tolerances; identical with ISO 6525, edition 1983
|
| DIN ISO 6526-1986
| 滑動軸承.沖壓雙金屬半圓止推墊圈.特性和公差.等同采用ISO 6526-1983版本
| Plain bearings; pressed bimetallic half thrust washers; features and tolerances; identical with ISO 6526, edition 1983
|
| DIN ISO 6547-1983
| 液壓流體動力.裝有軸承環的活塞密封殼體.尺寸和允公差
| Hydraulic fluid power-cylinder; piston seal housings incorporating bearing rings; dimensions and tolerances
|
| DIN ISO 6691-2001
| 滑動軸承用熱塑性聚合物.分類和命名
| Thermoplastic for plain bearings - Classification and designation (ISO 6691:2000)
|
| DIN ISO 6811-2001
| 球面滑動軸承.術語
| Spherical plain bearings - Vocabulary (ISO 6811:1998)
|
| DIN ISO 7148-1-2001
| 滑動軸承.軸承材料摩擦特性試驗.第1部分:軸承金屬試驗
| Plain bearings - Testing of the tribological behaviour of bearing materials - Part 1: Testing of bearing metals (ISO 7148-1:1999)
|
| DIN ISO 7148-2-2001
| 滑動軸承.軸承材料摩擦特性試驗.第2部分:聚合物軸承材料試驗
| Plain bearings - Testing of the tribological behaviour of bearing materials - Part 2: Testing of polymer-based bearing materials (ISO 7148-2:1999)
|
| DIN ISO 76 Bb.1-1994
| 滾動軸承.靜態承載量.ISO 281/1:1977 的說明注釋; 等同采用 ISO/TR 10657:1991
| Rolling bearings - Static load ratings - Explanatory notes to ISO 76; identical with ISO/TR 10657:1991
|
| DIN ISO 76-1988
| 滾動軸承.靜負荷額定值
| Rolling bearings; static load ratings; identical with ISO 76:1987
|
| DIN ISO 7905-1-1998
| 關節軸承.軸承疲勞強度.第1部分:液體潤滑條件下在試驗臺上的和使用中的關節軸承
| Plain bearings - Bearing fatigue - Part 1: Plain bearings in test rigs and in applications under conditions of hydrodynamic lubrication (ISO 7905-1:1995)
|
| DIN ISO 7905-2-1998
| 關節軸承.軸承疲勞強度.第2部分:用金屬軸承材料圓柱形試樣作試驗
| Plain bearings - Bearing fatigue - Part 2: Test with a cylindrical specimen of a metallic bearing material (ISO 7905-2:1996)
|
| DIN ISO 7905-3-1998
| 關節軸承.軸承疲勞強度.第3部分:金屬?gòu)?fù)合層軸承材料普通帶材的試驗
| Plain bearings - Bearing fatigue - Part 3: Tests on plain strips of a metallic multilayer bearing material (ISO 7905-3:1996)
|
| DIN ISO 7905-4-1998
| 關節軸承.軸承疲勞強度.第4部分:金屬?gòu)?fù)合層軸承材料的軸承品的試驗
| Plain bearings - Bearing fatigue - Part 4: Test on half-bearings of a metallic multilayer bearing material (ISO 7905-4:1996)
|
| DIN ISO 8314-1988
| 造船和海上結構.跨架軸承和導向支承軸承的耳軸件
| Shipbuilding and marine structures; trunnion pieces for span bearings and lead block bearings; identical with ISO 8314, edition 1987
|
| DIN ISO 8826-1-1990
| 技術制圖.滾動軸承.第1部分:通用簡化畫法
| Technical drawings; rolling bearings; part 1: general simplified representation; identical with ISO 8826-1:1989
|
| DIN ISO 8826-2-1995
| 技術制圖.滾動軸承.第2部分:零件簡化畫法
| Technical drawings - Rolling bearings - Part 2: Detailed simplified representation (ISO 8826-2:1994)
|
| DIN V 4141-1-2003
| 結構軸承.第1部分:設計總則
| Structural bearings - Part 1: General design rules
|
| DIN V 4141-13-1994
| 結構軸承.固定裝置和側邊止推軸承.第13部分:設計和建造
| Structural bearings - Restraints and side thrust bearings - Design and construction
|
| DIN VDE 0123-1985
| 通過軌道車輛車軸滾柱軸承的電流流動
| Current flow through axle roller bearings of rail vehicles
|
| 編號 | 中文名稱 | 英文名稱 |
|---|