| 編號 | 中文名稱 | 英文名稱 |
|---|
| DIN 43264-1-1976
| 縮放儀碳素.第1部分:碳素與插口截面
| Pantograph carbons; carbons and socket-sections
|
| DIN 50449-1-1997
| 半導體工藝用材料的檢驗.通過紅外線吸收測定Ⅲ-Ⅴ-連接半導體雜質含量.第1部分:砷化鎵中的碳素
| Testing of materials for semiconductor technology - Determination of impurity content in semiconductors by infrared absorption - Part 1: Carbon in gallium arsenide
|
| DIN 51909-1998
| 碳素材料的試驗.線性熱膨脹系數的測定.固體材料
| Testing of carbon materials - Determination of coefficient of linear thermal expansion - Solid materials
|
| DIN 51910-1997
| 碳素材料檢驗.耐壓強度測定.固體
| Testing of carbon materials - Determination of compressive strength - Solid materials
|
| DIN 51911-1997
| 碳素材料試驗.電流電壓法測定比電阻.固體
| Testing of carbon materials - Determination of specific electrical resistance by the current-voltage method - Solid matters
|
| DIN 51912-1998
| 碳素材料的試驗.氫含量的測定.固體物質
| Testing of carbon materials - Determination of hydrogen content - Solid matters
|
| DIN 51913-2001
| 碳素材料檢驗.使用氦氣比重瓶測定密度.固體材料
| Testing of carbon materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
|
| DIN 51914-1985
| 碳素材料檢驗.抗拉強度測定.固體材料
| Testing of carbon materials; determination of tensile strength; solid matters
|
| DIN 51915-1997
| 碳素材料試驗.諧振法測定動力彈性模數.固體
| Testing of carbon materials - Determination of dynamic moduls of elasticity by the resonance method - Solid materials
|
| DIN 51916-1987
| 碳素材料的試驗.夯實后表觀密度的測定.固體材料
| Testing of carbon materials; determination of apparent density after tamping; solid materials
|
| DIN 51917-2002
| 碳素材料試驗.洛氏硬度試驗.布式硬度試驗方法.固體材料
| Testing of carbonaceous materials - Rockwell hardness test - Ball indentation method; Solid materials
|
| DIN 51925-1996
| 碳素材料試驗.含碳搗實材料試樣的備制和體積密度的測定.固體粘接劑和浸漬劑
| Testing of carbon materials - Preparation of samples of carbonaceous tamping materials and determination of their bulk density - Solid binders and impregnants
|
| DIN 51926-1997
| 碳素材料試驗.通過定量圖像分析測定粘結劑中介晶相含量.粘結劑和浸漬劑
| Testing of carbon materials - Determination of the content of mesophase in binding materials by quantitative image analysis - Binding and impregnating materials
|
| DIN 51937-1994
| 碳素材料檢驗.各向異性度測定.固體材料
| Testing of carbon materials; determination of anisotropy degree; solid materials
|
| DIN 51938-1994
| 碳素材料試驗.通過篩分測定顆粒大小分配.固態物質
| Testing of carbon materials; determination of particle size distribution by sieving; solid matters
|
| DIN 51939-2004
| 碳素材料檢驗.煅燒焦碳中浮動焦碳成分的測定.固體材料
| Testing of carbon materials - Determination of floating coke content in calcined coke - Solid materials
|
| DIN 51940-1992
| 碳素材料的試驗.取樣和樣品制備.固體材料.固定粘接劑和浸漬劑
| Testing of carbon materials; sampling and sample preparation; solid materials, solid binders and impregnants
|
| DIN 51941-1-1994
| 碳素材料的試驗.化學成分的測定.第1部分:分析備制.固體材料.牢固粘接劑和浸漬劑
| Testing of carbon materials - Determination of chemical composition - Part 1: Sample preparation, solid materials, solid binders and impregnants
|
| DIN 51942 Berichtigung 1-2006
| 碳素材料試驗.采用脈沖激勵法測定動態彈性模量.固體材料.DIN 51942-2002-03勘誤
| Testing of carbonaceous materials - Determination of dynamic moduls of elasticity by pulse excitation - Solid materials, Corrigenda to DIN 51942:2002-03
|
| DIN 51944 Berichtigung 1-2006
| 碳素材料的試驗.四點法測定彎曲強度.固體材料.DIN 51944-1999勘誤
| Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials, Corrigenda to DIN 51944:1999-01
|
| DIN 51944-1999
| 碳素材料的試驗.四點法測定彎曲強度.固體材料
| Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
|
| DIN 65147-1-1987
| 航空航天.碳素纖維.碳素纖維長絲織物.尺寸、質量
| Aerospace; carbon fibres; fabric of carbon fibre filament yarn; dimensions, masses
|
| DIN 65564-1992
| 航空航天.增強纖維.用HPLC法對碳素長絲紗、織物和短切原絲的漿成份進行定性測定
| Aerospace; reinforcement fibres; qualitative determination of size constituents of carbon filament yarns, woven fabrics and chopped strands by HPLC
|
| DIN 65565-1992
| 航空航天.增強纖維.用紅外分光法對碳素長絲紗、織物和短切原絲的漿類型進行定性試驗
| Aerospace; reinforcement fibres; qualitative testing of size type of carbon filament yarns, woven fabrics and chopped strands by infrared spectroscopy
|
| DIN 65566-1992
| 航空航天.增強纖維.碳素長絲紗、織物和短切原絲的漿含量的測定
| Aerospace; reinforcement fibres; determination of size content of carbon filament yarns, woven fabrics and chopped strands
|
| DIN 65568-1992
| 航空航天.增強纖維.碳素長絲紗、織物和短切原絲的耐熱氧化性能的測定
| Aerospace; reinforcement fibres; determination of thermal oxidative resistance of carbon filament yarns, woven fabrics and short cuts
|
| DIN EN 13293-2003
| 可運輸?shù)膬馄?壓縮、液化和不溶性氣體用水容量不超過0.5升以及二氧化碳用水容量不超過1升的可反復灌裝可
| Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalised carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide; German version EN 13293:2002
|
| DIN EN 2561-1995
| 航空航天系列.碳素纖維增強塑料.單向塑料層壓制品.纖維方向平行抗拉試驗; 德文版本 EN 2561:1995
| Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction; German version EN 2561:1995
|
| DIN EN 723-1996
| 銅和銅合金.燃燒法測定銅管或管件內表面碳素的方法
| Copper and copper alloys - Combustion method for determination of carbon on the inner surface of copper tubes or fittings; German version EN 723:1996
|
| DIN EN ISO 2566-1-1999
| 鋼.斷裂伸長值的換算.第1部分:碳素鋼和低合金鋼（ISO 2566-1-1999)
| Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984); German version EN ISO 2566-1:1999
|
| DIN ISO 12980-2006
| 鋁生產用碳素材料.電極用生焦和煅燒焦.X射線熒光分析法(ISO 12980-2000)
| Carbonaceous materials used in the production of aluminium - Green coke and calcined coke for electrodes - Analysis using an X-ray fluorescence method (ISO 12980:2000) |
| 編號 | 中文名稱 | 英文名稱 |
|---|