| 編號 | 中文名稱 | 英文名稱 |
|---|
| IEC 60601-2-22-1995
| 醫用電氣設備 第2-22部分:診斷和治療用激光設備安全的特殊要求
| Medical electrical equipment - Part 2: Particular requirements for the safety of diagnostic and therapeutic laser equipment
|
| IEC 60747-5-4-2006
| 半導體器件.分立器件.第5-4部分:光電器件.半導體激光器
| Semiconductor devices - Discrete devices - Part 5-4: Optoelectronic devices - Semiconductor lasers
|
| IEC 60825-1 AMD 1-1997
| 激光產品的安全 第1部分:設備分類、要求和用戶指南 修改1
| Safety of laser products - Part 1: Equipment classification, requirements and user's guide; Amendment 1
|
| IEC 60825-1 AMD 2 Corrigendum 1-2002
| 激光產品的安全.第1部分:設備分類、要求和用戶指南.修改件2
| Safety of laser products - Part 1: Equipment classification, requirements and user's guide; Amendment 2
|
| IEC 60825-1 AMD 2-2001
| 激光產品的安全 第1部分:設備分類、要求和用戶指南 修改2
| Safety of laser products - Part 1: Equipment classification, requirements and user's guide; Amendment 2
|
| IEC 60825-1 Edition 1.2-2001
| 激光產品的安全.第1部分:設備分類、要求和用戶指南
| Safety of laser products - Part 1: Equipment classification, requirements and user's guide
|
| IEC 60825-1-1993
| 激光產品的安全 第1部分:設備分類、要求和用戶指南
| Safety of laser products; part 1: equipment classification, requirements and user's guide
|
| IEC 60825-12-2005
| 激光產品的安全.第12部分:用于信息傳輸?shù)淖杂煽臻g光通信系統的安全
| Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information
|
| IEC 60825-2-2005
| 激光產品的安全.第2部分:光纖通信系統的安全(OFCS)
| Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)
|
| IEC 60825-4-2006
| 激光產品的安全.第4部分:激光防護器
| Safety of laser products - Part 4: Laser guards
|
| IEC 60856 AMD 1-1991
| 預錄光學反射視盤系統 “激光視盤” 50Hz/625行 PAL制 修改1
| Pre-recorded optical reflective videodisk system; "laser vision" 50 Hz/625 lines; PAL; amendment 1
|
| IEC 60856 AMD 2-1997
| 預錄光學反射視盤系統 “激光視盤” 50Hz/625行 PAL制 修改2
| Pre-recorded optical reflective videodisk system "Laser vision" 50 Hz/625 lines - PAL; Amendment 2
|
| IEC 60856-1986
| 預錄光學反射視盤系統 “激光視盤” 50Hz/625行 PAL制
| Pre-recorded optical reflective videodisk system. "Laser vision" 50 Hz/625 lines - PAL
|
| IEC 60857 AMD 1-1991
| 預錄光學反射視盤系統 “激光視盤” 60Hz/525行 M/NTSC制 修改1
| Pre-recorded optical reflective videodisk system; "laser vision" 60 Hz/525 lines; M/NTSC; amendment 1
|
| IEC 60857 AMD 2-1997
| 預錄光學反射視盤系統 “激光視盤” 60Hz/525行 M/NTSC制 修改2
| Pre-recorded optical reflective videodisk system - "Laser vision" 60 Hz/525 lines - M/NTSC; Amendment 2
|
| IEC 60857-1986
| 預錄光學反射視盤系統 “激光視盤” 60Hz/525行 M/NTSC制
| Pre-recorded optical reflective videodisk system. "Laser vision" 60 Hz/525 lines - M/NTSC
|
| IEC 61040-1990
| 激光輻射用功率和能量測量探測器、儀器和設備
| Power and energy measuring detectors, instruments and equipment for laser radiation
|
| IEC 61096 AMD 1-1996
| 數字音頻激光唱盤重放設備特性的測量方法 修改1
| Methods of measuring the characteristics of reproducing equipment for digital audio compact discs; Amendment 1
|
| IEC 61096-1992
| 數字音頻激光唱盤重放設備特性的測量方法
| Methods of measuring the characteristics of reproducing equipment for digital audio compact discs
|
| IEC 61280-1-4-2003
| 纖維光學通信子系統試驗程序.第1-4部分:一般通信子系統.多模纖維激光發射機用二維近場數據的采集和換算
| Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems; Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters
|
| IEC 61280-2-10-2005
| 纖維光學通信子系統試驗程序.第2-10部分:數字系統.激光發射器的時間分辨線性調頻脈沖和α指數測量
| Fibre optic communication subsystem test procedures - Part 2-10: Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters
|
| IEC 61751-1998
| 通信用激光模塊 可靠性評定
| Laser modules used for telecommunication - Reliability assessment
|
| IEC 62107-2000
| 高級激光視盤 光盤交換系統 規范
| Super Video Compact Disc - Disc-interchange system-specification
|
| IEC 62148-11-2003
| 光纖有源元件及器件.包裝和接口標準.第11部分:14針調制器集成激光二極管發射機
| Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator-integrated laser diode transmitters
|
| IEC 62148-12-2004
| 纖維光學有源元件和器件.包裝和接口標準.第12部分:帶同軸RF連接器的激光傳輸器
| Fibre optic active components and devices - Package and interface standards - Part 12: Laser transmitters with a coaxial RF connector
|
| IEC 62149-3-2004
| 纖維光學有源元件和器件.性能標準.第3部分:2.5Gbit/s調制器-集成激光二極管發射機
| Fibre optic active components and devices - Performance standards - Part 3: 2,5 Gbit/s modulator-integrated laser diode transmitters
|
| IEC/TR 60825-10-2002
| 激光制品的安全性.第10部分:IEC 60825-1的應用導則和注釋
| Safety of laser products - Part 10: Application guidelines and explanatory notes to IEC 60825-1
|
| IEC/TR 60825-13-2006
| 激光產品的安全.第13部分:激光產品分類測量
| Safety of laser products - Part 13: Measurements for classification of laser products
|
| IEC/TR 60825-14-2004
| 激光產品安全.第14部分:使用者指南
| Safety of laser products - Part 14: A user's guide
|
| IEC/TR 60825-5-2005
| 激光產品安全性.第5部分:IEC 60825-1的制造商檢查清單
| Safety of laser products - Part 5: Manufacturer's checklist for IEC 60825-1
|
| IEC/TR 60825-8-1999
| 激光產品的安全 第8部分:醫療激光設備安全使用指南
| Safety of laser products - Part 8: Guidelines for the safe use of medical laser equipment
|
| IEC/TR 60825-9-1999
| 激光產品的安全 第9部分:非相干光輻射最大允許曝光量的匯集
| Safety of laser products - Part 9: Compilation of maximum permissible exposure to incoherent optical radiation
|
| IEC/TR3 60825-3-1995
| 激光產品的安全 第3部分:激光顯示器和指示器指南
| Safety of laser products - Part 3: Guidance for laser displays and shows
|
| ISO 10110-17-2004
| 光學和光學儀器.光學元件和系統制圖準備.第17部分:激光輻射損害閾
| Optics and photonics - Preparation of drawings for optical elements and systems - Part 17: Laser irradiation damage threshold
|
| ISO 11145-2006
| 光學和光子學.激光和激光設備.詞匯和符號
| Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols
|
| ISO 11146-1-2005
| 激光和激光相關設備.激光束寬度、發散角和束擴散率的試驗方法.第1部分:無象散和簡單象散束
| Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams
|
| ISO 11146-2-2005
| 激光和激光相關設備.激光束寬度、發散角和束擴散率的試驗方法.第2部分:一般像散束
| Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams
|
| ISO 11151-1-2000
| 激光和激光設備 標準光學元件 第1部分:紫外線、可見和近紅外光譜范圍用元件
| Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
|
| ISO 11151-2-2000
| 激光和激光設備 標準光學元件 第2部分:紅外光譜范圍用元件
| Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range
|
| ISO 11252-2004
| 激光和激光設備.激光裝置.對文件的最低要求
| Lasers and laser-related equipment - Laser device - Minimum requirements for documentation
|
| ISO 11254-1-2000
| 激光和激光設備 光學表面激光導致?lián)p傷閾值的測定 第1部分:1-on-1試驗
| Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1-on-1 test
|
| ISO 11254-2-2001
| 激光器和激光相關設備 激光導致光學表面損傷閾值的確定 第2部分：S-on-1 試驗
| Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S-on-1 test
|
| ISO 11551-2003
| 光學和光學儀器.激光和激光設備.光學激光組件光吸收性試驗方法
| Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components
|
| ISO 11553-1-2005
| 機械安全.激光加工機械.第1部分:一般安全要求
| Safety of machinery - Laser processing machines - Part 1: General safety requirements
|
| ISO 11554-2006
| 光學和光子學.激光和激光設備.激光束功率、能量和時間特征的試驗方法
| Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics
|
| ISO 11670 Technical Corrigendum 1-2004
| 激光和激光相關設備.激光束參數的試驗方法.束位置穩定性.技術勘誤1
| Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability; Technical Corrigendum 1
|
| ISO 11670-2003
| 激光和激光設備.激光束參數的試驗方法.束定位穩定性
| Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability
|
| ISO 11810-1-2005
| 激光和激光相關設備.手術布單和/或病人保護覆蓋物耐激光性的試驗方法和分類.第1部分:基本點燃和穿透性
| Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Part 1: Primary ignition and penetration
|
| ISO 11990-2003
| 光學和光學儀器.激光和激光設備.氣管柄激光抗性的測定
| Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts
|
| ISO 12005-2003
| 激光和激光設備.激光束參數的試驗方法.偏振
| Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization
|
| ISO 13320-1-1999
| 粒度分析 激光衍射法 第1部分:一般原則
| Particle size analysis - Laser diffraction methods - Part 1: General principles
|
| ISO 13694 Technical Corrigendum 1-2005
| 光學和光學儀器.激光和激光設備.激光束能量密度分布的試驗方法.技術勘誤1
| Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution; Technical Corrigendum 1
|
| ISO 13694-2000
| 光學和光學儀器 激光和激光設備 激光束能量密度分布的試驗方法
| Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power [energy] density distribution
|
| ISO 13695-2004
| 光學和光子學.激光及其相關設備.激光光譜特性的試驗方法
| Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers
|
| ISO 13697-2006
| 光學和光子學.激光和激光相關的設備.光學激光元件的鏡面反射率和正透視度的試驗方法
| Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components
|
| ISO 13919-1-1996
| 焊接 電子束和激光焊接頭 缺陷的質量分級指南 第1部分:鋼
| Welding - Electron and laser-beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel
|
| ISO 13919-2-2001
| 焊接 電子束和激光束焊接接頭 缺陷質量等級指南 第2部分：鋁及其可焊合金
| Welding - Electron and laser beam welded joints; Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys
|
| ISO 14408-2005
| 激光手術用氣管掐管.標識及附帶信息要求
| Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information
|
| ISO 15367-1-2003
| 激光及激光相關設備.激光束波前形狀測定用試驗方法.第1部分:術語和基礎領域
| Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects
|
| ISO 15367-2-2005
| 激光及激光相關設備.激光束波前形狀測定用試驗方法.第2部分:Shack-Hartmann傳感器
| Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 2: Shack-Hartmann sensors
|
| ISO 15609-4-2004
| 金屬材料的焊接程序規范和鑒定.焊接程序規范.第4部分:激光束焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding
|
| ISO 15614-11-2002
| 金屬材料焊接程序的規范和鑒定.焊接程序試驗.第11部分:電子和激光束焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding
|
| ISO 15616-1-2003
| 高質量焊接和切割用CO2激光射線機的驗收試驗.第1部分:通用原理和驗收條件
| Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions
|
| ISO 15616-2-2003
| 高質量焊接和切割用CO2激光射線機的驗收試驗.第2部分:靜態和動態準確度的測定
| Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy
|
| ISO 15616-3-2003
| 高質量焊接和切割用CO2激光射線機的驗收試驗.第3部分:氣體流量和壓力測量?jī)x的校正
| Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure
|
| ISO 16063-11-1999
| 振動與沖擊傳感器的校準方法 第11部分:激光干涉法作主要的振動校準
| Methods for the calibration of vibration and shock transducers - Part 11: Primary vibration calibration by laser interferometry
|
| ISO 16063-13-2001
| 振動和沖擊傳感器的校準方法 第13部分：用激光干涉法的基本校準
| Methods for the calibration of vibration and shock transducers - Part 13: Primary shock calibration using laser interferometry
|
| ISO 17123-6-2003
| 光學和光學儀器.大地測量和測繪儀器的現場試驗規程.第6部分:旋轉激光器
| Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 6: Rotating lasers
|
| ISO 17526-2003
| 光學和光學儀器.激光器和激光相關設備.激光器的使用壽命
| Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers
|
| ISO 17658-2002
| 焊接.氧氣火焰切割、激光束切割和等離子體切割的缺陷
| Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology
|
| ISO 18755-2005
| 細陶瓷(高級陶瓷、高級工業陶瓷).用激光閃光法測定塊體陶瓷的熱擴散
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thermal diffusivity of monolithic ceramics by laser flash method
|
| ISO 22826-2005
| 金屬材料焊縫的破壞性試驗.激光和電子束焊接窄接頭的硬度試驗(維氏和努氏硬度試驗)
| Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
|
| ISO 22827-1-2005
| Nd:YAG激光射線焊接機器的加速試驗.帶光纖傳送的機器.第1部分:激光裝配
| Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 1: Laser assembly
|
| ISO 22827-2-2005
| Nd:YAG激光射線焊接機器的加速試驗.帶光纖傳送的機器.第2部分:移動裝置
| Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 2: Moving mechanism
|
| ISO 2971-1998
| 卷煙和過濾嘴 公稱直徑的測定 使用激光束測量?jī)x的方法
| Cigarettes and filter rods - Determination of nominal diameter - Method using a laser beam measuring apparatus
|
| ISO 6161-1981
| 個人用護目鏡 防激光輻射的濾光鏡和護目鏡
| Personal eye-protectors; Filters and eye-protectors against laser radiation
|
| ISO 8130-13-2001
| 粉末涂料 第13部分：采用激光衍射的粒度分析
| Coating powders - Part 13: Particle size analysis by laser diffraction
|
| ISO/TR 11146-3 Technical Corrigendum 1-2005
| 激光和激光相關設備.激光束寬度、發散角度和束擴散率的試驗方法.第3部分:本征的和幾何的激光束分類、擴散和
| Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods; Technical Corrigendum 1
|
| ISO/TR 11146-3-2004
| 激光和激光相關設備.激光束寬度、發散角度和束擴散率.第3部分:內在和幾何激光束分類、擴散和試驗方法細節
| Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods
|
| ISO/TR 11552-1997
| 激光和激光設備 激光材料處理機械 性能規范和金屬材料切削基準
| Lasers and laser-related equipment - Laser materials-processing machines - Performance specifications and benchmarks for cutting of metals
|
| ISO/TR 11991-1995
| 上呼吸道激光手術中通氣管理指南
| Guidance on airway management during laser surgery of upper airway
|
| ISO/TR 17671-6-2005
| 焊接.金屬材料焊接建議.第6部分:激光束焊接
| Welding - Recommendations for welding of metallic materials - Part 6: Laser beam welding
|
| ISO/TR 22588-2005
| 光學和光子學.激光和激光相關設備.激光光學元件感應吸收效應的測量和評估
| Optics and photonics - Lasers and laser-related equipment - Measurement and evaluation of absorption-induced effects in laser optical components
|
| ISO/TS 17477-2003
| 使用2維移動光學型激光器的焊接和切割用CO2激光束機器的驗收試驗
| Acceptance tests for CO<(Index)2>-laser beam machines for welding and cutting using 2D moving optics type
|
| 編號 | 中文名稱 | 英文名稱 |
|---|