| 編號 | 中文名稱 | 英文名稱 |
|---|
| BS 2S 112-1964
| 飛機材料規范.易切削碳素鋼、光亮冷拔棒(40-50噸力/平方英寸;最大直徑或最小斷面尺寸1/2英寸)(主要用于制造
| Specification for aircraft material - Semi-free cutting carbon steel, bright bars for machining (40-50 tonf/sq in: maximum size 1/2 inch diameter or minor sectional dimension) (primarily intended for the manufacture of nuts)
|
| BS 2S 113-1964
| 飛機材料規范.機械制造用40號碳素鋼光亮冷拔棒(45-55噸力/平方英寸;限定等圓斷面1英寸)(主要用于制造螺母)
| Specification for aircraft material - '40' carbon steel bright bars for machining (45-55 tonf/sq in: limiting ruling section 1 inch) (primarily intended for the manufacture of nuts)
|
| BS 2S 116-1964
| 飛機材料規范.機械制造用40號碳素鋼光亮冷棒(55-65噸力/平方英寸;限定等圓斷面1/4英寸)(主要用于制造螺栓)
| Specification for aircraft material - '40' carbon steel bright bars for machining (55-65 tonf/sq in: limiting ruling section 3/4 inch) (primarily intended for the manufacture of machined bolts)
|
| BS 2SP 91-92-1973
| 飛行器用碳素鋼蝸桿傳動夾緊裝置規范
| Specification for carbon steel worm drive clamps for aircraft
|
| BS 2W 12-1989
| 預制鍍鋅碳素鋼絲繩規范(公制和英制系列)
| Specification for preformed zinc coated carbon steel wire rope (metric and inch series)
|
| BS 3146-1-1974
| 金屬熔模鑄造規范.第1部分:碳素鋼與低合金鋼
| Specification for investment castings in metal - Carbon and low alloy steels
|
| BS 3293-1960
| 石油工業用碳素鋼管法蘭(標稱尺寸24英寸以上)規范
| Specification for carbon steel pipe flanges (over 24 inches nominal size) for the petroleum industry
|
| BS 3673-2-1965
| 彈簧固定環規范.第2部分:碳素鋼E 型卡箍
| Specification for spring retaining rings - Carbon steel E clips
|
| BS 3673-3-1968
| 彈簧固定環規范.第3部分:碳素鋼 C型卡箍
| Specification for spring retaining rings - Carbon steel C clips
|
| BS 3673-4-1977
| 彈簧固定環規范.第4部分:米制系列碳素鋼開口簧環
| Specification for spring retaining rings - Carbon steel circlips - metric series
|
| BS 3S 105-1969
| 碳素鋼(僅供鍛造螺栓用的棒材)規范
| Specification for carbon steel (bar for the manufacture of forged bolts only)
|
| BS 405-1987
| 通用未涂覆的板網碳素鋼薄板規范
| Specification for uncoated expanded metal carbon steel sheets for general purposes
|
| BS 4637-1970
| 盤簧(襯墊和底座)用碳素鋼絲規范
| Specification for carbon steel wire for coiled springs (bedding and seating)
|
| BS 4638-1970
| Z形和方形彈簧用碳素鋼絲規范
| Specification for carbon steel wire for zigzag and square-form springs
|
| BS 6043-1.1-2002
| 制鋁工業用碳素材料的取樣與試驗方法.電極用瀝青.取樣
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Sampling - Section 1.1: Sampling
|
| BS 6043-1.10-2000
| 制鋁工業用碳素材料的取樣與試驗方法.電極用瀝青.揮發物含量的測定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of volatile matter content - Section 1.10 Determination of volatile matter content
|
| BS 6043-1.11-2000
| 制鋁工業用碳素材料的取樣與試驗方法.電極用瀝青.喹啉不溶物中C/H原子比的測定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of the atomic C/H ratio of the quinoline-insoluble material - Section 1.11 Determination of the atomic C/H ratio of the quinoline-insoluble material
|
| BS 6043-1.13-2000
| 制鋁工業用碳素材料的取樣與試驗方法.電極用瀝青.硫含量的測定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of sulfur content - Section 1.13 Determination of sulfur content
|
| BS 6043-1.6-1998
| 制鋁工業用碳素材料的取樣與試驗方法.電極用瀝青.焦化值測定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of coking value - Section 1.6 Determination of coking value
|
| BS 6043-2-18-2001
| 制鋁工業用碳素材料的取樣與試驗方法.電極用焦炭.用艾氏卡(Eschlca)法測定總硫量
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of the total sulfur by the Eschka method - Section 2.18 Determination of total sulfur by the Eschka method
|
| BS 6043-2.20.1-2001
| 制鋁工業用碳素材料的取樣與試驗方法.電極用焦炭.煅燒焦炭的羧基反應性.通過質量損失法測定反應性
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Carboxy reactivity of calcined coke - Determination of the reactivity by a loss in mass method - Section 2.20: Carboxy reactivity of calcined coke Subsection 2.20.1: Determination of the reactivity by a loss in mass method
|
| BS 6043-2.21.1-2001
| 鋁生產用碳素材料的取樣和試驗方法.電極用焦炭.煅燒焦炭的空氣反應性.通過灼燒溫度測定反應性
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Air reactivity of calcined coke - Determination of the reactivity by determination of ignition temperature - Section 2.21: Air reactivity of calcined coke Subsection 2.21.1: Determination of the reactivity by determination of ignition temperature
|
| BS 6043-2.4-2000
| 制鋁工業用碳素材料的取樣與試驗方法.電極用焦炭.X射線熒光光譜法分析
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Analysis by X-ray fluorescence spectroscopy - Section 2.4: Analysis by X-ray fluorescence spectroscopy
|
| BS 6043-2.9-2000
| 制鋁工業用碳素材料的取樣與試驗方法.電極用焦炭.粒度分布的測定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of particle size distribution - Section 2.9 Determination of particle size distribution
|
| BS 6043-3.1.1-1999
| 制鋁工業用碳素材料的取樣與試驗方法.電極.取樣.陰極取樣
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Sampling - Sampling of cathodes - Section 3.1 Sampling Subsection 3.1.1 Sampling of cathodes
|
| BS 6043-3.1.2-1999
| 制鋁工業用碳素材料的取樣與試驗方法.電極.取樣.陽極取樣
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Sampling - Sampling of anodes - Section 3.1 Sampling Subsection 3.1.2 Sampling of anodes
|
| BS 6043-3.3-2000
| 制鋁工業用碳素材料的取樣與試驗方法.電極.用尺寸法測定陰極碳?jí)K和預焙陽極的體密度(表觀密度)
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of the bulk density (apparent density) of cathode blocks and prebaked anodes using a dimensions method - Section 3.3 Determination of the bulk density (apparent density) of cathode blocks and prebaked anodes using a dimensions method
|
| BS 6043-3.4-2000
| 制鋁工業用碳素材料的取樣與試驗方法.電極.用靜流法測定陰極碳?jí)K和預焙陽極的開口孔隙率和體密度(表觀密度)
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of the open porosity and bulk density (apparent density) of cathode blocks and prebaked anodes using a hydrostatic method - Section 3.4 Determination of the open porosity and bulk density (apparent density) of cathode blocks and prebaked anodes by a hydrostatic method
|
| BS 6043-3.5.1-2000
| 制鋁工業用碳素材料的取樣與試驗方法.電極.抗彎強度的測定.三點法
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of flexural strength - Three point method - Section 3.5 Determination of flexural strength Subsection 3.5.1 Three point method
|
| BS 6043-3.6-2000
| 制鋁工業用碳素材料的取樣與試驗方法.電極.室溫下陰極碳?jí)K和預焙陽極電阻率的測定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of electrical resistivity of cathode blocks and prebaked anodes at ambient temperature - Section 3.6 Determination of electrical resistivity of cathode blocks and prebaked anodes at ambient temperature
|
| BS 6043-3.8.1-2001
| 制鋁工業用碳素材料的取樣與試驗方法.電極用焦炭.預焙陽極的羧基反應性.通過質量損失法測定反應性
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Carboxy reactivity of prebaked anodes - Determination of the reactivity by a loss in mass method - Sec 3.8 Carboxy reactivity of prebaked anodes Subsec 3.8.1 Determination of the reactivity buy a loss in mass method
|
| BS 6043-4.1-2000
| 制鋁工業用碳素材料的取樣和試驗方法.冷壓糊料.取樣方法
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Methods of sampling - Section 4.1 Methods of sampling
|
| BS 6043-4.10-1991
| 制鋁工業用碳素材料的取樣和試驗方法.第4部分:冷搗糊塊.第10節:熱搗糊塊表觀孔隙率測定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the apparent porosity of baked rammed paste
|
| BS 6043-4.11-1991
| 制鋁工業用碳素材料取樣和試驗方法.第4部分:冷搗糊塊.第11節:烘焙搗糊塊熱膨脹性測定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the thermal expansion of baked rammed paste
|
| BS 6043-4.13-1991
| 制鋁工業用碳素材料取樣和試驗方法.第4部分:冷搗糊塊.第13節:烘焙搗實糊塊灰分測定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of ash of baked rammed paste
|
| BS 6043-4.2-2000
| 制鋁工業用碳素材料的取樣和試驗方法.冷壓糊料.通過喹啉萃取測定有效粘合劑含量和聚焦體含量.聚焦體尺寸分
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the effective binder content and aggregate content by extraction with quinoline; determination of aggregate size distribution - Section 4.2 Determination of effective binder content and aggregate content by extraction with quinoline; determination of aggregate size distribution
|
| BS 6043-4.4-2000
| 制鋁工業用碳素材料的取樣和試驗方法.冷壓糊料.未烘燒糊料的揮發物含量的測定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the volatile matter content of unbaked paste - Section 4.4 Determination of the volatile matter content of unbaked paste
|
| BS 6043-4.5-1991
| 制鋁工業用碳素材料取樣和試驗方法.第4部分:冷搗糊塊.第5節:未烘焙糊塊含水量測定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of water content of unbaked pastes
|
| BS 6043-4.6-1991
| 制鋁工業用碳素材料取樣和試驗方法.第4部分:冷搗糊塊.第6節:未烘焙糊塊最大表觀搗實密度測定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of maximum rammed apparent density of unbaked paste
|
| BS 6043-4.8-1991
| 制鋁工業用碳素材料取樣和試驗方法.第4部分:冷搗糊塊.第8節:烘焙搗實糊塊電阻率測定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of electrical resistivity of baked rammed paste
|
| BS 7S 1-1964
| 飛機材料規范.機械加工用碳素鋼光亮冷拔棒材(35/45噸力/平方英寸.最大直徑或最小斷面尺寸4英寸)
| Specification for aircraft material - Carbon steel bright bars for machining (35/45 tonf/sq in; maximum size, 4 inches diameter or minor sectional dimension)
|
| BS EN 2557-1997
| 碳素纖維預浸織物.單位面積質量測定
| Carbon fibre preimpregnates - Determination of mass per unit area
|
| BS EN 2559-1997
| 碳素纖維預浸織物.樹脂成份,纖維成份以及單位面積纖維質量測定
| Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
|
| BS EN 2561-1995
| 碳素纖維增強的塑料.無向的塑料層壓制品.平行與纖維方向的抗拉試驗
| Carbon fibre reinforced plastics - Undirectional laminates - Tensile test parallel to the fibre direction
|
| BS EN 2562-1997
| 碳素纖維增強塑料.單向?qū)訅核芰?與纖維方向平行的彎曲試驗
| Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction
|
| BS EN ISO 2566-1-1999
| 鋼.伸長值的換算.碳素鋼和低合金鋼
| Steel - Conversion of elongation values - Carbon and low alloy steels
|
| BS HC 1-1973
| 碳素鋼鑄件(500牛頓/平方毫米)規范
| Specification for carbon steel castings (500 N/mm2)
|
| BS ISO 12986-2-2005
| 鋁生產用碳素材料.預焙陽極和陰極碳?jí)K.用四點法測定抗彎強度
| Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Determination of flexural strength by the four-point method
|
| BS ISO 12989-2-2005
| 鋁生產用碳素材料.焙燒陽極和側壁塊.空氣反應性的測定.熱重分析法
| Carbonaceous materials used in the production of aluminium - Baked anodes and sidewall blocks - Determination of the reactivity to air - Thermogravimetric method
|
| BS ISO 3575-2005
| 商品級和沖壓級連續熱鍍鋅碳素鋼薄板
| Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
|
| BS ISO 4999-2006
| 商品級和沖壓和結構級連續熱鍍錫(合金)冷軋?zhí)妓乇′摪? | Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities |
| BS ISO 8005-2006
| 鋁生產用碳素材料.生焦炭和煅燒焦炭.灰分含量的測定
| Carbonaceous materials used in the production of aluminium - Green and calcined coke - Determination of ash content
|
| BS ISO 8007-3-2005
| 鋁生產用碳素材料.單個材料的取樣方案和取樣.側壁塊
| Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Sidewall blocks
|
| BS SP 166-1982
| 航空航天用彈簧限動環規范.碳素鋼開口簧環(米制系列)
| Specification for spring retaining rings for aerospace application: carbon steel circlips (metric series)
|
| 編號 | 中文名稱 | 英文名稱 |
|---|