| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 1727-1987 | 電瓶驅動的車輛用電機規范 | Specification for motors for battery operated vehicles |
| BS 2G 124-1-1966 | 飛機交流發電機規范.恒定頻率 | Specification for a.c. generators for aircraft - Constant frequency |
| BS 2G 124-2-1966 | 飛機交流發電機規范.第2部分:變頻 | Specification for a.c. generators for aircraft - Variable frequency |
| BS 2G 134-1970 | 直流發電機規范 | Specification for d.c. generators |
| BS 2G 147-1-1966 | 飛機交流電機規范.三相恒頻鼠籠式感應電機 | Specification for a.c. motors for aircraft - Three-phase constant frequency squirrel-cage induction motors |
| BS 4999-103-2004 | 旋轉電機的一般要求.符號規范 | General requirements for rotating electrical machines - Specification for symbols |
| BS 4999-140-1987 | 旋轉電機一般要求.第140部分:交流同步發電機電壓調節和并聯運行規范 | General requirements for rotating electrical machines - Specification for voltage regulation and parallel operation of a.c. synchronous generators |
| BS 4999-145-1987 | 旋轉電機一般要求.第145部分:繞組出線端規范 | General requirements for rotating electrical machines - Specification for winding terminations |
| BS 4999-147-1988 | 旋轉電機的一般要求.電機電刷及刷握的尺寸規范 | General requirements for rotating electrical machines - Specification for dimensions of brushes and brush-holders for electrical machinery |
| BS 5000-11-1973 | 特種或專用旋轉電機.第11部分:小功率電動機和發電機 | Specification for rotating electrical machines of particular types or for particular applications - Small-power electric motors and generators |
| BS 5000-3-2006 | 特種或專用旋轉電機規范.往復式內燃機驅動發電機.對抗振動要求 | Rotating electrical machines of particular types or for particular applications - Part 3: Generators to be driven by reciprocating internal combustion engines - Requirements for resistance to vibration |
| BS 5000-50-1982 | 特種或專用旋轉電機.第50部分:燃油器電動機尺寸 | Specification for rotating electrical machines of particular types or for particular applications - Dimensions for oil burner motors |
| BS 5415-1-1985 | 電機驅動的工商業洗滌機安全性.第1部分:一般要求規范 | Safety of electrical motor-operated industrial and commercial cleaning appliances - Specification for general requirements |
| BS 7698-10-1999 | 往復式內燃機驅動交流發電機組.用包絡表面法對空氣中噪音進行測定 | Reciprocating internal combustion engine driven alternating current generating sets - Measurement of airborne noise by the enveloping surface method |
| BS 7698-7-1996 | 往復式內燃機驅動的交流發電機組.規范和設計的技術申報 | Reciprocating internal combustion engine driven alternating current generating sets - Technical declarations for specification and design |
| BS 7698-8-1996 | 往復式內燃機驅動的交流發電機組.低功率發電機組要求和試驗 | Reciprocating internal combustion engine driven alternating current generating sets - Requirements and tests for low-power generating sets |
| BS 7698-9-1996 | 往復式內燃機驅動的交流發電機組.機械振動的測量和評估 | Reciprocating internal combustion engine driven alternating current generating sets - Measurement and evaluation of mechanical vibrations |
| BS 822-6-2004 | 電機和電器的終端標記.旋轉電機的鉛色 | Terminal markings for electrical machinery and apparatus - Lead colours for rotating electrical machinery |
| BS AU 227-1988 | 商用車輛和公共汽車交流發電機圓軸端頭和輪轂尺寸規范 | Specification for dimensions of cylindrical shaft ends and hubs for alternators for commercial vehicles and buses |
| BS AU 232-1989 | 裝有調節器的道路車輛交流發電機的試驗和一般要求方法 | Methods of test and general requirements for road vehicle alternators with regulators |
| BS AU 250-1993 | 商業車輛和公共汽車1、2和3 型交流發電機安裝尺寸規范 | Specification for mounting dimensions of alternators, types 1, 2 and 3 for commercial vehicles and buses |
| BS DD CLC/TS 60034-18-34-2000 | 旋轉電機.絕緣結構功能性評定.固定繞組試驗規程.絕緣結構的熱機耐受強度評定 | Rotating electrical machines - Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems |
| BS DD CLC/TS 60034-20-1-2004 | 旋轉電機.控制電動機.步進電動機 | Rotating electrical 60034-20-1:2004) machines - Part 20-1: Control motors - Stepping motors |
| BS DD IEC TS 60034-20-1-2002 | 旋轉電機.控制電動機.步進電動機 | Rotating electrical machines - Control motors - Stepping motors |
| BS DD IEC/TS 60034-17-2006 | 旋轉電機.從轉爐反饋時的殼體感應馬達.應用指南 | Rotating electrical machines - Cage induction motors when fed from converters - Application guide |
| BS DD IEC/TS 62257-7-2008 | 農村電氣化用農村混合系統的小型可再生能源和混合系統的推薦.發電機 | Recommendations for small renewable energy and hybrid systems for rural hybrid systems for rural electrification - Generators |
| BS DD IEC/TS 62257-7-3-2008 | 農村電氣化用小型可再生能源和混合系統的推薦.發電機組.農村電氣化系統用發電機組的選擇 | Recommendations for small renewable energy and hybrid systems for rural electrification - Generator set - Selection of generator sets for rural electrification systems |
| BS EN 12601-2001 | 往復式內燃引擎驅動的發電機組.安全性 | Reciprocating internal combustion engine driven generating sets - Safety |
| BS EN 45510-2-5-2002 | 電站設備的采購指南.電氣設備.電機 | Guide for the procurement of power station equipment - Electrical equipment - Motors |
| BS EN 45510-2-6-2000 | 發電站設備采購指南.電氣設備.發電機.第6節:發電機 | Guide for the procurement of power station equipment - Electrical equipment - Generators |
| BS EN 50260-1-2002 | 手持電池動力的電機驅動工具和電池組的安全性.一般要求 | Safety of hand-held battery-powered motor-operated tools and battery packs - General requirements |
| BS EN 50260-2-7-2002 | 手持電池動力的電機驅動工具和電池組的安全性.噴槍的特殊要求 | Safety of hand-held battery-powered motor-operated tools and battery packs - Particular requirements for spray guns |
| BS EN 50438-2007 | 與公共低壓分配網絡平行的微型發電機的連接要求 | Requirements for the connection of micro-generators in parallel with public low-voltage distribution networks |
| BS EN 60027-4-2007 | 電氣技術用字母符號.旋轉電機 | Letter symbols to beused in electrictechnology —Part 4: Rotating electric machines |
| BS EN 60034-1-2004 | 旋轉電機.第1部分:額定值和性能 | Rotating electrical machines - Part 1: Rating and performance |
| BS EN 60034-11-2004 | 旋轉電機.第11部分:熱防護 | Rotating electrical machines-Part 11:Thermal protection |
| BS EN 60034-12-2002 | 旋轉電機.單速三相籠型感應電動機的起動性能 | Rotating electrical machines - Starting performance of single-speed three-phase cage induction motors |
| BS EN 60034-14-2004 | 旋轉電機.第14部分:軸高等于和大于56mm的特定機械的機械振動.振動強度的測量、評估和極限值 | Rotating electricalmachines —Part 14: Mechanical vibration of certainmachines with shaft heights 56 mm andhigher — Measurement, evaluation andlimits of vibration severity |
| BS EN 60034-15-1996 | 旋轉電機.第15部分:耐用線圈架繞線定子線圈交流旋轉電機電平的脈沖電壓 | Rotating electrical machines - Impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils |
| BS EN 60034-15-2009 | 旋轉電機.第15部分:耐用線圈架繞線定子線圈交流旋轉電機電平的脈沖電壓 | Rotating electrical machines - Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines |
| BS EN 60034-16-1-1992 | 旋轉電機.同步電機勵磁系統.定義 | Rotating electrical machines - Excitation systems for synchronous machines - Definitions |
| BS EN 60034-18-1-1994 | 旋轉電機.絕緣系統功能評定.通用導則 | Rotating electrical machines - Functional evaluation of insulation systems - General guidelines |
| BS EN 60034-18-21-1994 | 旋轉電機.絕緣系統功能評定.線繞繞組試驗程序.熱評定和分類 | Rotating electrical machines - Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification |
| BS EN 60034-18-22-2001 | 旋轉電機.絕緣系統功能評價.金屬線繞組試驗程序.絕緣元件替代物和更改的分類 | Rotating electrical machines - Functional evaluation of insulation systems - Test procedures for wire-wound windings - Classification of changes and insulation component substitutions |
| BS EN 60034-18-31-1994 | 旋轉電機.第18部分:絕緣系統功能評定.第31節:模繞繞組試驗程序.用于50MVA、15kV以下(包括50MVA和15kV)的機 | Rotating electrical machines - Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in machines up to and including 50 MVA and 15 KV |
| BS EN 60034-2-1-2007 | 旋轉電機.第2-1部分:(不包括牽引車輛用電機)試驗中損失和功效的測定用標準方法 | Rotating electrical machines. Part 2-1: Standard methods fordetermining losses and efficiency fromtests (excluding machines for tractionvehicles) |
| BS EN 60034-2-1999 | 旋轉電機.旋轉電機械的損耗和效率的試驗測定方法(不包括牽引車輛用電機) | Rotating electrical machines - Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) |
| BS EN 60034-22-1998 | 旋轉電機.往復式內燃機(RIC)引擎驅動交流發電機. | Rotating electrical machines - A.C. generators for reciprocating internal combustion (RIC) engine driven generating sets |
| BS EN 60034-26-2006 | 旋轉電機.第26部分:非平衡電壓對三相鼠籠式電動機性能的影響 | Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors |
| BS EN 60034-28-2007 | 旋轉電機.三相低壓鼠籠式感應電動機等效電路圖數量測定的試驗方法 | Rotating electricalmachines —Part 28: Test methods for determiningquantities of equivalent circuitdiagrams for three-phase low-voltagecage induction motors |
| BS EN 60034-29-2008 | 旋轉電機.等效加載和迭加技術.測定溫升的間接試驗 | Rotating electrical machines -Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise |
| BS EN 60034-3-2005 | 旋轉電機.第3部分:鼓形轉子同步機的特殊要求 | Rotating electrical machines — Part 3: Specific requirements for cylindrical rotor synchronous machines |
| BS EN 60034-4-2008 | 旋轉電機.通過試驗測定同步機參量的方法 | Rotating electrical machines - Methods for determining synchronous machine quantities from tests |
| BS EN 60034-5-2001 | 旋轉電機.旋轉電機總體設計提供的防護級別.分級 | Rotating electrical machines - Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification |
| BS EN 60034-6-1994 | 旋轉電機.第6部分:冷卻方法 | Rotating electrical machines - Methods of cooling (IC Code) |
| BS EN 60034-7-1993 | 旋轉電機.第7部分:結構和安裝配置類型分類(IM代碼) | Rotating electrical machines - Classification of types of constructions and mounting arrangements (IM Code) |
| BS EN 60034-8-2007 | 旋轉電機.終端標志和旋轉方向 | Rotating electricalmachines —Part 8: Terminal markings anddirection of rotation |
| BS EN 60034-9-2005 | 旋轉電機.噪音極限值 | Rotating electricalmachines —Part 9: Noise limits |
| BS EN 60349-1-2000 | 鐵路用途.鐵路與公路車輛用旋轉電機.用于除電子變換器饋電交流電動機之外的機器 | Railway applications - Rotating electrical machines for rail and road vehicles - Machines other than electronic convertor-fed alternating current motors |
| BS EN 60349-2-2001 | 鐵路設施.鐵路和公路車輛用旋轉電機.電子變流器饋電交流電動機 | Railway applications - Rotating electrical machines for rail and road vehicles - Electronic convertor-fed alternating current motors |
| BS EN 60512-20-2-2001 | 電子設備用電機元件.基本試驗程序和測量方法.試驗20b.易燃試驗.耐火性.第2節:試驗20b.耐火性 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Test 20b - Flammability tests - Fireproofness - Section 2: Test 20b - Fireproofness |
| BS EN 60512-23-3-2001 | 電子設備用電機元件.基本試驗程序和測量方法.試驗23c.連接件和附件的屏蔽效應 | Connectors for electronic equipment - Tests and measurements - Test 23c - Shielding effectiveness of connectors and accessories |
| BS EN 60601-2-7-1998 | 醫用電氣設備.安全性專門要求.X射線診斷裝置的高壓發電機規范 | Medical electrical equipment - Particular requirements for safety - Specification for high voltage generators of diagnostic X-ray generators |
| BS EN 60947-8-2003 | 低壓開關設備和控制設備.旋轉電機用內置式熱保護(PTC)控制裝置 | Low-voltage switchgear and controlgear - Control units for built-in thermal protection (PTC) for rotating electrical machines |
| BS EN 61029-2-1-2002 | 可移動的電機控制工具的安全性.圓盤鋸工作臺的特殊要求 | Safety of transportable motor-operated tools - Particular requirements for circular saw benches |
| BS EN 61029-2-5-2002 | 可移動的電機控制工具的安全性.帶鋸的特殊要求 | Safety of transportable motor-operated tools - Particular requirements for band saws |
| BS EN 61400-11-2003 | 風力渦輪發電機系統.噪音測量技術 | Wind turbine generator systems - Acoustic noise measurement techniques |
| BS EN 61558-2-6-2009 | 小于1100V供電電壓用變壓器、電抗器、供電機組及類似設備的安全性.安全隔離變壓器及含有安全隔離變壓器的供 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V. Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
| BS EN 61811-50-2002 | 電機“全有或全無”繼電器.分規范.經質量評定的機電"全有或全無"電信繼電器 | Electromechanical all-or-nothing relays - Sectional specification - Electromechanical all-or-nothing telecom relays of assessed quality |
| BS EN 61811-51-2002 | 電機的"全有或全無”繼電器.空白詳細規范.經質量評定的機電的"全有或全無"電信繼電器.非標準化的形式和結構 | Electromechanical all-or-nothing relays - Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Non-standardized types and construction |
| BS EN 61811-53-2002 | 電機的"全有或全無"繼電器.空白詳細規范.經質量評定的機電的"全有或全無"電信繼電器.14 mm x 9 mm 基座的雙 | Electromechanical all-or-nothing relays - Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 14 mm x 9 mm base |
| BS EN 61986-2002 | 旋轉電機.等效加載和過定位技術.測定溫升的間接試驗 | Rotating electrical machines - Equivalent loading and super-position techniques - Indirect testing to determine temperature rise |
| BS EN 62047-1-2006 | 半導體裝置.微型電機裝置.術語和定義 | Semiconductor devices - Micro-electromechanical devices - Terms and definitions |
| BS EN 88528-11-2004 | 往復式內燃機驅動交流發電機組.旋轉不間斷電力系統.性能要求和試驗方法 | Reciprocating internal combustion engine driven alternating current generating sets - Rotary uninterruptible power systems - Performance requirements and test methods |
| BS EN ISO 1680-2000 | 聲學.旋轉電機發出的空氣噪聲的測量試驗規范 | Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machinery |
| BS IEC 60092-301-2002 | 船上電氣裝置.設備.發電機和電動機 | Electrical installation in ships - Equipment - Generators and motors |
| BS IEC TS 60034-18-34-2000 | 旋轉電機.絕緣系統的功能評定.模繞線圈的試驗程序.絕緣系統的熱機耐久性評定 | Rotating electrical machines - Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems |
| BS ISO 10816-2-2009 | 機械振動.通過在非旋轉部件上的測量評價機械振動.功率超過50MW,額定轉速為1500 r/min、1800 r/min、3000 r/ | Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min |
| BS ISO 7919-2-2009 | 機械振動.通過在旋轉軸上的測量評價機械振動.功率超過50 MW、額定轉速在1500 r/min、1800 r/min、3000 r/mi | Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min |
| BS ISO 8528-1-2006 | 往復式內燃機驅動的交流發電機組.應用、額定功率和性能 | Reciprocating internal combustion engine driven alternating current generating sets - Application, ratings and performance |
| BS ISO 8528-3-2006 | 往復式內燃機驅動的交流發電裝置.發電機組的交流發電機 | Reciprocating internal combustion engine driven alternating current generating sets - Alternating current generators for generating sets |
| BS PAS 67-2008 | 主要用于加熱住所的導熱協同發電機加熱和電氣性能測定用實驗室試驗 | Laboratory tests to determine the heating and electrical performance of heat-led micro-cogeneration packages primarily intended for heating dwellings |
| DD ENV 61400-1-1995 | 風力渦輪發電機系統.第1部分:安全性要求 | Wind turbine generator systems. Safety requirements |
| 編號 | 中文名稱 | 英文名稱 |