| 編號 | 中文名稱 | 英文名稱 |
|---|
| ANSI/ASTM A194/A 194M-2001
| 高壓和高溫設備用碳素鋼與合金鋼螺栓和螺母規范
| Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure and High-Temperature Service
|
| ANSI/ASTM A210-1996
| 鍋爐和過熱器用中碳素?zé)o縫鋼管規范
| Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
|
| ANSI/ASTM A321-1996
| 淬火和回火碳素鋼棒規范
| Specification for Steel Bars, Carbon, Quenched and Tempered
|
| ANSI/ASTM A450-1996
| 碳素鋼管、鐵素體合金鋼管及奧氏體合金鋼管規范
| Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes
|
| ANSI/ASTM A500-2001
| 圓鋼與型鋼的冷變形焊接與無縫碳素鋼結構管規范
| Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
|
| ANSI/ASTM A556-1996
| 無縫冷拉碳素鋼給水加熱器管規范
| Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
|
| ANSI/ASTM A668-1996
| 工業用普通碳素鋼和合金鋼鍛件規范
| Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
|
| ANSI/ASTM A709/A 709M-2001
| 橋梁用碳素鋼和高強度低合金結構型鋼、鋼板、鋼棒及調質合金結構鋼棒規范
| Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges
|
| ANSI/ASTM F682a-1982
| 鍛制碳素鋼套管接頭規范
| Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
|
| ANSI/AWWA D100-2005
| 儲水用碳素鋼焊接箱
| Welded Carbon Steel Tanks for Water Storage
|
| ANSI/SAE J1268-1993
| 碳素鋼和合金工字鋼的可淬透性帶
| Hardenability Bands for Carbon and Alloy H Steels
|
| ANSI/SAE J316-1994
| 油回火碳素鋼彈簧鋼絲和彈簧
| Oil Tempered Carbon Steel Spring Wire and Springs
|
| ANSI/SAE J351-1994
| 油回火碳素鋼閥、彈簧鋼絲和彈簧
| Oil Tempered Carbon Steel Valve, Spring Quality Wire, and Springs
|
| ANSI/SAE J403-1994
| SAE碳素鋼的化學成分
| Chemical Compositions of SAE Carbon Steels
|
| ASTM A 1-2000
| 碳素鋼丁字軌的標準規范
| Standard Specification for Carbon Steel Tee Rails
|
| ASTM A 1007-2002
| 鋼絲繩用碳素鋼絲標準規范
| Standard Specification for Carbon Steel Wire for Wire Rope
|
| ASTM A 1020/A 1020M-2002
| 鍋爐、加熱器、熱交換器和冷凝器裝置的熔焊碳素和碳錳鋼管的標準規范
| Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications
|
| ASTM A 1023/A 1023M-2002
| 通用碳素鋼制股絞繩標準規范
| Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes
|
| ASTM A 105/A 105M-2005
| 管道設備用碳素鋼鍛件的標準規范
| Standard Specification for Carbon Steel Forgings for Piping Applications
|
| ASTM A 108-2003
| 冷加工碳素鋼和合金鋼棒材的標準規范
| Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
|
| ASTM A 178/A 178M-2002
| 電阻焊接碳素鋼和碳錳鋼鍋爐和過熱器管的標準規范
| Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
|
| ASTM A 183-2003
| 碳素鋼制軌條螺栓和螺母的標準規范
| Standard Specification for Carbon Steel Track Bolts and Nuts
|
| ASTM A 2-2002
| 平型、帶槽和防護型碳素鋼平底軌道的標準規范
| Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
|
| ASTM A 214/A 214M-1996
| 熱交換器與冷凝器用電阻焊接碳素鋼管的標準規范
| Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
|
| ASTM A 216/A 216M-2004
| 高溫設備用適合于熔焊的碳素鋼鑄件的標準規范
| Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
|
| ASTM A 230/A 230M-2005
| 閥簧級油回火碳素鋼絲的標準規范
| Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
|
| ASTM A 266/A 266Ma-2003
| 壓力容器部件用碳素鋼鍛件標準規范
| Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
|
| ASTM A 27/A 27M-2005
| 通用碳素鋼鑄件的標準規范
| Standard Specification for Steel Castings, Carbon, for General Application
|
| ASTM A 283/A 283M-2003
| 低和中等抗拉強度碳素鋼板標準規范
| Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
|
| ASTM A 285/A 285M-2003
| 壓力容器用低和中等抗拉強度的碳素鋼板的標準規范
| Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
|
| ASTM A 288-1991
| 渦輪發電機磁性定位環用碳素鋼和合金鋼鍛件
| Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
|
| ASTM A 29/A 29M-2005
| 熱鍛碳素鋼棒和合金鋼棒一般要求的標準規范
| Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
|
| ASTM A 290/A 290M-2005
| 減速齒輪用碳素鋼及合金鋼鍛件的標準規范
| Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
|
| ASTM A 291/A 291M-2005
| 小齒輪、齒輪和減速齒輪軸用碳素鋼和合金鋼鍛件的標準規范
| Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
|
| ASTM A 3-2001
| 低、中、高碳素鋼(未經熱處理的)連接桿標準規范
| Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
|
| ASTM A 307-2004
| 抗拉強度為60000PSI的碳素鋼螺栓和螺柱的標準規范
| Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
|
| ASTM A 311/A 311M-2004
| 有機械性能要求的應力消除冷拉制碳素鋼棒的標準規范
| Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
|
| ASTM A 321-1990
| 經淬火和回火的碳素鋼棒
| Steel Bars, Carbon, Quenched and Tempered
|
| ASTM A 334/A 334Ma-2004
| 低溫設備用無縫和焊接碳素和合金鋼管的標準規范
| Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
|
| ASTM A 350/A 350Ma-2004
| 管道部件用要求切口韌性試驗的碳素鋼與低合金鋼鍛件的標準規范
| Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
|
| ASTM A 350/A 350Mc-2000
| 管道部件用要求切口韌性試驗的碳素鋼與低合金鋼鍛件的標準規范
| Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
|
| ASTM A 356/A 356M-2005
| 汽輪機用厚壁碳素鋼、低合金鋼和不銹鋼鑄件的標準規范
| Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
|
| ASTM A 411-2003
| 鍍鋅低碳素鋼鎧裝線的標準規范
| Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
|
| ASTM A 413/A 413M-2001
| 碳素鋼鏈標準規范
| Standard Specification for Carbon Steel Chain
|
| ASTM A 414/A 414M-2006
| 壓力容器用碳素鋼薄板材的標準規范
| Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels
|
| ASTM A 420/A 420M-2006
| 低溫設備用鍛制碳素鋼和合金鋼管道配件的標準規范
| Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
|
| ASTM A 450/A 450Ma-2004
| 碳素鋼管、鐵素體合金鋼管及奧氏體合金鋼管一般要求的標準規范
| Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes
|
| ASTM A 470/A 470M-2005
| 渦輪轉子和軸用經真空處理的碳素鋼和合金鋼鍛件的標準規范
| Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
|
| ASTM A 489-2004
| 碳素鋼吊耳標準規范
| Standard Specification for Carbon Steel Lifting Eyes
|
| ASTM A 49-2001
| 熱處理碳素鋼連接棒材、微合金連接棒材和法蘭連接棒材的標準規范
| Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
|
| ASTM A 498-2004
| 帶整體散熱片的無縫和焊接碳素鋼熱交換器管的標準規范
| Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
|
| ASTM A 499-1989
| 丁字鋼軌軋制碳素鋼條及型材的標準規范
| Standard Specification for Steel Bars and Shapes, Carbon Rolled from "T" Rails
|
| ASTM A 500a-2003
| 圓形與異型冷成型焊接與無縫碳素鋼結構管標準規范
| Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
|
| ASTM A 501-2001
| 熱成型焊接與無縫碳素鋼結構管標準規范
| Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
|
| ASTM A 508/A 508Mb-2005
| 壓力容器用經淬火和回火真空處理的碳素鋼與合金鋼鍛件的標準規范
| Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
|
| ASTM A 512-1996
| 冷拉對縫焊碳素鋼機械管的標準規范
| Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
|
| ASTM A 515/A 515M-2003
| 中溫及高溫壓力容器用碳素鋼板的標準規范
| Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
|
| ASTM A 516/A 516M-2006
| 中溫及低溫壓力容器用碳素鋼板材的標準規范
| Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
|
| ASTM A 519-2003
| 無縫碳素鋼與合金鋼機械管用標準規范
| Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
|
| ASTM A 520-1997
| 符合ISO 鍋爐結構推薦標準規定的高溫用無縫和電阻焊碳素鋼管形產品的補充要求
| Supplementary Requirements for Seamless and Electric-Resistance-Welded Carbon Steel Tubular Products for High-Temperature Service Conforming to ISO Recommendations for Boiler Construction
|
| ASTM A 524-1996
| 常溫和低溫用無縫碳素鋼管的標準規范
| Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
|
| ASTM A 530/A 530Ma-2004
| 專用碳素鋼和合金鋼管一般要求的標準規范
| Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
|
| ASTM A 541/A 541M-2005
| 壓力容器部件用經淬火和回火的碳素鋼及合金鋼鍛件的標準規范
| Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
|
| ASTM A 556/A 556M-1996
| 無縫冷拉碳素鋼給水加熱器管的標準規范
| Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
|
| ASTM A 562/A 562M-2006
| 玻璃或擴散金屬鍍層的壓力容器用錳鈦合金碳素鋼板
| Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
|
| ASTM A 563a-2004
| 碳素鋼與合金鋼螺母標準規范
| Standard Specification for Carbon and Alloy Steel Nuts
|
| ASTM A 573/A 573M-2005
| 增強韌性的結構碳素鋼板的標準規范
| Standard Specification for Structural Carbon Steel Plates of Improved Toughness
|
| ASTM A 575-1996
| 商品級碳素鋼棒(M級)的標準規范
| Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
|
| ASTM A 576-1990
| 特級熱軋?zhí)妓劁摪? | Steel Bars, Carbon, Hot-Wrought, Special Quality
|
| ASTM A 576b-1990
| 特級熱鍛碳素鋼棒標準規范
| Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
|
| ASTM A 609/A 609M-1991
| 碳素鋼,低合金鋼和馬氏體不銹鋼鑄件及其超聲波檢驗
| Castings, Carbon, Low-Alloy and Martensitic Stainless Steel, Ultrasonic Examination Thereof
|
| ASTM A 612/A 612M-2003
| 中溫和低溫壓力容器用高強度碳素鋼板的標準規范
| Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
|
| ASTM A 641/A 641M-2003
| 鍍鋅碳素鋼絲的標準規范
| Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
|
| ASTM A 659/A 659M-1997
| 商業級熱軋?zhí)妓劁摫“搴蛶Р?最大含碳量為0.16%-0.25%)的標準規范
| Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
|
| ASTM A 660-1996
| 高溫用離心鑄造碳素鋼管的標準規范
| Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
|
| ASTM A 663/A 663M-1989
| 商品級碳素鋼棒的機械特性
| tandard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
|
| ASTM A 668/A 668M-2004
| 一般工業用碳素鋼和合金鋼鍛件的標準規范
| Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
|
| ASTM A 675/A 675M-2003
| 高質量熱鍛碳素鋼棒的機械特性標準規范
| Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
|
| ASTM A 678/A 678M-2005
| 淬火和回火的碳素鋼和高強度低合金結構鋼板的標準規范
| Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates
|
| ASTM A 686-1992
| 碳素工具鋼的標準規范
| Standard Specification for Tool Steel, Carbon
|
| ASTM A 689-1997
| 彈簧用碳素鋼及合金鋼棒的標準規范
| Standard Specification for Carbon and Alloy Steel Bars for Springs
|
| ASTM A 691-1998
| 高溫下高壓裝置用電熔焊碳素鋼和合金鋼管的標準規范
| Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
|
| ASTM A 694/A 694M-2003
| 高壓傳輸設備用管法蘭、配件、閥門及零件用碳素鋼及合金鋼鍛件的標準規范
| Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
|
| ASTM A 695-1990
| 流體動力設備專用熱軋?zhí)妓劁摪? | Steel Bars, Carbon, Hot-Wrought, Special Quality for Fluid Power Applications
|
| ASTM A 696a-1990
| 壓力管道部件用特級熱鍛或冷精軋?zhí)妓劁摪魳?biāo)準規范
| Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
|
| ASTM A 707/A 707M-2002
| 低溫設備用鍛制碳素鋼和合金鋼法蘭的標準規范
| Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
|
| ASTM A 727/A 727M-2002
| 具有固定切口韌性的管道部件用碳素鋼鍛件標準規范
| Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
|
| ASTM A 749/A 749M-1997
| 熱軋高強度碳素低合金鋼帶材的標準規范
| Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
|
| ASTM A 758/A 758M-2000
| 具有改進的切口韌性的對縫焊鍛制碳素鋼管配件標準規范
| Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
|
| ASTM A 764-1995
| 機械彈簧用冷拉鍍鋅和按成品尺寸鍍鋅的碳素鋼絲的標準規范
| Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
|
| ASTM A 765/A 765M-2004
| 具有強制性韌性要求的碳素鋼及低合金鋼壓力容器部件鍛件的標準規范
| Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
|
| ASTM A 786/A 786M-2005
| 熱軋制碳素鋼、低合金鋼、高強度低合金鋼及合金鋼樓板的標準規范
| Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
|
| ASTM A 787-2005
| 金屬涂覆電阻焊接碳素鋼機械管道的標準規范
| Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
|
| ASTM A 794-1997
| 商品級冷軋?zhí)妓劁摫“?最高含碳量為0.16%-0.25%)的標準規范
| Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum), Cold-Rolled
|
| ASTM A 805-1993
| 冷軋?zhí)妓劁摫馄骄€的標準規范
| Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
|
| ASTM A 809-2003
| 鋁涂覆(涂鋁的)碳素鋼絲的標準規范
| Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
|
| ASTM A 822/A 822M-2004
| 液壓系統設備用無縫冷拔碳素鋼管的標準規范
| Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
|
| ASTM A 827/A 827M-2002
| 鍛造及類似用途的碳素鋼板的標準規范
| Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications
|
| ASTM A 836/A 836M-2002
| 玻璃襯里的管道系統和壓力容器設備用鈦穩定的碳素鋼鍛件標準規范
| Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
|
| ASTM A 853-2004
| 一般用途的碳素鋼絲的標準規范
| Standard Specification for Steel Wire, Carbon, for General Use
|
| ASTM A 856/A 856M-2003
| 鋅-5%鋁-鈰合金涂覆碳素鋼絲的標準規范
| Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
|
| ASTM A 858/A 858M-2006
| 低溫和腐蝕情況下熱處理碳素鋼配件的標準規范
| Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
|
| ASTM A 915/A 915M-1993
| 化學要求同鍛件類似的碳素鋼和合金鋼的標準規范
| Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
|
| ASTM A 980-1997
| 超高強度冷軋制碳素鋼薄板標準規范
| Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
|
| ASTM C 1179-1991
| 室外加工碳素材料及石墨材料氧化質量損失標準試驗方法
| Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
|
| ASTM E 212-1966
| 用桿對桿技術對碳素鋼及低合金鋼做光譜分析的方法
| Method for Spectrographic Analysis of Carbon and Low-Alloy Steel by the Rod-to-Rod Technique
|
| ASTM E 350-1995
| 碳素鋼、低合金鋼、硅電工鋼、鐵鑄錠和熟鐵化學分析的標準試驗方法
| Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
|
| ASTM E 404-1995
| 用點對面技術測定碳素鋼和低合金鋼中硼含量的光譜測定的測試方法
| Standard Test Method for Spectrographic Determination of Boron In Carbon and Low Alloy Steel by the Point-To-Plane Technique
|
| ASTM F 568M-2004
| 碳素和合金鋼外螺紋米制緊固件標準規范
| Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners
|
| ASTM F 682a-1982
| 鍛制碳素鋼套筒型管聯接器標準規范
| Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
|
| 編號 | 中文名稱 | 英文名稱 |
|---|