| 編號 | 中文名稱 | 英文名稱 |
|---|
| BS 3900-J13-2001
| 涂料的試驗方法.涂覆粉試驗.用激光衍射法分析粒徑
| Methods of test for paints - Testing of coating powders - Particle size analysis by laser diffraction
|
| BS 5381-2-1998
| 煙草和煙草制品物理特性測定方法.第2部分:用激光束測量儀器測定卷煙和濾嘴標準直徑
| Methods for determination of physical properties of tobacco and tobacco products - Nominal diameter of cigarettes and filter rods using a laser beam measuring apparatus
|
| BS 6955-1-1994
| 振動和沖擊傳感器的校準.采用激光干涉測量法對主振動的校準方法
| Calibration of vibration and shock pick-ups - Methods for primary vibration calibration by laser interferometry
|
| BS 7334-6-1992
| 建筑施工用測量儀器.第6部分:激光儀器使用精度的測定方法
| Measuring instruments for building construction - Methods for determining accuracy in use of laser instruments
|
| BS DD IEC/PAS 61280-2-10-2003
| 纖維光學通信子系統試驗程序.數字系統.激光發射機的時間分辨線性調頻脈沖和α因數測量
| Fibre optic communication subsystem test procedures - Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters
|
| BS EN 12254-1999
| 激光工作場所用屏幕.安全要求和試驗
| Screens for laser working places - Safety requirements and testing
|
| BS EN 12584-1999
| 氧氣火焰切割、激光束切割和等離子體切割缺陷.術語
| Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology
|
| BS EN 15042-1-2006
| 覆層厚度測量和表面波紋表征.采用激光感應表面聲波法對各膜層的彈性常數、密度和厚度的測定指南
| Thickness measurement of coatings and characterization of surfaces with surface waves - Guide to the determination of elastic constants, density and thickness of films by laser induced surface acoustic waves
|
| BS EN 207-1999
| 眼睛保護.抗激光輻射用濾光鏡和護目器(激光護目鏡)
| Personal eye-protection - Filters and eye-protectors against laser radiation (laser eye-protectors)
|
| BS EN 208-1999
| 眼睛防護.激光和激光系統調節工作用護目鏡(激光調節護目鏡)
| Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
|
| BS EN 2266-005-2005
| 航空航天系列.通用電纜.操作溫度為-55 °C 到 200 °C .紫外激光可印刷.產品標準
| Cables, electrical, for general purpose — Operating temperatures between??-55 ℃ and 200 ℃ — Part 005: UV laser printable — Product standard
|
| BS EN 2266-007-2005
| 航空航天系列.通用電纜.操作溫度為-55 °C 到 200 °C .紫外激光可印刷多芯裝套電纜.產品標準
| Cables, electrical, for general purpose — Operating temperatures between –55 ℃ and 200 ℃ — Part 007: UV laser printable multicore jacketed cable — Product standard
|
| BS EN 2267-007-2005
| 航空系列.一般用途的電纜,電器.-55°C和260°C之間的操作溫度.DMA族、單個可打印紫外激光和多芯附件.產品標
| Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 007: DMA family, single ink-jet printable and multicore assembly — Product standard
|
| BS EN 2267-008-2005
| 航空系列.一般用途的電纜,電器.-55°C和260°C之間的操作溫度.DM族、單個可打印紫外激光和多芯附件.產品標
| Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 008: DM family, single UV laser printable and multicore assembly — Product standard
|
| BS EN 2267-009-2005
| 航空系列.一般用途的電纜,電器.-55℃和260℃之間的操作溫度.DRA族、單個可打印UV激光和多芯附件.產品標準
| Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 009: DRA family, single and multicore assembly — Product standard
|
| BS EN 2267-010-2005
| 航空系列.一般用途的電纜,電器.-55℃和260℃之間的操作溫度.DM族、單個可打印UV激光.產品標準
| Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 010: DR family, single UV laser printable — Product standard
|
| BS EN 2713-007-2005
| 航空航天系列.單芯和多芯電纜的一般用途.操作溫度在-55 °C 和200 °C之間.屏蔽式（螺旋式）和有護套的可印
| Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Screened (spiral) and jacketed, UV laser printable - Product standard
|
| BS EN 2714-007-2005
| 航空航天系列.單芯和多芯電纜的一般用途.操作溫度在-55 °C 和260 °C之間.屏蔽式（螺旋式）和有護套的可印
| Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 007: Screened (spiral) and jacketed, UV laser printable — Product standard
|
| BS EN 2714-011-2005
| 航空航天系列.單芯和多芯電纜的一般用途.操作溫度在-55 °C 和260 °C之間.DM族、屏蔽式（螺旋式）和有護套
| Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 011: DM family, screened (spiral) and jacketed, UV laser printable — Product standard
|
| BS EN 2714-012-2005
| 航空航天系列.單芯和多芯電纜的一般用途.操作溫度在-55 °C 和260 °C之間.DM族、屏蔽式（麻花型）和有護套
| Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 012: DM family, screened (braided) and jacketed, UV laser printable — Product standard
|
| BS EN 2714-013-2005
| 航空航天系列.單芯和多芯電纜的一般用途.操作溫度在-55 °C 和260 °C之間.DM族、屏蔽式（螺旋式）和有護套
| Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 013: DR family, screened (spiral) and jacketed, UV laser printable — Product standard
|
| BS EN 31253-1996
| 激光和相關設備.激光裝置.機械接口
| Lasers and laser-related equipment - Laser device - Mechanical interfaces
|
| BS EN 3475-706-2005
| 航空航天系列.飛行器用電纜.試驗方法.激光可標記性
| Cables, electrical, aircraft use — Test methods — Part 706: Laser markability
|
| BS EN 60601-2-22-1996
| 醫療電氣設備.安全專門要求.激光診斷和治療設備規范
| Medical electrical equipment - Particular requirements for safety - Specification for diagnostic and therapeutic laser equipment
|
| BS EN 60825-1-1994
| 激光產品的輻射安全性.第1部分:設備分類、要求和用戶指南
| Safety of laser products - Equipment classification, requirements and user's guide
|
| BS EN 60825-12-2004
| 激光產品的安全.用于信息傳輸?shù)淖杂煽臻g光通信系統的安全
| Safety of laser products - Safety of free space optical communication systems used for transmission of information
|
| BS EN 60825-2-2004
| 激光產品的安全.光纖通信系統的安全
| Safety of laser products - Safety of optical fibre communication systems (OFCS)
|
| BS EN 60825-4-1998
| 激光產品安全.激光防護裝置
| Safety of laser products - Laser guards
|
| BS EN 60856-1993
| 50HZ/625行預錄式光反射視盤錄像系統"激光視盤".PAL制規范
| Specification for pre-recorded optical reflective videodisk system "Laser vision" 50 Hz/625 lines - PAL
|
| BS EN 61040-1993
| 激光輻射功率和能量探測器、儀表和設備規范
| Specification for power and energy measuring detectors, instruments and equipment for laser radiation
|
| BS EN 61096-1993
| 數字激光唱機用放音設備特性測量方法
| Methods of measuring the characteristics of reproducing equipment for digital audio compact discs
|
| BS EN 61280-1-4-2003
| 光纖通信子系統基本試驗程序.一般通信子系統的試驗程序.多模纖維激光發射機用二維近場數據的采集和整理
| Fibre optic communication subsystem basic test procedures - Test procedures for general communication subsystems - Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters
|
| BS EN 61751-1998
| 激光電信模塊.可靠性評定
| Laser modules used for telecommunication - Reliability assessment
|
| BS EN 62107-2002
| 高級激光視盤.光盤互換系統.規范
| Super video compact disc - Disc-interchange system-specification
|
| BS EN 62148-11-2004
| 纖維光學有源元件及器件.包裝和接口標準.14針調制器集成激光二極管發射機
| Fibre optic active components and devices - Package and interface standards - 14-pin modulator-integrated laser diode transmitters
|
| BS EN 62148-12-2004
| 纖維光學有源元件和器件.包裝和接口標準.帶同軸RF連接器的激光發射機
| Fibre optic active components and devices - Package and interface standards - Laser transmitters with coaxial RF connector
|
| BS EN 62149-3-2004
| 纖維光學有源元件和器件.性能標準.2.5Gbit/s調制器-集成激光二極管發射機
| Fibre optic active components and devices - Performance standards - 2,5 Gbit/s modulator-integrated laser diode transmitters
|
| BS EN 821-2-1997
| 高技術陶瓷.整體陶瓷.熱物理特性. 激光閃爍法(或熱脈沖法)對熱擴散率的測定
| Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Determination of thermal diffusivity by the laser flash (or heat pulse) method
|
| BS EN ISO 11146-1-2005
| 激光和激光相關設備.激光束寬度、發散角和束擴散率的試驗方法.無象散和簡單象散束
| Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Stigmatic and simple astigmatic beams
|
| BS EN ISO 11146-2-2005
| 激光和激光相關設備.激光束寬度、發散角和束擴散率的試驗方法.一般象散束
| Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - General astigmatic beams
|
| BS EN ISO 11149-1997
| 光學和光學儀器.激光和激光相關裝置.非遠程通信激光用的光纖連接器
| Optics and optical instruments - Lasers and laser related equipment - Fibre optic connectors for non-telecommunication laser applications
|
| BS EN ISO 11151-1-2000
| 激光和激光相關設備.標準光學元件.紫外線、可見光和近紅外光譜范圍內的元件
| Lasers and laser-related equipment - Standard optical components - Components for the UV, visible and near-infrared spectral ranges
|
| BS EN ISO 11151-2-2000
| 激光和激光相關設備.標準光學元件.紅外光譜范圍內的元件
| Lasers and laser-related equipment - Standard optical components - Components for the infrared spectral range
|
| BS EN ISO 11252-2004
| 激光和激光相關設備.激光裝置.文獻工作的最低要求
| Lasers and laser-related equipment - Laser device - Minimum requirements for documentation
|
| BS EN ISO 11254-1-2000
| 激光和激光相關設備.光表面激光導致?lián)p傷閾的測定.1-on-1試驗
| Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - 1-on-1 test
|
| BS EN ISO 11254-2-2001
| 激光和激光相關設備.光表面激光導至損傷閾值的測定.S-on-1試驗
| Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - S-on-1 test
|
| BS EN ISO 11551-2004
| 光學和光學儀器.激光和激光設備
| Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components
|
| BS EN ISO 11553-1-2005
| 機械安全.激光加工機械.一般安全要求
| Safety of machinery - Laser processing machines - General safety requirements
|
| BS EN ISO 11670-2003
| 激光器和激光相關設備.激光束參數的試驗方法.束定位穩定性
| Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability
|
| BS EN ISO 11810-1-2005
| 激光和激光相關設備.手術布單和/或病人保護覆蓋物耐激光性的試驗方法和分類.基本點燃和穿透性
| Lasers and laser-related equipment - Test method and classification for laser resistance of surgical drapes and/or patient protective covers - Primary ignition and penetration
|
| BS EN ISO 11990-2003
| 光學和光學儀器.激光器和相關的激光設備.氣管柄抗激光性的測定
| Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts
|
| BS EN ISO 12005-2003
| 激光器和激光相關設備.激光束參數的試驗方法.偏振
| Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization
|
| BS EN ISO 13694-2001
| 光學和光學儀器.激光和激光設備.激光束能量密度分布的試驗方法
| Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution
|
| BS EN ISO 13695-2004
| 光學和光子學.激光和相關設備.激光的光譜特性的試驗方法
| Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers
|
| BS EN ISO 13919-1-1997
| 焊接.電子和激光束焊接接頭.缺陷的質量級別導則.鋼
| Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Steel
|
| BS EN ISO 13919-2-2001
| 焊接.電子和激光束焊接接頭.缺陷的質量分級指南.鋁及其可焊合金
| Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Aluminium and its weldable alloys
|
| BS EN ISO 15367-1-2003
| 激光和激光相關設備.測定激光束波陣面形狀的試驗方法.術語及基礎領域
| Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Terminology and fundamental aspects
|
| BS EN ISO 15609-4-2004
| 金屬材料焊接程序的規范和合格鑒定.焊接程序規范.激光束焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Laser beam welding
|
| BS EN ISO 15614-11-2002
| 金屬材料焊接程序的規范和合格鑒定.焊接程序試驗.電子和激光束焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Electron and laser beam welding
|
| BS EN ISO 15616-1-2003
| 高質量焊接和切割用CO2激光束機的驗收試驗.通用原則和驗收條件
| Acceptance tests for CO2- laser beam machines for high quality welding and cutting - General principles, acceptance conditions
|
| BS EN ISO 15616-2-2003
| 高質量焊接和切割用CO2激光束機的驗收試驗.靜態和動態精確度的測定
| Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Measurement of static and dynamic accuracy
|
| BS EN ISO 15616-3-2003
| 高質量焊接和切割用CO2激光束機的驗收試驗.氣體流量和壓力測量儀的校正
| Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Calibration of instruments for measurement of gas flow and pressure
|
| BS EN ISO 17526-2003
| 光學和光學儀器.激光器和激光相關設備.激光器的使用壽命
| Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers
|
| BS EN ISO 22827-1-2006
| Nd:YAG激光束焊接機器的驗收試驗.帶光纖送的機器.激光裝配
| Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Laser assembly
|
| BS EN ISO 22827-2-2006
| Nd:YAG激光束焊接機器的驗收試驗.帶光纖傳送的機器.移動機理
| Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Moving mechanism
|
| BS IEC 60825-8-2000
| 激光產品的安全.醫療激光設備安全使用指南
| Safety of laser products - Guidelines for the safe use of medical laser equipment
|
| BS ISO 10110-13-1998
| 光學和光學儀器.光學元件和系統圖紙的制備.第13部分:激光輻射損壞閾值
| Optics and optical instruments - Preparation of drawings for optical elements and systems - Laser irradiation damage threshold
|
| BS ISO 10110-17-2004
| 光學和光學儀器.光學元件和系統制圖準備.激光輻射損害閾
| Optics and optical instruments - Preparation of drawings for optical elements and systems - Laser irradiation damage threshold
|
| BS ISO 13320-1-2000
| 粒度分析.激光衍射方法.一般規則
| Particle size analysis - Laser diffraction methods - General principles
|
| BS ISO 14408-1998
| 激光外科用氣管管子的設計.標記和附加信息要求
| Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information
|
| BS ISO 16063-11-2001
| 振動和沖擊傳感器的校準方法.采用激光干涉量度法的主要振動校準
| Methods for the calibration of vibration and shock transducers - Primary vibration calibration by laser interferometry
|
| BS ISO 16063-13-2002
| 振動和沖擊傳感器的校準方法.采用激光干涉測量法的主要沖擊校準
| Methods for the calibration of vibration and shock transducers - Primary shock calibration using laser interferometry
|
| BS ISO 22826-2006
| 金屬材料焊縫的破壞性試驗.激光和電子束焊測定窄接頭硬度的試驗(維氏和努氏硬度試驗)
| Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
|
| BS ISO TR 11552-1998
| 激光和與激光相關的設備.激光材料-加工機械.金屬切削的性能規范和基準點
| Lasers and laser-related equipment - Laser materials-processing machines - Performance specifications and benchmarks for cutting of metals
|
| BS ISO TR 11991-1997
| 上導氣管激光外科手術時導氣管的管理指南
| Guidance on airway management during laser surgery of upper airway
|
| BS QC 720102-1997
| 光纖系統和子系統用帶引線的激光二極管模數的空白詳細規范
| Blank detail specification for laser diode modules with pigtail for fibre optic systems and subsystems
|
| 編號 | 中文名稱 | 英文名稱 |
|---|