| 編號 | 中文名稱 | 英文名稱 |
|---|
| EN 10246-1-1996
| 鋼管的無損檢測 第1部分：證明液壓密封性用無縫和焊接鐵磁鋼管(埋弧焊除外)的自動電磁檢驗
| Non destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
|
| EN 10246-2-2000
| 鋼管的無損檢測 第2部分：證明液壓密封性用無縫和焊接奧氏體和奧氏體鐵素體鋼管（埋弧焊除外） 的自動渦流
| Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness
|
| EN 10275-1999
| 金屬材料 管式環液壓試驗
| Metallic materials - Tube ring hydraulic pressure test
|
| EN 10305-4-2003
| 高精密度用途的鋼管 交貨技術條件 第4部分：液壓和氣動系統用冷拔無縫鋼管
| Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
|
| EN 12107-1997
| 塑料管道系統 壓注熱塑管件、閥門和輔助設備 管道組件壓注用熱塑 材料的長期液壓強度的測定
| Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
|
| EN 12622-2001
| 液壓彎板機 機床安全
| Safety of machine tools - Hydraulic press brakes
|
| EN 13242-2002
| 土木工程作業和公路建設中使用的非粘結和液壓粘結材料集料
| Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
|
| EN 1397-1998
| 熱交換器 室內液壓電扇線圈元件 確定性能的試驗程序
| Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance
|
| EN 474-5-1996
| 土方機械 安全 第5部分：液壓挖掘機的要求
| Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
|
| EN 50289-3-15-2003
| 通信電纜 試驗方法規范 第3-15部分：機械試驗方法 水下電纜耐液壓／注意：和EN 50289-3-1聯合使用
| Communication cables - Specifications for test methods - Part 3-15: Mechanical test methods; Underwater cable resistance to hydrostatic pressure / Note: Applies in conjunction with EN 50289-3-1
|
| EN 50340-2001
| 液壓電纜切割器 在額定電壓高達AC 30 kV的電氣設施上使用的裝置
| Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV / Note: Includes Corrigendum of February 2002
|
| EN 693-2001
| 機械工具 安全 液壓壓力機
| Machine tools - Safety - Hydraulic presses
|
| EN 752-4-1997
| 室外建筑物的排水系統 第4部分：液壓設計和環境考慮
| Drain and sewer systems outside buildings - Part 4: Hydraulic design and environmental considerations
|
| EN 773-1999
| 液壓排放管、排水管和污水管構件的一般要求
| General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers
|
| EN 804-1994
| 塑料管道系統 壓力管道溶焊接頭的噴射鑄造插接部件 瞬時內部液壓阻力的試驗方法
| Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure
|
| EN 81-2-1998+AC-1999
| 電梯建造和安裝的安全規則 第2部分：液壓梯
| Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts / Note: To be amended by EN 81-2/prA1 (2003-07).
|
| EN 81-2/prA1-2003
| 電梯建造和安裝的安全規則 第2部分：液壓梯 修改A1
| Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts; Amendment A1 / Note: Intended as an amendment to EN 81-2 (1998-08).
|
| EN 81-2/prA2-2000
| 電梯建造和安裝的安全規則 第2部分：液壓梯 修改A2：機械和滑輪空間
| Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts; A2: Machinery and pulley spaces
|
| EN 81-3-2000
| 電梯建造和安裝的安全規則 第3部分：電和液壓維修電梯
| Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts
|
| EN 853-1996
| 橡膠軟管和軟管配件 金屬絲編織加強液壓型 規范
| Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
|
| EN 854-1996
| 橡膠軟管和軟管配件 紡織增強液壓型 規范
| Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
|
| EN 855-1996
| 塑料軟管和軟管配件 熱塑料織物增強液壓型 規范
| Plastics hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification
|
| EN 856-1996
| 橡膠軟管和軟管配件 橡膠 包覆螺形線增強液壓型 規范
| Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification
|
| EN 857-1996
| 橡膠軟管和軟管配件 液壓設備用金屬絲編織增強壓制型 規范
| Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification
|
| EN 911-1995
| 塑料管道系統 熱塑塑料壓力管道用的彈性密封環型接頭和機械接頭 外部液壓條件下防漏密封試驗方法
| Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure
|
| EN 982-1996
| 機械的安全 流體動力系統及其元件的安全要求 液壓裝置
| Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
|
| EN ISO 10592-1995+A1-2000
| 小艇 液壓操舵系統
| Small craft - Hydraulic steering systems (ISO 10592:1994)
|
| EN ISO 12922-2002
| 潤滑劑、工業潤滑油和有關產品(L類) H組(液壓系統)HFAE、HFAS、 HFB、 HFC、 HFDR 和HFDU各品種的規格(包
| Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:1999, including Technical Corrigendum 1:2001)
|
| EN ISO 13938-1-1999
| 紡織品 織物脹破特性 第1部分：脹破強力測定的液壓方法
| Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:1999)
|
| EN ISO 1402-1996
| 橡膠和塑料軟管和軟管組件 液壓試驗
| Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:1994)
|
| EN ISO 4263-2-2003
| 石油和相關產品 抗氧化油及液體老化性能的測定 TOST試驗 第2部分：HFC級液壓液試驗程序
| Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids; TOST test - Part 2: Procedure for category HFC hydraulic fluids (ISO 4263-2:2003)
|
| EN ISO 4404-2-2003
| 石油與相關產品 阻燃液壓油防腐蝕性的測定 第3部分：無水液體
| Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2003)
|
| EN ISO 5198-1998
| 離心泵、混流泵和軸流泵 液壓性能試驗規范 精密級
| Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class (ISO 5198:1987)
|
| EN ISO 6743-4-2001
| 潤滑劑、工業潤滑油和有關產品(L類) 分類 第4部分：H組(液壓系統)
| Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4:1999)
|
| EN ISO 6803-1997
| 橡膠或塑料軟管和軟管組件 無彎曲的液壓脈沖試驗
| Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:1994)
|
| EN ISO 8032-1999
| 橡膠和塑料軟管和軟管組件 液壓脈沖彎曲試驗(半歐姆型試驗)
| Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997)
|
| EN ISO 9906-1999
| 回轉動力泵 液壓性能驗收試驗 等級1和2
| Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2 (ISO 9906:1999)
|
| EN ISO 9974-1-2000
| 通用和液壓傳動用聯接件 帶ISO 261 彈性螺紋或金屬 金屬密封的氣門和雙頭螺栓端頭 第1部分：螺紋氣門
| Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 9974-1:1996)
|
| EN ISO 9974-2-2000
| 通用和液壓傳動用聯接件 帶ISO 261 彈性螺紋或金屬 金屬密封的氣門和雙頭螺栓端頭 第2部分：彈性密封的
| Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996)
|
| EN ISO 9974-3-2000
| 通用和液壓傳動用聯接件 帶ISO 261 彈性螺紋或金屬 金屬密封的氣門和雙頭螺栓端頭 第3部分：金屬 金屬
| Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996)
|
| prEN 10305-6-1999
| 高精密度用途的鋼管 交貨技術條件 第6部分：液壓和氣動系統用冷拔焊接鋼管
| Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
|
| prEN 12312-19-1999
| 航空地面輔助設備 特殊要求 第19部分：飛機起重器、軸式起重器和液壓尾柱
| Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions
|
| prEN 13204-1998
| 用于消防和營救服務的雙重作用液壓救援工具
| Double acting hydraulic rescue tools for fire and rescue service use
|
| prEN 13802-2000
| 鐵路設備 懸掛構件 液壓減振沖器
| Railway applications - Suspension components - Hydraulic dampers
|
| prEN 14227-1-2001
| 未粘合及液壓粘合的混合物 規范 第1部分：公路路基和底基層用水泥粘合混合物
| Unbound and hydraulically bound mixtures - Specifications - Part 1: Cement bound mixtures for road bases and subbases
|
| prEN 14227-2-2001
| 未粘合及液壓粘合的混合物 規范 第2部分 礦渣粘合混合物 定義、成分、分類
| Unbound and hydraulically bound mixtures - Specifications - Part 2: Slag bound mixtures - Definitions, composition, classification
|
| prEN 14227-3-2001
| 未粘合及液壓粘合的混合物 規范 第3部分： 粘合混合物用灰分 定義、成分、分類
| Unbound and hydraulically bound mixtures - Specifications - Part 3: Fly ash for bound mixtures - Definitions, composition, classification
|
| prEN 14227-4-2001
| 未粘合及液壓粘合的混合物 規范 第4部分：液壓粘合混合物用灰分 定義、成分、分類
| Unbound and hydraulically bound mixtures - Specifications - Part 4: Fly ash for hydraulically bound mixtures; Definitions, composition, classification
|
| prEN 14227-5-2002
| 未粘合及液壓粘合的混合物 規范 第5部分 用液壓道路粘合劑粘合的粒狀物料 規范 第3部分：定義、成份、
| Unbound and hydraulically bound mixtures - Specifications - Part 5: Granular materials bound with hydraulic road binders; Definitions, composition, classification
|
| prEN 14359-2002
| 液壓動力設備的氣壓蓄能器
| Gas-loaded accumulators for fluid power applications
|
| prEN 4382-1997
| 航空航天系列 固溶處理耐熱合金 NI-PH3601 (NiCr22Mo9Nb) 液壓用無縫管 D≤50 mm、a≤3 mm
| Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) solution treated - Seamless tubes for hydraulic application D 50 mm, a 3 mm
|
| prEN 474-5-2001
| 土方機械 安全 第5部分：液壓挖掘機的要求
| Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
|
| 編號 | 中文名稱 | 英文名稱 |
|---|