| 編號 | 中文名稱 | 英文名稱 |
|---|
| DIN 13972-2-2002
| 牙科學.激光焊接質量保證.第2部分:激光焊接用相同和類似牙科金屬材料適用性
| Dentistry - Quality assurance during laser welding - Part 2: Suitability of identical and similar metallic dental materials for laser welding
|
| DIN 2032-1987
| 金屬包裝.薄板金屬材料的加螺定封包
| Metal packages; screwed closures of light gauge metal
|
| DIN 28052-5-1997
| 化工設備.工藝技術設備中混凝土構件非金屬材料表面處理.第5部分:合成涂層
| Chemical apparatus - Surface treatment of concrete components in process plants using non-metallic materials - Part 5: Combined coatings
|
| DIN 30690-2 Bb.1-1980
| 煤氣安裝用零部件.第2部分:煤氣器具用閥門的金屬材料要求.材料、強度數據的選用說明
| Component parts in the gas installation; requirements on metallic materials for valves being used for gas appliances, notes for selection for materials, strength data
|
| DIN 30690-2-1980
| 供氣裝置中的元部件.對煤氣用具中使用的開關金屬材料的要求
| Component parts in the gas installation; requirements on metallic materials for valves being used for gas appliances
|
| DIN 30742-1-1995
| 廢棄物處理工程.液體和固體的專用垃圾箱.第1部分:金屬材料制容積為 60 升 - 240 升的垃圾箱
| Waste disposal engineering - Waste containers for liquid and solid special waste - Part 1: Containers with a capacity from 60 l to 240 l made from metal material
|
| DIN 30910-1-1990
| 燒結金屬材料.WLB 燒結材料規范.第1部分: WLB 的說明注釋
| Sintered metal materials; Werkstoff-Leistungsbl?tter (WLB) sint-material specifications; part 1: explanatory notes for WLB
|
| DIN 30910-2-1990
| 燒結金屬材料.WLB 燒結材料規范.第2部分:過濾器用材料
| Sintered metal materials; Werkstoff-Leistungsbl?tter (WLB) sint-material specifications; part 2: materials for filters
|
| DIN 30910-3-2004
| 燒結金屬材料.燒結金屬規范.第3部分:軸承及具有軸承性能的結構件用材料
| Sintered metal materials - Sintered-material specifications - Part 3: Materials for bearings and structural parts with bearing properties
|
| DIN 30910-4-2004
| 燒結金屬材料.燒結金屬規范.第4部分:結構件用材料
| Sintered metal materials - Sintered-material specifications - Part 4: Materials for structural parts
|
| DIN 30910-6-1990
| 燒結金屬材料.WLB 燒結材料規范.第6部分:異型件用燒結熱鍛鋼
| Sintered metal materials; Werkstoff-Leistungsbl?tter (WLB) sint-material specifications; part 6: hot-forged sintered steels for structural parts
|
| DIN 30911-0-1990
| 燒結金屬材料.WLB 燒結材料規范.第0部分: SPN 的說明注釋
| Sintered metal materials; sint-testing procedures; part 0: explanatory notes for SPN
|
| DIN 30911-6-1990
| 燒結金屬材料.燒結試驗程序.第6部分:過濾器性能測定
| Sintered metal materials; sint-testing procedures; part 6: determination of filter properties
|
| DIN 30911-7-1990
| 燒結金屬材料.燒結試驗程序.第7部分:軟磁性測定
| Sintered metal materials; sint-testing procedures; part 7: determination of softmagnetic properties
|
| DIN 30912-1-1990
| 燒結金屬材料.燒結指南.第1部分:燒結件的機加工
| Sintered metal materials; sint-guide-lines; part 1: machining of sintered parts
|
| DIN 30912-2-1990
| 燒結金屬材料.燒結指南.第2部分:燒結件的設計
| Sintered metal materials; sint-guide-lines; part 2: designing of sintered parts
|
| DIN 30912-3-1990
| 燒結金屬材料.燒結指南.第3部分:燒結件的熱處理
| Sintered metal materials; sint-guide-lines; part 3: heat-treatment of sintered parts
|
| DIN 30912-4-1990
| 燒結金屬材料.燒結指南.第4部分:燒結件的表面處理
| Sintered metal materials; sint-guide-lines; part 4: surface-treatment of sintered parts
|
| DIN 30912-5-1990
| 燒結金屬材料.燒結指南.第5部分:燒結件的連接
| Sintered metal materials; sint-guide-lines; part 5: joining of sintered parts
|
| DIN 30912-6-1990
| 燒結金屬材料.燒結指南.第6部分:燒結鋼的振動強度
| Sintered metal materials; sint-guide-lines; part 6: fatigue strength of sintered steels
|
| DIN 4753-7-1988
| 飲用水和服務性用水的熱水器和水加熱裝置.采用抗腐蝕金屬材料作觸水面的防腐蝕處理.第7部分:要求和檢驗
| Water heaters and water heating installations for drinking water and service water; corrosion protection on the water side by corrosion-resistant metallic materials; requirements and testing
|
| DIN 50103-3-1995
| 金屬材料檢驗.洛氏硬度試驗.第3部分:薄鋼板用改良洛氏刻度盤 Bm 和 Fm
| Testing of metallic materials - Rockwell hardness test - Part 3: Modified Rockwell scales Bm and Fm for thin steel sheet
|
| DIN 50106-1978
| 金屬材料的檢驗；壓力試驗
| Testing of Metallic Materials; Compression Test
|
| DIN 50113-1982
| 金屬材料的檢驗.旋轉棒材彎曲疲勞試驗
| Testing of metals; Rotating bar bending fatigue test
|
| DIN 50115-1991
| 金屬材料的試驗.切口棒材撞擊試驗.試件的特殊形狀和評估方法
| Notched bar impact testing of metallic materials using test pieces other than ISO test pieces
|
| DIN 50125-2004
| 金屬材料的試驗.抗拉試驗用試樣
| Testing of metallic materials - Tensile test pieces
|
| DIN 50131-1974
| 金屬材料的檢驗.收縮率測定
| Testing of Metallic Materials; Determination of Shrinkage
|
| DIN 50141-1982
| 金屬材料的檢驗.剪切試驗
| Testing of metals; Shear test
|
| DIN 50142-1982
| 金屬材料的檢驗.扁鋼彎曲疲勞試驗
| Testing of metallic materials; Flat bending fatigue test
|
| DIN 50156-1-2007
| 金屬材料.里氏硬度試驗.第1部分:試驗方法
| Metallic materials - Leeb hardness test - Part 1: Test method
|
| DIN 50156-2-2007
| 金屬材料.里氏硬度試驗.第2部分:試驗裝置的檢驗和校準
| Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices
|
| DIN 50156-3-2007
| 金屬材料.里氏硬度試驗.第3部分:參考試塊的校準
| Metallic materials - Leeb hardness test - Part 3: Calibration of reference blocks
|
| DIN 50600-1980
| 金屬材料的檢驗.金相顯微照片.圖象比列及尺寸
| Testing of metallic materials; Metallographic Micrographs; Picture scales and formats
|
| DIN 50928-1985
| 金屬腐蝕.對與含水腐蝕劑接觸的涂層金屬材料防腐檢驗和評定
| Corrosion of metals; testing and assessment of the corrosion protection of coated metallic materials in contact with aqueous corrosive agents
|
| DIN 50929-1-1985
| 金屬腐蝕.承受外部腐蝕時金屬材料腐蝕的概率.總則
| Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; general
|
| DIN 50929-2-1985
| 金屬腐蝕.在承受外部腐蝕條件下金屬材料的腐蝕概率.建筑物內部使用的構件
| Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; service components inside buildings
|
| DIN 50929-3-1985
| 金屬腐蝕.承受外部腐蝕時金屬材料腐蝕的概率.掩埋的和水中的管道和結構零組件構件
| Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; buried and underwater pipelines and structural components
|
| DIN 50930-6-2001
| 金屬腐蝕.管、槽和裝置內水造成的金屬材料腐蝕.第6部分:飲用水成分的影響
| Corrosion of metals - Corrosion of metallic materials under corrosion load by water inside of tubes, tanks and apparatus - Part 6: Influence of the composition of drinking water
|
| DIN 51211-1978
| 金屬材料檢驗.金屬絲反響彎曲試驗
| Testing of Metallic Materials; Reverse Bend Test of Wires
|
| DIN 51212-1978
| 金屬材料檢驗.金屬絲的扭轉試驗
| Testing of Metallic Materials; Torsion Test of Wires
|
| DIN 51215-1975
| 金屬材料的試驗.金屬絲的繞曲試驗.一般數據
| Testing of Metallic Materials; Wrapping Test for Wires; General Information
|
| DIN 52108-2007
| 無機非金屬材料的測試.依照Boehme使用砂輪進行磨損試驗.砂輪法
| Testing of inorganic non-metallic materials - Wear test using the grinding wheel according to B?hme - Grinding wheel method
|
| DIN 65470-1989
| 航空航天.金屬材料焊接用焊接填充金屬.技術規范
| Aerospace; filler metals for welding metallic materials; technical specification
|
| DIN 8528-1-1973
| 可焊性:第1部分:金屬材料定義
| Weldability; Metallic Materials, Definitions
|
| DIN 8562-1975
| 容器的焊接.金屬材料容器，焊接原理
| Welding of Vessels; Vessels of Metallic Materials, Principles for Welding
|
| DIN EN 10002-1-2001
| 金屬材料.拉力試驗.第1部分:室溫下的試驗方法
| Metallic materials - Tensile testing - Part 1: Method of testing at ambient temperature; German version EN 10002-1:2001
|
| DIN EN 10002-5-1992
| 金屬材料的抗拉試驗.第5部分:高溫檢驗法
| Tensile testing of metallic materials; method of testing at elevated temperature; german version EN 10002-5:1991
|
| DIN EN 10036-1990
| 黑色金屬材料的化學分析.鋼和生鐵中碳總含量的測定.在氧氣流中燃燒后重量分析測定法
| Chemical analysis of ferrous materials; determination of total carbon in steel and iron; gravimetric method after combustion in a stream of oxygen; German version EN 10036:1989
|
| DIN EN 10045-1-1991
| 金屬材料的擺錘式?jīng)_擊試驗.第1部分:試驗方法
| Charpy impact test on metallic materials; part 1: test method; german version EN 10045-1:1990
|
| DIN EN 10045-2-1993
| 金屬材料.擺錘式?jīng)_擊試驗.第2部分:試驗機的驗證(擺錘式?jīng)_擊試驗機)
| Metallic materials; Charpy impact test; part 2: verification of the testing machine (pendulum impact); german version EN 10045-2:1992
|
| DIN EN 10071-1990
| 黑色金屬材料的化學分析.鋼和鐵中錳含量的測定.電測滴定法
| Chemical analysis of ferrous materials; determination of manganese in steel and iron; electrometric titration method; german version EN 10071:1989
|
| DIN EN 1011-1-2002
| 焊接.金屬材料焊接的推薦標準.第1部分:電弧焊的一般指南 (包括修改件 A1:2002); 德文版本 EN 1011-1:1998 +
| Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding (includes amendment A1:2002); German version EN 1011-1:1998 + A1:2002
|
| DIN EN 1011-2-2001
| 焊接.焊接金屬材料推薦標準.第2部分:鐵素體鋼電弧焊
| Welding - Recommendation for welding of metallic materials - Part 2: Arc welding of ferritic steels; German version EN 1011-2:2001
|
| DIN EN 1011-3-2001
| 焊接.焊接金屬材料推薦標準.第3部分:不銹鋼電弧焊
| Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels; German version EN 1011-3:2000
|
| DIN EN 1011-4-2001
| 焊接.焊接金屬材料推薦標準.第4部分:鋁和鋁合金電弧焊
| Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys; German version EN 1011-4:2000
|
| DIN EN 1011-5-2003
| 焊接.金屬材料焊接的推薦規范.第5部分:包層鋼的焊接
| Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steel; German version EN 1011-5:2003
|
| DIN EN 1011-6-2006
| 焊接.金屬材料焊接的推薦標準.第6部分:激光射線焊接.德文版本EN 1011-6-2005
| Welding - Recommendation for welding of metallic materials - Part 6: Laser beam welding; German version EN 1011-6:2005
|
| DIN EN 1011-7-2004
| 焊接.焊接金屬材料的建議.第7部分:電子束焊接
| Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding; German version EN 1011-7:2004
|
| DIN EN 1011-8-2005
| 焊接.金屬材料的焊接建議.第8部分:鑄鐵的焊接
| Welding - Recommendations for welding of metallic materials - Part 8: Welding of cast irons; German version EN 1011-8:2004
|
| DIN EN 10136-1990
| 黑色金屬材料的化學分析.鋼鐵中鎳含量的測定.火焰原子吸收分光光度測定法
| Chemical analysis of ferrous materials; determination of nickel in steel and iron; flame atomic absorption spectrometric method; German version EN 10136:1989
|
| DIN EN 10177-1990
| 黑色金屬材料的化學分析.鋼中鈣的測定.火焰原子吸收分光光度測定法
| Chemical analysis of ferrous materials; determination of calcium in steels; flame atomic absorption spectrometric method; german version EN 10177:1989
|
| DIN EN 10178-1990
| 黑色金屬材料的化學分析.鋼材中鈮含量的測定.分光光度分析法
| Chemical analysis of ferrous materials; determination of niobium in steels; spectrophotometric method; german version EN 10178:1989
|
| DIN EN 10179-1990
| 黑色金屬材料的化學分析.鋼中氮(痕量)的測定.分光光度測定法
| Chemical analysis of ferrous materials; determination of nitrogen (trace amounts) in steels; spectrophotometric method; German version EN 10179:1989
|
| DIN EN 10181-1990
| 黑色金屬材料的化學分析.鋼中鉛的測定.火焰原子吸收分光光度測定法
| Chemical analysis of ferrous materials; determination of lead in steels; flame atomic absorption spectrometric method; German version EN 10181:1989
|
| DIN EN 10184-2006
| 黑色金屬材料的化學分析.非合金鋼鐵中磷測定.鉬蘭分光光度測量法
| Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method; English version of DIN EN 10184:2006-05
|
| DIN EN 10188-1990
| 黑色金屬材料的化學分析.鋼鐵中鉻的測定.火焰原子吸收光譜測定法
| Chemical analysis of ferrous materials; determination of chromium in steels and iron; flame atomic absorption spectrometric method; German version EN 10188:1989
|
| DIN EN 10200-1992
| 黑色金屬材料的化學分析.鋼中硼含量的測定.分光光度法
| Chemical analysis of ferrous materials; determination of boron in steel by spectrophotometry; german version EN 10200:1991
|
| DIN EN 10274-1999
| 金屬材料.重物墜落撕裂試驗
| Metallic materials - Drop weight tear test; German version EN 10274:1999
|
| DIN EN 10275-1999
| 金屬材料.管環液壓壓力試驗
| Metallic materials - Tube ring hydraulic pressure test; German version EN 10275:1999
|
| DIN EN 10291 Bb.1-2001
| 金屬材料.單軸蠕變拉伸試驗.試驗方法.應用說明
| Metallic materials - Uniaxial creep testing in tension - Method of test; indications for application
|
| DIN EN 10291-2001
| 金屬材料.單軸蠕變拉伸試驗.試驗方法
| Metallic materials - Uniaxial creep testing in tension - Method of test; German version EN 10291:2000
|
| DIN EN 10319-1-2003
| 金屬材料.拉伸應力松弛試驗.第1部分:試驗機規程
| Metallic materials - Tensile stress relaxation testing - Part 1: Procedure for testing machines; German version EN 10319-1:2003
|
| DIN EN 10319-2-2007
| 金屬材料.拉伸應力松弛試驗.第2部分:螺栓接合模型規程
| Metallic materials - Tensile stress relaxation testing - Part 2: Procedure for bolted joint models; English version of DIN EN 10319-2:2007-01
|
| DIN EN 1043-1-1996
| 金屬材料焊接破壞試驗.硬度試驗.第1部分:電弧焊接縫硬度試驗
| Destructive test on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints; German version EN 1043-1:1995
|
| DIN EN 1043-2-1996
| 金屬材料焊縫破壞試驗.硬度試驗.第2部分:焊接接縫顯微硬度試驗
| Destructive test on welds in metallic materials - Hardness test - Part 2: Micro hardness testing on welded joints; German version EN 1043-2:1996
|
| DIN EN 12062-2002
| 焊縫的無損檢驗.金屬材料的一般規則; 德文版本 EN 12062:1997 + A1:2002
| Non-destructive testing of welds - General rules for metallic materials; German version EN 12062:1997 + A1:2002
|
| DIN EN 12500-2000
| 金屬材料防腐.大氣環境腐蝕概率.大氣環境腐蝕性的分類、測定和評估
| Protection of metallic materials against corrosion - Corrosion likelihood in atmospheric environment - Classification, determination and estimation of corrosivity of atmospheric environments; German version EN 12500:2000
|
| DIN EN 12501-1-2003
| 金屬材料防腐.土壤腐蝕可能性.第1部分:總則
| Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 1: General; German version EN 12501-1:2003
|
| DIN EN 12501-2-2003
| 金屬材料防腐措施.土壤中腐蝕似然性.第2部分:低合金和非合金黑色金屬材料
| Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2: Low alloyed and non alloyed ferrous materials; German version EN 12501-2:2003
|
| DIN EN 12502-1-2005
| 金屬材料防腐蝕保護.配水和蓄水系統中腐蝕可能性的評價指南.第1部分:總則
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 1: General; German version EN 12502-1:2004
|
| DIN EN 12502-3-2005
| 金屬材料防腐蝕保護.配水和蓄水系統中腐蝕可能性的評價指南.第3部分:熱浸鍍鋅亞鐵材料的影響因素
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 3: Influencing factors for hot dip galvanised ferrous materials; German version EN 12502-3:2004
|
| DIN EN 12502-4-2005
| 金屬材料防腐蝕保護.配水和蓄水系統中腐蝕可能性的評價指南.第4部分:不銹鋼的影響因素
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 4: Influencing factors for stainless steels; German version EN 12502-4:2004
|
| DIN EN 12502-5-2005
| 金屬材料防腐蝕保護.配水和蓄水系統中腐蝕可能性的評價指南.第5部分:鑄鐵、非合金和低合金鋼的影響因素
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 5: Influencing factors for cast iron, unalloyed and low alloyed steels; German version EN 12502-5:2004
|
| DIN EN 13068-3-2001
| 無損檢驗.放射檢驗.第2部分:采用χ和伽瑪射線對金屬材料進行放射檢驗的一般原則; 德文版本 EN 13068-3:2001
| Non-destructive testing - Radioscopic testing - Part 3: General principles for the radioscopic testing of metallic materials by X- and gamma rays; German version EN 13068-3:2001
|
| DIN EN 1320-1996
| 金屬材料焊縫無損試驗.斷裂試驗
| Destructive tests on welds in metallic materials - Fracture test; German version EN 1320:1996
|
| DIN EN 1321-1996
| 金屬材料焊縫無損檢測.接縫宏觀和微觀檢驗
| Destructive tests of welds in metallic materials - Macroscopic and microscopic examination of welds; German version EN 1321:1996
|
| DIN EN 13397-2002
| 工業用閥門.金屬材料制隔膜閥門; 德文版本 EN 13397:2001
| Industrial valves - Diaphragm valves made of metallic materials; German version EN 13397:2001
|
| DIN EN 13479-2005
| 焊接消耗品.金屬材料熔焊用填充金屬和焊劑的一般產品標準
| Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials; German version EN 13479:2004
|
| DIN EN 1418-1998
| 焊接操作人員.全機加工的和自動焊接金屬材料的熔焊和電阻焊裝置操作員的批準試驗
| Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials; German version EN 1418:1997
|
| DIN EN 14784-2-2005
| 無損檢驗.儲磷成像板工業計算機射線照相.第2部分:用Χ射線和Υ射線檢驗金屬材料的一般原則
| Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays; German version EN 14784-2:2005
|
| DIN EN 14868-2005
| 抗腐蝕金屬材料的防護.閉水循環系統中腐蝕可能性評定指南
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems; German version EN 14868:2005
|
| DIN EN 1514-1-1997
| 法蘭盤及其連接件.有PN標識的法蘭盤用密封件尺寸.第1部分:帶或不帶襯墊的非金屬材料制扁平密封件
| Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts; German version EN 1514-1:1997
|
| DIN EN 2002-001 Berichtigung 1-2007
| 航空航天系列.金屬材料.試驗方法.第1部分:環境溫度下的抗拉測試
| Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature; German and English version EN 2002-001:2005, Corrigenda to DIN EN 2002-001:2006-11
|
| DIN EN 2002-001-2006
| 航天航空系列.金屬材料.試驗方法.第1部分:室溫下抗拉試驗
| Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature; German and English version EN 2002-001:2005
|
| DIN EN 2002-002 Berichtigung 1-2007
| 航空航天系列.金屬材料.試驗方法.第2部分:升溫抗拉測試
| Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature; German and English version EN 2002-002:2005, Corrigenda to DIN EN 2002-002:2006-11
|
| DIN EN 2002-002-2006
| 航天航空系列.金屬材料.試驗方法.第2部分:高溫下抗拉試驗
| Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature; German and English version EN 2002-002:2005
|
| DIN EN 2032-1-2003
| 航空航天系列.金屬材料.第1部分:常規命名
| Aerospace series - Metallic materials - Part 1: Conventional designation; German and English version EN 2032-1:2001
|
| DIN EN 2032-2-1994
| 航空航天系列.金屬材料.第2部分:供貨狀態下冶金狀態標志
| Aerospace series; metallic materials; part 2: coding of metallurgical condition in delivery condition; German version EN 2032-2:1994
|
| DIN EN 2078-2003
| 航空航天系列.金屬材料.生產進度圖表、檢驗進度圖表、檢驗和試驗報告;定義、總則、編制和批準
| Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report; Definition, general principles, preparation and approval; German and English version EN 2078:2001
|
| DIN EN 2243-1-2007
| 航空航天系列.非金屬材料.結構膠粘劑.試驗方法.第1部分:單面搭接剪切
| Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 1: Single lap shear; German and English version EN 2243-1:2005
|
| DIN EN 2243-2-2006
| 航空航天系列.非金屬材料.結構膠粘劑.試驗方法.第2部分:金屬與金屬間的剝離試驗
| Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal; German and English version EN 2243-2:2005
|
| DIN EN 2243-3-2006
| 航空航天系列.非金屬材料.結構膠粘劑.試驗方法.第3部分:金屬蜂窩狀?yuàn)A芯材料的剝離試驗
| Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 3: Peeling test metal-honeycomb core; German and English version EN 2243-3:2005
|
| DIN EN 2243-4-2006
| 航空航天系列.非金屬材料.結構膠粘劑.試驗方法.第4部分:金屬與蜂窩芯平面的拉伸試驗
| Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 4: Metal-honeycomb core flatwise tensile test; German and English version EN 2243-4:2005
|
| DIN EN 2243-5-2006
| 航空航天系列.非金屬材料.結構膠粘劑.試驗方法.第5部分:老化試驗
| Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests; German and English version EN 2243-5:2005
|
| DIN EN 2243-6-2006
| 航空航天系列.非金屬材料.結構膠粘劑.試驗方法.第6部分:抗剪應力和剪切應變的測定
| Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain; German and English version EN 2243-6:2005
|
| DIN EN 2310-1991
| 航空航天.非金屬材料耐燃燒額定值的試驗方法
| Aerospace series; test methods for the flame resistance rating of non-metallic materials; german version EN 2310:1991
|
| DIN EN 2667-6-2003
| 航空航天系列.非金屬材料.泡沫結構粘合劑.試驗方法.第6部分:測定吸水率
| Aerospace series - Non-metallic materials; Foaming structural adhesives; Test methods - Part 6: Determination of water absorption; German and English version EN 2667-6:2001
|
| DIN EN 2744-1992
| 航空航天.非金屬材料.優選的試驗溫度
| Aerospace series; non-metallic materials; preferred test temperatures; german version EN 2744:1992
|
| DIN EN 2781-1998
| 航空航天系列.非金屬材料.結構件膠粘劑.試驗方法.底層涂料厚度的測定
| Aerospace series - Non-metallic materials; structural adhesives - Test methods; determination of the primer thickness; German version EN 2781:1998
|
| DIN EN 4000-2003
| 航空航天系列.金屬材料.金屬半成品尺寸標準的起草和說明規則
| Aerospace series - Metallic materials - Rules for the drafting and presentation of dimensional standards for metallic semi-finished products; German and English version EN 4000:2001
|
| DIN EN 4258-1998
| 航空航天系列.金屬材料.標準化工作的一般組織.歐洲標準類型之間的聯系及其應用
| Aerospace series - Metallic materials - General organization of standardization; links between types of EN standards and their use; German version EN 4258:1998
|
| DIN EN 4415-2007
| 航空航天系列.非金屬材料.紡織材料.帶機織物.技術規范
| Aerospace series - Non-metallic materials - Textiles - Narrow woven fabrics - Technical specification; German and English version EN 4415:2006
|
| DIN EN 4416-2007
| 航空航天系列.非金屬材料.紡織材料.寬機織物.技術規范
| Aerospace series - Non-metallic materials - Textiles - Wide woven fabrics - Technical specification; German and English version EN 4416:2006
|
| DIN EN 444-1994
| 無損檢驗.用χ射線和γ射線對金屬材料作射線照相檢驗的一般原則; 德文版本 EN 444:1994
| Non-destructive testing; general principles for the radiographic examination of metallic materials using X-rays and gamma-rays; German version EN 444:1994
|
| DIN EN 462-3-1996
| 無損檢測.放射照片質量.第3部分:黑色金屬材料照片質量等級
| Non-destructive testing - Image quality of radiogrammes - Part 3: Image quality classes for ferrous metals; German version EN 462-3:1996
|
| DIN EN 764-4-2003
| 壓力設備.金屬材料交貨技術條件的規定
| Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials; German version EN 764-4:2002
|
| DIN EN 764-5-2003
| 壓力設備.第5部分:金屬材料檢驗文件及材料規范
| Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification; German version EN 764-5:2002
|
| DIN EN 875-1995
| 金屬材料焊接破壞試驗.沖擊試驗.試樣定位、切口定向和檢查
| Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination; German version EN 875:1995
|
| DIN EN 876-1995
| 金屬材料焊接的破壞試驗.有熔焊接頭的焊接金屬的縱向拉伸試驗
| Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints; German version EN 876:1995
|
| DIN EN 895-1999
| 金屬材料焊接破壞試驗.橫向拉伸試驗
| Destructive tests on welds in metallic materials - Transverse tensile test; German version EN 895:1995
|
| DIN EN 910-1996
| 金屬材料上焊接接縫的破壞試驗.彎曲試驗
| Destructive test on welds in metallic materials - Bend tests; German version EN 910:1996
|
| DIN EN ISO 10271 Berichtigung 1-2006
| 牙科金屬材料.腐蝕試驗方法
| Dental metallic materials - Corrosion test methods (ISO 10271:2001); German version EN ISO 10271:2001, Corrigenda to DIN EN ISO 10271:2002-01; German version EN ISO 10271:2001/AC:2006
|
| DIN EN ISO 10271-2002
| 牙科金屬材料.腐蝕試驗方法
| Dental metallic materials - Corrosion test methods (ISO 10271:2001); German version EN ISO 10271:2001
|
| DIN EN ISO 11114-1-1998
| 可運輸氣瓶.裝有氣體的氣瓶及其閥門材料的相容性.第1部分:金屬材料
| Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:1997) (includes corrigendum AC:1998); German version EN ISO 11114-1:1997
|
| DIN EN ISO 11114-2-2001
| 可運輸氣瓶.氣瓶及閥門材料與內裝氣體的兼容性.第2部分:非金屬材料
| Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2000); German version EN ISO 11114-2:2000
|
| DIN EN ISO 11114-4-2005
| 移動氣瓶.氣瓶和瓶閥材料與盛裝氣體的相容性.第4部分:選擇耐氫脆的金屬材料的試驗方法
| Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement (ISO 11114-4:2005); German version EN ISO 11114-4:2005
|
| DIN EN ISO 12737-2005
| 金屬材料.平面變形斷裂韌性的測定
| Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2005); German version EN ISO 12737:2005
|
| DIN EN ISO 14554-1-2000
| 焊接質量要求.金屬材料的電阻焊接.第1部分:綜合質量要求
| Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2000); German version EN ISO 14554-1:2000
|
| DIN EN ISO 14554-2-2000
| 焊接質量要求.金屬材料的電阻焊接.第2部分:基本質量要求
| Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements (ISO 14554-2:2000); German version EN ISO 14554-2:2000
|
| DIN EN ISO 14555-2006
| 焊接.金屬材料的電弧螺柱焊接
| Welding - Arc stud welding of metallic materials (ISO 14555:2006); English version of DIN EN ISO 14555:2006-12
|
| DIN EN ISO 14577-1-2003
| 金屬材料.硬度和材料參數的儀器壓痕試驗.第1部分:試驗方法
| Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2002); German version EN ISO 14577-1:2002
|
| DIN EN ISO 14577-2-2003
| 金屬材料.硬度和材料參數的儀器壓痕試驗.第2部分:試驗機檢定和校準
| Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2002); German version EN ISO 14577-2:2002
|
| DIN EN ISO 14577-3-2003
| 金屬材料.硬度和材料參數的儀器壓痕試驗.第3部分:硬度標準塊的校準
| Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002); German version EN ISO 14557-3:2002
|
| DIN EN ISO 14577-4-2007
| 金屬材料.硬度和材料參數用儀器壓痕試驗.第4部分:金屬和非金屬覆層試驗方法(ISO 14577-4-2007)
| Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2007); German version EN ISO 14577-4:2007
|
| DIN EN ISO 15607-2004
| 金屬材料焊接程序規范和合格鑒定.總則
| Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003); German version EN ISO 15607:2003
|
| DIN EN ISO 15609-1-2005
| 金屬材料焊接程序的規范和合格鑒定.焊接程序規范.第1部分:弧焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004); German version EN ISO 15609-1:2004
|
| DIN EN ISO 15609-2-2001
| 金屬材料焊接程序規范和合格鑒定.焊接程序規范.第2部分:氣焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2001); German version EN ISO 15609-2:2001
|
| DIN EN ISO 15609-3-2004
| 金屬材料焊接程序的規范和合格評定.焊接程序規范.第3部分:電子束焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 3: Electron beam welding (ISO 15609-3:2004); German version EN ISO 15609-3:2004
|
| DIN EN ISO 15609-4-2004
| 金屬材料焊接程序的規范和合格評定.焊接程序規范.第4部分:激光束焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO 15609-4:2004); German version EN ISO 15609-4:2004
|
| DIN EN ISO 15609-5-2004
| 金屬材料焊接程序的規范和合格評定.焊接程序規范.第5部分:電阻焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO 15609-5:2004); German version EN ISO 15609-5:2004
|
| DIN EN ISO 15610-2004
| 金屬材料焊接過程的規范和合格鑒定.基于已試驗過的焊接耗材的合格鑒定
| Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003); German version EN ISO 15610:2003
|
| DIN EN ISO 15611-2004
| 金屬材料焊接程序規范和合格鑒定.根據已有的焊接經驗進行合格鑒定
| Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2003); German version EN ISO 15611:2003
|
| DIN EN ISO 15612-2004
| 金屬材料焊接程序的規范和合格評定.通過采用標準焊接程序的合格評定
| Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004); German version EN ISO 15612:2004
|
| DIN EN ISO 15613-2004
| 金屬材料焊接程序的規范和合格鑒定.基于生產前焊接試驗的合格鑒定
| Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004); German version EN ISO 15613:2004
|
| DIN EN ISO 15614-1-2004
| 金屬材料焊接程序的規范和鑒定.焊接程序試驗.第1部分:鋼的弧焊接和氣焊接以及鎳和鎳合金的弧焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004); German version EN ISO 15614-1:2004
|
| DIN EN ISO 15614-10-2005
| 金屬材料焊接過程的規范和鑒定.焊接程序試驗.第10部分:高壓干焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 10: Hyperbaric dry welding (ISO 15614-10:2005); German version EN ISO 15614-10:2005
|
| DIN EN ISO 15614-11-2002
| 金屬材料焊接程序的規范和鑒定.焊接程序試驗.第11部分:電子和激光束焊接 (ISO 15614-11:2002); 德文版本 EN
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002); German version EN ISO 15614-11:2002
|
| DIN EN ISO 15614-12-2004
| 金屬材料焊接程序的規范和鑒定.焊接程序試驗.第12部分:點焊、縫焊和凸焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding (ISO 15614-12:2004); German version EN ISO 15614-12:2004
|
| DIN EN ISO 15614-13-2005
| 金屬材料焊接過程的規范和鑒定.焊接程序試驗.第13部分:電阻對焊和閃光焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Resistance butt and flash welding (ISO 15614-13:2005); German version EN ISO 15614-13:2005
|
| DIN EN ISO 15614-2-2005
| 金屬材料焊接程序的規范和鑒定.焊接程序試驗.第2部分:鋁及其合金的弧焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005); German version EN ISO 15614-2:2005
|
| DIN EN ISO 15614-4-2005
| 金屬材料焊接程序的規范和鑒定.焊接程序試驗.第4部分:鋁鑄件的精焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005); German version EN ISO 15614-4:2005
|
| DIN EN ISO 15614-5-2004
| 金屬材料焊接程序的規范和鑒定.焊接程序試驗.第5部分:鈦、鋯及其合金的電弧焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004); German version EN ISO 15614-5:2004
|
| DIN EN ISO 15614-6-2007
| 金屬材料焊接程序的規范和鑒定.焊接程序試驗.第6部分:銅及其合金的電弧焊接和氣焊(ISO 15614-6-2006)
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006); English version of DIN EN ISO 15614-6:2007-01
|
| DIN EN ISO 15614-7-2007
| 金屬材料焊接程序的規范和鑒定.焊接程序試驗.第7部分:覆蓋焊接(ISO 15614-7:2007)
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2007); German version EN ISO 15614-7:2007
|
| DIN EN ISO 15614-8-2002
| 金屬材料焊接程序規范和資格.焊接程序試驗.第8部分:管對管板連接件的焊接 (ISO 15614-8:2002); 德文版本 EN
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002); German version EN ISO 15614-8:2002
|
| DIN EN ISO 15620-2000
| 焊接.金屬材料的摩擦焊接
| Welding - Friction welding of metallic materials (ISO 15620:2000); German version EN ISO 15620:2000
|
| DIN EN ISO 17641-1-2004
| 金屬材料焊接的有損檢驗.焊件的熱裂試驗.弧焊過程.第1部分:通則
| Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 1: General (ISO 17641-1:2004); German version EN ISO 17641-1:2004
|
| DIN EN ISO 17641-2-2005
| 金屬材料焊接的有損試驗.焊接的熱裂試驗.弧焊工藝.第2部分:自束試驗
| Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17641-2:2005); German version EN ISO 17641-2:2005
|
| DIN EN ISO 17642-1-2004
| 金屬材料的焊接的有損試驗.焊件的冷裂試驗.弧焊過程.第1部分:通則
| Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 1: General (ISO 17642-1:2004); German version EN ISO 17642-1:2004
|
| DIN EN ISO 17642-2-2005
| 金屬材料焊接的有損試驗.焊接的冷裂試驗.弧焊工藝.第2部分:自束試驗
| Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17642-2:2005); German version EN ISO 17642-2:2005
|
| DIN EN ISO 17642-3-2005
| 金屬材料焊接的有損試驗.焊接的冷裂試驗.弧焊工藝.第3部分:外部荷載試驗
| Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO 17642-3:2005); German version EN ISO 17642-3:2005
|
| DIN EN ISO 17653-2003
| 金屬材料焊縫破壞檢驗.電阻點焊扭轉試驗
| Destructive tests on welds in metallic materials - Torsion test of resistance spot welds (ISO 17653:2003); German version EN ISO 17653:2003
|
| DIN EN ISO 17654-2003
| 金屬材料焊縫破壞檢驗.電阻焊.電阻縫焊壓力試驗
| Destructive tests on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds (ISO 17654:2003); German version EN ISO 17654:2003
|
| DIN EN ISO 17655-2003
| 金屬材料焊縫破壞檢驗.δ鐵素體測量樣品制備方法
| Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement (ISO 17655:2003); German version EN ISO 17655:2003
|
| DIN EN ISO 18265-2004
| 金屬材料.硬度值的換算
| Metallic materials - Conversion of hardness values (ISO 18265:2003); German version EN ISO 18265:2003
|
| DIN EN ISO 18278-1-2005
| 電阻焊.可焊性.第1部分:金屬材料的電阻點焊、縫焊和凸焊的可焊性評定
| Resistance welding - Weldability - Part 1: Assessment of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2004); German version EN ISO 18278-1:2004
|
| DIN EN ISO 20482-2003
| 金屬材料.薄板材和帶材.埃里克森壓凹試驗
| Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2003); German version EN ISO 20482:2003
|
| DIN EN ISO 22674-2007
| 牙科.固定和可移動復位的金屬材料和器具
| Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2006); English version of DIN EN ISO 22674:2007-02
|
| DIN EN ISO 2738-2000
| 不包括硬金屬的燒結金屬材料.滲透性燒結金屬材料.密度、油含量和開孔率的測定
| Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999); German version EN ISO 2738:1999
|
| DIN EN ISO 2740-2007
| 燒結金屬材料(不包括硬質合金).拉力試件
| Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2007); German version EN ISO 2740:2007
|
| DIN EN ISO 3325-2002
| 包括硬質合金的燒結金屬材料.橫向斷裂強度的測定 (ISO 3325:1996 + AMD 1:2001) (包括修改件A1:2002); 德文
| Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength (ISO 3325:1996 + AMD 1:2001) (includes Amendment A1:2002); German version EN ISO 3325:1999 + A1:2002
|
| DIN EN ISO 376-2005
| 金屬材料.單軸向試驗機驗證用作用力檢驗儀的校準
| Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2004); German version EN ISO 376:2004
|
| DIN EN ISO 3785-2006
| 金屬材料.關于產品質地的試驗樣品軸的命名
| Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2006); English version of DIN EN ISO 3785:2006-05
|
| DIN EN ISO 3834-1-2006
| 金屬材料的熔化焊質量要求.第1部分:質量要求的適當?shù)燃?jí)的選擇標準
| Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2005); German version EN ISO 3834-1:2005
|
| DIN EN ISO 3834-2-2006
| 金屬材料熔焊的質量要求.第2部分:綜合質量要求(ISO 3834-2-2005).德文版本EN ISO 3834-2:2005
| Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005); German version EN ISO 3834-2:2005
|
| DIN EN ISO 3834-3-2006
| 金屬材料熔焊的質量要求.第3部分:標準質量要求(ISO 3834-3-2005).德文版本EN ISO 3834-3:2005
| Quality requirements for fusion welding for metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2005); German version EN ISO 3834-3:2005
|
| DIN EN ISO 3834-4-2006
| 金屬材料熔焊的質量要求.第4部分:基本質量要求(ISO 3834-4-2005).德文版本EN ISO 3834-4:2005
| Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2005); German version EN ISO 3834-4:2005
|
| DIN EN ISO 3834-5-2006
| 金屬材料的熔焊質量要求.第5部分:有必要聲明和ISO 3834-2、 ISO 3834-3或ISO 3834-4質量要求一致的文件
| Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2005); German version EN ISO 3834-5:2005
|
| DIN EN ISO 3892-2001
| 金屬材料轉化涂層.單位面積涂層質量測定.稱重法
| Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods (ISO 3892:2000); German version EN ISO 3892:2001
|
| DIN EN ISO 3928-2006
| 不包括硬質金屬的燒結金屬材料.疲勞試驗試樣
| Sintered metal materials, excluding hardmetals - Fatigue test pieces (ISO 3928:1999); English version of DIN EN ISO 3928:2006-06
|
| DIN EN ISO 4022-2006
| 可滲透性燒結金屬材料.液體滲透性的測定
| Permeable sintered metal materials - Determination of fluid permeability (ISO 4022:1987); English version of DIN EN ISO 4022:2006-06
|
| DIN EN ISO 4498-2007
| 不包括硬質金屬的燒結金屬材料.表觀硬度和顯微硬度的測定
| Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2005); German version EN ISO 4498:2007
|
| DIN EN ISO 4545-1-2006
| 金屬材料.硬度試驗.第1部分:試驗方法(ISO 4545-1-2005).德文版本EN ISO 4545-1-2005
| Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2005); German version EN ISO 4545-1:2005
|
| DIN EN ISO 4545-2-2006
| 金屬材料.硬度試驗.第2部分:試驗機的驗證和校準(ISO 4545-2-2005).德文版本EN ISO 4545-2:2005
| Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines (ISO 4545-2:2005); German version EN ISO 4545-2:2005
|
| DIN EN ISO 4545-3-2006
| 金屬材料.硬度試驗.第3部分:標準塊的校準(ISO 4545-3-2005).德文版本EN ISO 4545-3:2005
| Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO 4545-3:2005); German version EN ISO 4545-3:2005
|
| DIN EN ISO 4545-4-2006
| 金屬材料.硬度試驗.第4部分:硬度值表(ISO 4545-4-2005).德文版本EN ISO 4545-4:2005
| Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO 4545-4:2005); German version EN ISO 4545-4:2005
|
| DIN EN ISO 6506-1-2006
| 金屬材料.布氏硬度試驗.第1部分:試驗方法
| Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2005); German version EN ISO 6506-1:2005
|
| DIN EN ISO 6506-2-2006
| 金屬材料.布氏硬度試驗.第2部分:試驗機的檢驗和校準
| Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2005); German version EN ISO 6506-2:2005
|
| DIN EN ISO 6506-3-2006
| 金屬材料.布氏硬度試驗.第3部分:基準塊的校準
| Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2005); German version EN ISO 6506-3:2005
|
| DIN EN ISO 6507-1-2006
| 金屬材料.維氏硬度試驗.第1部分:試驗方法
| Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2005); German version EN ISO 6507-1:2005
|
| DIN EN ISO 6507-2-2006
| 金屬材料.維氏硬度試驗.第2部分:試驗機的檢驗和校準
| Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2005); German version EN ISO 6507-2:2005
|
| DIN EN ISO 6507-3-2006
| 金屬材料.維氏硬度試驗.第3部分:基準塊的校準
| Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2005); German version EN ISO 6507-3:2005
|
| DIN EN ISO 6507-4-2006
| 金屬材料.維氏硬度試驗.第4部分:硬度值表(ISO 6507-4-2005).德文版本EN ISO 6507-4:2005
| Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2005); German version EN ISO 6507-4:2005
|
| DIN EN ISO 6508-1-2006
| 金屬材料.洛氏硬度試驗.第1部分:試驗方法(A、B、C、D、E、F、G、H、K、N、T刻度)
| Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-1:2005); German version EN ISO 6508-1:2005
|
| DIN EN ISO 6508-2-2006
| 金屬材料.洛氏硬度試驗.第2部分:試驗機的檢驗和校準(A、B、C、D、E、F、G、H、K、N、T刻度)
| Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-2:2005); German version EN ISO 6508-2:2005
|
| DIN EN ISO 6508-3-2006
| 金屬材料.洛氏硬度試驗.第3部分:基準塊的校準(A、B、C、D、E、F、G、H、K、N、T刻度)
| Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-3:2005); German version EN ISO 6508-3:2005
|
| DIN EN ISO 6520-1-2007
| 焊接及相關工藝.金屬材料幾何缺陷分類.第1部分:氧炔焊
| Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007); Trilingual version EN ISO 6520-1:2007
|
| DIN EN ISO 6520-2-2002
| 焊接及相關工藝.金屬材料中幾何缺陷的分類.第2部分:壓力焊(ISO 6520-2:2001); 德文版本 EN ISO 6520-2:2001
| Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure (ISO 6520-2:2001); German version EN ISO 6520-2:2001
|
| DIN EN ISO 7153-1-2001
| 外科儀器.金屬材料.第1部分:不銹鋼
| Surgical instruments - Metallic materials - Part 1: Stainless steel (ISO 7153-1:1991, including Amendment 1:1999); German version EN ISO 7153-1:2000
|
| DIN EN ISO 7438-2005
| 金屬材料.彎曲試驗
| Metallic materials - Bend test (ISO 7438:2005); German version EN ISO 7438:2005
|
| DIN EN ISO 7500-1 Bb.1-1999
| 金屬材料.靜態單軸向試驗機的驗證.第1部分:拉伸/壓縮試驗機.力測量系統的驗證與校正.拉伸、壓縮及彎曲試驗
| Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of tension, compression and flexion testing machines
|
| DIN EN ISO 7500-1 Bb.2-1999
| 金屬材料.靜態單軸壓縮試驗機的驗證.第1部分:拉伸/壓縮試驗機.測力系統的驗證與校準.彈簧試驗機的要求、驗
| Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of spring testing machines
|
| DIN EN ISO 7500-1 Bb.3-1999
| 金屬材料.靜態單軸壓縮試驗機的驗證.第1部分:拉伸/壓縮試驗機.測力系統的驗證與校準.疲勞試驗機的要求、驗
| Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of fatigue testing machines
|
| DIN EN ISO 7500-1-2004
| 金屬材料.靜態單軸向試驗機的驗證.第1部分:拉伸/壓縮試驗機.力測量系統的驗證和校正
| Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004); German version EN ISO 7500-1:2004
|
| DIN EN ISO 7500-2-2007
| 金屬材料.靜態非同軸試驗機校驗.第2部分:拉伸蠕變?cè)囼?yàn)機.外加力校驗
| Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied force (ISO 7500-2:2006); English version of DIN EN ISO 7500-2:2007-04
|
| DIN EN ISO 7799-2000
| 金屬材料.厚度3mm或小于3mm的板材或帶材.反向彎曲試驗
| Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985); German version EN ISO 7799:2000
|
| DIN EN ISO 8491-2004
| 金屬材料.管(全截面).彎曲試驗
| Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998); German version EN ISO 8491:2004
|
| DIN EN ISO 8492-2004
| 金屬材料.管.壓扁試驗
| Metallic materials - Tube - Flattening test (ISO 8492:1998); German version EN ISO 8492:2004
|
| DIN EN ISO 8493-2004
| 金屬材料.管.擴口試驗
| Metallic materials - Tube - Drift-expanding test (ISO 8493:1998); German version EN ISO 8493:2004
|
| DIN EN ISO 8494-2004
| 金屬材料.管.卷邊試驗
| Metallic materials - Tube - Flanging test (ISO 8494:1998); German version EN ISO 8494:2004
|
| DIN EN ISO 8495-2004
| 金屬材料.管.環形擴口試驗
| Metallic materials - Tube - Ring-expanding test (ISO 8495:1998); German version EN ISO 8495:2004
|
| DIN EN ISO 8496-2004
| 金屬材料.管.環形拉伸試驗
| Metallic materials - Tube - Ring tensile test (ISO 8496:1998); German version EN ISO 8496:2004
|
| DIN EN ISO 9018-2004
| 金屬材料焊縫的破壞試驗.十字形和搭接焊縫抗拉試驗
| Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints (ISO 9018:2003); German version EN ISO 9018:2003
|
| DIN EN ISO 9513 Bb.1-2003
| 金屬材料.單軸試驗伸長計校準.機械伸長計及其校準示例
| Metallic materials - Calibration of extensometers used in uniaxial testing - Examples for mechanical extensometers and their calibration
|
| DIN EN ISO 9513 Bb.2-2005
| 金屬材料.單軸向試驗用伸長計的校準.激光伸長計系統及其校準
| Metallic materials - Calibration of extensometers used in uniaxial testing - Laser extensometer systems and their calibration
|
| DIN EN ISO 9513 Bb.3-2005
| 金屬材料.單軸向試驗用伸長計的校準.視頻伸長計系統及其校準
| Metallic materials - Calibration of extensometers used in uniaxial testing - Video extensometer systems and their calibration
|
| DIN EN ISO 9513-2003
| 金屬材料.單軸試驗用伸長儀校正
| Metallic materials - Calibration of extensometers used in uniaxial testing (ISO 9513:1999); German version EN ISO 9513:2002
|
| DIN IEC 60468-1981
| 金屬材料電阻率測量方法
| Method of measurement of resistivity of metallic materials
|
| DIN IEC 60740-2-1995
| 電信和電子設備變壓器和電感器鐵芯片.第2部分:軟磁金屬材料制鐵芯片最小漏磁性規范
| Laminations for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Specification for the minimum permeabilities of laminations made of soft magnetic metallic materials (IEC 60740-2:1993)
|
| DIN ISO 15579-2002
| 金屬材料.低溫下張力試驗 (ISO 15579:2000)
| Metallic materials - Tensile testing at low temperature (ISO 15579:2000)
|
| DIN ISO 3312-1990
| 燒結金屬材料和硬質合金.楊氏模量的測定
| Sintered metal materials and hardmetals; determination of young modulus; identical with ISO 3312:1987
|
| DIN ISO 3369-1990
| 不可滲透性燒結金屬材料和硬質合金.密度的測定
| Impermeable sintered metal materials and hardmetals; determination of density; identical with ISO 3369:1975
|
| DIN ISO 4003-1990
| 滲透性燒結金屬材料.起泡試驗孔隙大小的測定
| Permeable sintered metal materials; determination of bubble test pore size; identical with ISO 4003:1977
|
| DIN ISO 5754-1990
| 燒結金屬材料(不包括硬質合金).無切口沖擊試件
| Sintered metal materials, excluding hardmetalls; unnotched impact test piece; identical with ISO 5754:1978
|
| DIN ISO 5755-2004
| 燒結金屬材料.規范
| Sintered metal materials - Specifications (ISO 5755:2001)
|
| DIN ISO 5832-1-2000
| 外科植入物.金屬材料.第1部分:鍛造不銹鋼
| Implants for surgery - Metallic materials - Part 1: Wrought stainless steel (ISO 5832-1:1997)
|
| DIN ISO 5832-11-2001
| 外科植入物.金屬材料.第11部分:鍛制6鈦/7鋁/鈮合金
| Implants for surgery - Metallic materials - Part 11: Wrought titanium-6-aluminium 7-niobium alloy (ISO 5832-11:1994)
|
| DIN ISO 5832-12-2000
| 外科植入物.金屬材料.第12部分:鍛造鈷鉻鉬合金
| Implants for surgery - Metallic materials - Part 12: Wrought cobalt-chromium-molybdenum alloy (ISO 5832-12:1996)
|
| DIN ISO 5832-2-2000
| 外科植入物.金屬材料.第2部分:非合金鈦
| Implants for surgery - Metallic materials - Part 2: Unalloyed titanium (ISO 5832-2:1999)
|
| DIN ISO 5832-3-2000
| 外科植入物.金屬材料.第3部分:鈦6-鋁4-釩鍛造合金
| Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:1996)
|
| DIN ISO 5832-4-2000
| 外科植入物.金屬材料.第4部分:鈷鉻鉬鑄造合金
| Implants for surgery - Metallic materials - Part 4: Cobalt-chromium-molybdenum casting alloy (ISO 5832-4:1996)
|
| DIN ISO 5832-5-2001
| 外科植入物.金屬材料.第5部分:.精制鈷-鉻-鎢-鎳合金 (ISO 5832-5:1993)
| Implants for surgery - Metallic materials - Part 5: Wrought cobalt-chromium-tungsten-nickel alloy (ISO 5832-5:1993)
|
| DIN ISO 5832-6-2001
| 外科植入物.金屬材料.第6部分:煅制鈷鎳鉻鉬合金
| Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy (ISO 5832-6:1997)
|
| DIN ISO 5832-7-2001
| 外科植入物.金屬材料.第7部分:可鍛和冷加工的鈷鉻鎳鉬鐵合金
| Implants for surgery - Metallic materials - Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy (ISO 5832-7:1994)
|
| DIN ISO 5832-8-2000
| 外科植入物.金屬材料.第8部分:鍛制鈷鎳鉻鉬鎢鐵合金
| Implants for surgery - Metallic materials - Part 8: Wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy (ISO 5832-8:1997)
|
| DIN ISO 5832-9-2000
| 外科植入物.金屬材料.第9部分:鍛造高氮不銹鋼
| Implants for surgery - Metallic materials - Part 9: Wrought high nitrogen stainless steel (ISO 5832-9:1992)
|
| DIN ISO 7625-1991
| 燒結金屬材料(不包括硬質合金).測定碳含量時化學分析用的樣品制備
| Sintered metal materials, excluding hardmetals; preparation of samples for chemical analysis for determination of carbon content; identical with ISO 7625:1983
|
| DIN ISO 9649-1993
| 金屬材料.金屬絲.反復扭曲試驗
| Metallic materials; wire; reverse torsion test; identical with ISO 9649:1990
|
| DIN V 1739-1996
| 金屬材料焊縫破壞性試驗.宏觀和微觀檢驗用浸蝕劑
| Destructive tests on welds in metallic materials - Etchants for macroscopic and microscopic examination (CR 12361:1996)
|
| DIN V 30995-1999
| 不包括硬金屬的燒結金屬材料.金相制備和檢驗
| Sintered metal materials, excluding hardmetals - Metallographic preparation and examination (ISO/TR 14321:1997)
|
| DIN V 65900-12-1997
| 航空航天.金屬材料.尺寸標準和材料標準對照關系
| Aerospace series - Metallic matrials - Relationship between dimensional standards and material standards (AECMA Technical Report TR 2410:1996)
|
| DIN V 65900-4-1993
| 航空和航天.金屬材料.AECMA名稱體系之間的關系
| Aerospace series; metallic materials; relationship between AECMA designation systems; identical with AECMA-technical report TR 3900:1993
|
| DIN-Fachbericht 17641-3-2004
| 金屬材料焊接的有損檢驗.焊件的熱裂紋試驗.弧焊過程.第3部分:外部負載試驗
| Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 3: Externally loaded test (ISO/TR 17641-3:2004); German translation of CEN ISO/TR 17641-3:2004
|
| DIN-Fachbericht CEN ISO/TR 15608-2006
| 焊接.金屬材料分類體系指南
| Welding - Guidelines for a metallic materials grouping system;German version CEN ISO/TR 15608:2005
|
| DIN-Fachbericht CEN ISO/TR 3834-6-2007
| 金屬材料氧炔焊的質量要求.第6部分:ISO 3834(ISO/TR 3834-6-2007)的實施指南
| Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834 (ISO/TR 3834-6:2007); German version CEN ISO/TR 3834-6:2007
|
| DIN-Fachbericht ISO/TR 581-2007
| 可焊性.金屬材料.一般原則
| Weldability - Metallic materials - General principles; German version ISO/TR 581:2005
|
| 編號 | 中文名稱 | 英文名稱 |
|---|