| 編號 | 中文名稱 | 英文名稱 |
|---|
| BS 4A 4-1.2-1967
| 金屬材料試樣和試驗方法規范.第1部分:拉伸試驗.第2節:高溫拉伸試驗.米制單位
| Specification for test pieces and test methods for metallic materials - Tensile tests - Tensile tests - elevated temperature - Metric units
|
| BS 4A 4-1.3-1967
| 金屬材料試樣和試驗方法規范.第1部分:拉伸試驗.第3節:不間斷蠕變試驗和蠕變斷裂試驗.米制單位
| Specification for test pieces and test methods for metallic materials - Tensile tests - Uninterrupted creep and rupture tests - Metric units
|
| BS 4A 4-1966
| 飛機金屬材料試樣和試驗方法.米制單位
| Test pieces and test methods for metallic materials for aircraft - Metric units
|
| BS 5600-3.6-1988
| 粉末冶金材料和制品.第3部分:燒結金屬材料和制品（不包活硬質合金）試驗方法.第6節:液體滲透率測定
| Powder metallurgical materials and products - Methods of testing sintered metal materials and products, excluding hardmetals - Determination of fluid permeability
|
| BS 5714-1979
| 金屬材料電阻率的測量方法
| Method of measurement of resistivity of metallic materials
|
| BS 6404-8.6-1988
| 磁性材料.第8部分:專用材料.第6節:軟磁性金屬材料
| Magnetic materials - Individual materials - Specification for soft magnetic metallic materials
|
| BS 6722-1986
| 金屬材料尺寸推薦規范
| Recommendations for dimensions of metallic materials
|
| BS 7252-1-1997
| 外科植入物用金屬材料.可鍛不銹鋼規范
| Metallic materials for surgical implants - Specification for wrought stainless steel
|
| BS 7252-10-1997
| 外科植物入用金屬材料.第10部分:煅制鈦5-鋁2.5-鐵合金規范
| Metallic materials for surgical implants - Specification for wrought titanium 5-aluminium 2,5-iron alloy
|
| BS 7252-11-1995
| 外科植入物用金屬材料.第11部分:可鍛鈦6-鋁7-鈮合金規范
| Metallic materials for surgical implants - Specification for wrought titanium 6-aluminium 7-niobium alloy
|
| BS 7252-12-1997
| 外科植物入用金屬材料.第12部分:煅制鈷-鉻-鉬合金規范
| Metallic materials for surgical implants - Specification for wrought cobalt-chromium-molybdenum alloy
|
| BS 7252-13-1997
| 外科植入物用金屬材料.外科植入用非合金鉭規范
| Metallic materials for surgical implants - Specification for unalloyed tantalum for surgical implant applications
|
| BS 7252-3-1997
| 外科植入物用金屬材料.鍛制鈦6-鋁4-釩合金規范
| Metallic materials for surgical implants - Specification for wrought titanium 6-aluminium 4-vanadium alloy
|
| BS 7252-4-1997
| 外科植入物用金屬材料.第4部分:鈷-鉻-鉬鑄造合金規范
| Metallic materials for surgical implants - Specification for cobalt-chromium-molybdenum casting alloy
|
| BS 7252-5-1994
| 外科植入物用金屬材料.第5部分:可鍛鈷-鉻-鎢-鎳合金規范
| Metallic materials for surgical implants - Specification for wrought cobalt-chromium-tungsten-nickel alloy
|
| BS 7252-6-1997
| 外科植入物用金屬材料.可鍛鈷-鎳-鉻-鉬合金規范
| Metallic materials for surgical implants - Specification for wrought cobalt-nickel-chromium-molybdenum alloy
|
| BS 7252-7-1994
| 外科植入物用金屬材料.第7部分:鈷-鉻-鎳-鉬-鐵合金規范
| Metallic materials for surgical implants - Specification for cobalt-chromium-nickel-molybdenum-iron alloy
|
| BS 7252-8-1997
| 外科植入物用金屬材料.可鍛鈷-鎳-鉻-鉬-鎢-鐵合金規范
| Metallic materials for surgical implants - Specification for wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy
|
| BS 7252-9-1993
| 外科植物入用金屬材料.第9部分:高氮不銹鋼規范
| Metallic materials for surgical implants - Specification for high-nitrogen stainless steel
|
| BS 7253-2-1997
| 外科植入物用非金屬材料.高純度氧化鋁陶瓷材料規范
| Non-metallic materials for surgical implants - Specification for ceramic materials based on high purity alumina
|
| BS 7253-3-1990
| 外科植入物用非金屬材料.第3部分:熱硫化硅彈性體制外科植入物規范
| Non-metallic materials for surgical implants - Specification for surgical implants made of heat-vulcanized silicone elastomer
|
| BS 7253-6-1997
| 外科植入非金屬材料.基于氧化釔穩定處理的四方形氧化鋯陶瓷材料規范
| Non-metallic materials for surgical implants - Specification for ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP)
|
| BS 7270-2006
| 金屬材料.控制軸向疲勞的恒定振幅應力.試驗方法
| Metallic materials - Constant amplitude strain controlled axial fatigue - Method of test
|
| BS 7448-1-1991
| 斷裂結構韌性試驗.金屬材料的KIc臨界CTOD和臨界J值的測定方法
| Fracture mechanics toughness tests - Method for determination of KIc, critical CTOD and critical J values of metallic materials
|
| BS 7448-2-1997
| 斷裂機械韌性試驗.第2部分:金屬材料焊接的KDOWNIDOWNc值、臨界CTOD值和臨界J值的測定方法
| Fracture mechanics toughness tests - Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials
|
| BS 7448-3-2005
| 斷裂機械韌性試驗.應力強度因子大于3.0 MPa m0.5 s-1的增長速度下金屬材料斷裂韌性的測定方法
| Fracture mechanics toughness tests - Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa m0.5 s-1
|
| BS 7448-4-1997
| 斷裂機械韌性試驗.金屬材料穩定裂紋延伸的抗斷裂曲線和初始值的測定方法
| Fracture mechanics toughness tests - Method for determination of fracture resistance curves and initiation values for stable crack extension in metallic materials
|
| BS 7766-1994
| 金屬材料潛在影響人類用水質量的評定規范
| Specification for assessment of the potential for metallic materials to affect adversely the quality of water intended for human consumption
|
| BS A 303-1994
| 強度等級小于或等于1100 MPa的有涂層或無涂層短長度或中長度MJ螺紋的由金屬材料制成的標稱12角螺栓頭標稱桿
| Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 304-1994
| 強度等級小于或等于1100 MPa的有涂層或無涂層長長度MJ螺紋的由金屬材料制成的標稱12角螺栓頭標稱或節徑桿螺
| Bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 306-1994
| 經過表面處理或沒經過表面處理由金屬材料制成的萬能頭實心鉚釘.尺寸
| Rivets, solid, universal head, metallic material, with or without surface treatment - Dimensions
|
| BS A 307-1994
| 強度等級小于或等于1100 MPa的有涂層或無涂層長長度MJ螺紋由金屬材料制成的標稱花鍵頭、標稱或節徑桿螺栓.
| Bolts, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 308-1994
| 強度等級小于或等于1100 MPa的有涂層或無涂層短長度或中長度MJ螺紋的由金屬材料制成的標稱花鍵頭標稱桿螺栓
| Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 309-1994
| 強度等級小于或等于1100 MPa的有涂層或無涂層長長度MJ螺紋的由金屬材料制成的大六角頭標稱或節徑桿螺栓.尺
| Bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 310-1995
| 強度等級小于或等于1250MPa-1800MPa的有涂層或無涂層短長度或中長度MJ螺紋的由金屬材料制成的標稱大12角螺
| Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa - Dimensions
|
| BS A 311-1997
| 航空航天.強度級小于或等于1100 MPa的涂層或未涂層金屬材料標稱桿短長度或中等長度MJ螺紋的內部偏移十字形
| Aerospace - Screws, 100 ° reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 312-1997
| 強度級小于或等于1100MPa的涂層或未涂層金屬材料制階梯形桿、短長度或中等長度MJ螺紋的內偏移十字形肋狀或
| Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 313-1997
| 航空航天.強度級小于或等于1100MPa的涂層或未涂層金屬材料制節徑桿長長度MJ螺紋的內偏移十字形肋狀或非肋狀
| Areospace - Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 322-1998
| 內分支凸型或非凸型驅動的金屬材料涂層或未土層的強度級低于或等于1100Mpa的平頭帶螺紋螺釘.尺寸
| Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 326-1998
| 有表面處理或無表面處理金屬材料的帶圓頂100°標稱埋頭實心鉚釘.尺寸
| Rivets, solid, 100 ° normal countersunk head with dome, metallic material, with or without surface treatment - Dimensions
|
| BS A 331-1998
| 強度級小于或等于1275MPa的涂層或未涂層金屬材料制標稱或節徑桿長長度MJ螺紋扎制雙六角頭螺拴.尺寸
| Bolts, reduced bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1275 MPa - Dimensions
|
| BS A 353-2000
| 涂覆或未涂覆的金屬材料制的MJ螺紋游動自鎖螺母的襯套.尺寸
| Inserts, with self-locking floating nut, with MJ threads, in metallic material, coated or uncoated - Dimensions
|
| BS A 354-2000
| 涂覆或未涂覆的金屬材料制的封閉式MJ螺紋的自鎖襯套.尺寸
| Inserts, self-locking, with MJ threads, closed type, in metallic material, coated or uncoated - Dimensions
|
| BS A 355-2000
| 涂覆或未涂覆的金屬材料制的開放式MJ螺紋自鎖襯套.尺寸
| Inserts, self-locking, with MJ threads, open type, in metallic material, coated or uncoated - Dimensions
|
| BS A 356-2000
| 覆層的或未覆層的金屬材料制的封閉式小尺寸法蘭緣MJ螺紋自鎖襯套.尺寸
| Inserts, self-locking, with MJ threads, reduced flanges, closed type, in metallic material, coated or uncoated - Dimensions
|
| BS A 357-2000
| 金屬材料制的涂覆或未涂覆的帶間隙孔的襯套.尺寸
| Inserts, with clearance hole, in metallic material, coated or uncoated - Dimensions
|
| BS A 361-2000
| 經過表面處理或未經過表面處理的金屬材料制100度標稱埋頭實心鉚釘.尺寸
| Rivets, solid, 100 ° normal countersunk head, in metallic material, with or without surface treatment - Dimensions
|
| BS CWA 15261-1-2005
| 測量金屬材料機械試驗的不確定性.低循環疲勞試驗的不確定性評價
| Measurement uncertainties in mechanical tests on metallic materials - The evaluation of uncertainties in low-cycle fatigue testing
|
| BS CWA 15261-2-2005
| 測量金屬材料機械試驗的不確定性.抗拉試驗的不確定性評價
| Measurement uncertainties in mechanical tests on metallic materials - The evaluation of uncertainties in tensile testing
|
| BS CWA 15261-3-2005
| 測量金屬材料機械試驗的不確定性.蠕變試驗的不確定性評價
| Measurement uncertainties in mechanical tests on metallic materials - The evaluation of uncertainties in creep testing
|
| BS CWA 15627-2006
| 金屬材料用小型沖壓試驗方法
| Small punch test method for metallic materials
|
| BS DD 256-2002
| 生活用水質量不良影響的金屬材料用潛力評估.規范
| Assessment of the potential for metallic materials to affect adversely the quality of water intended for human consumption - Specification
|
| BS EN 10002-1-2001
| 金屬材料拉伸試驗.常溫試驗方法
| Tensile testing of metallic materials - Method of test at ambient temperature
|
| BS EN 10002-5-1992
| 金屬材料拉伸試驗.第5部分:高溫試驗方法
| Tensile testing of metallic materials - Method of test at elevated temperatures
|
| BS EN 10036-1991
| 黑色金屬材料的化學分析.鋼鐵中碳總含量的測定.在氧氣流中燃燒后的重力測定法
| Chemical analysis of ferrous materials - Determination of total carbon in steels and irons - Gravimetric method after combustion in a stream of oxygen
|
| BS EN 10045-1-1990
| 金屬材料的夏（比）氏沖擊試驗.V形和U形切口試驗方法
| Charpy impact test on metallic materials - Test method (V- and U-notches)
|
| BS EN 10045-2-1993
| 金屬材料的夏（比）氏沖擊試驗.第2部分:沖擊試驗機的檢驗方法
| Charpy impact test on metallic materials - Method for the verification of impact testing machines
|
| BS EN 10071-1991
| 黑色金屬材料的化學分析.鋼鐵中錳含量的測定.電勢滴定法
| Chemical analysis of ferrous materials - Determination of manganese in steels and irons - Electrometric titration method
|
| BS EN 1011-1-1998
| 焊接.金屬材料焊接的推薦規范.電弧焊的通用指南
| Welding - Recommendations for welding of metallic materials - General guidance for arc welding
|
| BS EN 1011-2-2001
| 焊接.金屬材料焊接的推薦規范.鐵素體鋼的電弧焊接
| Welding - Recommendations for welding of metallic materials - Arc welding of ferritic steels
|
| BS EN 1011-3-2000
| 焊接.金屬材料焊接的推薦規范.不銹鋼的電弧焊接
| Welding - Recommendations for welding of metallic materials - Arc welding of stainless steels
|
| BS EN 1011-4-2000
| 焊接.金屬材料焊接的推薦規范.鋁及鋁合金的電弧焊接
| Welding - Recommendations for welding of metallic materials - Arc welding of aluminium and aluminium alloys
|
| BS EN 1011-5-2003
| 焊接.金屬材料焊接的推薦規程.覆層鋼的焊接
| Welding - Recommendations for welding of metallic materials - Welding of clad steel
|
| BS EN 1011-6-2005
| 焊接.金屬材料焊接的建議.第6部分:激光束焊接
| Welding - Recommendations for welding of metallic materials - Part 6: Laser beam welding
|
| BS EN 1011-7-2004
| 焊接.金屬材料焊接的推薦規范.電子束焊
| Welding - Recommendations for welding of metallic materials - Electron beam welding
|
| BS EN 1011-8-2004
| 焊接.金屬材料焊接的推薦規范.鑄鐵的焊接
| Welding - Recommendations for welding of metallic materials - Welding of cast irons
|
| BS EN 10136-1991
| 黑色金屬材料的化學分析.鋼鐵中鎳含量的測定.火焰原子吸收光譜測定法
| Chemical analysis of ferrous materials - Determination of nickel in steels and irons - Flame atomic absorption spectrometric method
|
| BS EN 10184-2006
| 黑色金屬材料化學分析.非合金鋼鐵中磷的測定.鉬藍光度法測定酸溶硅量
| Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method
|
| BS EN 10200-1992
| 黑色金屬材料化學分析方法.用分光光度法測定鋼中的硼含量
| Chemical analysis of ferrous materials - Determination of boron in steel - Spectrophotometric method
|
| BS EN 10204-2004
| 金屬材料.檢驗文件的類型
| Metallic materials - Types of inspection documents
|
| BS EN 10274-1999
| 金屬材料.失落重力撕裂試驗
| Metallic materials - Drop weight tear test
|
| BS EN 10275-1999
| 金屬材料.管形環液壓試驗
| Metallic materials - Tube ring hydraulic pressure test
|
| BS EN 10291-2000
| 金屬材料.拉伸同軸蠕變試驗.試驗方法
| Metallic materials - Uniaxial creep testing in tension - Methods of test
|
| BS EN 10319-1-2003
| 金屬材料.拉伸應力松弛試驗.試驗機規程
| Metallic materials - Tensile stress relaxation testing - Procedure for testing machines
|
| BS EN 10319-2-2006
| 金屬材料.拉伸應力松弛測試.螺栓連接模型用程序
| Metallic materials - Tensile stress relaxation testing - Procedure for bolted joint models
|
| BS EN 1043-1-1996
| 金屬材料焊接的破壞試驗.硬度試驗.第1部分:電弧焊接的硬度試驗
| Destructive tests on welds in metallic materials - Hardness testing - Hardness test on arc welded joints
|
| BS EN 1043-2-1997
| 金屬材料焊接點的破壞試驗.第2部分:焊接連接件的顯微硬度試驗
| Destructive tests on welds in metallic materials - Hardness testing - Micro hardness testing on welded joints
|
| BS EN 12062-1998
| 焊縫的無損檢驗.對金屬材料的一般規則
| Non-destructive examination of welds - General rules for metallic materials
|
| BS EN 12500-2000
| 金屬材料防腐.大氣環境下的腐蝕概率.大氣環境腐蝕性的分類、測定和評估
| Protection of metallic materials against corrosion - Corrosion likelihood in atmospheric environment - Classification, determination and estimation of corrosivity of atmospheric environments
|
| BS EN 12501-1-2003
| 金屬材料的防腐蝕.土壤中腐蝕可能性.總則
| Protection of metallic materials against corrosion - Corrosion likelihood in soil - General
|
| BS EN 12501-2-2003
| 金屬材料的防腐蝕.土壤中腐蝕可能性.低合金和非合金黑色金屬材料
| Protection of metallic materials against corrosion - Corrosion likelihood in soil - Low alloyed and non alloyed ferrous materials
|
| BS EN 12502-1-2005
| 金屬材料腐蝕防護.配水和蓄水系統中腐蝕可能性的評價指南.總則
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - General
|
| BS EN 12502-2-2005
| 金屬材料腐蝕防護.配水和蓄水系統中腐蝕可能性的評價指南.銅和銅合金的影響因素
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Influencing factors for copper and copper alloys
|
| BS EN 12502-3-2005
| 金屬材料腐蝕防護.配水和蓄水系統中腐蝕可能性的評價指南.熱浸鍍鋅鐵類材料的影響因素
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Influencing factors for hot dip galvanised ferrous materials
|
| BS EN 12502-4-2005
| 金屬材料腐蝕防護.配水和蓄水系統中腐蝕可能性的評價指南.不銹鋼的影響因素
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Influencing factors for stainless steels
|
| BS EN 12502-5-2005
| 金屬材料腐蝕防護.配水和蓄水系統中腐蝕可能性的評價指南.鑄鐵、非合金和低合金鋼的影響因素
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Influencing factors for cast iron, unalloyed and low alloyed steels
|
| BS EN 13068-3-2001
| 無損檢驗.射線檢驗.χ和γ射線對金屬材料進行射線檢驗的一般原理
| Non-destructive testing - Radioscopic testing - General principles of radioscopic testing of metallic materials by X- and gamma rays
|
| BS EN 1320-1997
| 金屬材料焊接點的破壞試驗.斷裂試驗
| Destructive tests on welds in metallic materials - Fracture tests
|
| BS EN 1321-1997
| 金屬材料焊接點的破壞試驗.焊接點的宏觀和微觀檢驗
| Destructive test on welds in metallic materials - Macroscopic and microscopic examination of welds
|
| BS EN 13397-2002
| 工業閥.金屬材料制隔膜閥
| Industrial valves - Diaphragm valves made of metallic materials
|
| BS EN 13479-2005
| 焊接消耗品.金屬材料熔焊用填充金屬和焊劑的一般產品標準
| Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
|
| BS EN 1418-1998
| 焊接操作人員.金屬材料全機械化焊接和自動焊接用的熔焊和電阻焊定位器的焊接操作人員的批準試驗
| Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
|
| BS EN 14784-2-2005
| 無損檢驗.用存儲熒光成像板的工業計算輻射攝影術.用X射線和γ射線檢驗金屬材料的一般原則
| Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - General principles for testing of metallic materials using X-rays and gamma rays
|
| BS EN 14868-2005
| 金屬材料防腐蝕保護.封閉水循環系統中腐蝕可能性的評定指南
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems
|
| BS EN 2002-1-2005
| 航天航空系列.金屬材料.試驗方法.室溫下抗拉試驗
| Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature
|
| BS EN 2002-2-2005
| 航天航空系列.金屬材料.試驗方法.高溫下抗拉試驗
| Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature
|
| BS EN 2032-1-2002
| 金屬材料.常用命名
| Metallic materials - Conventional designation
|
| BS EN 2032-2-1994
| 金屬材料.交付技術狀態下冶金狀態標記編碼
| Metallic materials - Coding of metallurgical condition in delivery condition
|
| BS EN 2078-2002
| 航空航天系列.金屬材料.制造進度表、檢驗進度表、檢驗和試驗報告.定義、一般原則、準備和批準
| Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval
|
| BS EN 2243-1-2005
| 航空航天系列.非金屬材料.結構膠粘劑.試驗方法.單面搭接剪切
| Non-metallic materials - Structural adhesives - Test method - Part 1: Single lap shear
|
| BS EN 2243-2-2005
| 航空航天系列.非金屬材料.結構膠粘劑.試驗方法.金屬間剝離試驗
| Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal
|
| BS EN 2243-3-2005
| 航空航天系列.非金屬材料.結構膠粘劑.試驗方法.金屬蜂窩狀?yuàn)A心材料的剝離試驗
| Non-metallic materials - Structural adhesives - Test method - Part 3: Peeling test metal-honeycomb core
|
| BS EN 2243-4-2005
| 航天航空系列.非金屬材料.結構膠粘劑.試驗方法.金屬蜂窩狀芯材的平面拉伸試驗
| Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 4: Metal-honeycomb core flatwise tensile test
|
| BS EN 2243-5-2005
| 航空航天系列.非金屬材料.結構膠粘劑.試驗方法.老化試驗
| Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests
|
| BS EN 2243-6-2005
| 航空航天系列.非金屬材料.結構膠粘劑.試驗方法.剪切應力和剪切應變量測定
| Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain
|
| BS EN 2310-1991
| 非金屬材料阻燃率的試驗方法
| Test methods for the flame resistance rating of non-metallic materials
|
| BS EN 23312-1993
| 繞結金屬材料和硬質合金.楊氏模量的測定
| Sintered metal materials and hardmetals - Determination of Young modulus
|
| BS EN 23369-1993
| 密封燒結金屬材料和硬質合金.密度的測定
| Impermeable sintered metal materials and hardmetals - Determination of density
|
| BS EN 24003-1993
| 不密封燒結金屬材料.氣泡試驗孔隙尺寸的測定
| Permeable sintered metal materials - Determination of bubble test pore size
|
| BS EN 25754-1993
| 燒結金屬材料(不包括硬質金屬).無缺口沖擊試樣
| Sintered metal materials, excluding hardmetals - Unnotched impact test piece
|
| BS EN 2667-6-2002
| 航空航天系列.非金屬材料.泡沫結構粘合劑.試驗方法.吸水性的測定
| Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Determination of water absorption
|
| BS EN 2744-1992
| 非金屬材料.優選的試驗溫度
| Non-metallic materials - Preferred test temperatures
|
| BS EN 2781-1998
| 非金屬材料.結構膠粘劑.試驗方法.初始厚度的測定
| Non-metallic materials - Structural adhesives - Test methods - Determination of the primer thickness
|
| BS EN 288-9-1999
| 金屬材料焊接程序的規范和批準.傳輸管道的陸地和海岸現場對焊管道的焊接程序試驗
| Specification and approval of welding procedures for metallic materials - Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines
|
| BS EN 4000-2002
| 航空航天系列.金屬材料.金屬半成品的尺寸標準起草和說明規則
| Aerospace series - Metallic materials - Rules for the drafting and presentation of dimensional standards for metallic semi-finished products
|
| BS EN 4258-1998
| 金屬材料.標準化的一般組織.歐洲標準的類型與其使用之間的鏈接
| Metallic materials - General organization of standardization - Links between types of EN standards and their use
|
| BS EN 444-1994
| 無損檢驗.用X和γ射線對金屬材料進行射線檢查的一般原則
| Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays
|
| BS EN 764-4-2002
| 壓力設備.金屬材料的交貨技術條件的編制
| Pressure equipment - Establishment of technical delivery conditions for metallic materials
|
| BS EN 875-1995
| 金屬材料焊接的破壞試驗.沖擊試驗.試樣定位、槽口取向和檢驗
| Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
|
| BS EN 876-1995
| 金屬材料焊接的破壞試驗.熔焊接點中焊接金屬的縱向拉伸試驗
| Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints
|
| BS EN 895-1995
| 金屬材料焊接的破壞試驗.橫向抗拉試驗
| Destructive tests on welds in metallic materials - Transverse tensile test
|
| BS EN 910-1996
| 金屬材料焊接點的破壞試驗.彎曲試驗
| Destructive tests on welds in metallic materials - Bend tests
|
| BS EN ISO 10271-2001
| 牙科金屬材料.腐蝕試驗方法
| Dental metallic materials - Corrosion test methods
|
| BS EN ISO 11114-1-1998
| 可運輸氣瓶.裝氣氣瓶和閥門材料的兼容性.金屬材料
| Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Metallic materials
|
| BS EN ISO 11114-2-2001
| 可運輸氣瓶.氣瓶和含氣閥門材料的可兼容性.非金屬材料
| Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Non-metallic materials
|
| BS EN ISO 11114-4-2007
| 運輸儲氣瓶.儲氣瓶和閥門材料與盛裝氣體的兼容性.選擇耐氫脆金屬材料的試驗方法
| Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Test methods for selecting metallic materials resistant to hydrogen embrittlement
|
| BS EN ISO 12737-2005
| 金屬材料.平面變形斷裂韌性的測定
| Metallic materials - Determination of plane-strain fracture toughness
|
| BS EN ISO 14554-1-2001
| 焊接的質量要求.金屬材料的電阻焊接.全面質量要求
| Quality requirements for welding - Resistance welding of metallic materials - Comprehensive quality requirements
|
| BS EN ISO 14554-2-2001
| 焊接的質量要求.金屬材料的電阻焊接.基本質量要求
| Quality requirements for welding - Resistance welding of metallic materials - Elementary quality requirements
|
| BS EN ISO 14555-2006
| 焊接.金屬材料的電弧螺栓焊
| Welding - Arc stud welding of metallic materials
|
| BS EN ISO 14577-4-2007
| 金屬材料.測量硬度和材料參數用儀器壓痕試驗.金屬和非金屬覆層試驗方法
| Metallic materials - Instrumented indentation test for hardness and materials parameters - Test method for metallic and non-metallic coatings
|
| BS EN ISO 15607-2003
| 金屬材料焊接程序規范和合格鑒定.總則
| Specification and qualification of welding procedures for metallic materials - General rules
|
| BS EN ISO 15609-1-2004
| 金屬材料的焊接程序規范和合格鑒定.焊接程序規范.電弧焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Arc welding
|
| BS EN ISO 15609-3-2004
| 金屬材料焊接程序的規范和合格評定.焊接程序規范.電子束焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Electron beam welding
|
| BS EN ISO 15609-4-2004
| 金屬材料焊接程序的規范和合格鑒定.焊接程序規范.激光束焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Laser beam welding
|
| BS EN ISO 15609-5-2004
| 金屬材料的焊接程序規范和合格鑒定.焊接程序規范.電阻焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Resistance welding
|
| BS EN ISO 15610-2003
| 金屬材料焊接程序的規范和認可.基于試驗消耗品的認可
| Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables
|
| BS EN ISO 15611-2003
| 金屬材料焊接程序規范和合格鑒定.根據已有焊接經驗進行合格鑒定
| Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience
|
| BS EN ISO 15612-2004
| 金屬材料焊接程序的規范和合格鑒定.標準焊接程序采用的合格鑒定
| Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure
|
| BS EN ISO 15613-2004
| 金屬材料的焊接程序的鑒定和規范.基于預生產焊接試驗的合格鑒定
| Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test
|
| BS EN ISO 15614-1-2004
| 金屬材料焊接程序的規范和鑒定.焊接程序試驗.鋼的弧焊和氣焊以及鎳和鎳合金的弧焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Arc and gas welding of steels and arc welding of nickel and nickel alloys
|
| BS EN ISO 15614-10-2005
| 金屬材料焊接程序的規范和鑒定.焊接程序試驗.高壓干焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Hyperbaric dry welding
|
| BS EN ISO 15614-11-2002
| 金屬材料焊接程序的規范和合格鑒定.焊接程序試驗.電子和激光束焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Electron and laser beam welding
|
| BS EN ISO 15614-12-2004
| 金屬材料焊接程序的規范和合格鑒定.焊接程序試驗.點焊、縫焊和凸焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Spot, seam and projection welding
|
| BS EN ISO 15614-13-2005
| 金屬材料焊接程序的規范和鑒定.焊接程序試驗.電阻對接焊和電弧對接焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Resistance butt and flash welding
|
| BS EN ISO 15614-2-2005
| 金屬材料焊接過程的規范和鑒定.焊接過程試驗.鋁及其合金的電弧焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Arc welding of aluminium and its alloys
|
| BS EN ISO 15614-4-2005
| 金屬材料焊接過程的規范和鑒定.焊接過程試驗.鋁鑄件的精焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Finishing welding of aluminium castings
|
| BS EN ISO 15614-5-2004
| 金屬材料焊接程序的規范和鑒定.焊接程序試驗.鈦、鋯及其合金電弧焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Arc welding of titanium, zirconium and their alloys
|
| BS EN ISO 15614-6-2006
| 金屬材料焊接程序的規范和合格鑒定.焊接程序試驗.銅及其合金的弧焊和氣焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Arc and gas welding of copper and its alloys
|
| BS EN ISO 15614-7-2007
| 金屬材料焊接程序規范和鑒定.焊接程序試驗.覆蓋焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Overlay welding
|
| BS EN ISO 15614-8-2002
| 金屬材料焊接程序的規范和合格鑒定.焊接程序試驗.管對管焊接. 平板接合
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Welding of tubes to tube-plate joints
|
| BS EN ISO 15620-2000
| 焊接.金屬材料摩擦焊接
| Welding - Friction welding of metallic materials
|
| BS EN ISO 17641-1-2004
| 金屬材料焊接的有損試驗.焊件的熱裂試驗.弧焊過程.概要
| Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - General
|
| BS EN ISO 17641-2-2005
| 金屬材料焊接的有損試驗.焊接的熱裂試驗.弧焊工藝.自束試驗
| Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Self-restraint tests
|
| BS EN ISO 17642-1-2004
| 金屬材料中焊接的有損檢驗.焊接的冷裂試驗.弧焊工藝.總則
| Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - General
|
| BS EN ISO 17642-2-2005
| 金屬材料焊接的有損試驗.焊接的冷裂試驗.弧焊工藝.自束試驗
| Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Self-restraint tests
|
| BS EN ISO 17642-3-2005
| 金屬材料焊接的有損檢驗.焊接的冷裂試驗.弧焊工藝.外部載荷試驗
| Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Externally loaded tests
|
| BS EN ISO 17653-2003
| 金屬材料焊縫的有損試驗.電阻點焊焊縫的扭轉試驗
| Destructive tests on welds in metallic materials - Torsion test of resistance spot welds
|
| BS EN ISO 17654-2003
| 金屬材料焊縫的有損試驗.電阻焊接.電阻縫焊的壓力試驗
| Destructive tests on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds
|
| BS EN ISO 17655-2003
| 金屬材料焊縫的有損試驗.測量δ鐵素體用的取樣方法
| Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement
|
| BS EN ISO 18265-2003
| 金屬材料.硬度值的換算
| Metallic materials - Conversion of hardness values
|
| BS EN ISO 18278-1-2004
| 電阻焊.可焊性.金屬材料的電阻點焊、縫焊和凸焊的可焊性評定
| Resistance welding - Weldability - Assessment of weldability for resistance spot, seam and projection welding of metallic materials
|
| BS EN ISO 20482-2003
| 金屬材料.薄板材和帶材.埃里克森壓凹試驗
| Metallic materials - Sheet and strip - Erichsen cupping test
|
| BS EN ISO 22674-2007
| 牙科學.固定式和移動式修復體和牙科器具用金屬材料
| Dentistry - Metallic materials for fixed and removable restorations and appliances
|
| BS EN ISO 2738-2000
| 燒結金屬材料(硬金屬除外).滲透性燒結金屬材料.密度、油含量和開口孔隙度的測定
| Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity
|
| BS EN ISO 2740-2007
| 硬質金屬除外的燒結金屬材料.抗拉試驗工件
| Sintered metal materials, excluding hardmetals - Tensile test pieces
|
| BS EN ISO 3325-1999
| 不包括硬質合金的燒結金屬材料.橫向斷裂強度的測定
| Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength
|
| BS EN ISO 376-2004
| 金屬材料.驗證單軸向試驗機用測力儀的校準
| Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
|
| BS EN ISO 3785-2006
| 金屬材料.關于產品質地的試驗樣品軸的命名
| Metallic materials - Designation of test specimen axes in relation to product texture
|
| BS EN ISO 3834-1-2006
| 金屬材料熔焊的質量要求.質量要求的適當級別的選擇標準
| Quality requirements for fusion welding of metallic materials - Criteria for the selection of the appropriate level of quality requirements
|
| BS EN ISO 3834-2-2006
| 金屬材料熔焊的質量要求.綜合質量要求
| Quality requirements for fusion welding of metallic materials - Comprehensive quality requirements
|
| BS EN ISO 3834-3-2006
| 金屬材料熔焊的質量要求.標準質量要求
| Quality requirements for fusion welding of metallic materials - Standard quality requirements
|
| BS EN ISO 3834-4-2006
| 金屬材料熔焊的質量要求.基本質量要求
| Quality requirements for fusion welding of metallic materials - Elementary quality requirements
|
| BS EN ISO 3834-5-2006
| 金屬材料熔焊的質量要求.有必要聲明和ISO 3834-2、ISO 3834-3或ISO 3834-4質量要求一致的文件
| Quality requirements for fusion welding of metallic materials - Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4
|
| BS EN ISO 3892-2001
| 金屬材料的轉化覆層.單位面積覆層質量的測定.重量分析法
| Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods
|
| BS EN ISO 3928-1999
| 燒結金屬材料.不包括硬質金屬.疲勞試驗件
| Sintered metal materials, excluding hardmetals - Fatigue test pieces
|
| BS EN ISO 4022-1988
| 可滲性燒結金屬材料.液體滲透性的測定
| Permeable sintered metal materials - Determination of fluid permeability
|
| BS EN ISO 4545-1-2006
| 金屬材料.努氏硬度試驗.試驗方法
| Metallic materials - Knoop hardness test - Test method
|
| BS EN ISO 4545-2-2006
| 金屬材料.努氏硬度試驗.試驗機械的檢驗和校準
| Metallic materials - Knoop hardness test - Verification and calibration of testing machines
|
| BS EN ISO 4545-3-2006
| 金屬材料.努氏硬度試驗.標準塊校準
| Metallic materials - Knoop hardness test - Calibration of reference blocks
|
| BS EN ISO 4545-4-2006
| 金屬材料.努氏硬度試驗.硬度值表
| Metallic materials - Knoop hardness test - Tables of hardness values
|
| BS EN ISO 6506-1-2006
| 金屬材料.布氏硬度試驗.試驗方法
| Metallic materials - Brinell hardness test - Test method
|
| BS EN ISO 6506-2-2006
| 金屬材料.布氏硬度試驗.布氏硬度試驗機的驗證和校準
| Metallic materials - Brinell hardness test - Verification and calibration of testing machines
|
| BS EN ISO 6506-3-2006
| 金屬材料.布氏硬度試驗.基準塊校準
| Metallic materials - Brinell hardness test - Calibration of reference blocks
|
| BS EN ISO 6506-4-2006
| 金屬材料.布氏硬度試驗.硬度值表
| Metallic materials - Brinell hardness test - Table of hardness values
|
| BS EN ISO 6507-1-2006
| 金屬材料.維式硬度試驗.試驗方法
| Metallic materials - Vickers hardness test - Test method
|
| BS EN ISO 6507-2-2006
| 金屬材料.維式硬度試驗.試驗機器的驗證和校準
| Metallic materials - Vickers hardness test - Verification and calibration of testing machines
|
| BS EN ISO 6507-3-2006
| 金屬材料.維式硬度試驗.試驗方法
| Metallic materials - Vickers hardness test - Calibration of reference blocks
|
| BS EN ISO 6507-4-2006
| 金屬材料.維氏硬度試驗.硬度數值表
| Metallic materials - Vickers hardness test - Tables of hardness values
|
| BS EN ISO 6508-1-2006
| 金屬材料.布氏硬度試驗.試驗方法(標度A、B、C、D、E、F、G、H、K、N、T)
| Metallic materials - Rockwell hardness test - Test method (scales A, B, C, D, E, F, G, H, K, N, T)
|
| BS EN ISO 6508-2-2006
| 金屬材料.布氏硬度試驗.試驗機的鑒定和校準(標度A、B、C、D、E、F、G、H、K、N、T)
| Metallic materials - Rockwell hardness test - Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N , T)
|
| BS EN ISO 6508-3-2006
| 金屬材料.布氏硬度試驗.基準塊的校準(標度A、B、C、D、E、F、G、H、K、N、T)
| Metallic materials - Rockwell hardness test - Calibration and reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
|
| BS EN ISO 6520-1-2007
| 焊接和相關工藝.金屬材料中幾何缺陷的分類.熔焊
| Welding and allied processes - Classification of geometric imperfections in metallic materials - Fusion welding
|
| BS EN ISO 6520-2-2002
| 焊接及相關工藝.金屬材料中幾何缺陷的分類.壓力焊
| Welding and allied processes - Classification of geometric imperfections in metallic materials - Welding with pressure
|
| BS EN ISO 7153-1-2001
| 外科器械.金屬材料.不銹鋼
| Surgical instruments - Metallic materials - Stainless steel
|
| BS EN ISO 7438-2005
| 金屬材料.彎曲試驗
| Metallic materials - Bend test
|
| BS EN ISO 7500-1-2004
| 金屬材料.靜態單軸向試驗機的鑒定.拉伸和壓縮試驗機.測力系統的鑒定和校準
| Metallic materials - Verification of static uniaxial testing machines - Tension/compression testing machines - Verification and calibration of the force-measuring system
|
| BS EN ISO 7500-2-2007
| 金屬材料.靜態單軸向試驗機鑒定.拉伸蠕變試驗機.作用力驗證
| Metallic materials - Verification of static uniaxial testing machines - Tension creep testing machines - Verification of the applied force
|
| BS EN ISO 7799-2000
| 金屬材料.厚度≤3mm板材和帶材.反向彎曲試驗
| Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test
|
| BS EN ISO 8491-2004
| 金屬材料.管材(全截面).彎曲試驗
| Metallic materials - Tube (in full section) - Bend test
|
| BS EN ISO 8492-2004
| 金屬材料.管材.壓扁試驗
| Metallic materials - Tube - Flattening test
|
| BS EN ISO 8493-2004
| 金屬材料.管材.擴口試驗
| Metallic materials - Tube - Drift-expanding test (ISO 8493:1998)
|
| BS EN ISO 8494-2004
| 金屬材料.管材.卷邊試驗
| Metallic materials - Tube - Flanging test
|
| BS EN ISO 8495-2004
| 金屬材料.管材.環形擴口試驗
| Metallic materials - Tube - Ring-expanding test
|
| BS EN ISO 8496-2004
| 金屬材料.管材.環形拉伸試驗
| Metallic materials - Tube - Ring tensile test
|
| BS EN ISO 9018-2003
| 金屬材料焊接的破壞試驗.十字形接縫和搭接縫的抗拉試驗
| Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints
|
| BS EN ISO 9513-2002
| 金屬材料.單軸向試驗用引伸計的校準
| Metallic materials - Calibration of extensometers used in uniaxial testing
|
| BS ISO 10113-2006
| 金屬材料.薄板材和帶材.測定塑料應力
| Metallic materials - Sheet and strip - Determination of plastic strain ratio
|
| BS ISO 10275-2007
| 金屬材料.薄板材和帶材.抗拉應力硬化指數的測定
| Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent
|
| BS ISO 12107-2003
| 金屬材料.疲勞試驗.數據的統計規劃和分析
| Metallic materials - Fatigue testing - Statistical planning and analysis of data
|
| BS ISO 12108-2003
| 金屬材料.疲勞試驗.疲勞裂痕增長試驗
| Metallic materials - Fatigue testing - Fatigue crack growth method
|
| BS ISO 14317-2007
| 非硬質金屬的燒結金屬材料.耐壓屈服強度的測定
| Sintered metal materials excluding hardmetals - Determination of compressive yield strength
|
| BS ISO 19819-2004
| 金屬材料.液態氦中的抗拉試驗
| Metallic materials - Tensile testing in liquid helium
|
| BS ISO 22826-2006
| 金屬材料焊縫的破壞性試驗.激光和電子束焊測定窄接頭硬度的試驗(維氏和努氏硬度試驗)
| Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
|
| BS ISO 23718-2007
| 金屬材料.機械測試.詞匯
| Metallic materials - Mechanical testing - Vocabulary
|
| BS ISO 3928-1999
| 不包括硬質合金的燒結金屬材料.疲勞試件
| Sintered metal materials, excluding hardmetals - Fatigue test pieces
|
| BS ISO 4498-2005
| 不包括硬質合金的燒結金屬材料.表觀硬度和顯微硬度的測定
| Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
|
| BS ISO 5832-2-1999
| 外科植入物.金屬材料.純鈦
| Implants for surgery - Metallic materials - Unalloyed titanium
|
| BS ISO 7625-2007
| 不包括硬質金屬的燒結金屬材料.制備碳含量測定用化學分析樣品
| Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
|
| BS ISO 7800-2003
| 金屬材料.線材.單向扭轉試驗
| Metallic materials - Wire - Simple torsion test
|
| BS M 37-1970
| 金屬材料和部件的腐蝕檢驗法
| Method for the etch inspection of metallic materials and components
|
| DD 186-1991
| 金屬材料的閾限應力強度因子和疲勞裂紋增長率的測定方法
| Method for determination of threshold stress intensity factors and fatigue crack growth rates in metallic materials
|
| 編號 | 中文名稱 | 英文名稱 |
|---|