| 編號 | 中文名稱 | 英文名稱 |
|---|
| DIN 1045-1 Berichtigung 2-2005
|
混凝土、加筋和預應力混凝土結構.第1部分:設計和施工.DIN 1045-1-2001的勘誤
|
Concrete, reinforced and prestressed concrete structures - Part 1: Design and construction, Corrigenda to DIN 1045-1:2001-07
|
| DIN 1045-1-2001
|
加筋和預應力混凝土構件.第1部分:設計
|
Concrete, reinforced and prestressed concrete structures - Part 1: Design and construction
|
| DIN 1045-100-2005
|
加筋和預應力混凝土結構.第100部分:磚地
|
Concrete, reinforced and prestressed concrete structures - Part 100: Brick floors
|
| DIN 1045-2-2001
|
混凝土、加筋和預應力混凝土結構.第2部分:混凝土:性能、生產和一致性規范.DIN EN 206-1的應用規則
|
Concrete, reinforced and prestressed concrete structures - Part 2: Concrete; Specification, properties, production and conformity; Application rules for DIN EN 206-1
|
| DIN 1045-2/A1-2005
|
加筋和預應力混凝土結構.第2部分:混凝土規范、特性、生產和一致性.DIN EN 206-1的應用規則.修改件A1
|
Concrete, reinforced and prestressed concrete structures - Part 2: Concrete - Specification, properties, production and conformity; Application rules for DIN EN 206-1; Amendment A1
|
| DIN 1045-3-2001
|
混凝土、加筋和預應力混凝土結構.第3部分:結構實施
|
Concrete, reinforced and prestressed concrete structures - Part 3: Execution of structures
|
| DIN 1045-3/A1-2005
|
加筋和預應力混凝土結構.第3部分:結構物的施工.修改件A1
|
Concrete, reinforced and prestressed concrete structures - Part 3: Execution of structures; Amendment A1
|
| DIN 1045-4-2001
|
混凝土、加筋和預應力混凝土結構.第4部分:預制元件生產和一致性控制的附加規則
|
Concrete, reinforced and prestressed concrete structures - Part 4: Additional rules for the production and conformity control of prefabricated elements
|
| DIN 1048-2-1991
|
混凝土檢驗法.第2部分:硬化混凝土的檢驗 (現場取樣)
|
Testing concrete; testing of hardened concrete (specimens taken in situ)
|
| DIN 1048-4-1991
|
混凝土檢驗法.構件和部件的硬化混凝土抗壓強度的測定.第4部分:基準線的應用和用特殊方法進行的評價
|
Test methods for concrete; determination of the compressive strength in hardened concrete in structures and components; application of reference lines and evaluation with special methods
|
| DIN 1075-1981
|
混凝土橋.定尺寸和施工
|
Concrete bridges; Dimensioning and construction
|
| DIN 1080-3-1980
|
土木工程術語、符號和單位.混凝土和鋼筋混凝土結構、預應力混凝土結構、磚石結構
|
Terms, Symbols and Units Used in Civil Engineering; Concrete Construction and Reinforced Concrete Construction, Prestressed Concrete Construction, Masonry Construction
|
| DIN 1080-4-1980
|
土木建筑工程用術語、符號和單位.混凝土結構、復合鋼結構和混凝土中的鋼大梁
|
Terms, Symbols and Units Used in Civil Engineering; Concrete Construction, Composite Steel Construction and Steel Girders in Concrete
|
| DIN 11622-2-2004
|
青貯料和廄液容器.第2部分:設計原則.加筋混凝土、加筋混凝土預制件、混凝土塊和混凝土模板塊制青貯料和廄液
|
Silage and liquid manure containers - Part 2: Design principles - Silage and liquid manure containers made of reinforced concrete, precast reinforced concrete elements, concrete blocks and concrete blocks acting as lost formwork
|
| DIN 11622-21-2004
|
青貯料和廄液容器.第21部分:混凝土塊
|
Silage and liquid manure containers - Part 21: Concrete blocks
|
| DIN 11622-22-2004
|
青貯料和廄液容器.第22部分:混凝土模板塊
|
Silage and liquid manure containers - Part 22: concrete blocks acting as lost formwork
|
| DIN 1211-1-2003
|
人孔錯列階梯腳扣.第1部分:砌墻或澆灌混凝土階梯腳扣
|
Step irons for staggered manhole steps - Part 1: Step irons to be fitted in masonry or set into concrete
|
| DIN 1211-2-2003
|
人孔錯列階梯腳扣.第2部分:澆入混凝土預制件的階梯腳扣
|
Step irons for staggered manhole steps - Part 2: Step irons to be set into prefabricated concrete units
|
| DIN 1212-1-2003
|
人孔直立錯列階梯腳扣.第1部分:砌墻或澆灌混凝土階梯腳扣
|
Step irons with upstand for staggered manhole steps - Part 1: Step irons to be fitted in masonry or set into concrete
|
| DIN 1212-2-2003
|
人孔直立錯列階梯腳扣.第2部分:澆入混凝土預制件的階梯腳扣
|
Step irons with upstand for staggered manhole steps - Part 2: Step irons to be set into prefabricated concrete units
|
| DIN 1236-1-1981
|
A和B類排水溝用的混凝土構件和斗件.結構、安裝和組件
|
Class A and class B concrete elements and buckets for gullies; Design; installation and assemblies
|
| DIN 1236-2-1981
|
A和B類排水溝用的混凝土構件和斗件.混凝土構件
|
Classe A and class B concrete elements and buckets for gullies; Concrete elements
|
| DIN 1236-3-1981
|
A和B類排水溝用的混凝土構件和斗件.斗件
|
Classes A and B concrete elements and buckets for gullies; Buckets
|
| DIN 18057-2005
|
混凝土窗.尺寸計算、要求、試驗
|
Concrete windows - Dimensioning, requirements, tests
|
| DIN 18093-1987
|
防火間隔.防火砌墻或混凝土墻壁中防火門的安裝.固定位置，形狀和安裝
|
Fire barriers; installation of fire doors in fireproof masonry or concrete walls; position and shapes of anchorages, installation
|
| DIN 18147-2-1982
|
三層煙囪用建筑材料和建筑部件.外層用的輕質混凝土元件.要求及檢驗
|
Building material and building elements for three-layered chimneys; elements of light-weight concrete for the outer layer; requirements and tests
|
| DIN 18147-3-1982
|
三層煙囪用建筑材料和建筑部件.內層用輕質混凝土元件.要求及檢驗
|
Building material and building elements for three-layered chimneys; elements of light-weight concrete for the inner layer; requirements and tests
|
| DIN 18148-2000
|
輕質混凝土空心壁板
|
Lightweight-concrete hollow-boards
|
| DIN 18150-1-1979
|
煙囪建造用建筑材料和構件.第1部分:輕型混凝土煙道、同質煙囪、要求
|
Building materials and components for building chimneys; lightweight concrete flues, homogenous chimneys, requirements
|
| DIN 18150-2-1987
|
一層煙囪用建筑材料和部件.輕質混凝土制煙道.檢驗和監督
|
Building material and elements for one-layered chimneys; lightweight concrete flues; examination and supervision
|
| DIN 18162-2000
|
輕質混凝土.無鋼筋墻板
|
Lightweight concrete wallboards - unreinforced
|
| DIN 18178-1972
|
混凝土和鋼筋混凝土制煙道.煙道通風罩和煙道底座.尺寸.要求.檢驗
|
Concrete and reinforced concrete ducts; hoods and bases for ducts, dimensions, requirements, testing
|
| DIN 18203-1-1997
|
建筑施工尺寸公差.混凝土預制件.鋼筋混凝土預制件和預應力混凝土制件
|
Tolerances in building construction - Part 1: Prefabricated components made of concrete, reinforced concrete and prestressed concrete
|
| DIN 18215-1973
|
混凝土與鋼筋混凝土建筑物用木制模板.標準尺寸0.5m×1.5m厚21mm
|
Timer form boards for concrete and reinforced concrete structures; standard dimension 0,50 m × 1,50 m; thickness = 21 mm
|
| DIN 18217-1981
|
混凝土面及模板表面
|
Concrete surfaces and formwork surface
|
| DIN 18218-1980
|
新澆混凝土對垂直模板的壓力
|
Pressure of fresh concrete on vertical formwork
|
| DIN 18551-2005
|
噴射混凝土.規范、生產、設計與一致性
|
Shotcrete - Specification, production, design and conformity
|
| DIN 19555 Berichtigung 1-2006
|
單行安裝的階梯腳扣.鑲嵌在混凝土中的階梯腳扣.DIN 19555-2003的勘誤
|
Step irons for single-line installation - Step irons for setting in concrete, Corrigenda to DIN 19555:2003-04
|
| DIN 19555-2003
|
單線安裝的階梯腳扣.鑲嵌在混凝土中的階梯腳扣
|
Step irons for single-line installation - Step irons for setting in concrete
|
| DIN 19585-1976
|
下水道管件.鑄鐵管件、混凝土管件及與鑄鐵相連的混凝土制管件的交貨技術條件
|
Sewage fittings; technical specifications for delivery for fittings from cast iron, concrete and concrete in connection with cast iron
|
| DIN 19695-1977
|
混凝土管、鋼筋混凝土管及預應力混凝土管、管件和混凝土檢查井的筒圈的運輸和儲存說明書
|
Directions for transporting and storing of concrete pipes, reinforced concrete pipes, prestressed concrete pipes and fittings and concrete manhole shaft rings
|
| DIN 19720-1991
|
地面混凝土箱涵的混凝土地板.尺寸和類型
|
Concrete ground plates for surface boxes; dimensions, types
|
| DIN 21525-1964
|
地下巷道支護用混凝土塊
|
Concrete blocks to support undergroundroads
|
| DIN 2410-3-1978
|
管件.混凝土、鋼筋混凝土和預應力混凝土管件的標準的綜述
|
Pipes; Survey of Standards for Pipes from Concrete, Reinforced Concrete and Prestressed Concrete
|
| DIN 24117-1987
|
建筑機械和建筑材料工業用機械.混凝土泵用分配桿.計算原則和穩定性
|
Machines for the building and building-material industries; distributing mast for concrete pumps; principles of calculation and stability
|
| DIN 24118-1984
|
建筑機械和建筑材料機械.混凝土輸送管道.尺寸
|
Construction machines and machines for building materials; concrete delivery pipelines; dimensions
|
| DIN 25413-1-1991
|
屏蔽混凝土按元件比例分類.第1部分:中子射線的屏蔽
|
Classification of shielding concretes by proportion of elements; neutron shielding
|
| DIN 25413-2-1991
|
屏蔽混凝土按元件比例分類.第2部分:γ射線的屏蔽
|
Classification of shielding concretes by proportion of elements; gamma shielding
|
| DIN 25420-1 Bb.1-1997
|
混凝土熱室的建造.第1部分:遙控?zé)崾乙?設計舉例
|
Construction of concrete hot cells - Part 1: Requirements for remotely operated cells; design examples
|
| DIN 25420-1 Bb.2-1992
|
混凝土熱室的建造.對遙控?zé)崾业囊?屏蔽計算
|
Construction of concrete hot cells; requirements for remotely operated cells; shielding calculation
|
| DIN 25420-1-1990
|
混凝土熱室的建造.對遠距離操作室的要求
|
Construction of concrete hot cells; requirements for remotely operated cells
|
| DIN 25420-2 Bb.1-1989
|
混凝土熱室的建造.加工室和貯藏庫的要求.第2 Bb 1部分:性能示例
|
Construction of concrete hot cells; requirements of processing and storage cells; examples of performance
|
| DIN 25420-2-1990
|
混凝土熱室的建造.對操作室和儲存室的要求
|
Construction of concrete hot cells; requirements for processing and storage cells
|
| DIN 25420-3 Bb.1-2000
|
混凝土熱室的建造.第3部分:對于不同密度混凝土墻上輻射防護窗的要求.安裝導則
|
Construction of concrete hot cells - Part 3: Requirements for shielding windows for concrete walls with different densities; installation guidelines
|
| DIN 25420-3-2000
|
混凝土熱室的建造.第3部分:對于不同密度混凝土墻上輻射防護窗的要求
|
Construction of concrete hot cells - Part 3: Requirements for shielding windows for concrete walls with different densities
|
| DIN 25420-4-2000
|
混凝土熱室的建造.第4部分:對密度為2.3g/cm3的不同厚度混凝土墻上輻射防護窗的要求
|
Construction of concrete hot cells - Part 4: Requirements of shielding windows for concrete walls density 2,3 g/cm<(hoch)3> with different thicknesses
|
| DIN 25427-1-1977
|
防γ射線輻射的混凝土屏蔽墻中雙彎充氣管道的設計.術語和條件
|
Design of Gas-filled Double-bend Ducts in Concrete Shields against Gamma Radiation; Terms and Conditions
|
| DIN 25449-1987
|
核電站中鋼筋混凝土構件承受因內部故障引起的負荷的設計準則
|
Design criteria for reinforced concrete subject to loadings as a result of internal incidents in nuclear power plants
|
| DIN 28052-1-2001
|
化工裝置.使用非金屬材料對工藝流程設備的混凝土構件的表面處理.第1部分:術語和選擇標準
|
Chemical apparatus - Surface treatment of concrete components in process plants using nonmetallic materials - Part 1: Terms, selection criteria
|
| DIN 28052-3-1994
|
化工設備.工藝流程設備中使用非金屬材料對混凝土構件作表面處理.第3部分:有機物涂層
|
Chemical apparatus - Surface treatment of concrete components in process plants using nonmetallic materials - Part 3: Organic coatings
|
| DIN 28052-5-1997
|
化工設備.工藝技術設備中混凝土構件非金屬材料表面處理.第5部分:合成涂層
|
Chemical apparatus - Surface treatment of concrete components in process plants using non-metallic materials - Part 5: Combined coatings
|
| DIN 28052-6-2001
|
化工設備.加工廠使用非金屬材料對混凝土構件的表面處理.第6部分:試驗方法
|
Chemical apparatus - Surface treatment of concrete components in process plants using non-metallic materials - Part 6: Test methods
|
| DIN 4030-1-1991
|
對混凝土有侵蝕性的水、土壤和氣體的評估.第1部分:原則和極限值
|
Assessment of water, soil and gases for their aggressiveness to concrete; principles and limiting values
|
| DIN 4030-2-1991
|
對混凝土有侵蝕性的水、土壤和氣體的評估.第2部分:水和土壤的取樣和分析
|
Assessment of water, soil and gases for their aggressiveness to concrete; collection and examination of water and soil samples
|
| DIN 4034-10-1995
|
預制混凝土和鋼筋混凝土井筒和檢驗室.第10部分:地下敷設排水管道用磚砌井筒底部.要求和檢驗
|
Prefabricated concrete and reinforced concrete manholes and inspection chambers - Part 10: Brick manhole bases for buried drains and sewers; requirements and testing
|
| DIN 4034-2-1990
|
通風井和排水坑用預制混凝土和鋼筋混凝土部件.第2部分:尺寸與交貨技術條件
|
Precast unreinforced and reinforced concrete components for well shafts and soakaways; dimensions and technical delivery conditions
|
| DIN 4052-1-2006
|
道路排水溝的混凝土構件和斗式地漏.第1部分:一般要求和安裝
|
Concrete elements and buckets for road gullies - Part 1: General requirements and installation
|
| DIN 4052-2-2006
|
道路排水溝的混凝土構件和斗式地漏.第4部分:概要和名稱與符號
|
Concrete elements and buckets for road gullies - Part 2: Summary and designations
|
| DIN 4052-3-2006
|
公路排水溝用混凝土構件和斗式地漏.第3部分:混凝土構件
|
Concrete elements and buckets for road gullies - Part 3: Concrete elements
|
| DIN 4052-4-2006
|
道路排水溝的混凝土構件和斗式地漏.第4部分:斗式地漏
|
Concrete elements and buckets for road gullies - Part 4: Buckets
|
| DIN 4158-1978
|
鋼筋混凝土和預應力混凝土地板填充混凝土接縫
|
Filler concrete joists for reinforced and prestressed concrete floors
|
| DIN 4166-1997
|
加氣混凝土厚板和平板
|
Autoclaved aerated concrete slabs and panels
|
| DIN 4212-1986
|
加筋混凝土和預應力混凝土起重機軌道.設計和施工
|
Reinforced concrete and prestressed concrete craneways; design and construction
|
| DIN 4213-2003
|
輕骨料混凝土預制增強構件透空式結構粘合
|
Application in structures of prefabricated reinforced components of lightweight aggregate concrete with open structure
|
| DIN 4223-1-2003
|
蒸壓加氣混凝土預制加筋部件.第1部分:生產、特性和合格評定
|
Prefabricated reinforced components of autoclaved aerated concrete - Part 1: Manufacturing, properties, attestation of conformity
|
| DIN 4223-2-2003
|
蒸壓加氣混凝土預制加筋部件.第2部分:結構部件設計和計算
|
Prefabricated reinforced components of autoclaved aerated concrete - Part 2: Design and calculation of structural components
|
| DIN 4223-3-2003
|
高壓蒸養加氣混凝土的預制加筋部件.第3部分:非結構部件的設計和計算
|
Prefabricated reinforced components of autoclaved aerated concrete - Part 3: Design and calculation of non stuctural components
|
| DIN 4223-4-2003
|
高壓蒸養加氣混凝土的預制加筋部件.第4部分:結構部件的設計和計算.結構部件的應用
|
Prefabricated reinforced components of autoclaved aerated concrete - Part 4: Design and calculation of structural components; Application of components in structures
|
| DIN 4223-5-2003
|
蒸壓加氣混凝土預制加筋部件.第5部分:安全性原則
|
Prefabricated reinforced components of autoclaved aerated concrete - Part 5: Safety concept
|
| DIN 4226-100-2002
|
混凝土和灰漿集料.第100部分:回收的集料
|
Aggregates for concrete and mortar - Part 100: Recycled aggregates
|
| DIN 4235-1-1978
|
采用振蕩法壓實混凝土.第1部分:振蕩器和振蕩機械
|
Compacting of Concrete by Vibrating; Vibrators and Vibration Mechanics
|
| DIN 4235-2-1978
|
采用振動法壓實混凝土.第2部分:用插入式振蕩器壓實
|
Compacting of Concrete by Vibrating; Compacting by Internal Vibrators
|
| DIN 4235-3-1978
|
采用振蕩法壓實混凝土.第3部分:生產預制件時用外部外部振蕩器壓實
|
Compacting of Concrete by Vibrating; Compacting by External Vibrators during the Manufacture of Precast Components
|
| DIN 4235-4-1978
|
采用振蕩法壓實混凝土.第4部分:用模板振蕩器現場壓實
|
Compacting of Concrete by Vibrating; Compacting of In-situ by Formwork Vibrators
|
| DIN 4235-5-1978
|
采用振蕩法壓實混凝土.第5部分:用表面振蕩器壓實
|
Compacting of Concrete by Vibrating; Compacting by Surface Vibrators
|
| DIN 4262-3-1991
|
高速公路和土木工程用混凝土排水管和多用連管.第3部分:要求和檢驗
|
Concrete drainage pipes and multipurpose pipes for highway and civil engineering purposes; requirements and testing
|
| DIN 4266-3-1992
|
掩埋的混凝土排放管.要求、檢驗和控制
|
Concrete drainage pipes for landfills; requirements, testing and control
|
| DIN 4281-1998
|
下水道裝置用混凝土.生產、要求、試驗和質量控制
|
Concrete for prefabricated sewage units - Manufacture, requirements, testing and quality control
|
| DIN 45635-62-1989
|
機器排放的空氣傳播噪聲的測量.第62部分:包洛面法.混凝土磚塊、板條、管道和預制件生產用機器和設備
|
Measurement of airborne noise emitted by machines; enveloping surface method; machines and equipment for the manufacture of concrete blocks, slabs, pipes and prefabricated elements
|
| DIN 459-1-1995
|
建筑材料機械.混凝土和灰漿用攪拌機.第1部分:性能和尺寸的術語和定義
|
Building material machines - Mixers for concrete and mortar - Part 1: Terms, determination of performance, sizes
|
| DIN 459-2-1995
|
建筑材料機械.混凝土和灰漿用攪拌機.第2部分:混凝土攪拌機的攪拌效率的檢驗規程
|
Building material machines - Mixers for concrete and mortar - Part 2: Procedure for the examination of the mixing efficiency of concrete mixers
|
| DIN 483-2005
|
混凝土路緣石塊體.形狀、尺寸和標記
|
Concrete kerb units - Shapes, dimensions, marking
|
| DIN 48353-1-1965
|
第1部分:最高可達20kV的單工電路用鋼筋混凝土天線桿
|
Steel-concrete masts for simplex circuits up to 20 kV
|
| DIN 48353-2-1965
|
鋼筋混凝土天線桿第2部分:天線桿的選則指導
|
Steel-concrete masts; directions for choosing the masts
|
| DIN 51290-1-1991
|
機器工程用聚合物混凝土(反應性樹脂混凝土)的檢驗.第1部分:術語
|
Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; terminology
|
| DIN 51290-2-1991
|
機器工程用反應性樹脂混凝土的檢驗.第2部分:粘合劑、填充劑和反應性樹脂混合物的檢驗
|
Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; testing of binders, fillers and reaction resin compounds
|
| DIN 51290-3-1991
|
機器工程用反應性樹脂混凝土的檢驗.第3部分:分別制作試樣的檢驗
|
Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; testing of separatly manufactured specimens
|
| DIN 51290-4-1991
|
機器工程用反應性樹脂混凝土的檢驗.第4部分:生產過程中和成品部件的檢驗
|
Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; in-process testing and testing of final parts
|
| DIN 52170-1-1980
|
硬化混凝土成分的測定.概述、術語、取樣、毛體積干密度
|
Determination of composition of hardened concrete; general, terms, sampling, dry-bulk density
|
| DIN 52170-2-1980
|
硬化混凝土成分的測定.不溶于鹽酸的含石灰石和/或白云石的集料.原材料不供應
|
Determination of composition of hardened concrete; hydrochloric acid insoluble, limestone and/or dolomite containing aggregate, materials used for the concrete not available
|
| DIN 52170-3-1980
|
硬化混凝土成分的測定.不溶于鹽酸的集料.不提供混凝土用材料
|
Determination of composition of hardened concrete; hydrochloric acid insoluble aggregate, materials used for the concrete not available
|
| DIN 52170-4-1980
|
硬化混凝土成分的測定.溶于鹽酸的和/或不溶于鹽酸的集料.全部或部分供應混凝土中使用的材料
|
Determination of composition of hardened concrete; hydrochloric acid soluble and/or insoluble aggregate, materials used for the concrete totally or partly available
|
| DIN 52252-1-1986
|
飾面磚和礦渣混凝土砌塊的抗凍試驗.單塊磚的所有面的冷凍
|
Testing the frost resistance of facing bricks and clinker blocks; freezing of single bricks on all sides
|
| DIN 52252-2-1986
|
飾面磚和礦渣混凝土砌塊的抗凍試驗.按檢驗批中排列磚的冷凍
|
Testing the frost resistance of facing bricks and clinker blocks; freezing of bricks arranged in test blocks
|
| DIN 68791-1979
|
混凝土和鋼筋混凝土用加芯膠合板的大面積模板
|
Large area shuttering panels of core plywood for concrete and reinforced concrete
|
| DIN 68792-1979
|
混凝土和鋼筋混凝土用飾面膠合板的大面積模板
|
Large area shuttering panels of veneer plywood for concrete and reinforced concrete
|
| DIN 7865-1-1982
|
混凝土接縫密封用的彈性填縫片.形狀和尺寸
|
Elastomeric joint sealing strip for sealing joints in concrete; Shape and dimensions
|
| DIN 7865-2-1982
|
混凝土接縫密封用的彈性填縫片.對材料的要求和檢驗
|
Elastomeric joint sealing strip for sealing joints in concrete; Material requirements and testing
|
| DIN CEN/TS 14038-1-2005
|
加筋混凝土的電化學realkalization和氯化物萃取處理.第1部分:realkalization
|
Electrochemical realkalization and chloride extraction treatments for reinforced concrete - Part 1: Realkalization; German version CEN/TS 14038-1:2004
|
| DIN CEN/TS 15087-2006
|
屋頂用已裝粘土和混凝土嵌合瓦片的抗隆起性測定.機械緊固件的試驗方法.德文版本CEN/TS 15087-2005
|
Determination of the uplift resistance of installed clay and concrete interlocking tiles for roofing - Test method for mechanical fasteners; German version CEN/TS 15087:2005
|
| DIN EN 1008-2002
|
混凝土用攪拌水.作為混凝土攪拌水包括混凝土工業加工回收水的適用性的取樣、試驗和評估規范; 德文版本 EN 1
|
Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete; German version EN 1008:2002
|
| DIN EN 10080-2005
|
混凝土加筋用鋼.可焊性鋼筋.總則
|
Steel for the reinforcement of concrete - Weldable reinforcing steel - General; German version EN 10080:2005
|
| DIN EN 1062-1-2004
|
色漆和清漆.外部磚石和混凝土用涂層材料和涂層系統.第1部分:分類
|
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 1: Classification; German version EN 1062-1:2004
|
| DIN EN 1062-11 Berichtigung 1-2005
|
色漆和清漆.外部磚石建筑和混凝土用覆層材料和涂覆系統.第11部分:試驗前的調節方法.對DIN EN 1062-11-2002
|
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 11: Methods of conditioning before testing; German version EN 1062-11:2002, Corrigenda to DIN EN 1062-11:2002-10; German version EN 1062-11:2002/AC:2005
|
| DIN EN 1062-11-2002
|
色漆和清漆.外部磚石建筑和混凝土用覆層材料和涂覆系統.試驗前的修整方法
|
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 11: Methods of conditioning before testing; German version EN 1062-11:2002
|
| DIN EN 1062-3-1999
|
油漆和清漆.外部砌磚體和混凝土用涂層材料和涂層系統.第3部分:液體－水傳輸(滲透)率的測定和分類
|
Paints and varnishes - Coating materials and coating system for exterior masonry and concrete - Part 3: Determination and classification of liquid-water transmission rate (permeability); German version EN 1062-3:1998
|
| DIN EN 1062-6-2002
|
涂料和清漆.外墻磚石和混凝土用涂層材料和涂覆系統.第6部分:二氧化碳滲透性測定
|
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability; German version EN 1062-6:2002
|
| DIN EN 1062-7-2004
|
清漆和涂料.外部磚石和混凝土用涂層材料和涂層系統.第7部分:裂縫遮避性能的測定
|
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties; German version EN 1062-7:2004
|
| DIN EN 1128-1995
|
混凝土粘接碎料板.耐硬物沖擊性測定
|
Cement-bounded particleboards - Determination of hard body impact resistance; German version EN 1128:1995
|
| DIN EN 1168-2005
|
預制混凝土產品.空芯板
|
Precast concrete products - Hollow core slabs; German version EN 1168:2005
|
| DIN EN 1169-1999
|
混凝土預制件.玻璃纖維增強混凝土工廠生產控制一般規則
|
Precast concrete products - General rules for factory production control of glass-fibre reinforced cement; German version EN 1169:1999
|
| DIN EN 1170-1-1998
|
混凝土預制件.玻璃纖維增強混凝土的試驗方法.第1部分:基質一致性的測量.坍落試驗法
|
Precast concrete products - Test method for glass-fibre reinforced cement - Part 1: Measuring the consistency of the matrix; "Slump test" method; German version EN 1170-1:1997
|
| DIN EN 1170-2-1998
|
混凝土預制件.玻璃纖維增強混凝土用檢驗方法.第2部分:新鮮的玻璃纖維混凝土中纖維含量的測定.沖洗試驗
|
Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC; "wash out test"; German version EN 1170-2:1997
|
| DIN EN 1170-3-1998
|
混凝土預制件.玻璃纖維增強混凝土試驗方法.第3部分:噴射GRC中纖維含量測量
|
Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of sprayed GRC; German version EN 1170-3:1997
|
| DIN EN 1170-4-1998
|
混凝土預制件.玻璃纖維增強混凝土試驗方法.第4部分:抗彎強度測量.簡化抗彎試驗法
|
Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength; "simplified bending test" method; German version EN 1170-4:1997
|
| DIN EN 1170-5-1998
|
混凝土預制件.玻璃纖維增強混凝土試驗方法.第5部分:抗彎強度測量.完整抗彎試驗法
|
Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength; "complete bending test" method; German version EN 1170-5:1997
|
| DIN EN 1170-6-1998
|
混凝土預制件.玻璃纖維增強混凝土試驗方法.第6部分:浸入法水吸附和干密度測定
|
Precast concrete products - Test method for glass-fibre reinforced cement - Part 6: Determination of the absorption of water by immersion and determination of the dry density; German version EN 1170-6:1997
|
| DIN EN 1170-7-1998
|
混凝土預制件.玻璃纖維增強混凝土試驗方法.第7部分:濕度引起尺寸變化極限值測量
|
Precast concrete products - Test method for glass-fibre reinforced cement - Part 7: Measurement of extremes of dimensional variations due to moisture content; German version EN 1170-7:1997
|
| DIN EN 12001-2004
|
混凝土和灰漿用傳送、噴射和放置機械.安全要求
|
Conveying, spraying and placing machines for concrete and mortar - Safety requirements; German version EN 12001:2003
|
| DIN EN 12188-1999
|
混凝土支承結構防護和維修用產品和系統.試驗方法.通過測定鋼板膠粘作用表征結構膠粘劑性能
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterisation of structural bonding agents; German version EN 12188:1999
|
| DIN EN 12189-1999
|
混凝土支承結構防護和維修用產品和系統.試驗方法.敞開時間測定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of open time; German version EN 12189:1999
|
| DIN EN 12190-1998
|
混凝土支承結構防護和維修用產品和系統.檢驗方法.維修用灰漿抗壓強度測定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar; German version EN 12190:1998
|
| DIN EN 12192-1-2002
|
混凝土構件的保護和檢修用產品和系統.粒度分析.第1部分:預混合灰漿干成份的檢驗方法; 德文版本 EN 12192-1:
|
Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar; German version EN 12192-1:2002
|
| DIN EN 12192-2-1999
|
混凝土支承結構防護和維修用產品和系統.粒度分析.第2部分;聚合物粘合劑填料檢驗方法
|
Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents; German version EN 12192-2:1999
|
| DIN EN 12269-1-2000
|
通過抗彎試驗測定鋼筋和高壓蒸汽加氣混凝土粘性.第1部分:短期試驗
|
Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "beam test" - Part 1: Short term test; German version EN 12269-1:2000
|
| DIN EN 12269-2-2004
|
通過抗彎試驗測定鋼筋和高壓蒸氧加氣混凝土之間的粘結特性.第2部分:長期試驗
|
Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test - Part 2: Long term test; German version EN 12269-2:2003
|
| DIN EN 12350-1-2000
|
新澆混凝土試驗.第1部分:取樣
|
Testing fresh concrete - Part 1: Sampling; German version EN 12350-1:1999
|
| DIN EN 12350-2-2000
|
新澆混凝土試驗.第2部分:蹋落度試驗
|
Testing fresh concrete - Part 2: Slump test; German version EN 12350-2:1999
|
| DIN EN 12350-3-2000
|
試驗新澆混凝土.第3部分:維比稠度試驗;德文版本EN 12350-3-1999
|
Testing fresh concrete - Part 3: Vebe test; German version EN 12350-3:1999
|
| DIN EN 12350-4-2000
|
試驗用新澆混凝土.第4部分:密實度等級
|
Testing fresh concrete - Part 4: Degree of compactability; German version EN 12350-4:1999
|
| DIN EN 12350-5-2000
|
試驗用新澆混凝土.第5部分:流動試驗臺試驗
|
Testing fresh concrete - Part 5: Flow table test; German version EN 12350-5:1999
|
| DIN EN 12350-6-2000
|
新澆混凝土試驗.第6部分:密度試驗
|
Testing fresh concrete - Part 6: Density; German version EN 12350-6:1999
|
| DIN EN 12350-7-2000
|
新澆混凝土試驗.第7部分:空氣含量.壓力法
|
Testing fresh concrete - Part 7: Air content; Pressure methods; German version EN 12350-7:2000
|
| DIN EN 12390-1 Berichtigung 1-2006
|
硬化混凝土試驗.第1部分:試樣和模型形狀、尺寸和其他要求.DIN EN 12390-5-2001勘誤
|
Testing hardened concrete - Part 1: Shape, dimensions and other requirements for test specimens and moulds; German version EN 12390-1:2000, Corrigenda to DIN EN 12390-1:2001-02; German version EN 12390-1:2000/AC:2004
|
| DIN EN 12390-1-2001
|
硬化混凝土試驗.第1部分:樣品和模型形狀、尺寸和其他要求
|
Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds; German version EN 12390-1:2000
|
| DIN EN 12390-2-2001
|
硬化混凝土試驗.第2部分:強度試樣的制備和處理
|
Testing hardened concrete - Part 2: Making and curing specimens for strength tests; German version EN 12390-2:2000
|
| DIN EN 12390-3-2002
|
硬化混凝土試驗.第3部分:試樣壓縮強度
|
Testing hardened concrete - Part 3: Compressive strength of test specimens; German version EN 12390-3:2001
|
| DIN EN 12390-4-2000
|
硬化混凝土試驗.第4部分:壓縮強度.試驗機規范
|
Testing hardened concrete - Part 4: Compressive strength; Specification for testing machines; German version EN 12390-4:2000
|
| DIN EN 12390-5 Berichtigung 1-2006
|
硬化混凝土試驗.第5部分:試樣彎曲強度.DIN EN 12390-5-2001勘誤
|
Testing hardened concrete - Part 5: Flexural strength of test specimens; German version EN 12390-5:2000, Corrigenda to DIN EN 12390-5:2001-02; German version EN 12390-5:2000/AC:2004
|
| DIN EN 12390-5-2001
|
硬化混凝土試驗.第5部分:試樣結構強度
|
Testing hardened concrete - Part 5: Textural strength of test specimens; German version EN 12390-5:2000
|
| DIN EN 12390-6 Berichtigung 1-2006
|
硬化混凝土試驗.第6部分:試樣劈裂拉伸強度.DIN EN 12390-6-2001勘誤
|
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens; German version EN 12390-6:2000, Corrigenda to DIN EN 12390-6:2001-02; German version EN 12390-6:2000/AC:2004
|
| DIN EN 12390-6-2001
|
硬化混凝土試驗.第6部分:試樣劈裂拉伸強度
|
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens; German version EN 12390-6:2000
|
| DIN EN 12390-7 Berichtigung 1-2006
|
硬化混凝土試驗.第7部分:硬化混凝土密度.DIN EN 12390-7-2001勘誤
|
Testing hardened concrete - Part 7: Density of hardened concrete; German version EN 12390-7:2000, Corrigenda to DIN EN 12390-7:2001-02; German version EN 12390-7:2000/AC:2004
|
| DIN EN 12390-7-2001
|
硬化混凝土試驗.第7部分:硬化混凝土密度
|
Testing hardened concrete - Part 7: Density of hardened concrete; German version EN 12390-7:2000
|
| DIN EN 12390-8-2001
|
硬化混凝土試驗.第8部分:加壓水滲透深度
|
Testing hardened concrete - Part 8: Depth of penetration of water under pressure; German version EN 12390-8:2000
|
| DIN EN 12446-2003
|
煙囪.元部件.混凝土外壁構件
|
Chimneys - Components - Concrete outer wall elements; German version EN 12446:2003
|
| DIN EN 12504-1-2000
|
結構混凝土試驗.第1部分:起棱紋試樣.取樣、檢查和壓縮試驗
|
Testing concrete in structures - Part 1: Cored specimens; taking, examining, and testing in compression; German version EN 12504-1:2000
|
| DIN EN 12504-2-2001
|
結構混凝土試驗.第2部分:無損檢測.回彈量測定
|
Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number; German version EN 12504-2:2001
|
| DIN EN 12504-3-2005
|
結構中的混凝土試驗.第3部分:拔出力的測定
|
Testing concrete in structures - Part 3: Determination of pull-out force; German version EN 12504-3:2005
|
| DIN EN 12504-4-2004
|
結構中的混凝土試驗.第4部分:超音波脈沖速率的測定
|
Testing concrete in structures - Part 4: Determination of ultrasonic pulse velocity; German version EN 12504-4:2004
|
| DIN EN 12614-2005
|
混凝土結構物的防護和修理用產品和系統.試驗方法.聚合物玻璃化轉變溫度的測定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of glass transition temperatures of polymers; German version EN 12614:2004
|
| DIN EN 12615-1999
|
混凝土構件防護和維修產品和系統.試驗方法.斜向剪切強度測定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of slant shear strength; German version EN 12615:1999
|
| DIN EN 12617-1-2003
|
混凝土結構的保護和檢修用產品和系統.試驗方法.第1部分:聚合物和表面防護系統(SPS)線性收縮率的測定
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS); German version EN 12617-1:2003
|
| DIN EN 12617-2-2004
|
混凝土構件的保護和維修用產品和系統.試驗方法.第2部分:基于高聚物粘合劑的裂縫注入產品的收縮率
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Shrinkage of crack injection products based on polymer binder: volumetric shrinkage; German version EN 12617-2:2004
|
| DIN EN 12617-3-2002
|
混凝土構件的保護和檢修用產品和系統.試驗方法.第3部分:結構粘合劑早期壽命線性收縮率的測定; 德文版本 EN
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of early age linear shrinkage for structural bonding agents; German version EN 12617-3:2002
|
| DIN EN 12617-4-2002
|
混凝土構件的保護和檢修用產品和系統.試驗方法.第4部分:收縮率和膨脹率的測定; 德文版本 EN 12617-4:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion; German version EN 12617-4:2002
|
| DIN EN 12618-1-2003
|
混凝土結構的保護和檢修用產品和系統.試驗方法.第1部分:有限定延展性的灌漿制品的粘著性和伸長能力
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Adhesion and elongation capacity of injection products with limited ductility; German version EN 12618-1:2003
|
| DIN EN 12618-2-2004
|
混凝土結構的保護和維修用產品和系統.試驗方法.第2部分:帶或不帶熱循環的注入產品的粘性測定.抗拉粘結強度
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with or without thermal cycling - Adhesion by tensile bond strength; German version EN 12618-2:2004
|
| DIN EN 12618-3-2004
|
混凝土結構的保護和維修用產品和系統.試驗方法.第3部分:帶或不帶熱循環的注入產品的粘性測定.傾斜剪切法
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method; German version EN 12618-3:2004
|
| DIN EN 12620-2003
|
混凝土集料
|
Aggregates for concrete; German version EN 12620:2002
|
| DIN EN 12629-1-2001
|
混凝土和硅酸鹽建筑材料生產機械.安全性.第1部分:通用要求
|
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements; German version EN 12629-1:2000
|
| DIN EN 12629-2-2003
|
制造混凝土和硅酸鈣建筑產品的設備.安全.第2部分:砌塊制造機
|
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines; German version EN 12629-2:2002
|
| DIN EN 12629-3-2003
|
制造混凝土和硅酸鈣建筑產品的設備.安全.第3部分:滑動和轉盤機
|
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines; German version EN 12629-3:2002
|
| DIN EN 12629-4-2001
|
混凝土和硅酸鈣鹽構件生產機械.安全性.第4部分:屋頂瓦加工機
|
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4: Concrete roof tile making machines; German version EN 12629-4:2001
|
| DIN EN 12629-5-1-2004
|
生產混凝土和硅酸鹽建筑產品用機器.安全.第5-1部分:垂直軸的管道制造機械
|
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis; German version EN 12629-5-1:2003
|
| DIN EN 12629-5-2-2004
|
生產混凝土和硅酸鹽建筑產品用機器.安全.第5-2部分:水平軸的管道制造機械
|
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis; German version EN 12629-5-2:2003
|
| DIN EN 12629-5-3-2004
|
生產混凝土和硅酸鹽建筑產品用機器.安全.第5-3部分:管道預加應力機械
|
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines; German version EN 12629-5-3:2003
|
| DIN EN 12629-5-4-2004
|
生產混凝土和硅酸鹽建筑產品用機器.安全.第5-4部分:混凝土管道涂層機械
|
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines; German version EN 12629-5-4:2003
|
| DIN EN 12629-6-2005
|
生產混凝土和硅酸鈣建筑產品用機器.安全.第6部分:生產預制加筋產品的固定和移動設備
|
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products; German version EN 12629-6:2004
|
| DIN EN 12629-7-2004
|
生產混凝土和硅酸鹽建筑產品用機器.安全.第7部分:預應力產品的長線生產用固定和移動設備
|
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products; German version EN 12629-7:2004
|
| DIN EN 12629-8-2003
|
制造混凝土和硅酸鹽建筑產品用生產設備.安全.第8部分:制造硅酸鹽(和混凝土)建筑產品用機器和設備
|
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete); German version EN 12629-8:2002
|
| DIN EN 12636-1999
|
混凝土支撐結構防護和維修用產品和系統.試驗方法.混凝土粘結性測定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the adhesion conrete to concrete; German version EN 12636:1999
|
| DIN EN 12637-1-2004
|
混凝土結構的保護和維修用產品和系統.試驗方法.注入產品的兼容性.第1部分:與混凝土的兼容性
|
Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete; German version EN 12637-1:2004
|
| DIN EN 12637-3-2004
|
混凝土結構的保護和維修用產品和系統.試驗方法.注入產品的可混用性.第3部分:注入產品對彈性體的影響
|
Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers; German version EN 12637-3:2003
|
| DIN EN 12696-2000
|
混凝土中鋼的陰極保護
|
Cathodic protection of steel in concrete; German version EN 12696:2000
|
| DIN EN 12737-2004
|
預制混凝土產品.家畜用地板橫木
|
Precast concrete products - Floor slats for livestock; German version EN 12737:2004
|
| DIN EN 12794-2005
|
預澆鑄混凝土產品.基樁
|
Precast concrete products - Foundation piles; German version EN 12794:2005
|
| DIN EN 12839-2001
|
混凝土預制件.欄柵元件
|
Precast concrete products - Elements for fences; German version EN 12839:2001
|
| DIN EN 12843-2004
|
預制混凝土產品.桿和柱
|
Precast concrete products - Masts and poles; German version EN 12843:2004
|
| DIN EN 13055-1-2002
|
輕集料.第1部分:混凝土、灰漿和水泥漿用輕集料; 德文版本 EN 13055-1:2002
|
Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout; German version EN 13055-1:2002
|
| DIN EN 13057-2002
|
混凝土構件的保護和檢修用產品和系統.試驗方法.抗毛細管吸收性的測定; 德文版本 EN 13057:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption; German version EN 13057:2002
|
| DIN EN 13062-2003
|
混凝土結構保護和修補的產品和系統.試驗方法.增強材料保護用產品的觸變性測定
|
Products and systems for the protection and repair of concrete structure - Test method - Determination of thixotropy of products for protection of reinforcement; German version EN 13062:2003
|
| DIN EN 13084-2-2002
|
獨立式工業煙囪.第2部分:混凝土煙囪
|
Free-standing chimneys - Part 2: Concrete chimneys; German version EN 13084-2:2001
|
| DIN EN 13108-1-2006
|
瀝青混合物.材料規范.第1部分:瀝青混凝土
|
Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete; German version EN 13108-1:2006
|
| DIN EN 13108-2-2006
|
瀝青混合物.材料規范.第2部分:極薄層瀝青混凝土
|
Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers; German version EN 13108-2:2006
|
| DIN EN 13198-2003
|
預制混凝土產品.道路公共設施和花園用品
|
Precast concrete products - Street furniture and garden products; German version EN 13198:2003
|
| DIN EN 13224 Berichtigung 1-2005
|
預制混凝土制品.有筋樓板元件
|
Precast concrete products - Ribbed floor elements; German version EN 13224:2004, Corrigendum to DIN EN 13224:2004-11
|
| DIN EN 13224-2004
|
預制混凝土產品.肋構樓面組件
|
Precast concrete products - Ribbed floor elements; German version EN 13224:2004
|
| DIN EN 13225-2004
|
預鑄混凝土產品.線性結構元件
|
Precast concrete products - Linear structural elements; German version EN 13225:2004
|
| DIN EN 1323-1999
|
地磚膠粘劑.混凝土板(包括修改件A1:1998)
|
Adhesives for tiles - Concrete slab for test (includes Amendment A1:1998); German version EN 1323:1996 + A1:1998
|
| DIN EN 13230-1-2003
|
鐵路設施.軌道.混凝土枕木和支撐架.第1部分:一般要求
|
Railway applications - Track; Concrete sleepers and bearers - Part 1: General requirements; German version EN 13230-1:2002
|
| DIN EN 13230-2-2003
|
鐵路設施.軌道.混凝土枕木和支撐架.第2部分:預應力單塊枕木
|
Railway applications - Track; Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers; German version EN 13230-2:2002
|
| DIN EN 13230-3-2003
|
鐵路設施.軌道.混凝土枕木和支撐架.第3部分:加筋雙塊枕木
|
Railway applications - Track; Concrete sleepers and bearers - Part 3: Twinblock reinforced sleepers; German version EN 13230-3:2002
|
| DIN EN 13230-4-2003
|
鐵路設施.軌道.混凝土枕木和支撐架.第4部分:道岔和交叉路預應力支撐架
|
Railway applications - Track; Concrete sleepers and bearers - Part 4: Prestressed bearers for switches and crossings; German version EN 13230-4:2002
|
| DIN EN 13230-5-2003
|
鐵路設施.軌道.混凝土枕木和支撐架.第5部分:道岔和交叉路支撐架
|
Railway applications - Track; Concrete sleepers and bearers - Part 5: Special elements; German version EN 13230-5:2002
|
| DIN EN 13263-1-2005
|
混凝土用含硅煙霧.第1部分:定義、要求和合格標準
|
Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria; German version EN 13263-1:2005
|
| DIN EN 13263-2-2005
|
混凝土用含硅煙霧.第2部分:合格評價
|
Silica fume for concrete - Part 2: Conformity evaluation; German version EN 13263-2:2005
|
| DIN EN 13294-2002
|
混凝土構件的保護和檢修用產品和系統.試驗方法.固化時間的測定; 德文版本 EN 13294:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time; German version EN 13294:2002
|
| DIN EN 13295-2004
|
混凝土結構的防護和維修用產品和系統.試驗方法.抗碳化性測定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation; German version EN 13295:2004
|
| DIN EN 13369-2004
|
預制混凝土產品的通用規則
|
Common rules for precast concrete products; German version EN 13369:2004
|
| DIN EN 13375-2004
|
防水柔性薄板.車輛通行用混凝土橋板和其他混凝土表面的防水.樣品制備
|
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Specimen preparation; German version EN 13375:2004
|
| DIN EN 1338-2003
|
鋪路混凝土砌塊.要求和試驗方法
|
Concrete paving blocks - Requirements and test methods; German version EN 1338:2003
|
| DIN EN 1339-2003
|
鋪路混凝土板.要求和試驗方法
|
Concrete paving flags - Requirements and test methods; German version EN 1339:2003
|
| DIN EN 13391-2004
|
后張法預應力混凝土的機械試驗
|
Mechanical tests for post-tensioning systems; German version EN 13391:2004
|
| DIN EN 13395-1-2002
|
混凝土構件的保護和檢修用產品和系統.試驗方法.可加工性的測定.第1部分:觸變性灰漿流量試驗; 德文版本 EN 1
|
Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 1: Test for flow of thixotropic mortars; German version EN 13395-1:2002
|
| DIN EN 13395-2-2002
|
混凝土構件的保護和檢修用產品和系統.試驗方法.可加工性的測定.第2部分:水泥漿或灰漿流量試驗; 德文版本 EN
|
Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 2: Test for flow of grout or mortar; German version EN 13395-2:2002
|
| DIN EN 13395-3-2002
|
混凝土構件的保護和檢修用產品和系統.試驗方法.可加工性的測定.第3部分:維修混凝土流量試驗; 德文版本 EN 1
|
Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 3: Test for flow of repair concrete; German version EN 13395-3:2002
|
| DIN EN 13395-4-2002
|
混凝土構件維修和保護用產品和系統.試驗方法.可加工性測定.第4部分:備用泥漿的應用
|
Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 4: Application of repair mortar overhead; German version EN 13395-4:2002
|
| DIN EN 13396-2004
|
混凝土結構的防護和修理用產品和系統.試驗方法.氯離子浸入測量
|
Products and systems for the protection and repair of concrete structures - Test methods - Measurement of chloride ion ingress; German version EN 13396:2004
|
| DIN EN 1340-2003
|
混凝土路邊擋塊.要求和試驗方法
|
Concrete kerb units; Requirements and test methods; German version EN 1340:2003
|
| DIN EN 13481-2-2003
|
鐵路設施.軌道.緊固系統的性能要求.第2部分:混凝土軌枕用緊固系統
|
Railway applications - Track; Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers; German version EN 13481-2:2002
|
| DIN EN 1351-1997
|
蒸氣強化加氣混凝土彎曲強度測定
|
Determination of flexural strength of autoclaved aerated concrete; German version EN 1351:1997
|
| DIN EN 1352-1997
|
高壓蒸氣加氣混凝土和堆放多孔輕質混凝土受壓靜態彈性模數測定
|
Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1352:1996
|
| DIN EN 13529-2003
|
混凝土結構的保護和修理用產品和系統.試驗方法.耐強化學侵蝕
|
Products and systems for the protection and repair of concrete structures - Test methods - Resistance to severe chemical attack; German version EN 13529:2003
|
| DIN EN 1353-1997
|
高壓蒸氣加氣混凝土濕度測定
|
Determination of moisture content of autoclaved aerated concrete; German version EN 1353:1996
|
| DIN EN 1354-2005
|
測定透空式結構輕集料混凝土的抗壓強度
|
Determination of compressive strength of lightweight aggregate concrete with open structure; German version EN 1354:2005
|
| DIN EN 1355-1997
|
高壓蒸氣加氣混凝土和堆放多孔輕質混凝土壓應力蠕變變形測定
|
Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1355:1996
|
| DIN EN 1356-1997
|
橫向負載下高壓蒸氣加氣混凝土或堆放多孔輕質混凝土預制加強部件承載性能測定
|
Performance test for prefabricated reinforced components under transversal load of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1356:1996
|
| DIN EN 13578-2004
|
混凝土結構的保護和維修用產品和系統.試驗方法.濕混凝土的兼容性
|
Products and systems for the protection and repair of concrete structure - Test method - Compatibility on wet concrete; German version EN 13578:2003
|
| DIN EN 13579-2002
|
混凝土構件的保護和檢修用產品和系統.試驗方法.疏水性浸漬的烘干試驗; 德文版本 EN 13579:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Drying test for hydrophobic impregnation; German version EN 13579:2002
|
| DIN EN 13580-2002
|
混凝土構件的保護和檢修用產品和系統.試驗方法.疏水性浸漬的吸水率和耐堿性試驗; 德文版本 EN 13580:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Water absorption and resistance to alkali for hydrophobic impregnations; German version EN 13580:2002
|
| DIN EN 13581-2002
|
混凝土構件的保護和檢修用產品和系統.試驗方法.鹽力解凍后疏水性浸漬混凝土質量損失的測定; 德文版本 EN 13
|
Products and systems for the protection and repair of concrete structures - Test method - Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress; German version EN 13581:2002
|
| DIN EN 13584-2003
|
混凝土結構的保護和檢修用產品和系統.試驗方法.檢修產品壓縮蠕變的測定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep in compression for repair products; German version EN 13584:2003
|
| DIN EN 13596-2005
|
防水用柔性薄板.混凝土船橋甲板和其他車輛行駛的混凝土表面的防水性.粘結強度的測定
|
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of bond strength; German version EN 13596:2004
|
| DIN EN 13653-2004
|
防水用柔性薄板.車輛通行用混凝土橋板和其他混凝土表面的防水.剪切強度的測定
|
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of shear strength; German version EN 13653:2004
|
| DIN EN 13687-1-2002
|
混凝土結構保護和維修用產品和設備.試驗方法.熱相容性測定.第1部分:防凍鹽浸漬凍融循環
|
Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion; German version DIN EN 13687-1:2002
|
| DIN EN 13687-2-2002
|
混凝土結構的保護和檢修用產品和設備.試驗方法.熱相容性測定.第2部分:雷雨循環(熱沖擊)
|
Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock); German version EN 13687-2:2002
|
| DIN EN 13687-3-2002
|
混凝土結構保護和檢修用產品和設備.試驗方法.熱相容性測定.第3部分:無防凍鹽沖擊熱循環
|
Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact; German version EN 13687-3:2002
|
| DIN EN 13687-4-2002
|
混凝土結構防護和維修用產品和設備.試驗方法.熱適應性測定.第4部分:干熱循環試驗
|
Products and systems for the protection and repair of concrete structures - Test method; Determination of thermal compatibility - Part 4: Dry thermal cycling; German Version EN 13687-4:2002
|
| DIN EN 13687-5-2002
|
混凝土結構的防護和維修用產品和設備.試驗方法.熱適應性測定.第5部分:耐溫度沖擊
|
Products and systems for the protection and repair of concrete structures - Test method; Determination of thermal compatibility - Part 5: Resistance to temperature shock; German version EN 13687-5:2002
|
| DIN EN 13693-2004
|
預制混凝土產品.特殊屋頂組件
|
Precast concrete products - Special roof elements; German version EN 13693:2004
|
| DIN EN 13733-2002
|
混凝土構件的保護和檢修用產品和系統.試驗方法.結構粘結的耐用性測定; 德文版本 EN 13733:2002
|
Products and systems for the protection and repair of concrete structures - Test methods; Determination of the durability of structural bonding; German version EN 13733:2002
|
| DIN EN 13863-1-2004
|
混凝土路面.第1部分:用測量法測定混凝土路面厚度的試驗方法
|
Concrete pavements - Part 1: Test method for the determination of the thickness of a concrete pavement by survey method; German version EN 13863-1:2003
|
| DIN EN 13863-2-2004
|
混凝土路面.第2部分:層間粘結性測定的試驗方法
|
Concrete pavements - Part 2: Test method for the determination of the bond between two layers; German version EN 13863-2:2003
|
| DIN EN 13863-3-2005
|
混凝土路面.第3部分:從核心處測定混凝土路面厚度的試驗方法
|
Concrete pavements - Part 3: Test methods for the determination of the thickness of a concrete pavement from cores; German version EN 13863-3:2004
|
| DIN EN 13863-4-2005
|
混凝土路面.第4部分:測定混凝土路面對防滑釘胎耐磨性的試驗方法
|
Concrete pavements - Part 4: Test methods for the determination of wear resistance of concrete pavements to studded tyres; German version EN 13863-4:2004
|
| DIN EN 13877-1-2004
|
混凝土鋪面.第1部分:材料
|
Concrete pavements - Part 1: Materials; German version EN 13877-1:2004
|
| DIN EN 13877-2-2004
|
混凝土鋪面.第2部分:混凝土鋪面的功能要求
|
Concrete pavements - Part 2: Functional requirements for concrete pavements; German version EN 13877-2:2004
|
| DIN EN 13877-3-2005
|
混凝土路面.第3部分:混凝土路面中使用的定位銷的規范
|
Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements; German version EN 13877-3:2004
|
| DIN EN 13880-12-2003
|
熱用密封膠.第12部分:粘結試驗中混凝土試驗塊制造的試驗方法(配方法)
|
Hot applied joint sealants - Part 12: Test method for the manufacture of concrete test blocks for bond testing (recipe methods); German version EN 13880-12:2003
|
| DIN EN 13894-1-2004
|
混凝土構件的保護和維修用產品和系統.試驗方法.動態荷載下疲勞的測定.第1部分:養護期間
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 1: During cure; German version EN 13894-1:2003
|
| DIN EN 13894-2-2003
|
混凝土構件防護和維修產品和系統.試驗方法.動態載荷疲勞測定.第2部分:硬化后
|
Products and systems for the protection and repair of concrete structures - Test methods; Determination of fatigue under dynamic loading - Part 2: After hardening; German version EN 13894-2:2002
|
| DIN EN 13978-1-2005
|
預制混凝土產品.預制混凝土汽車庫.第1部分:房屋尺寸大小的整體式或單塊組成的加筋車庫的要求
|
Precast concrete products - Precast concrete garages - Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions; German version EN 13978-1:2005
|
| DIN EN 1402-4-2004
|
不定型耐火制品.第4部分:耐火混凝土一致性的測定
|
Unshaped refractory products - Part 4: Determination of consistency of castables; German version EN 1402-4:2003
|
| DIN EN 14068-2004
|
混凝土結構的防護和維修用產品和系統.試驗方法.在混凝土中不移動的情況下注漿裂紋防水性的測定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of watertightness of injected cracks without movement in concrete; German version of EN 14068:2003
|
| DIN EN 14117-2004
|
混凝土結構的保護和維修用產品和系統.試驗方法.粘性注入產品的流出時間測定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products; German version EN 14117:2004
|
| DIN EN 14223-2006
|
防水用柔性薄板.混凝土船橋甲板和其他車輛可通過的混凝土表面的防水.吸水率的測定
|
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of water absorption; German version EN 14223:2005
|
| DIN EN 14224-2006
|
防水用柔性薄板.混凝土船橋甲板和其他車輛可通過的混凝土表面的防水.斷裂橋接能力的測定.德文版本 EN 14224
|
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of crack bridging ability; German version EN 14224:2005
|
| DIN EN 14406-2004
|
混凝土結構的保護和維修用產品和系統.試驗方法.膨脹率和膨脹發展的測定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the expansion ratio and expansion evolution; German version EN 14406:2004
|
| DIN EN 14437-2005
|
屋頂用安裝的粘土或混凝土瓦的耐隆起性的測定.屋頂系統試驗方法
|
Determination of the uplift resistance of installed clay or concrete tiles for roofing - Roof system test method; German version EN 14437:2004
|
| DIN EN 14474-2005
|
預制混凝土制品.木屑做集料的混凝土.要求和試驗方法
|
Precast concrete products - Concrete with wood-chips as aggregate - Requirements and test methods; German version EN 14474:2004
|
| DIN EN 14487-1-2006
|
噴射混凝土.第1部分:定義、規范和一致性.德文版本EN 14487-1-2005
|
Sprayed concrete - Part 1: Definitions, specifications and conformity; German version EN 14487-1:2005
|
| DIN EN 14488-1-2005
|
檢測噴射混凝土.第1部分:新澆混凝土和硬化混凝土的取樣
|
Testing sprayed concrete - Part 1: Sampling fresh and hardened concrete; German version EN 14488-1:2005
|
| DIN EN 14488-4-2005
|
檢測噴射混凝土.第4部分:通過直接拉伸測定芯的粘結強度
|
Testing sprayed concrete - Part 4: Bond strength of cores by direct tension; German version EN 14488-4:2005
|
| DIN EN 14488-5-2006
|
噴射混凝土試驗.第5部分:纖維鋼筋混凝土板樣本的能量吸收能力的測定
|
Testing sprayed concrete - Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens; German version EN 14488-5:2006
|
| DIN EN 14488-7-2006
|
檢測噴射混凝土.第7部分:纖維鋼筋混凝土的纖維含量
|
Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete; German version EN 14488-7:2006 |
| DIN EN 14497-2004
|
混凝土結構的保護和維修用產品和系統.試驗方法.過濾穩定性的測定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability; German version EN 14497:2004
|
| DIN EN 14498-2004
|
混凝土結構的保護和維修用產品和系統.試驗方法.空氣干燥與儲水循環后注入產品的體積和重量的變化
|
Products and systems for the protection and repair of concrete structures - Test methods - Volume and weight changes of injection products after air drying and water storage cycles; German version EN 14498:2004
|
| DIN EN 14649-2005
|
預制混凝土產品.水泥和混凝土中玻璃纖維殘留強力的試驗方法(SIC試驗)
|
Precast concrete products - Test method for strength retention of glass fibres in cement and concrete (SIC TEST); German version EN 14649:2005
|
| DIN EN 14650-2005
|
預澆鑄混凝土產品.金屬纖維混凝土工廠生產控制通用規則
|
Precast concrete products - General rules for factory production control of metallic fibered concrete; German version EN 14650:2005
|
| DIN EN 14651-2005
|
金屬纖維混凝土試驗方法.彎曲拉伸強度的測量(比例極限,剩余)
|
Test method for metallic fibered concrete - Measuring the flexural tensile stength (limit of proportionality (LOP), residual); German version EN 14651:2005
|
| DIN EN 14691-2005
|
防水用柔性薄板.車輛可通過的混凝土船橋甲板和其他混凝土表面的防水.通過熱調節的兼容性
|
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Compatibility by heat conditioning; German version EN 14691:2005
|
| DIN EN 14692-2005
|
防水用柔性薄板.車輛可通過的混凝土船橋甲板和其他混凝土表面的防水.瀝青層耐壓實性測定
|
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the resistance to compaction of an asphalt layer; German version EN 14692:2005
|
| DIN EN 14694-2005
|
防水用柔性薄板.車輛可通過的混凝土船橋甲板和其他混凝土表面的防水.預處理產生損壞后耐動態水壓的測定
|
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of resistance to dynamic water pressure after damage by pre-treatment; German version EN 14694:2005
|
| DIN EN 14721-2005
|
金屬纖維混凝土的試驗方法.新澆混凝土和淬硬混凝土纖維含量的測量
|
Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete; German version EN 14721:2005
|
| DIN EN 1504-1-2005
|
混凝土結構的保護和修理用產品和系統.定義、要求、質量控制和合格評價.第1部分:定義
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions; German version EN 1504-1:2005
|
| DIN EN 1504-10-2004
|
混凝土結構的保護和維修用產品和系統.定義、要求、質量控制和合格評價.第10部分:產品和系統的現場應用以及
|
Products and systems for the protection and repair of concrete structures - Definitions, Requirements, Quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works; German version EN 1504-10:2003
|
| DIN EN 1504-2-2005
|
混凝土結構物的保護和修理用產品和系統.定義、要求、質量控制和合格評價.第2部分:混凝土的表面防護系統
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004
|
| DIN EN 1504-3-2006
|
混凝土結構的保護和維修用產品和系統.定義、要求、質量控制和合格評價.第3部分:結構和非結構修理.德文版本E
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair; German version EN 1504-3:2005
|
| DIN EN 1504-4-2005
|
混凝土結構的保護和維修用產品和系統.定義、要求、質量控制和合格評價.第4部分:結構粘結
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding; German version EN 1504-4:2004
|
| DIN EN 1504-5-2005
|
混凝土結構的保護和維修用產品和系統.定義、要求、質量控制和合格評價.第5部分:混凝土灌注
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection; German version EN 1504-5:2004
|
| DIN EN 1504-8-2005
|
混凝土結構的保護和維修用產品和系統.定義、要求、質量控制和合格評價.第8部分:質量控制和合格評價
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 8: Quality control and evaluation of conformity; German version EN 1504-8:2004
|
| DIN EN 1520-2003
|
透空結構的輕骨料混凝土預制增強構件（包括勘誤AC-2003)
|
Prefabricated reinforced components of lightweight aggregate concrete with open structure (includes corrigendum AC:2003); German version EN 1520:2002 + AC:2003
|
| DIN EN 1521-1996
|
巖石多孔輕質混凝土抗彎強度測定
|
Determination of flexural strength of lightweight aggregate concrete with open structure; German version EN 1521:1996
|
| DIN EN 1542-1999
|
混凝土支承結構防護和維修用產品和系統.試驗方法.通過撕裂試驗測量粘附強度
|
Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off; German version EN 1542:1999
|
| DIN EN 1543-1998
|
混凝土結構保護和修理用產品和系統.檢驗方法.聚合物抗拉強度延伸測定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of tensile strength development for polymers; German version EN 1543:1998
|
| DIN EN 1737-1998
|
蒸氣淬火氣孔混凝土或孔隙輕型混凝土預制件鋼筋混凝土墊或加固籃焊接結點斷裂剪切力測定
|
Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1737:1998
|
| DIN EN 1738-1998
|
蒸氣淬火氣孔混凝土制非承重加強部件鋼應力測定
|
Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete; German version EN 1738:1998
|
| DIN EN 1739-1998
|
結構件平面承載時蒸氣淬火氣孔混凝土預制件或堆放空隙輕型混凝土預制件之間縫隙抗剪應力測定
|
Determination of shear strength for in-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1739:1998
|
| DIN EN 1740-1998
|
主要是縱向負載作用下(垂直構件)蒸氣淬火氣孔混凝土制或堆放空隙輕型混凝土制預制加強件支承性能測定
|
Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components); German version EN 1740:1998
|
| DIN EN 1741-1998
|
負載垂直于結構件平面時蒸氣淬火氣孔混凝土制或堆放空隙輕型混凝土制預制件間縫隙抗剪應力測定
|
Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1741:1998
|
| DIN EN 1742-1998
|
蒸氣淬火氣孔混凝土制或堆放空隙輕型混凝土制多層構件層間抗剪應力測定
|
Determination of shear strength between different layers or multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1742:1998
|
| DIN EN 1766-2000
|
混凝土結構防護和修理用產品和系統.試驗方法.試驗參考混凝土.德文版本EN 1766-2000
|
Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing; German version EN 1766:2000
|
| DIN EN 1767-1999
|
混凝土支承結構維修用產品和系統.試驗方法.紅外線分析
|
Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis; German version EN 1767:1999
|
| DIN EN 1770-1998
|
混凝土支撐結構防護和維修用產品和系統.試驗方法.熱膨脹系數測定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion; German version EN 1770:1998
|
| DIN EN 1771 Berichtigung 1-2006
|
混凝土結構的保護和修復用產品和系統.試驗方法.使用沙柱試驗測定可注入性.對DIN EN 1771-2004的勘誤
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability using the sand column test; German version EN 1771:2004, Corrigenda to DIN EN 1771:2004-11; German version EN 1771:2004/AC:2005
|
| DIN EN 1771-2004
|
混凝土結構的保護和修復用產品和系統.試驗方法.使用沙柱試驗測定可注入性
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability and splitting test; German version EN 1771:2004
|
| DIN EN 1799-1999
|
混凝土支承結構防護和維修用產品和系統.檢驗方法.混凝土表面用膠粘劑合格檢驗
|
Products and systems for the protection and repair of concrete structures - Test methods - Tests to measure the suitability of structural bonding agents for application to concrete surface; German version EN 1799:1998
|
| DIN EN 1857 Berichtigung 1-2006
|
煙囪.部件.混凝土燃燒內襯.德文版本EN 1857-2003對DIN EN 1857-2003-11勘誤
|
Chimneys - Components - Concrete flue liners; German version EN 1857:2003, Corrigenda to DIN EN 1857:2003-11; German version EN 1857:2003/AC:2005
|
| DIN EN 1857-2003
|
煙囪.元部件.混凝土煙道內襯
|
Chimneys - Components - Concrete flue liners; German version EN 1857:2003
|
| DIN EN 1858-2003
|
煙囪.元件.混凝土煙道磚
|
Chimneys - Components - Concrete flue blocks; German version EN 1858:2003
|
| DIN EN 1877-1-2000
|
混凝土結構保護和維修用產品和系統.試驗方法.與環氧樹脂相關的活性函數.第1部分:環氧基當量測定
|
Products and systems for the protection and repair of concrete structures - Test methods; Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent; German version EN 1877-1:2000
|
| DIN EN 1877-2-2000
|
混凝土結構保護和維修用產品和系統.試驗方法.與環氧樹脂相關的活性成分.第2部分:通過總堿值測定氨成分
|
Products and systems for the protection and repair of concrete structures - Test methods; Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number; German version EN 1877-2:2000
|
| DIN EN 1916-2003
|
未加筋、鋼纖維和加筋混凝土管和配件
|
Concrete pipes and fittings, unreinforced, steel fibre and reinforced; German version EN 1916:2002
|
| DIN EN 1917-2003
|
未加筋和加鋼筋混凝土人孔和檢驗室
|
Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced; German version EN 1917:2002
|
| DIN EN 1992-1-1-2005
|
歐洲法規2.混凝土結構設計.第1-1部分:一般規則和建筑規則
|
Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings; German version EN 1992-1-1:2004
|
| DIN EN 1994-1-1-2006
|
歐洲法規4:復合鋼和混凝土結構的設計.第1-1部分:建筑規則和通用規則
|
Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings; German version EN 1994-1-1:2004
|
| DIN EN 1994-2-2006
|
歐洲法規4:復合鋼和混凝土結構的設計.第2部分:橋梁通用規則和規則
|
Eurocode 4: Design of composite steel and concrete structures - Part 2: General rules and rules for bridges; German version EN 1994-2:2005
|
| DIN EN 206-1-2001
|
混凝土.第1部分:規范、性能、生產和符合性
|
Concrete - Part 1: Specification, performance, production and conformity; German version EN 206-1:2000
|
| DIN EN 206-1/A1-2004
|
混凝土.第1部分:規范、性能、生產及合格性
|
Concrete - Part 1: Specification, performance, production and conformity; German version EN 206-1:2000/A1:2004
|
| DIN EN 206-1/A2-2005
|
混凝土.第1部分:規范、性能、生產及合格性
|
Concrete - Part 1: Specification, performance, production and conformity; German version EN 206-1:2000/A2:2005
|
| DIN EN 40-4-2006
|
燈柱.第4部分:鋼筋混凝土和預應力混凝土燈柱的要求
|
Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns; German version EN 40-4:2005
|
| DIN EN 40-9-1984
|
照明燈柱.增強的和預應力混凝土照明燈柱的特殊要求
|
Lighting columns; special requirements for reinforced and prestressed concrete lighting columns
|
| DIN EN 413-1-2004
|
圬工混凝土.第1部分:組成、規范和合格標準
|
Masonry cement - Part 1: Composition, specifications and conformity criteria; German version EN 413-1:2004
|
| DIN EN 450-1-2005
|
混凝土用飛灰.第1部分:定義、規范和合格標準
|
Fly ash for concrete - Part 1: Definition, specifications and conformity criteria; German version EN 450-1:2005
|
| DIN EN 450-2-2005
|
混凝土用飛灰.第2部分:合格評定
|
Fly ash for concrete - Part 2: Conformity evaluation; German version EN 450-2:2005
|
| DIN EN 480-1-1998
|
混凝土、灰漿和壓緊灰漿摻和物.試驗方法.第10部分:水溶氯化物含量測定
|
Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing; German version EN 480-1:1997
|
| DIN EN 480-10-1997
|
混凝土、灰漿和壓緊灰漿摻和物.試驗方法.第10部分:水溶氯化物含量測定
|
Admixtures for concrete, mortar and grout - Test methods - Part 10: Determination of water soluble chloride content; German version EN 480-10:1996
|
| DIN EN 480-11-2005
|
混凝土、灰漿和灌漿混合料.試驗方法.第11部分:固化混凝土中氣隙特性的測定
|
Admixtures for concrete, mortar and grout - Test methods - Part 11: Determination of air void characteristics in hardened concrete; German version EN 480-11:2005
|
| DIN EN 480-12-2005
|
混凝土、灰漿和灌漿混合料.試驗方法.第12部分:混合料堿含量的測定
|
Admixtures for concrete, mortar and grout - Test methods - Part 12: Determination of the alkali content of admixtures; German version EN 480-12:2005
|
| DIN EN 480-13-2002
|
混凝土、灰漿和水泥漿混合料.檢驗方法.第13部分:檢驗灰漿混合料用基準石工灰漿; 德文版本 EN 480-13:2002
|
Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures; German version EN 480-13:2002
|
| DIN EN 480-4-2006
|
混凝土、灰漿和灌漿用填加劑.試驗方法.第4部分:混凝土的滲液測定
|
Admixtures for concrete, mortar and grout - Test methods - Part 4: Determination of bleeding of concrete; German version EN 480-4:2005
|
| DIN EN 480-5-2005
|
混凝土、灰漿和灌漿用混合料.試驗方法.第5部分:毛細管吸水測定
|
Admixtures for concrete, mortar and grout - Test methods - Part 5: Determination of capillary absorption; German version EN 480-5:2005
|
| DIN EN 480-6-2005
|
混凝土、灰漿和灌漿用混合料.試驗方法.第6部分:紅外線分析
|
Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis; German version EN 480-6:2005
|
| DIN EN 480-8-1997
|
混凝土、灰漿和壓緊灰漿摻和物.試驗方法第8部分:普通干燥劑含量測定
|
Admixtures for concrete, mortar and grout - Test methods - Part 8: Determination of the conventional dry material content; German version EN 480-8:1996
|
| DIN EN 491-2005
|
屋頂層和墻壁覆面用混凝土屋面瓦及配件.試驗方法
|
Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods; German version EN 491:2004
|
| DIN EN 492-2006
|
纖維混凝土石板及配件.產品規范和試驗方法
|
Fibre-cement slates and fittings - Product specification and test methods; German version EN 492:2004 + A1:2005
|
| DIN EN 512-1994
|
纖維混凝土制品.承壓管和連接件
|
Fibre-cement products - Pressure pipes and joints; German version EN 512:1994
|
| DIN EN 60745-2-12-2004
|
手持式電動工具.安全.第2-12部分:混凝土振搗器的特殊要求
|
Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators (IEC 60745-2-12:2003); German version EN 60745-2-12:2003
|
| DIN EN 634-1-1995
|
混凝土粘結木屑板.規范.第1部分:一般要求
|
Cement-bonded particleboards - Specifications - Part 1: General requirements; German version EN 634-1:1995
|
| DIN EN 634-2-1996
|
混凝土粘結碎料板.要求.第2部分:干燥、潮濕和室外環境中使用的混凝土粘結碎料板要求
|
Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and exterior conditions; German version EN 634-2:1996
|
| DIN EN 639-1994
|
包括管接頭和配件的混凝土承壓管通用要求
|
Common requirements for concrete pressure pipes, including joints and fittings; German version EN 639:1994
|
| DIN EN 640-1994
|
包括管連接件和配件的分段加固(無外皮)鋼筋混凝土承壓管和混凝土承壓管
|
Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings; German version EN 640:1994
|
| DIN EN 641-1994
|
包括管連接件和配件帶薄板套的鋼筋混凝土承壓管
|
Reinforced concrete pressure pipes, cylinder type, including joints and fittings; German version EN 641:1994
|
| DIN EN 642-1994
|
帶和不帶薄板套的預應力混凝土承壓管:包括管連接件、配件以及管用預應力鋼特殊要求
|
Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes; German version EN 642:1994
|
| DIN EN 678-1994
|
經熱壓處理的加氣混凝土干密度測定
|
Determination of the dry density of autoclaved aerated concrete; German version EN 678:1993
|
| DIN EN 679-2005
|
高壓蒸養加氣混凝土抗壓強度測定
|
Determination of the compressive strength of autoclaved aerated concrete; German version EN 679:2005
|
| DIN EN 680-2006
|
高壓蒸養加氣混凝土干燥收縮的測定.德文版本EN 680-2005
|
Determination of the drying shrinkage of autoclaved aerated concrete; German version EN 680:2005
|
| DIN EN 771-3-2005
|
圬工單位規范.第3部分:集料混凝土圬工單位(密實和輕質集料)
|
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates); German version EN 771-3:2003 + A1:2005
|
| DIN EN 771-4-2005
|
圬工單位規范.第4部分:高壓蒸氧加氣混凝土圬工單位
|
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units; German version EN 771-4:2003 + A1:2005
|
| DIN EN 772-10-1999
|
磚石試驗方法.第10部分:氣孔混凝土磚石和石灰砂石含濕量測定
|
Methods of test for masonry units - Part 10: Determination of moisture content of calcium silicate and autoclaved aerated concrete units; German version EN 772-10:1999
|
| DIN EN 772-11-2004
|
砌塊的試驗方法.第11部分:集料混凝土、高壓蒸養加氣混凝土、人造石和天然石砌塊因毛細作用的吸水率及粘土砌
|
Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units (includes amendment A1:2004); German version EN 772-11:2000 + A1:2004
|
| DIN EN 772-14-2002
|
圬工品試驗方法.第14部分:集料混凝土和人造石圬工品濕度變形測定
|
Methods of test for masonry units - Part 14: Determination of moisture movement of aggregate concrete and manufactured stone masonry units; German version EN 772-14:2001
|
| DIN EN 772-15-2000
|
圬工品試驗方法.第15部分:高壓蒸汽加氣混凝土圬工品水蒸汽滲透率測定
|
Methods of test for masonry units - Part 15: Determination of water vapour permeability of autoclaved aerated concrete masonry units; German version EN 772-15:2000
|
| DIN EN 772-6-2002
|
圬工品試驗方法.第6部分:集料混凝土圬工品彎曲拉伸強度測定
|
Methods of test for masonry units - Part 6: Determination of bending tensile strength of aggregate concrete masonry units; German version EN 772-6:2001
|
| DIN EN 934-2-2002
|
混凝土、灰漿和灌漿添加劑.第2部分:混凝土添加劑.定義、要求、符合性、標記和標簽
|
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures; Definitions, requirements, conformity, marking and labelling; German version EN 934-2:2001
|
| DIN EN 934-2/A1-2005
|
混凝土、灰漿和灌漿用添加劑.混凝土添加劑.第2部分:定義、要求、合格性、標記和標簽
|
Admixtures for concrete, mortar and grout - Concrete admixtures - Part 2: Definitions, requirements, conformity, marking and labelling; German version EN 934-2:2001/A1:2004
|
| DIN EN 934-2/A2-2006
|
混凝土、砂漿和灌漿用添加劑.第2部分:混凝土添加劑.定義、要求、合格性、標記和標簽.德文版本EN 934-2-2001
|
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling; German version EN 934-2:2001/A2:2005
|
| DIN EN 934-3 Berichtigung 1-2006
|
混凝土、灰漿和灌漿添加劑.第3部分:灰漿添加劑.定義、要求、一致性、標記和標簽
|
Admixtures for concrete, mortar and grout - Part 3: Admixtures for mortar - Definitions, requirements, conformity, marking and labelling; German version EN 934-3:2004, Corrigenda to DIN EN 934-3:2004-03; German version EN 934-3:2003/AC:2005
|
| DIN EN 934-3-2004
|
混凝土、砂漿和灰漿用外加劑.第3部分:砂漿外加劑.定義、要求、一致性、標記和貼標簽
|
Admixtures for concrete, mortar and grout - Part 3: Admixtures for mortar - Definitions, requirements, conformity, marking and labelling; German version EN 934-3:2003
|
| DIN EN 934-4-2002
|
混凝土、灰漿和灌漿添加劑.第4部分:預應力鋼筋束灌漿添加劑.定義、要求、符合性、標記和標簽
|
Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons; Definitions, requirements, conformity, marking and labelling; German version EN 934-4:2001
|
| DIN EN 934-4/A1-2005
|
混凝土、灰漿和灌漿用添加劑.預應力鋼筋束用灌漿添加劑.第4部分:定義、要求、合格性、標記和標簽
|
Admixtures for concrete, mortar and grout - Admixtures for grout for prestressing tendons - Part 4: Definitions, requirements, conformity, marking and labelling; German version EN 934-4:2001/A1:2004
|
| DIN EN 934-6-2006
|
混凝土、灰漿和灌漿添加劑.第6部分:抽樣、合格控制和合格評定
|
Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity; German version EN 934-6:2001 + A1:2005
|
| DIN EN 989-1995
|
鋼筋和熱壓充氣混凝土膠合性能的"推出"試驗法測定
|
Determination of the bond behaviour between reinforcing bars and autoclaved aerated concrete by the "Push Out" test; German version EN 989:1995
|
| DIN EN 990-2003
|
熱壓加氣混凝土和多孔結構輕質集料混凝土鋼筋防蝕試驗方法
|
Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure; German version EN 990:2002
|
| DIN EN 991-1995
|
熱壓充氣混凝土或多孔結構輕質集料混凝土預制鋼筋構件尺寸測定
|
Determination of the dimensions of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 991:1995
|
| DIN EN 992-1995
|
多孔結構輕質集料混凝土干密度測定
|
Determination of the dry density of lightweight aggregate concrete with open structure; German version EN 992:1995
|
| DIN EN ISO 15630-1-2002
|
混凝土的鋼筋和預應力用鋼.試驗方法.第1部分:加筋棒材、絲桿材和絲材 (ISO 15630-1:2002); 德文版本 EN ISO
|
Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bar, wire rod and wire (ISO 15630-1:2002); German version EN ISO 15630-1:2002
|
| DIN EN ISO 15630-2-2002
|
混凝土的鋼筋和預應力用鋼.試驗方法.第2部分:焊接構件 (ISO 15630-2:2002); 德文版本 EN ISO 15630-2:2002
|
Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric (ISO 15630-2:2002); German version EN ISO 15630-2:2002
|
| DIN EN ISO 15630-3-2002
|
混凝土的鋼筋和預應力用鋼.試驗方法.第3部分:預應力鋼 (ISO 15630-3:2002); 德文版本 EN ISO 15630-3:2002
|
Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steels (ISO 15630-3:2002); German version EN ISO 15630-3:2002
|
| DIN EN ISO 3766-2004
|
建筑工程制圖.鋼筋混凝土的簡化畫法
|
Construction drawings - Simplified representation of concrete reinforcement (ISO 3766:2003); German version EN ISO 3766:2003
|
| DIN EN ISO 7783-2-1999
|
涂料和清漆.外部磚石工程和混凝土用涂覆材料和涂覆系統.第2部分:水蒸氣滲透率測定和分類
|
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 2: Determination and classification of water-vapour transmission rate (permeability) (ISO 7783-2:1999); German version EN ISO 7783-2:1999
|
| DIN V 1201-2004
|
排水和污水用未加筋的、鋼纖維的和加筋的混凝土管和配件.1型和2型.要求、試驗方法和合格評定
|
Concrete pipes and fittings, unreinforced, steel fibre and reinforced for drains and sewers - Type 1 and Type 2 - Requirements, test methods and evaluation of conformity
|
| DIN V 18026-2006
|
符合DIN EN 1504-2-2005的混凝土產品用表面保護系統
|
Surface protection systems for concrete products according to DIN EN 1504-2:2005-01
|
| DIN V 18151-100-2005
|
輕質混凝土空心砌塊.第100部分:具有特殊性能的空心砌塊
|
Lightweight concrete hollow blocks - Part 100: Hollow blocks with specific properties
|
| DIN V 18152-100-2005
|
輕質混凝土實心磚和砌塊.第100部分:具有特殊性能的實心磚和砌塊
|
Lightweight concrete solid bricks and blocks - Part 100: Solied bricks and blocks with specific properties
|
| DIN V 18153-100-2005
|
混凝土砌塊(標準重量混凝土).第100部分:具有特殊性能的砌塊
|
Concrete masonry units (Normal-weight concrete) - Part 100: Masonry units with specific properties
|
| DIN V 18197-2005
|
用水密封的混凝土接縫的密封
|
Sealing of joints in concrete with water stops
|
| DIN V 18800-5-2004
|
鋼結構.第5部分:鋼和混凝土的復合結構.設計和建造
|
Steel structures - Part 5: Composite structures of steel and concrete - Design and construction
|
| DIN V 18998/A1-2003
|
根據DIN EN 934系列標準評定混凝土添加劑腐蝕性.修改件A1
|
Assessment corrosion behaviour of admixtures the series DIN EN 934; Amendment A1
|
| DIN V 20000-100-2002
|
建筑物用建筑產品的應用.第100部分:符合DIN EN 934-2:2002-02的混凝土混合物
|
Application of building products in structures - Part 100: Concrete admixtures according DIN EN 934-2:2002-02
|
| DIN V 20000-403-2005
|
結構物中建筑產品的應用.第403部分:符合DIN EN 771-3-2005的集料混凝土砌塊的應用規則
|
Application of building products in structures - Part 403: Rules for the application of aggregate concrete masonry units according to DIN EN 771-3:2005-05
|
| DIN V 20000-404-2006
|
建筑物內建筑產品的應用.第404:依照DIN EN 771-4-2005-05高壓蒸養加氣混凝土砌塊的應用規則
|
Application of building products in structures - Part 404: Rules for the application of autoclaved aerated concrete masonry units according to DIN EN 771-4:2005-05
|
| DIN V 25459-1990
|
核電站用加筋和預應力混凝土外殼
|
Reinforced and prestressed concrete containment for nuclear power plants
|
| DIN V 4034-1-2004
|
排水和污水用未加筋的、鋼纖維和加筋的預制混凝土人孔.1型和2型.第1部分:要求、試驗方法和合格評定
|
Prefabricated concrete manholes, unreinforced, steel fibre and reinforced for drains and sewers - Type 1 and Type 2 - Part 1: Requirements, test methods and evaluation of conformity
|
| DIN V 4165-100-2005
|
高壓蒸養加氣混凝土砌塊.第100部分:具有特殊性能的高精度砌塊和元件
|
Autoclaved aerated concrete masonry units - Part 100: High precision units and elements with specific properties
|
| DIN V ENV 1170-8-1996
|
玻璃纖維混凝土試驗方法.第8部分:氣侯循環試驗
|
Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test; German version prENV 1170-8:1996
|
| DIN V ENV 13381-3-2003
|
測定結構構件耐火作用的試驗方法.第3部分:混凝土構件應用的保護方法
|
Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members; German version ENV 13381-3:2002
|
| DIN V ENV 13381-5-2003
|
測定結構構件耐火作用的試驗方法.第5部分:混凝土/壓型鋼板組合構件應用的保護方法
|
Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite members; German version ENV 13381-5:2002
|
| DIN V ENV 13381-6-2003
|
測定結構件耐火作用的試驗方法.第6部分:混凝土填充空心鋼柱的應用保護方法
|
Test methods for determining the contribution to fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns; German version ENV 13381-6:2002
|
| DIN V ENV 1504-9-2001
|
混凝土結構的保護和修復用產品和系統.定義、要求、質量管理和一致性評價.第1部分:產品和系統使用的一般原理
|
Products and systems for the protection and repair of concrete structures - Definitons, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems; German version ENV 1504-9:1997
|
| DIN V ENV 1992-2-1997
|
歐洲法規2.鋼筋混凝土及預應力混凝土支撐結構的設計.第2部分:混凝土橋
|
Eurocode 2: Design of concrete structures - Part 2: Concrete bridges; German version ENV 1992-2:1996
|
| DIN-Fachbericht 92-2000
|
國家應用文獻(NAD).DIN V ENV 1992-1-2-1997的應用準則.歐洲法規2:鋼筋混凝土支撐結構的計劃.第1-2部分:通
|
()
|
| DIN-Fachbericht 94-2000
|
國家應用文獻(NAD).DIN V ENV 1994-1-2-1997的應用準則.歐洲法規4:鋼、混凝土組合支撐結構的測量和建造.第1
|
()
|
| 編號 | 中文名稱 | 英文名稱 |
|---|