| 編號 | 中文名稱 | 英文名稱 |
|---|
| ANSI B11.2-1995
| 機床.液壓機.制造、維護和使用的安全性要求
| Machine tools - Hydraulic power presses - Safety requirements for construction, care, and use
|
| ANSI B93.10M-1969
| 方頭液壓傳動缸的靜態壓力旋轉法
| Static Pressure Rating Methods of Square Head Fluid Power Cylinders
|
| ANSI B93.112M-1988
| 液壓氣動閥內部漏泄特性的測定方法
| Hydraulic Fluid Power - Valves - Method for Determining the Internal Leakage Characteristics
|
| ANSI B93.46-1978
| 過濾器元件、可清潔表面型液壓傳動孔大小的測定方法
| Filter Element, Method of Determining the Pore Size of a Cleanable Surface Type Hydraulic Fluid Power
|
| ANSI B93.54M-1981
| 液壓傳動.組裝系統.實現輾軋潔凈度的方法
| Hydraulic Fluid Power - Assembled Systems - Method for Achieving Roll-off Cleanliness
|
| ANSI B93.62M-1982
| 液壓傳動.線性執行器中往復式動力密封設備.泄露的試驗、測量和報告方法
| Hydraulic Fluid Power - Reciprocating Dynamic Sealing Devices in Linear Actuators - Method of Testing, Measuring, and Reporting Leakage
|
| ANSI B93.76-1988
| 液壓氣動缸.往復運動用活塞和活塞桿密封腔的尺寸和公差
| Hydraulic Fluid Power - Cylinders - Housings for Piston and Rod Seals in Reciprocating Applications - Dimensions and Tolerances
|
| ANSI B93.77M-1987
| 液壓氣動缸傳動安裝閥安裝表面的標準尺寸
| Hydraulic Fluid Power - Cylinder Actuator Mounted Valves - Standard Dimensions for Mounting Surfaces
|
| ANSI B93.95M-1987
| 液壓氣動用容積式泵、馬達、整體傳輸.穩態性能的測量
| Hydraulic Fluid Power - Positive Displacement Pumps, Motors, and Integral Transmissions - Determination of Steady-State Performance
|
| ANSI B93.98M-1987
| 液壓用旋轉軸凸緣密封圈的公稱尺寸和公差
| Fluid Power - Rotary Shaft Lip Type Seals - Nominal Dimensions and Tolerances
|
| ANSI S2.48-1993
| 振動發生器的伺服液壓試驗設備.特性的描述方法
| Servo-Hydraulic Test Equipment for Generating Vibration - Methods of Describing Characteristics
|
| ANSI/(NFPA) T2.12.1-2002
| 液壓傳動.系統和產品.測量平均穩態壓力的方法
| Hydraulic fluid power - Systems and products - Method of measuring average steady-state pressure (to be used in conjunction with ANSI/(NFPA)T2.12.10)
|
| ANSI/(NFPA) T2.12.10-2002
| 推薦實施規程.液壓傳動.系統和產品.檢驗一般測量原則和公差
| Recommended practice - Hydraulic fluid power - Systems and products - Testing general measurement principles and tolerances (to be used in conjunction with ANSI/(NFPA)T2.12.1)
|
| ANSI/(NFPA) T3.19.25 R1-2004
| 信息報告.液壓系統.密封裝置.彈性密封件和隔離裝置的存儲、搬運和安裝
| Information Report - Fluid Power Systems - Sealing Devices - Storage, Handling, and Installation of Elastomeric Seals and Exclusion Devices
|
| ANSI/ASAE S201.4-1982
| 農用拖拉機拖掛型農具、液壓遙控汽缸的應用
| Agricultural Tractors and Trailing-Type Agricultural Implements, Application of Hydraulic Remote Control Cylinders to
|
| ANSI/ASAE S366.2-2004
| 農業拖拉機和機械.一般用途快速液壓接頭
| Agricultural tractors and machinery - General purpose quick-action hydraulic couplers
|
| ANSI/ASME A112.19.13-2001
| 電動液壓抽水馬桶
| Electrohydraulic Water Closets
|
| ANSI/ASTM D1599-1999
| 塑料管材、管道和管件短時液壓故障壓力試驗方法
| Test Method for Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
|
| ANSI/ASTM D2070-1991
| 液壓油的熱穩定性的試驗方法(05.01)
| Method for Thermal Stability of Hydraulic Oils (05.01)
|
| ANSI/ASTM D2619-1995
| 液壓油的水解穩定性的試驗方法(酒瓶試驗法)(05.02)
| Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Test Method), Test Method for (05.02)
|
| ANSI/ASTM D4174-1989
| 石油液壓系統的清潔、沖洗和凈化慣例
| Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems, Practice for the (05.02)
|
| ANSI/ASTM D4636-1998
| 液壓油、航空透平引擎潤滑劑和其他高精煉油的腐蝕與氧化穩定性測試方法
| Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
|
| ANSI/ASTM D4898-1990
| 重力測量分析液壓油不溶性污染試驗方法
| Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
|
| ANSI/ASTM D4998-1995
| 評定拖拉機液壓油耐磨特性的試驗方法
| Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids (05.03)
|
| ANSI/ASTM D5306-1997
| 潤滑油和液壓液的線性傳播速率的測試新方法
| New Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids (05.03)
|
| ANSI/ASTM D5534-1999
| 液壓液汽相生銹預防特性的測試方法
| Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
|
| ANSI/ASTM D5846-2002
| 液壓流體和渦輪機油的一般氧化試驗方法
| Test Method for Universal Oxidation Test for Hydraulic Fluids and Turbine Oils
|
| ANSI/ASTM D6006a-1997
| 液壓液生物降解性的評定指南
| Guide for Assessing Biodegradabillty of Hydraulic Fluids
|
| ANSI/ASTM D6046-2002
| 環境沖擊用液壓液的分類
| Classification of Hydraulic Fluids for Environmental Impact
|
| ANSI/ASTM D6158-2005
| 礦物液壓油規范
| Specification for Mineral Hydraulic Oils
|
| ANSI/ASTM D6351-1999
| 液壓油低溫流動性和外觀測定方法
| Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
|
| ANSI/ASTM D6546-2000
| 工業用液壓油密封圈兼容性的測定試驗方法和提議限制
| Test Methods and Suggested Limits for Determining the Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications
|
| ANSI/ASTM D6595-2005
| 用轉盤電極原子發射光譜法測定已用潤滑油或已用液壓液中磨損金屬和雜質的試驗方法
| Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
|
| ANSI/ASTM D6813a-2002
| 活塞泵的液壓流體性能的評定指南
| Guide for the Performance Evaluation of Hydraulic Fluids for Piston Pumps
|
| ANSI/ASTM D6973-2005
| 高壓定容葉輪泵中石油液壓液耐磨特性指示的試驗方法
| Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
|
| ANSI/ASTM D7043a-2004
| 固定容量離心泵中石油和非石油液壓液磨損特性指示的試驗方法
| Test Method for Indicating Wear Characteristics of Petroleum and Non-petroleum Hydraulic Fluids in a Constant Volume Vane Pump
|
| ANSI/ASTM D7044a-2004
| 可生物降解的耐火液壓液規范
| Specification for Biodegradable Fire Resistant Hydraulic Fluids
|
| ANSI/ASTM F1794-1997
| 氣體(除氧氣)和液壓系統手動球形閥門規范
| Specification for Hand-Operated Globe-Style Valves for Gas (Except Oxygen Gas) and Hydraulic Systems
|
| ANSI/ASTM F2164-2002
| 采用液壓法進行聚乙烯壓力管道系統場漏試驗的慣例
| Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
|
| ANSI/IEEE 1249-1996
| 液壓電力工廠以計算機為基礎的自動化控制指南
| Guide for Computer-Based Control for Hydroelectric Power Plant Automation
|
| ANSI/ISO 5675-1992
| 農業拖拉機和機械.一般用途快速液壓接頭
| Agricultural tractors and machinery - General purpose quick-action hydraulic couplers
|
| ANSI/SAE J/ISO10567-1998
| 土方機械.液壓挖掘機.提升性能
| Earthmoving Machinery - Hydraulic Excavators - Lift Capacity
|
| ANSI/SAE J/ISO7135-1998
| 土方機械.液壓挖掘機.術語和商用規范
| Earthmoving Machinery - Hydraulic Excavators - Terminology and Commercial Specifications
|
| ANSI/SAE J1036-1993
| 農用拖拉機圓柱形液壓系統管接頭的尺寸標準
| Dimensional Standard for Cylindrical Hydraulic Couplers for Agricultural Tractors
|
| ANSI/SAE J1118-1993
| 摩托車制動系統試驗程序用液壓閥
| Hydraulic Valves for Motor Vehicle Brake Systems Test Procedure
|
| ANSI/SAE J1371-1993
| 液壓挖掘機擺動的最低性能和評定程序
| Hydraulic Excavator Swing Minimum Performance and Rating Procedure
|
| ANSI/SAE J1401-1993
| 道路車輛.使用非石油基液壓油的液壓制動軟管組件
| Road Vehicle - Hydraulic Brake Hose Assemblies for Use with Non-Petroleum Base Hydraulic Fluids
|
| ANSI/SAE J1406-1993
| 汽車輛液壓制動軟管的應用
| Application of Hydraulic Brake Hose to Motor Vehicles
|
| ANSI/SAE J1568-1993
| 液壓盤式制動器制動缸塑料活塞用材料
| Materials for Plastic Pistons for Hydraulic Disc Brake Cylinders
|
| ANSI/SAE J1644-1998
| 液力和一般用途金屬管聯結件.螺紋式液壓傳動聯結件的試驗方法
| Metallic Tube Connections for Fluid Power and General Use - Test Methods for Threaded Hydraulic Fluid Power Connectors
|
| ANSI/SAE J1790-1998
| 自行式清掃器和擦洗器方向控制要求.單路液壓輔助服務系統
| Self-Propelled Sweepers and Scrubbers Steering Requirements - Single-Circuit Hydraulic Servo-Assisted Systems
|
| ANSI/SAE J2244/3-1998
| 液壓傳動和通用連接.帶ISO 261螺紋和O形密封圈的孔及螺柱端.第3部分:輕型(L系列)螺柱端.尺寸、設計、試驗方
| Connections for Fluid Power and General Use-Ports and Stud Ends with ISO 261 Threads and O-Rings Sealing - Part 3: Light-Duty (L Series) Stud Ends - Dimensions, Design, Test Methods, and Requirements
|
| ANSI/SAE J2333-1998
| 船舶系統和設備液壓系統.油濾選用參數
| Ship Systems and Equipment Hydraulic Systems - Filter Selection Parameters
|
| ANSI/SAE J283-1993
| 配備有三點式懸掛裝置的農用拖拉機液壓提升能力測量程序
| Measuring Hydraulic Lift Capacity on Agricultural Tractors Equipped with Three-Point Hitch, Test Procedure for
|
| ANSI/SAE J514-1998
| 液壓管件
| Hydraulic Tube Fittings
|
| ANSI/SAE J516-1997
| 液壓軟管配件
| Hydraulic Hose Fittings
|
| ANSI/SAE J517-1998
| 液壓軟管
| Hydraulic Hose
|
| ANSI/SAE J518-1993
| 四螺栓拼合法蘭型液壓法蘭管、管道及軟管接頭
| Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt Split Flange Type
|
| ANSI/SAE J641-1993
| 液壓傳動術語
| Hydrodynamic Drives Terminology
|
| ANSI/SAE J648-1993
| 自動變速器的液壓控制系統術語
| Automatic Transmission Hydraulic Control Systems Terminology
|
| ANSI/UL 1739-2004
| 消防用液壓控制閥
| Pilot-Operated Pressure-Control Valves for Fire-Protection Service
|
| ASME A112.19.13-2001
| 電動液壓抽水馬桶
| (Electrohydraulic water closets)
|
| ASME A17 Checklist 3-1991
| 液壓升降機試驗檢驗檢查表(除保安器和配重外的直接柱塞)
| (Checklist for inspection and test of hydraulic elevators (for direct plunger without safeties or counterweights))
|
| ASME A17.2.2-1997
| 液壓升降機的檢驗員手冊(包括液壓升降機的檢驗程序)
| (Inspectors' manual for hydraulic elevators (includes inspection procedures for hydraulic elevators))
|
| ASME A17.2.2a Addenda-1998
| 液壓升降機的檢驗員手冊.附錄
| (Inspectors' manual for hydraulic elevators; Addenda)
|
| ASME PTC 29-1965
| 液壓汽輪發電機組的速度調節系統
| (Speed-governing systems for hydraulic turbine-generator units)
|
| ASME Y32.10-1967
| 液壓示意圖的圖形符號
| (Graphic symbols for fluid power diagrams)
|
| ASTM A 822/A 822M-2004
| 液壓系統設備用無縫冷拔碳素鋼管的標準規范
| Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
|
| ASTM C 109/C 109M-2005
| 液壓水泥灰漿的抗壓強度標準試驗方法(使用2英寸或50毫米管試樣)
| Standard Test Method for Compressive Strength of Hydraulic Cement Mortars(Using 2-in. or [50-mm] Cube Specimens)
|
| ASTM C 1196-2004
| 用液壓千斤頂現場測量實心砌塊抗壓應力的標準試驗方法
| Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements
|
| ASTM C 1197-2004
| 用液壓千斤頂法現場測量磚石建筑可變形性的標準試驗方法
| Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
|
| ASTM C 1306a-2005
| 液用防水薄膜抗靜液壓力的標準試驗方法
| Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
|
| ASTM D 1599-1999
| 塑料管道和配件耐短時液壓力的標準試驗方法
| Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
|
| ASTM D 2070-1991
| 液壓油熱穩定性的標準試驗方法
| Standard Test Method for Thermal Stability of Hydraulic Oils
|
| ASTM D 2619-1995
| 液壓液水解穩定性的標準試驗方法(酒瓶法)
| Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)
|
| ASTM D 3786-2001
| 織物液壓破裂強度的標準測試方法.薄膜破裂強度試驗器法
| Standard Test Method for Hydraulic Bursting Strength of Textile Fabrics-Diaphragm Bursting Strength Tester Method
|
| ASTM D 4174-1989
| 石油液壓系統的清理、沖洗及凈化的標準實施規程
| Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems
|
| ASTM D 4636-1999
| 液壓油、飛機渦輪發動機潤滑油和其他高精煉油的腐蝕性和氧化穩定性的試驗方法
| Standard Test Method for Corrosiveness and Oxidation qualility of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
|
| ASTM D 4716-2004
| 使用恒定壓頭測定土工合成織物(在平面中)單位寬度流速和液壓透射率的試驗方法
| Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
|
| ASTM D 4998-1995
| 評定牽引車液壓液磨損特性的標準試驗方法
| Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids
|
| ASTM D 5306-1992
| 潤滑油和液壓液線性火焰?zhèn)鞑ニ俣鹊臏y試方法
| Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids
|
| ASTM D 5534-1994
| 液壓液體汽相防銹性能的標準試驗方法
| Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
|
| ASTM D 5621-2001
| 液壓流體的聲波剪切穩定性標準試驗方法
| Standard Test Method for Sonic Shear Stability of Hydraulic Fluid
|
| ASTM D 5846-2002
| 使用通用氧化試驗設備進行液壓液和渦輪機油的通用氧化試驗的標準試驗方法
| Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus
|
| ASTM D 5856-1995
| 使用剛性壁壓縮模式磁導率計測量多孔性材料液壓導電率的標準試驗方法
| Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
|
| ASTM D 5912-1996
| 通過超阻尼井回應頂部的瞬息變化測定自由含水層液壓導電率的分析程序的標準試驗方法
| Standard Test Method for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug)
|
| ASTM D 6006a-1997
| 評定液壓流體生物降解性的標準指南
| Standard Guide for Assessing Biodegradability of Hydraulic Fluids
|
| ASTM D 6046-2002
| 環境沖擊液壓液的標準分類
| Standard Classification of Hydraulic Fluids for Environmental Impact
|
| ASTM D 6080-1997
| 液壓流體粘滯特性定義的標準操作
| Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids
|
| ASTM D 6158-2005
| 礦物液壓油的標準規范
| Standard Specification for Mineral Hydraulic Oils
|
| ASTM D 6351-1999
| 測定液壓液低溫流動性和表面特性的標準試驗方法
| Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
|
| ASTM D 6391-2006
| 使用從鉆孔滲流的兩個階段對多孔材料液壓傳導性限值進行現場測量的標準試驗方法
| Standard Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous Materials Using Two Stages of Infiltration from a Borehole
|
| ASTM D 6519-2005
| 用液壓操作的固定活塞采樣器進行土壤取樣的標準實施規程
| Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
|
| ASTM D 6527-2000
| 用穩態離心法測定多孔介質中不飽和和飽和液壓傳導性的標準試驗方法
| Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation
|
| ASTM D 6546-2000
| 工業液壓液用彈性密封件能力測定的標準試驗方法和建議極限值
| Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications
|
| ASTM D 6574-2000
| 徑向流動法測定土工合成物(平面)液壓透射率的試驗方法
| Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow
|
| ASTM D 6595-2000
| 用旋轉盤電極原子發射光譜法測定已用潤滑油或已用液壓流體中雜質的標準試驗方法
| Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
|
| ASTM D 6766-2006
| 評價被潛在不可溶液體滲透的土工合成粘土襯液壓特性的標準試驗方法
| Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Liquids
|
| ASTM D 6813a-2002
| 活塞泵的液壓液性能評定的標準指南
| Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps
|
| ASTM D 6973-2005
| 高壓定容葉輪泵中石油液壓液磨損特性指示的標準試驗方法
| Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
|
| ASTM D 7043a-2004
| 定容葉輪泵中石油和非石油液壓液的磨損特性指示的標準試驗方法
| Standard Test Method for Indicating Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
|
| ASTM D 7044a-2004
| 可生物降解的阻燃型液壓液的標準規范
| Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids
|
| ASTM E 641-2001
| 農用液壓噴嘴的試驗的標準方法
| Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture
|
| ASTM E 979-1991
| 評估用逆乳液與其它含水液壓液作防腐劑的抗微生物制劑的試驗方法
| Test Method for Evaluation of Antimicrobial Agents as Preservatives for Invert Emulsion and Other Water Containing Hydraulic Fluids
|
| ASTM F 1794-1997
| 手動、球型閥氣體(除氧氣)和液壓系統標準規范
| Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems
|
| ASTM F 2164-2002
| 使用靜液壓的聚乙烯壓力管道系統的現場泄漏試驗的標準實施規范
| Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
|
| ASTM F 862-1993
| 航空航天液壓流體的氯離子濃度及pH值的試驗方法
| Test Method for pH and Chloride-Ion Concentration of Aerospace Hydraulic Fluids
|
| UL 1469-1995
| 回流專用止回閥的閥身強度和液壓損失率檢驗
| (Strength of body and hydraulic pressure loss testing of backflow special check valves )
|
| UL 1739-1994
| 消防設備用液壓控制的壓力控制閥
| (Pilot-operated pressure-control valves for fire-protection service )
|
| 編號 | 中文名稱 | 英文名稱 |
|---|