| 編號 | 中文名稱 | 英文名稱 |
|---|
| DIN 11751-1989
| 農用拖拉機和機械.拖掛車用液壓筒(200巴).連接尺寸
| Agricultural tractors and machinery; hydraulic cylinders for trailers; connecting dimensions
|
| DIN 14751-4-2002
| 消防隊用液壓操作救援器械.第4部分: 帶綜合泵和/或電源的雙重作用的液壓式救援器械
| Hydraulically operated rescue apparatus for fire brigade use - Part 4: Double acting hydraulic rescue tools with integrated pump and/or power source
|
| DIN 14751-5-2004
| 消防隊用液壓救生工具.第5部分:單作用力液壓救生工具
| Hydraulically operated rescue tools for fire brigade use - Part 5: Single acting hydraulic rescue tools
|
| DIN 14800-6-2004
| 消防車和救援服務車用消防技術裝備.第6部分:帶單作用力液壓臂的液壓起重設備
| Fire-fighting equipment for fire-fighting and rescue service vehicles - Part 6: Hydraulic lifting equipment with single acting hydraulic rams
|
| DIN 15430-1989
| 動力傳動設備.電動液壓的升降設備.尺寸和技術要求
| Power transmission engineering; electrohydraulic lifting appliances; dimensions and technical requirements
|
| DIN 18157-1-1979
| 采用稀灰漿墊料工藝制作陶瓷襯里.第1部分:液壓灰漿
| Execution of ceramic linings by thin mortar bed technique; hydraulic mortar
|
| DIN 18506-2002
| 液壓道路粘結劑.組分、規范和符合性準則
| Hydraulic road binders - Composition, specifications and conformity criteria
|
| DIN 19682-8-1972
| 農業工程用土壤探查方法.第8部分:野外試驗.采用螺旋鉆孔法對液壓滲透性的測定
| Methods of soil investigations for agricultural engineering; field tests, determination of the hydraulic conductivity by auger hole method
|
| DIN 19683-9-1998
| 農業工程中土壤調查研究方法.物理實驗室試驗.第9部分.圓柱形鉆芯－刀具的飽和液壓水導電性的測定
| Methods of soil investigations for agricultural engineering - Physical laboratory tests - Part 9: Determination of the saturated hydraulic water conductivity in the cylindrical core-cutter
|
| DIN 19704-1-1998
| 鋼制液壓結構件.第1部分:設計和計算準則
| Hydraulic steel structures - Part 1: Criteria for design and calculation
|
| DIN 19704-2-1998
| 鋼制液壓結構件.第2部分:設計和制造
| Hydraulic steel structures - Part 2: Design and manufacturing
|
| DIN 19704-3-1998
| 鋼制液壓結構件.第3部分:電氣設備
| Hydraulic steel structures - Part 3: Electrical equipment
|
| DIN 20021-1997
| 液壓系統.帶襯里的軟管.DIN EN 853至DIN EN 857的補充件
| Fluid-systems - Hoses with layer - Completation for DIN EN 853 to DIN EN 857
|
| DIN 20043-2003
| 液壓傳動循環管路用U形鎖扣連接件
| Staple-lock couplings for hydraulic power-transmission circuits
|
| DIN 20044-2003
| 液壓動力傳輸管路用S型鉤環鎖定聯接器.尺寸、要求和試驗
| Staple-lock couplings type S for hydraulic power-transmission circuits - Dimensions, requirements, testing
|
| DIN 24080-1979
| 運土機械.液壓式纜索傳動挖土機.挖土機:術語
| Earth-moving Machinery; Hydraulic Excavators Cable-operated, Excavators; Terms
|
| DIN 24087-1979
| 土方機械.液壓挖土機的可靠性測定.安全要求
| Earth Moving Machinery; Determination of Stability of Hydraulic Excavators Safety Requirements
|
| DIN 24311-1992
| 液壓流體動力.比例控制閥和伺服閥.定義、符號和單位
| Hydraulic fluid power; proportional and servo valves; definitions, symbols, units
|
| DIN 24312-1985
| 液壓系統和元件.壓力、量值、術語
| Fluid power systems and components; pressure; quantities, terms
|
| DIN 24320-1986
| 耐燃液壓油.HFAE級.性能和要求
| Fire resistant fluids; group HFAE, characteristics, requirements
|
| DIN 24331-1972
| 液壓流體力學.液壓泵和液壓馬達、幾何排量-容量、流量
| Oilhydraulic; hydraulic pumps and hydraulic engines, geometrical displacement-volume, rates
|
| DIN 24333-1979
| 液壓.250巴液壓缸.安裝尺寸
| Fluidpower; hydraulic cylinder 250 bar, mounting dimensions
|
| DIN 24336-1980
| 流體動力.100巴液壓缸.安裝尺寸
| Fluidpower; hydraulic cylinder 100 bar, mounting dimensions
|
| DIN 24337-2001
| 液壓動力.旋轉頭.尺寸、要求
| Fluid power - Rod end plain eyes - Dimensions, requirements
|
| DIN 24338-2001
| 液壓動力.寬鉸節軸承鉸節頭.尺寸、要求
| Fluid power - Rod end spherical eyes - Dimensions, requirements
|
| DIN 24339-1993
| 流體動力.鋼制液壓容器.尺寸、要求和試驗方法.公稱容量63至1250
| Fluid power; hydraulic reservoirs made of steel; dimensions, requirements, test methods; nominal capacity 63 to 1250
|
| DIN 24340-2-1982
| 液壓閥.換向閥用安裝面和連接板
| Hydraulic valves; mounting surfaces and connecting plates for directional control valves
|
| DIN 24343-1982
| 液壓傳動系統和元件.液壓設備的維護及檢查細目表
| Hydraulic fluid power systems and components; list for attendance and inspection of hydraulic equipments
|
| DIN 24346-1984
| 液壓傳動.液壓系統.應用的一般規則
| Hydraulic fluid power - hydraulic systems; general rules for application
|
| DIN 24550-3-1992
| 流體動力:管線內過濾器用液壓過濾器元件.包洛面尺寸
| Fluid power; hydraulic filter elements for inline filters; envelope dimensions
|
| DIN 24550-4-1992
| 流體動力:罐頂回油過濾用液壓過濾器元件.包洛面尺寸
| Fluid power; hydraulic filter elements for tank top return-line filters; envelope dimensions
|
| DIN 24550-5-1992
| 流體動力:液壓過濾器:懸掛式回油過濾器安裝尺寸
| Fluid power; hydraulic filters; tank top return-line filter fitting dimensions
|
| DIN 24550-6-1999
| 流體動力.液壓過濾器.第6部分:檢驗過濾器外殼.尺寸
| Fluid power - Hydraulic filters - Part 6: Test filter housings; dimensions
|
| DIN 24550-8-1999
| 流體動力.液壓過濾器.第8部分:離心式過濾器.過濾器和連接尺寸
| Fluid power - Hydraulic filters - Part 8: Spin-on filters; filter and connection dimensions
|
| DIN 24552-1990
| 液壓流體動力.液壓系統的液壓蓄能器.概念和一般要求
| Hydraulic fluid power; accumulators in hydraulic systems; concepts, general requirements
|
| DIN 24554-1990
| 流體動力.160巴緊密式液壓缸.安裝尺寸
| Fluidpower; hydraulic cylinder 160 bar compact; mounting dimensions
|
| DIN 24564-1-1995
| 液壓系統和元件.第1部分:特性
| Fluid power systems and components - Part 1: Characteristics
|
| DIN 24564-2-2003
| 液壓系統和元件.液壓系統用元件.第2部分:液壓缸用電位置傳感器的特性
| Fluid power systems and components - Components for hydraulic sytems - Part 2: Characteristics of electrical position transducers for hydraulic cylinders
|
| DIN 24567-1998
| 液壓.圓形蓄壓鋼瓶.尺寸、要求、試驗方法.額定容積1000-20000
| Fluid power - Round hydraulic reservoirs made of steel - Dimensions, requirements, test method - Nominal capacity 1000 to 20000
|
| DIN 24950-1-1978
| 第1部分:液壓和氣動軟管組件術語
| Oilhydraulic and pneumatic; terms for hose assemblies
|
| DIN 2781-1990
| 機床.液壓機的45°單頭鋸齒螺紋
| Machine tools; buttress thread 45°, single start, for hydraulic presses
|
| DIN 30732-1-1987
| 都市車輛用液壓系統.第1部分:設有兩套系統的冬用車輛
| Hydraulic systems for municipal vehicles; winter service vehicles with 2 hydraulic systems
|
| DIN 31653-1-1991
| 滑動軸承.穩定工作條件下液壓滑動止推軸承.墊片止推軸承計算
| Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; calculation of pad thrust bearings
|
| DIN 31653-2-1991
| 滑動軸承.穩定工作條件下液壓滑動止推軸承.墊片止推軸承計算函數
| Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; functions for calculation of pad thrust bearings
|
| DIN 31653-3-1991
| 滑動軸承.穩定工作條件液壓滑動止推軸承.墊片止推軸承計算用允許運算參數
| Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; permissible operational parameters for calculation of pad thrust bearings
|
| DIN 31657-1-1996
| 滑動軸承.穩定工作狀態液壓徑向滑動軸承.第1部分:多層軸承和斜墊止推滑動軸承計算
| Plain bearings - Hydrodynamic plain journal bearings under steadystate conditions - Part 1: Calculation of multi-lobed and tilting pad journal bearings
|
| DIN 31657-2-1996
| 滑動軸承.穩定工作狀態液壓徑向滑動軸承.第2部分:多層滑動軸承計算函數
| Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 2: Functions for calculation of multilobed journal bearings
|
| DIN 31657-3-1996
| 滑動軸承.穩定工作狀態液壓徑向滑動軸承.第3部分:斜墊止推滑動軸承計算用函數
| Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 3: Functions for calculation of tilting pad journal bearings
|
| DIN 3771-4-1984
| 液壓系統.Ｏ型密封圈.質量驗收準則
| Fluid systems; O-rings; quality acceptance criteria
|
| DIN 3771-5-1993
| 液壓系統.O型圈.計算方法和安裝空間尺寸
| Fluid systems; O-rings; methods for calculation and dimensions of housings
|
| DIN 45635-26-1979
| 機器空氣噪聲的測量.包絡面法.液壓泵
| Measurement of airborne noise emitted by machines; enveloping surface method, hydraulic pumps
|
| DIN 45635-41 Bb.1-1986
| 機器排放的噪聲測量.空氣傳播的噪聲.第41 Bb.1部分:包洛面法.液壓組件(試驗報告樣表)
| Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; hydraulic assemblies (test report specimen form)
|
| DIN 45635-41-1986
| 機器排放的噪聲測量.空氣傳播的噪聲.第41部分:包洛面法.液壓組件
| Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; hydraulic assemblies
|
| DIN 48083-3-1985
| 壓力連接件用壓力機模具.標稱壓力為300、450 和1000KN以下的液壓機.尺寸
| Dies for presses for pressure connections; hydraulical presses with a nominal compressive force up to 300, up to 450 and up to 1000 kN connecting; dimensions
|
| DIN 51308-2005
| 建筑中應用和測量力用輔助裝置的驗證.夾緊裝置、液壓缸、夾緊工具用功率計
| Verification of auxiliary devices for application and measuring of forces in building - clamp-devices, hydraulic cylinders, dynamometer for clamp aim
|
| DIN 51345-1986
| 耐火液壓液體和金屬的相容性試驗
| Testing the compatibility of fire-resistant hydraulic fluids with metals
|
| DIN 51389-1-1982
| 潤滑劑的測定.葉片泵液壓流體的機械檢驗.第1部分:一般工作原則
| Determination of lubricants; mechanical testing of hydraulic fluids in the vane-cell-pump; general working principles
|
| DIN 51389-2-1982
| 潤滑劑的測定.葉片泵液壓流體的機械檢驗.第2部分:無水液壓流體的 A 方法
| Determination of lubricants; mechanical testing of hydraulic fluids in the vane-cell-pump; method A foranhydrous hydraulic fluids
|
| DIN 51389-3-1998
| 潤滑劑的檢測.葉輪泵中液壓流體的機械試驗.第3部分:含水不易燃液壓流體的B試驗方法
| Determination of lubricants - Mechanical testing of hydraulic fluids in the vane-cell-pump - Part 3: Method B for aqueous not easily inflammable hydraulic fluids
|
| DIN 51524-1-2006
| 壓力液體.液壓油.第1部分:HL液壓油.最低要求
| Pressure fluids - Hydraulic oils - Part 1: HL hydraulic oils; Minimum requirements
|
| DIN 51524-2-2006
| 壓力液體.液壓油.第2部分:HLP液壓油.最低要求
| Pressure fluids - Hydraulic oils - Part 2: HLP hydraulic oils; Minimum requirements
|
| DIN 51524-3-2006
| 壓力液體.液壓油.第3部分:HLP液壓油.最低要求
| Pressure fluids - Hydraulic oils - Part 3: HVLP hydraulic oils; Minimum requirements
|
| DIN 53769-2-1986
| 玻璃纖維增加塑料管道檢驗.長期靜液壓試驗
| Testing of glass fibre reinforced plastics pipes; long-term hydrostatic pressure test
|
| DIN 55189-2-1988
| 機床.靜態負荷下板金加工沖壓參數的測定.第2部分:液壓機
| Machine tools; determination of the ratings of presses for sheet metal working under static load; hydraulic presses
|
| DIN 65385-1991
| 航空航天.液壓流體動力..過濾器元件.試驗數據報告
| Aerospace; hydraulic fluid power; filter elements; reporting of test data
|
| DIN 74000-1992
| 液壓制動裝置.雙回路制動裝置.制動回路圖的符號
| Hydraulic braking systems; dual circuit brake systems; symbols for brake circuits diagrams
|
| DIN 74075-1-1997
| 載重汽車和鞍式牽引機構液壓聯軸器.第1部分:液壓聯軸器要求
| Hydraulic couplings on lorries and semi-trailer towing vehicles - Part 1: Location of hydraulic couplings
|
| DIN 74200-1991
| 液壓制動系統.液壓缸.尺寸和安裝說明
| Hydraulic braking systems; cylinders; dimensions, instructions for installation
|
| DIN 74225-1991
| 液壓制動軟管組件.制動用軟管接頭.制動軟管夾
| Brake hose assemblies; brake hose fittings; brake hose clips
|
| DIN 74233-1-1991
| 液壓制動系統.制動管道配件.第1部分:制動管道外用配件
| Hydraulic braking systems; fittings for brake pipes; male fittings for brake pipes
|
| DIN 74233-2-1991
| 液壓制動系統.制動管道配件.第2部分:制動管道管接螺母
| Hydraulic braking systems; fittings for brake pipes; union nuts for brake pipes
|
| DIN 74234-1992
| 液壓制動系統.擴口的制動液壓管
| Hydraulic braking systems; brake pipes, flares
|
| DIN 74235-1991
| 液壓制動系統.螺紋孔
| Hydraulic braking systems; tapped holes
|
| DIN 8584-7-2003
| 在拉伸和加壓復合條件下復合成形的制造工藝.第7部分:液壓成形加寬.分類、細類、術語和定義
| Manufacturing processes forming under combination of tensile and compressive conditions - Part 7: Hydroforming widening; Classification, subdivision, terms and definitions
|
| DIN EN 10246-2-2000
| 鋼管的無損檢驗.第2部分:證明液壓滲漏密封性的無縫和焊接(埋弧焊接除外)的奧氏體和鐵素體/奧氏體鋼管的自動
| Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and ferritic-austenitic steel tubes for verification of hydraulic leak-tightness; German version EN 10246-2:2000
|
| DIN EN 10275-1999
| 金屬材料.管環液壓壓力試驗
| Metallic materials - Tube ring hydraulic pressure test; German version EN 10275:1999
|
| DIN EN 10305-4-2003
| 精密裝置用鋼管.交貨技術條件.第4部分:液壓和氣動系統用無縫冷拉管
| Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems; German version EN 10305-4:2003
|
| DIN EN 10305-6-2005
| 精密儀器用鋼管.交貨技術條件.第6部分:液壓和氣動動力系統用焊接冷拉管材
| Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems; German version EN 10305-6:2005
|
| DIN EN 12107-1997
| 塑料管道系統.注塑熱塑性塑料配件、閥門和附件.注塑熱塑材料管件持久靜液壓強度的測定
| Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components; German version EN 12107:1997
|
| DIN EN 12162-2001
| 液體泵.安全要求.靜液壓試驗過程
| Liquid pumps - Safety requirements - Procedure for hydrostatic testing; German version EN 12162:2001
|
| DIN EN 12312-19-2005
| 飛行器地面支持設備.特殊要求.第19部分:飛行器架、軸架和液壓尾翼支柱
| Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions; German version EN 12312-19:2005
|
| DIN EN 12332-2-2003
| 橡膠或塑料涂層織物.破裂強度測定.第2部分:液壓法
| Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method; German version EN 12332-2:2002
|
| DIN EN 12622-2001
| 機床.機床安全性.液壓制動器
| Machine tools - Safety of machine tools - Hydraulic press brakes; German version EN 12622:2001
|
| DIN EN 12706-1999
| 膠粘劑.液壓固化地板鏝光和/或整平化合物的試驗方法.流動性的測定
| Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics; German version EN 12706:1999
|
| DIN EN 12952-14-2004
| 水管鍋爐和輔助設備.第14部分:使用液壓氨和氨水溶液的廢氣DENOX系統的要求
| Water-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution; German version EN 12952-14:2004
|
| DIN EN 13204-2005
| 消防和救生服務用雙動液壓救生工具.安全和性能要求
| Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements; German version EN 13204:2004
|
| DIN EN 13242-2003
| 土木工程和道路建筑用非結合和液壓結合材料用集料
| Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction; German version EN 13242:2002
|
| DIN EN 13408-2002
| 液壓固化地板平整復合物試驗方法.粘附拉伸強度測定
| Method of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength; German version EN 13408:2002
|
| DIN EN 13409-2002
| 液壓固化地板平整復合物的試驗方法.固化時間測定; 德文版本 EN 13409:2002
| Method of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time; German version EN 13409:2002
|
| DIN EN 13433-2006
| 防飲用水回流污染設備.液壓驅動機械分離器.族G,A型
| Devices to prevent pollution by backflow of potable water - Mechanical disconnector, direct actuated - Family G, type A; German version EN 13433:2006
|
| DIN EN 13434-2006
| 防飲用水回流污染設備.液壓驅動機械分離器.族G,B型
| Devices to prevent pollution by backflow of potable water - Mechanical disconnector, hydraulic actuated - Family G, type B; German version EN 13434:2006
|
| DIN EN 13802-2005
| 鐵路設施.懸掛部件.液壓減震器
| Railway applications - Suspension components - Hydraulic dampers; German version EN 13802:2004
|
| DIN EN 13851-2004
| 液壓樓層校平和/或水平層復合物的試驗方法.抗彎曲及抗壓強度的測定
| Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of flexural and compressive strength; German version EN 13851:2003
|
| DIN EN 1397-1999
| 熱交換器.液壓間風扇線圈裝置.性能確定的試驗方法
| Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance; German version EN 1397:1999
|
| DIN EN 14227-13-2006
| 液力粘結混合料.規范.第13部分:液壓道路粘結劑處理的土壤
| Hydraulically bound mixtures - Specifications - Part 13: Soil treated by hydraulic road binder; German version EN 14227-13:2006
|
| DIN EN 14653-1-2005
| 土方工程支撐用手動液壓支撐系統.第1部分:產品規范
| Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications; German version EN 14653-1:2005
|
| DIN EN 14653-2-2005
| 土方工程支撐用手動液壓支撐系統.第2部分:通過計算或試驗評定
| Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test; German version EN 14653-2:2005
|
| DIN EN 1487-2000
| 建筑物閥門.液壓安全類.試驗和要求
| Building valves - Hydaulic safety groups - Tests and requirements; German version EN 1487:2000
|
| DIN EN 1777-2005
| 消防和救援設備用液壓平臺.安全要求和檢驗
| Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing; German version EN 1777:2004
|
| DIN EN 1804-1-2003
| 地下采礦機械.液壓護頂支撐物安全性要求.第1部分:支撐裝置和一般要求
| Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements; German version EN 1804-1:2001
|
| DIN EN 1804-2-2003
| 地下采礦機械.液壓頂棚支撐安全性要求.第2部分:動力裝置的支柱和作動筒
| Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams; German version EN 1804-2:2001
|
| DIN EN 1804-3-2006
| 地下采礦機械.液壓頂棚支撐安全性要求.第3部分:液壓控制系統
| Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems; German version EN 1804-3:2006
|
| DIN EN 1937-1999
| 膠粘劑.液壓固化地板鏝光和/或整平化合物的檢驗方法.標準混合法
| Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures; German version EN 1937:1999
|
| DIN EN 2622-2003
| 航空航天系列.直徑為3.2mm D 100mm的耐熱合金液壓圓形管.尺寸
| Aerospace series - Circular tubes, for fluids in heat resisting alloys, diameter 3,2 mmD100 mm - Dimensions; German and English version EN 2622:2001
|
| DIN EN 26802-1993
| 金屬絲增強的橡膠和塑料軟管組件.撓曲狀態下液壓脈沖試驗
| Rubber and plastics hose and hose assemblies with wire reinforcements; hydraulic impulse test with flexing (ISO 6802:1991); german version EN 26802:1993
|
| DIN EN 474-5-1996
| 土方機械.安全性.第5部分:液壓挖掘機要求
| Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators; German version EN 474-5:1996
|
| DIN EN 50340-2002
| 液壓電纜切割裝置.標稱電壓為交流30kV以下的電氣設備用裝置
| Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV; German version EN 50340:2001
|
| DIN EN 62237-2005
| 帶電作業.液壓工具和設備用帶配件的絕緣軟管
| Live working - Insulating hoses with fittings for use with hydraulic tools and equipment (IEC 62237:2003, modified); German version EN 62237:2005
|
| DIN EN 752-4-1997
| 建筑物外部排水系統.第4部分:液壓設計和對環境的考慮
| Drain and sewer systems outside buildings - Part 4: Hydraulic design and environmental considerations; German version EN 752-4:1997
|
| DIN EN 773-1999
| 液壓排水管道構件一般要求
| General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers; German version EN 733:1999
|
| DIN EN 81-2-2000
| 升降機建造和安裝的安全規則.第2部分:液壓升降機
| Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts (includes corrigendum AC:1999); German version EN 81-2:1998 + AC:1999
|
| DIN EN 81-2/A1-2006
| 電梯建造和安裝的安全規則.第2部分:液壓升降機.德文版本EN 81-2:1998/A1-2005
| Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts; German version EN 81-2:1998/A1:2005
|
| DIN EN 81-2/A2-2005
| 升降機施工和安裝的安全規則.第2部分:液壓升降機.A2:機械和滑輪間隔
| Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts - A2: Machinery and pulley spaces; German version EN 81-2:1998/A2:2004
|
| DIN EN 81-3-2001
| 升降機制造和安裝安全規則.第3部分:電動升降機和液壓升降機
| Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts; German version EN 81-3:2000
|
| DIN EN 853-1997
| 橡膠軟管和軟管組件.帶金屬絲編織層的液壓軟管.規范
| Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification; German version EN 853:1996
|
| DIN EN 854-1997
| 橡膠軟管和軟管組件.帶織物編織層的液壓軟管.規范
| Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification; German version EN 854:1996
|
| DIN EN 855-1997
| 塑料軟管和軟管組件.帶織物編織層的塑料液壓軟管.規范
| Plastic hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification; German version EN 855:1996
|
| DIN EN 856-1997
| 橡膠軟管和軟管組件.帶金屬絲螺旋墊層的液壓軟管.規范
| Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification; German version EN 856:1996
|
| DIN EN 857-1997
| 橡膠軟管和軟管組件.帶金屬絲編織層的緊湊型液壓軟管.規范
| Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification; German version EN 857:1996
|
| DIN EN 911-1995
| 塑料管道系統.熱塑塑料壓力管道用的彈性密封環型接頭和機械接頭的連接.外部靜力液壓條件下的防漏試驗方法;
| Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure; German version EN 911:1995
|
| DIN EN 982-1996
| 機械安全性.液壓系統 及其部件的安全要求.液壓裝置
| Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics; German version EN 982:1996
|
| DIN EN 983-1996
| 機械安全性.液壓系統及其部件的安全要求.氣動裝置
| Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics; German version EN 983:1996
|
| DIN EN ISO 10592-1995
| 小型船舶.液壓操縱系統 (ISO 10592:1994); 德文版本 EN ISO 10592:1995
| Small craft - Hydraulic steering systems (ISO 10592:1994); German version EN ISO 10592:1995
|
| DIN EN ISO 12922-2002
| 潤滑劑、工業用油和相關產品(L級).H類(液壓體系).HFAE、 HFAS、HFB、HFC、HFDR和HFDU的目錄規范 (ISO 12922
| Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:1999, including Technical Corrigendum 1:2001); German version EN ISO 12922:2002
|
| DIN EN ISO 13938-1-1999
| 紡織品.織物破裂特性.第1部分:脹破強度和脹破力測定的液壓方法
| Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:1999); German version EN ISO 13938-1:1999
|
| DIN EN ISO 1402-1996
| 橡膠和塑料軟管及軟管組件.液壓靜力試驗
| Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:1994); German version EN ISO 1402:1996
|
| DIN EN ISO 19879-2005
| 液壓傳動和通用金屬管連接.液壓傳動連接的試驗方法
| Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2005); German version EN ISO 19879:2005
|
| DIN EN ISO 20763-2004
| 石油和相關產品.液壓液耐磨性能的測定.葉片泵法
| Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004); German version EN ISO 20763:2004
|
| DIN EN ISO 4263-2-2003
| 石油及相關產品.防腐蝕礦物油和液體老化性的測定.TOST試驗.第2部分:HFC類液壓液測定規程
| Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids; TOST test - Part 2: Procedure for class HFC hydraulic fluids (ISO 4263-2:2003); German version EN ISO 4263-2:2003
|
| DIN EN ISO 4404-2-2003
| 石油和相關產品.難燃液壓液抗腐蝕性的測定.第2部分:不含水液體
| Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2003); German version EN ISO 4404-2:2003
|
| DIN EN ISO 5198-1999
| 離心泵、混流泵和軸流泵.液壓性能試驗規范.精密級
| Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class (ISO 5198:1987); German version EN ISO 5198:1998
|
| DIN EN ISO 6743-4-2002
| 潤滑劑、工業用潤滑油和相關產品(L類).分類.第4部分:H族(液壓系統)
| Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4:1999); German version EN ISO 6743-4:2001
|
| DIN EN ISO 6803-1997
| 橡膠和塑料軟管及軟管組件.無彎曲液壓壓力脈沖試驗
| Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:1994); German version EN ISO 6803:1997
|
| DIN EN ISO 8032-1999
| 橡膠和塑料軟管組件.結合液壓脈沖試驗的軟管彎曲試驗(半Ω 型彎曲試驗)
| Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997); German version EN ISO 8032:1999
|
| DIN EN ISO 8434-1-1997
| 液壓傳動和通用連接件.第1部分:24度喇叭形壓合接頭
| Metallic tube connections for fluid power and general use - Part 1: 24° compression fittings (ISO 8434-1:1994); German version EN ISO 8434-1:1997
|
| DIN EN ISO 8434-4-2000
| 液壓及通用金屬管件連接.第4部分:接頭焊有O形密封圈的24度錐體連接件
| Metallic tube connections for fluid power and general use - Part 4: 24° cone connectors with O-ring weld-on nipples (ISO 8434-4:1995); German version EN ISO 8434-4:2000
|
| DIN EN ISO 9080-2003
| 塑料管道和導管系統.用外推法測定熱塑性塑料管材的長期靜液壓強度
| Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003); German version EN ISO 9080:2003
|
| DIN EN ISO 9906-2002
| 旋轉式動力泵.液壓性能驗收試驗.等級1和2 (ISO 9906:1999); 德文版本 EN ISO 9906:1999
| Rotodynamic pumps - Hydraulic performance acceptance test - Grades 1 and 2 (ISO 9906:1999); German version EN ISO 9906:1999
|
| DIN EN ISO 9974-2-2000
| 通用和液壓傳動用聯接件.用ISO261彈性螺紋或金屬與金屬密封的氣門和雙頭螺栓端頭.第2部分:(E型)帶彈性密封
| Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996); German version EN ISO 9974-2:2000
|
| DIN ISO 10448-1999
| 農用拖拉機.機具的液壓系統
| Agricultural tractors - Hydraulic pressure for implements (ISO 10448:1994)
|
| DIN ISO 10627-2-1999
| 農用機械和拖拉機.農作物液壓噴灌設備.第2部分:部件數據單
| Agricultural machinery and tractors - Hydraulic agricultural sprayers - Part 2: Data sheets for components (ISO 10627-2:1992)
|
| DIN ISO 10763-2004
| 液壓傳動.端面平齊的無縫和焊接型精密鋼管.尺寸和標稱工作壓力
| Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures (ISO 10763:1994)
|
| DIN ISO 10766-1998
| 液壓流體動力液壓缸.活塞和連桿的矩形截面軸承環的殼體尺寸
| Hydraulic fluid power, cylinders - Housing dimensions for rectangular-section-cut bearing rings for pistons and rods (ISO 10766:1996)
|
| DIN ISO 11217-1994
| 航空航天.液壓系列流體污染物.取樣點定位和取樣準則
| Aerospace; hydraulic system fluid contamination; location of sampling points and criteria for sampling; identical with ISO 11217:1993
|
| DIN ISO 11218-1994
| 航空航天.液壓流液污染度的分類
| Aerospace; cleanlinless classification for hydraulic fluids; identical with ISO 11218:1993
|
| DIN ISO 11471-1997
| 農用拖拉機和機具.遙控液壓裝置和控制裝置編碼
| Agricultural tractors and machinery - Coding of remote hydraulic power services and controls (ISO 11471:1995)
|
| DIN ISO 12151-2-2004
| 液壓傳動和通用連接件.軟管接頭.第2部分:帶ISO 8434-1和8434-4 24°錐形連接件末端和O形圈的軟管接頭
| Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings (ISO 12151-2:2003)
|
| DIN ISO 12151-3-2004
| 液壓傳動和通用連接件.軟管接頭.第3部分:帶ISO 6162法蘭末端的軟管接頭
| Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162 flange ends (ISO 12151-3:1999)
|
| DIN ISO 1219-1-1996
| 液壓傳動系統和部件.圖形符號和線路圖.第1部分:圖形符號
| Fluid power systems and components - Graphic symbols and circuit diagrams - Part 1: Graphic symbols (ISO 1219-1:1991)
|
| DIN ISO 1219-2-1996
| 液壓動力系統和部件.圖形符號和線路圖.第2部分:線路圖
| Fluid power systems and components - Graphic symbols and circuit diagrams - Part 2: Circuit diagrams (ISO 1219-2:1995)
|
| DIN ISO 12238-2005
| 液壓傳動.方向控制閥門.移動時間測量(ISO 12238-2001)
| Pneumatic fluid power - Directional control valves - Measurement of shifting time (ISO 12238:2001)
|
| DIN ISO 15171-1-2004
| 流體傳動和一般用途管接頭.診斷用液壓管接頭.第1部分:非壓力下連接的管接頭
| Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure (ISO 15171-1:1999)
|
| DIN ISO 15171-2-2004
| 流體傳動和一般用途管接頭.診斷用液壓管接頭.第2部分:帶M12 2螺紋端的壓力連接接頭
| Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Couplings with M 16 × 2 end for connection under pressure (ISO 15171-2:2000)
|
| DIN ISO 15380-2004
| 潤滑油、工業用油和相關產品(L級).H族(液壓系統).HETG、HEPG、HEES和HEPR類規范說明
| Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HETG, HEPG, HEES and HEPR (ISO 15380:2002)
|
| DIN ISO 21287-2005
| 液壓傳動.儲氣瓶.1000 kPa (10 bar) 系列、 20 mm到 100 mm 內徑的小型氣瓶(ISO 21287-2004)
| Pneumatic fluid power - Cylinders - Compact cylinders, 1 000 kPa (10 bar) series, bores from 20 mm to 100 mm (ISO 21287:2004)
|
| DIN ISO 2941-1983
| 液壓傳動.濾芯.抗破裂性/爆破性檢驗
| Hydraulic fluid power; filter elements; verification of collapse/burst resistance
|
| DIN ISO 3019-1-2004
| 液壓傳動.容積泵和馬達的安裝法蘭和軸伸的尺寸及標注代號.第1部分:用米制單位表示的英制系列
| Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 1: Inch series shown in metric units (ISO 3019-1:2001)
|
| DIN ISO 3019-2-2004
| 液壓傳動.容積式泵和馬達的安裝法蘭和軸伸的尺寸及標注代號.第2部分:米制系列
| Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2: Metric series (ISO 3019-2:2001)
|
| DIN ISO 3320-2001
| 液壓系統和元件.缸徑和活塞桿直徑.米制系列
| Fluid power systems and components - Cylinder bores and piston rod diameter - Metric series (ISO 3320:1987)
|
| DIN ISO 3322-2001
| 液壓系統和元件.作動筒.公稱壓力
| Fluid power systems and components - Cylinders - Nominal pressures (ISO 3322:1985)
|
| DIN ISO 3323-1985
| 航空器..液壓元件.表明液壓元件已被批準適用油液的標志
| Aircraft; hydraulic components; marking to indicate fluid for which component is approved
|
| DIN ISO 3724-1990
| 液壓流體動力.濾芯.流動疲勞特性的驗證
| Hydraulic fluid power; filter elements; verification of flow fatigue characteristics; identical with ISO 3724:1976
|
| DIN ISO 3803-1990
| 道路車輛.制動設備的液壓試驗連接件
| Road vehicles hydraulic pressure test connection for braking equipment; identical with ISO 3803:1984
|
| DIN ISO 4391-1984
| 液壓傳動.泵、電動機和整體式傳動裝置.參數定義和字母符號
| Hydraulic fluid power; pumps, motors and integral transmissions; parameter definitions and letter symbols
|
| DIN ISO 4393-1984
| 液壓傳動系統和元件.缸.活塞行程的基本系列
| Fluid power systems and components; cylinders; basic series of piston strokes
|
| DIN ISO 4395-1985
| 液壓傳動系統和元件.汽缸.活塞桿螺紋尺寸和型式.等同采用ISO 4395-1985版本
| Fluid power systems and components; cylinders; piston rod thread dimensions and types; identical with ISO 4395, edition 1978
|
| DIN ISO 4409-1994
| 液壓里動力.正排量泵、電動機和整體傳動裝置.靜態穩定性的測定
| Hydraulic fluid power; positive displacement pumps, motors and integral transmissions; determination of steady-state performance; identical with ISO 4409:1986
|
| DIN ISO 4548-5-1993
| 內燃機.全流式機油濾清器的試驗方法.冷起動模擬和液壓脈沖耐久性試驗
| Internal combustion engines; methods of test for full-flow lubricating oil filters; cold start simulation and hydraulic pulse durability test; identical with ISO 4548-5:1990
|
| DIN ISO 4926-1979
| 道路車輛.液壓制動系統.非石油基基準液
| Road Vehicles; Hydraulic Brake Systems, Non-petroleum Base Reference Fluids
|
| DIN ISO 4928-1982
| 道路車輛.使用非石油基液壓制動液的液壓制動系統缸體的彈性罩和密封件(最大工作溫度120℃)
| Road vehicles; elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 120 °C max.)
|
| DIN ISO 5597-1988
| 液壓流體動力.液壓缸.往復作用的活塞和活塞桿的密封腔.尺寸和公差
| Hydraulic fluid power; cylinders; housings for piston and rod seals in reciprocating applications; dimensions and tolerances; identical with ISO 5597:1987
|
| DIN ISO 5884-1989
| 航空航天.流體系統和部件.液壓流體中固體微粒污染的系統取樣和測量方法
| Aerospace; fluid systems and components; methods for system sampling and measuring the solid particle contamination of hydraulic fluids; identical with ISO 5884:1987
|
| DIN ISO 6020-1-2001
| 液壓.16MPa(160 bar)系列單桿作動筒裝配尺寸.第1部分:中型系列
| Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPA (160 bar) series - Part 1: Medium series (ISO 6020-1:1998)
|
| DIN ISO 6149-1-1996
| 液壓傳動連接和普通連接.油口和帶ISO 261螺紋和O型環密封的螺柱端頭.第1部分:載頭殼體內帶O形環的油口
| Connections for fluid power and general use - Ports and stud ends with ISO 261 threads and O-ring sealing - Part 1: Ports with O-ring seal in truncated housing (ISO 6149-1:1993)
|
| DIN ISO 6149-3-1996
| 液壓傳動連接和普通連接.油口和帶ISO 261螺紋和O型環密封的螺柱端頭.第3部分:輕載(L系列)螺柱端頭.尺寸、設
| Connections for fluid power and general use - Ports and stud ends with ISO 261 threads and O-ring sealing - Part 3: Light duty (L series) stud ends; dimensions, design, test methods and requirements (ISO 6149-3:1993)
|
| DIN ISO 6162-1-2006
| 液壓傳動.帶分離式或一體式法蘭夾和米制或英制螺紋的凸緣連接器.第1部分:壓力為3.5MPa至35MPa(35巴至350巴)
| Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 (ISO 6162-1:2002 + Cor. 1:2004)
|
| DIN ISO 6162-2-2006
| 液壓傳動.帶分離式或一體式法蘭夾和米制或英制螺紋的凸緣連接器.第2部分:壓力為35MPa至40MPa(350巴至400巴)
| Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 2: Flange connectors for use at pressures of 35 MPa (350) to 40 MPa (400 bar), DN 13 to DN 51 (ISO 6162-2:2002)
|
| DIN ISO 6195-1989
| 流體動力系統和組件.液壓筒.往復作動用的刮垢環外罩.尺寸和公差
| Fluid power systems and components; cylinders; housings for rod wiper rings in reciprocating applications; dimensions and tolerances; identical with ISO 6195:1986
|
| DIN ISO 6547-1983
| 液壓流體動力.裝有軸承環的活塞密封殼體.尺寸和允公差
| Hydraulic fluid power-cylinder; piston seal housings incorporating bearing rings; dimensions and tolerances
|
| DIN ISO 6772-1996
| 航空航天.流體系統.液壓軟管、管道和連接組件的脈沖試驗 (ISO 6772:1988)
| Aerospace - Fluid systems - Impulse testing of hydraulic hose, tubing and fitting assemblies (ISO 6772:1988)
|
| DIN ISO 7181-2001
| 液壓系統和元件.作動筒.缸筒和活塞桿截面比
| Hydraulic power systems and components - Cylinders - Bore and rod area ratios (ISO 7181:1991)
|
| DIN ISO 7368-1994
| 液壓流體動力.兩通口筒形插入閥.閥腔
| Hydraulic fluid power; two-port slip-in cartridge valves; cavities; identical with ISO 7368:1989
|
| DIN ISO 7425-1-1990
| 液壓傳動.彈性體賦能塑料面密封溝槽.尺寸和公差.活塞密封溝槽
| Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; piston seal housings; identical with ISO 7425-1:1988
|
| DIN ISO 7425-2-1990
| 液壓傳動.彈性體賦能塑料面密封溝槽.尺寸和公差.第2部分:活塞桿密封溝槽
| Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; rod seal housings; identical with ISO 7425-2:1989
|
| DIN ISO 7632-1986
| 道路車輛.使用石油基液壓制動液的液壓盤式制動液壓缸的彈性密封墊件(最大工作溫度120℃)
| Road vehicles; elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 °C max.); identical with ISO 7632, edition 1985
|
| DIN ISO 789-10-1999
| 農用拖拉機和機械.拖拉機的試驗程序.第10部分:機具的液壓系統
| Agricultural tractors and machinery - Tractors; Test procedures - Part 10: Hydraulic pressure for implements (ISO 789-10:1996)
|
| DIN ISO 8426-1994
| 液壓流體動力.正排量泵和電動機.推導容積的測定
| Hydraulic fluid power; positive displacement pumps and motors; determination of derived capacity; identical with ISO 8426:1988
|
| DIN ISO 8575-1998
| 航空航天.流體系統.液壓系統管道
| Aerospace - Fluid systems - Hydraulic system tubing (ISO 8575:1990)
|
| DIN V ENV 13282-2002
| 液壓道路粘合劑.組分、規范和一致性標準; 德文版本 ENV 13282:2000
| Hydraulic road binders - Composition, specifications and conformity criteria; German version ENV 13282:2000
|
| DIN-Fachbericht CEN/TR 14489-2006
| 耐火液壓液.分類和規范.安全、健康和環境保護的選擇指南
| Fire-resistant hydraulic fluids - Classification and specification - Guidelines on selection for the protection of safety, health and the environment; German version CEN/TR 14489:2005
|
| 編號 | 中文名稱 | 英文名稱 |
|---|