| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF C01-195/A1-2001 | 電工詞匯.第195章:電機的接地和保護 | (Electrotechnical Vocabulary - Chapter 195 : earthing and protection against electric shock.) |
| NF C01-411-1998 | 電工詞匯.第411章:旋轉電機 | (Electrotechnical vocabulary. Chapter 411 : rotating machines.) |
| NF C01-581-1982 | 電工技術詞匯.第581章:電子設備用電機元件 | (Electrotechnical vocabulary. Chapter 581 : electromechanical components for electronic equipment.) |
| NF C51-111-1999 | 旋轉電機.第1部分:額定功率和性能 | (Rotating electrical machines - Part 1 : rating and performance.) |
| NF C51-111/A11-2003 | 旋轉電機.第1部分:額定值和性能 | (Rotating electrical machines - Part 1 : rating and performance.) |
| NF C51-111/A2-2001 | 旋轉電機.第1部分:額定值及性能 | (Rotating electrical machines - Part1 : rating and performance.) |
| NF C51-112-1975 | 旋轉電機.旋轉電機試驗后的損耗和效率的測定方法 | (Rotating electrical machines methods for determining losses and efficiency of rotating electrical machinery from tests.) |
| NF C51-113-1997 | 旋轉電機.第3部分:渦輪型同步機械的特殊要求 | (Rotating electrical machines. Part 3 : specific requirements for turbine-type synchronous machines.) |
| NF C51-114-1996 | 旋轉電機.第4部分:同步電機參數的試驗測定方法 | (Rotating electrical machines. Part 4 : methods for determining synchronous machine quantities from tests.) |
| NF C51-115-2001 | 旋轉電機.第5部分:由旋轉電機總體設計提供的防護級別.分級 | (Rotating electrcal machines - Part 5 : degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification.) |
| NF C51-116-1995 | 旋轉電機.第6部分:冷卻法 | (Rotating electrical machines. Part 6 : methods of cooling (ic code).) |
| NF C51-117-1995 | 旋轉電機.第7部分:結構、安裝配置和接線盒位置的型式分類(IM 代碼) | (Rotating electrical machines. Part 7 : classification of types of construction, mounting arrangements and treminal box positon (IM code).) |
| NF C51-117/A1-2002 | 旋轉電機.第7部分:結構、裝配和接線盒位置的型號分類(IM 碼) | (Rotating electrical machines - Part 7 : classification of types of construction, mounting arrangements and terminal box position (IM code).) |
| NF C51-118-2003 | 旋轉電機.第8部分:旋轉電機的線端標記與旋轉方向 | (Rotating electrical machines - Part 8 : terminal markings and direction of rotation.) |
| NF C51-119-2000 | 旋轉電機.第9部分:噪聲極限值 | (Rotating electrical machines - Part 9 : noise limits.) |
| NF C51-124-2000 | 旋轉電機.第14部分:軸高56mm和更高的設備的機械振動.測量、評價和振動范圍 | (Rotating electrical machines - Part 14 : Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration.) |
| NF C51-200-1964 | 旋轉電機.額定功率為６００ＶＡ或６００Ｗ以下的電機.規則 | (ROTATING ELECTRICAL MACHINERY. ELECTRICAL MACHINES RATED UP TO 600 VOLTAMPERES OR 600 WATTS. REQUIREMENTS.) |
| NF C51-209-2000 | 高壓發電機的芯棒和線圈的絕緣性試驗 | (Test of insulation of bars and coils of high-voltage machines.) |
| NF C51-222-2000 | 旋轉電機.第22部分:往復式內燃機驅動的發電機組(RIC)用交流發電機 | (Rotating electrical machines - Part 22 : AC genertors for reciprocating internal combustion (RIC) engine driven generating sets.) |
| NF C51-312-2003 | 旋轉電機.第12部分:單速三相籠型感應電動機的起動性能 | (Rotating electrical machines - Part 12 : starting performance of single-speed three-phase cage induction motors.) |
| NF C51-316-1-1997 | 旋轉電機.第16部分:同步設備用激勵系統.第1章:定義 | (Rotating electrical machines. Part 16 : excitation systems for synchronous machines. Chapter 1 : definitions.) |
| NF C51-318-1-1995 | 旋轉電機.第18部分:絕緣體系的功能評定.第1節:通則(歐洲標準EN 60 034-18-1) | (Rotating electrical machines - Part 18 : functional evaluation of insulation systems - Section 1 : general guidelines.) |
| NF C51-318-1/A1-2000 | 旋轉電機.第18部分:絕緣系統的功能評定.第1節:一般導則 | (Rotating electrical machines - Part 18 : functional evaluation of insulation systems - Section 1 : general guidelines.) |
| NF C51-318-21-1995 | 旋轉電機.第18部分:絕緣體系的功能評定.第21節:繞組線的試驗程序.熱測定和分類 | (Rotating electrical machines. Part 18 : functional evaluation of insulation systems. Section 21 : test procedures for wire-wound windings. Thermal evaluation and classification.) |
| NF C51-318-21/A1+A2-2000 | 旋轉電機.第18部分:絕緣系統的功能評定.第21節:繞組線的試驗方法.熱評定和分類 | (Rotating electrical machines - Part 18 : functional evaluation of insulation systems - Section 21 : test procedures for wire-wound windings - Thermal evaluation and classification.) |
| NF C51-318-22-2001 | 旋轉電機.第18-22部分:絕緣系統的功能評價.金屬線繞組的試驗過程.絕緣元件替代物和變更物的分類 | (Rotating electrical machines - Part 18-22 : functional evaluation of insulation systems - Test procedures for wire-wound windings - Classification of changes and insulation component substitutions.) |
| NF C51-318-31-1995 | 旋轉電機.第18部分:絕緣體系的功能評定.第31節:模繞繞組線的試驗程序.機器的最在功率為50MVA電壓為15kV的絕 | (Rotating electrical machines. Part 18 : functional evaluation of insulation systems. Section 31 : test procedures for form-wound windings. Thermal evaluation and classification of insulation systems used in machines up to and including 50 mva and 15 kv.) |
| NF C51-318-31/A1-2000 | 旋轉電機.第18部分:絕緣體系的功能評定.第31節:模繞繞組線的試驗程序.機器最大功率為50MVA,電壓為15kV的絕 | (Rotating electrical machines - Part 18 : functional evaluation of insulation systems - Section 31 : test procedures for form-wound windings - Thermal evaluation and classification of insulation system) |
| NF C51-350-1997 | 旋轉電機.第15部分:帶模繞定子線圈的旋轉交流設備的脈沖電壓的耐壓等級 | (Rotating electrical machines. Part 15 : impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils.) |
| NF C51-720-1988 | 旋轉電機.步進電機 | (ROTATING ELECTRICAL MACHINES. STEPPING MOTORS.) |
| NF C51-902-1968 | 旋轉電機.徑向式刷握用電刷 | (ROTATING ELECTRICAL MACHINERY. BRUSHES FOR RADIAL BRUSH HOLDERS.) |
| NF C51-903-1968 | 旋轉電機.電機用配件.徑向刷桿 | (ROTATING ELECTRICAL MACHINERY. RADIAL BRUSH HOLDERS.) |
| NF C51-953-1971 | 旋轉電機.電機用配件.片式集電環用的云母基絕緣錐體.尺寸的標準化 | (ROTATING ELECTRICAL MACHINERY. COMMUTATOR V-RING INSULATINES MADE FROM MICA PRODUCTS. STANDARD DIMENSIONS.) |
| NF C61-480/A1-2001 | 家用和類似用途的電機接觸器 | (Electromechanical contactors for household and similar purposes.) |
| NF C63-068-2003 | 低壓開關設備和控制設備.第8部分:旋轉電機用嵌入式熱保護控制裝置 | (Low-voltage switchgear and controlgear - Part 8 : control units for built-in thermal protection (PTC) for rotating electrical machines.) |
| NF C63-146/A2-2000 | 低壓開關設備和控制設備.第5-1部分:控制電路裝置和開關元件.電機控制電路設備 | (Low-voltage switchgear and controlgear - Part 5-1 : control circuit devices and switching elements - Electromechanical control circuit devices.) |
| NF C83-410-2002 | 總規范:電機開關 | (Generic Specification : electromechanical switches.) |
| NF C93-400-11-1-1999 | 電子設備用電機元件.基本試驗過程和測量方法.第11部分:氣候試驗.第1節:試驗11A.氣候序列 | (Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 11 : climatic tests. Section 1 : test 11a. Climatic sequence.) |
| NF C93-400-11-8-1999 | 電子設備的電機元件.基本試驗過程和測量方法.第11部分:氣候試驗.第8節:試驗11H:沙和塵土 | (Eletromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 11 : climatic tests. section 8 : test 11h : sand and dust.) |
| NF C93-400-14-7-1998 | 電子設備的電機元件.基本試驗過程和測量方法.第14部分:密封試驗.第7節:試驗14G.撞擊水 | (Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 14 : sealing tests. Section 7 : test 14g : impacting water.) |
| NF C93-400-19-3-1998 | 電子設備電機元件.基本試驗過程和測量方法.第19部分:化學抗性試驗.第3節:試驗19c:液流阻力 | (Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 19 : chemical resistance tests. Section 3 : test 19c : fluid resistance.) |
| NF C93-400-20-2-2001 | 電子設備的電機元件.基本試驗過程和測量方法.第20-2部分:試驗:20b.燃燒性試驗.阻燃性 | (Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2 : test 20b - Flammability tests - Fireproofness.) |
| NF C93-400-23-3-2001 | 電子設備用電機元件.基本試驗過程和測量方法.第23-3部分:試驗23c.連接件和附屬件的屏蔽效應 | (Electromechanical components for elctronic equipment - Basic testing procedures and measuring methods - Part 23-3 : test 23c : shielding effectiveness of connectors and accessories.) |
| NF C93-470-8-1997 | 電子設備的電機元件.基本試驗過程和測量方法.第15部分:接點和終端的機械試驗.第8節:試驗15H:對工具應用的接 | () |
| NF C93-471-7-1997 | 電子設備的電機元件.基本試驗過程和測量方法.第11部分:氣候試驗.第7節:試驗11G:流動混合氣體腐蝕試驗 | (ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 11 : CLIMATIC TESTS. SECTION 7 : TEST 11G : FLOWING MIXED GAS CORROSION TEST. (EUROPEAN STANDARD EN 60 512-11-7).) |
| NF C93-472-6-1997 | 電子設備的電機元件.基本試驗過程和測量方法.第12部分:焊接試驗.第6節:試驗12F:機械焊接過程中對液體和清潔 | (ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 12 : SOLDERING TESTS. SECTION 6 : TEST 12F : SEALING AGAINST FLUX AND CLEANING SOLVENTS IN MACHINE SOLDERING. (EUROPEAN STANDARD EN 60 512-12-6).) |
| NF C93-473-4-1997 | 電子設備的電機元件.基本試驗過程和測量方法.第10部分:撞擊試驗.(活動元件).靜態負載試驗(固定元件).耐力試 | () |
| NF E37-301-1994 | 往復式內燃機驅動的交流發電機組.第1部分:使用、額定功率和性能 | (Reciprocating internal combustion engine driven alternating current generating sets. Part 1 : application, ratings and performance.) |
| NF E37-302-1994 | 循環往復式內燃發動機驅動交流發電機組.第2部分:發動機 | (Reciprocating internal combustion engine driven alternating current generating sets. Part 2 : engines.) |
| NF E37-303-1994 | 循環往復式內燃發動機交流電發生.第3部分:發電機組交流電發生器材 | (Reciprocating internal combustion engine driven alternating current generating. Part 3 : alternating current generators for generating sets.) |
| NF E37-304-1994 | 往復式內燃機驅動的交流發電機組.第4部分:控制裝置機開關裝置 | (Reciprocating internal combustion engine driven alternating current generating sets. Part 4 : controlgear and switchgear.) |
| NF E37-305-1994 | 循環往復式內燃發動機交流電發生.第5部分:發電機組 | (Reciprocating internal combustion engine driven alternating current generating setts. Part 5 : generating sets.) |
| NF E37-306-1994 | 往復式內燃機驅動的交流發電機組.第6部分:試驗方法 | (Reciprocating internal combustion engine driven alternating current generating sets. Part 6 : test methods.) |
| NF E37-310-1999 | 往復式內燃機驅動的交流發電機組.第10部分:包絡面法測量空氣噪聲 | (RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN CURRENT GENERATING SETS. PART 10 : MEASUREMENT OF AIRBONE NOISE BY THE ENVELOPING SURFACE METHOD.) |
| NF E50-001-1956 | 風力充電機組.小功率風力發電機 | (WIND CHARGERS. LOW-RATED AEROGENERATORS.) |
| NF E60-134-1-2000 | 機械工具.沖模放電機器的試驗條件.術語和精度試驗.第1部分:單柱機 | (Machines tools - Test conditions for die sinking electro-discharge machines (EDM) - Terminology and testing of accuracy - Part 1 : single column machines (cross slide table type and fixed table type).) |
| NF E60-134-2-2000 | 機械工具.沖模放電機器的試驗條件.術語和精度試驗.第2部分:雙柱機 | (Machines tools - Test conditions for die sinking electro-discharge machines (EDM) -Terminology and testing of the accuracy - Part 2 : two column machines (slide-head type and cross-slide table type).) |
| NF E60-450-2001 | 機床.安全.放電機床 | (Machine tools - Safety - Electro Discharge Machines.) |
| NF E90-079-2-2002 | 機械振動.通過對旋轉軸的測量評定機械振動.第2部分:標稱運行速度為1500r/min,1800r/min,3000r/min和3600r/m | (Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2 : land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/) |
| NF F48-110-1995 | 鐵路固定設備.信號設備通信設備和計算機設備用標準式電源裝置.有柴油發動機的備用發電機設備 | (RAILWAY FIXED EQUIPMENT. MODULAR POWER SUPPLY UNITS FOR SIGNALLING EQUIPMENT, TELECOMMUNICATIONS EQUIPMENT AND COMPUTER EQUIPMENT. EQUIPMENTS FOR STAND-BY GENERATOR WITH DIESEL MOTOR.) |
| NF F48-210-1997 | 鐵路固定設備.信號設備、通信設備和計算機設備用調制電源裝置.帶柴油發動機的備用發電機系統 | (RAILWAY FIXED EQUIPMENT. MODULAR POWER SUPPLY UNITS FOR SIGNALLING EQUIPMENT, TELECOMUNICATIONS EQUIPMENT AND COMPUTER EQUIPMENT. SYSTEM OF STAND-BY GENERATOR WITH DIESEL MOTOR.) |
| NF F62-001-1-1991 | 鐵路車輛.控制和輔助線路用最大電流熱磁電機微型電路斷電器.一般特性和試驗 | (RAILWAY ROLLING STOCK. MAGNETO-THERMIC MICROCIRCUIT-BREAKERS FOR MAXIMUM CURRENT FOR CONTROLS AND AUXILIARIES CIRCUITS. GENERALITIES AND TESTS.) |
| NF F62-001-2-1991 | 鐵路車輛.控制和輔助線路用最大電流熱磁電機微型電路斷電器.尺寸 | (RAILWAY ROLLING STOCK. MAGNETO-THERMIC MICROCIRCUIT-BREAKERS FOR MAXIMUM CURRENT FOR CONTROLS AND AUXILIARIES CIRCUITS. DIMENSION.) |
| NF F62-001-3-1991 | 鐵路車輛.控制和輔助線路用最大電流熱磁電機微型電路斷電器.特殊簧片總成 | (RAILWAY ROLLING STOCK. MAGNETO-THERMIC MICROCIRCUIT-BREAKERS FOR MAXIMUM CURRENT FOR CONTROLS AND AUXILIAIRIES CIRCUITS. COLLECTION OF PARTICULFAR LEAVES.) |
| NF F65-101-1991 | 鐵路車輛.輔助旋轉電機.技術布局 | (Railway rolling stock. Auxiliary rotating machines. Technologic dispositions.) |
| NF F65-200-1993 | 鐵路車輛.牽引電機.設計規范 | (RAILWAY ROLLING STOCK. TRACTION MOTORS. DESIGN SPECIFICATIONS.) |
| NF F65-349-1-2000 | 電氣牽引.鐵路和道路車輛用旋轉電機.第1部分:非電子交換回饋交變電流馬達機 | (Electrical traction - Rotating electrical machines for rail and road vehicules - Part 1 : machines other than electronic convertor-fed alternating current motors.) |
| NF F65-349-1/A1-2003 | 電力牽引.鐵路與道路車輛用旋轉電機.第1部分:除電子變流器供電的交流電動機之外的旋轉電機 | (Electric traction - Rotating electrical machines for rail and road vehicles - Part 1 : machines other than electronic convertor-fed alternating current motors.) |
| NF L51-151-1979 | 直流發電機電壓調器.底座安裝和和外形尺寸 | (VOLTAGE REGULATORS FOR DIRECT CURRENT GENERATORS. OVERALL DIMENSIONS AND METHOD OF FIXING OF BASE.) |
| NF L51-160-1966 | 飛行器電氣設備.直流發電機饋線保護箱 | (ELECTRICAL EQUIPMENT FOR AIRCRAFT. FEEDER PROTECTION HOUSING FOR DIRECT CURRENT GENERATOR.) |
| NF L86-310-1958 | 簡單永磁電機.凸緣固定和驅動 | (MAGNETOS. FLANGE MOUNTING AND DRIVE.) |
| NF R11-503-1975 | 熱電機試驗規則.總功率測定 | (THERMAL ENGINE TEST CODE. GROSS POWER MEASUREMENT.) |
| NF R11-503M1-1978 | 熱電機的試驗規則.總功率的測量 | (THERMAL ENGINES TEST METHOD.GROSS POWER MEASUREMENT.) |
| NF R13-107-1970 | 發電機電磁調節器.螺釘固定 | (ELECTROMAGNETIC REGULATORS FOR GENERATORS. SCREW MOUNTING.) |
| NF R13-201-1966 | 交流發電機及其調節器用接線柱 | (TERMINALS FOR ALTERNATORS AND THEIR REGULATORS.) |
| NF R13-202-1989 | 道路車輛.組合式帶整流器的交流發電機.試驗方法和試驗的一般條件 | (Road vehicles. Alternators with regulators. Test methods and general requirements.) |
| NF R13-203-1989 | 特種車輛和派生車輛.組合式帶整流器的交流發電機.尺寸特性 | (PASSENGER CARS AND SIMILAR VEHICLES. ALTERNATORS WITH INCORPORATED REGULATORS. DIMENSIONAL CHARACTERISTICS.) |
| NF R23-103-1932 | 摩托車磁發電機和直流發電機.錐軸端 | (MAGNETOS AND DYNAMOS FOR MOTORCYCLES.) |
| NF R33-101-1974 | 自行車照明發電機.互換特性 | (LIGHTING GENERATOR FOR CYCLES. INTERCHANGEABILITY CHARACTERISTICS.) |
| NF R33-102-1974 | 自行車照明發電機.在車架上的固定 | (LIGHTING GENERATOR FOR CYCLES. CLAMPING ON THE FRAME.) |
| NF R33-103-1974 | 自行車照明發電機.技術規范和試驗 | (LIGHTING GENERATOR FOR CYCLES. TECHNICAL REQUIREMENTS AND TESTS.) |
| NF X50-001-2-6-2000 | 動力站設備的征購指南.第2部分:電氣設備.第6節:發電機 | (Guide for procurement of power station equipment - Part 2 : electrical equipment - Section 6 : generators.) |
| 編號 | 中文名稱 | 英文名稱 |