| 編號 | 中文名稱 | 英文名稱 |
|---|
| ANSI A10.9-1997
|
建筑施工和拆除工作.混凝土和圬工作業
|
Construction and Demolition Operations - Concrete and Masonry Work
|
| ANSI/ANS 6.4-1997
|
核動力廠的混凝土輻射屏蔽外殼的核分析和設計導則
|
Concrete Radiation Shielding for Nuclear Power Plants, Guidelines on the Nuclear Analysis and Design of
|
| ANSI/ASAE S261.7-1996
|
非鋼筋混凝土灌溉管系統的設計和安裝
|
Design and Installation of Nonreinforced Concrete Irrigation Pipe Systems
|
| ANSI/ASAE S289.2-1998
|
混凝土滑坡渠道襯砌
|
Concrete Slip-Form Canal Linings
|
| ANSI/ASTM A421/A 421M-1998
|
預應力混凝土用應力消除未涂覆鋼絲規范
|
Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
|
| ANSI/ASTM A615/A 615M-2001
|
鋼筋混凝土用變形及普通鋼坯棒規范
|
Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
|
| ANSI/ASTM A704-1996
|
混凝土加筋用焊接普通鋼棒或鋼桿規范
|
Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
|
| ANSI/ASTM D6783-2005
|
聚合物混凝土管規范
|
Specification for Polymer Concrete Pipe
|
| ANSI/AWS C2.20/C 2.20M-2002
|
鋼筋混凝土的熱噴涂鋅陽極規范
|
Specification for Thermal Spraying Zinc Anodes on Steel Reinforced Concrete
|
| ANSI/AWWA C300-2004
|
水及其他液體用鋼制圓柱形加筋混凝土壓力管
|
Reinforced Concrete Pressure Pipe, Steel Cylinder Type, for Water and Other Liquids
|
| ANSI/AWWA C301-1999
|
水和其他液體用預應力混凝土壓力管.鋼瓶型
|
Prestressed Concrete Pressure Pipe, Steel Cylinder Type, for Water and Other Liquids
|
| ANSI/AWWA C302-2004
|
非圓柱形鋼筋混凝土壓力管
|
Reinforced Concrete Pressure Pipe, Noncylinder Type
|
| ANSI/AWWA C303-2002
|
鋼筒形條繞的混凝土壓力管
|
Concrete Pressure Pipe, Bar-Wrapped, Steel Cylinder Type
|
| ANSI/AWWA C304-1999
|
預應力混凝土筒體管的設計
|
Design of Prestressed Concrete Cylinder Pipe
|
| ANSI/AWWA D110-2004
|
線繞式環形預應力混凝土水箱
|
Wire-Wound, Circular Prestressed Concrete Water Tanks
|
| ANSI/AWWA D115-1995
|
帶有環形預應力鋼筋的環形預應力混凝土水箱標準
|
Standard for Circular Prestressed Concrete Water Tanks with Circumferential Tendons
|
| ANSI/UL 60745-2-12-2005
|
手持式電動工具的安全標準.安全.第2-12部分:混凝土振搗器的特殊要求
|
Standard for Safety for Hand-held Motor-operated Electric Tools - Safety - Part 2-12: Particular Requirements for Concrete Vibrators
|
| ANSI/UL 618-2003
|
混凝土圬工砌筑單元的安全規范
|
Standard for Safety for Concrete Masonry Units
|
| ASME BPVC Section 3 Division 2
|
ASME鍋爐和壓力容器規程.第3節:核設施元部件制造規則.第2分冊.混凝土反應堆容器和外殼標準
|
(ASME Boiler & Pressure Vessel Code - Section 3: Rules for Construction of Nuclear Facility Components; Division 2; Code for Concrete Reactor Vessels and Containments)
|
| ASME N45.2.5-1978
|
核電廠建筑階段結構混凝土,結構鋼,土質和地基的安裝,檢驗以及測試用附加質量保證要求
|
(Supplementary quality assurance requirements for installation, inspection, and testing of structural concrete, structural steel, soils, and foundations during the construction phase of nuclear power p)
|
| ASTM A 1032-2004
|
預應力混凝土管用冷拉鋼絲耐氫脆性的標準試驗方法
|
Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe
|
| ASTM A 1035/A 1035M-2006
|
混凝土加筋用異型和光面低碳鉻鋼筋的標準規范
|
Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
|
| ASTM A 1044/A 1044M-2005
|
混凝土抗剪鋼筋用鋼螺柱組件的標準規范
|
Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
|
| ASTM A 184/A 184M-2006
|
混凝土加筋用變形鋼筋網的標準規范
|
Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement
|
| ASTM A 421/A 421M-2005
|
預應力混凝土用未涂覆的應力消除鋼絲的標準規范
|
Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
|
| ASTM A 496/A 496M-2005
|
混凝土加筋用變形鋼絲的標準規范
|
Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement
|
| ASTM A 497/A 497M-2006
|
混凝土用焊接變形鋼絲加筋的標準規范
|
Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete
|
| ASTM A 648a-2004
|
預應力混凝土管用冷拉鋼絲的標準規范
|
Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe
|
| ASTM A 704/A 704M-2006
|
混凝土加筋用焊接普通鋼棒或桿的鋼筋網的標準規范
|
Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
|
| ASTM A 767/A 767M-2005
|
混凝土加筋用熱浸鍍鋅鋼棒材的標準規范
|
Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
|
| ASTM A 779/A 779M-2005
|
預應力混凝土用應力消除的壓塑未涂覆7股鋼絞線的標準規范
|
Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete
|
| ASTM A 82/A 82Ma-2005
|
混凝土加筋用光面鋼絲的標準規范
|
Standard Specification for Steel Wire, Plain, for Concrete Reinforcement
|
| ASTM A 820/A 820M-2006
|
纖維加筋混凝土用鋼纖維的標準規范
|
Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
|
| ASTM A 821/A 821M-2005
|
預應力混凝土水箱用冷拉鋼絲的標準規范
|
Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Tanks
|
| ASTM A 864/A 864M-1990
|
預應力混凝土軌枕用變形鋼絲
|
Steel Wire, Deformed for Prestressed Concrete Railroad Ties
|
| ASTM A 881/A 881M-2005
|
預應力混凝土鐵路軌枕用應力消除或應力低松弛變形鋼絲的標準規范
|
Standard Specification for Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Prestressed Concrete Railroad Ties
|
| ASTM A 886/A 886M-2005
|
預應力混凝土用應力消除的七股刻痕鋼絲繩標準規范
|
Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
|
| ASTM A 910/A 910M-2005
|
預應力混凝土用未涂覆、未焊接的2股和3股鋼絞線的標準規范
|
Standard Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete
|
| ASTM A 911/A 911M-2005
|
預應力混凝土軌枕用無涂覆應力消除鋼棒的標準規范
|
Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties
|
| ASTM A 944-2005
|
用梁端試樣比較混凝土和鋼筋棒粘結強度的標準試驗方法
|
Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
|
| ASTM A 970/A 970M-2006
|
混凝土鋼筋用有頭鋼棒的標準規范
|
Standard Specification for Headed Steel Bars for Concrete Reinforcement
|
| ASTM A 979/A 979M-2003
|
現場安裝于波紋鋼結構件中的混凝土鋪面和襯里的標準規范
|
Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
|
| ASTM C 1017/C 1017M-2003
|
流動混凝土生產用化學混合物的標準規范
|
Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete
|
| ASTM C 1037-1985
|
公用事業用地下預制混凝土的檢驗的標準實施規程
|
Standard Practice for Inspection of Underground Precast Concrete Utility Structures
|
| ASTM C 1040-2005
|
用核法測定硬化和未硬化混凝土(包括輾實混凝土)實體密度的標準試驗方法
|
Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods
|
| ASTM C 1042-1999
|
使用斜剪切法測定同混凝土一起使用的乳膠粘著強度的測試方法
|
Test Method for Bond Strength of Latex Systems Used with Concrete by Slant Shear
|
| ASTM C 1059-1999
|
硬化混凝土保持新鮮用乳膠作用劑
|
Latex Agents for Bonding Fresh to Hardened Concrete
|
| ASTM C 1064/C 1064M-2005
|
新拌水硬水泥混凝土溫度的標準試驗方法
|
Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
|
| ASTM C 1074-2004
|
用老化法評估混凝土強度的標準規程
|
Standard Practice for Estimating Concrete Strength by the Maturity Method
|
| ASTM C 1078-1987
|
測定新攪拌混凝土中水泥含量的試驗方法
|
Test Methods for Determining the Cement Content of Freshly Mixed Concrete
|
| ASTM C 1079-1987
|
測定新攪拌混凝土中水含量的試驗方法
|
Test Methods for Determining the Water Content of Freshly Mixed Concrete
|
| ASTM C 1084-2002
|
硬化水硬水泥混凝土的硅酸鹽水泥含量的標準試驗方法
|
Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete
|
| ASTM C 1103-2003
|
已安裝的預制混凝土污水管線的接頭驗收試驗的標準規程
|
Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
|
| ASTM C 1103M-2003
|
已安裝的預制混凝土污水管線的接頭驗收標準規程(米制)
|
Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric]
|
| ASTM C 1105-2005
|
由于堿金屬碳酸鹽礦石反應引起混凝土長度變化的標準試驗方法
|
Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
|
| ASTM C 1116-2003
|
纖維增強混凝土及噴漿混凝土的標準規范
|
Standard Specification for Fiber-Reinforced Concrete and Shotcrete
|
| ASTM C 1131-1995
|
混凝土涵洞,雨水溝,排污溝系統的最低成本(使用周期)的標準規范
|
Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
|
| ASTM C 1138M-2005
|
混凝土耐磨性的標準試驗方法(水下法)
|
Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)
|
| ASTM C 1152/C 1152M-2004
|
灰漿和混凝土中酸溶性氯化物含量的標準試驗方法
|
Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete
|
| ASTM C 1159-1998
|
耐化學腐蝕、硬性含硫混凝土用含硫高聚物水泥的標準規范
|
Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete
|
| ASTM C 1176-2005
|
使用振動臺在筒模中制作碾實混凝土的標準實施規范
|
Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
|
| ASTM C 118a-2005
|
灌溉或排水用混凝土管道標準規范
|
Standard Specification for Concrete Pipe for Irrigation or Drainage
|
| ASTM C 118Ma-2005
|
灌溉或排水用混凝土管道標準規范
|
Standard Specification for Concrete Pipe for Irrigation or Drainage [Metric]
|
| ASTM C 1202-2005
|
混凝土耐氯離子滲透能力的電指示的標準試驗方法
|
Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
|
| ASTM C 1209-2005
|
混凝土圬工單位及相關單位的標準術語
|
Standard Terminology of Concrete Masonry Units and Related Units
|
| ASTM C 1213-1992
|
與預制混凝土制品相關的術語
|
Terminology Relating to Precast Concrete Products
|
| ASTM C 1214-2002
|
負壓(真空)試驗法測定混凝土管下水道的標準試驗方法
|
Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
|
| ASTM C 1214M-2002
|
負壓(真空)試驗法測定混凝土管下水道的標準試驗方法(米制)
|
Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method [Metric]
|
| ASTM C 1218/C 1218M-1999
|
砂漿和混凝土中水溶氯化物的試驗方法
|
Test Method for Water-Soluble Chloride in Mortar and Concrete
|
| ASTM C 1227-2005
|
預制混凝土化糞池標準規范
|
Standard Specification for Precast Concrete Septic Tanks
|
| ASTM C 1228-1996
|
玻璃纖維增強混凝土的撓性及沖洗試驗用試樣的制備標準實施規程
|
Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
|
| ASTM C 1229-1994
|
玻璃纖維增強混凝土中玻璃纖維含量測定的標準試驗方法(沖洗試驗)
|
Standard Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test)
|
| ASTM C 1230-1996
|
玻璃纖維增強混凝土焊接區的拉伸性能試驗的標準試驗方法
|
Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
|
| ASTM C 1231/C 1231M-2000
|
測定混凝土筒柱壓強用不粘合蓋板的使用標準規程
|
Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
|
| ASTM C 1244a-2005
|
回填之前利用負壓(真空)試驗的混凝土污水管檢查孔的標準試驗方法
|
Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
|
| ASTM C 1244Ma-2005
|
預回填負壓(真空)試驗法測定混凝土下水道人孔的標準試驗方法(米制)
|
Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill [Metric]
|
| ASTM C 1262a-2005
|
制造混凝土砌塊和相關混凝土構件的凍融耐久性評價的標準試驗方法
|
Standard Test Method for Evaluating the Freeze-Thaw Durability of Manufactured Concrete Masonry Units and Related Concrete Units
|
| ASTM C 129-2005
|
非承重混凝土圬工單位的標準規范
|
Standard Specification for Nonloadbearing Concrete Masonry Units
|
| ASTM C 1319-2001
|
混凝土格子鋪設裝置的標準規范
|
Standard Specification for Concrete Grid Paving Units
|
| ASTM C 1362-2004
|
新拌水凝水泥混凝土流動性的標準試驗方法
|
Standard Test Method for Flow of Freshly Mixed Hydraulic Cement Concrete
|
| ASTM C 1370-2000
|
用于化學穩定的硫聚合物水泥混凝土和化學穩定的其他聚合物混凝土中的集料化學穩定性測定的標準試驗方法
|
Standard Test Method for Determining the Chemical Resistance of Aggregates for Use in Chemical-Resistant Sulfur Polymer Cement Concrete and Other Chemical-Resistant Polymer Concretes
|
| ASTM C 138-2001
|
混凝土的單位重量分析、屈服點及空氣含量測定(重量計算)的標準試驗方法
|
Standard Test Method for Unit Weight, Yield, and Air Content (Gravimetric) of Concrete
|
| ASTM C 138/C 138Ma-2001
|
混凝土的密度(單位重量)、屈服點及空氣含量測定(重量計算)的標準試驗方法
|
Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
|
| ASTM C 1383-2004
|
用沖擊回聲法測量P波速度和混凝土板的厚度的標準試驗方法
|
Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
|
| ASTM C 1385/C 1385M-1998
|
噴漿混凝土材料取樣的標準實施規程
|
Standard Practice for Sampling Materials for Shotcrete
|
| ASTM C 1386-1998
|
預制蒸養加氣混凝土墻建筑部件的標準規范
|
Standard Specification for Precast Autoclaved Aerated Concrete (PAAC) Wall Construction Units
|
| ASTM C 139-2005
|
建造截留井和人孔用混凝土圬工單位的標準規范
|
Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes
|
| ASTM C 1398-1998
|
用吉爾摩水泥稠度試驗針實驗室測定噴漿混凝土用含添加劑的水硬水泥砂漿凝固時間的標準試驗方法
|
Standard Test Method for Laboratory Determination of the Time Setting of Hydraulic-Cement Mortars Containing Additives for Shotcrete by the Use of Gillmore Needles
|
| ASTM C 1399-2004
|
纖維增強混凝土平均剩余強度獲取的試驗方法
|
Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
|
| ASTM C 1404/C 1404M-1998
|
用直接拉力測量與混凝土一起使用的膠粘系統的粘合強度的標準試驗方法
|
Standard Test Method for Bond Strength of Adhesive Systems Used with Concrete as Measured by Direct Tension
|
| ASTM C 140a-2005
|
取樣和檢驗混凝土圬工裝置和相關裝置的標準試驗方法
|
Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
|
| ASTM C 1417-2004
|
直接設計的鋼筋混凝土污水管、雨水管和涵管的生產標準規范
|
Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
|
| ASTM C 1417M-2004
|
直接設計的鋼筋混凝土污水管、雨水管和涵管的生產標準規范(米制)
|
Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
|
| ASTM C 143/C 143Ma-2005
|
水凝水泥混凝土坍落度的標準試驗方法
|
Standard Test Method for Slump of Hydraulic Cement Concrete
|
| ASTM C 1436-1999
|
噴漿混凝土用材料的標準規范
|
Standard Specification for Materials for Shotcrete
|
| ASTM C 1438-1999
|
水硬水泥混凝土和灰漿用乳液和粉末狀聚合物改性劑的標準規范
|
Standard Specification for Latex and Powder Polymer Modifiers for Hydraulic Cement Concrete and Mortar
|
| ASTM C 1439-1999
|
聚合物改性的灰漿和混凝土的標準試驗方法
|
Standard Test Methods for Polymer-Modified Mortar and Concrete
|
| ASTM C 1451-2005
|
測定單一來源混凝土配料勻細度的標準實施規程
|
Standard Practice for Determining Uniformity of Ingredients of Concrete From a Single Source
|
| ASTM C 1452-2000
|
增強的熱壓處理過的加氣混凝土構件的標準規范
|
Standard Specification for Reinforced Autoclaved Aerated Concrete Elements
|
| ASTM C 1478-2006
|
加筋混凝土暴雨排水溝設施、管道和橫向排水溝間的排水溝回彈性連接件的標準規范
|
Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals
|
| ASTM C 1478M-2003
|
加筋混凝土排暴雨污水結構、管道和橫向排水溝間的暴雨排水溝彈性連接件標準規范
|
Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals [Metric]
|
| ASTM C 1479-2001
|
使用標準設備安裝預制混凝土下水道、暴雨下水道和涵管的標準實施規程
|
Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
|
| ASTM C 1480-2000
|
濕或干的噴漿混凝土用封裝的干的預拌的組合材料的標準規范
|
Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application
|
| ASTM C 1491-2003
|
混凝土屋面鋪筑材料的標準規范
|
Standard Specification for Concrete Roof Pavers
|
| ASTM C 1492-2003
|
混凝土屋面瓦的標準規范
|
Standard Specification for Concrete Roof Tile
|
| ASTM C 14a-2005
|
無鋼筋混凝土下水道、暴雨下水道和涵管的標準規范
|
Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
|
| ASTM C 14Ma-2005
|
無鋼筋的混凝土下水道、暴雨下水道和涵管標準規范(米制)
|
Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe [Metric]
|
| ASTM C 1504-2004
|
涵洞和雨水管用預制鋼筋混凝土三邊結構制造的標準規范
|
Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts, Storm Drains
|
| ASTM C 1504M-2004
|
涵洞和雨水管用預制鋼筋混凝土三邊結構制造的標準規范(米制)
|
Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts, Storm Drains (Metric)
|
| ASTM C 1542/C 1542M-2002
|
測量混凝土芯長度的標準試驗方法
|
Standard Test Method for Measuring Length of Concrete Cores
|
| ASTM C 1543-2002
|
利用池塘法測定氯化物滲透到混凝土中的標準試驗方法
|
Standard Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding
|
| ASTM C 1550-2005
|
纖維增強混凝土撓曲韌性的標準試驗方法(利用中心負載圓形板)
|
Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
|
| ASTM C 1552a-2003
|
壓縮試驗用壓蓋混凝土圬工單位、相關元件和圬工棱柱的標準規程
|
Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
|
| ASTM C 1555a-2003
|
高壓蒸養加氣混凝土磚石工程的標準規程
|
Standard Practice for Autoclaved Aerated Concrete Masonry
|
| ASTM C 156-2005
|
混凝土養護材料保水性的標準試驗方法
|
Standard Test Method for Water Retention by Concrete Curing Materials
|
| ASTM C 1568-2005
|
混凝土和粘土屋面瓦抗風性標準試驗方法(機械提升阻力法)
|
Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
|
| ASTM C 1569-2003
|
混凝土和粘土屋面瓦抗風性的標準試驗方法(風洞法)
|
Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Wind Tunnel Method)
|
| ASTM C 1570-2003
|
混凝土和粘土屋面瓦抗風性的標準試驗方法(空氣滲透率法)
|
Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles(Air Permeability Method)
|
| ASTM C 1581-2004
|
測定限制收縮下的灰漿和混凝土斷裂老化和誘導拉伸應力特性的標準試驗方法
|
Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
|
| ASTM C 1582/C 1582M-2004
|
混凝土中鋼筋的氯化感應腐蝕抑制用混合料的標準規范
|
Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete
|
| ASTM C 1583-2004
|
使用直接拉伸(拔出法)測定混凝土表面抗張強度和混凝土維修和覆蓋材料粘結強度或抗張強度的標準試驗方法
|
Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
|
| ASTM C 1585-2004
|
用水硬水泥混凝土測量水吸收率的標準試驗方法
|
Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
|
| ASTM C 1602/C 1602M-2006
|
水硬水泥混凝土生產用拌和水的標準規范
|
Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
|
| ASTM C 1604/C 1604M-2005
|
獲取和檢測噴漿混凝土鉆芯的標準試驗方法
|
Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete
|
| ASTM C 1609/C 1609M-2005
|
纖維增強混凝土的彎曲性能的標準試驗方法(用支梁三點載荷法)
|
Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
|
| ASTM C 1611/C 1611M-2005
|
自動固結混凝土流動性的標準試驗方法
|
Standard Test Method for Slump Flow of Self-Consolidating Concrete
|
| ASTM C 1618-2005
|
使用負氣壓(真空)或正氣壓的混凝土排污管的標準試驗方法
|
Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure
|
| ASTM C 1618M-2005
|
使用負氣壓(真空)和正氣壓的混凝土排污管的標準試驗方法(米制)
|
Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure [Metric]
|
| ASTM C 1619-2005
|
混凝土結構連接用彈性密封件的標準規范
|
Standard Specification for Elastomeric Seals for Joining Concrete Structures
|
| ASTM C 1623-2005
|
混凝土圬工橫楣成品的標準規范
|
Standard Specification for Manufactured Concrete Masonry Lintels
|
| ASTM C 171-2003
|
養護混凝土用薄板材標準規范
|
Standard Specification for Sheet Materials for Curing Concrete
|
| ASTM C 172-2004
|
新攪拌混凝土取樣的標準操作規程
|
Standard Practice for Sampling Freshly Mixed Concrete
|
| ASTM C 173/C 173M-2001
|
用容量分析法測定新澆混合混凝土中空氣含量的標準試驗方法
|
Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
|
| ASTM C 174/C 174M-2006
|
用混凝土鉆心估測混凝土元件厚度的標準試驗方法
|
Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
|
| ASTM C 215-2002
|
混凝土試樣的基本橫向、縱向和扭轉振動頻率的標準試驗方法
|
Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete Specimens
|
| ASTM C 231-2004
|
用壓力法測定新攪拌混凝土中空氣含量的標準試驗方法
|
Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
|
| ASTM C 232-2004
|
混凝土泌水現象的標準試驗方法
|
Standard Test Methods for Bleeding of Concrete
|
| ASTM C 233-2004
|
混凝土引氣劑的標準試驗方法
|
Standard Test Method for Air-Entraining Admixtures for Concrete
|
| ASTM C 267-1997
|
灰漿、薄漿、整塊鋪面石料和聚脂混凝土耐化學侵蝕性的標準試驗方法
|
Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
|
| ASTM C 293-2002
|
混凝土抗彎強度的標準測試方法(用中心點荷載簡支梁法)
|
Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
|
| ASTM C 294-2005
|
混凝土集料成分的標準描述性術語
|
Standard Descriptive Nomenclature for Constituents of Concrete Aggregates
|
| ASTM C 295-2003
|
混凝土用集料的巖相檢驗標準指南
|
Standard Guide for Petrographic Examination of Aggregates for Concrete
|
| ASTM C 311-2005
|
硅酸鹽水泥混凝土中使用的飛灰或天然火山灰的取樣和試驗用標準試驗方法
|
Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
|
| ASTM C 317/C 317M-2000
|
石膏混凝土標準規范
|
Standard Specification for Gypsum Concrete
|
| ASTM C 33-2003
|
混凝土集料標準規范
|
Standard Specification for Concrete Aggregates
|
| ASTM C 330-2005
|
結構混凝土用輕質集料的標準規范
|
Standard Specification for Lightweight Aggregates for Structural Concrete
|
| ASTM C 331-2005
|
混凝土圬工裝置用輕質集料的標準規范
|
Standard Specification for Lightweight Aggregates for Concrete Masonry Units
|
| ASTM C 332-1999
|
隔熱混凝土用輕質集料標準規范
|
Standard Specification for Lightweight Aggregates for Insulating Concrete
|
| ASTM C 360-1992
|
新澆水硬性水泥混凝土中球體貫入的試驗方法
|
Test Method for Ball Penetration in Freshly Mixed Hydraulic Cement Concrete
|
| ASTM C 361-2005
|
鋼筋混凝土低水頭壓力管標準規范
|
Standard Specification for Reinforced Concrete Low-Head Pressure Pipe
|
| ASTM C 361M-2005
|
鋼筋混凝土低水頭壓力管的標準規范(米制)
|
Standard Specification for Reinforced Concrete Low-Head Pressure Pipe [Metric]
|
| ASTM C 39/C 39M-2005
|
圓柱形混凝土試樣的抗壓強度的標準試驗方法
|
Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
|
| ASTM C 40-2004
|
混凝土用細集料中有機雜質含量的標準試驗方法
|
Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
|
| ASTM C 403/C 403M-2005
|
由抗穿透性測定混凝土混合料凝固時間的標準試驗方法
|
Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
|
| ASTM C 412a-2005
|
混凝土排水瓦管的標準規范
|
Standard Specification for Concrete Drain Tile
|
| ASTM C 412Ma-2005
|
混凝土排水瓦管的標準規范(米制)
|
Standard Specification for Concrete Drain Tile [Metric]
|
| ASTM C 413-2001
|
耐化學侵蝕的灰漿、薄漿、整塊鋪面石料和聚酯混凝土吸收性的標準試驗方法
|
Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
|
| ASTM C 418-2005
|
用噴砂法測定混凝土抗磨性的標準試驗方法
|
Standard Test Method for Abrasion Resistance of Concrete by Sandblasting
|
| ASTM C 42/C 42M-2004
|
獲取和測試有孔混凝土和鋸切成的混凝土梁的標準試驗方法
|
Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
|
| ASTM C 426-2005
|
混凝土砌塊線性干燥收縮度的標準試驗方法
|
Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
|
| ASTM C 441-2005
|
在防止因堿硅石集料反應引起混凝土過度膨脹中火山灰或磨碎高爐渣效能的標準試驗方法
|
Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
|
| ASTM C 443a-2005
|
使用橡膠墊圈的混凝土管和人孔用連接件的標準規范
|
Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
|
| ASTM C 443Ma-2005
|
使用橡膠墊圈的混凝土管和人孔用連接件的標準規范(米制)
|
Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets [Metric]
|
| ASTM C 444-2003
|
多孔混凝土管標準規范
|
Standard Specification for Perforated Concrete Pipe
|
| ASTM C 444M-2003
|
多孔混凝土管(米制)標準規范
|
Standard Specification for Perforated Concrete Pipe [Metric]
|
| ASTM C 457-2006
|
顯微法測定硬化混凝土中孔隙系統參數的標準試驗方法
|
Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
|
| ASTM C 469-2002
|
混凝土在壓縮中靜態彈性模量及泊松比的標準測試方法
|
Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
|
| ASTM C 470/C 470Ma-2002
|
混凝土試驗用垂直圓柱體鑄模標準規范
|
Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
|
| ASTM C 472-1999
|
石膏、石膏灰泥和石膏混凝土的標準物理試驗方法
|
Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete
|
| ASTM C 490-2004
|
水凝水泥漿、灰泥和混凝土長度變化測量儀器使用的標準實施規程
|
Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
|
| ASTM C 494-1999
|
混凝土用化學添加劑
|
Chemical Admixtures for Concrete
|
| ASTM C 494/C 494Ma-2005
|
混凝土用化學混合物的標準規范
|
Standard Specification for Chemical Admixtures for Concrete
|
| ASTM C 495a-1999
|
輕質隔熱混凝土抗壓強度的標準試驗方法
|
Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
|
| ASTM C 496/C 496M-2004
|
圓柱形混凝土試樣的分裂拉伸強度的標準試驗方法
|
Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
|
| ASTM C 497-2005
|
混凝土管、人孔構件或瓦管的標準試驗方法
|
Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile
|
| ASTM C 497M-2005
|
混凝土管、人孔構件或瓦管的標準試驗方法(米制)
|
Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile [Metric]
|
| ASTM C 505a-2005
|
帶橡膠墊圈接頭的無鋼筋混凝土灌溉水管的標準規范
|
Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
|
| ASTM C 505Ma-2005
|
帶橡膠墊圈接頭的無鋼筋混凝土灌溉水管標準規范(米制)
|
Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints [Metric]
|
| ASTM C 506a-2005
|
鋼筋混凝土制拱形排水管、雨水管和污水管的標準規范
|
Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
|
| ASTM C 506Ma-2005
|
鋼筋混凝土制拱形排水管、雨水管和污水管的標準規范(米制)
|
Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe [Metric]
|
| ASTM C 507a-2005
|
鋼筋混凝土制橢圓形排水管、雨水管和污水管的標準規范
|
Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
|
| ASTM C 507Mb-2005
|
鋼筋混凝土制橢圓形排水管、雨水管和污水管的標準規范(米制)
|
Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe [Metric]
|
| ASTM C 511-2005
|
水硬水泥和混凝土試驗用攪拌室、濕氣箱、濕氣室和水貯存罐標準規范
|
Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
|
| ASTM C 512-2002
|
壓縮過程中混凝土蠕變的標準試驗方法
|
Standard Test Method for Creep of Concrete in Compression
|
| ASTM C 531-2000
|
耐化學腐蝕的灰漿、薄漿、整體面層和聚合物混凝土的熱膨脹系數和線收縮性的標準試驗方法
|
Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
|
| ASTM C 55-2003
|
混凝土磚標準規范
|
Standard Specification for Concrete Brick
|
| ASTM C 567a-2005
|
測定建筑輕質混凝土密度的標準試驗方法
|
Standard Test Method for Determining Density of Structural Lightweight Concrete
|
| ASTM C 579-1996
|
耐化學腐蝕的灰漿、薄漿及整體面層和聚脂混凝土的抗壓強度的標準試驗方法
|
Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings and Polymer Concretes
|
| ASTM C 580-2002
|
耐化學侵蝕的灰漿、簿漿及整體面層和聚脂混凝土的撓性強度和彈性模數的標準測試方法
|
Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
|
| ASTM C 586-2005
|
用作混凝土集料的碳酸鹽巖石潛在堿活性的標準試驗方法(巖石柱法)
|
Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)
|
| ASTM C 597-2002
|
對通過混凝土的脈沖速度的標準試驗方法
|
Standard Test Method for Pulse Velocity Through Concrete
|
| ASTM C 617-1998
|
壓頂圓柱型混凝土試樣標準實施規程
|
Standard Practice for Capping Cylindrical Concrete Specimens
|
| ASTM C 618-2005
|
混凝土中使用的煤飛灰和未處理的或煅燒的天然火山灰的標準規范
|
Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
|
| ASTM C 637a-1998
|
防輻射混凝土用集料的標準規范
|
Standard Specification for Aggregates for Radiation-Shielding Concrete
|
| ASTM C 638-1992
|
防輻射混凝土集料組分的標準描述命名法
|
Standard Descriptive Nonmenclature of Constituents of Aggregates for Radiation-Shielding Concrete
|
| ASTM C 641-1998
|
輕質混凝土集料中著色材料的標準試驗方法
|
Standard Test Method for Staining Materials in Lightweight Concrete Aggregates
|
| ASTM C 654a-2005
|
多孔混凝土管標準規范
|
Standard Specification for Porous Concrete Pipe
|
| ASTM C 654Ma-2005
|
多孔混凝土管標準規范(米制)
|
Standard Specification for Porous Concrete Pipe [Metric]
|
| ASTM C 655-2004
|
鋼筋混凝土D型承重涵管、雨水管和污水管的標準規范
|
Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
|
| ASTM C 655M-2004
|
鋼筋混凝土D型承重涵管、雨水管和污水管的標準規范(米制)
|
Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe [Metric]
|
| ASTM C 666/C 666M-2003
|
混凝土耐快速凍融的標準試驗方法
|
Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing
|
| ASTM C 672/C 672M-2003
|
暴露于防凍化學藥品的混凝土表面抗蝕刻性的標準試驗方法
|
Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
|
| ASTM C 684-1999
|
混凝土壓力試樣的制作、快速養護和測試的標準試驗方法
|
Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens
|
| ASTM C 685/C 685M-2001
|
容積式分批制和連續混合制混凝土標準規范
|
Standard Specification for Concrete Made By Volumetric Batching and Continuous Mixing
|
| ASTM C 744-2005
|
預制混凝土及硅酸鈣砌塊的標準規范
|
Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units
|
| ASTM C 76b-2005
|
鋼筋混凝土制下水道、雨水管和物水管的標準規范
|
Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
|
| ASTM C 76Mb-2005
|
鋼筋混凝土制涵管、雨水管和污水管的標準規范（米制）
|
Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe [Metric]
|
| ASTM C 779/C 779M-2005
|
混凝土水平面耐磨性的標準試驗方法
|
Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces
|
| ASTM C 78-2002
|
混凝土抗彎強度的標準測試方法(用三點荷載簡支梁法)
|
Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
|
| ASTM C 780-2006
|
普通及鋼筋混凝土砌塊用灰漿的預施工及施工評定標準試驗方法
|
Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
|
| ASTM C 796-2004
|
使用預制發泡材料生產泡沫混凝土用發泡劑的標準試驗方法
|
Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
|
| ASTM C 805-2002
|
硬化混凝土的回彈指數的標準試驗方法
|
Standard Test Method for Rebound Number of Hardened Concrete
|
| ASTM C 811-1998
|
耐化學侵蝕的樹脂整體面層用混凝土表面制備的標準實施規程
|
Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings
|
| ASTM C 822-2006
|
混凝土管道和相關產品的標準術語
|
Standard Termninology Relating to Concrete Pipe and Related Products
|
| ASTM C 823-2000
|
建筑用硬化混凝土檢測和取樣的標準實施規程
|
Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
|
| ASTM C 825-2006
|
預制混凝土柵欄的標準實施規范
|
Standard Specification for Precast Concrete Barriers
|
| ASTM C 856-2004
|
硬化混凝土的巖相檢查的標準實施規程
|
Standard Practice for Petrographic Examination of Hardened Concrete
|
| ASTM C 857-1995
|
地下預制混凝土公用設施的最低結構設計負荷的標準實施規程
|
Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
|
| ASTM C 858-1983
|
地下預制混凝土公用設施的標準規范
|
Standard Specification for Underground Precast Concrete Utility Structures
|
| ASTM C 862-2002
|
澆鑄法制備耐火混凝土樣件的標準實施規程
|
Standard Practice for Preparing Refractory Concrete Specimens by Casting
|
| ASTM C 865-2002
|
耐火混凝土樣件燃燒試驗的標準實施規程
|
Standard Practice for Firing Refractory Concrete Specimens
|
| ASTM C 869-1991
|
泡沫混凝土用生產預制泡沫材料用發泡劑
|
Foaming Agents Used in Making Preformed Foam for Cellular Concrete
|
| ASTM C 873-2004
|
在圓柱模型中現場澆注混凝土圓柱體的抗壓強度標準試驗方法
|
Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
|
| ASTM C 876-1991
|
混凝土中未涂覆的預應力鋼筋的半電池電勢的試驗方法
|
Test Method for Half-Cell Potentials of Uncoated Reinforcing Steel in Concrete
|
| ASTM C 877-2001
|
混凝土管、人孔和預制箱形截面用外部密封帶的標準規范
|
Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
|
| ASTM C 877M-2001
|
混凝土管、人孔和預制箱形截面用外部密封帶的標準規范(米制)
|
Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections [Metric]
|
| ASTM C 878/C 878M-2003
|
收縮補償混凝土的約束膨脹性的標準試驗方法
|
Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete
|
| ASTM C 881/C 881M-2002
|
混凝土用環氧樹脂基膠粘系統的標準規范
|
Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
|
| ASTM C 882-2005
|
斜切法測定混凝土用環氧樹脂粘結劑的粘結強度的標準試驗方法
|
Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
|
| ASTM C 883-1989
|
混凝土用環氧樹脂有效收縮性的試驗方法
|
Test Method for Effective Shrinkage of Epoxy-Resin Systems Used with Concrete
|
| ASTM C 884/C 884M-1998
|
混凝土和環氧樹脂涂層間熱容性的標準試驗方法
|
Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay
|
| ASTM C 890-2006
|
用于設計最小負荷結構的整體或分段預制混凝土貯水和廢水管道的標準實施規程
|
Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
|
| ASTM C 891-1990
|
地下預制混凝土公用設施裝配
|
Installation of Underground Precast Concrete Utility Structures
|
| ASTM C 900-2001
|
硬化混凝土拔出強度的標準測試方法
|
Standard Test Method for Pullout Strength of Hardened Concrete
|
| ASTM C 903-1998
|
用冷噴射法制作耐火混凝土樣品的標準實施規程
|
Standard Practice for Preparing Refractory Castable Specimens by Cold Gunning
|
| ASTM C 905-2001
|
耐化學的灰漿、薄漿、整體面層和聚酯混凝土表觀密度的標準試驗方法
|
Standard Test Methods for Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
|
| ASTM C 913-2002
|
水和污水結構用預制混凝土標準規范
|
Standard Specification for Precast Concrete Water and Wastewater Structures
|
| ASTM C 915-1979
|
預制鋼筋混凝土框架墻構件
|
Standard Specification for Precast Reinforced Concrete Crib Wall Members
|
| ASTM C 923-2002
|
鋼筋混凝土制檢查孔、污水管和橫向排水溝間彈性接頭的標準規范
|
Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes and Laterals
|
| ASTM C 923M-2002
|
鋼筋混凝土制檢查孔、污水管和橫向排水溝間彈性接頭的標準規范(米制)
|
Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals [Metric]
|
| ASTM C 924-2002
|
低壓空氣試驗法測試混凝土污水管道的標準實施規程
|
Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method
|
| ASTM C 924M-2002
|
低壓空氣試驗法測試混凝土污水管道標準實施規程(米制)
|
Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric)
|
| ASTM C 928-2005
|
混凝土修補用包裝的、干的、快凝粘結料標準規范
|
Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
|
| ASTM C 935-1980
|
預應力混凝土靜力鑄造桿材
|
Prestressed Concrete Poles Statically Cast
|
| ASTM C 936-1996
|
鋪路用實心混凝土內嵌單元的標準規范
|
Standard Specification for Solid Concrete Interlocking Paving Units
|
| ASTM C 937-2002
|
預置集料混凝土的灌漿流動機械的標準規范
|
Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete
|
| ASTM C 938-2002
|
預置集料混凝土的灌漿混合物的配比的實施規范
|
Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete
|
| ASTM C 939-2002
|
預置集料混凝土流漿的標準試驗方法(流動錐法)
|
Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
|
| ASTM C 940a-1998
|
在實驗室內測定預置集料混凝土用新混合灌漿料膨脹性和泌漿性的標準試驗方法
|
Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
|
| ASTM C 941-2002
|
在實驗室內進行預置集料混凝土灌漿混合料保水性試驗的標準試驗方法
|
Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory
|
| ASTM C 942-1999
|
在實驗室內測定預置集料混凝土的壓縮強度的試驗方法
|
Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
|
| ASTM C 943-2002
|
在實驗室內進行預置集料混凝土的密度和強度試驗用圓柱體和棱柱體制作試驗的標準規范
|
Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
|
| ASTM C 944-1999
|
用旋轉切割機法對混凝土或砂漿表面耐磨性的試驗方法
|
Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
|
| ASTM C 947-2003
|
薄剖面玻璃纖維增強混凝土撓曲特性的試驗方法(使用1/3跨度點荷載的簡支梁)
|
Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
|
| ASTM C 948-1981
|
玻璃纖維增強混凝土薄片的干和濕體密度、吸水率和表觀孔隙率的試驗方法
|
Test Method for Dry and Wet Bulk Density, Water Absorption and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete
|
| ASTM C 953-2006
|
實驗室內測定預置集料混凝土的灌漿料凝固時間的標準試驗方法
|
Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
|
| ASTM C 956-2004
|
現場澆注的增強石膏混凝土構件安裝的標準規范
|
Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete
|
| ASTM C 969-2002
|
安裝的預制混凝土污水管道的表面滲入和滲出的驗收檢驗的標準實施規程
|
Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
|
| ASTM C 969M-2002
|
安裝的預制混凝土污水管道的表面滲入和滲出的驗收檢驗的標準實施規程(米制)
|
Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric]
|
| ASTM C 979-2005
|
整體上彩混凝土用顏料的標準規范
|
Standard Specification for Pigments for Integrally Colored Concrete
|
| ASTM C 985-2004
|
規定強度的無鋼筋混凝土涵管、雨水管和污水管的標準規范
|
Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
|
| ASTM C 985M-2004
|
規定強度的無鋼筋混凝土涵管、雨水管和污水管(米制)的標準規范
|
Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe [Metric]
|
| ASTM C 990a-2003
|
使用預制撓性接縫密封膠的混凝土管道、人孔和預制箱形件的接縫的標準規范
|
Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
|
| ASTM C 990Ma-2003
|
使用預制撓性接縫密封膠的混凝土管道、人孔和預制箱形件的接縫的標準規范(米制)
|
Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants [Metric]
|
| ASTM C 995-1994
|
通過翻轉的坍落度筒測定纖維增強混凝土流動時間的標準試驗方法
|
Standard Test Method for Time of Flow of Fiber-Reinforced Concrete Through Inverted Slump Cone
|
| ASTM C924M-1989
|
用低壓空氣試驗法測試混凝土污水管的標準規程
|
Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric)
|
| ASTM D 1751-2004
|
混凝土鋪面和結構建筑用預制伸縮縫填料的標準規范(非擠壓和彈性瀝青型)
|
Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)
|
| ASTM D 1752a-2004
|
混凝土鋪面和結構建筑用預制微孔橡膠軟木和可回收的PVC膨脹接縫填料的標準規范
|
Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction
|
| ASTM D 1854-2002
|
熱澆注彈性型抗噴氣燃料的混凝土接縫密封料的標準規范
|
Standard Specification for Jet-Fuel-Resistant Concrete Joint Sealer, Hot-Applied Elastic Type
|
| ASTM D 1985-2003
|
接縫和裂紋粘合用密封膠測試用混凝土塊制備的標準實施規范
|
Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks
|
| ASTM D 2628-1991
|
混凝土路面用預制聚氯丁彈性接縫密封膠的標準規范
|
Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
|
| ASTM D 2835-1989
|
混凝土鋪面用預制壓縮密封物安裝用潤滑劑的標準規范
|
Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
|
| ASTM D 2950-2005
|
用核技術現場測定瀝青混凝土密度的標準試驗方法
|
Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
|
| ASTM D 3141-2004
|
底部填封硅酸鹽水泥混凝土路面用地瀝青標準規范
|
Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements
|
| ASTM D 3406-1995
|
硅酸鹽水泥混凝土路面用彈性體型熱處理的接縫密封膠標準規范
|
Standard Specification for Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements
|
| ASTM D 3569-1995
|
硅酸鹽水泥混凝土路面用抗噴氣燃料的彈性型熱澆填縫密封料
|
Standard Specification for Joint Sealant, Hot-Applied, Elastomeric, Jet-Fuel-Resistant-Type for Portland Cement Concrete Pavements
|
| ASTM D 3581-2002
|
硅酸鹽水泥混凝土和焦油混凝土路面用抗噴氣燃料型熱澆填縫密封料標準規范
|
Standard Specification for Joint Sealant, Hot-Applied, Jet-Fuel-Resistant Type, for Portland Cement Concrete and Tar-Concrete Pavements
|
| ASTM D 4071-1984
|
硅酸鹽水泥混凝土橋面防水膜的使用規程
|
Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems
|
| ASTM D 4227-2005
|
混凝土表面涂層涂刷油漆工的資格評定的標準實施規程
|
Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces
|
| ASTM D 4258-2005
|
覆層用表面清潔混凝土的標準規程
|
Standard Practice for Surface Cleaning Concrete for Coating
|
| ASTM D 4259-1988
|
混凝土的磨蝕
|
Abrading Concrete
|
| ASTM D 4260-2005
|
混凝土液態和加膠酸浸蝕的標準實施規程
|
Standard Practice for Liquid and Gelled Acid Etching of Concrete
|
| ASTM D 4261-2005
|
混凝土預制件涂覆前表面清潔處理的標準實施規范
|
Standard Practice for Surface Cleaning Concrete Unit Masonry for Coating
|
| ASTM D 4262-2005
|
化學清洗或侵蝕混凝土表面pH值的標準試驗方法
|
Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces
|
| ASTM D 4263-1983
|
塑料薄板法標示混凝土濕度的標準試驗方法
|
Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
|
| ASTM D 4580-2003
|
用測聲法測量混凝土橋面分層剝離性的標準實施規范
|
Standard Practice for Measuring Delaminations in Concrete Bridge Decks by Sounding
|
| ASTM D 4787-1993
|
對混凝土底層使用的液體或薄板襯墊的連續驗正
|
Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
|
| ASTM D 4867/D 4867M-2004
|
潮濕對瀝青混凝土鋪面混合料影響的標準試驗方法
|
Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures
|
| ASTM D 5078-1995
|
瀝青混凝土和普通水泥凝固敷設路面用加熱粉碎填充料的標準規范
|
Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements
|
| ASTM D 5249-1995
|
硅酸鹽水泥混凝土和地瀝青接頭加熱和制冷接縫密封膠襯墊材料的標準規范
|
Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints
|
| ASTM D 5295-2000
|
用水密材料粘結薄膜制備混凝土表面的標準指南
|
Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems
|
| ASTM D 5329-2004
|
瀝青及硅酸鹽水泥混凝土路面上接縫與裂紋用熱鋪密封料和填充料的標準試驗方法
|
Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
|
| ASTM D 545-1999
|
混凝土結構用預制膨脹接縫填料的試驗方法(非擠壓和彈性型)
|
Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)
|
| ASTM D 5893-2004
|
硅酸鹽水泥混凝土路面用冷鋪的單一成分、化學固化硅酮接縫密封劑的標準規范
|
Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
|
| ASTM D 5982-2002
|
新鮮混制的土壤-混凝土的混凝土含量測定的標準試驗方法(中熱法)
|
Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)
|
| ASTM D 6087-2005
|
使用地面穿透雷達評價瀝青覆蓋混凝土船橋甲板的標準試驗方法
|
Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar
|
| ASTM D 6237-2003
|
涂漆檢查員用標準指南(混凝土和磚石基質)
|
Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
|
| ASTM D 6449-1999
|
織物成形混凝土用細集料混凝土流量的標準試驗方法
|
Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)
|
| ASTM D 6489-1999
|
防水涂料處理過的硬化混凝土的吸水性測定的標準試驗方法
|
Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating
|
| ASTM D 6638-2001
|
土工合成加筋和分段式混凝土構件間的連接強度的測定的標準試驗方法(模數化混凝土塊)
|
Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)
|
| ASTM D 6684-2004
|
活節混凝土塊(ACB)鋪面系統的材料和生產標準規范
|
Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems
|
| ASTM D 6685-2001
|
纖維制混凝土用織物的試驗方法的選擇的標準指南
|
Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete
|
| ASTM D 6690-2006
|
瀝青鋪路和混凝土熱應用連接和裂紋密封劑的標準規范
|
Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
|
| ASTM D 6760-2002
|
用超聲波孔間試驗測試混凝土深地基完整性的標準試驗方法
|
Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
|
| ASTM D 6783-2005
|
聚合物混凝土管的標準規范
|
Standard Specification for Polymer Concrete Pipe
|
| ASTM D 6884-2003
|
活節混凝土塊護坡系統安裝的標準實施規程
|
Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems
|
| ASTM D 7116-2005
|
硅酸鹽水泥混凝土鋪面用抗噴射燃料的熱澆接縫密膠的標準規范
|
Standard Specification for Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland Cement Concrete Pavements
|
| ASTM D 7174-2005
|
混凝土面層和結構建造用預制閉孔聚烯烴伸縮接頭填充料的標準規范
|
Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
|
| ASTM D 7234-2005
|
用便攜脫開式粘附力測定儀測定混凝土覆層脫粘強度的標準試驗方法
|
Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
|
| ASTM D 994-1998
|
混凝土用預制膨脹接縫填充料(瀝青型)的標準規范
|
Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)
|
| ASTM E 154-1999
|
混凝土板、墻或土壤覆層的與地面接觸的水氣隔層的標準試驗方法
|
Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
|
| ASTM E 1643-1998
|
與混凝土板下土壤或粒狀填料接觸用水蒸汽阻滯劑的安放標準實施規范
|
Standard Practice for Installation of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
|
| ASTM E 1745-1997
|
混凝土板下土壤或粒狀填料接觸的水蒸氣緩凝劑用標準規范
|
Standard Specification for Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs
|
| ASTM E 1857-1997
|
砂漿、混凝土和拉毛粉刷面清潔技術選擇的標準指南
|
Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces
|
| ASTM E 1993-1998
|
與混凝土板下土壤或粒狀填料接觸用瀝青水蒸汽阻滯劑的標準規范
|
Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
|
| ASTM E 2179-2003
|
地板覆蓋物在降低穿過混凝土地面?zhèn)鞑サ呐鲎猜曇粜Ч膶嶒炇覝y量的標準試驗方法
|
Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors
|
| ASTM E 2216-2002
|
核設施退役區混凝土處理方案的評估標準指南
|
Standard Guide for Evaluating Disposal Options for Concrete from Nuclear Facility Decommissioning
|
| ASTM E 488-1996
|
混凝土及砌塊構件中錨定強度的試驗方法
|
Standard Test Methods for Strength of Anchors in Concrete and Masonry Elements
|
| ASTM E 835/E 835M-1993
|
粘土和混凝土磚石構件的尺寸配合的標準指南
|
Standard Guide for Modular Coordination of Clay and Concrete Masonry Units
|
| ASTM F 1869-2004
|
用無水氯化鈣測量混凝土底層地板濕氣發散率的標準試驗方法
|
Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
|
| ASTM F 1987-2001
|
水硬水泥混凝土和灰漿用乳狀和粉末聚合物改良劑的標準規范
|
Standard Specification for Multilayer Pipe Type 2 , Compression Fittings, and Compression Joints for Hydronic Heating Systems
|
| ASTM F 2419-2005
|
濃漿石膏混凝土襯底的安裝以及承受彈性樓面的表面的制備的標準實施規程
|
Standard Practice for Installation of Thick Poured Gypsum Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
|
| ASTM F 2420-2005
|
用相對濕度探針測量法和絕緣蓋測定混凝土地板表面相對濕度的標準試驗方法
|
Standard Test Method for Determining Relative Humidity on the Surface of Concrete Floor Slabs Using Relative Humidity Probe Measurement and Insulated Hood
|
| ASTM F 2471-2005
|
厚澆注輕質多孔混凝土墊層的安裝和承載彈性地板表面的制備的標準實施規程
|
Standard Practice for Installation of Thick Poured Lightweight Cellular Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
|
| ASTM F 710-2005
|
彈性地板鋪設前混凝土樓板準備的標準規程
|
Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring
|
| ASTM G 109a-1999
|
混凝土暴露于氯化物環境時確定化學混合物對埋置鋼筋腐蝕作用的標準試驗方法
|
Standard Test Method for Determining the Effects of Chemical Admixtures on the Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
|
| ASTM G 180-2004
|
混凝土中鋼用腐蝕抑制混合料的初始篩分的標準試驗方法
|
Standard Test Method for Initial Screening of Corrosion Inhibiting Admixtures for Steel in Concrete
|
| IEEE 1025-1993
|
混凝土電線桿結構組裝和豎立安裝
|
(Assembly and erection of concrete pole structures) |
| UL 618-1995
|
混凝土磚石工程設備
|
(Concrete masonry units )
|
| UL 745-2-12-1995
|
混凝土振搗器特殊要求
|
(Particular requirements for concrete vibrators )
|
| 編號 | 中文名稱 | 英文名稱 |
|---|