| 編號 | 中文名稱 | 英文名稱 |
|---|
| GB 10320-1995
| 激光設備和設施的電氣安全
| Electrical safety of laser equipment and installations
|
| GB 10435-1989
| 作業場所激光輻射衛生標準
| Hygienic standard for laser radiation in the work environment
|
| GB 11748-2005
| 二氧化碳激光治療機
| Carbon dioxde Laser Treating Intrument
|
| GB 12257-2000
| 氦氖激光治療機通用技術條件
| General specification of He-Ne laser medical equipment
|
| GB 18151-2000
| 激光防護屏
| Laser guards
|
| GB 18217-2000
| 激光安全標志
| Laser safety signs
|
| GB 18490-2001
| 激光加工機械安全要求
| Laser processing machines--Safety requirements
|
| GB 7247.1-2001
| 激光產品的安全第1部分:設備分類、要求和用戶指南
| Safety of laser products--Part 1:Equipment classification，requirements and user’s guide
|
| GB 9706.20-2000
| 醫用電氣設備第2部分:診斷和治療激光設備安全專用要求
| Medical electrical equipment--Part 2:Particular requirements for the safety of diagnostic andtherapeutic laser equipment
|
| GB/T 11153-1989
| 激光小功率計性能檢測方法
| Parameters testing method of laser power meter in low range
|
| GB/T 11293-1989
| 固體激光材料名詞術語
| Terms and definitions of solid-state laser materials
|
| GB/T 11295-1989
| 激光晶體棒型號命名方法
| Designation for laser crystal rods
|
| GB/T 11297.1-2002
| 激光棒波前畸變的測量方法
| Test method for wavefront distortion of laserrods
|
| GB/T 11297.2-1989
| 激光棒側向散射系數的測量方法
| Test method for side direction scatteringcoefficient of laser rods
|
| GB/T 11297.3-2002
| 摻釹釔鋁石榴石激光棒消光比的測量方法
| Test method for extinction ratio of Nd∶YAG laser rods
|
| GB/T 11297.4-1989
| 摻釹釔鋁石榴石激光棒長脈沖激光閾值及斜率效率的測量方法
| Test method fornormal pulse lasing threshold and slope efficiency of Nd:YAG laser rods
|
| GB/T 11297.5-1989
| 摻釹釔鋁石榴石激光棒連續激光閾值、斜率效率和輸出功率的測量方法
| Test method for continuous lasing threshold， slope efficiency and output power of Nd∶YAG laser rods
|
| GB/T 12082-1989
| 氣體激光器文字符號
| Letter symbols for gas lasers
|
| GB/T 12083-1989
| 氣體激光器電源系列
| Power supply series for gas lasers
|
| GB/T 12377-1990
| 空氣中微量鈾的分析方法激光熒光法
| Analytical method of microquantity uranium in air by laser-fluoremetry
|
| GB/T 13739-1992
| 激光輻射橫模鑒別方法
| Testing method of transverse mode of laser radiation
|
| GB/T 13740-1992
| 激光輻射發散角測試方法
| Testing method of divergence angle of laser radiation
|
| GB/T 13741-1992
| 激光輻射光束直徑測試方法
| Testing method of beam diameter of laser radiation
|
| GB/T 13842-1992
| 摻釹釔鋁石榴石激光棒
| Neodymium-doped yttrium aluminium garnet laser rods
|
| GB/T 13863-1992
| 激光輻射功率測試方法
| Testing method for laser radiant power
|
| GB/T 13864-1992
| 激光輻射功率穩定度測試方法
| Testing method for laser radiant power stability
|
| GB/T 14078-1993
| 氦氖激光器技術條件
| He-Ne laser specification
|
| GB/T 14128-1993
| 摻銣釔鋁石榴石激光棒尺寸系列
| Dimension series for neodymium-doped yttrium aluminium garnet laser rods
|
| GB/T 15175-1994
| 固體激光器主要參數測試方法
| Measurement methods for main parameter of solid-state lasers
|
| GB/T 15301-1994
| 氣體激光器總規范
| General specification for gas lasers
|
| GB/T 15313-1994
| 激光術語
| Terminology for laser
|
| GB/T 15490-1995
| 固體激光器總規范
| General specification for solid state lasers
|
| GB/T 15649-1995
| 半導體激光二極管空白詳細規范
| Blank detail specification for semiconductor laser diodes
|
| GB/T 15860-1995
| 激光唱機通用技術條件
| General specification for compact disc players
|
| GB/T 16601-1996
| 光學表面激光損傷閾值測試方法第1部分:1對1測試
| Test methods for laser induced damage threshold of optical surfaces--Part 1: 1 on 1 test
|
| GB/T 17540-1998
| 臺式激光打印機通用規范
| General specification for desktop laser printer
|
| GB/T 17736-1999
| 激光防護鏡主要參數測試方法
| Testing method of main parameters for laserprotective eyewear
|
| GB/T 18683-2002
| 鋼鐵件激光表面淬火
| Laser surface hardening of iron and steel parts
|
| GB/T 18904.2-2002
| 半導體器件第12-2部分:光電子器件纖維光學系統或子系統用帶尾纖的激光二極管模塊空白詳細規范
| Semiconductor devices--Part 12-2:Optoelectronic devices--Blank detail specification for laser diodes modules with pigtail for fiber optic systems or sub-systems
|
| GB/T 19077.1-2003
| 粒度分析激光衍射法
| Particle size analysis--Laser diffraction method
|
| GB/T 20485.11-2006
| 振動與沖擊傳感器校準方法第11部分：激光干涉法振動絕對校準
| Methods for the calibration of vibration and shock transducers - Part 11: Primary vibration calibration by laser interferometry
|
| GB/T 20485.13-2007
| 振動與沖擊傳感器校準方法 第13部分: 激光干涉法沖擊絕對校準
| ()
|
| GB/T 20722-2006
| 激光加工機器人 通用技術條件
| General specifications of laser processing robots
|
| GB/T 21199-2007
| 激光打印機干式單組份顯影劑
| ()
|
| GB/T 21200-2007
| 激光打印機干式雙組份顯影劑用色調劑
| ()
|
| GB/T 21201-2007
| 激光打印機干式雙組份顯影劑
| ()
|
| GB/T 4799-2001
| 激光器型號命名方法
| The type designation for laseres
|
| GB/T 6360-1995
| 激光功率能量測試儀器規范
| Specification for laser radiation power and energy measuring equipment
|
| GB/T 6598-1986
| 小角激光光散射法測定聚苯乙烯標準樣品的重均分子量
| Determination of weight-average molecular weight of polystyrene standards by low angle laser light scattering method
|
| GB/T 7257-1987
| 氦氖激光器參數測試方法
| Measurement methods of parameter for helium neon laser
|
| GB/Z 18461-2001
| 激光產品的安全生產者關于激光輻射安全的檢查清單
| Safety of laser products--Manufacturer’s checklist for radiation safety of laser products
|
| GB/Z 18462-2001
| 激光加工機械金屬切割的性能規范與標準檢查程序
| Laser processing machines--Performance specifications and benchmarks for cutting of metals
|
| HG/T 2172-2003
| 紅激光影像記錄片
| ()
|
| JB/T 10334-2002
| 激光打印機測試版（A4）
| ()
|
| JB/T 10406-2004
| 內燃機 激光淬火氣缸套 技術條件
| ()
|
| JB/T 10454-2004
| 激光打印機負電性有機光導鼓 技術條件
| ()
|
| JB/T 10625-2006
| 激光選區燒結快速成形機床 技術條件
| Selective laser sintering prototyping machines-Technical requirements
|
| JB/T 10626-2006
| 立體光固化激光快速成形機床 技術條件
| Stereolifhography laser prototyping machines-Technical requirements
|
| JB/T 10741-2007
| 激光打印機充電輥 技術條件
| Specification of the primary charging roller for laser printer
|
| JB/T 10785-2007
| 大功率橫流連續波二氧化碳激光器
| The high power transverse flow continuous wave CO2 lasers
|
| JB/T 5524-1991
| 實驗室激光 安全規則
| ()
|
| JB/T 5610-2006
| 激光干涉儀
| Laser interferometer
|
| JB/T 5748-1991
| 紅寶石激光器 主要參數測試方法
| ()
|
| JB/T 5749-1991
| 釹玻璃激光器 主要參數測試方法
| ()
|
| JB/T 6249-1992
| 氦鎘激光器 主要參數測試方法
| ()
|
| JB/T 6250.1-1992
| YAG 連續激光器 主要參數測試方法
| ()
|
| JB/T 6250.2-1992
| YAG 脈沖激光器 主要參數測試方法
| ()
|
| JB/T 6859-1993
| 氣體激光器 主要參數
| ()
|
| JB/T 6860-1993
| 測量激光輻射功率能量的探測器、儀器與設備
| ()
|
| JB/T 7795-1995
| 激光器和與激光有關的設備 機械接口
| ()
|
| JB/T 9317-1999
| 激光指向儀
| ()
|
| JB/T 9326-1999
| 激光喇曼分光光度計
| ()
|
| JB/T 9489-1999
| 氬離子激光器 主要參數 測試方法
| ()
|
| JB/T 9490-1999
| 二氧化碳激光器 主要參數 測試方法
| ()
|
| JB/T 9491-1999
| 氦氖激光器 主要參數 測試方法
| ()
|
| JB/T 9492-1999
| 釔鋁石榴石激光器 參數系列
| ()
|
| JC/T 721-2006
| 水泥顆粒級配測定方法 激光法
| ()
|
| MT 870-2000(2005)
| 煤礦用防爆激光指向儀
| ()
|
| QB/T 1730-1993
| 氦氖激光傳真膠片
| ()
|
| SH/T 1612.8-2005
| 工業用精對苯二甲酸粒度分布的測定——激光衍射法
| ()
|
| SY/T 6131-1995
| 碎屑巖粒度的測定 激光法
| ()
|
| YS/T 617.7-2007
| 鋁、鎂及其合金粉理化性能測定方法 第7部分 粒度分布的測定 激光散射/衍射法
| Determination of chemical compositions and physical properties of aluminum powder,magnesium powder and Al-Mg alloy powder Part 7 Determination of particle size distribution Laser scatterance/diffraction method
|
| 編號 | 中文名稱 | 英文名稱 |
|---|