| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 2/1533/CD-2008 | IEC/TS 60034-20-2:旋轉電機.第20-2部分:無刷永磁電機用工作特性和試驗規范 | IEC/TS 60034-20-2: Rotating electrical machines - Part 20-2: Performance characteristics and testing specifications for brushless permanent magnet motors |
| IEC 2/1540/CD-2009 | IEC/TS 60034-18-34:旋轉電機.第18-34:絕緣系統功能評估.成型繞組的試驗程序.絕緣系統的熱機耐久性評估 | IEC/TS 60034-18-34: Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems |
| IEC 60027-4-2006 | 電氣技術用字母符號.第4部分:旋轉電機 | Letter symbols to be used in electrical technology - Part 4: Rotating electric machines |
| IEC 60034-1-2010 | 旋轉電機.第1部分:額定功率與性能 | Rotating electrical machines - Part 1: Rating and performance |
| IEC 60034-11-2004 | 旋轉電機.第11部分:熱防護 | Rotating electrical machines - Part 11: Thermal protection |
| IEC 60034-12 AMD 1-2007 | 旋轉電機.第12部分:單速三相籠型感應電動機的起動性能.修改件1 | Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors; Amendment 1 |
| IEC 60034-12 Edition 2.1-2007 | 旋轉電機.第12部分:單速三相籠型感應電動機的起動性能 | Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors |
| IEC 60034-14 AMD 1-2007 | 旋轉電機.第14部分:軸中心高≥56mm固定機械的機械振動.振動激烈性測量、評估和限度.修改件1 | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity; Amendment 1 |
| IEC 60034-14 Edition 3.1-2007 | 旋轉電機.第14部分:軸高≥56mm 固定機械的機械振動.測量、評定和振動極限 | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity |
| IEC 60034-14-2003 | 旋轉電機.第14部分:軸中心高56mm及以上的電機機械振動.振動強度的測量、評價和限值 | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher; Measurement, evaluation and limits of vibration severity |
| IEC 60034-15-2009 | 旋轉電機.第15部分:帶定子成型線圈的交流旋轉電機的脈沖電壓耐受等級 | Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines |
| IEC 60034-16-1 Corrigendum 1-1992 | 旋轉電機.第16部分:同步機勵磁系統.第1章:定義.技術勘誤1 | Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Chapter 1: Definitions; Corrigendum 1 |
| IEC 60034-16-1-1991 | 旋轉電機.第16部分:同步電機勵磁系統.第1章:定義 | Rotating electrical machines; part 16: excitation systems for synchronous machines; chapter 1: definitions |
| IEC 60034-16-2-1991 | 旋轉電機.第16部分:同步電機勵磁系統.第2章:電力系統研究模型 | Rotating electrical machines; part 16: excitation systems for synchronous machines; chapter 2: models for power system studies |
| IEC 60034-18-1 AMD 1-1996 | 旋轉電機 第18部分:絕緣結構功能性評定 第1節:總指南 修改1 | Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 1: General guidelines; Amendment 1 |
| IEC 60034-18-1 Corrigendum 1-1992 | 旋轉電機用絕緣系統的功能評估.第1部分:一般指南.技術勘誤1 | Functional evaluation of insulation systems for rotating electrical machines - Part 1: General guidelines; Corrigendum 1 |
| IEC 60034-18-1-1992 | 旋轉電機 第18部分:絕緣結構功能性評定 第1節:總指南 | Functional evaluation of insulation systems for rotating electrical machines; part 1: general guidelines |
| IEC 60034-18-21 AMD 1-1994 | 旋轉電機 第18部分:絕緣結構功能性評定 第21節:散繞組試驗規程 熱評定和分級 修改1 | Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 21: Test procedures for wire-wound windings; Thermal evaluation and classification; Amendment 1 |
| IEC 60034-18-21 AMD 2-1996 | 旋轉電機 第18部分:絕緣結構功能性評定 第21節:散繞組試驗規程 熱評定和分級 修改2 | Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 21: Test procedures for wire-wound windings - Thermal evaluation and classification; Amendment 2 |
| IEC 60034-18-21-1992 | 旋轉電機 第18部分:絕緣結構功能性評定 第21節:散繞組試驗規程 熱評定和分級 | Rotating electrical machines; part 18: functional evaluation of insulation systems; section 21: test procedures for wire-wound windings; thermal evaluation and classification |
| IEC 60034-18-22-2000 | 旋轉電機絕緣結構功能性評定.散繞組試驗規程.變更和絕緣組分替代的分級 | Functional evaluation of insulation systems for rotating electrical machines - Test procedures for wire-wound windings - Classification of changes and insulation component substitutions |
| IEC 60034-18-31 AMD 1-1996 | 旋轉電機 第18部分:絕緣結構功能性評定 第31節:成型繞組的試驗規程 50MVA、15kV及以下電機的絕緣結構的熱評 | Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 31: Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in machines up to and including 50 MVA and 15 kV; Amendment 1 |
| IEC 60034-18-31-1992 | 旋轉電機絕緣結構功能性評定.成型繞組試驗規程.50MVA、15kV及以下電機絕緣結構熱評定和分級 | Functional evaluation of insulation systems for rotating electrical machines - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in machines up to and including 50 MVA and 15 kV |
| IEC 60034-18-32-1995 | 旋轉電機絕緣結構功能性評定.成型繞組試驗規程.50MVA、15kV及以下電機絕緣結構電評定 | Functional evaluation of insulation systems for rotating electrical machines - Test procedures for form-wound windings - Electrical evaluation of insulation systems used in machines up to and including 50 MVA and 15 kV |
| IEC 60034-18-33-1995 | 旋轉電機絕緣結構功能性評定 成型饒組試驗規程 多因子功能性評定50MVA、15kV及以下電機絕緣結構熱、電綜合 | Rotating electrical machines - Functional evaluation of insulation systems - Test procedures for form-wound windings - Multifactor functional evaluation - Endurance under combined thermal and electrical stresses of insulation systems used in machines up to and including 50 MVA and 15kV |
| IEC 60034-18-34-2000 | 旋轉電機絕緣結構功能性評定 成型繞組試驗規程 絕緣結構熱機械耐久性評定 | Rotating electrical machine - Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems |
| IEC 60034-19-1995 | 普通電源或整流電源供電直流電機的特殊試驗方法 | Specific test methods for d. c. machines on conventional and rectifier-fed supplies |
| IEC 60034-2-1-2007 | 旋轉電機.第2-1部分:試驗(不包括牽引車輛用電機)中損失和功效的測定用標準方法 | Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) |
| IEC 60034-22-2009 | 旋轉電機.第22部分:往復式內燃機驅動的發電機組用交流發電機 | Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets |
| IEC 60034-23-2003 | 旋轉電機整修規范 | Rotating electrical machines - Part23:Specification for the refurbishing of rotating electrical machines |
| IEC 60034-26-2006 | 旋轉電機.第26部分:不平衡電壓對三相感應發動機性能的影響 | Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase induction motors |
| IEC 60034-28-2007 | 旋轉電機.第28部分:低壓三相鼠籠型感應電動機等效電路圖數量測定的試驗方法 | Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors |
| IEC 60034-29-2008 | 旋轉電機.第29部分:等效加載和迭加技術.測定溫升的間接試驗 | Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise |
| IEC 60034-2A-1974 | 旋轉電機 第2部分:旋轉電機損耗和效率的試驗測定方法(不包括牽引車輛用電機) 補充1:用量熱法測定損耗 | Rotating electrical machines; part 2: methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicules); first supplement: measurement of losses by the calorimetric method |
| IEC 60034-3-2007 | 旋轉電機.第3部分:用蒸汽渦輪機或燃?xì)鉁u輪機驅動的同步發電機用特殊需求 | Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines |
| IEC 60034-30-2008 | 旋轉電機.第30部分:單速三相鼠籠式感應電動機的有效等級(IE編碼) | Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage induction motors (IE code) |
| IEC 60034-4-2008 | 旋轉電機.第4部分:試驗中同步電機參數的測定用方法 | Rotating electrical machines - Part 4: Methods for determining synchronous machine quantities from tests |
| IEC 60034-5 AMD 1-2006 | 旋轉電機.第5部分:旋轉電機整體設計防護等級(IP代碼).分類.修改件1 | Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code); Classification; Amendment 1 |
| IEC 60034-5 Corrigendum 1-2001 | 旋轉電機.第5部分:旋轉電機整體設計防護等級(IP代碼).分類 | Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code); Classification |
| IEC 60034-5 Edition 4.1-2006 | 旋轉電機.第5部分:旋轉電機整體設計防護等級(IP代碼).分類 | Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification |
| IEC 60034-5-2000 | 旋轉電機整體結構的防護等級(IP代碼).分級 | Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code); Classification |
| IEC 60034-6-1991 | 旋轉電機 第6部分:冷卻方法(IC代號) | Rotating electrical machines; part 6: methods of cooling (IC code) |
| IEC 60034-7 AMD 1-2000 | 旋轉電機 第7部分:結構型式的分類、安裝布置和接線盒位置(IM)代號 修改1 | Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code); Amendment 1 |
| IEC 60034-7 Edition 2.1-2001 | 旋轉電機.第7部分:結構類型分類、安裝方法和終端接線盒位置 | Rotating electrical machines - Part 7: Classification of types of constructions, mounting arrangements and terminal box position (IM code) |
| IEC 60034-7-1992 | 旋轉電機 第7部分:結構型式的分類和安裝布置(IM代號) | Rotating electrical machines; part 7: classification of types of constructions and mounting arrangements (IM code) |
| IEC 60034-7-2001 | 旋轉電機結構型式、安裝型式接線盒的位置的分類(IM代碼) | Rotating electrical machines--Classification of types of construction,mounting arrangements and terminal box position for (IM Code) |
| IEC 60034-8-2007 | 旋轉電機.第8部分:終端標志和旋轉方向 | Rotating electrical machines - Part 8: Terminal markings and direction of rotation |
| IEC 60034-9 AMD 1-2007 | 旋轉電機.第9部分:噪聲限值.修改件1 | Rotating electrical machines - Part 9: Noise limits; Amendment 1 |
| IEC 60034-9 Edition 4.1-2007 | 旋轉電機.第9部分:噪聲限值 | Rotating electrical machines - Part 9: Noise limits |
| IEC 60034-9-2003 | 旋轉電機.第9部分:噪聲限值 | Rotating electrical machines - Part 9: Noise limits |
| IEC 60034-9-2007 | 旋轉電機噪聲測定方法及限值 第３部分：噪聲限值 | Measurement of airborne noise emitted by rotating electrical machines and the noise limits -Part 3:Noise limits |
| IEC 60050-411-1996 | 國際電工詞匯 第411章:旋轉電機 | International Electrotechnical Vocabulary - Chapter 411: Rotating machines |
| IEC 60050-415-1999 | 國際電工詞匯 第415部分:風輪發電機系統 | International Electrotechnical Vocabulary - Part 415: Wind turbine generator systems |
| IEC 60072-1-1991 | 旋轉電機的尺寸及功率等級 第1部分:機座號:56～400、凸緣號:55～1080 | Dimensions and output series for rotating electrical machines; part 1: frame numbers 56 to 400 and flange numbers 55 to 1080 |
| IEC 60072-2-1990 | 旋轉電機的尺寸及功率等級 第2部分:機座號:355～1000、凸緣號:1180～2360 | Dimensions and output series for rotating electrical machines; part 2: frame numbers 355 to 1000 and flange numbers 1180 to 2360 |
| IEC 60072-3-1994 | 旋轉電機的尺寸及功率等級 第3部分:內裝式小功率電機、凸緣號:BF10～BF50 | Dimensions and output series for rotating electrical machines; part 3: small built-in motors; flange numbers BF10 to BF50 |
| IEC 60092-301 AMD 1-1994 | 船舶電氣設施 第301部分:設備 發電機和電動機 修改1 | Electrical installations in ships - Part 301: Equipment - Generators and motors; Amendment 1 |
| IEC 60092-301 AMD 2-1995 | 船舶電氣設施 第301部分:設備 發電機和電動機 修改2 | Electrical installations in ships - Part 301: Equipment - Generators and motors; Amendment 2 |
| IEC 60092-301-1980 | 船舶電氣設施 第301部分:設備 發電機和電動機 | Electrical installations in ships. Part 301 : Equipment - Generators and motors |
| IEC 60136 AMD 1-1995 | 電機用電刷和刷握尺寸 修改1 | Dimensions of brushes and brush-holders for electrical machinery; Amendment 1 |
| IEC 60136-1986 | 電機用電刷和刷握尺寸 | Dimensions of brushes and brush-holders for electrical machinery |
| IEC 60335-2-64-2002 | 家用及類似用途電器的安全.第2-64部分:商用炊事電機械的特殊要求 | Household and similar electrical appliances - Safety - Part 2-64: Particular requirements for commercial electric kitchen machines |
| IEC 60349-1 AMD 1-2002 | 電力牽引.鐵路與道路車輛用旋轉電機.第1部分:除電子交流器供電的交流電動機之外的旋轉電機.修改1 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors; Amendment 1 |
| IEC 60349-1 Edition 1.1-2002 | 電力牽引.鐵路與道路車輛用旋轉電機.第1部分:除電子變流器供電的交流電動機之外的旋轉電機 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors |
| IEC 60349-1-1999 | 電力牽引 鐵路與道路車輛用旋轉電機 第1部分:除電子變流器供電的交流電動機之外的旋轉電機 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors |
| IEC 60349-2-2002 | 電力牽引.鐵路與道路車輛用旋轉電機.第2部分:電子變流器供電的交流電動機 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic convertor-fed alternating current motors |
| IEC 60364-5-55 AMD 1-2001 | 建筑物的電氣設施 第5部分:電氣設備的選擇和安裝 第55章:其他設備 第551節:低壓發電機組 修改1 | Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment; Other equipment; Amendment 1 |
| IEC 60413-1972 | 測定電機用電刷材料物理性能試驗規程 | Test procedures for determining physical properties of brush materials for electrical machines |
| IEC 60512-23-3 Corrigendum 1-2003 | 電子設備用電機元件.基本測試程序和測量方法.第23-3部分:試驗23c:連接器和附件的屏蔽效果 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories |
| IEC 60512-23-3-2000 | 電子設備用電機元件.基本試驗程序和測量方法.第23-3部分:試驗23c.連接件和附屬件的屏蔽效應 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories |
| IEC 60560-1977 | 電機用刷握的定義和術語 | Definitions and terminology of brush-holders for electrical machines |
| IEC 60842-1988 | 氫冷式渦輪同步電機的使用與運行導則 | Guide for application and operation of turbine-type synchronous machines using hydrogen as a coolant. |
| IEC 60894 Corrigendum 1-1987 | 電機繞組線圈和線棒損耗角正切測量的試驗程序指南 | Guide for a test procedure for the measurement of loss tangent of coils and bars for machine windings; Corrigendum 1 |
| IEC 60947-8 AMD 1-2006 | 低壓開關和控制設備.第8部分:旋轉電機用嵌入式熱保護(PTC)控制裝置 | Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines; Amendment 1 |
| IEC 60947-8 Edition 1.1-2006 | 低壓開關和控制設備.第8部分:旋轉電機用嵌入式熱保護(PTC)控制裝置 | Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines |
| IEC 60947-8-2003 | 低壓開關設備和控制設備.第8部分:旋轉電機用嵌入式熱保護控制裝置 | Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines |
| IEC 61400-11 AMD 1-2006 | 風輪發電機系統.第11部分:噪音測量技術.修改件1 | Wind turbine generator systems - Part 11: Acoustic noise measurement techniques; Amendment 1 |
| IEC 61400-11 Edition 2.1-2006 | 風輪發電機系統.第11部分:噪音測量技術 | Wind turbine generator systems - Part 11: Acoustic noise measurement techniques |
| IEC 61400-11-2002 | 風輪發電機系統.第11部分:噪音測量技術 | Wind turbine generator systems - Part 11: Acoustic noise measurement techniques |
| IEC 62047-4-2008 | 半導體裝置.微電機裝置.第4部分:MEMS用總規范 | Semiconductor devices - Micro-electromechanical devices - Part 4: Generic specifications for MEMS |
| IEC 62047-6-2009 | 半導體裝置.微電機裝置.第6部分:薄膜材料的軸向疲勞試驗方法 | Semiconductor devices - Micro-electromechanical devices - Part 6: Axial fatigue testing methods of thin film materials |
| IEC 88528-11-2004 | 往復式內燃機驅動交流發電機組.第11部分:旋轉的不間斷電力系統.性能要求和試驗方法 | Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods |
| IEC 9/1135/CD-2008 | 電力牽引.鐵路和道路車輛用旋轉電機.第3部分:用組件損耗總和測定變流器供電交流電動機的總損耗 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of converter-fed alternating current motors by summation of the component losses |
| IEC/PAS 62072-2005 | 旋轉電機用天然石墨刷.基本特性 | Natural graphite brush for rotating electrical machinery - Basic characteristics |
| IEC/PAS 62515-2007 | 關于CAx系統中電機和電氣應用之間協同工作能力的要求 | Requirements concerning the interoperability between electromechanical and electrical applications in CAx-systems |
| IEC/TR 60638-1979 | 牽引用旋轉電機換向的評定和確定等級準則 | Criteria for assessing and coding of the commutation of rotating electrical machines for traction |
| IEC/TR 60785-1984 | 電動汽車用旋轉電機 | Rotating machines for electric road vehicles |
| IEC/TR 61015-1990 | 電機用刷握 施加于電刷的靜壓力的測量指南 | Brush-holders for electrical machines; guide to the measurement of the static thrust applied to brushes |
| IEC/TR 61400-24-2002 | 風力渦輪機發電機系統.第24部分:避雷裝置 | Wind turbine generator systems - Part 24: Lightning protection |
| IEC/TR2 60034-16-2-1991 | 旋轉電機.第16部分:同步電機勵磁系統.第2章:動力系統研究模型 | Rotating electrical machines; part 16: excitation systems for synchronous machines; chapter 2: models for power system studies |
| IEC/TR2 60034-16-3-1996 | 旋轉電機 第16部分:同步電機勵磁系統 第3節:動態性能 | Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Section 3: Dynamic performance |
| IEC/TR2 60034-18-32-1995 | 旋轉電機 第18部分:絕緣結構的功能性評定 第32節:成型繞組試驗規程 50MVA、15kV及以下電機絕緣結構的電氣評 | Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 32: Test procedures for form-wound windings - Electrical evaluation of insulation systems used in machines up to and including 50 MVA and 15 kV |
| IEC/TR2 60034-18-33-1995 | 旋轉電機 第18部分:絕緣結構的功能性評定 第33節:成型繞組試驗規程 多因素功能性評定 50MVA、15kV及以下電 | Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 33: Test procedures for form-wound windings - Multifactor functional evaluation - Endurance under thermal and electrical stresses of insulation systems used in machines up to and including 50 MVA and 15 kV |
| IEC/TR2 60349-3-1995 | 電力牽引 鐵路和道路車輛用旋轉電機 第3部分:用組件損耗總和確定變流器供電的交流電動機的總損耗 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of convertor-fed alternating current motors by summation of the component losses |
| IEC/TS 60034-17-2006 | 旋轉電機.第17部分:變頻供電的籠型感應電動機.應用指南 | Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide |
| IEC/TS 60034-18-34-2000 | 旋轉電機 第18-34部分:絕緣結構功能性評定 成型繞組試驗規程 絕緣結構的熱機耐受強度評定 | Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems |
| IEC/TS 60034-18-41-2006 | 旋轉電機.第18-41部分:電壓轉換的旋轉電機中用I型電絕緣系統評價和性能試驗 | Rotating electrical machines - Part 18-41: Qualification and type tests for Type I electrical insulation systems used in rotating electrical machines fed from voltage converters |
| IEC/TS 60034-18-42-2008 | 旋轉電機.第18-42部分:電壓轉換器饋電的旋轉電機用抗局部放電電氣絕緣系統(II型)的鑒定和驗收試驗 | Rotating electrical machines - Part 18-42: Qualification and acceptance tests for partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters |
| IEC/TS 60034-20-1-2002 | 旋轉電機.第20-1部分:控制發動機.步進馬達 | Rotating electrical machines - Part 20-1: Control motors; Stepping motors |
| IEC/TS 60034-23-2003 | 旋轉電機.第23部分:旋轉電機的整修規范 | Rotating electrical machines - Part 23: Specification for the refurbishing of rotating electrical machines |
| IEC/TS 60034-24-2009 | 旋轉電機.第24部分:在線探測和診斷旋轉電機和軸承電流的有源部件的可能缺陷.應用指南 | Rotating electrical machines - Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents - Application guide |
| IEC/TS 60034-25-2007 | 旋轉電機.第25部分:專為變頻電源設計的交流電動機的設計和性能指南 | Rotating electrical machines - Part 25: Guidance for the design and performance of a.c. motors specifically designed for converter supply |
| IEC/TS 60034-27-2006 | 旋轉電機.第27部分:在旋轉電機絕緣子繞組上的局部離線放電測量 | Rotating electrical machines - Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines |
| IEC/TS 61400-13-2001 | 風輪發電機系統 第13部分：機械負載的測量 | Wind turbine generator systems - Part 13: Measurement of mechanical loads |
| IEC/TS 61400-23-2001 | 風輪發電機系統 第23部分：轉子葉片的全尺寸比例結構試驗 | Wind turbine generator systems - Part 23: Full-scale structural testing of rotor blades |
| IEC/TS 62257-7-1-2006 | 農村電氣化用小型可再生能源和混合系統的建議.第7-1部分:發電機.光電部署 | Recommendations for small renewable energy and hybrid systems for rural electrification - Part 7-1: Generators - Photovoltaic arrays |
| IEC/TS 62257-7-2008 | 農村電氣化用小型可再生能源和混合系統的建議.第7部分:發電機 | Recommendations for small renewable energy and hybrid systems for rural electrification - Part 7: Generators |
| ISO 10816-2-2009 | 機械振動.通過在非旋轉部件上的測量評價機械振動.第2部分:功率超過50MW,額定轉速為1500 r/min、1800 r/min | Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min |
| ISO 1680-1999 | 聲學 測定旋轉式電機發射的空氣聲的試驗規程 | Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines |
| ISO 7650 AMD 1-2001 | 商用車輛和公共汽車 1、2、3和4型起動電機的裝配尺寸 修改1 | Commercial vehicles and buses - Mounting dimensions for starter motors of types 1, 2, 3 and 4; Amendment 1 |
| ISO 7650-1987 | 商用車輛和公共汽車 1、2、3和4型起動電機的裝配尺寸 | Commercial vehicles and buses; Mounting dimensions for starter motors of types 1, 2, 3 and 4 |
| ISO 7651-1991 | 商用車輛和公共汽車 1、2、3型交流發電機安裝尺寸 | Commercial vehicles and buses; mounting dimensions for alternators of types 1, 2 and 3 |
| ISO 7919-2-2009 | 機械振動.通過在旋轉軸上的測量評價機械振動.第2部分:功率超過50MW、額定轉速在1500r/min、1800 r/min、300 | Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min |
| ISO 8123-1991 | 道路車輛 起動電機徑節小齒輪 | Road vehicles; diametral pitch starter motor pinions |
| ISO 8528-1-2005 | 往復式內燃交流發電機組.第1部分:用途、定額及性能 | Reciprocating internal combustion engine driven alternating current generating sets - Part 1: Application, ratings and performance |
| ISO 8528-10-1998 | 往復式內燃交流發電機組 第10部分:包絡面法測量空氣噪聲 | Reciprocating internal combustion engine driven alternating current generating sets - Part 10: Measurement of airborne noise by the enveloping surface method |
| ISO 8528-12-1997 | 往復式內燃交流發電機組 第12部分:應急發電設備 | Reciprocating internal combustion engine driven alternating current generating sets - Part 12: Emergency power supply to safety services |
| ISO 8528-2-2005 | 往復式內燃交流發電機組 第2部分:發動機 | Reciprocating internal combustion engine driven alternating current generating sets - Part 2: Engines |
| ISO 8528-3-2005 | 往復式內燃機驅動的交流發電機組.第3部分:發電機組用交流發電機 | Reciprocating internal combustion engine driven alternating current generating sets - Part 3: Alternating current generators for generating sets |
| ISO 8528-4-2005 | 往復式內燃交流發電機組.第4部分:控制裝置與開關裝置 | Reciprocating internal combustion engine driven alternating current generating sets - Part 4: Controlgear and switchgear |
| ISO 8528-5-2005 | 往復式內燃機驅動的交流發電機組.第5部分:發電機組 | Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets |
| ISO 8528-6-2005 | 往復式內燃交流發電機組.第6部分:試驗方法 | Reciprocating internal combustion engine driven alternating current generating sets - Part 6: Test methods |
| ISO 8528-7-1994 | 往復式內燃交流發電機組 第7部分:技術規格和設計說明 | Reciprocating internal combustion engine driven alternating current generating sets - Part 7: Technical declarations for specification and design |
| ISO 8528-8-1995 | 往復式內燃交流發電機組 第8部分:小功率發電機組技術要求和試驗 | Reciprocating internal combustion engine driven alternating current generating sets - Part 8: Requirements and tests for low-power generating sets |
| ISO 8528-9-1995 | 往復式內燃交流發電機組 第9部分:機械振動的測量和評定 | Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibration |
| ISO 8854-1988 | 道路車輛 帶調節器的交流發電機 試驗方法和一般要求 | Road vehicles; alternators with regulators; test methods and general requirements |
| ISO 9457-1-1991 | 道路車輛 米制起動電機小齒輪 第1部分:通常使用的小齒輪 | Road vehicles; metric starter motor pinions; part 1: currently used pinions |
| ISO 9457-2-1994 | 道路車輛.米制起動電機小齒輪.第2部分:具有20度壓力角的小齒輪 | Road vehicles - Metric starter motor pinions - Part 2: Pinions with 20° pressure angle |
| 編號 | 中文名稱 | 英文名稱 |