| 編號 | 中文名稱 | 英文名稱 |
|---|
| ANSI/ASTM A833-1996
| 用比較硬度測試儀測量金屬材料壓痕硬度的慣例
| Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
|
| ANSI/ASTM B70-1990
| 電加熱金屬材料電阻隨溫度變化的測試方法
| Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating
|
| ANSI/ASTM E10-2001
| 金屬材料布氏硬度測試方法
| Test Method for Brinell Hardness of Metallic Materials
|
| ANSI/ASTM E103-1984
| 金屬材料壓痕硬度快速測試方法
| Method for Rapid Indentation Hardness Testing of Metallic Materials
|
| ANSI/ASTM E110-1982
| 手提式硬度計測定金屬材料的壓痕硬度的方法
| Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
|
| ANSI/ASTM E139-2000
| 金屬材料的傳導蠕變、蠕變裂紋和應力裂紋測試方法
| Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
|
| ANSI/ASTM E18-2007
| 金屬材料的洛氏硬度和洛氏表面硬度用試驗方法
| Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
|
| ANSI/ASTM E1842-1996
| 金屬材料微觀洛氏硬度測試方法
| Test Method for Macro-Rockwell Hardness Testing of Metallic Materials
|
| ANSI/ASTM E209-2000
| 以公稱或快速加熱速率和應變速率在高溫下進行金屬材料壓縮試驗慣例
| Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
|
| ANSI/ASTM E21-1992
| 金屬材料高溫拉力試驗方法
| Test Methods for Elevated Temperature Tension Tests of Metallic Materials
|
| ANSI/ASTM E238-1984
| 金屬材料銷型軸承試驗方法
| Test Method for Pin-Type Bearing Test of Metallic Materials
|
| ANSI/ASTM E23a-2007
| 金屬材料的切口棒材撞擊測試用試驗方法
| Test Methods for Notched Bar Impact Testing of Metallic Materials
|
| ANSI/ASTM E448-1982
| 金屬材料回挑硬度測試慣例
| Practice for Scleroscope Hardness Testing of Metallic Materials
|
| ANSI/ASTM E604-1983
| 金屬材料動態撕裂試驗方法
| Test Method for Dynamic Tear Testing of Metallic Materials
|
| ANSI/ASTM E9-1989
| 金屬材料室溫耐壓試驗方法
| Test Methods of Compression Testing of Metallic Materials at Room Temperature
|
| ANSI/ASTM E92-1982
| 金屬材料維氏硬度測試方法
| Test Method for Vickers Hardness of Metallic Materials
|
| ANSI/NACE MR0175-2003
| 油田設備用的硫化耐應力斷裂的金屬材料
| Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment
|
| ANSI/NEMA OS2-2003
| 非金屬材料制出線箱、器件箱、箱蓋和箱支架
| Nonmetallic Outlet Boxes, Device Boxes, Covers and Box Supports
|
| ASME BPVC Section 2 Part B-200
| ASME鍋爐和壓力容器規程.第2節:材料.第B部分:有色金屬材料規范
| (ASME Boiler & Pressure Vessel Code - Section 2: Materials; Part B: Nonferrous Material Specifications)
|
| ASTM A 833-1984
| 用比較硬度測試儀測量金屬材料的壓痕硬性
| Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
|
| ASTM B 70-1990
| 電加熱用金屬材料的電阻隨溫度而變化的試驗方法
| Standard Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating
|
| ASTM C 904-1998
| 耐化學腐蝕的非金屬材料標準術語
| Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials
|
| ASTM D 6412/D 6412M-1999
| 用于粘結金屬和非金屬材料的環氧(柔性)粘結劑的標準規范
| Standard Specification for Epoxy (Flexible) Adhesive for Bonding Metallic and Nonmetallic Materials
|
| ASTM E 103-1984
| 金屬材料快速壓痕硬度測試的標準試驗方法
| Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials
|
| ASTM E 10a-2007
| 金屬材料的布氏硬度用標準試驗方法
| Standard Test Method for Brinell Hardness of Metallic Materials
|
| ASTM E 110-1982
| 用輕型硬度測試儀測定金屬材料壓痕硬度的試驗方法
| Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
|
| ASTM E 1304-1997
| 金屬材料平面變形(V型槽口)斷裂韌度的測試方法(代替SAE ARP 1704)
| Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
|
| ASTM E 139-2006
| 金屬材料蠕度、蠕變斷裂和應力斷裂試驗的標準試驗方法
| Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
|
| ASTM E 1681-2003
| 測定金屬材料環境致裂的界限應力強度因子的標準試驗方法
| Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
|
| ASTM E 18-2007
| 金屬材料的洛氏硬度測量用標準試驗方法
| Standard Test Methods for Rockwell Hardness of Metallic Materials |
| ASTM E 209-2000
| 常規或快速加熱及應變升溫時金屬材料壓縮試驗的標準實施規程
| Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
|
| ASTM E 2097-2000
| 測定非金屬材料萃取物對生物技術產品安全性影響的標準指南
| Standard Guide for Determining the Impact of Extractables from Non-Metallic Materials on the Safety of Biotechnology Products
|
| ASTM E 21-2005
| 金屬材料高溫抗拉試驗的標準試驗方法
| Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
|
| ASTM E 238-1984
| 金屬材料的針型承載試驗方法
| Standard Test Method for Pin-Type Bearing Test of Metallic Materials
|
| ASTM E 23a-2007
| 金屬材料切口試棒沖擊測試的標準試驗方法
| Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
|
| ASTM E 399-2006
| 金屬材料的線性彈性平面變形斷裂韌度KIc用標準試驗方法
| Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials
|
| ASTM E 448-1982
| 金屬材料的回跳硬度試驗
| Standard Practice for Scleroscope Hardness Testing of Metallic Materials
|
| ASTM E 466-1996
| 金屬材料上進行的恒定振幅軸向疲勞試驗
| Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
|
| ASTM E 468-1990
| 金屬材料等幅疲勞試驗結果表述的標準實施規程
| Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
|
| ASTM E 604-1983
| 金屬材料的動態斷裂試驗方法
| Standard Test Method for Dynamic Tear Testing of Metallic Materials
|
| ASTM E 8-2004
| 金屬材料拉伸試驗的標準試驗方法
| Standard Test Methods for Tension Testing of Metallic Materials
|
| ASTM E 8M-2004
| 金屬材料拉伸試驗的標準試驗方法(米制)
| Standard Test Methods for Tension Testing of Metallic Materials [Metric]
|
| ASTM E 92-1982
| 金屬材料維氏硬度的測試方法
| Standard Test Method for Vickers Hardness of Metallic Materials
|
| ASTM E 9a-1989
| 室溫下金屬材料壓縮試驗的標準試驗方法
| Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
|
| ASTM F 1459-2006
| 測定金屬材料對氣體氫脆化(HGE)靈敏度的方法
| Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)
|
| ASTM G 113-2006
| 與非金屬材料自然和人工風化試驗相關的標準術語
| Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
|
| ASTM G 124-1995
| 在富氧環境中金屬材料燃燒特性的測定標準試驗方法
| Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres
|
| ASTM G 141-2003
| 非金屬材料曝光測試中變異度表達的標準導則
| Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials
|
| ASTM G 147-2002
| 自然與人工氣候試驗用非金屬材料的狀態調節和處理的標準規程
| Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
|
| ASTM G 151-2006
| 用實驗室光源的加速試驗裝置中曝光非金屬材料的標準實施規程
| Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
|
| ASTM G 152-2006
| 非金屬材料曝光用明焰碳弧光儀器操作的標準實施規范
| Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
|
| ASTM G 153-2004
| 非金屬材料曝光用封閉式碳弧光儀器操作的標準規程
| Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
|
| ASTM G 154-2006
| 非金屬材料紫外線曝光用熒光儀器操作的標準實施規范
| Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
|
| ASTM G 155a-2005
| 非金屬材料曝光用氙弧光儀操作的標準規程
| Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
|
| ASTM G 160-2003
| 用實驗室土壤埋入法評價非金屬材料微生物敏感性的標準操作規程
| Standard Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials by Laboratory Soil Burial
|
| ASTM G 63-1999
| 供氧設備用非金屬材料的評定的標準指南
| Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service
|
| ASTM G 7-2005
| 非金屬材料的大氣環境曝露試驗的標準規程
| Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials
|
| ASTM G 90-2005
| 用集中自然陽光光線法加速實施對非金屬材料的室外風蝕的標準實施規程
| Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight
|
| 編號 | 中文名稱 | 英文名稱 |
|---|