| 編號 | 中文名稱 | 英文名稱 |
|---|
| ISO 10144-1991
|
鋼筋混凝土用鋼筋和線材的認證方案
|
Certification scheme for steel bars and wires for the reinforcement of concrete structures
|
| ISO 10544-1992
|
鋼筋混凝土和制造焊接網用冷軋鋼絲
|
Cold-reduced steel wire for the reinforcement of concrete and the manufacture of welded fabric
|
| ISO 11082-1992
|
鋼筋混凝土結構用焊接網認證方案
|
Certification scheme for welded fabric for the reinforcement of concrete structures
|
| ISO 14654-1999
|
鋼筋混凝土用環氧樹脂涂層鋼
|
Epoxy-coated steel for the reinforcement of concrete
|
| ISO 14655-1999
|
預應力混凝土用環氧樹脂涂層鋼絞線
|
Epoxy-coated strand for the prestressing of concrete
|
| ISO 14656-1999
|
鋼筋混凝土用環氧樹脂涂層鋼的環氧樹脂粉末和密封材料
|
Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete
|
| ISO 14657-2005
|
混凝土鋼筋用鍍鋅鋼
|
Zinc-coated steel for the reinforcement of concrete
|
| ISO 15630-1-2002
|
混凝土的鋼筋和預應力用鋼.試驗方法.第1部分:加筋棒、鋼絲桿和鋼絲
|
Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire
|
| ISO 15630-2-2002
|
混凝土的鋼筋和預應力用鋼.試驗方法.第2部分:焊接纖維
|
Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric
|
| ISO 15630-3-2002
|
混凝土的鋼筋和預應力用鋼.試驗方法.第3部分:預應力鋼
|
Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel
|
| ISO 15673-2005
|
建筑物結構加筋混凝土的簡易設計指南
|
Guidelines for the simplified design of structural reinforced concrete for buildings
|
| ISO 16020-2005
|
混凝土加筋和預應力用鋼.詞匯
|
Steel for the reinforcement and prestressing of concrete - Vocabulary
|
| ISO 18650-1-2004
|
建筑施工機械和設備.混凝土攪拌機.第1部分:詞匯和一般規范
|
Building construction machinery and equipment - Concrete mixers - Part 1: Vocabulary and general specifications
|
| ISO 18650-2-2006
|
建筑施工機械和設備.混凝土攪拌機.第2部分:攪拌功效檢查程序
|
Building construction machinery and equipment - Concrete mixers - Part 2: Procedure for examination of mixing efficiency |
| ISO 18652-2005
|
房屋建筑機械和設備.混凝土用外部振搗器
|
Building construction machinery and equipment - External vibrators for concrete
|
| ISO 1920-1-2004
|
混凝土試驗.第1部分:新澆混凝土的取樣
|
Testing of concrete - Part 1: Sampling of fresh concrete
|
| ISO 1920-2-2005
|
混凝土試驗.第2部分:新澆混凝土特性
|
Testing of concrete - Part 2: Properties of fresh concrete
|
| ISO 1920-3-2004
|
混凝土試驗.第3部分:試驗樣品的制備和養護
|
Testing of concrete - Part 3: Making and curing test specimens
|
| ISO 1920-4-2005
|
混凝土試驗.第4部分:硬化混凝土的強度
|
Testing of concrete - Part 4: Strength of hardened concrete
|
| ISO 1920-5-2004
|
混凝土試驗.第5部分:硬化混凝土的特性(強度除外)
|
Testing of concrete - Part 5: Properties of hardened concrete other than strength
|
| ISO 1920-6-2004
|
混凝土試驗.第6部分:混凝土芯的取樣、制備和試驗
|
Testing of concrete - Part 6: Sampling, preparing and testing of concrete cores
|
| ISO 1920-7-2004
|
混凝土試驗.第7部分:硬化混凝土的無損試驗
|
Testing of concrete - Part 7: Non-destructive tests on hardened concrete
|
| ISO 19338 Technical Corrigendum 1-2004
|
結構混凝土設計標準的功效和評定要求.技術勘誤1
|
Performance and assessment requirements for design standards on structural concrete; Technical Corrigendum 1
|
| ISO 19338-2003
|
結構混凝土設計標準的功效和評定要求
|
Performance and assessment requirements for design standards on structural concrete
|
| ISO 21573-1-2006
|
建筑施工機械和設備.混凝土泵.第1部分:技術和工業規范
|
Building construction machinery and equipment - Concrete pumps - Part 1: Terminology and commercial specifications
|
| ISO 21592-2006
|
建筑物建造機械和設備.混凝土噴霧器.技術和工業規范
|
Building construction machinery and equipment - Concrete spraying machines - Terminology and commercial specifications
|
| ISO 3766-2003
|
建筑工程制圖.混凝土加筋的簡化畫法
|
Construction drawings - Simplified representation of concrete reinforcement
|
| ISO 3893-1977
|
混凝土 按抗壓強度的分級
|
Concrete; Classification by compressive strength
|
| ISO 4103-1979
|
混凝土 按稠度的分級
|
Concrete; Classification of consistency
|
| ISO 4635-1982
|
硫化橡膠 混凝土公路伸縮縫用預成型壓縮密封件 材料規范
|
Rubber, vulcanized; Preformed compression seals for use between concrete motorway paving sections; Specification for material
|
| ISO 6274-1982
|
混凝土 集料的篩分析
|
Concrete; Sieve analysis of aggregates
|
| ISO 6782-1982
|
混凝土集料 堆積密度的測定
|
Aggregates for concrete; Determination of bulk density
|
| ISO 6783-1982
|
混凝土的粗集料 顆粒密度和吸水率測定 液體天平法
|
Coarse aggregates for concrete; Determination of particle density and water absorption; Hydrostatic balance method
|
| ISO 6784-1982
|
混凝土 受壓靜力彈性模量測定
|
Concrete; Determination of static modulus of elasticity in compression
|
| ISO 6934-1-1991
|
預應力混凝土用鋼 第1部分:一般要求
|
Steel for the prestressing of concrete; part 1: general requirements
|
| ISO 6934-2-1991
|
預應力混凝土用鋼 第2部分:冷拔鋼絲
|
Steel for the prestressing of concrete; part 2: cold-drawn wire
|
| ISO 6934-3-1991
|
預應力混凝土用鋼 第3部分:淬火回火鋼絲
|
Steel for the prestressing of concrete; part 3: quenched and tempered wire
|
| ISO 6934-4 Technical Corrigendum 1-1992
|
預應力混凝土用鋼 第4部分:鋼絞線 技術勘誤1
|
Steel for the prestressing of concrete - Part 4: Strand - Technical corrigendum 1
|
| ISO 6934-4 Technical Corrigendum 2-2000
|
預應力混凝土用鋼 第4部分:鋼絞線 技術勘誤2
|
Steel for the prestressing of concrete - Part 4: Strand; Technical corrigendum 2
|
| ISO 6934-4-1991
|
預應力混凝土用鋼 第4部分:鋼絞線
|
Steel for the prestressing of concrete; part 4: strand
|
| ISO 6934-5-1991
|
預應力混凝土用鋼 第5部分:需連續處理或無需處理熱軋鋼筋
|
Steel for the prestressing of concrete; part 5: hot-rolled steel bars with or without subsequent processing
|
| ISO 6935-1-1991
|
鋼筋混凝土用鋼 第1部分:光面鋼筋
|
Steel for the reinforcement of concrete; part 1: plain bars
|
| ISO 6935-2-1991
|
鋼筋混凝土用鋼 第2部分:帶肋鋼筋
|
Steel for the reinforcement of concrete; part 2: ribbed bars
|
| ISO 6935-3 Technical Corrigendum 1-2000
|
鋼筋混凝土用鋼 第3部分:焊接鋼筋網 技術勘誤1
|
Steel for the reinforcement of concrete - Part 3: Welded fabric; Technical Corrigendum 1
|
| ISO 6935-3-1992
|
鋼筋混凝土用鋼 第3部分:焊接鋼筋網
|
Steel for the reinforcement of concrete; part 3: welded fabric
|
| ISO 7033-1987
|
混凝土的細集料和粗集料 表觀密度和吸水率的測定 比重瓶法
|
Fine and coarse aggregates for concrete; Determination of the particle mass-per-volume and water absorption; Pycnometer method
|
| ISO 7728-1985
|
一塊預制普通混凝土外墻構件和一塊混凝土樓板之間的典型水平接縫 性能、特征和分類準則
|
Typical horizontal joints between an external wall of prefabricated ordinary concrete components and a concrete floor; Properties. characteristics and classification criteria
|
| ISO 7729-1985
|
兩塊預制普通混凝土外墻構件之間的典型垂直接縫 性能、特征和分類準則
|
Typical vertical joints between two prefabricated ordinary concrete external wall components; Properties, characteristics and classification criteria
|
| ISO 7783-2-1999
|
色漆和清漆 外部磚石工程和混凝土用涂覆材料和涂覆體系 第2部分:水蒸氣滲透率的測定和分類
|
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 2: Determination and classification of water-vapour transmission rate (permeability)
|
| ISO 7844-1985
|
鋼筋混凝土大板間,有連接筋并用混凝土澆灌的鍵槽式垂直接縫 實驗室力學試驗 切向荷載的影響
|
Grooved vertical joints with connecting bars and concrete infill between large reinforced concrete panels; Laboratory mechanical tests; Effect of tangential loading
|
| ISO 7845-1985
|
承重墻和混凝土樓板之間的水平接縫 實驗室力學試驗 由樓板傳來的垂直荷載和彎矩的影響
|
Horizontal joints between load-bearing walls and concrete floors; Laboratory mechanical tests; Effect of vertical loading and of moments transmitted by the floors
|
| ISO 9882-1993
|
建筑物的性能標準 預制混凝土樓板的性能試驗在非集中荷載下的工況
|
Performance standards in building; performance test for precast concrete floors; behaviour under non-concentrated load
|
| ISO 9883-1993
|
建筑物的性能標準 預制混凝土樓板的性能試驗 在集中荷載下的工況
|
Performance standards in building; performance test for precast concrete floors; behaviour under concentrated load
|
| 編號 | 中文名稱 | 英文名稱 |
|---|